[06/12] rockchip: remove kernel 5.15 patches and config

Message ID	mailman.35640.1694529814.1880391.openwrt-devel@lists.openwrt.org
State	Accepted, archived
Delegated to:	David Bauer
Headers	show Return-Path: <openwrt-devel-bounces+incoming=patchwork.ozlabs.org@lists.openwrt.org> To: openwrt-devel@lists.openwrt.org Subject: [PATCH 06/12] rockchip: remove kernel 5.15 patches and config Date: Tue, 12 Sep 2023 22:42:34 +0800 In-Reply-To: <20230912144240.51396-1-cnsztl@immortalwrt.org> References: <20230912144240.51396-1-cnsztl@immortalwrt.org> MIME-Version: 1.0 Message-ID: <mailman.35640.1694529814.1880391.openwrt-devel@lists.openwrt.org> From: Tianling Shen via openwrt-devel <openwrt-devel@lists.openwrt.org> Precedence: list Reply-To: Tianling Shen <cnsztl@immortalwrt.org> Content-Type: multipart/mixed; boundary="===============4548995657211736664==" Sender: "openwrt-devel" <openwrt-devel-bounces@lists.openwrt.org> Errors-To: openwrt-devel-bounces+incoming=patchwork.ozlabs.org@lists.openwrt.org
Series	[01/12] u-boot: introduce dependencies check for swig and pyelftools \| expand [01/12] u-boot: introduce dependencies check for swig and pyelftools [02/12] uboot-rockchip: Update to 2023.07.02 [03/12] rkbin: add new TF-A package for rk35xx [04/12] rockchip: move image generation command to default [05/12] rockchip: switch to kernel 6.1 [06/12] rockchip: remove kernel 5.15 patches and config [07/12] rockchip: enable drivers for rk356x [09/12] uboot-rockchip: add NanoPi R5S support [10/12] rockchip: add NanoPi R5S support [11/12] uboot-rockchip: add NanoPi R5C support [12/12] rockchip: add NanoPi R5C support

diff --git a/target/linux/rockchip/armv8/config-5.15 b/target/linux/rockchip/armv8/config-5.15 deleted file mode 100644 index 08ce65d8ea..0000000000 --- a/target/linux/rockchip/armv8/config-5.15 +++ /dev/null @@ -1,644 +0,0 @@ -CONFIG_64BIT=y -CONFIG_ARCH_DMA_ADDR_T_64BIT=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y -CONFIG_ARCH_MMAP_RND_BITS=18 -CONFIG_ARCH_MMAP_RND_BITS_MAX=33 -CONFIG_ARCH_MMAP_RND_BITS_MIN=18 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 -CONFIG_ARCH_PROC_KCORE_TEXT=y -CONFIG_ARCH_ROCKCHIP=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_STACKWALK=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_WANTS_NO_INSTR=y -CONFIG_ARC_EMAC_CORE=y -CONFIG_ARM64=y -CONFIG_ARM64_4K_PAGES=y -CONFIG_ARM64_CNP=y -CONFIG_ARM64_CRYPTO=y -CONFIG_ARM64_EPAN=y -CONFIG_ARM64_ERRATUM_819472=y -CONFIG_ARM64_ERRATUM_824069=y -CONFIG_ARM64_ERRATUM_826319=y -CONFIG_ARM64_ERRATUM_827319=y -CONFIG_ARM64_ERRATUM_832075=y -CONFIG_ARM64_ERRATUM_843419=y -CONFIG_ARM64_ERRATUM_845719=y -CONFIG_ARM64_ERRATUM_858921=y -CONFIG_ARM64_ERRATUM_1742098=y -CONFIG_ARM64_HW_AFDBM=y -CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y -CONFIG_ARM64_PAGE_SHIFT=12 -CONFIG_ARM64_PAN=y -CONFIG_ARM64_PA_BITS=48 -CONFIG_ARM64_PA_BITS_48=y -CONFIG_ARM64_PTR_AUTH=y -CONFIG_ARM64_PTR_AUTH_KERNEL=y -CONFIG_ARM64_RAS_EXTN=y -CONFIG_ARM64_SVE=y -CONFIG_ARM64_TAGGED_ADDR_ABI=y -CONFIG_ARM64_VA_BITS=48 -# CONFIG_ARM64_VA_BITS_39 is not set -CONFIG_ARM64_VA_BITS_48=y -CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y -# CONFIG_ARMV8_DEPRECATED is not set -CONFIG_ARM_AMBA=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y -CONFIG_ARM_CPUIDLE=y -CONFIG_ARM_GIC=y -CONFIG_ARM_GIC_V2M=y -CONFIG_ARM_GIC_V3=y -CONFIG_ARM_GIC_V3_ITS=y -CONFIG_ARM_GIC_V3_ITS_PCI=y -CONFIG_ARM_MHU=y -CONFIG_ARM_MHU_V2=y -CONFIG_ARM_PSCI_CPUIDLE=y -CONFIG_ARM_PSCI_CPUIDLE_DOMAIN=y -CONFIG_ARM_PSCI_FW=y -# CONFIG_ARM_RK3399_DMC_DEVFREQ is not set -CONFIG_ARM_SCPI_CPUFREQ=y -CONFIG_ARM_SCPI_POWER_DOMAIN=y -CONFIG_ARM_SCPI_PROTOCOL=y -CONFIG_ARM_SMMU=y -CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT=y -# CONFIG_ARM_SMMU_LEGACY_DT_BINDINGS is not set -CONFIG_ARM_SMMU_V3=y -# CONFIG_ARM_SMMU_V3_SVA is not set -CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GPIO=y -CONFIG_BACKLIGHT_PWM=y -CONFIG_BLK_DEV_BSG=y -CONFIG_BLK_DEV_BSGLIB=y -CONFIG_BLK_DEV_BSG_COMMON=y -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_BLK_DEV_INTEGRITY=y -CONFIG_BLK_DEV_INTEGRITY_T10=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NVME=y -CONFIG_BLK_DEV_PCIESSD_MTIP32XX=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BLK_PM=y -CONFIG_BLOCK_COMPAT=y -CONFIG_BRCMSTB_GISB_ARB=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y -CONFIG_CHARGER_GPIO=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLK_PX30=y -CONFIG_CLK_RK3308=y -CONFIG_CLK_RK3328=y -CONFIG_CLK_RK3368=y -CONFIG_CLK_RK3399=y -CONFIG_CLK_RK3568=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMA=y -CONFIG_CMA_ALIGNMENT=8 -CONFIG_CMA_AREAS=7 -# CONFIG_CMA_DEBUG is not set -# CONFIG_CMA_DEBUGFS is not set -CONFIG_CMA_SIZE_MBYTES=5 -# CONFIG_CMA_SIZE_SEL_MAX is not set -CONFIG_CMA_SIZE_SEL_MBYTES=y -# CONFIG_CMA_SIZE_SEL_MIN is not set -# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set -# CONFIG_CMA_SYSFS is not set -CONFIG_COMMON_CLK=y -CONFIG_COMMON_CLK_RK808=y -CONFIG_COMMON_CLK_ROCKCHIP=y -CONFIG_COMMON_CLK_SCPI=y -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CONFIGFS_FS=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_CONTIG_ALLOC=y -CONFIG_CPUFREQ_DT=y -CONFIG_CPUFREQ_DT_PLATDEV=y -CONFIG_CPU_FREQ=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_MENU=y -CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y -CONFIG_CPU_ISOLATION=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_PM=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_THERMAL=y -CONFIG_CRASH_CORE=y -CONFIG_CRASH_DUMP=y -CONFIG_CRC16=y -# CONFIG_CRC32_SARWATE is not set -CONFIG_CRC32_SLICEBY8=y -CONFIG_CRC_T10DIF=y -CONFIG_CROSS_MEMORY_ATTACH=y -CONFIG_CRYPTO_AES_ARM64=y -CONFIG_CRYPTO_AES_ARM64_CE=y -CONFIG_CRYPTO_AES_ARM64_CE_BLK=y -CONFIG_CRYPTO_AES_ARM64_CE_CCM=y -CONFIG_CRYPTO_CRC32=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CRCT10DIF=y -CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=y -CONFIG_CRYPTO_CRYPTD=y -# CONFIG_CRYPTO_DEV_ROCKCHIP is not set -CONFIG_CRYPTO_GHASH_ARM64_CE=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_SIMD=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEVFREQ_GOV_PASSIVE is not set -CONFIG_DEVFREQ_GOV_PERFORMANCE=y -CONFIG_DEVFREQ_GOV_POWERSAVE=y -CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y -CONFIG_DEVFREQ_GOV_USERSPACE=y -# CONFIG_DEVFREQ_THERMAL is not set -CONFIG_DEVMEM=y -# CONFIG_DEVPORT is not set -CONFIG_DMADEVICES=y -CONFIG_DMA_CMA=y -CONFIG_DMA_DIRECT_REMAP=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_OF=y -CONFIG_DMA_OPS=y -CONFIG_DMA_REMAP=y -CONFIG_DMA_SHARED_BUFFER=y -CONFIG_DNOTIFY=y -CONFIG_DTC=y -CONFIG_DT_IDLE_STATES=y -CONFIG_DUMMY_CONSOLE=y -CONFIG_DWMAC_DWC_QOS_ETH=y -CONFIG_DWMAC_GENERIC=y -CONFIG_DWMAC_ROCKCHIP=y -CONFIG_DW_WATCHDOG=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EEPROM_AT24=y -CONFIG_EMAC_ROCKCHIP=y -CONFIG_ENERGY_MODEL=y -CONFIG_EXT4_FS=y -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXTCON=y -CONFIG_F2FS_FS=y -CONFIG_FANOTIFY=y -CONFIG_FHANDLE=y -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -# CONFIG_FORTIFY_SOURCE is not set -CONFIG_FRAME_POINTER=y -CONFIG_FS_IOMAP=y -CONFIG_FS_MBCACHE=y -CONFIG_FS_POSIX_ACL=y -CONFIG_FWNODE_MDIO=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ARCH_TOPOLOGY=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_CPU_VULNERABILITIES=y -CONFIG_GENERIC_CSUM=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_FIND_FIRST_BIT=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_MIGRATION=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_CDEV=y -CONFIG_GPIO_DWAPB=y -CONFIG_GPIO_GENERIC=y -CONFIG_GPIO_GENERIC_PLATFORM=y -CONFIG_GPIO_ROCKCHIP=y -CONFIG_GPIO_SYSCON=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HID=y -CONFIG_HID_GENERIC=y -CONFIG_HOTPLUG_CPU=y -CONFIG_HOTPLUG_PCI=y -# CONFIG_HOTPLUG_PCI_CPCI is not set -# CONFIG_HOTPLUG_PCI_PCIE is not set -# CONFIG_HOTPLUG_PCI_SHPC is not set -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_HWMON=y -CONFIG_HWSPINLOCK=y -CONFIG_HW_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_COMPAT=y -CONFIG_I2C_HELPER_AUTO=y -CONFIG_I2C_RK3X=y -CONFIG_IIO=y -CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 -CONFIG_INDIRECT_PIO=y -CONFIG_INPUT=y -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_FF_MEMLESS=y -CONFIG_INPUT_KEYBOARD=y -CONFIG_INPUT_LEDS=y -CONFIG_INPUT_MATRIXKMAP=y -# CONFIG_INPUT_RK805_PWRKEY is not set -CONFIG_IOMMU_API=y -# CONFIG_IOMMU_DEBUGFS is not set -CONFIG_IOMMU_DEFAULT_PASSTHROUGH=y -CONFIG_IOMMU_DMA=y -CONFIG_IOMMU_IOVA=y -CONFIG_IOMMU_IO_PGTABLE=y -# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set -CONFIG_IOMMU_IO_PGTABLE_LPAE=y -# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set -CONFIG_IOMMU_SUPPORT=y -# CONFIG_IO_STRICT_DEVMEM is not set -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_MSI_IOMMU=y -CONFIG_IRQ_TIME_ACCOUNTING=y -CONFIG_IRQ_WORK=y -CONFIG_JBD2=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JUMP_LABEL=y -CONFIG_KALLSYMS=y -CONFIG_KCMP=y -CONFIG_KEXEC_CORE=y -CONFIG_KEXEC_FILE=y -CONFIG_KSM=y -# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_PWM=y -CONFIG_LEDS_SYSCON=y -CONFIG_LEDS_TRIGGER_CPU=y -CONFIG_LEDS_TRIGGER_PANIC=y -CONFIG_LIBCRC32C=y -CONFIG_LIBFDT=y -CONFIG_LOCALVERSION_AUTO=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_LOG_BUF_SHIFT=19 -CONFIG_MAGIC_SYSRQ=y -CONFIG_MAGIC_SYSRQ_SERIAL=y -CONFIG_MAILBOX=y -# CONFIG_MAILBOX_TEST is not set -CONFIG_MDIO_BUS=y -CONFIG_MDIO_BUS_MUX=y -CONFIG_MDIO_BUS_MUX_GPIO=y -CONFIG_MDIO_BUS_MUX_MMIOREG=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_DEVRES=y -CONFIG_MEMFD_CREATE=y -CONFIG_MEMORY_ISOLATION=y -CONFIG_MFD_CORE=y -# CONFIG_MFD_KHADAS_MCU is not set -CONFIG_MFD_RK808=y -CONFIG_MFD_SYSCON=y -CONFIG_MIGRATION=y -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_MINORS=32 -CONFIG_MMC_CQHCI=y -CONFIG_MMC_DW=y -# CONFIG_MMC_DW_BLUEFIELD is not set -# CONFIG_MMC_DW_EXYNOS is not set -# CONFIG_MMC_DW_HI3798CV200 is not set -# CONFIG_MMC_DW_K3 is not set -# CONFIG_MMC_DW_PCI is not set -CONFIG_MMC_DW_PLTFM=y -CONFIG_MMC_DW_ROCKCHIP=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_OF_ARASAN=y -CONFIG_MMC_SDHCI_OF_DWCMSHC=y -# CONFIG_MMC_SDHCI_PCI is not set -CONFIG_MMC_SDHCI_PLTFM=y -CONFIG_MODULES_USE_ELF_RELA=y -CONFIG_MOTORCOMM_PHY=y -CONFIG_MQ_IOSCHED_DEADLINE=y -# CONFIG_MTD_CFI is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_PTP_CLASSIFY=y -CONFIG_NET_SELFTESTS=y -CONFIG_NLS=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NOP_USB_XCEIV=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_NR_CPUS=256 -CONFIG_NVMEM=y -CONFIG_NVMEM_ROCKCHIP_EFUSE=y -# CONFIG_NVMEM_ROCKCHIP_OTP is not set -CONFIG_NVMEM_SYSFS=y -CONFIG_NVME_CORE=y -# CONFIG_NVME_HWMON is not set -# CONFIG_NVME_MULTIPATH is not set -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_DYNAMIC=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IOMMU=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OF_OVERLAY=y -CONFIG_OF_RESOLVE=y -CONFIG_OLD_SIGSUSPEND3=y -# CONFIG_OVERLAY_FS_XINO_AUTO is not set -CONFIG_PADATA=y -CONFIG_PAGE_POOL=y -# CONFIG_PANIC_ON_OOPS is not set -CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_PARTITION_PERCPU=y -CONFIG_PCI=y -CONFIG_PCIEAER=y -CONFIG_PCIEASPM=y -CONFIG_PCIEASPM_DEFAULT=y -# CONFIG_PCIEASPM_PERFORMANCE is not set -# CONFIG_PCIEASPM_POWERSAVE is not set -# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set -CONFIG_PCIEPORTBUS=y -CONFIG_PCIE_DW=y -CONFIG_PCIE_DW_HOST=y -CONFIG_PCIE_PME=y -CONFIG_PCIE_ROCKCHIP=y -CONFIG_PCIE_ROCKCHIP_DW_HOST=y -CONFIG_PCIE_ROCKCHIP_HOST=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -CONFIG_PCI_STUB=y -CONFIG_PCS_XPCS=y -CONFIG_PGTABLE_LEVELS=4 -CONFIG_PHYLIB=y -CONFIG_PHYLINK=y -CONFIG_PHYS_ADDR_T_64BIT=y -CONFIG_PHY_ROCKCHIP_DP=y -# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set -CONFIG_PHY_ROCKCHIP_EMMC=y -# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set -# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set -# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set -CONFIG_PHY_ROCKCHIP_INNO_USB2=y -CONFIG_PHY_ROCKCHIP_PCIE=y -CONFIG_PHY_ROCKCHIP_TYPEC=y -CONFIG_PHY_ROCKCHIP_USB=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_RK805=y -CONFIG_PINCTRL_ROCKCHIP=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_PL330_DMA=y -CONFIG_PLATFORM_MHU=y -CONFIG_PM=y -CONFIG_PM_CLK=y -CONFIG_PM_DEVFREQ=y -# CONFIG_PM_DEVFREQ_EVENT is not set -CONFIG_PM_GENERIC_DOMAINS=y -CONFIG_PM_GENERIC_DOMAINS_OF=y -CONFIG_PM_OPP=y -CONFIG_POWER_RESET=y -CONFIG_POWER_SUPPLY=y -CONFIG_POWER_SUPPLY_HWMON=y -CONFIG_PPS=y -CONFIG_PREEMPT=y -CONFIG_PREEMPTION=y -CONFIG_PREEMPT_COUNT=y -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_RCU=y -CONFIG_PRINTK_TIME=y -# CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_PROC_VMCORE=y -CONFIG_PTP_1588_CLOCK=y -CONFIG_PTP_1588_CLOCK_OPTIONAL=y -CONFIG_PWM=y -CONFIG_PWM_ROCKCHIP=y -CONFIG_PWM_SYSFS=y -# CONFIG_QFMT_V2 is not set -CONFIG_QUEUED_RWLOCKS=y -CONFIG_QUEUED_SPINLOCKS=y -CONFIG_QUOTA=y -CONFIG_QUOTACTL=y -CONFIG_RAID_ATTRS=y -CONFIG_RANDOMIZE_BASE=y -CONFIG_RANDOMIZE_MODULE_REGION_FULL=y -CONFIG_RAS=y -CONFIG_RATIONAL=y -# CONFIG_RAVE_SP_CORE is not set -CONFIG_RCU_TRACE=y -CONFIG_REALTEK_PHY=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_IRQ=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FAN53555=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_GPIO=y -CONFIG_REGULATOR_PWM=y -CONFIG_REGULATOR_RK808=y -CONFIG_RELOCATABLE=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RFS_ACCEL=y -CONFIG_ROCKCHIP_GRF=y -CONFIG_ROCKCHIP_IODOMAIN=y -CONFIG_ROCKCHIP_IOMMU=y -CONFIG_ROCKCHIP_MBOX=y -CONFIG_ROCKCHIP_PHY=y -CONFIG_ROCKCHIP_PM_DOMAINS=y -# CONFIG_ROCKCHIP_SARADC is not set -CONFIG_ROCKCHIP_THERMAL=y -CONFIG_ROCKCHIP_TIMER=y -CONFIG_RODATA_FULL_DEFAULT_ENABLED=y -CONFIG_RPS=y -CONFIG_RSEQ=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_RK808=y -CONFIG_RTC_I2C_AND_SPI=y -CONFIG_RTC_NVMEM=y -# CONFIG_RUNTIME_TESTING_MENU is not set -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_SCHED_MC=y -CONFIG_SCSI=y -CONFIG_SCSI_COMMON=y -# CONFIG_SCSI_LOWLEVEL is not set -# CONFIG_SCSI_PROC_FS is not set -CONFIG_SCSI_SAS_ATTRS=y -CONFIG_SCSI_SAS_HOST_SMP=y -CONFIG_SCSI_SAS_LIBSAS=y -# CONFIG_SECURITY_DMESG_RESTRICT is not set -CONFIG_SENSORS_ARM_SCPI=y -CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y -CONFIG_SERIAL_8250_DW=y -CONFIG_SERIAL_8250_DWLIB=y -CONFIG_SERIAL_8250_EXAR=y -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_SERIAL_DEV_BUS=y -CONFIG_SERIAL_DEV_CTRL_TTYPORT=y -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SERIO=y -CONFIG_SERIO_AMBAKMI=y -CONFIG_SERIO_LIBPS2=y -CONFIG_SG_POOL=y -CONFIG_SLUB_DEBUG=y -CONFIG_SMP=y -CONFIG_SOCK_RX_QUEUE_MAPPING=y -CONFIG_SPARSEMEM=y -CONFIG_SPARSEMEM_EXTREME=y -CONFIG_SPARSEMEM_VMEMMAP=y -CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_DYNAMIC=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -CONFIG_SPI_ROCKCHIP=y -# CONFIG_SPI_ROCKCHIP_SFC is not set -CONFIG_SPI_SPIDEV=y -# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set -CONFIG_SQUASHFS_DECOMP_SINGLE=y -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FILE_CACHE=y -# CONFIG_SQUASHFS_FILE_DIRECT is not set -CONFIG_SRAM=y -CONFIG_SRCU=y -CONFIG_STACKPROTECTOR=y -CONFIG_STACKPROTECTOR_PER_TASK=y -CONFIG_STACKPROTECTOR_STRONG=y -CONFIG_STMMAC_ETH=y -CONFIG_STMMAC_PLATFORM=y -CONFIG_STRICT_DEVMEM=y -# CONFIG_STRIP_ASM_SYMS is not set -# CONFIG_SWAP is not set -CONFIG_SWIOTLB=y -CONFIG_SWPHY=y -CONFIG_SYNC_FILE=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_SYSFS_SYSCALL=y -CONFIG_SYSVIPC_COMPAT=y -# CONFIG_TEXTSEARCH is not set -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_EMULATION=y -CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_HWMON=y -CONFIG_THERMAL_OF=y -CONFIG_THREAD_INFO_IN_TASK=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TRACE_CLOCK=y -CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y -CONFIG_TRANSPARENT_HUGEPAGE=y -CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y -# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set -CONFIG_TREE_RCU=y -CONFIG_TREE_SRCU=y -CONFIG_TYPEC=y -# CONFIG_TYPEC_DP_ALTMODE is not set -CONFIG_TYPEC_FUSB302=y -# CONFIG_TYPEC_HD3SS3220 is not set -# CONFIG_TYPEC_MUX_PI3USB30532 is not set -# CONFIG_TYPEC_STUSB160X is not set -# CONFIG_TYPEC_TCPCI is not set -CONFIG_TYPEC_TCPM=y -# CONFIG_TYPEC_TPS6598X is not set -# CONFIG_UACCE is not set -# CONFIG_UCLAMP_TASK is not set -# CONFIG_UEVENT_HELPER is not set -CONFIG_UNINLINE_SPIN_UNLOCK=y -CONFIG_UNMAP_KERNEL_AT_EL0=y -CONFIG_USB=y -CONFIG_USB_COMMON=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_HOST=y -CONFIG_USB_DWC3_OF_SIMPLE=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_HCD_PLATFORM=y -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -CONFIG_USB_HID=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PLATFORM=y -CONFIG_USB_PHY=y -CONFIG_USB_ROLE_SWITCH=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_ULPI=y -CONFIG_USB_ULPI_BUS=y -CONFIG_USB_ULPI_VIEWPORT=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_PLATFORM=y -# CONFIG_VIRTIO_MENU is not set -CONFIG_VMAP_STACK=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_WATCHDOG_CORE=y -CONFIG_XARRAY_MULTI=y -CONFIG_XPS=y -CONFIG_XXHASH=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_ARMTHUMB=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZONE_DMA32=y diff --git a/target/linux/rockchip/patches-5.15/005-arm64-dts-rockchip-add-EEPROM-node-for-NanoPi-R4S.patch b/target/linux/rockchip/patches-5.15/005-arm64-dts-rockchip-add-EEPROM-node-for-NanoPi-R4S.patch deleted file mode 100644 index 792028b292..0000000000 --- a/target/linux/rockchip/patches-5.15/005-arm64-dts-rockchip-add-EEPROM-node-for-NanoPi-R4S.patch +++ /dev/null @@ -1,31 +0,0 @@ -From af20b3384e8723077cc6484160b0cf4e9be321de Mon Sep 17 00:00:00 2001 -From: Tianling Shen <cnsztl@gmail.com> -Date: Mon, 7 Jun 2021 15:45:37 +0800 -Subject: [PATCH] arm64: dts: rockchip: add EEPROM node for NanoPi R4S - -NanoPi R4S has a EEPROM attached to the 2nd I2C bus (U92), which -stores the MAC address. - -Signed-off-by: Tianling Shen <cnsztl@gmail.com> ---- - arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts | 9 +++++++++ - 1 file changed, 9 insertions(+) - ---- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts -+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts -@@ -68,6 +68,15 @@ - status = "disabled"; - }; - -+&i2c2 { -+ eeprom@51 { -+ compatible = "microchip,24c02", "atmel,24c02"; -+ reg = <0x51>; -+ pagesize = <16>; -+ read-only; /* This holds our MAC */ -+ }; -+}; -+ - &i2c4 { - status = "disabled"; - }; diff --git a/target/linux/rockchip/patches-5.15/006-v6.4-arm64-dts-rockchip-Add-FriendlyARM-NanoPi-R2C.patch b/target/linux/rockchip/patches-5.15/006-v6.4-arm64-dts-rockchip-Add-FriendlyARM-NanoPi-R2C.patch deleted file mode 100644 index f58463b3d1..0000000000 --- a/target/linux/rockchip/patches-5.15/006-v6.4-arm64-dts-rockchip-Add-FriendlyARM-NanoPi-R2C.patch +++ /dev/null @@ -1,70 +0,0 @@ -From 004589ff9df5b75672a78b6c3c4cba93202b14c9 Mon Sep 17 00:00:00 2001 -From: Tianling Shen <cnsztl@gmail.com> -Date: Sat, 25 Mar 2023 15:40:20 +0800 -Subject: [PATCH] arm64: dts: rockchip: Add FriendlyARM NanoPi R2C - -The NanoPi R2C is a minor variant of NanoPi R2S with the on-board NIC -chip changed from rtl8211e to yt8521s, and otherwise identical to R2S. - -Signed-off-by: Tianling Shen <cnsztl@gmail.com> -Link: https://lore.kernel.org/r/20230325074022.9818-3-cnsztl@gmail.com -Signed-off-by: Heiko Stuebner <heiko@sntech.de> ---- - arch/arm64/boot/dts/rockchip/Makefile | 1 + - .../boot/dts/rockchip/rk3328-nanopi-r2c.dts | 40 +++++++++++++++++++ - 2 files changed, 41 insertions(+) - create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts - ---- a/arch/arm64/boot/dts/rockchip/Makefile -+++ b/arch/arm64/boot/dts/rockchip/Makefile -@@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a9 - dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb - dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb - dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb -+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb - dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb - dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb - dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb ---- /dev/null -+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts -@@ -0,0 +1,40 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+/* -+ * Copyright (c) 2021 FriendlyElec Computer Tech. Co., Ltd. -+ * (http://www.friendlyarm.com) -+ * -+ * Copyright (c) 2021-2023 Tianling Shen <cnsztl@gmail.com> -+ */ -+ -+/dts-v1/; -+#include "rk3328-nanopi-r2s.dts" -+ -+/ { -+ model = "FriendlyElec NanoPi R2C"; -+ compatible = "friendlyarm,nanopi-r2c", "rockchip,rk3328"; -+}; -+ -+&gmac2io { -+ phy-handle = <&yt8521s>; -+ tx_delay = <0x22>; -+ rx_delay = <0x12>; -+ -+ mdio { -+ /delete-node/ ethernet-phy@1; -+ -+ yt8521s: ethernet-phy@3 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <3>; -+ -+ motorcomm,clk-out-frequency-hz = <125000000>; -+ motorcomm,keep-pll-enabled; -+ motorcomm,auto-sleep-disabled; -+ -+ pinctrl-0 = <&eth_phy_reset_pin>; -+ pinctrl-names = "default"; -+ reset-assert-us = <10000>; -+ reset-deassert-us = <50000>; -+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; diff --git a/target/linux/rockchip/patches-5.15/007-v6.3-arm64-dts-rockchip-rk3328-Add-Orange-Pi-R1-Plus.patch b/target/linux/rockchip/patches-5.15/007-v6.3-arm64-dts-rockchip-rk3328-Add-Orange-Pi-R1-Plus.patch deleted file mode 100644 index 053a4d0d8e..0000000000 --- a/target/linux/rockchip/patches-5.15/007-v6.3-arm64-dts-rockchip-rk3328-Add-Orange-Pi-R1-Plus.patch +++ /dev/null @@ -1,407 +0,0 @@ -From 51712e1d014aaaa4c6e1e7e84932d58b5c0f59ed Mon Sep 17 00:00:00 2001 -From: Chukun Pan <amadeus@jmu.edu.cn> -Date: Sat, 3 Dec 2022 15:41:49 +0800 -Subject: [PATCH] arm64: dts: rockchip: rk3328: Add Orange Pi R1 Plus - -Orange Pi R1 Plus is a Rockchip RK3328 based SBC by Xunlong. - -This device is similar to the NanoPi R2S, and has a 16MB -SPI NOR (mx25l12805d). The reset button is changed to -directly reset the power supply, another detail is that -both network ports have independent MAC addresses. - -Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> -Link: https://lore.kernel.org/r/20221203074149.11543-3-amadeus@jmu.edu.cn -Signed-off-by: Heiko Stuebner <heiko@sntech.de> ---- - arch/arm64/boot/dts/rockchip/Makefile | 1 + - .../dts/rockchip/rk3328-orangepi-r1-plus.dts | 373 ++++++++++++++++++ - 2 files changed, 374 insertions(+) - create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts - ---- a/arch/arm64/boot/dts/rockchip/Makefile -+++ b/arch/arm64/boot/dts/rockchip/Makefile -@@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1 - dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb - dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb - dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb -+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb - dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb - dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb - dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb ---- /dev/null -+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts -@@ -0,0 +1,373 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -+/* -+ * Based on rk3328-nanopi-r2s.dts, which is: -+ * Copyright (c) 2020 David Bauer <mail@david-bauer.net> -+ */ -+ -+/dts-v1/; -+ -+#include <dt-bindings/gpio/gpio.h> -+#include <dt-bindings/leds/common.h> -+#include "rk3328.dtsi" -+ -+/ { -+ model = "Xunlong Orange Pi R1 Plus"; -+ compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328"; -+ -+ aliases { -+ ethernet1 = &rtl8153; -+ mmc0 = &sdmmc; -+ }; -+ -+ chosen { -+ stdout-path = "serial2:1500000n8"; -+ }; -+ -+ gmac_clk: gmac-clock { -+ compatible = "fixed-clock"; -+ clock-frequency = <125000000>; -+ clock-output-names = "gmac_clkin"; -+ #clock-cells = <0>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>; -+ pinctrl-names = "default"; -+ -+ led-0 { -+ function = LED_FUNCTION_LAN; -+ color = <LED_COLOR_ID_GREEN>; -+ gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ led-1 { -+ function = LED_FUNCTION_STATUS; -+ color = <LED_COLOR_ID_RED>; -+ gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "heartbeat"; -+ }; -+ -+ led-2 { -+ function = LED_FUNCTION_WAN; -+ color = <LED_COLOR_ID_GREEN>; -+ gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+ -+ vcc_sd: sdmmc-regulator { -+ compatible = "regulator-fixed"; -+ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; -+ pinctrl-0 = <&sdmmc0m1_pin>; -+ pinctrl-names = "default"; -+ regulator-name = "vcc_sd"; -+ regulator-boot-on; -+ vin-supply = <&vcc_io>; -+ }; -+ -+ vcc_sys: vcc-sys-regulator { -+ compatible = "regulator-fixed"; -+ regulator-name = "vcc_sys"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ }; -+ -+ vdd_5v_lan: vdd-5v-lan-regulator { -+ compatible = "regulator-fixed"; -+ enable-active-high; -+ gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; -+ pinctrl-0 = <&lan_vdd_pin>; -+ pinctrl-names = "default"; -+ regulator-name = "vdd_5v_lan"; -+ regulator-always-on; -+ regulator-boot-on; -+ vin-supply = <&vcc_sys>; -+ }; -+}; -+ -+&cpu0 { -+ cpu-supply = <&vdd_arm>; -+}; -+ -+&cpu1 { -+ cpu-supply = <&vdd_arm>; -+}; -+ -+&cpu2 { -+ cpu-supply = <&vdd_arm>; -+}; -+ -+&cpu3 { -+ cpu-supply = <&vdd_arm>; -+}; -+ -+&display_subsystem { -+ status = "disabled"; -+}; -+ -+&gmac2io { -+ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; -+ assigned-clock-parents = <&gmac_clk>, <&gmac_clk>; -+ clock_in_out = "input"; -+ phy-handle = <&rtl8211e>; -+ phy-mode = "rgmii"; -+ phy-supply = <&vcc_io>; -+ pinctrl-0 = <&rgmiim1_pins>; -+ pinctrl-names = "default"; -+ snps,aal; -+ rx_delay = <0x18>; -+ tx_delay = <0x24>; -+ status = "okay"; -+ -+ mdio { -+ compatible = "snps,dwmac-mdio"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ rtl8211e: ethernet-phy@1 { -+ reg = <1>; -+ pinctrl-0 = <&eth_phy_reset_pin>; -+ pinctrl-names = "default"; -+ reset-assert-us = <10000>; -+ reset-deassert-us = <50000>; -+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; -+ -+&i2c1 { -+ status = "okay"; -+ -+ rk805: pmic@18 { -+ compatible = "rockchip,rk805"; -+ reg = <0x18>; -+ interrupt-parent = <&gpio1>; -+ interrupts = <24 IRQ_TYPE_LEVEL_LOW>; -+ #clock-cells = <1>; -+ clock-output-names = "xin32k", "rk805-clkout2"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ pinctrl-0 = <&pmic_int_l>; -+ pinctrl-names = "default"; -+ rockchip,system-power-controller; -+ wakeup-source; -+ -+ vcc1-supply = <&vcc_sys>; -+ vcc2-supply = <&vcc_sys>; -+ vcc3-supply = <&vcc_sys>; -+ vcc4-supply = <&vcc_sys>; -+ vcc5-supply = <&vcc_io>; -+ vcc6-supply = <&vcc_sys>; -+ -+ regulators { -+ vdd_log: DCDC_REG1 { -+ regulator-name = "vdd_log"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <712500>; -+ regulator-max-microvolt = <1450000>; -+ regulator-ramp-delay = <12500>; -+ -+ regulator-state-mem { -+ regulator-on-in-suspend; -+ regulator-suspend-microvolt = <1000000>; -+ }; -+ }; -+ -+ vdd_arm: DCDC_REG2 { -+ regulator-name = "vdd_arm"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <712500>; -+ regulator-max-microvolt = <1450000>; -+ regulator-ramp-delay = <12500>; -+ -+ regulator-state-mem { -+ regulator-on-in-suspend; -+ regulator-suspend-microvolt = <950000>; -+ }; -+ }; -+ -+ vcc_ddr: DCDC_REG3 { -+ regulator-name = "vcc_ddr"; -+ regulator-always-on; -+ regulator-boot-on; -+ -+ regulator-state-mem { -+ regulator-on-in-suspend; -+ }; -+ }; -+ -+ vcc_io: DCDC_REG4 { -+ regulator-name = "vcc_io"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ regulator-state-mem { -+ regulator-on-in-suspend; -+ regulator-suspend-microvolt = <3300000>; -+ }; -+ }; -+ -+ vcc_18: LDO_REG1 { -+ regulator-name = "vcc_18"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ -+ regulator-state-mem { -+ regulator-on-in-suspend; -+ regulator-suspend-microvolt = <1800000>; -+ }; -+ }; -+ -+ vcc18_emmc: LDO_REG2 { -+ regulator-name = "vcc18_emmc"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ -+ regulator-state-mem { -+ regulator-on-in-suspend; -+ regulator-suspend-microvolt = <1800000>; -+ }; -+ }; -+ -+ vdd_10: LDO_REG3 { -+ regulator-name = "vdd_10"; -+ regulator-always-on; -+ regulator-boot-on; -+ regulator-min-microvolt = <1000000>; -+ regulator-max-microvolt = <1000000>; -+ -+ regulator-state-mem { -+ regulator-on-in-suspend; -+ regulator-suspend-microvolt = <1000000>; -+ }; -+ }; -+ }; -+ }; -+}; -+ -+&io_domains { -+ pmuio-supply = <&vcc_io>; -+ vccio1-supply = <&vcc_io>; -+ vccio2-supply = <&vcc18_emmc>; -+ vccio3-supply = <&vcc_io>; -+ vccio4-supply = <&vcc_io>; -+ vccio5-supply = <&vcc_io>; -+ vccio6-supply = <&vcc_io>; -+ status = "okay"; -+}; -+ -+&pinctrl { -+ gmac2io { -+ eth_phy_reset_pin: eth-phy-reset-pin { -+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; -+ }; -+ }; -+ -+ leds { -+ lan_led_pin: lan-led-pin { -+ rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; -+ }; -+ -+ sys_led_pin: sys-led-pin { -+ rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; -+ }; -+ -+ wan_led_pin: wan-led-pin { -+ rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; -+ }; -+ }; -+ -+ lan { -+ lan_vdd_pin: lan-vdd-pin { -+ rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; -+ }; -+ }; -+ -+ pmic { -+ pmic_int_l: pmic-int-l { -+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; -+ }; -+ }; -+}; -+ -+&pwm2 { -+ status = "okay"; -+}; -+ -+&sdmmc { -+ bus-width = <4>; -+ cap-sd-highspeed; -+ disable-wp; -+ pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>; -+ pinctrl-names = "default"; -+ vmmc-supply = <&vcc_sd>; -+ status = "okay"; -+}; -+ -+&spi0 { -+ status = "okay"; -+ -+ flash@0 { -+ compatible = "jedec,spi-nor"; -+ reg = <0>; -+ spi-max-frequency = <50000000>; -+ }; -+}; -+ -+&tsadc { -+ rockchip,hw-tshut-mode = <0>; -+ rockchip,hw-tshut-polarity = <0>; -+ status = "okay"; -+}; -+ -+&u2phy { -+ status = "okay"; -+}; -+ -+&u2phy_host { -+ status = "okay"; -+}; -+ -+&u2phy_otg { -+ status = "okay"; -+}; -+ -+&uart2 { -+ status = "okay"; -+}; -+ -+&usb20_otg { -+ dr_mode = "host"; -+ status = "okay"; -+}; -+ -+&usbdrd3 { -+ dr_mode = "host"; -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ /* Second port is for USB 3.0 */ -+ rtl8153: device@2 { -+ compatible = "usbbda,8153"; -+ reg = <2>; -+ }; -+}; -+ -+&usb_host0_ehci { -+ status = "okay"; -+}; -+ -+&usb_host0_ohci { -+ status = "okay"; -+}; diff --git a/target/linux/rockchip/patches-5.15/008-v6.4-arm64-dts-rockchip-Add-Xunlong-OrangePi-R1-Plus-LTS.patch b/target/linux/rockchip/patches-5.15/008-v6.4-arm64-dts-rockchip-Add-Xunlong-OrangePi-R1-Plus-LTS.patch deleted file mode 100644 index cedf28dc79..0000000000 --- a/target/linux/rockchip/patches-5.15/008-v6.4-arm64-dts-rockchip-Add-Xunlong-OrangePi-R1-Plus-LTS.patch +++ /dev/null @@ -1,71 +0,0 @@ -From 387b3bbac5ea6a0a105d685237f033ffe0f184f1 Mon Sep 17 00:00:00 2001 -From: Tianling Shen <cnsztl@gmail.com> -Date: Sat, 25 Mar 2023 15:40:22 +0800 -Subject: [PATCH] arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS - -The OrangePi R1 Plus LTS is a minor variant of OrangePi R1 Plus with -the on-board NIC chip changed from rtl8211e to yt8531c, and otherwise -identical to OrangePi R1 Plus. - -Signed-off-by: Tianling Shen <cnsztl@gmail.com> -Link: https://lore.kernel.org/r/20230325074022.9818-5-cnsztl@gmail.com -Signed-off-by: Heiko Stuebner <heiko@sntech.de> ---- - arch/arm64/boot/dts/rockchip/Makefile | 1 + - .../rockchip/rk3328-orangepi-r1-plus-lts.dts | 40 +++++++++++++++++++ - 2 files changed, 41 insertions(+) - create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts - ---- a/arch/arm64/boot/dts/rockchip/Makefile -+++ b/arch/arm64/boot/dts/rockchip/Makefile -@@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-ev - dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb - dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb - dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb -+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus-lts.dtb - dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb - dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb - dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb ---- /dev/null -+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts -@@ -0,0 +1,40 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+/* -+ * Copyright (c) 2016 Xunlong Software. Co., Ltd. -+ * (http://www.orangepi.org) -+ * -+ * Copyright (c) 2021-2023 Tianling Shen <cnsztl@gmail.com> -+ */ -+ -+/dts-v1/; -+#include "rk3328-orangepi-r1-plus.dts" -+ -+/ { -+ model = "Xunlong Orange Pi R1 Plus LTS"; -+ compatible = "xunlong,orangepi-r1-plus-lts", "rockchip,rk3328"; -+}; -+ -+&gmac2io { -+ phy-handle = <&yt8531c>; -+ tx_delay = <0x19>; -+ rx_delay = <0x05>; -+ -+ mdio { -+ /delete-node/ ethernet-phy@1; -+ -+ yt8531c: ethernet-phy@0 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <0>; -+ -+ motorcomm,clk-out-frequency-hz = <125000000>; -+ motorcomm,keep-pll-enabled; -+ motorcomm,auto-sleep-disabled; -+ -+ pinctrl-0 = <&eth_phy_reset_pin>; -+ pinctrl-names = "default"; -+ reset-assert-us = <15000>; -+ reset-deassert-us = <50000>; -+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; diff --git a/target/linux/rockchip/patches-5.15/100-rockchip-use-system-LED-for-OpenWrt.patch b/target/linux/rockchip/patches-5.15/100-rockchip-use-system-LED-for-OpenWrt.patch deleted file mode 100644 index 01009c5eb8..0000000000 --- a/target/linux/rockchip/patches-5.15/100-rockchip-use-system-LED-for-OpenWrt.patch +++ /dev/null @@ -1,65 +0,0 @@ -From 6731d2c9039fbe1ecf21915eab3acee0a999508a Mon Sep 17 00:00:00 2001 -From: David Bauer <mail@david-bauer.net> -Date: Fri, 10 Jul 2020 21:38:20 +0200 -Subject: [PATCH] rockchip: use system LED for OpenWrt - -Use the SYS LED on the casing for showing system status. - -This patch is kept separate from the NanoPi R2S support patch, as i plan -on submitting the device support upstream. - -Signed-off-by: David Bauer <mail@david-bauer.net> ---- - arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts | 9 ++++++++- - 1 file changed, 8 insertions(+), 1 deletion(-) - ---- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts -+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts -@@ -16,6 +16,11 @@ - aliases { - ethernet1 = &rtl8153; - mmc0 = &sdmmc; -+ -+ led-boot = &sys_led; -+ led-failsafe = &sys_led; -+ led-running = &sys_led; -+ led-upgrade = &sys_led; - }; - - chosen { -@@ -49,18 +54,18 @@ - - lan_led: led-0 { - gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; -- label = "nanopi-r2s:green:lan"; -+ label = "green:lan"; - }; - - sys_led: led-1 { - gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; -- label = "nanopi-r2s:red:sys"; -+ label = "red:sys"; - default-state = "on"; - }; - - wan_led: led-2 { - gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>; -- label = "nanopi-r2s:green:wan"; -+ label = "green:wan"; - }; - }; - ---- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts -+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts -@@ -13,6 +13,11 @@ - aliases { - mmc0 = &sdmmc; - mmc1 = &emmc; -+ -+ led-boot = &power_led; -+ led-failsafe = &power_led; -+ led-running = &power_led; -+ led-upgrade = &power_led; - }; - - chosen { diff --git a/target/linux/rockchip/patches-5.15/103-arm64-rockchip-add-OF-node-for-USB-eth-on-NanoPi-R2S.patch b/target/linux/rockchip/patches-5.15/103-arm64-rockchip-add-OF-node-for-USB-eth-on-NanoPi-R2S.patch deleted file mode 100644 index 2221077c97..0000000000 --- a/target/linux/rockchip/patches-5.15/103-arm64-rockchip-add-OF-node-for-USB-eth-on-NanoPi-R2S.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 2795c8b31a686bdb8338f9404d18ef7a154f0d75 Mon Sep 17 00:00:00 2001 -From: David Bauer <mail@david-bauer.net> -Date: Sun, 26 Jul 2020 13:32:59 +0200 -Subject: [PATCH] arm64: rockchip: add OF node for USB eth on NanoPi R2S - -This adds the OF node for the USB3 ethernet adapter on the FriendlyARM -NanoPi R2S. Add the correct value for the RTL8153 LED configuration -register to match the blink behavior of the other port on the device. - -Signed-off-by: David Bauer <mail@david-bauer.net> ---- - arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts | 7 +++++++ - 1 file changed, 1 insertions(+) - ---- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts -+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts -@@ -402,6 +402,7 @@ - rtl8153: device@2 { - compatible = "usbbda,8153"; - reg = <2>; -+ realtek,led-data = <0x87>; - }; - }; - diff --git a/target/linux/rockchip/patches-5.15/105-nanopi-r4s-sd-signalling.patch b/target/linux/rockchip/patches-5.15/105-nanopi-r4s-sd-signalling.patch deleted file mode 100644 index 856970738a..0000000000 --- a/target/linux/rockchip/patches-5.15/105-nanopi-r4s-sd-signalling.patch +++ /dev/null @@ -1,36 +0,0 @@ -From: David Bauer <mail@david-bauer.net> -Subject: arm64: dts: rockchip: disable UHS modes for NanoPi R4S - -The NanoPi R4S leaves the SD card in 1.8V signalling when rebooting -while U-Boot requires the card to be in 3.3V mode. - -Remove UHS support from the SD controller so the card