similarity index 77%
rename from docs/confidential-guest-support.txt
rename to docs/system/confidential-guest-support.rst
@@ -19,10 +19,10 @@ Running a Confidential Guest
To run a confidential guest you need to add two command line parameters:
-1. Use "-object" to create a "confidential guest support" object. The
+1. Use ``-object`` to create a "confidential guest support" object. The
type and parameters will vary with the specific mechanism to be
used
-2. Set the "confidential-guest-support" machine parameter to the ID of
+2. Set the ``confidential-guest-support`` machine parameter to the ID of
the object from (1).
Example (for AMD SEV)::
@@ -37,13 +37,8 @@ Supported mechanisms
Currently supported confidential guest mechanisms are:
-AMD Secure Encrypted Virtualization (SEV)
- docs/amd-memory-encryption.txt
-
-POWER Protected Execution Facility (PEF)
- docs/papr-pef.txt
-
-s390x Protected Virtualization (PV)
- docs/system/s390x/protvirt.rst
+* AMD Secure Encrypted Virtualization (SEV) (see :doc:`i386/amd-memory-encryption`)
+* POWER Protected Execution Facility (PEF) (see :ref:`power-papr-protected-execution-facility-pef`)
+* s390x Protected Virtualization (PV) (see :doc:`s390x/protvirt`)
Other mechanisms may be supported in future.
similarity index 62%
rename from docs/amd-memory-encryption.txt
rename to docs/system/i386/amd-memory-encryption.rst
@@ -1,3 +1,6 @@
+AMD Secure Encrypted Virtualization (SEV)
+=========================================
+
Secure Encrypted Virtualization (SEV) is a feature found on AMD processors.
SEV is an extension to the AMD-V architecture which supports running encrypted
@@ -24,17 +27,18 @@ the hypervisor to satisfy the requested function.
Launching
---------
+
Boot images (such as bios) must be encrypted before a guest can be booted. The
-MEMORY_ENCRYPT_OP ioctl provides commands to encrypt the images: LAUNCH_START,
-LAUNCH_UPDATE_DATA, LAUNCH_MEASURE and LAUNCH_FINISH. These four commands
+``MEMORY_ENCRYPT_OP`` ioctl provides commands to encrypt the images: ``LAUNCH_START``,
+``LAUNCH_UPDATE_DATA``, ``LAUNCH_MEASURE`` and ``LAUNCH_FINISH``. These four commands
together generate a fresh memory encryption key for the VM, encrypt the boot
images and provide a measurement than can be used as an attestation of a
successful launch.
-For a SEV-ES guest, the LAUNCH_UPDATE_VMSA command is also used to encrypt the
+For a SEV-ES guest, the ``LAUNCH_UPDATE_VMSA`` command is also used to encrypt the
guest register state, or VM save area (VMSA), for all of the guest vCPUs.
-LAUNCH_START is called first to create a cryptographic launch context within
+``LAUNCH_START`` is called first to create a cryptographic launch context within
the firmware. To create this context, guest owner must provide a guest policy,
its public Diffie-Hellman key (PDH) and session parameters. These inputs
should be treated as a binary blob and must be passed as-is to the SEV firmware.
@@ -45,37 +49,37 @@ in bad measurement). The guest policy is a 4-byte data structure containing
several flags that restricts what can be done on a running SEV guest.
See KM Spec section 3 and 6.2 for more details.
-The guest policy can be provided via the 'policy' property (see below)
+The guest policy can be provided via the ``policy`` property::
-# ${QEMU} \
- sev-guest,id=sev0,policy=0x1...\
+ # ${QEMU} \
+ sev-guest,id=sev0,policy=0x1...\
Setting the "SEV-ES required" policy bit (bit 2) will launch the guest as a
-SEV-ES guest (see below)
+SEV-ES guest::
-# ${QEMU} \
- sev-guest,id=sev0,policy=0x5...\
+ # ${QEMU} \
+ sev-guest,id=sev0,policy=0x5...\
The guest owner provided DH certificate and session parameters will be used to
establish a cryptographic session with the guest owner to negotiate keys used
for the attestation.
-The DH certificate and session blob can be provided via the 'dh-cert-file' and
-'session-file' properties (see below)
+The DH certificate and session blob can be provided via the ``dh-cert-file`` and
+``session-file`` properties::
-# ${QEMU} \
- sev-guest,id=sev0,dh-cert-file=<file1>,session-file=<file2>
+ # ${QEMU} \
+ sev-guest,id=sev0,dh-cert-file=<file1>,session-file=<file2>
-LAUNCH_UPDATE_DATA encrypts the memory region using the cryptographic context
-created via the LAUNCH_START command. If required, this command can be called
+``LAUNCH_UPDATE_DATA`` encrypts the memory region using the cryptographic context
+created via the ``LAUNCH_START`` command. If required, this command can be called
multiple times to encrypt different memory regions. The command also calculates
the measurement of the memory contents as it encrypts.
-LAUNCH_UPDATE_VMSA encrypts all the vCPU VMSAs for a SEV-ES guest using the
-cryptographic context created via the LAUNCH_START command. The command also
+``LAUNCH_UPDATE_VMSA`` encrypts all the vCPU VMSAs for a SEV-ES guest using the
+cryptographic context created via the ``LAUNCH_START`` command. The command also
calculates the measurement of the VMSAs as it encrypts them.
