diff mbox

[02/13] ide: fix whitespace gap in ide_exec_cmd

Message ID 1291810400-11309-3-git-send-email-agraf@suse.de
State New
Headers show

Commit Message

Alexander Graf Dec. 8, 2010, 12:13 p.m. UTC
Now that we have the function split out, we have to reindent it.
In order to increase the readability of the actual functional change,
this is split out.

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 hw/ide/core.c |  734 ++++++++++++++++++++++++++++----------------------------
 1 files changed, 367 insertions(+), 367 deletions(-)

Comments

Stefan Hajnoczi Dec. 8, 2010, 1:32 p.m. UTC | #1
On Wed, Dec 8, 2010 at 12:13 PM, Alexander Graf <agraf@suse.de> wrote:
> Now that we have the function split out, we have to reindent it.
> In order to increase the readability of the actual functional change,
> this is split out.
>
> Signed-off-by: Alexander Graf <agraf@suse.de>
> ---
>  hw/ide/core.c |  734 ++++++++++++++++++++++++++++----------------------------
>  1 files changed, 367 insertions(+), 367 deletions(-)

Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Kevin Wolf Dec. 8, 2010, 2:59 p.m. UTC | #2
Am 08.12.2010 13:13, schrieb Alexander Graf:
> Now that we have the function split out, we have to reindent it.
> In order to increase the readability of the actual functional change,
> this is split out.
> 
> Signed-off-by: Alexander Graf <agraf@suse.de>

This patch "adds" some trailing whitespace. Can you take the chance to
remove it?

Kevin
diff mbox

Patch

diff --git a/hw/ide/core.c b/hw/ide/core.c
index ac4ee71..5e2fcbd 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -1864,423 +1864,423 @@  void ide_exec_cmd(IDEBus *bus, uint32_t val)
     int lba48 = 0;
 
 #if defined(DEBUG_IDE)
-        printf("ide: CMD=%02x\n", val);
+    printf("ide: CMD=%02x\n", val);
 #endif
-        s = idebus_active_if(bus);
-        /* ignore commands to non existant slave */
-        if (s != bus->ifs && !s->bs)
-            return;
+    s = idebus_active_if(bus);
+    /* ignore commands to non existant slave */
+    if (s != bus->ifs && !s->bs)
+        return;
 
-        /* Only DEVICE RESET is allowed while BSY or/and DRQ are set */
-        if ((s->status & (BUSY_STAT|DRQ_STAT)) && val != WIN_DEVICE_RESET)
-            return;
+    /* Only DEVICE RESET is allowed while BSY or/and DRQ are set */
+    if ((s->status & (BUSY_STAT|DRQ_STAT)) && val != WIN_DEVICE_RESET)
+        return;
 