remains in 3.3V -mode. This reduces transfer speeds but ensures a reboot whether from -userspace or following a kernel panic is always working. - -Signed-off-by: David Bauer <mail@david-bauer.net> - ---- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts -+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts -@@ -335,7 +335,6 @@ - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; -- sd-uhs-sdr104; - vmmc-supply = <&vcc_sd>; - vqmmc-supply = <&vcc_sdio>; - status = "okay"; ---- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts -+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts -@@ -121,6 +121,11 @@ - status = "disabled"; - }; - -+&sdmmc { -+ /delete-property/ sd-uhs-sdr104; -+ cap-sd-highspeed; -+}; -+ - &u2phy0_host { - phy-supply = <&vdd_5v>; - }; diff --git a/target/linux/rockchip/patches-5.15/106-r4s-openwrt-leds.patch b/target/linux/rockchip/patches-5.15/106-r4s-openwrt-leds.patch deleted file mode 100644 index d7579d61e9..0000000000 --- a/target/linux/rockchip/patches-5.15/106-r4s-openwrt-leds.patch +++ /dev/null @@ -1,16 +0,0 @@ ---- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts -+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts -@@ -19,6 +19,13 @@ - model = "FriendlyElec NanoPi R4S"; - compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399"; - -+ aliases { -+ led-boot = &sys_led; -+ led-failsafe = &sys_led; -+ led-running = &sys_led; -+ led-upgrade = &sys_led; -+ }; -+ - /delete-node/ display-subsystem; - - gpio-leds { diff --git a/target/linux/rockchip/patches-5.15/107-arm64-dts-rockchip-Update-LED-properties-for-Orange-.patch b/target/linux/rockchip/patches-5.15/107-arm64-dts-rockchip-Update-LED-properties-for-Orange-.patch deleted file mode 100644 index b1e26d4e3e..0000000000 --- a/target/linux/rockchip/patches-5.15/107-arm64-dts-rockchip-Update-LED-properties-for-Orange-.patch +++ /dev/null @@ -1,56 +0,0 @@ -From d2166e3b3680bd2b206aebf1e1ce4c0d346f3c50 Mon Sep 17 00:00:00 2001 -From: Tianling Shen <cnsztl@gmail.com> -Date: Fri, 19 May 2023 12:10:52 +0800 -Subject: [PATCH] arm64: dts: rockchip: Update LED properties for Orange Pi R1 - Plus - -Add OpenWrt's LED aliases for showing system status. -Also replace function/color with legacy label as OpenWrt relys on it -to update LED settings. - -Signed-off-by: Tianling Shen <cnsztl@gmail.com> ---- - .../dts/rockchip/rk3328-orangepi-r1-plus.dts | 17 +++++++++-------- - 1 file changed, 9 insertions(+), 8 deletions(-) - ---- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts -+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts -@@ -17,6 +17,11 @@ - aliases { - ethernet1 = &rtl8153; - mmc0 = &sdmmc; -+ -+ led-boot = &status_led; -+ led-failsafe = &status_led; -+ led-running = &status_led; -+ led-upgrade = &status_led; - }; - - chosen { -@@ -36,22 +41,18 @@ - pinctrl-names = "default"; - - led-0 { -- function = LED_FUNCTION_LAN; -- color = <LED_COLOR_ID_GREEN>; - gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; -+ label = "green:lan"; - }; - -- led-1 { -- function = LED_FUNCTION_STATUS; -- color = <LED_COLOR_ID_RED>; -+ status_led: led-1 { - gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>; -- linux,default-trigger = "heartbeat"; -+ label = "red:status"; - }; - - led-2 { -- function = LED_FUNCTION_WAN; -- color = <LED_COLOR_ID_GREEN>; - gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>; -+ label = "green:wan"; - }; - }; - diff --git a/target/linux/rockchip/patches-5.15/108-arm64-dts-rockchip-add-LED-configuration-to-Orange-P.patch b/target/linux/rockchip/patches-5.15/108-arm64-dts-rockchip-add-LED-configuration-to-Orange-P.patch deleted file mode 100644 index 37b59925fc..0000000000 --- a/target/linux/rockchip/patches-5.15/108-arm64-dts-rockchip-add-LED-configuration-to-Orange-P.patch +++ /dev/null @@ -1,24 +0,0 @@ -From b46a530d12ada422b9d5b2b97059e0d3ed950b40 Mon Sep 17 00:00:00 2001 -From: Tianling Shen <cnsztl@gmail.com> -Date: Fri, 19 May 2023 12:38:04 +0800 -Subject: [PATCH] arm64: dts: rockchip: add LED configuration to Orange Pi R1 - Plus - -Add the correct value for the RTL8153 LED configuration register to -match the blink behavior of the other port on the device. - -Signed-off-by: Tianling Shen <cnsztl@gmail.com> ---- - arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts -+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts -@@ -362,6 +362,7 @@ - rtl8153: device@2 { - compatible = "usbbda,8153"; - reg = <2>; -+ realtek,led-data = <0x87>; - }; - }; - diff --git a/target/linux/rockchip/patches-5.15/109-nanopc-t4-add-led-aliases.patch b/target/linux/rockchip/patches-5.15/109-nanopc-t4-add-led-aliases.patch deleted file mode 100644 index 1a80dadd48..0000000000 --- a/target/linux/rockchip/patches-5.15/109-nanopc-t4-add-led-aliases.patch +++ /dev/null @@ -1,16 +0,0 @@ ---- a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts -+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts -@@ -15,6 +15,13 @@ - model = "FriendlyElec NanoPC-T4"; - compatible = "friendlyarm,nanopc-t4", "rockchip,rk3399"; - -+ aliases { -+ led-boot = &status_led; -+ led-failsafe = &status_led; -+ led-running = &status_led; -+ led-upgrade = &status_led; -+ }; -+ - vcc12v0_sys: vcc12v0-sys { - compatible = "regulator-fixed"; - regulator-always-on;

[06/12] rockchip: remove kernel 5.15 patches and config

Commit Message

Patch