From patchwork Tue Jan 9 15:21:39 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?In=C3=A8s_Varhol?= X-Patchwork-Id: 1884506 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=telecom-paris.fr header.i=@telecom-paris.fr header.a=rsa-sha256 header.s=A35C7578-1106-11E5-A17F-C303FDDA8F2E header.b=9Fg/YLoC; dkim-atps=neutral Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=nongnu.org (client-ip=209.51.188.17; helo=lists.gnu.org; envelope-from=qemu-devel-bounces+incoming=patchwork.ozlabs.org@nongnu.org; receiver=patchwork.ozlabs.org) Received: from lists.gnu.org (lists.gnu.org [209.51.188.17]) (using TLSv1.2 with cipher ECDHE-ECDSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by legolas.ozlabs.org (Postfix) with ESMTPS id 4T8ZWw0H8xz1yPh for ; Wed, 10 Jan 2024 02:26:02 +1100 (AEDT) Received: from localhost ([::1] helo=lists1p.gnu.org) by lists.gnu.org with esmtp (Exim 4.90_1) (envelope-from ) id 1rNDxm-0006DU-Cw; Tue, 09 Jan 2024 10:24:22 -0500 Received: from eggs.gnu.org ([2001:470:142:3::10]) by lists.gnu.org with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.90_1) (envelope-from ) id 1rNDxg-0006Bo-7n; Tue, 09 Jan 2024 10:24:16 -0500 Received: from zproxy3.enst.fr ([137.194.2.222]) by eggs.gnu.org with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.90_1) (envelope-from ) id 1rNDxY-0001Eg-7o; Tue, 09 Jan 2024 10:24:15 -0500 Received: from localhost (localhost [IPv6:::1]) by zproxy3.enst.fr (Postfix) with ESMTP id 59D7EA07E1; Tue, 9 Jan 2024 16:23:57 +0100 (CET) Received: from zproxy3.enst.fr ([IPv6:::1]) by localhost (zproxy3.enst.fr [IPv6:::1]) (amavis, port 10032) with ESMTP id 3pP3dRsJqyNp; Tue, 9 Jan 2024 16:23:56 +0100 (CET) Received: from localhost (localhost [IPv6:::1]) by zproxy3.enst.fr (Postfix) with ESMTP id BE0D8A0825; Tue, 9 Jan 2024 16:23:55 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.10.3 zproxy3.enst.fr BE0D8A0825 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=telecom-paris.fr; s=A35C7578-1106-11E5-A17F-C303FDDA8F2E; t=1704813835; bh=5HCkj3OWCmvU/py18FZKwwDrXjZUZ74hhehr6xKURoU=; h=From:To:Date:Message-ID:MIME-Version; b=9Fg/YLoCVQASYiQAOufwVkchYj1k0uuON/7uwJE8il0hFmGpxveOPrMNOUJYU1gRm tmpjboii9/IYvHLx8zbtigYTlTnND8S2xRAuzDEWDMAxlkBf6YGBuIegZr/81W9Xs+ JqeRdjhgrWjbYZg8jWEFw9bhe5hVsaHdfBcrpKOY= X-Virus-Scanned: amavis at enst.fr Received: from zproxy3.enst.fr ([IPv6:::1]) by localhost (zproxy3.enst.fr [IPv6:::1]) (amavis, port 10026) with ESMTP id nU0bZBi1cR8b; Tue, 9 Jan 2024 16:23:55 +0100 (CET) Received: from inesv-Inspiron-3501.enst.fr (unknown [IPv6:2a04:8ec0:0:240:3f5e:381b:bff9:b9ae]) by zproxy3.enst.fr (Postfix) with ESMTPSA id 6EDE0A0827; Tue, 9 Jan 2024 16:23:55 +0100 (CET) From: =?utf-8?q?In=C3=A8s_Varhol?= To: qemu-devel@nongnu.org Cc: Alistair Francis , =?utf-8?q?In=C3=A8s_Varhol?= , Paolo Bonzini , Thomas Huth , Samuel Tardieu , =?utf-8?q?Philippe_Mathie?= =?utf-8?q?u-Daud=C3=A9?