-        switch(val) {
-        case WIN_IDENTIFY:
-            if (s->bs && s->drive_kind != IDE_CD) {
-                if (s->drive_kind != IDE_CFATA)
-                    ide_identify(s);
-                else
-                    ide_cfata_identify(s);
-                s->status = READY_STAT | SEEK_STAT;
-                ide_transfer_start(s, s->io_buffer, 512, ide_transfer_stop);
-            } else {
-                if (s->drive_kind == IDE_CD) {
-                    ide_set_signature(s);
-                }
-                ide_abort_command(s);
-            }
-            ide_set_irq(s->bus);
-            break;
-        case WIN_SPECIFY:
-        case WIN_RECAL:
-            s->error = 0;
+    switch(val) {
+    case WIN_IDENTIFY:
+        if (s->bs && s->drive_kind != IDE_CD) {
+            if (s->drive_kind != IDE_CFATA)
+                ide_identify(s);
+            else
+                ide_cfata_identify(s);
             s->status = READY_STAT | SEEK_STAT;
-            ide_set_irq(s->bus);
-            break;
-        case WIN_SETMULT:
-            if (s->drive_kind == IDE_CFATA && s->nsector == 0) {
-                /* Disable Read and Write Multiple */
-                s->mult_sectors = 0;
-                s->status = READY_STAT | SEEK_STAT;
-            } else if ((s->nsector & 0xff) != 0 &&
-                ((s->nsector & 0xff) > MAX_MULT_SECTORS ||
-                 (s->nsector & (s->nsector - 1)) != 0)) {
-                ide_abort_command(s);
-            } else {
-                s->mult_sectors = s->nsector & 0xff;
-                s->status = READY_STAT | SEEK_STAT;
+            ide_transfer_start(s, s->io_buffer, 512, ide_transfer_stop);
+        } else {
+            if (s->drive_kind == IDE_CD) {
+                ide_set_signature(s);
             }
-            ide_set_irq(s->bus);
-            break;
-        case WIN_VERIFY_EXT:
-	    lba48 = 1;
-        case WIN_VERIFY:
-        case WIN_VERIFY_ONCE:
-            /* do sector number check ? */
-	    ide_cmd_lba48_transform(s, lba48);
+            ide_abort_command(s);
+        }
+        ide_set_irq(s->bus);
+        break;
+    case WIN_SPECIFY:
+    case WIN_RECAL:
+        s->error = 0;
+        s->status = READY_STAT | SEEK_STAT;
+        ide_set_irq(s->bus);
+        break;
+    case WIN_SETMULT:
+        if (s->drive_kind == IDE_CFATA && s->nsector == 0) {
+            /* Disable Read and Write Multiple */
+            s->mult_sectors = 0;
             s->status = READY_STAT | SEEK_STAT;
-            ide_set_irq(s->bus);
-            break;
+        } else if ((s->nsector & 0xff) != 0 &&
+            ((s->nsector & 0xff) > MAX_MULT_SECTORS ||
+             (s->nsector & (s->nsector - 1)) != 0)) {
+            ide_abort_command(s);
+        } else {
+            s->mult_sectors = s->nsector & 0xff;
+            s->status = READY_STAT | SEEK_STAT;
+        }
+        ide_set_irq(s->bus);
+        break;
+    case WIN_VERIFY_EXT:
+	lba48 = 1;
+    case WIN_VERIFY:
+    case WIN_VERIFY_ONCE:
+        /* do sector number check ? */
+	ide_cmd_lba48_transform(s, lba48);
+        s->status = READY_STAT | SEEK_STAT;
+        ide_set_irq(s->bus);
+        break;
 	case WIN_READ_EXT:
-	    lba48 = 1;
-        case WIN_READ:
-        case WIN_READ_ONCE:
-            if (!s->bs)
-                goto abort_cmd;
-	    ide_cmd_lba48_transform(s, lba48);
-            s->req_nb_sectors = 1;
-            ide_sector_read(s);
-            break;
+	lba48 = 1;
+    case WIN_READ:
+    case WIN_READ_ONCE:
+        if (!s->bs)
+            goto abort_cmd;
+	ide_cmd_lba48_transform(s, lba48);
+        s->req_nb_sectors = 1;
+        ide_sector_read(s);
+        break;
 	case WIN_WRITE_EXT:
-	    lba48 = 1;
-        case WIN_WRITE:
-        case WIN_WRITE_ONCE:
-        case CFA_WRITE_SECT_WO_ERASE:
-        case WIN_WRITE_VERIFY:
-	    ide_cmd_lba48_transform(s, lba48);
-            s->error = 0;
-            s->status = SEEK_STAT | READY_STAT;
-            s->req_nb_sectors = 1;
-            ide_transfer_start(s, s->io_buffer, 512, ide_sector_write);
-            s->media_changed = 1;
-            break;
+	lba48 = 1;
+    case WIN_WRITE:
+    case WIN_WRITE_ONCE:
+    case CFA_WRITE_SECT_WO_ERASE:
+    case WIN_WRITE_VERIFY:
+	ide_cmd_lba48_transform(s, lba48);
+        s->error = 0;
+        s->status = SEEK_STAT | READY_STAT;
+        s->req_nb_sectors = 1;
+        ide_transfer_start(s, s->io_buffer, 512, ide_sector_write);
+        s->media_changed = 1;
+        break;
 	case WIN_MULTREAD_EXT:
-	    lba48 = 1;
-        case WIN_MULTREAD:
-            if (!s->mult_sectors)
-                goto abort_cmd;
-	    ide_cmd_lba48_transform(s, lba48);
-            s->req_nb_sectors = s->mult_sectors;
-            ide_sector_read(s);
-            break;
-        case WIN_MULTWRITE_EXT:
-	    lba48 = 1;
-        case WIN_MULTWRITE:
-        case CFA_WRITE_MULTI_WO_ERASE:
-            if (!s->mult_sectors)
-                goto abort_cmd;
-	    ide_cmd_lba48_transform(s, lba48);
-            s->error = 0;
-            s->status = SEEK_STAT | READY_STAT;
