From patchwork Mon Jan 22 21:02:02 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?In=C3=A8s_Varhol?= X-Patchwork-Id: 1889392 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=telecom-paris.fr header.i=@telecom-paris.fr header.a=rsa-sha256 header.s=A35C7578-1106-11E5-A17F-C303FDDA8F2E header.b=O09hldhA; dkim-atps=neutral Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=nongnu.org (client-ip=209.51.188.17; helo=lists.gnu.org; envelope-from=qemu-devel-bounces+incoming=patchwork.ozlabs.org@nongnu.org; receiver=patchwork.ozlabs.org) Received: from lists.gnu.org (lists.gnu.org [209.51.188.17]) (using TLSv1.2 with cipher ECDHE-ECDSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by legolas.ozlabs.org (Postfix) with ESMTPS id 4TJjY32DPlz23dq for ; Tue, 23 Jan 2024 08:10:15 +1100 (AEDT) Received: from localhost ([::1] helo=lists1p.gnu.org) by lists.gnu.org with esmtp (Exim 4.90_1) (envelope-from ) id 1rS1Xd-0000ZE-FB; Mon, 22 Jan 2024 16:09:13 -0500 Received: from eggs.gnu.org ([2001:470:142:3::10]) by lists.gnu.org with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.90_1) (envelope-from ) id 1rS1XD-0000PY-8s; Mon, 22 Jan 2024 16:08:47 -0500 Received: from zproxy4.enst.fr ([137.194.2.223]) by eggs.gnu.org with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.90_1) (envelope-from ) id 1rS1X9-00012e-Fs; Mon, 22 Jan 2024 16:08:46 -0500 Received: from localhost (localhost [IPv6:::1]) by zproxy4.enst.fr (Postfix) with ESMTP id 16E0F20639; Mon, 22 Jan 2024 22:08:41 +0100 (CET) Received: from zproxy4.enst.fr ([IPv6:::1]) by localhost (zproxy4.enst.fr [IPv6:::1]) (amavis, port 10032) with ESMTP id 6EpNqMahF1zG; Mon, 22 Jan 2024 22:08:39 +0100 (CET) Received: from localhost (localhost [IPv6:::1]) by zproxy4.enst.fr (Postfix) with ESMTP id 6DC87205EF; Mon, 22 Jan 2024 22:08:39 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.10.3 zproxy4.enst.fr 6DC87205EF DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=telecom-paris.fr; s=A35C7578-1106-11E5-A17F-C303FDDA8F2E; t=1705957719; bh=wfg5tczoG1RdIgE6unHySFIJoiGMB8hSgOnq2WZBPw8=; h=From:To:Date:Message-ID:MIME-Version; b=O09hldhA4nLKUsPsMa/2NrtrLvhn3+S6wC2l5WjGxeREubyBCiVgbbriZLi5R2pTX Eg9JZtgQvR7nBjP+lh1nTtdNbkhu4zkS57eEAi44lXSO/MKubvahb20tKPr2RVDNQW rDCBdKaFTgV0kq+WQ39hfiOCbqr+Qaes8n3MXPvM= X-Virus-Scanned: amavis at enst.fr Received: from zproxy4.enst.fr ([IPv6:::1]) by localhost (zproxy4.enst.fr [IPv6:::1]) (amavis, port 10026) with ESMTP id Fxurp4sytNEE; Mon, 22 Jan 2024 22:08:39 +0100 (CET) Received: from localhost.localdomain (74.0.125.80.rev.sfr.net [80.125.0.74]) by zproxy4.enst.fr (Postfix) with ESMTPSA id A5F05205B9; Mon, 22 Jan 2024 22:08:38 +0100 (CET) From: =?utf-8?q?In=C3=A8s_Varhol?= To: qemu-devel@nongnu.org Cc: Alistair Francis , Paolo Bonzini , qemu-arm@nongnu.org, Arnaud Minier , Peter Maydell , Thomas Huth , Laurent Vivier , Samuel Tardieu , =?utf-8?q?Philippe_Mathie?= =?utf-8?q?u-Daud=C3=A9?= , =?utf-8?q?In=C3=A8s_Varhol?