@@ -6969,6 +6969,8 @@ build_lswitch_arp_nd_responder_known_ips(struct ovn_port *op,
struct ds *match)
{
if (op->nbsp) {
+ const char *arp_proxy;
+
if (!strcmp(op->nbsp->type, "virtual")) {
/* Handle
* - GARPs for virtual ip which belongs to a logical port
@@ -7126,6 +7128,52 @@ build_lswitch_arp_nd_responder_known_ips(struct ovn_port *op,
}
}
}
+
+ /*
+ * Add responses for ARP proxies.
+ */
+ arp_proxy = smap_get(&op->nbsp->options,"arp_proxy");
+
+ if (arp_proxy && op->peer) {
+ struct lport_addresses proxy_arp_addrs;
+ int i = 0;
+
+ if (extract_ip_addresses(arp_proxy, &proxy_arp_addrs)) {
+ /*
+ * Match rule on all proxy ARP IPs.
+ */
+ ds_clear(match);
+ ds_put_cstr(match, "arp.op == 1 && (");
+
+ for (i = 0; i < proxy_arp_addrs.n_ipv4_addrs; i++) {
+ if (i > 0) {
+ ds_put_cstr(match, " || ");
+ }
+ ds_put_format(match, "arp.tpa == %s",
+ proxy_arp_addrs.ipv4_addrs[i].addr_s);
+ }
+
+ ds_put_cstr(match, ")");
+ destroy_lport_addresses(&proxy_arp_addrs);
+
+ ds_clear(actions);
+ ds_put_format(actions,
+ "eth.dst = eth.src; "
+ "eth.src = %s; "
+ "arp.op = 2; /* ARP reply */ "
+ "arp.tha = arp.sha; "
+ "arp.sha = %s; "
+ "arp.tpa <-> arp.spa; "
+ "outport = inport; "
+ "flags.loopback = 1; "
+ "output;",
+ op->peer->lrp_networks.ea_s,
+ op->peer->lrp_networks.ea_s);
+
+ ovn_lflow_add_with_hint(lflows, op->od, S_SWITCH_IN_ARP_ND_RSP,
+ 50, ds_cstr(match), ds_cstr(actions), &op->nbsp->header_);
+ }
+ }
}
}
@@ -848,6 +848,15 @@
</dd>
</dl>
</column>
+
+ <column name="options" key="arp_proxy">
+ Optional. A list IPv4 addresses that this
+ logical switch <code>router</code> port will reply to ARP requests.
+ Example: <code>169.254.239.254 169.254.239.2</code>. The
+ <ref column="options" key="router-port"/>'s logical router should
+ have a route to forward packets sent to configured proxy ARP IPs to
+ an appropriate destination.
+ </column>
</group>
<group title="Options for localnet ports">
@@ -26899,3 +26899,106 @@ AT_CHECK([ovs-ofctl dump-flows br-int "nw_src=10.0.0.0/24" | \
OVN_CLEANUP([hv1])
AT_CLEANUP
])
+
+OVN_FOR_EACH_NORTHD([
+AT_SETUP([ovn -- proxy-arp: 1 HVs, 1 LSs, 1 lport/LS, 1 LR])
+AT_KEYWORDS([proxy-arp])
+ovn_start
+
+# Logical network:
+# One LR - lr1 has switch ls1 (192.16.1.0/24) connected to it,
+# and and one HV with IP 192.16.1.6.
+
+ovn-nbctl lr-add lr1
+ovn-nbctl ls-add ls1
+
+# Connect ls1 to lr1
+ovn-nbctl lrp-add lr1 ls1 00:00:00:01:02:f1 192.16.1.1/24
+ovn-nbctl lsp-add ls1 rp-ls1 -- set Logical_Switch_Port rp-ls1 \
+ type=router options:router-port=ls1 addresses=\"00:00:00:01:02:f1\"
+
+# Create logical port ls1-lp1 in ls1
+ovn-nbctl lsp-add ls1 ls1-lp1 \
+-- lsp-set-addresses ls1-lp1 "00:00:00:01:02:03 192.16.1.6"
+
+
+# Create one hypervisor and create OVS ports corresponding to logical ports.