-            s->req_nb_sectors = s->mult_sectors;
-            n = s->nsector;
-            if (n > s->req_nb_sectors)
-                n = s->req_nb_sectors;
-            ide_transfer_start(s, s->io_buffer, 512 * n, ide_sector_write);
-            s->media_changed = 1;
-            break;
+	lba48 = 1;
+    case WIN_MULTREAD:
+        if (!s->mult_sectors)
+            goto abort_cmd;
+	ide_cmd_lba48_transform(s, lba48);
+        s->req_nb_sectors = s->mult_sectors;
+        ide_sector_read(s);
+        break;
+    case WIN_MULTWRITE_EXT:
+	lba48 = 1;
+    case WIN_MULTWRITE:
+    case CFA_WRITE_MULTI_WO_ERASE:
+        if (!s->mult_sectors)
+            goto abort_cmd;
+	ide_cmd_lba48_transform(s, lba48);
+        s->error = 0;
+        s->status = SEEK_STAT | READY_STAT;
+        s->req_nb_sectors = s->mult_sectors;
+        n = s->nsector;
+        if (n > s->req_nb_sectors)
+            n = s->req_nb_sectors;
+        ide_transfer_start(s, s->io_buffer, 512 * n, ide_sector_write);
+        s->media_changed = 1;
+        break;
 	case WIN_READDMA_EXT:
-	    lba48 = 1;
-        case WIN_READDMA:
-        case WIN_READDMA_ONCE:
-            if (!s->bs)
-                goto abort_cmd;
-	    ide_cmd_lba48_transform(s, lba48);
-            ide_sector_read_dma(s);
-            break;
+	lba48 = 1;
+    case WIN_READDMA:
+    case WIN_READDMA_ONCE:
+        if (!s->bs)
+            goto abort_cmd;
+	ide_cmd_lba48_transform(s, lba48);
+        ide_sector_read_dma(s);
+        break;
 	case WIN_WRITEDMA_EXT:
-	    lba48 = 1;
-        case WIN_WRITEDMA:
-        case WIN_WRITEDMA_ONCE:
-            if (!s->bs)
-                goto abort_cmd;
-	    ide_cmd_lba48_transform(s, lba48);
-            ide_sector_write_dma(s);
-            s->media_changed = 1;
-            break;
-        case WIN_READ_NATIVE_MAX_EXT:
-	    lba48 = 1;
-        case WIN_READ_NATIVE_MAX:
-	    ide_cmd_lba48_transform(s, lba48);
-            ide_set_sector(s, s->nb_sectors - 1);
-            s->status = READY_STAT | SEEK_STAT;
-            ide_set_irq(s->bus);
-            break;
-        case WIN_CHECKPOWERMODE1:
-        case WIN_CHECKPOWERMODE2:
-            s->nsector = 0xff; /* device active or idle */
+	lba48 = 1;
+    case WIN_WRITEDMA:
+    case WIN_WRITEDMA_ONCE:
+        if (!s->bs)
+            goto abort_cmd;
+	ide_cmd_lba48_transform(s, lba48);
+        ide_sector_write_dma(s);
+        s->media_changed = 1;
+        break;
+    case WIN_READ_NATIVE_MAX_EXT:
+	lba48 = 1;
+    case WIN_READ_NATIVE_MAX:
+	ide_cmd_lba48_transform(s, lba48);
+        ide_set_sector(s, s->nb_sectors - 1);
+        s->status = READY_STAT | SEEK_STAT;
+        ide_set_irq(s->bus);
+        break;
+    case WIN_CHECKPOWERMODE1:
+    case WIN_CHECKPOWERMODE2:
+        s->nsector = 0xff; /* device active or idle */
+        s->status = READY_STAT | SEEK_STAT;
+        ide_set_irq(s->bus);
+        break;
+    case WIN_SETFEATURES:
+        if (!s->bs)
+            goto abort_cmd;
+        /* XXX: valid for CDROM ? */
+        switch(s->feature) {
+        case 0xcc: /* reverting to power-on defaults enable */
+        case 0x66: /* reverting to power-on defaults disable */
+        case 0x02: /* write cache enable */
+        case 0x82: /* write cache disable */
+        case 0xaa: /* read look-ahead enable */
+        case 0x55: /* read look-ahead disable */
+        case 0x05: /* set advanced power management mode */
+        case 0x85: /* disable advanced power management mode */
+        case 0x69: /* NOP */
+        case 0x67: /* NOP */
+        case 0x96: /* NOP */
+        case 0x9a: /* NOP */
+        case 0x42: /* enable Automatic Acoustic Mode */
+        case 0xc2: /* disable Automatic Acoustic Mode */
             s->status = READY_STAT | SEEK_STAT;
             ide_set_irq(s->bus);
             break;
-        case WIN_SETFEATURES:
-            if (!s->bs)
-                goto abort_cmd;
-            /* XXX: valid for CDROM ? */
-            switch(s->feature) {
-            case 0xcc: /* reverting to power-on defaults enable */
-            case 0x66: /* reverting to power-on defaults disable */
-            case 0x02: /* write cache enable */
-            case 0x82: /* write cache disable */
-            case 0xaa: /* read look-ahead enable */
-            case 0x55: /* read look-ahead disable */
-            case 0x05: /* set advanced power management mode */
-            case 0x85: /* disable advanced power management mode */
-            case 0x69: /* NOP */
-            case 0x67: /* NOP */
-            case 0x96: /* NOP */
-            case 0x9a: /* NOP */
-            case 0x42: /* enable Automatic Acoustic Mode */
-            case 0xc2: /* disable Automatic Acoustic Mode */
-                s->status = READY_STAT | SEEK_STAT;
-                ide_set_irq(s->bus);
-                break;
-            case 0x03: { /* set transfer mode */
+        case 0x03: { /* set transfer mode */
 		uint8_t val = s->nsector & 0x07;
-                uint16_t *identify_data = (uint16_t *)s->identify_data;
+            uint16_t *identify_data = (uint16_t *)s->identify_data;
 