= Subject: [PATCH v2 1/3] hw/gpio: Implement STM32L4x5 GPIO Date: Mon, 22 Jan 2024 22:02:02 +0100 Message-ID: <20240122210829.127691-2-ines.varhol@telecom-paris.fr> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20240122210829.127691-1-ines.varhol@telecom-paris.fr> References: <20240122210829.127691-1-ines.varhol@telecom-paris.fr> MIME-Version: 1.0 Received-SPF: pass client-ip=137.194.2.223; envelope-from=ines.varhol@telecom-paris.fr; helo=zproxy4.enst.fr X-Spam_score_int: -20 X-Spam_score: -2.1 X-Spam_bar: -- X-Spam_report: (-2.1 / 5.0 requ) BAYES_00=-1.9, DKIM_SIGNED=0.1, DKIM_VALID=-0.1, DKIM_VALID_AU=-0.1, DKIM_VALID_EF=-0.1, SPF_HELO_NONE=0.001, SPF_PASS=-0.001, T_SCC_BODY_TEXT_LINE=-0.01, WEIRD_QUOTING=0.001 autolearn=ham autolearn_force=no X-Spam_action: no action X-BeenThere: qemu-devel@nongnu.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: qemu-devel-bounces+incoming=patchwork.ozlabs.org@nongnu.org Sender: qemu-devel-bounces+incoming=patchwork.ozlabs.org@nongnu.org Features supported : - the 8 STM32L4x5 GPIOs are initialized with their reset values (except IDR, see below) - input mode : setting a pin in input mode "externally" (using input irqs) results in an out irq (transmitted to SYSCFG) - output mode : setting a bit in ODR sets the corresponding out irq (if this line is configured in output mode) - pull-up, pull-down - push-pull, open-drain Difference with the real GPIOs : - Alternate Function and Analog mode aren't implemented : pins in AF/Analog behave like pins in input mode - floating pins stay at their last value - register IDR reset values differ from the real one : values are coherent with the other registers reset values and the fact that AF/Analog modes aren't implemented - setting I/O output speed isn't supported - locking port bits isn't supported - ADC function isn't supported - GPIOH has 16 pins instead of 2 pins - writing to registers LCKR, AFRL, AFRH and ASCR is ineffective Signed-off-by: Arnaud Minier Signed-off-by: Inès Varhol --- MAINTAINERS | 1 + docs/system/arm/b-l475e-iot01a.rst | 2 +- hw/gpio/Kconfig | 3 + hw/gpio/meson.build | 1 + hw/gpio/stm32l4x5_gpio.c | 447 +++++++++++++++++++++++++++++ hw/gpio/trace-events | 6 + include/hw/gpio/stm32l4x5_gpio.h | 65 +++++ 7 files changed, 524 insertions(+), 1 deletion(-) create mode 100644 hw/gpio/stm32l4x5_gpio.c create mode 100644 include/hw/gpio/stm32l4x5_gpio.h diff --git a/MAINTAINERS b/MAINTAINERS index c4085c32a7..269ed96052 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1131,6 +1131,7 @@ F: hw/arm/stm32l4x5_soc.c F: hw/misc/stm32l4x5_exti.c F: hw/misc/stm32l4x5_syscfg.c F: hw/misc/stm32l4x5_rcc.c +F: hw/gpio/stm32l4x5_gpio.c F: include/hw/*/stm32l4x5_*.h B-L475E-IOT01A IoT Node diff --git a/docs/system/arm/b-l475e-iot01a.rst b/docs/system/arm/b-l475e-iot01a.rst index b857a56ca4..0afef8e4f4 100644 --- a/docs/system/arm/b-l475e-iot01a.rst +++ b/docs/system/arm/b-l475e-iot01a.rst @@ -18,6 +18,7 @@ Currently B-L475E-IOT01A machine's only supports the following devices: - STM32L4x5 EXTI (Extended interrupts and events controller) - STM32L4x5 SYSCFG (System configuration controller) - STM32L4x5 RCC (Reset and clock control) +- STM32L4x5 GPIOs (General-purpose I/Os) Missing devices """"""""""""""" @@ -25,7 +26,6 @@ Missing devices The B-L475E-IOT01A does *not* support the following devices: - Serial ports (UART) -- General-purpose I/Os (GPIO) - Analog to Digital Converter (ADC) - SPI controller - Timer controller (TIMER) diff --git a/hw/gpio/Kconfig b/hw/gpio/Kconfig index d2cf3accc8..712940b8e0 100644 --- a/hw/gpio/Kconfig +++ b/hw/gpio/Kconfig @@ -16,3 +16,6 @@ config GPIO_PWR config SIFIVE_GPIO bool + +config STM32L4X5_GPIO + bool diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index 066ea96480..8470ca1639 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -9,6 +9,7 @@ system_ss.add(when: 'CONFIG_IMX', if_true: files('imx_gpio.c')) system_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_gpio.c')) system_ss.add(when: 'CONFIG_NRF51_SOC', if_true: files('nrf51_gpio.c')) system_ss.add(when: 'CONFIG_OMAP', if_true: files('omap_gpio.c')) +system_ss.add(when: 'CONFIG_STM32L4X5_SOC', if_true: files('stm32l4x5_gpio.c')) system_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_gpio.c')) system_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_gpio.c')) system_ss.add(when: 'CONFIG_SIFIVE_GPIO', if_true: files('sifive_gpio.c')) diff --git a/hw/gpio/stm32l4x5_gpio.c b/hw/gpio/stm32l4x5_gpio.c new file mode 100644 index 0000000000..58b321a299 --- /dev/null +++ b/hw/gpio/stm32l4x5_gpio.c @@ -0,0 +1,447 @@ +/* + * STM32L4x5 GPIO (General Purpose Input/Ouput) + * + * Copyright (c) 2023 Arnaud Minier + * Copyright (c) 2023 Inès Varhol + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +/* + * The reference used is the STMicroElectronics RM0351 Reference manual + * for STM32L4x5 and STM32L4x6 advanced Arm ® -based 32-bit MCUs. + * https://www.st.com/en/microcontrollers-microprocessors/stm32l4x5/documentation.html + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "hw/gpio/stm32l4x5_gpio.h" +#include "hw/irq.h" +#include "hw/qdev-clock.h" +#include "hw/qdev-properties.h" +#include "qapi/visitor.h" +#include "qapi/error.h" +#include "migration/vmstate.h" +#include "trace.h" + +#define GPIO_MODER 0x00 +#define GPIO_OTYPER 0x04 +#define GPIO_OSPEEDR 0x08 +#define GPIO_PUPDR 0x0C +#define GPIO_IDR 0x10 +#define GPIO_ODR 0x14 +#define GPIO_BSRR 0x18 +#define GPIO_LCKR 0x1C +#define GPIO_AFRL 0x20 +#define GPIO_AFRH 0x24 +#define GPIO_BRR 0x28 +#define GPIO_ASCR 0x2C + +/* 0b11111111_11111111_00000000_00000000 */ +#define RESERVED_BITS_MASK 0xFFFF0000 + +static void update_gpio_idr(Stm32l4x5GpioState *s); +static void disconnected_pins_set(Object *obj, Visitor *v, + const char *name, void *opaque, Error **errp); +static void disconnected_pins_get(Object *obj, Visitor *v, + const char *name, void *opaque, Error **errp); + +static void stm32l4x5_gpio_reset_hold(Object *obj) +{ + Stm32l4x5GpioState *s = STM32L4X5_GPIO(obj); + + s->otyper = 0x00000000; + s->idr = 0x00000000; + s->odr = 0x00000000; + s->lckr = 0x00000000; + s->afrl = 0x00000000; + s->afrh = 0x00000000; + s->ascr = 0x00000000; + /* moder, ospeedr and pupdr are initialized using properties */ + + s->disconnected_pins = 0xFFFF; + object_property_add(obj, "disconnected-pins", "uint16", + disconnected_pins_get, disconnected_pins_set, NULL, + &s->disconnected_pins); + s->pins_connected_high = 0x0000; + update_gpio_idr(s); +} + +static void stm32l4x5_gpio_set(void *opaque, int line, int level) +{ + Stm32l4x5GpioState *s = opaque; + /* + * The pin isn't set if line is configured in output mode + * except if level is 0 and the output is open-drain. + * This way there will be no short-circuit prone situations. + */ + if ((extract32(s->moder, 2 * line, 2) == 1) && + !