@@ -12,17 +12,16 @@ USART, I2C, SPI, CAN and USB OTG, as well as a variety of sensors.
Supported devices
"""""""""""""""""
-Currently, B-L475E-IOT01A machine's implementation is minimal,
-it only supports the following device:
+Currently B-L475E-IOT01A machine's only supports the following devices:
- Cortex-M4F based STM32L4x5 SoC
+- STM32L4x5 EXTI (Extended interrupts and events controller)
Missing devices
"""""""""""""""
The B-L475E-IOT01A does *not* support the following devices:
-- Extended interrupts and events controller (EXTI)
- Reset and clock control (RCC)
- Serial ports (UART)
- System configuration controller (SYSCFG)
@@ -87,6 +87,9 @@ config STM32F4XX_SYSCFG
config STM32F4XX_EXTI
bool
+config STM32L4X5_EXTI
+ bool
+
config MIPS_ITU
bool
@@ -110,6 +110,7 @@ system_ss.add(when: 'CONFIG_XLNX_VERSAL_TRNG', if_true: files(
system_ss.add(when: 'CONFIG_STM32F2XX_SYSCFG', if_true: files('stm32f2xx_syscfg.c'))
system_ss.add(when: 'CONFIG_STM32F4XX_SYSCFG', if_true: files('stm32f4xx_syscfg.c'))
system_ss.add(when: 'CONFIG_STM32F4XX_EXTI', if_true: files('stm32f4xx_exti.c'))
+system_ss.add(when: 'CONFIG_STM32L4X5_EXTI', if_true: files('stm32l4x5_exti.c'))
system_ss.add(when: 'CONFIG_MPS2_FPGAIO', if_true: files('mps2-fpgaio.c'))
system_ss.add(when: 'CONFIG_MPS2_SCC', if_true: files('mps2-scc.c'))
new file mode 100644
@@ -0,0 +1,290 @@
+/*
+ * STM32L4x5 EXTI (Extended interrupts and events controller)
+ *
+ * Copyright (c) 2023 Arnaud Minier <arnaud.minier@telecom-paris.fr>
+ * Copyright (c) 2023 Samuel Tardieu <samuel.tardieu@telecom-paris.fr>
+ * Copyright (c) 2023 Inès Varhol <ines.varhol@telecom-paris.fr>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ * This work is based on the stm32f4xx_exti by Alistair Francis.
+ * Original code is licensed under the MIT License:
+ *
+ * Copyright (c) 2014 Alistair Francis <alistair@alistair23.me>
+ */
+
+/*
+ * The reference used is the STMicroElectronics RM0351 Reference manual
+ * for STM32L4x5 and STM32L4x6 advanced Arm ® -based 32-bit MCUs.
+ * https://www.st.com/en/microcontrollers-microprocessors/stm32l4x5/documentation.html
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "trace.h"
+#include "hw/irq.h"
+#include "migration/vmstate.h"
+#include "hw/misc/stm32l4x5_exti.h"
+
+#define EXTI_IMR1 0x00
+#define EXTI_EMR1 0x04
+#define EXTI_RTSR1 0x08
+#define EXTI_FTSR1 0x0C
+#define EXTI_SWIER1 0x10
+#define EXTI_PR1 0x14
+#define EXTI_IMR2 0x20
+#define EXTI_EMR2 0x24
+#define EXTI_RTSR2 0x28
+#define EXTI_FTSR2 0x2C
+#define EXTI_SWIER2 0x30
+#define EXTI_PR2 0x34
+
+#define EXTI_NUM_GPIO_EVENT_IN_LINES 16
+#define EXTI_MAX_IRQ_PER_BANK 32
+#define EXTI_IRQS_BANK0 32
+#define EXTI_IRQS_BANK1 8
+
+static const unsigned irqs_per_bank[EXTI_NUM_REGISTER] = {
