@@ -882,6 +882,10 @@ wake_up_ovsdb() {
AT_CHECK([kill -CONT $(cat $1/ovsdb-server.pid)])
}
+trim_zeros() {
+ sed 's/\(00\)\{1,\}$//'
+}
+
OVS_END_SHELL_HELPERS
m4_define([OVN_POPULATE_ARP], [AT_CHECK(ovn_populate_arp__, [0], [ignore])])
@@ -7326,10 +7326,6 @@ check ovn-nbctl --wait=hv sync
# Start with 0 because the first request will not have NXT_RESUME
n_resume=0
-trim_zeros() {
- sed 's/\(00\)\{1,\}$//'
-}
-
# This shell function sends a DHCPv6 request packet
# test_dhcpv6 INPORT SRC_MAC SRC_LLA DHCPv6_MSG_TYPE OFFER_IP OUTPORT...
# The OUTPORTs (zero or more) list the VIFs on which the original DHCPv6
@@ -9049,10 +9045,6 @@ packet=${dst_mac}${src_mac}08004500001c0000000040110000${src_ip}${dst_ip}0035111
# Send IP packet destined to 8.8.8.8 from lsp1lp2
as hv1 ovs-appctl netdev-dummy/receive hv1-ls1lp2 $packet
-trim_zeros() {
- sed 's/\(00\)\{1,\}$//'
-}
-
# ARP packet should be received with Target IP Address set to 192.168.1.254 and
# not 8.8.8.8
@@ -9108,9 +9100,6 @@ AT_CAPTURE_FILE([sbflows])
# Wait for packet to be received.
OVS_WAIT_UNTIL([test `wc -c < "hv1/snoopvif-tx.pcap"` -ge 140])
-trim_zeros() {
- sed 's/\(00\)\{1,\}$//'
-}
$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros |sort | uniq > packets
AT_CHECK([sort packets], [0], [dnl
fffffffffffff0000000000108060001080006040001f00000000001c0a80001000000000000c0a80001
@@ -9307,9 +9296,6 @@ ovn-nbctl list logical_router_port lrp0
ovn-nbctl show
# Wait for packet to be received.
OVS_WAIT_UNTIL([test `wc -c < "hv1/snoopvif-tx.pcap"` -ge 50])
-trim_zeros() {
- sed 's/\(00\)\{1,\}$//'
-}
$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros | sort | uniq > packets
expected="fffffffffffff0000000000108060001080006040001f00000000001c0a80001000000000000c0a80001"
echo $expected > expout
@@ -9330,9 +9316,6 @@ ovn-nbctl lsp-set-options lrp0-rp router-port=lrp0 nat-addresses="router" exclud
# Wait for packets to be received.
OVS_WAIT_UNTIL([test `wc -c < "hv1/snoopvif-tx.pcap"` -ge 250])
-trim_zeros() {
- sed 's/\(00\)\{1,\}$//'
-}
$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros > packets
g0="fffffffffffff0000000000108060001080006040001f00000000001c0a80001000000000000c0a80001"
@@ -10751,10 +10734,6 @@ OVN_POPULATE_ARP
wait_for_ports_up
check ovn-nbctl --wait=hv sync
-trim_zeros() {
- sed 's/\(00\)\{1,\}$//'
-}
-
# Send ip packets between foo1 and bar1
# (East-west traffic should flow normally)
src_mac="f00000010203"
@@ -12187,9 +12166,6 @@ OVN_WAIT_PATCH_PORT_FLOWS(["ln_port"], ["hv2"])
