@@ -361,6 +361,7 @@ RISC-V OpenSBI domain support
M: Gregor Haas <gregorhaas1997@gmail.com>
L: qemu-riscv@nongnu.org
S: Maintained
+F: docs/system/riscv/opensbi_domains.rst
F: hw/riscv/opensbi_domain.c
F: include/hw/riscv/opensbi_domain.h
new file mode 100644
@@ -0,0 +1,156 @@
+OpenSBI Domains
+===============
+
+OpenSBI has support for domains, which are partitions of CPUs and memory into
+isolated compartments. Domains can be specified in the device tree according to
+a standardized format [1_], which OpenSBI parses at boot time to initialize all
+system domains. Depending on the specific QEMU machine being used, these domain
+configurations can be specified on the QEMU command line. Currently, this is
+only possible for the ``virt`` machine. To enable this functionality for a new
+machine, the initialization code must call ``create_fdt_opensbi_domains`` after
+all device tree nodes for peripherals have been initialized. This is to ensure
+that references to devices work for MMIO regions.
+
+There are two "devices" that are used to configure OpenSBI domains with this
+mechanism: ``opensbi-memregion`` and ``opensbi-domain``.
+
+Memregions
+----------
+
+OpenSBI memregions can be added to the machine's device tree with the following
+flag:
+
+.. code-block:: bash
+
+ -device opensbi-memregion
+
+For this device flag, the following options are implemented:
+
+- ``id``: The name of the memregion. This name is later used to link this
+ region to a domain if desired, in which case this argument is required.
+- ``base`` (required): The base address of this memregion. This address must
+ be aligned to ``2 ^ order``.
+- ``order`` (required): The ``log2`` of the memregion's size, which must be
+ between 3 and ``__riscv_xlen`` inclusive.
+- ``mmio`` (optional): A boolean indicating whether the specified physical
+ address range belongs to an MMIO-mapped peripheral device.
+- ``deviceX`` (optional): If ``mmio`` is indicated, this is the device tree
+ path to the ``X``-th device corresponding to this physical address range,
+ where ``0 <= X < OPENSBI_MEMREGION_DEVICES_MAX`` (default 16).
+
+Domains
+-------
+
+OpenSBI domains can be added to the machine's device tree with the following
+flag:
+
+.. code-block:: bash
+
+ - device opensbi-domain
+
+For this device flag, the following options are implemented:
+
+- ``id`` (required): The name of the domain, which becomes its identifier in
+ the device tree
+- ``boot-hart`` (optional): The HART booting the domain instance.
+- ``possible-harts`` (optional): The contiguous list of CPUs for the domain
+ instance, specified as ``firstcpu[-lastcpu]`` (e.g. ``0-3``).
+- ``next-arg1`` (optional): The 64 bit next booting stage arg1 for the domain
+ instance.
+- ``next-addr`` (optional): The 64 bit next booting stage address for the
+ domain instance.
+- ``next-mode`` (optional): The 32 bit next booting stage mode for the domain
+ instance.
+- ``system-reset-allowed`` (optional): Whether the domain instance is allowed
+ to do system reset.
+- ``system-suspend-allowed`` (optional): Whether the domain instance is allowed
+ to do system suspend.
+
+Furthermore, memregions can be linked to domains using the following options:
+
+- ``regionX`` (optional): The ``id`` of the ``X``-th region for this domain,
+ where ``0 <= X < OPENSBI_DOMAIN_MEMREGIONS_MAX`` (default 16).
