@@ -100,7 +100,7 @@ static void vfio_intx_eoi(VFIODevice *vbasedev)
vfio_unmask_single_irqindex(vbasedev, VFIO_PCI_INTX_IRQ_INDEX);
}
-static void vfio_intx_enable_kvm(VFIOPCIDevice *vdev)
+static void vfio_intx_enable_kvm(VFIOPCIDevice *vdev, Error **errp)
{
#ifdef CONFIG_KVM
struct kvm_irqfd irqfd = {
@@ -126,7 +126,7 @@ static void vfio_intx_enable_kvm(VFIOPCIDevice *vdev)
/* Get an eventfd for resample/unmask */
if (event_notifier_init(&vdev->intx.unmask, 0)) {
- error_report("vfio: Error: event_notifier_init failed eoi");
+ error_setg(errp, "event_notifier_init failed eoi");
goto fail;
}
@@ -134,7 +134,7 @@ static void vfio_intx_enable_kvm(VFIOPCIDevice *vdev)
irqfd.resamplefd = event_notifier_get_fd(&vdev->intx.unmask);
if (kvm_vm_ioctl(kvm_state, KVM_IRQFD, &irqfd)) {
- error_report("vfio: Error: Failed to setup resample irqfd: %m");
+ error_setg_errno(errp, errno, "failed to setup resample irqfd");
goto fail_irqfd;
}
@@ -153,7 +153,7 @@ static void vfio_intx_enable_kvm(VFIOPCIDevice *vdev)
ret = ioctl(vdev->vbasedev.fd, VFIO_DEVICE_SET_IRQS, irq_set);
g_free(irq_set);
if (ret) {
- error_report("vfio: Error: Failed to setup INTx unmask fd: %m");
+ error_setg_errno(errp, -ret, "failed to setup INTx unmask fd");
goto fail_vfio;
}
@@ -222,6 +222,7 @@ static void vfio_intx_update(PCIDevice *pdev)
{
VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev);
PCIINTxRoute route;
+ Error *err = NULL;
if (vdev->interrupt != VFIO_INT_INTx) {
return;
@@ -244,18 +245,22 @@ static void vfio_intx_update(PCIDevice *pdev)
return;
}
- vfio_intx_enable_kvm(vdev);
+ vfio_intx_enable_kvm(vdev, &err);
+ if (err) {
+ error_reportf_err(err, WARN_PREFIX, vdev->vbasedev.name);
+ }
/* Re-enable the interrupt in cased we missed an EOI */
vfio_intx_eoi(&vdev->vbasedev);
}
-static int vfio_intx_enable(VFIOPCIDevice *vdev)
+static int vfio_intx_enable(VFIOPCIDevice *vdev, Error **errp)
{
uint8_t pin = vfio_pci_read_config(&vdev->pdev, PCI_INTERRUPT_PIN, 1);
int ret, argsz;
struct vfio_irq_set *irq_set;
int32_t *pfd;
+ Error *err = NULL;
if (!pin) {
return 0;
@@ -279,7 +284,7 @@ static int vfio_intx_enable(VFIOPCIDevice *vdev)
ret = event_notifier_init(&vdev->intx.interrupt, 0);
if (ret) {
- error_report("vfio: Error: event_notifier_init failed");
+ error_setg_errno(errp, -ret, "event_notifier_init failed");
return ret;
}
@@ -299,13 +304,16 @@ static int vfio_intx_enable(VFIOPCIDevice *vdev)
ret = ioctl(vdev->vbasedev.fd, VFIO_DEVICE_SET_IRQS, irq_set);
g_free(irq_set);
if (ret) {
- error_report("vfio: Error: Failed to setup INTx fd: %m");
+ error_setg_errno(errp, -ret, "failed to setup INTx fd");
qemu_set_fd_handler(*pfd, NULL, NULL, vdev);
event_notifier_cleanup(&vdev->intx.interrupt);
return -errno;
}
- vfio_intx_enable_kvm(vdev);
+ vfio_intx_enable_kvm(vdev, &err);
+ if (err) {
+ error_reportf_err(err, WARN_PREFIX, vdev->vbasedev.name);
+ }
vdev->interrupt = VFIO_INT_INTx;
@@ -707,6 +715,7 @@ retry:
static void vfio_msi_disable_common(VFIOPCIDevice *vdev)
{
+ Error *err = NULL;
int i;
for (i = 0; i < vdev->nr_vectors; i++) {
@@ -726,7 +735,10 @@ static void vfio_msi_disable_common(VFIOPCIDevice *vdev)
vdev->nr_vectors = 0;
vdev->interrupt = VFIO_INT_NONE;
- vfio_intx_enable(vdev);
+ vfio_intx_enable(vdev, &err);
+ if (err) {
+ error_reportf_err(err, ERR_PREFIX, vdev->vbasedev.name);
+ }
}
static void vfio_msix_disable(VFIOPCIDevice *vdev)
@@ -1908,7 +1920,12 @@ static void vfio_pci_pre_reset(VFIOPCIDevice *vdev)
static void vfio_pci_post_reset(VFIOPCIDevice *vdev)
{
- vfio_intx_enable(vdev);
+ Error *err = NULL;
+
+ vfio_intx_enable(vdev, &err);
+ if (err) {
+ error_reportf_err(err, ERR_PREFIX, vdev->vbasedev.name);
+ }
}
static bool vfio_pci_host_match(PCIHostDeviceAddress *addr, const char *name)
@@ -2724,7 +2741,7 @@ static int vfio_initfn(PCIDevice *pdev)
vdev->intx.mmap_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL,
vfio_intx_mmap_enable, vdev);
pci_device_set_intx_routing_notifier(&vdev->pdev, vfio_intx_update);
- ret = vfio_intx_enable(vdev);
+ ret = vfio_intx_enable(vdev, &err);
if (ret) {
goto out_teardown;
}
Pass an error object to prepare for migration to VFIO-PCI realize. The error object is propagated down to vfio_intx_enable_kvm(). The three other callers, vfio_intx_enable_kvm(), vfio_msi_disable_common() and vfio_pci_post_reset() do not propagate the error and simply call error_reportf_err() with the ERR_PREFIX formatting. Signed-off-by: Eric Auger <eric.auger@redhat.com> --- v2 -> V3: - reword commit message according to Markus' suggestion - fix a regression introduced by considering vfio_intx_enable_kvm failure as an error instead of as a warning. v2: creation --- hw/vfio/pci.c | 41 +++++++++++++++++++++++++++++------------ 1 file changed, 29 insertions(+), 12 deletions(-)