= , Peter Maydell , qemu-arm@nongnu.org, Laurent Vivier , Arnaud Minier , Alistair Francis Subject: [PATCH v7 3/3] tests/qtest: Add STM32L4x5 EXTI QTest testcase Date: Tue, 9 Jan 2024 16:21:39 +0100 Message-ID: <20240109152350.303202-4-ines.varhol@telecom-paris.fr> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20240109152350.303202-1-ines.varhol@telecom-paris.fr> References: <20240109152350.303202-1-ines.varhol@telecom-paris.fr> MIME-Version: 1.0 Received-SPF: pass client-ip=137.194.2.222; envelope-from=ines.varhol@telecom-paris.fr; helo=zproxy3.enst.fr X-Spam_score_int: -20 X-Spam_score: -2.1 X-Spam_bar: -- X-Spam_report: (-2.1 / 5.0 requ) BAYES_00=-1.9, DKIM_SIGNED=0.1, DKIM_VALID=-0.1, DKIM_VALID_AU=-0.1, DKIM_VALID_EF=-0.1, SPF_HELO_NONE=0.001, T_SCC_BODY_TEXT_LINE=-0.01, T_SPF_TEMPERROR=0.01 autolearn=ham autolearn_force=no X-Spam_action: no action X-BeenThere: qemu-devel@nongnu.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: qemu-devel-bounces+incoming=patchwork.ozlabs.org@nongnu.org Sender: qemu-devel-bounces+incoming=patchwork.ozlabs.org@nongnu.org Reviewed-by: Philippe Mathieu-Daudé Acked-by: Alistair Francis Signed-off-by: Arnaud Minier Signed-off-by: Inès Varhol --- tests/qtest/meson.build | 5 + tests/qtest/stm32l4x5_exti-test.c | 524 ++++++++++++++++++++++++++++++ 2 files changed, 529 insertions(+) create mode 100644 tests/qtest/stm32l4x5_exti-test.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index f25bffcc20..d890b6f333 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -194,6 +194,10 @@ qtests_aspeed = \ ['aspeed_hace-test', 'aspeed_smc-test', 'aspeed_gpio-test'] + +qtests_stm32l4x5 = \ + ['stm32l4x5_exti-test'] + qtests_arm = \ (config_all_devices.has_key('CONFIG_MPS2') ? ['sse-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_DUALTIMER') ? ['cmsdk-apb-dualtimer-test'] : []) + \ @@ -207,6 +211,7 @@ qtests_arm = \ (config_all_devices.has_key('CONFIG_TPM_TIS_I2C') ? ['tpm-tis-i2c-test'] : []) + \ (config_all_devices.has_key('CONFIG_VEXPRESS') ? ['test-arm-mptimer'] : []) + \ (config_all_devices.has_key('CONFIG_MICROBIT') ? ['microbit-test'] : []) + \ + (config_all_devices.has_key('CONFIG_STM32L4X5_SOC') ? qtests_stm32l4x5 : []) + \ ['arm-cpu-features', 'boot-serial-test'] diff --git a/tests/qtest/stm32l4x5_exti-test.c b/tests/qtest/stm32l4x5_exti-test.c new file mode 100644 index 0000000000..c390077713 --- /dev/null +++ b/tests/qtest/stm32l4x5_exti-test.c @@ -0,0 +1,524 @@ +/* + * QTest testcase for STM32L4x5_EXTI + * + * Copyright (c) 2023 Arnaud Minier + * Copyright (c) 2023 Inès Varhol + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +#define EXTI_BASE_ADDR 0x40010400 +#define EXTI_IMR1 0x00 +#define EXTI_EMR1 0x04 +#define EXTI_RTSR1 0x08 +#define EXTI_FTSR1 0x0C +#define EXTI_SWIER1 0x10 +#define EXTI_PR1 0x14 +#define EXTI_IMR2 0x20 +#define EXTI_EMR2 0x24 +#define EXTI_RTSR2 0x28 +#define EXTI_FTSR2 0x2C +#define EXTI_SWIER2 0x30 +#define EXTI_PR2 0x34 + +#define NVIC_ISER 0xE000E100 +#define NVIC_ISPR 0xE000E200 +#define NVIC_ICPR 0xE000E280 + +#define EXTI0_IRQ 6 +#define EXTI1_IRQ 7 +#define EXTI35_IRQ 1 + +static void enable_nvic_irq(unsigned int n) +{ + writel(NVIC_ISER, 1 << n); +} + +static void unpend_nvic_irq(unsigned int n) +{ + writel(NVIC_ICPR, 1 << n); +} + +static bool check_nvic_pending(unsigned int n) +{ + return readl(NVIC_ISPR) & (1 << n); +} + +static void exti_writel(unsigned int offset, uint32_t value) +{ + writel(EXTI_BASE_ADDR + offset, value); +} + +static uint32_t exti_readl(unsigned int offset) +{ + return readl(EXTI_BASE_ADDR + offset); +} + +static void exti_set_irq(int num, int level) +{ + qtest_set_irq_in(global_qtest, "/machine/soc/exti", NULL, + num, level); +} + +static void test_reg_write_read(void) +{ + /* Test that non-reserved bits in xMR and xTSR can be set and cleared */ + + exti_writel(EXTI_IMR1, 0xFFFFFFFF); + g_assert_cmpuint(exti_readl(EXTI_IMR1), ==, 0xFFFFFFFF); + exti_writel(EXTI_IMR1, 0x00000000); + g_assert_cmpuint(exti_readl(EXTI_IMR1), ==, 0x00000000); + + exti_writel(EXTI_EMR1, 0xFFFFFFFF); + g_assert_cmpuint(exti_readl(EXTI_EMR1), ==, 0xFFFFFFFF); + exti_writel(EXTI_EMR1, 0x00000000); + g_assert_cmpuint(exti_readl(EXTI_EMR1), ==, 0x00000000); + + exti_writel(EXTI_RTSR1, 0xFFFFFFFF); + g_assert_cmpuint(exti_readl(EXTI_RTSR1), ==, 0x007DFFFF); + exti_writel(EXTI_RTSR1, 0x00000000); + g_assert_cmpuint(exti_readl(EXTI_RTSR1), ==, 0x00000000); + + exti_writel(EXTI_FTSR1, 0xFFFFFFFF); + g_assert_cmpuint(exti_readl(EXTI_FTSR1), ==, 0x007DFFFF); + exti_writel(EXTI_FTSR1, 0x00000000); + g_assert_cmpuint(exti_readl(EXTI_FTSR1), ==, 0x00000000); + + exti_writel(EXTI_IMR2, 0xFFFFFFFF); + g_assert_cmpuint(exti_readl(EXTI_IMR2), ==, 0x000000FF); + exti_writel(EXTI_IMR2, 0x00000000); + g_assert_cmpuint(exti_readl(EXTI_IMR2), ==, 0x00000000); + + exti_writel(EXTI_EMR2, 0xFFFFFFFF); + g_assert_cmpuint(exti_readl(EXTI_EMR2), ==, 0x000000FF); + exti_writel(EXTI_EMR2, 0x00000000); + g_assert_cmpuint(exti_readl(EXTI_EMR2), ==, 0x00000000); + + exti_writel(EXTI_RTSR2, 0xFFFFFFFF); + g_assert_cmpuint(exti_readl(EXTI_RTSR2), ==, 0x00000078); + exti_writel(EXTI_RTSR2, 0x00000000); + g_assert_cmpuint(exti_readl(EXTI_RTSR2), ==, 0x00000000); + + exti_writel(EXTI_FTSR2, 0xFFFFFFFF); + g_assert_cmpuint(exti_readl(EXTI_FTSR2), ==, 0x00000078); + exti_writel(EXTI_FTSR2, 0x00000000); + g_assert_cmpuint(exti_readl(EXTI_FTSR2), ==, 0x00000000); +} + +static void test_direct_lines_write(void) +{ + /* Test that direct lines reserved bits are not written to */ + + exti_writel(EXTI_RTSR1, 0xFF820000); + g_assert_cmpuint(exti_readl(EXTI_RTSR1), ==, 0x00000000); + + exti_writel(EXTI_FTSR1, 0xFF820000); + g_assert_cmpuint(exti_readl(EXTI_FTSR1), ==, 0x00000000); + + exti_writel(EXTI_SWIER1, 0xFF820000); + g_assert_cmpuint(exti_readl(EXTI_SWIER1), ==, 0x00000000); + + exti_writel(EXTI_PR1, 0xFF820000); + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000); + + exti_writel(EXTI_RTSR2, 0x00000087); + g_assert_cmpuint(exti_readl(EXTI_RTSR2), ==, 0x00000000); + + exti_writel(EXTI_FTSR2, 0x00000087); + g_assert_cmpuint(exti_readl(EXTI_FTSR2), ==, 0x00000000); + + exti_writel(EXTI_SWIER2, 0x00000087); + g_assert_cmpuint(exti_readl(EXTI_SWIER2), ==, 0x00000000); + + exti_writel(EXTI_PR2, 0x00000087); + g_assert_cmpuint(exti_readl(EXTI_PR2), ==, 0x00000000); +} + +static void test_reserved_bits_write(void) +{ + /* Test that reserved bits stay are not written to */ + + exti_writel(EXTI_IMR2, 0xFFFFFF00); + g_assert_cmpuint(exti_readl(EXTI_IMR2), ==, 0x00000000); + + exti_writel(EXTI_EMR2, 0xFFFFFF00); + g_assert_cmpuint(exti_readl(EXTI_EMR2), ==, 