((extract32(s->otyper, line, 1) == 1) && + (level == 0))) { + qemu_log_mask(LOG_GUEST_ERROR, "Line %d can't be driven externally\n", + line); + return; + } + + s->disconnected_pins &= ~(1 << line); + if (level) { + s->pins_connected_high |= (1 << line); + } else { + s->pins_connected_high &= ~(1 << line); + } + trace_stm32l4x5_gpio_pins(s->name, s->disconnected_pins, + s->pins_connected_high); + update_gpio_idr(s); +} + + +static void update_gpio_idr(Stm32l4x5GpioState *s) +{ + uint32_t new_idr_mask = 0; + uint32_t new_idr = s->odr; + + for (int i = 0; i < 16; i++) { + /* output mode */ + if (extract32(s->moder, 2 * i, 2) == 1) { + if (extract32(s->otyper, i, 1) == 0) { + /* push-pull */ + new_idr_mask |= (1 << i); + } else if (!(s->odr & (1 << i))) { + /* open-drain ODR 0 */ + new_idr_mask |= (1 << i); + } else if ((s->disconnected_pins & (1 << i)) && + (extract32(s->pupdr, 2 * i, 2) == 1)) { + /* open-drain pull-up ODR 1 with disconnected pin */ + new_idr_mask |= (1 << i); + } else if ((s->disconnected_pins & (1 << i)) && + (extract32(s->pupdr, 2 * i, 2) == 2)) { + /* open-drain pull-down ODR 1 with disconnected pin */ + new_idr_mask |= (1 << i); + new_idr &= ~(1 << i); + } else if (!(s->pins_connected_high & (1 << i))) { + /* open-drain ODR 1 with pin connected low */ + new_idr_mask |= (1 << i); + new_idr &= ~(1 << i); + } + /* + * The only case left is for open-drain ODR 1 + * with disconnected pin without pull-up or pull-down : + * the value is floating. + */ + /* input or analog mode with connected pin */ + } else if (!(s->disconnected_pins & (1 << i))) { + if (s->pins_connected_high & (1 << i)) { + /* pin high */ + new_idr_mask |= (1 << i); + new_idr |= (1 << i); + } else { + /* pin low */ + new_idr_mask |= (1 << i); + new_idr &= ~(1 << i); + } + /* input or analog mode with disconnected pin */ + } else { + if (extract32(s->pupdr, 2 * i, 2) == 1) { + /* pull-up */ + new_idr_mask |= (1 << i); + new_idr |= (1 << i); + } else if (extract32(s->pupdr, 2 * i, 2) == 2) { + /* pull-down */ + new_idr_mask |= (1 << i); + new_idr &= ~(1 << i); + } + /* + * The only case left is for a disconnected pin + * without pull-up or pull-down : + * the value is floating. + */ + } + } + + uint32_t old_idr = s->idr; + s->idr = (old_idr & ~new_idr_mask) | (new_idr & new_idr_mask); + trace_stm32l4x5_gpio_update_idr(s->name, old_idr, s->idr); + + for (int i = 0; i < 16; i++) { + if (new_idr_mask & (1 << i)) { + if ((new_idr & (1 << i)) > (old_idr & (1 << i))) { + qemu_irq_raise(s->pin[i]); + } else if ((new_idr & (1 << i)) < (old_idr & (1 << i))) { + qemu_irq_lower(s->pin[i]); + } + } + } +} + +/* + * Return pins both configured