# Wait for packets to be received.
OVS_WAIT_UNTIL([test `wc -c < "hv1/snoopvif-tx.pcap"` -ge 100])
-trim_zeros() {
- sed 's/\(00\)\{1,\}$//'
-}
$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv1/snoopvif-tx.pcap | trim_zeros > packets
expected="fffffffffffff0000000000108060001080006040001f00000000001c0a80001000000000000c0a80001"
echo $expected > expout
@@ -12221,10 +12197,6 @@ OVN_WAIT_PATCH_PORT_FLOWS(["ln_port"], ["hv3"])
# Re-add nat-addresses option
ovn-nbctl lsp-set-options lrp0-rp router-port=lrp0 nat-addresses="router"
-trim_zeros() {
- sed 's/\(00\)\{1,\}$//'
-}
-
garp_1="fffffffffffff0000000000308060001080006040001f00000000003c0a80003000000000000c0a80003"
echo $garp_1 > expected_out
garp_2="fffffffffffff0000000000408060001080006040001f00000000004c0a80004000000000000c0a80004"
@@ -13835,10 +13807,6 @@ as hv1 reset_pcap_file snoopvif hv1/snoopvif
# add nat-addresses option
ovn-nbctl --wait=hv lsp-set-options lrp0-rp router-port=lrp0 nat-addresses="router"
-trim_zeros() {
- sed 's/\(00\)\{1,\}$//'
-}
-
only_broadcast_from_lrp1() {
grep "fffffffffffff00000000001"
}
@@ -13869,10 +13837,6 @@ ovn-nbctl --wait=hv \
as hv3 reset_pcap_file br-phys_n1 hv3/br-phys_n1
as hv1 reset_pcap_file snoopvif hv1/snoopvif
-trim_zeros() {
- sed 's/\(00\)\{1,\}$//'
-}
-
OVN_CHECK_PACKETS_CONTAIN([hv1/snoopvif-tx.pcap], [expected_out], "trim_zeros")
OVN_CHECK_PACKETS_CONTAIN([hv3/br-phys_n1-tx.pcap], [expected_out], "trim_zeros")
$PYTHON "$ovs_srcdir/utilities/ovs-pcap.in" hv2/br-phys_n1-tx.pcap | trim_zeros | only_broadcast_from_lrp1 | uniq > hv2_br_phys_tx
@@ -13907,10 +13871,6 @@ ovn-nbctl --wait=hv lsp-set-options lrp0-rp router-port=lrp0 nat-addresses="rout
OVS_WAIT_UNTIL([test 1 = `ovn-sbctl --bare --columns nat_addresses find port_binding \
logical_port=lrp0-rp | grep is_chassis | wc -l`])
-trim_zeros() {
- sed 's/\(00\)\{1,\}$//'
-}
-
garp="fffffffffffff00000000001810007de08060001080006040001f00000000001c0a80064000000000000c0a80064"
echo $garp > expected_out
@@ -14256,10 +14216,6 @@ wc -l], [0], [4
chassis_uuid=$(fetch_column Chassis _uuid name=hv1)
wait_row_count Port_Binding 1 logical_port=cr-ip6_public chassis=$chassis_uuid
-trim_zeros() {
- sed 's/\(00\)\{1,\}$//'
-}
-
# Test the IPv6 Neighbor Solicitation (NS) - nd_ns action for unknown MAC
# addresses. ovn-controller should generate an IPv6 NS request for IPv6
# packets whose MAC is unknown (in the ARP_REQUEST router pipeline stage.
@@ -19729,11 +19685,6 @@ test_dhcp() {
as hv1 ovs-appctl netdev-dummy/receive hv${inport}-ext${inport} $request
}
-
-trim_zeros() {
- sed 's/\(00\)\{1,\}$//'
-}
-
# This shell function sends a DHCPv6 request packet
# test_dhcpv6 INPORT SRC_MAC SRC_LLA DHCPv6_MSG_TYPE OFFER_IP OUTPORT...
# The OUTPORTs (zero or more) list the VIFs on which the original DHCPv6
@@ -31365,10 +31316,6 @@ send_icmp_packet() {
as hv$hv ovs-appctl netdev-dummy/receive hv$hv-vif$inport $packet
}
-trim_zeros() {
- sed 's/\(00\)\{1,\}$//'
-}
-
AS_BOX([Wait for all ports to be up])
wait_for_ports_up
trim_zeros was redefined multiple times in ovn.at, and was undefined for one test. Signed-off-by: Xavier Simonart <xsimonar@redhat.com> --- tests/ovn-macros.at | 4 ++++ tests/ovn.at | 53 --------------------------------------------- 2 files changed, 4 insertions(+), 53 deletions(-)