-LAUNCH_MEASURE can be used to retrieve the measurement of encrypted memory and,
+``LAUNCH_MEASURE`` can be used to retrieve the measurement of encrypted memory and,
for a SEV-ES guest, encrypted VMSAs. This measurement is a signature of the
memory contents and, for a SEV-ES guest, the VMSA contents, that can be sent
to the guest owner as an attestation that the memory and VMSAs were encrypted
@@ -85,27 +89,28 @@ Since the guest owner knows the initial contents of the guest at boot, the
attestation measurement can be verified by comparing it to what the guest owner
expects.
-LAUNCH_FINISH finalizes the guest launch and destroys the cryptographic
+``LAUNCH_FINISH`` finalizes the guest launch and destroys the cryptographic
context.
-See SEV KM API Spec [1] 'Launching a guest' usage flow (Appendix A) for the
+See SEV KM API Spec ([SEVKM]_) 'Launching a guest' usage flow (Appendix A) for the
complete flow chart.
-To launch a SEV guest
+To launch a SEV guest::
-# ${QEMU} \
- -machine ...,confidential-guest-support=sev0 \
- -object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=1
+ # ${QEMU} \
+ -machine ...,confidential-guest-support=sev0 \
+ -object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=1
-To launch a SEV-ES guest
+To launch a SEV-ES guest::
-# ${QEMU} \
- -machine ...,confidential-guest-support=sev0 \
- -object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=1,policy=0x5
+ # ${QEMU} \
+ -machine ...,confidential-guest-support=sev0 \
+ -object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=1,policy=0x5
An SEV-ES guest has some restrictions as compared to a SEV guest. Because the
guest register state is encrypted and cannot be updated by the VMM/hypervisor,
a SEV-ES guest:
+
- Does not support SMM - SMM support requires updating the guest register
state.
- Does not support reboot - a system reset requires updating the guest register
@@ -114,35 +119,42 @@ a SEV-ES guest:
manage booting APs.
Debugging
------------
+---------
+
Since the memory contents of a SEV guest are encrypted, hypervisor access to
the guest memory will return cipher text. If the guest policy allows debugging,
then a hypervisor can use the DEBUG_DECRYPT and DEBUG_ENCRYPT commands to access
the guest memory region for debug purposes. This is not supported in QEMU yet.
Snapshot/Restore
------------------
+----------------
+
TODO
Live Migration
-----------------
+---------------
+
TODO
References
------------------
+----------
-AMD Memory Encryption whitepaper:
-https://developer.amd.com/wordpress/media/2013/12/AMD_Memory_Encryption_Whitepaper_v7-Public.pdf
+`AMD Memory Encryption whitepaper
+<https://developer.amd.com/wordpress/media/2013/12/AMD_Memory_Encryption_Whitepaper_v7-Public.pdf>`_
-Secure Encrypted Virtualization Key Management:
-[1] http://developer.amd.com/wordpress/media/2017/11/55766_SEV-KM-API_Specification.pdf
+.. [SEVKM] `Secure Encrypted Virtualization Key Management
+ <http://developer.amd.com/wordpress/media/2017/11/55766_SEV-KM-API_Specification.pdf>`_
KVM Forum slides:
-http://www.linux-kvm.org/images/7/74/02x08A-Thomas_Lendacky-AMDs_Virtualizatoin_Memory_Encryption_Technology.pdf
-https://www.linux-kvm.org/images/9/94/Extending-Secure-Encrypted-Virtualization-with-SEV-ES-Thomas-Lendacky-AMD.pdf
-
-AMD64 Architecture Programmer's Manual:
- http://support.amd.com/TechDocs/24593.pdf
- SME is section 7.10
- SEV is section 15.34
- SEV-ES is section 15.35
+
+* `AMD’s Virtualization Memory Encryption (2016)
+ <http://www.linux-kvm.org/images/7/74/02x08A-Thomas_Lendacky-AMDs_Virtualizatoin_Memory_Encryption_Technology.pdf>`_
+* `Extending Secure Encrypted Virtualization With SEV-ES (2018)
+ <https://www.linux-kvm.org/images/9/94/Extending-Secure-Encrypted-Virtualization-with-SEV-ES-Thomas-Lendacky-AMD.pdf>`_
+
+`AMD64 Architecture Programmer's Manual:
+<http://support.amd.com/TechDocs/24593.pdf>`_
+
+* SME is section 7.10
+* SEV is section 15.34
+* SEV-ES is section 15.35
@@ -34,3 +34,4 @@ or Hypervisor.Framework.
targets
security
multi-process
+ confidential-guest-support
@@ -224,6 +224,8 @@ nested. Combinations not shown in the table are not available.
.. [3] Introduced on Power10 machines.
+.. _power-papr-protected-execution-facility-pef:
+
POWER (PAPR) Protected Execution Facility (PEF)
-----------------------------------------------
@@ -28,6 +28,7 @@ Architectural features
i386/cpu
i386/kvm-pv
i386/sgx
+ i386/amd-memory-encryption
.. _pcsys_005freq:
@@ -408,7 +408,7 @@ M: Paolo Bonzini <pbonzini@redhat.com>
M: Marcelo Tosatti <mtosatti@redhat.com>
L: kvm@vger.kernel.org
S: Supported
-F: docs/amd-memory-encryption.txt
+F: docs/system/i386/amd-memory-encryption.rst
F: docs/system/i386/sgx.rst
F: target/i386/kvm/
F: target/i386/sev*