@@ -1180,7 +1180,7 @@ static void vfio_disable_interrupts(VFIOPCIDevice *vdev)
}
}
-static int vfio_msi_setup(VFIOPCIDevice *vdev, int pos)
+static int vfio_msi_setup(VFIOPCIDevice *vdev, int pos, Error **errp)
{
uint16_t ctrl;
bool msi_64bit, msi_maskbit;
@@ -1189,6 +1189,7 @@ static int vfio_msi_setup(VFIOPCIDevice *vdev, int pos)
if (pread(vdev->vbasedev.fd, &ctrl, sizeof(ctrl),
vdev->config_offset + pos + PCI_CAP_FLAGS) != sizeof(ctrl)) {
+ error_setg_errno(errp, errno, "failed reading PCI_CAP_FLAGS");
return -errno;
}
ctrl = le16_to_cpu(ctrl);
@@ -1204,8 +1205,8 @@ static int vfio_msi_setup(VFIOPCIDevice *vdev, int pos)
if (ret == -ENOTSUP) {
return 0;
}
- error_prepend(&err, "vfio: msi_init failed: ");
- error_report_err(err);
+ error_prepend(&err, "msi_init failed: ");
+ error_propagate(errp, err);
return ret;
}
vdev->msi_cap_size = 0xa + (msi_maskbit ? 0xa : 0) + (msi_64bit ? 0x4 : 0);
@@ -1363,7 +1364,7 @@ static int vfio_msix_early_setup(VFIOPCIDevice *vdev, Error **errp)
return 0;
}
-static int vfio_msix_setup(VFIOPCIDevice *vdev, int pos)
+static int vfio_msix_setup(VFIOPCIDevice *vdev, int pos, Error **errp)
{
int ret;
@@ -1378,7 +1379,7 @@ static int vfio_msix_setup(VFIOPCIDevice *vdev, int pos)
if (ret == -ENOTSUP) {
return 0;
}
- error_report("vfio: msix_init failed");
+ error_setg(errp, "msix_init failed");
return ret;
}
@@ -1563,7 +1564,8 @@ static void vfio_add_emulated_long(VFIOPCIDevice *vdev, int pos,
vfio_set_long_bits(vdev->emulated_config_bits + pos, mask, mask);
}
-static int vfio_setup_pcie_cap(VFIOPCIDevice *vdev, int pos, uint8_t size)
+static int vfio_setup_pcie_cap(VFIOPCIDevice *vdev, int pos, uint8_t size,
+ Error **errp)
{
uint16_t flags;
uint8_t type;
@@ -1575,8 +1577,8 @@ static int vfio_setup_pcie_cap(VFIOPCIDevice *vdev, int pos, uint8_t size)
type != PCI_EXP_TYPE_LEG_END &&
type != PCI_EXP_TYPE_RC_END) {
- error_report("vfio: Assignment of PCIe type 0x%x "
- "devices is not currently supported", type);
+ error_setg(errp, "assignment of PCIe type 0x%x "
+ "devices is not currently supported", type);
return -EINVAL;
}
@@ -1710,7 +1712,7 @@ static void vfio_check_af_flr(VFIOPCIDevice *vdev, uint8_t pos)
}
}
-static int vfio_add_std_cap(VFIOPCIDevice *vdev, uint8_t pos)
+static int vfio_add_std_cap(VFIOPCIDevice *vdev, uint8_t pos, Error **errp)
{
PCIDevice *pdev = &vdev->pdev;
uint8_t cap_id, next, size;
@@ -1735,9 +1737,9 @@ static int vfio_add_std_cap(VFIOPCIDevice *vdev, uint8_t pos)
* will be changed as we unwind the stack.