+- ``permsX`` (optional): Access permissions for the ``X``-th region for this
+ domain, ``0 <= X < OPENSBI_DOMAIN_MEMREGIONS_MAX`` (default 16). This must be
+ encoded using OpenSBI's permission encoding scheme in ``sbi_domain.h``, and
+ copied below at the time of writing for convenience
+
+.. code-block:: c
+
+ /** Flags representing memory region attributes */
+ #define SBI_MEMREGION_M_READABLE (1UL << 0)
+ #define SBI_MEMREGION_M_WRITABLE (1UL << 1)
+ #define SBI_MEMREGION_M_EXECUTABLE (1UL << 2)
+ #define SBI_MEMREGION_SU_READABLE (1UL << 3)
+ #define SBI_MEMREGION_SU_WRITABLE (1UL << 4)
+ #define SBI_MEMREGION_SU_EXECUTABLE (1UL << 5)
+
+Example
+-------
+
+A complete example command line is shown below:
+
+.. code-block:: bash
+
+ $ qemu-system-riscv64 -machine virt -bios fw_jump.bin -cpu max -smp 2 -m 4G -nographic \
+ -device opensbi-memregion,id=mem,base=0xBC000000,order=26,mmio=false \
+ -device opensbi-memregion,id=uart,base=0x10000000,order=12,mmio=true,device0="/soc/serial@10000000" \
+ -device opensbi-domain,id=domain,possible-harts=0-1,boot-hart=0x0,next-addr=0xBC000000,next-mode=1,region0=mem,perms0=0x3f,region1=uart,perms1=0x3f
+
+As a result of the above configuration, QEMU will add the following subnodes to
+the device tree:
+
+.. code-block:: dts
+
+ chosen {
+ opensbi-domains {
+ compatible = "opensbi,domain,config";
+
+ domain {
+ next-mode = <0x01>;
+ next-addr = <0x00 0xbc000000>;
+ boot-hart = <0x03>;
+ regions = <0x8000 0x3f 0x8002 0x3f>;
+ possible-harts = <0x03 0x01>;
+ phandle = <0x8003>;
+ compatible = "opensbi,domain,instance";
+ };
+
+ uart {
+ phandle = <0x8002>;
+ devices = <0x1800000>;
+ mmio;
+ order = <0x0c>;
+ base = <0x00 0x10000000>;
+ compatible = "opensbi,domain,memregion";
+ };
+
+ mem {
+ phandle = <0x8000>;
+ order = <0x1a>;
+ base = <0x00 0xbc000000>;
+ compatible = "opensbi,domain,memregion";
+ };
+ };
+ };
+
+This results in OpenSBI output as below, where regions 01-03 are inherited from
+the root domain and regions 00 and 04 correspond to the user specified ones:
+
+.. code-block:: console
+
+ Domain1 Name : domain
+ Domain1 Boot HART : 0
+ Domain1 HARTs : 0,1
+ Domain1 Region00 : 0x0000000010000000-0x0000000010000fff M: (I,R,W,X) S/U: (R,W,X)
+ Domain1 Region01 : 0x0000000002000000-0x000000000200ffff M: (I,R,W) S/U: ()
+ Domain1 Region02 : 0x0000000080080000-0x000000008009ffff M: (R,W) S/U: ()
+ Domain1 Region03 : 0x0000000080000000-0x000000008007ffff M: (R,X) S/U: ()
+ Domain1 Region04 : 0x00000000bc000000-0x00000000bfffffff M: (R,W,X) S/U: (R,W,X)
+ Domain1 Next Address : 0x00000000bc000000
+ Domain1 Next Arg1 : 0x0000000000000000
+ Domain1 Next Mode : S-mode
+ Domain1 SysReset : no
+ Domain1 SysSuspend : no
+
+.. _1: https://github.com/riscv-software-src/opensbi/blob/master/docs/domain_support.md
@@ -92,3 +92,13 @@ the images they need.
* ``-bios <file>``
Tells QEMU to load the specified file as the firmware.
+
+RISC-V Devices
+--------------
+
+There are some RISC-V specific devices that can be specified:
+
+.. toctree::
+ :maxdepth: 1
+
+ riscv/opensbi_domains
Signed-off-by: Gregor Haas <gregorhaas1997@gmail.com> --- MAINTAINERS | 1 + docs/system/riscv/opensbi_domains.rst | 156 ++++++++++++++++++++++++++ docs/system/target-riscv.rst | 10 ++ 3 files changed, 167 insertions(+) create mode 100644 docs/system/riscv/opensbi_domains.rst