0x00000000); + + exti_writel(EXTI_RTSR2, 0xFFFFFF00); + g_assert_cmpuint(exti_readl(EXTI_RTSR2), ==, 0x00000000); + + exti_writel(EXTI_FTSR2, 0xFFFFFF00); + g_assert_cmpuint(exti_readl(EXTI_FTSR2), ==, 0x00000000); + + exti_writel(EXTI_SWIER2, 0xFFFFFF00); + g_assert_cmpuint(exti_readl(EXTI_SWIER2), ==, 0x00000000); + + exti_writel(EXTI_PR2, 0xFFFFFF00); + g_assert_cmpuint(exti_readl(EXTI_PR2), ==, 0x00000000); +} + +static void test_software_interrupt(void) +{ + /* + * Test that we can launch a software irq by : + * - enabling its line in IMR + * - and then setting a bit from '0' to '1' in SWIER + * + * And that the interruption stays pending in NVIC + * even after clearing the pending bit in PR. + */ + + /* + * Testing interrupt line EXTI0 + * Bit 0 in EXTI_*1 registers (EXTI0) corresponds to GPIO Px_0 + */ + + enable_nvic_irq(EXTI0_IRQ); + /* Check that there are no interrupts already pending in PR */ + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000); + /* Check that this specific interrupt isn't pending in NVIC */ + g_assert_false(check_nvic_pending(EXTI0_IRQ)); + + /* Enable interrupt line EXTI0 */ + exti_writel(EXTI_IMR1, 0x00000001); + /* Set the right SWIER bit from '0' to '1' */ + exti_writel(EXTI_SWIER1, 0x00000000); + exti_writel(EXTI_SWIER1, 0x00000001); + + /* Check that the write in SWIER was effective */ + g_assert_cmpuint(exti_readl(EXTI_SWIER1), ==, 0x00000001); + /* Check that the corresponding pending bit in PR is set */ + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000001); + /* Check that the corresponding interrupt is pending in the NVIC */ + g_assert_true(check_nvic_pending(EXTI0_IRQ)); + + /* Clear the pending bit in PR */ + exti_writel(EXTI_PR1, 0x00000001); + + /* Check that the write in PR was effective */ + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000); + /* Check that the corresponding bit in SWIER was cleared */ + g_assert_cmpuint(exti_readl(EXTI_SWIER1), ==, 0x00000000); + /* Check that the interrupt is still pending in the NVIC */ + g_assert_true(check_nvic_pending(EXTI0_IRQ)); + + /* + * Testing interrupt line EXTI35 + * Bit 3 in EXTI_*2 registers (EXTI35) corresponds to PVM 1 Wakeup + */ + + enable_nvic_irq(EXTI35_IRQ); + /* Check that there are no interrupts already pending */ + g_assert_cmpuint(exti_readl(EXTI_PR2), ==, 0x00000000); + g_assert_false(check_nvic_pending(EXTI35_IRQ)); + + /* Enable interrupt line EXTI0 */ + exti_writel(EXTI_IMR2, 0x00000008); + /* Set the right SWIER bit from '0' to '1' */ + exti_writel(EXTI_SWIER2, 0x00000000); + exti_writel(EXTI_SWIER2, 0x00000008); + + /* Check that the write in SWIER was effective */ + g_assert_cmpuint(exti_readl(EXTI_SWIER2), ==, 0x00000008); + /* Check that the corresponding pending bit in PR is set */ + g_assert_cmpuint(exti_readl(EXTI_PR2), ==, 0x00000008); + /* Check that the corresponding interrupt is pending in the NVIC */ + g_assert_true(check_nvic_pending(EXTI35_IRQ)); + + /* Clear the pending bit in PR */ + exti_writel(EXTI_PR2, 0x00000008); + + /* Check that the write in PR was effective */ + g_assert_cmpuint(exti_readl(EXTI_PR2), ==, 0x00000000); + /* Check that the corresponding bit in SWIER was