*/
if (next) {
- ret = vfio_add_std_cap(vdev, next);
+ ret = vfio_add_std_cap(vdev, next, errp);
if (ret) {
- return ret;
+ goto out;
}
} else {
/* Begin the rebuild, use QEMU emulated list bits */
@@ -1751,40 +1753,40 @@ static int vfio_add_std_cap(VFIOPCIDevice *vdev, uint8_t pos)
switch (cap_id) {
case PCI_CAP_ID_MSI:
- ret = vfio_msi_setup(vdev, pos);
+ ret = vfio_msi_setup(vdev, pos, errp);
break;
case PCI_CAP_ID_EXP:
vfio_check_pcie_flr(vdev, pos);
- ret = vfio_setup_pcie_cap(vdev, pos, size);
+ ret = vfio_setup_pcie_cap(vdev, pos, size, errp);
break;
case PCI_CAP_ID_MSIX:
- ret = vfio_msix_setup(vdev, pos);
+ ret = vfio_msix_setup(vdev, pos, errp);
break;
case PCI_CAP_ID_PM:
vfio_check_pm_reset(vdev, pos);
vdev->pm_cap = pos;
- ret = pci_add_capability(pdev, cap_id, pos, size);
+ ret = pci_add_capability2(pdev, cap_id, pos, size, errp);
break;
case PCI_CAP_ID_AF:
vfio_check_af_flr(vdev, pos);
- ret = pci_add_capability(pdev, cap_id, pos, size);
+ ret = pci_add_capability2(pdev, cap_id, pos, size, errp);
break;
default:
- ret = pci_add_capability(pdev, cap_id, pos, size);
+ ret = pci_add_capability2(pdev, cap_id, pos, size, errp);
break;
}
-
+out:
if (ret < 0) {
- error_report("vfio: %s Error adding PCI capability "
- "0x%x[0x%x]@0x%x: %d", vdev->vbasedev.name,
- cap_id, size, pos, ret);
+ error_prepend(errp,
+ "failed to add PCI capability 0x%x[0x%x]@0x%x: ",
+ cap_id, size, pos);
return ret;
}
return 0;
}
-static int vfio_add_ext_cap(VFIOPCIDevice *vdev)
+static void vfio_add_ext_cap(VFIOPCIDevice *vdev)
{
PCIDevice *pdev = &vdev->pdev;
uint32_t header;
@@ -1795,7 +1797,7 @@ static int vfio_add_ext_cap(VFIOPCIDevice *vdev)
/* Only add extended caps if we have them and the guest can see them */
if (!pci_is_express(pdev) || !pci_bus_is_express(pdev->bus) ||
!pci_get_long(pdev->config + PCI_CONFIG_SPACE_SIZE)) {
- return 0;
+ return;
}
/*
@@ -1860,10 +1862,10 @@ static int vfio_add_ext_cap(VFIOPCIDevice *vdev)
}
g_free(config);
- return 0;
+ return;
}
-static int vfio_add_capabilities(VFIOPCIDevice *vdev)
+static int vfio_add_capabilities(VFIOPCIDevice *vdev, Error **errp)
{
PCIDevice *pdev = &vdev->pdev;
int ret;
@@ -1873,12 +1875,13 @@ static int vfio_add_capabilities(VFIOPCIDevice *vdev)
return 0; /* Nothing to add */
}
- ret = vfio_add_std_cap(vdev, pdev->config[PCI_CAPABILITY_LIST]);
+ ret = vfio_add_std_cap(vdev, pdev->config[PCI_CAPABILITY_LIST], errp);
if (ret) {
return ret;
}
- return vfio_add_ext_cap(vdev);
+ vfio_add_ext_cap(vdev);
+ return 0;
}
static void vfio_pci_pre_reset(VFIOPCIDevice *vdev)
@@ -2684,7 +2687,7 @@ static int vfio_initfn(PCIDevice *pdev)
vfio_bars_setup(vdev);
- ret = vfio_add_capabilities(vdev);
+ ret = vfio_add_capabilities(vdev, &err);
if (ret) {
goto out_teardown;
}
Pass an error object to prepare for migration to VFIO-PCI realize. The error is cascaded downto vfio_add_std_cap and then vfio_msi(x)_setup, vfio_setup_pcie_cap. vfio_add_ext_cap does not return anything else than 0 so let's transform it into a void function. Also use pci_add_capability2 which takes an error object. Signed-off-by: Eric Auger <eric.auger@redhat.com> --- v2 -> v3: - set an error on vfio_msi_setup/PCI_CAP_FLAGS pread failure - directly use errp in vfio_add_std_cap - in vfio_add_capabilities, simply pass errp down to vfio_add_std_cap --- hw/vfio/pci.c | 59 +++++++++++++++++++++++++++++++---------------------------- 1 file changed, 31 insertions(+), 28 deletions(-)