+net_add n1
+
+sim_add pa-hv
+as pa-hv
+ovs-vsctl add-br br-phys
+ovn_attach n1 br-phys 192.16.0.1
+
+# Note: tx/rx are with respect to the LS port, so
+# tx on switch port is HV rx, etc.
+ovs-vsctl -- add-port br-int vif1 -- \
+ set interface vif1 external-ids:iface-id=ls1-lp1 \
+ options:tx_pcap=pa-hv/vif1-tx.pcap \
+ options:rxq_pcap=pa-hv/vif1-rx.pcap \
+ ofport-request=1
+
+# And proxy ARP flows for 69.254.239.254 and 169.254.239.2
+# and check that SB flows have been added.
+ovn-nbctl --wait=hv add Logical_Switch_Port rp-ls1 \
+options arp_proxy='"169.254.239.254 169.254.239.2"'
+ovn-sbctl dump-flows > sbflows
+AT_CAPTURE_FILE([sbflows])
+
+AT_CHECK([ovn-sbctl dump-flows | grep ls_in_arp_rsp | grep "169.254.239.2" | wc -l], [0], [dnl
+1
+])
+
+# Remove and check that the flows have been removed
+ovn-nbctl --wait=hv remove Logical_Switch_Port rp-ls1 options arp_proxy='"169.254.239.254 169.254.239.2"'
+
+AT_CHECK([ovn-sbctl dump-flows | grep ls_in_arp_rsp | grep "169.254.239.2" | wc -l], [0], [dnl
+0
+])
+
+# Add the flows back send arp request and check we see an ARP response
+ovn-nbctl --wait=hv add Logical_Switch_Port rp-ls1 \
+options arp_proxy='"169.254.239.254 169.254.239.2"'
+
+ls1_p1_mac=00:00:00:01:02:03
+ls1_p1_ip=192.16.1.6
+
+ls1_ro_mac=00:00:00:01:02:f1
+ls1_ro_ip=192.168.1.1
+
+proxy_ip1=169.254.239.254
+proxy_ip2=169.254.239.2
+
+bcast_mac=ff:ff:ff:ff:ff:ff
+
+# Send ARP request for 169.254.239.254
+packet="inport==\"ls1-lp1\" && eth.src==$ls1_p1_mac && eth.dst==$bcast_mac &&
+ arp.op==1 && arp.sha==$ls1_p1_mac && arp.spa==$ls1_p1_ip &&
+ arp.tha==$bcast_mac && arp.tpa==$proxy_ip1"
+
+as pa-hv ovs-appctl -t ovn-controller inject-pkt "$packet"
+
+ovs-ofctl dump-flows br-int| grep 169.254.239.254 | grep priority=50 > debug1
+AT_CAPTURE_FILE([debug1])
+
+
+# Check if packet hit the ARP reply ovs flow
+AT_CHECK([ovs-ofctl dump-flows br-int | \
+ grep "169.254.239.254" | \
+ grep "priority=50" | \
+ grep "arp_op=1" | \
+ grep "n_packets=1" | wc -l], [0], [dnl
+1
+])
+
+# Check that the HV gets an ARP reply
+expected="eth.src==$ls1_ro_mac && eth.dst==$ls1_p1_mac &&
+ arp.op==2 && arp.sha==$ls1_ro_mac && arp.spa==$proxy_ip1 &&
+ arp.tha==$ls1_p1_mac && arp.tpa==$ls1_p1_ip"
+echo $expected | ovstest test-ovn expr-to-packets > expected
+
+OVN_CHECK_PACKETS([pa-hv/vif1-tx.pcap], [expected])
+
+OVN_CLEANUP([pa-hv])
+AT_CLEANUP
+])