in output mode + * and externally driven (except pins in open-drain + * mode externally set to 0). + */ +static uint32_t get_gpio_pins_to_disconnect(Stm32l4x5GpioState *s) +{ + uint32_t pins_to_disconnect = 0; + for (int i = 0; i < 16; i++) { + /* for each connected pin in output mode */ + if ((~s->disconnected_pins & (1 << i)) && + (extract32(s->moder, 2 * i, 2) == 1)) { + /* if either push-pull or high level */ + if ((extract32(s->otyper, i, 1) == 0) || + (extract16(s->pins_connected_high, i, 1)) == 1) { + pins_to_disconnect |= (1 << i); + qemu_log_mask(LOG_GUEST_ERROR, + "Line %d can't be driven externally\n", + i); + } + } + } + return pins_to_disconnect; +} + +/* + * Set field `disconnected_pins` and call `update_gpio_idr()` + */ +static void disconnect_gpio_pins(Stm32l4x5GpioState *s, uint16_t lines) +{ + s->disconnected_pins |= lines; + trace_stm32l4x5_gpio_pins(s->name, s->disconnected_pins, + s->pins_connected_high); + update_gpio_idr(s); +} + +static void disconnected_pins_set(Object *obj, Visitor *v, + const char *name, void *opaque, Error **errp) +{ + Stm32l4x5GpioState *s = STM32L4X5_GPIO(obj); + uint16_t value; + if (!visit_type_uint16(v, name, &value, errp)) { + return; + } + disconnect_gpio_pins(s, value); +} + +static void disconnected_pins_get(Object *obj, Visitor *v, + const char *name, void *opaque, Error **errp) +{ + visit_type_uint16(v, name, (uint16_t *)opaque, errp); +} + +static void stm32l4x5_gpio_write(void *opaque, hwaddr addr, + uint64_t val64, unsigned int size) +{ + Stm32l4x5GpioState *s = opaque; + + uint32_t value = val64; + trace_stm32l4x5_gpio_write(s->name, addr, val64); + + switch (addr) { + case GPIO_MODER: + s->moder = value; + disconnect_gpio_pins(s, get_gpio_pins_to_disconnect(s)); + qemu_log_mask(LOG_UNIMP, + "%s: Analog and AF modes aren't supported\n\ + Analog and AF mode behave like input mode\n", + __func__); + return; + case GPIO_OTYPER: + s->otyper = value & ~RESERVED_BITS_MASK; + disconnect_gpio_pins(s, get_gpio_pins_to_disconnect(s)); + return; + case GPIO_OSPEEDR: + qemu_log_mask(LOG_UNIMP, + "%s: Changing I/O output speed isn't supported\n\ + I/O speed is already maximal\n", + __func__); + s->ospeedr = value; + return; + case GPIO_PUPDR: + s->pupdr = value; + update_gpio_idr(s); + return; + case GPIO_IDR: + qemu_log_mask(LOG_UNIMP, + "%s: GPIO->IDR is read-only\n", + __func__); + return; + case GPIO_ODR: + s->odr = value & ~RESERVED_BITS_MASK; + update_gpio_idr(s); + return; + case GPIO_BSRR: { + uint32_t bits_to_reset = (value & RESERVED_BITS_MASK) >> 16; + uint32_t bits_to_set = value & ~RESERVED_BITS_MASK; + /* If both BSx and BRx are set, BSx has priority.