diff mbox series

[OpenWrt-Devel] ar71xx: add support for UniFi-AC-Mesh-Pro

Message ID mailman.714.1541675268.2376.openwrt-devel@lists.openwrt.org
State Accepted
Delegated to: John Crispin
Headers show
Series [OpenWrt-Devel] ar71xx: add support for UniFi-AC-Mesh-Pro | expand

Commit Message

hurrhnn--- via openwrt-devel Nov. 8, 2018, 11:09 a.m. UTC 
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.

To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
This adds the build option for UniFi AC Mesh Pro as well as
model detection for it.
The device is a hardware clone of the AC Pro.

- SoC: QCA9563-AL3A (775Mhz)
- RAM: 128MiB
- Flash: 16MiB - dual firmware partitions!
- LAN: 2x 1000M - POE+
- Wireless:
        2.4G: QCA9563
          5G: UniFi Chip, QCA988X compatible

Signed-off-by: Christoph Krapp <achterin@googlemail.com>
---
 target/linux/ar71xx/base-files/lib/ar71xx.sh    | 17 ++++++++++++-----
 .../files/arch/mips/ath79/Kconfig.openwrt       |  2 +-
 .../files/arch/mips/ath79/mach-ubnt-unifiac.c   |  2 +-
 .../ar71xx/files/arch/mips/ath79/machtypes.h    |  2 +-
 target/linux/ar71xx/image/generic-ubnt.mk       |  6 ++++++
 5 files changed, 21 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 05f497fcbf..a9df93a2da 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -98,22 +98,28 @@  ubnt_xm_board_detect() {
 	[ -z "$model" ] || AR71XX_MODEL="${model}${magic:3:1}"
 }
 
-ubnt_ac_lite_get_mtd_part_magic() {
+ubnt_unifi_ac_get_mtd_part_magic() {
 	ar71xx_get_mtd_offset_size_format EEPROM 12 2 %02x
 }
 
-ubnt_ac_lite_board_detect() {
+ubnt_unifi_ac_board_detect() {
 	local model
 	local magic
 
-	magic="$(ubnt_ac_lite_get_mtd_part_magic)"
+	magic="$(ubnt_unifi_ac_get_mtd_part_magic)"
 	case ${magic:0:4} in
 	"e517")
 		model="Ubiquiti UniFi-AC-LITE"
 		;;
+	"e537")
+		model="Ubiquiti UniFi-AC-PRO"
+		;;
 	"e557")
 		model="Ubiquiti UniFi-AC-MESH"
 		;;
+	"e567")
+		model="Ubiquiti UniFi-AC-MESH-PRO"
+		;;
 	esac
 
 	[ -z "$model" ] || AR71XX_MODEL="${model}"
@@ -1388,10 +1394,11 @@  ar71xx_board_detect() {
 		;;
 	*"UniFi-AC-LITE/MESH")
 		name="unifiac-lite"
-		ubnt_ac_lite_board_detect
+		ubnt_unifi_ac_board_detect
 		;;
-	*"UniFi-AC-PRO")
+	*"UniFi-AC-PRO/MESH-PRO")
 		name="unifiac-pro"
+		ubnt_unifi_ac_board_detect
 		;;
 	*"UniFiAP Outdoor")
 		name="unifi-outdoor"
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index f60825a6dd..86581a6743 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -2133,7 +2133,7 @@  config ATH79_MACH_UBNT
 	select ATH79_DEV_USB
 
 config ATH79_MACH_UBNT_UNIFIAC
-	bool "Ubiquiti UniFi AC (LITE/LR/MESH/PRO) support"
+	bool "Ubiquiti UniFi AC (LITE/LR/MESH/PRO/MESH-PRO) support"
 	select SOC_QCA956X
 	select ATH79_DEV_AP9X_PCI if PCI
 	select ATH79_DEV_ETH
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c
index 5ea0028df8..09a0bba867 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c
@@ -176,4 +176,4 @@  static void __init ubnt_unifiac_pro_setup(void)
 
 
 MIPS_MACHINE(ATH79_MACH_UBNT_UNIFIAC_PRO, "UBNT-UF-AC-PRO",
-	     "Ubiquiti UniFi-AC-PRO", ubnt_unifiac_pro_setup);
+	     "Ubiquiti UniFi-AC-PRO/MESH-PRO", ubnt_unifiac_pro_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 987e80bb1f..2298be55bb 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -333,7 +333,7 @@  enum ath79_mach_type {
 	ATH79_MACH_UBNT_UAP_PRO,		/* Ubiquiti UniFi AP Pro */
 	ATH79_MACH_UBNT_UNIFI,			/* Ubiquiti Unifi */
 	ATH79_MACH_UBNT_UNIFIAC_LITE,		/* Ubiquiti Unifi AC LITE/LR/MESH */
-	ATH79_MACH_UBNT_UNIFIAC_PRO,		/* Ubiquiti Unifi AC PRO */
+	ATH79_MACH_UBNT_UNIFIAC_PRO,		/* Ubiquiti Unifi AC PRO/MESH PRO */
 	ATH79_MACH_UBNT_UNIFI_OUTDOOR,		/* Ubiquiti UnifiAP Outdoor */
 	ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS,	/* Ubiquiti UnifiAP Outdoor+ */
 	ATH79_MACH_UBNT_XM,			/* Ubiquiti Networks XM board rev 1.0 */
diff --git a/target/linux/ar71xx/image/generic-ubnt.mk b/target/linux/ar71xx/image/generic-ubnt.mk
index 6941012cbe..42275bae18 100644
--- a/target/linux/ar71xx/image/generic-ubnt.mk
+++ b/target/linux/ar71xx/image/generic-ubnt.mk
@@ -143,6 +143,12 @@  define Device/ubnt-unifiac-pro
 endef
 TARGET_DEVICES += ubnt-unifiac-pro
 
+define Device/ubnt-unifiac-mesh-pro
+  $(Device/ubnt-unifiac-pro)
+  DEVICE_TITLE := Ubiquiti UniFi AC-Mesh-Pro
+endef
+TARGET_DEVICES += ubnt-unifiac-mesh-pro
+
 define Device/ubnt-unifi-outdoor
   $(Device/ubnt-bz)
   DEVICE_TITLE := Ubiquiti UniFi Outdoor