cleared */ + g_assert_cmpuint(exti_readl(EXTI_SWIER2), ==, 0x00000000); + /* Check that the interrupt is still pending in the NVIC */ + g_assert_true(check_nvic_pending(EXTI35_IRQ)); + + /* Clean NVIC */ + unpend_nvic_irq(EXTI0_IRQ); + g_assert_false(check_nvic_pending(EXTI0_IRQ)); + unpend_nvic_irq(EXTI35_IRQ); + g_assert_false(check_nvic_pending(EXTI35_IRQ)); +} + +static void test_edge_selector(void) +{ + enable_nvic_irq(EXTI0_IRQ); + + /* Configure EXTI line 0 irq on rising edge */ + exti_set_irq(0, 1); + exti_writel(EXTI_IMR1, 0x00000001); + exti_writel(EXTI_RTSR1, 0x00000001); + exti_writel(EXTI_FTSR1, 0x00000000); + + /* Test that an irq is raised on rising edge only */ + exti_set_irq(0, 0); + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000); + g_assert_false(check_nvic_pending(EXTI0_IRQ)); + + exti_set_irq(0, 1); + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000001); + g_assert_true(check_nvic_pending(EXTI0_IRQ)); + + /* Clean the test */ + exti_writel(EXTI_PR1, 0x00000001); + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000); + unpend_nvic_irq(EXTI0_IRQ); + g_assert_false(check_nvic_pending(EXTI0_IRQ)); + + /* Configure EXTI line 0 irq on falling edge */ + exti_set_irq(0, 0); + exti_writel(EXTI_IMR1, 0x00000001); + exti_writel(EXTI_RTSR1, 0x00000000); + exti_writel(EXTI_FTSR1, 0x00000001); + + /* Test that an irq is raised on falling edge only */ + exti_set_irq(0, 1); + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000); + g_assert_false(check_nvic_pending(EXTI0_IRQ)); + + exti_set_irq(0, 0); + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000001); + g_assert_true(check_nvic_pending(EXTI0_IRQ)); + + /* Clean the test */ + exti_writel(EXTI_PR1, 0x00000001); + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000); + unpend_nvic_irq(EXTI0_IRQ); + g_assert_false(check_nvic_pending(EXTI0_IRQ)); + + /* Configure EXTI line 0 irq on falling and rising edge */ + exti_writel(EXTI_IMR1, 0x00000001); + exti_writel(EXTI_RTSR1, 0x00000001); + exti_writel(EXTI_FTSR1, 0x00000001); + + /* Test that an irq is raised on rising edge */ + exti_set_irq(0, 1); + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000001); + g_assert_true(check_nvic_pending(EXTI0_IRQ)); + + /* Clean the test */ + exti_writel(EXTI_PR1, 0x00000001); + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000); + unpend_nvic_irq(EXTI0_IRQ); + g_assert_false(check_nvic_pending(EXTI0_IRQ)); + + /* Test that an irq is raised on falling edge */ + exti_set_irq(0, 0); + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000001); + g_assert_true(check_nvic_pending(EXTI0_IRQ)); + + /* Clean the test */ + exti_writel(EXTI_PR1, 0x00000001); + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000); + unpend_nvic_irq(EXTI0_IRQ); + g_assert_false(check_nvic_pending(EXTI0_IRQ)); + + /* Configure EXTI line 0 irq without selecting an edge trigger */ + exti_writel(EXTI_IMR1, 0x00000001); + exti_writel(EXTI_RTSR1, 0x00000000); + exti_writel(EXTI_FTSR1, 0x00000000); + + /* Test that no irq is raised */ + exti_set_irq(0, 1); + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000); + g_assert_false(check_nvic_pending(EXTI0_IRQ)); + + exti_set_irq(0, 0); + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000); + g_assert_false(check_nvic_pending(EXTI0_IRQ)); +} + +static void test_no_software_interrupt(void) +{ + /* + * Test that software irq doesn't happen when : + * - corresponding bit in IMR isn't set + * - SWIER is set to 1 before IMR is set to 1 + */ + + /* + * Testing interrupt line EXTI0 + * Bit 0 in EXTI_*1 registers (EXTI0) corresponds to GPIO Px_0 + */ + + enable_nvic_irq(EXTI0_IRQ); + /* Check that there are no interrupts already pending in PR */ + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000); + /* Check that this specific interrupt isn't pending in NVIC */ + g_assert_false(check_nvic_pending(EXTI0_IRQ)); + + /* Mask interrupt line EXTI0 */ + exti_writel(EXTI_IMR1, 0x00000000); + /* Set the corresponding SWIER bit from '0' to '1' */ + exti_writel(EXTI_SWIER1, 0x00000000); + exti_writel(EXTI_SWIER1, 0x00000001); + + /* Check that the write in SWIER was effective */ + g_assert_cmpuint(exti_readl(EXTI_SWIER1), ==, 0x00000001); + /* Check that the pending bit in PR wasn't set */ + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000); + /* Check that the interrupt isn't pending in NVIC */ + g_assert_false(check_nvic_pending(EXTI0_IRQ)); + + /* Enable interrupt line EXTI0 */ + exti_writel(EXTI_IMR1, 0x00000001); + + /* Check that the pending bit in PR wasn't set */ + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000); + /* Check that the interrupt isn't pending in NVIC */ + g_assert_false(check_nvic_pending(EXTI0_IRQ)); + + /* + * Testing interrupt line EXTI35 + * Bit 3 in EXTI_*2 registers (EXTI35) corresponds to PVM 1 Wakeup + */ + + enable_nvic_irq(EXTI35_IRQ); + /* Check that there are no interrupts already pending in PR */ + g_assert_cmpuint(exti_readl(EXTI_PR2), ==, 0x00000000); + /* Check that this specific interrupt isn't pending in NVIC */ + g_assert_false(check_nvic_pending(EXTI35_IRQ)); + + /* Mask interrupt line EXTI35 */ + exti_writel(EXTI_IMR2, 0x00000000); + /* Set the corresponding SWIER bit from '0' to '1' */ + exti_writel(EXTI_SWIER2, 0x00000000); + exti_writel(EXTI_SWIER2, 0x00000008); + + /* Check that the write in SWIER was effective */ + g_assert_cmpuint(exti_readl(EXTI_SWIER2), ==, 0x00000008); + /* Check that the pending bit in PR wasn't set */ + g_assert_cmpuint(exti_readl(EXTI_PR2), ==, 0x00000000); + /* Check that the interrupt isn't pending in NVIC */ + g_assert_false(check_nvic_pending(EXTI35_IRQ)); + + /* Enable interrupt line EXTI35 */ + exti_writel(EXTI_IMR2, 0x00000008); + + /* Check that the pending bit in PR wasn't set */ + g_assert_cmpuint(exti_readl(EXTI_PR2), ==, 0x00000000); + /* Check that the interrupt isn't pending in NVIC */ + g_assert_false(check_nvic_pending(EXTI35_IRQ)); +} + +static void test_masked_interrupt(void) +{ + /* + * Test that irq doesn't happen when : + * - corresponding bit in IMR isn't set + * - SWIER is set to 1 before IMR is set to 1 + */ + + /* + * Testing interrupt line EXTI1 + * with rising edge from GPIOx pin 1 + */ + + enable_nvic_irq(EXTI1_IRQ); + /* Check that there are no interrupts already pending in PR */ + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000); + /* Check