*/ + s->odr &= ~bits_to_reset; + s->odr |= bits_to_set; + update_gpio_idr(s); + return; + } + case GPIO_LCKR: + qemu_log_mask(LOG_UNIMP, + "%s: Locking port bits configuration isn't supported\n", + __func__); + s->lckr = value & ~RESERVED_BITS_MASK; + return; + case GPIO_AFRL: + qemu_log_mask(LOG_UNIMP, + "%s: Alternate functions aren't supported\n", + __func__); + s->afrl = value; + return; + case GPIO_AFRH: + qemu_log_mask(LOG_UNIMP, + "%s: Alternate functions aren't supported\n", + __func__); + s->afrh = value; + return; + case GPIO_BRR: { + uint32_t bits_to_reset = value & ~RESERVED_BITS_MASK; + s->odr &= ~bits_to_reset; + update_gpio_idr(s); + return; + } + case GPIO_ASCR: + qemu_log_mask(LOG_UNIMP, + "%s: ADC function isn't supported\n", + __func__); + s->ascr = value & ~RESERVED_BITS_MASK; + return; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, addr); + } +} + +static uint64_t stm32l4x5_gpio_read(void *opaque, hwaddr addr, + unsigned int size) +{ + Stm32l4x5GpioState *s = opaque; + + trace_stm32l4x5_gpio_read(s->name, addr); + + switch (addr) { + case GPIO_MODER: + return s->moder; + case GPIO_OTYPER: + return s->otyper; + case GPIO_OSPEEDR: + return s->ospeedr; + case GPIO_PUPDR: + return s->pupdr; + case GPIO_IDR: + return s->idr; + case GPIO_ODR: + return s->odr; + case GPIO_BSRR: + return 0; + case GPIO_LCKR: + return s->lckr; + case GPIO_AFRL: + return s->afrl; + case GPIO_AFRH: + return s->afrh; + case GPIO_BRR: + return 0; + case GPIO_ASCR: + return s->ascr; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, addr); + return 0; + } +} + +static const MemoryRegionOps stm32l4x5_gpio_ops = { + .read = stm32l4x5_gpio_read, + .write = stm32l4x5_gpio_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .impl = { + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void stm32l4x5_gpio_init(Object *obj) +{ + Stm32l4x5GpioState *s = STM32L4X5_GPIO(obj); + + memory_region_init_io(&s->mmio, obj, &stm32l4x5_gpio_ops, s, + TYPE_STM32L4X5_GPIO, 0x400); + + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio); + + qdev_init_gpio_out(DEVICE(obj), s->pin, GPIO_NUM_PINS); + qdev_init_gpio_in(DEVICE(obj), stm32l4x5_gpio_set, GPIO_NUM_PINS); + + s->clk = qdev_init_clock_in(DEVICE(s), "clk", NULL, s, 0); +} + +static void stm32l4x5_gpio_realize(DeviceState *dev, Error **errp) +{ + Stm32l4x5GpioState *s = STM32L4X5_GPIO(dev); + if (!clock_has_source(s->clk)) { + error_setg(errp, "GPIO: clk input must be connected"); + return; + } +} + +static const VMStateDescription vmstate_stm32l4x5_gpio = { + .name = TYPE_STM32L4X5_GPIO, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]){ + VMSTATE_UINT32(moder, Stm32l4x5GpioState), + VMSTATE_UINT32(otyper, Stm32l4x5GpioState), + VMSTATE_UINT32(ospeedr, Stm32l4x5GpioState), + VMSTATE_UINT32(pupdr, Stm32l4x5GpioState), + VMSTATE_UINT32(idr, Stm32l4x5GpioState), + VMSTATE_UINT32(odr, Stm32l4x5GpioState), + VMSTATE_UINT32(lckr, Stm32l4x5GpioState), + VMSTATE_UINT32(afrl, Stm32l4x5GpioState), + VMSTATE_UINT32(afrh, Stm32l4x5GpioState), + VMSTATE_UINT32(ascr, Stm32l4x5GpioState), + VMSTATE_UINT16(disconnected_pins, Stm32l4x5GpioState), + VMSTATE_UINT16(pins_connected_high, Stm32l4x5GpioState), + VMSTATE_END_OF_LIST() + } +}; + +static Property stm32l4x5_gpio_properties[] = { + DEFINE_PROP_STRING("name", Stm32l4x5GpioState, name), + DEFINE_PROP_UINT32("mode-reset", Stm32l4x5GpioState, moder, 0), + DEFINE_PROP_UINT32("ospeed-reset", Stm32l4x5GpioState, ospeedr, 0), + DEFINE_PROP_UINT32("pupd-reset", Stm32l4x5GpioState, pupdr, 0), + DEFINE_PROP_END_OF_LIST(), +}; + +static