 		switch (s->nsector >> 3) {
-		    case 0x00: /* pio default */
-		    case 0x01: /* pio mode */
+		case 0x00: /* pio default */
+		case 0x01: /* pio mode */
 			put_le16(identify_data + 62,0x07);
 			put_le16(identify_data + 63,0x07);
 			put_le16(identify_data + 88,0x3f);
 			break;
-                    case 0x02: /* sigle word dma mode*/
+                case 0x02: /* sigle word dma mode*/
 			put_le16(identify_data + 62,0x07 | (1 << (val + 8)));
 			put_le16(identify_data + 63,0x07);
 			put_le16(identify_data + 88,0x3f);
 			break;
-		    case 0x04: /* mdma mode */
+		case 0x04: /* mdma mode */
 			put_le16(identify_data + 62,0x07);
 			put_le16(identify_data + 63,0x07 | (1 << (val + 8)));
 			put_le16(identify_data + 88,0x3f);
 			break;
-		    case 0x08: /* udma mode */
+		case 0x08: /* udma mode */
 			put_le16(identify_data + 62,0x07);
 			put_le16(identify_data + 63,0x07);
 			put_le16(identify_data + 88,0x3f | (1 << (val + 8)));
 			break;
-		    default:
+		default:
 			goto abort_cmd;
 		}
-                s->status = READY_STAT | SEEK_STAT;
-                ide_set_irq(s->bus);
-                break;
-	    }
-            default:
-                goto abort_cmd;
-            }
-            break;
-        case WIN_FLUSH_CACHE:
-        case WIN_FLUSH_CACHE_EXT:
-            ide_flush_cache(s);
-            break;
-        case WIN_STANDBY:
-        case WIN_STANDBY2:
-        case WIN_STANDBYNOW1:
-        case WIN_STANDBYNOW2:
-        case WIN_IDLEIMMEDIATE:
-        case CFA_IDLEIMMEDIATE:
-        case WIN_SETIDLE1:
-        case WIN_SETIDLE2:
-        case WIN_SLEEPNOW1:
-        case WIN_SLEEPNOW2:
-            s->status = READY_STAT;
-            ide_set_irq(s->bus);
-            break;
-        case WIN_SEEK:
-            if(s->drive_kind == IDE_CD)
-                goto abort_cmd;
-            /* XXX: Check that seek is within bounds */
             s->status = READY_STAT | SEEK_STAT;
             ide_set_irq(s->bus);
             break;
-            /* ATAPI commands */
-        case WIN_PIDENTIFY:
-            if (s->drive_kind == IDE_CD) {
-                ide_atapi_identify(s);
-                s->status = READY_STAT | SEEK_STAT;
-                ide_transfer_start(s, s->io_buffer, 512, ide_transfer_stop);
-            } else {
-                ide_abort_command(s);
-            }
-            ide_set_irq(s->bus);
-            break;
-        case WIN_DIAGNOSE:
-            ide_set_signature(s);
-            if (s->drive_kind == IDE_CD)
-                s->status = 0; /* ATAPI spec (v6) section 9.10 defines packet
-                                * devices to return a clear status register
-                                * with READY_STAT *not* set. */
-            else
-                s->status = READY_STAT | SEEK_STAT;
-            s->error = 0x01; /* Device 0 passed, Device 1 passed or not
-                              * present. 
-                              */
-            ide_set_irq(s->bus);
-            break;
-        case WIN_SRST:
-            if (s->drive_kind != IDE_CD)
-                goto abort_cmd;
-            ide_set_signature(s);
-            s->status = 0x00; /* NOTE: READY is _not_ set */
-            s->error = 0x01;
-            break;
-        case WIN_PACKETCMD:
-            if (s->drive_kind != IDE_CD)
-                goto abort_cmd;
-            /* overlapping commands not supported */
-            if (s->feature & 0x02)
-                goto abort_cmd;
+	}
+        default:
+            goto abort_cmd;
+        }
+        break;
+    case WIN_FLUSH_CACHE:
+    case WIN_FLUSH_CACHE_EXT:
+        ide_flush_cache(s);
+        break;
+    case WIN_STANDBY:
+    case WIN_STANDBY2:
+    case WIN_STANDBYNOW1:
+    case WIN_STANDBYNOW2:
+    case WIN_IDLEIMMEDIATE:
+    case CFA_IDLEIMMEDIATE:
+    case WIN_SETIDLE1:
+    case WIN_SETIDLE2:
+    case WIN_SLEEPNOW1:
+    case WIN_SLEEPNOW2:
+        s->status = READY_STAT;
+        ide_set_irq(s->bus);
+        break;
+    case WIN_SEEK:
+        if(s->drive_kind == IDE_CD)
+            goto abort_cmd;
+        /* XXX: Check that seek is within bounds */
+        s->status = READY_STAT | SEEK_STAT;
+        ide_set_irq(s->bus);
+        break;
+        /* ATAPI commands */
+    case WIN_PIDENTIFY:
+        if (s->drive_kind == IDE_CD) {
+            ide_atapi_identify(s);
             s->status = READY_STAT | SEEK_STAT;
-            s->atapi_dma = s->feature & 1;
-            s->nsector = 1;
-            ide_transfer_start(s, s->io_buffer, ATAPI_PACKET_SIZE,
-                               ide_atapi_cmd);
-            break;
-        /* CF-ATA commands */
-        case CFA_REQ_EXT_ERROR_CODE:
-            if (s->drive_kind != IDE_CFATA)
-                goto abort_cmd;
-            s->error = 0x09;    /* miscellaneous error */
+            ide_transfer_start(s, s->io_buffer, 512, ide_transfer_stop);
+        } else {
+            ide_abort_command(s);
+        }
+        ide_set_irq(s->bus);
+        break;
+    case WIN_DIAGNOSE:
+        ide_set_signature(s);
+        if (s->drive_kind == IDE_CD)
+            s->status = 0; /* ATAPI spec (v6) section 9.10 defines packet
+                            * devices to return a clear status register
+                            * with READY_STAT *not* set. */
+        else
             s->status = READY_STAT | SEEK_STAT;
-            ide_set_irq(s->bus);
+        s->error = 0x01; /* Device 0 passed, Device 1 passed or not
+                          * present. 
+                          */
+        ide_set_irq(s->bus);
+        break;
+    case WIN_SRST:
+        if (s->drive_kind != IDE_CD)
+            goto abort_cmd;
+        ide_set_signature(s);
+        s->status = 0x00; /* NOTE: READY is _not_ set */
+        s->error = 0x01;
+        break;
+    case WIN_PACKETCMD:
+        if (s->drive_kind != IDE_CD)
+            goto abort_cmd;
+        /* overlapping commands not supported */
+        if (s->feature & 0x02)
+            goto abort_cmd;
+        s->status = READY_STAT | SEEK_STAT;
+        s->atapi_dma = s->feature & 1;
+        s->nsector = 1;
+        ide_transfer_start(s, s->io_buffer, ATAPI_PACKET_SIZE,
+                           ide_atapi_cmd);
+        break;
+    /* CF-ATA commands */
+    case CFA_REQ_EXT_ERROR_CODE:
+        if (s->drive_kind != IDE_CFATA)
+            goto abort_cmd;
+        s->error = 0x09;    /* miscellaneous error */
+        s->status = READY_STAT | SEEK_STAT;
+        ide_set_irq(s->bus);
+        break;
+    case CFA_ERASE_SECTORS:
+    case CFA_WEAR_LEVEL:
+        if (s->drive_kind != IDE_CFATA)
+            goto abort_cmd;
+        if (val == CFA_WEAR_LEVEL)
+            s->nsector = 0;
+        if (val == CFA_ERASE_SECTORS)
+            s->media_changed = 1;
+        s->error = 0x00;
+        s->status = READY_STAT | SEEK_STAT;
+        ide_set_irq(s->bus);
+        break;
+    case CFA_TRANSLATE_SECTOR:
+        if (s->drive_kind != IDE_CFATA)
+            goto abort_cmd;
+        s->error = 0x00;
+        s->status = READY_STAT | SEEK_STAT;
+        memset(s->io_buffer, 0, 0x200);
+        s->io_buffer[0x00] = s->hcyl;			/* Cyl MSB */
+        s->io_buffer[0x01] = s->lcyl;			/* Cyl LSB */
+        s->io_buffer[0x02] = s->select;			/* Head */
+        s->io_buffer[0x03] = s->sector;			/* Sector */
+        s->io_buffer[0x04] = ide_get_sector(s) >> 16;	/* LBA MSB */
+        s->io_buffer[0x05] = ide_get_sector(s) >> 8;	/* LBA */
+        s->io_buffer[0x06] = ide_get_sector(s) >> 0;	/* LBA LSB */
+        s->io_buffer[0x13] = 0x00;				/* Erase flag */
+        s->io_buffer[0x18] = 0x00;				/* Hot count */
+        s->io_buffer[0x19] = 0x00;				/* Hot count */
+        s->io_buffer[0x1a] = 0x01;				/* Hot count */
