===================================================================
@@ -346,10 +346,11 @@ static int scsi_disk_emulate_inquiry(SCS
case 0x00: /* Supported page codes, mandatory */
DPRINTF("Inquiry EVPD[Supported pages] "
"buffer size %zd\n", req->cmd.xfer);
- outbuf[buflen++] = 3; // number of pages
+ outbuf[buflen++] = 4; // number of pages
outbuf[buflen++] = 0x00; // list of supported pages (this page)
outbuf[buflen++] = 0x80; // unit serial number
outbuf[buflen++] = 0x83; // device identification
+ outbuf[buflen++] = 0xb0; // block device characteristics
break;
case 0x80: /* Device serial number, optional */
@@ -391,6 +392,27 @@ static int scsi_disk_emulate_inquiry(SCS
buflen += id_len;
break;
}
+ case 0xb0: /* block device characteristics */
+ {
+ unsigned int min_io_size = bdrv_get_min_io_size(bdrv) >> 9;
+ unsigned int opt_io_size = bdrv_get_opt_io_size(bdrv) >> 9;
+
+ /* required VPD size with unmap support */
+ outbuf[3] = buflen = 0x3c;
+
+ memset(outbuf + 4, 0, buflen - 4);
+
+ /* optimal transfer length granularity */
+ outbuf[6] = (min_io_size >> 8) & 0xff;
+ outbuf[7] = min_io_size & 0xff;
+
+ /* optimal transfer length */
+ outbuf[12] = (opt_io_size >> 24) & 0xff;
+ outbuf[13] = (opt_io_size >> 16) & 0xff;
+ outbuf[14] = (opt_io_size >> 8) & 0xff;
+ outbuf[15] = opt_io_size & 0xff;
+ break;
+ }
default:
BADF("Error: unsupported Inquiry (EVPD[%02X]) "
"buffer size %zd\n", page_code, req->cmd.xfer);
@@ -437,7 +459,7 @@ static int scsi_disk_emulate_inquiry(SCS
memcpy(&outbuf[32], s->version ? s->version : QEMU_VERSION, 4);
/* Identify device as SCSI-3 rev 1.
Some later commands are also implemented. */
- outbuf[2] = 3;
+ outbuf[2] = 5;
outbuf[3] = 2; /* Format 2 */
if (buflen > 36) {
@@ -794,6 +816,8 @@ static int scsi_disk_emulate_command(SCS
outbuf[9] = 0;
outbuf[10] = s->cluster_size * 2;
outbuf[11] = 0;
+ outbuf[12] = 0;
+ outbuf[13] = bdrv_get_physical_block_exp(bdrv);
/* Protection, exponent and lowest lba field left blank. */
buflen = req->cmd.xfer;
break;
Export the physical block size in the READ CAPACITY (16) command, and add the new block limits VPD page to export the minimum and optiomal I/O sizes. Note that we also need to bump the scsi revision level to SPC-2 as that is the minimum requirement by at least the Linux kernel to try READ CAPACITY (16) first and look at the block limits VPD page. Signed-off-by: Christoph Hellwig <hch@lst.de>