void stm32l4x5_gpio_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + device_class_set_props(dc, stm32l4x5_gpio_properties); + dc->vmsd = &vmstate_stm32l4x5_gpio; + dc->realize = stm32l4x5_gpio_realize; + rc->phases.hold = stm32l4x5_gpio_reset_hold; +} + +static const TypeInfo stm32l4x5_gpio_types[] = { + { + .name = TYPE_STM32L4X5_GPIO, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(Stm32l4x5GpioState), + .instance_init = stm32l4x5_gpio_init, + .class_init = stm32l4x5_gpio_class_init, + }, +}; + +DEFINE_TYPES(stm32l4x5_gpio_types) diff --git a/hw/gpio/trace-events b/hw/gpio/trace-events index 9736b362ac..9331f4289d 100644 --- a/hw/gpio/trace-events +++ b/hw/gpio/trace-events @@ -31,3 +31,9 @@ sifive_gpio_update_output_irq(int64_t line, int64_t value) "line %" PRIi64 " val # aspeed_gpio.c aspeed_gpio_read(uint64_t offset, uint64_t value) "offset: 0x%" PRIx64 " value 0x%" PRIx64 aspeed_gpio_write(uint64_t offset, uint64_t value) "offset: 0x%" PRIx64 " value 0x%" PRIx64 + +# stm32l4x5_gpio.c +stm32l4x5_gpio_read(char *gpio, uint64_t addr) "GPIO%s addr: 0x%" PRIx64 " " +stm32l4x5_gpio_write(char *gpio, uint64_t addr, uint64_t data) "GPIO%s addr: 0x%" PRIx64 " val: 0x%" PRIx64 "" +stm32l4x5_gpio_update_idr(char *gpio, uint32_t old_idr, uint32_t new_idr) "GPIO%s from: 0x%x to: 0x%x" +stm32l4x5_gpio_pins(char *gpio, uint16_t disconnected, uint16_t high) "GPIO%s disconnected pins: 0x%x levels: 0x%x" diff --git a/include/hw/gpio/stm32l4x5_gpio.h b/include/hw/gpio/stm32l4x5_gpio.h new file mode 100644 index 0000000000..fc2f0d55eb --- /dev/null +++ b/include/hw/gpio/stm32l4x5_gpio.h @@ -0,0 +1,65 @@ +/* + * STM32L4x5 GPIO (General Purpose Input/Ouput) + * + * Copyright (c) 2023 Arnaud Minier + * Copyright (c) 2023 Inès Varhol + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +/* + * The reference used is the STMicroElectronics RM0351 Reference manual + * for STM32L4x5 and STM32L4x6 advanced Arm ® -based 32-bit MCUs. + * https://www.st.com/en/microcontrollers-microprocessors/stm32l4x5/documentation.html + */ + +#ifndef HW_STM32L4X5_GPIO_H +#define HW_STM32L4X5_GPIO_H + +#include "hw/sysbus.h" +#include "qom/object.h" + +#define TYPE_STM32L4X5_GPIO "stm32l4x5-gpio" +OBJECT_DECLARE_SIMPLE_TYPE(Stm32l4x5GpioState, STM32L4X5_GPIO) + +#define GPIO_NUM_PINS 16 + +struct Stm32l4x5GpioState { + SysBusDevice parent_obj; + + MemoryRegion mmio; + + /* GPIO registers */ + uint32_t moder; + uint32_t otyper; + uint32_t ospeedr; + uint32_t pupdr; + uint32_t idr; + uint32_t odr; + uint32_t lckr; + uint32_t afrl; + uint32_t afrh; + uint32_t ascr; + + /* + * External driving of pins. + * The pins can be set externally through the device + * anonymous input GPIOs lines under certain conditions. + * The pin must not be in push-pull output mode, + * and can't be set high in open-drain mode. + * Pins driven externally and configured to + * output mode will in general be "disconnected" + * (see `get_gpio_pins_to_disconnect()`) + */ + uint16_t disconnected_pins; + uint16_t pins_connected_high; + + char *name; + Clock *clk; + qemu_irq pin[GPIO_NUM_PINS]; +}; + +#endif