+        ide_transfer_start(s, s->io_buffer, 0x200, ide_transfer_stop);
+        ide_set_irq(s->bus);
+        break;
+    case CFA_ACCESS_METADATA_STORAGE:
+        if (s->drive_kind != IDE_CFATA)
+            goto abort_cmd;
+        switch (s->feature) {
+        case 0x02:	/* Inquiry Metadata Storage */
+            ide_cfata_metadata_inquiry(s);
             break;
-        case CFA_ERASE_SECTORS:
-        case CFA_WEAR_LEVEL:
-            if (s->drive_kind != IDE_CFATA)
-                goto abort_cmd;
-            if (val == CFA_WEAR_LEVEL)
-                s->nsector = 0;
-            if (val == CFA_ERASE_SECTORS)
-                s->media_changed = 1;
-            s->error = 0x00;
-            s->status = READY_STAT | SEEK_STAT;
-            ide_set_irq(s->bus);
+        case 0x03:	/* Read Metadata Storage */
+            ide_cfata_metadata_read(s);
             break;
-        case CFA_TRANSLATE_SECTOR:
-            if (s->drive_kind != IDE_CFATA)
-                goto abort_cmd;
-            s->error = 0x00;
-            s->status = READY_STAT | SEEK_STAT;
-            memset(s->io_buffer, 0, 0x200);
-            s->io_buffer[0x00] = s->hcyl;			/* Cyl MSB */
-            s->io_buffer[0x01] = s->lcyl;			/* Cyl LSB */
-            s->io_buffer[0x02] = s->select;			/* Head */
-            s->io_buffer[0x03] = s->sector;			/* Sector */
-            s->io_buffer[0x04] = ide_get_sector(s) >> 16;	/* LBA MSB */
-            s->io_buffer[0x05] = ide_get_sector(s) >> 8;	/* LBA */
-            s->io_buffer[0x06] = ide_get_sector(s) >> 0;	/* LBA LSB */
-            s->io_buffer[0x13] = 0x00;				/* Erase flag */
-            s->io_buffer[0x18] = 0x00;				/* Hot count */
-            s->io_buffer[0x19] = 0x00;				/* Hot count */
-            s->io_buffer[0x1a] = 0x01;				/* Hot count */
-            ide_transfer_start(s, s->io_buffer, 0x200, ide_transfer_stop);
-            ide_set_irq(s->bus);
+        case 0x04:	/* Write Metadata Storage */
+            ide_cfata_metadata_write(s);
             break;
-        case CFA_ACCESS_METADATA_STORAGE:
-            if (s->drive_kind != IDE_CFATA)
-                goto abort_cmd;
-            switch (s->feature) {
-            case 0x02:	/* Inquiry Metadata Storage */
-                ide_cfata_metadata_inquiry(s);
-                break;
-            case 0x03:	/* Read Metadata Storage */
-                ide_cfata_metadata_read(s);
-                break;
-            case 0x04:	/* Write Metadata Storage */
-                ide_cfata_metadata_write(s);
-                break;
-            default:
-                goto abort_cmd;
-            }
-            ide_transfer_start(s, s->io_buffer, 0x200, ide_transfer_stop);
-            s->status = 0x00; /* NOTE: READY is _not_ set */
-            ide_set_irq(s->bus);
-            break;
-        case IBM_SENSE_CONDITION:
-            if (s->drive_kind != IDE_CFATA)
-                goto abort_cmd;
-            switch (s->feature) {
-            case 0x01:  /* sense temperature in device */
-                s->nsector = 0x50;      /* +20 C */
-                break;
-            default:
-                goto abort_cmd;
-            }
-            s->status = READY_STAT | SEEK_STAT;
-            ide_set_irq(s->bus);
+        default:
+            goto abort_cmd;
+        }
+        ide_transfer_start(s, s->io_buffer, 0x200, ide_transfer_stop);
+        s->status = 0x00; /* NOTE: READY is _not_ set */
+        ide_set_irq(s->bus);
+        break;
+    case IBM_SENSE_CONDITION:
+        if (s->drive_kind != IDE_CFATA)
+            goto abort_cmd;
+        switch (s->feature) {
+        case 0x01:  /* sense temperature in device */
+            s->nsector = 0x50;      /* +20 C */
             break;
+        default:
+            goto abort_cmd;
+        }
+        s->status = READY_STAT | SEEK_STAT;
+        ide_set_irq(s->bus);
+        break;
 