+ EXTI_IRQS_BANK0,
+ EXTI_IRQS_BANK1,
+};
+
+static const uint32_t exti_romask[EXTI_NUM_REGISTER] = {
+ 0xff820000, /* 0b11111111_10000010_00000000_00000000 */
+ 0x00000087, /* 0b00000000_00000000_00000000_10000111 */
+};
+
+static unsigned regbank_index_by_irq(unsigned irq)
+{
+ return irq >= EXTI_MAX_IRQ_PER_BANK ? 1 : 0;
+}
+
+static unsigned regbank_index_by_addr(hwaddr addr)
+{
+ return addr >= EXTI_IMR2 ? 1 : 0;
+}
+
+static unsigned valid_mask(unsigned bank)
+{
+ return MAKE_64BIT_MASK(0, irqs_per_bank[bank]);
+}
+
+static unsigned configurable_mask(unsigned bank)
+{
+ return valid_mask(bank) & ~exti_romask[bank];
+}
+
+static void stm32l4x5_exti_reset_hold(Object *obj)
+{
+ Stm32l4x5ExtiState *s = STM32L4X5_EXTI(obj);
+
+ for (unsigned bank = 0; bank < EXTI_NUM_REGISTER; bank++) {
+ s->imr[bank] = exti_romask[bank];
+ s->emr[bank] = 0x00000000;
+ s->rtsr[bank] = 0x00000000;
+ s->ftsr[bank] = 0x00000000;
+ s->swier[bank] = 0x00000000;
+ s->pr[bank] = 0x00000000;
+ }
+}
+
+static void stm32l4x5_exti_set_irq(void *opaque, int irq, int level)
+{
+ Stm32l4x5ExtiState *s = opaque;
+ const unsigned bank = regbank_index_by_irq(irq);
+ const int oirq = irq;
+
+ trace_stm32l4x5_exti_set_irq(irq, level);
+
+ /* Shift the value to enable access in x2 registers. */
+ irq %= EXTI_MAX_IRQ_PER_BANK;
+
+ /* If the interrupt is masked, pr won't be raised */
+ if (!extract32(s->imr[bank], irq, 1)) {
+ return;
+ }
+
+ if (((1 << irq) & s->rtsr[bank]) && level) {
+ /* Rising Edge */
+ s->pr[bank] |= 1 << irq;
+ qemu_irq_pulse(s->irq[oirq]);
+ } else if (((1 << irq) & s->ftsr[bank]) && !level) {
+ /* Falling Edge */
+ s->pr[bank] |= 1 << irq;
+ qemu_irq_pulse(s->irq[oirq]);
+ }
+ /*
+ * In the following situations :
+ * - falling edge but rising trigger selected
+ * - rising edge but falling trigger selected
+ * - no trigger selected
+ * No action is required
+ */
+}
+
+static uint64_t stm32l4x5_exti_read(void *opaque, hwaddr addr,
+ unsigned int size)
+{
+ Stm32l4x5ExtiState *s = opaque;
+ uint32_t r = 0;
+ const unsigned bank = regbank_index_by_addr(addr);
+
+ switch (addr) {
+ case EXTI_IMR1:
+ case EXTI_IMR2:
+ r = s->imr[bank];
+ break;
+ case EXTI_EMR1:
+ case EXTI_EMR2:
+ r = s->emr[bank];
+ break;
+ case EXTI_RTSR1:
+ case EXTI_RTSR2:
+ r = s->rtsr[bank];
+ break;
+ case EXTI_FTSR1:
+ case EXTI_FTSR2:
+ r = s->ftsr[bank];
+ break;
+ case EXTI_SWIER1:
+ case EXTI_SWIER2:
+ r = s->swier[bank];
+ break;
+ case EXTI_PR1:
+ case EXTI_PR2:
+ r = s->pr[bank];
+ break;
+
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "STM32L4X5_exti_read: Bad offset 0x%" HWADDR_PRIx "\n",
+ addr);
+ break;
+ }
+
+ trace_stm32l4x5_exti_read(addr, r);
+
+ return r;
+}
+
+static void stm32l4x5_exti_write(void *opaque, hwaddr addr,