that this specific interrupt isn't pending in NVIC */ + g_assert_false(check_nvic_pending(EXTI1_IRQ)); + + /* Mask interrupt line EXTI1 */ + exti_writel(EXTI_IMR1, 0x00000000); + + /* Configure interrupt on rising edge */ + exti_writel(EXTI_RTSR1, 0x00000002); + + /* Simulate rising edge from GPIO line 1 */ + exti_set_irq(1, 1); + + /* Check that the pending bit in PR wasn't set */ + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000); + /* Check that the interrupt isn't pending in NVIC */ + g_assert_false(check_nvic_pending(EXTI1_IRQ)); + + /* Enable interrupt line EXTI1 */ + exti_writel(EXTI_IMR1, 0x00000002); + + /* Check that the pending bit in PR wasn't set */ + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000); + /* Check that the interrupt isn't pending in NVIC */ + g_assert_false(check_nvic_pending(EXTI1_IRQ)); +} + +static void test_interrupt(void) +{ + /* + * Test that we can launch an irq by : + * - enabling its line in IMR + * - configuring interrupt on rising edge + * - and then setting the input line from '0' to '1' + * + * And that the interruption stays pending in NVIC + * even after clearing the pending bit in PR. + */ + + /* + * Testing interrupt line EXTI1 + * with rising edge from GPIOx pin 1 + */ + + enable_nvic_irq(EXTI1_IRQ); + /* Check that there are no interrupts already pending in PR */ + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000); + /* Check that this specific interrupt isn't pending in NVIC */ + g_assert_false(check_nvic_pending(EXTI1_IRQ)); + + /* Enable interrupt line EXTI1 */ + exti_writel(EXTI_IMR1, 0x00000002); + + /* Configure interrupt on rising edge */ + exti_writel(EXTI_RTSR1, 0x00000002); + + /* Simulate rising edge from GPIO line 1 */ + exti_set_irq(1, 1); + + /* Check that the pending bit in PR was set */ + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000002); + /* Check that the interrupt is pending in NVIC */ + g_assert_true(check_nvic_pending(EXTI1_IRQ)); + + /* Clear the pending bit in PR */ + exti_writel(EXTI_PR1, 0x00000002); + + /* Check that the write in PR was effective */ + g_assert_cmpuint(exti_readl(EXTI_PR1), ==, 0x00000000); + /* Check that the interrupt is still pending in the NVIC */ + g_assert_true(check_nvic_pending(EXTI1_IRQ)); + + /* Clean NVIC */ + unpend_nvic_irq(EXTI1_IRQ); + g_assert_false(check_nvic_pending(EXTI1_IRQ)); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + g_test_set_nonfatal_assertions(); + qtest_add_func("stm32l4x5/exti/direct_lines", test_direct_lines_write); + qtest_add_func("stm32l4x5/exti/reserved_bits", test_reserved_bits_write); + qtest_add_func("stm32l4x5/exti/reg_write_read", test_reg_write_read); + qtest_add_func("stm32l4x5/exti/no_software_interrupt", + test_no_software_interrupt); + qtest_add_func("stm32l4x5/exti/software_interrupt", + test_software_interrupt); + qtest_add_func("stm32l4x5/exti/masked_interrupt", test_masked_interrupt); + qtest_add_func("stm32l4x5/exti/interrupt", test_interrupt); + qtest_add_func("stm32l4x5/exti/test_edge_selector", test_edge_selector); + + qtest_start("-machine b-l475e-iot01a"); + ret = g_test_run(); + qtest_end(); + + return ret; +}