 	case WIN_SMART:
-	    if (s->drive_kind == IDE_CD)
+	if (s->drive_kind == IDE_CD)
 		goto abort_cmd;
-	    if (s->hcyl != 0xc2 || s->lcyl != 0x4f)
+	if (s->hcyl != 0xc2 || s->lcyl != 0x4f)
 		goto abort_cmd;
-	    if (!s->smart_enabled && s->feature != SMART_ENABLE)
+	if (!s->smart_enabled && s->feature != SMART_ENABLE)
 		goto abort_cmd;
-	    switch (s->feature) {
-	    case SMART_DISABLE:
+	switch (s->feature) {
+	case SMART_DISABLE:
 		s->smart_enabled = 0;
 		s->status = READY_STAT | SEEK_STAT;
 		ide_set_irq(s->bus);
 		break;
-	    case SMART_ENABLE:
+	case SMART_ENABLE:
 		s->smart_enabled = 1;
 		s->status = READY_STAT | SEEK_STAT;
 		ide_set_irq(s->bus);
 		break;
-	    case SMART_ATTR_AUTOSAVE:
+	case SMART_ATTR_AUTOSAVE:
 		switch (s->sector) {
 		case 0x00:
-		    s->smart_autosave = 0;
-		    break;
+		s->smart_autosave = 0;
+		break;
 		case 0xf1:
-		    s->smart_autosave = 1;
-		    break;
+		s->smart_autosave = 1;
+		break;
 		default:
-		    goto abort_cmd;
+		goto abort_cmd;
 		}
 		s->status = READY_STAT | SEEK_STAT;
 		ide_set_irq(s->bus);
 		break;
-	    case SMART_STATUS:
+	case SMART_STATUS:
 		if (!s->smart_errors) {
-		    s->hcyl = 0xc2;
-		    s->lcyl = 0x4f;
+		s->hcyl = 0xc2;
+		s->lcyl = 0x4f;
 		} else {
-		    s->hcyl = 0x2c;
-		    s->lcyl = 0xf4;
+		s->hcyl = 0x2c;
+		s->lcyl = 0xf4;
 		}
 		s->status = READY_STAT | SEEK_STAT;
 		ide_set_irq(s->bus);
 		break;
-	    case SMART_READ_THRESH:
+	case SMART_READ_THRESH:
 		memset(s->io_buffer, 0, 0x200);
 		s->io_buffer[0] = 0x01; /* smart struct version */
 		for (n=0; n<30; n++) {
-		    if (smart_attributes[n][0] == 0)
+		if (smart_attributes[n][0] == 0)
 			break;
-		    s->io_buffer[2+0+(n*12)] = smart_attributes[n][0];
-		    s->io_buffer[2+1+(n*12)] = smart_attributes[n][4];
+		s->io_buffer[2+0+(n*12)] = smart_attributes[n][0];
+		s->io_buffer[2+1+(n*12)] = smart_attributes[n][4];
 		}
 		for (n=0; n<511; n++) /* checksum */
-		    s->io_buffer[511] += s->io_buffer[n];
+		s->io_buffer[511] += s->io_buffer[n];
 		s->io_buffer[511] = 0x100 - s->io_buffer[511];
 		s->status = READY_STAT | SEEK_STAT;
 		ide_transfer_start(s, s->io_buffer, 0x200, ide_transfer_stop);
 		ide_set_irq(s->bus);
 		break;
-	    case SMART_READ_DATA:
+	case SMART_READ_DATA:
 		memset(s->io_buffer, 0, 0x200);
 		s->io_buffer[0] = 0x01; /* smart struct version */
 		for (n=0; n<30; n++) {
-		    if (smart_attributes[n][0] == 0)
+		if (smart_attributes[n][0] == 0)
 			break;
-		    s->io_buffer[2+0+(n*12)] = smart_attributes[n][0];
-		    s->io_buffer[2+1+(n*12)] = smart_attributes[n][1];
-		    s->io_buffer[2+3+(n*12)] = smart_attributes[n][2];
-		    s->io_buffer[2+4+(n*12)] = smart_attributes[n][3];
+		s->io_buffer[2+0+(n*12)] = smart_attributes[n][0];
+		s->io_buffer[2+1+(n*12)] = smart_attributes[n][1];
+		s->io_buffer[2+3+(n*12)] = smart_attributes[n][2];
+		s->io_buffer[2+4+(n*12)] = smart_attributes[n][3];
 		}
 		s->io_buffer[362] = 0x02 | (s->smart_autosave?0x80:0x00);
 		if (s->smart_selftest_count == 0) {
-		    s->io_buffer[363] = 0;
+		s->io_buffer[363] = 0;
 		} else {
-		    s->io_buffer[363] = 
+		s->io_buffer[363] = 
 			s->smart_selftest_data[3 + 
-					       (s->smart_selftest_count - 1) * 
-					       24];
+					   (s->smart_selftest_count - 1) * 
+					   24];
 		}
 		s->io_buffer[364] = 0x20; 
 		s->io_buffer[365] = 0x01; 
@@ -2294,76 +2294,76 @@  void ide_exec_cmd(IDEBus *bus, uint32_t val)
 		s->io_buffer[374] = 0x01; /* minutes for poll conveyance */
 