+ uint64_t val64, unsigned int size)
+{
+ Stm32l4x5ExtiState *s = opaque;
+ const unsigned bank = regbank_index_by_addr(addr);
+
+ trace_stm32l4x5_exti_write(addr, val64);
+
+ switch (addr) {
+ case EXTI_IMR1:
+ case EXTI_IMR2:
+ s->imr[bank] = val64 & valid_mask(bank);
+ return;
+ case EXTI_EMR1:
+ case EXTI_EMR2:
+ s->emr[bank] = val64 & valid_mask(bank);
+ return;
+ case EXTI_RTSR1:
+ case EXTI_RTSR2:
+ s->rtsr[bank] = val64 & configurable_mask(bank);
+ return;
+ case EXTI_FTSR1:
+ case EXTI_FTSR2:
+ s->ftsr[bank] = val64 & configurable_mask(bank);
+ return;
+ case EXTI_SWIER1:
+ case EXTI_SWIER2: {
+ const uint32_t set = val64 & configurable_mask(bank);
+ const uint32_t pend = set & ~s->swier[bank] & s->imr[bank] &
+ ~s->pr[bank];
+ s->swier[bank] = set;
+ s->pr[bank] |= pend;
+ for (unsigned i = 0; i < irqs_per_bank[bank]; i++) {
+ if (extract32(pend, i, 1)) {
+ qemu_irq_pulse(s->irq[i + 32 * bank]);
+ }
+ }
+ return;
+ }
+ case EXTI_PR1:
+ case EXTI_PR2: {
+ const uint32_t cleared = s->pr[bank] & val64 & configurable_mask(bank);
+ /* This bit is cleared by writing a 1 to it */
+ s->pr[bank] &= ~cleared;
+ /* Software triggered interrupts are cleared as well */
+ s->swier[bank] &= ~cleared;
+ return;
+ }
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "STM32L4X5_exti_write: Bad offset 0x%" HWADDR_PRIx "\n",
+ addr);
+ }
+}
+
+static const MemoryRegionOps stm32l4x5_exti_ops = {
+ .read = stm32l4x5_exti_read,
+ .write = stm32l4x5_exti_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+ .impl.min_access_size = 4,
+ .impl.max_access_size = 4,
+ .impl.unaligned = false,
+ .valid.min_access_size = 4,
+ .valid.max_access_size = 4,
+ .valid.unaligned = false,
+};
+
+static void stm32l4x5_exti_init(Object *obj)
+{
+ Stm32l4x5ExtiState *s = STM32L4X5_EXTI(obj);
+
+ for (size_t i = 0; i < EXTI_NUM_INTERRUPT_OUT_LINES; i++) {
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq[i]);
+ }
+
+ memory_region_init_io(&s->mmio, obj, &stm32l4x5_exti_ops, s,
+ TYPE_STM32L4X5_EXTI, 0x400);
+ sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
+
+ qdev_init_gpio_in(DEVICE(obj), stm32l4x5_exti_set_irq,
+ EXTI_NUM_GPIO_EVENT_IN_LINES);
+}
+
+static const VMStateDescription vmstate_stm32l4x5_exti = {
+ .name = TYPE_STM32L4X5_EXTI,
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT32_ARRAY(imr, Stm32l4x5ExtiState, EXTI_NUM_REGISTER),
+ VMSTATE_UINT32_ARRAY(emr, Stm32l4x5ExtiState, EXTI_NUM_REGISTER),
+ VMSTATE_UINT32_ARRAY(rtsr, Stm32l4x5ExtiState, EXTI_NUM_REGISTER),
+ VMSTATE_UINT32_ARRAY(ftsr, Stm32l4x5ExtiState, EXTI_NUM_REGISTER),
+ VMSTATE_UINT32_ARRAY(swier, Stm32l4x5ExtiState, EXTI_NUM_REGISTER),