 		for (n=0; n<511; n++) 
-		    s->io_buffer[511] += s->io_buffer[n];
+		s->io_buffer[511] += s->io_buffer[n];
 		s->io_buffer[511] = 0x100 - s->io_buffer[511];
 		s->status = READY_STAT | SEEK_STAT;
 		ide_transfer_start(s, s->io_buffer, 0x200, ide_transfer_stop);
 		ide_set_irq(s->bus);
 		break;
-	    case SMART_READ_LOG:
+	case SMART_READ_LOG:
 		switch (s->sector) {
 		case 0x01: /* summary smart error log */
-		    memset(s->io_buffer, 0, 0x200);
-		    s->io_buffer[0] = 0x01;
-		    s->io_buffer[1] = 0x00; /* no error entries */
-		    s->io_buffer[452] = s->smart_errors & 0xff;
-		    s->io_buffer[453] = (s->smart_errors & 0xff00) >> 8;
+		memset(s->io_buffer, 0, 0x200);
+		s->io_buffer[0] = 0x01;
+		s->io_buffer[1] = 0x00; /* no error entries */
+		s->io_buffer[452] = s->smart_errors & 0xff;
+		s->io_buffer[453] = (s->smart_errors & 0xff00) >> 8;
 
-		    for (n=0; n<511; n++)
+		for (n=0; n<511; n++)
 			s->io_buffer[511] += s->io_buffer[n];
-		    s->io_buffer[511] = 0x100 - s->io_buffer[511];
-		    break;
+		s->io_buffer[511] = 0x100 - s->io_buffer[511];
+		break;
 		case 0x06: /* smart self test log */
-		    memset(s->io_buffer, 0, 0x200);
-		    s->io_buffer[0] = 0x01; 
-		    if (s->smart_selftest_count == 0) {
+		memset(s->io_buffer, 0, 0x200);
+		s->io_buffer[0] = 0x01; 
+		if (s->smart_selftest_count == 0) {
 			s->io_buffer[508] = 0;
-		    } else {
+		} else {
 			s->io_buffer[508] = s->smart_selftest_count;
 			for (n=2; n<506; n++) 
-			    s->io_buffer[n] = s->smart_selftest_data[n];
-		    }		    
-		    for (n=0; n<511; n++)
+			s->io_buffer[n] = s->smart_selftest_data[n];
+		}		    
+		for (n=0; n<511; n++)
 			s->io_buffer[511] += s->io_buffer[n];
-		    s->io_buffer[511] = 0x100 - s->io_buffer[511];
-		    break;
+		s->io_buffer[511] = 0x100 - s->io_buffer[511];
+		break;
 		default:
-		    goto abort_cmd;
+		goto abort_cmd;
 		}
 		s->status = READY_STAT | SEEK_STAT;
 		ide_transfer_start(s, s->io_buffer, 0x200, ide_transfer_stop);
 		ide_set_irq(s->bus);
 		break;
-	    case SMART_EXECUTE_OFFLINE:
+	case SMART_EXECUTE_OFFLINE:
 		switch (s->sector) {
 		case 0: /* off-line routine */
 		case 1: /* short self test */
 		case 2: /* extended self test */
-		    s->smart_selftest_count++;
-		    if(s->smart_selftest_count > 21)
+		s->smart_selftest_count++;
+		if(s->smart_selftest_count > 21)
 			s->smart_selftest_count = 0;
-		    n = 2 + (s->smart_selftest_count - 1) * 24;
-		    s->smart_selftest_data[n] = s->sector;
-		    s->smart_selftest_data[n+1] = 0x00; /* OK and finished */
-		    s->smart_selftest_data[n+2] = 0x34; /* hour count lsb */
-		    s->smart_selftest_data[n+3] = 0x12; /* hour count msb */
-		    s->status = READY_STAT | SEEK_STAT;
-		    ide_set_irq(s->bus);
-		    break;
+		n = 2 + (s->smart_selftest_count - 1) * 24;
+		s->smart_selftest_data[n] = s->sector;
+		s->smart_selftest_data[n+1] = 0x00; /* OK and finished */
+		s->smart_selftest_data[n+2] = 0x34; /* hour count lsb */
+		s->smart_selftest_data[n+3] = 0x12; /* hour count msb */
+		s->status = READY_STAT | SEEK_STAT;
+		ide_set_irq(s->bus);
+		break;
 		default:
-		    goto abort_cmd;
+		goto abort_cmd;
 		}
 		break;
-	    default:
+	default:
 		goto abort_cmd;
-	    }
-	    break;
-        default:
-        abort_cmd:
-            ide_abort_command(s);
-            ide_set_irq(s->bus);
-            break;
-        }
+	}
+	break;
+    default:
+    abort_cmd:
+        ide_abort_command(s);
+        ide_set_irq(s->bus);
+        break;
+    }
 }
 
 uint32_t ide_ioport_read(void *opaque, uint32_t addr1)