+ VMSTATE_UINT32_ARRAY(pr, Stm32l4x5ExtiState, EXTI_NUM_REGISTER),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void stm32l4x5_exti_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ ResettableClass *rc = RESETTABLE_CLASS(klass);
+
+ dc->vmsd = &vmstate_stm32l4x5_exti;
+ rc->phases.hold = stm32l4x5_exti_reset_hold;
+}
+
+static const TypeInfo stm32l4x5_exti_types[] = {
+ {
+ .name = TYPE_STM32L4X5_EXTI,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(Stm32l4x5ExtiState),
+ .instance_init = stm32l4x5_exti_init,
+ .class_init = stm32l4x5_exti_class_init,
+ }
+};
+
+DEFINE_TYPES(stm32l4x5_exti_types)
@@ -163,6 +163,11 @@ stm32f4xx_exti_set_irq(int irq, int level) "Set EXTI: %d to %d"
stm32f4xx_exti_read(uint64_t addr) "reg read: addr: 0x%" PRIx64 " "
stm32f4xx_exti_write(uint64_t addr, uint64_t data) "reg write: addr: 0x%" PRIx64 " val: 0x%" PRIx64 ""
+# stm32l4x5_exti.c
+stm32l4x5_exti_set_irq(int irq, int level) "Set EXTI: %d to %d"
+stm32l4x5_exti_read(uint64_t addr, uint64_t data) "reg read: addr: 0x%" PRIx64 " val: 0x%" PRIx64 ""
+stm32l4x5_exti_write(uint64_t addr, uint64_t data) "reg write: addr: 0x%" PRIx64 " val: 0x%" PRIx64 ""
+
# tz-mpc.c
tz_mpc_reg_read(uint32_t offset, uint64_t data, unsigned size) "TZ MPC regs read: offset 0x%x data 0x%" PRIx64 " size %u"
tz_mpc_reg_write(uint32_t offset, uint64_t data, unsigned size) "TZ MPC regs write: offset 0x%x data 0x%" PRIx64 " size %u"
new file mode 100644
@@ -0,0 +1,51 @@
+/*
+ * STM32L4x5 EXTI (Extended interrupts and events controller)
+ *
+ * Copyright (c) 2023 Arnaud Minier <arnaud.minier@telecom-paris.fr>
+ * Copyright (c) 2023 Inès Varhol <ines.varhol@telecom-paris.fr>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ * This work is based on the stm32f4xx_exti by Alistair Francis.
+ * Original code is licensed under the MIT License:
+ *
+ * Copyright (c) 2014 Alistair Francis <alistair@alistair23.me>
+ */
+
+/*
+ * The reference used is the STMicroElectronics RM0351 Reference manual
+ * for STM32L4x5 and STM32L4x6 advanced Arm ® -based 32-bit MCUs.
+ * https://www.st.com/en/microcontrollers-microprocessors/stm32l4x5/documentation.html
+ */
+
+#ifndef HW_STM32L4X5_EXTI_H
+#define HW_STM32L4X5_EXTI_H
+
+#include "hw/sysbus.h"
+#include "qom/object.h"
+
+#define TYPE_STM32L4X5_EXTI "stm32l4x5-exti"
+OBJECT_DECLARE_SIMPLE_TYPE(Stm32l4x5ExtiState, STM32L4X5_EXTI)
+
+#define EXTI_NUM_INTERRUPT_OUT_LINES 40
+#define EXTI_NUM_REGISTER 2
+
+struct Stm32l4x5ExtiState {
+ SysBusDevice parent_obj;
+
+ MemoryRegion mmio;
+
+ uint32_t imr[EXTI_NUM_REGISTER];
+ uint32_t emr[EXTI_NUM_REGISTER];
+ uint32_t rtsr[EXTI_NUM_REGISTER];
+ uint32_t ftsr[EXTI_NUM_REGISTER];
+ uint32_t swier[EXTI_NUM_REGISTER];
+ uint32_t pr[EXTI_NUM_REGISTER];
+
+ qemu_irq irq[EXTI_NUM_INTERRUPT_OUT_LINES];
+};
+
+#endif