diff mbox series

[PATCH-22.03,1/2] uboot-sunxi: use UUID of bootdev and bootpart

Message ID 20230106171728.5654-1-git@aiyionpri.me
State New, archived
Headers show
Series [PATCH-22.03,1/2] uboot-sunxi: use UUID of bootdev and bootpart | expand

Commit Message

Jan-Niklas Burfeind Jan. 6, 2023, 5:17 p.m. UTC 
Several sunxi devices come with multiple mmc devices. On such devices,
the mmc device order is unpredictable, so using /dev/mmcblk0p2 as root
device doesn't always work, which results in unbootable devices.

For the Banana Pi BPI-R3 in the mediatek target, this has been solved by
defining aliases for the mmc devices in the DTS. Ideally we would do the
same here, but for sunxi-a64 we already use UUID probing, so let's start
with that (5f2ff607e286 ("uboot-sunxi: a64: allow booting directly from
eMMC")).

Since we're building and including u-boot in each supported device
image, and this method has been proven to work fine for a64, let's just
change the default u-boot env file to do the same.

Fixes: #10080
Fixes: e6d9f6fdff ("sunxi: add support for FriendlyARM NanoPi R1")
Co-authored-by: Karl Palsson <karlp@etactica.com>
Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
[use UUID in default u-boot env, rewrite commit message]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit bf06a7c865531cf20735cbdfac46d4947fcc18a6)
---
 package/boot/uboot-sunxi/uEnv-default.txt | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/package/boot/uboot-sunxi/uEnv-default.txt b/package/boot/uboot-sunxi/uEnv-default.txt
index e024954516..36e41c59b1 100644
--- a/package/boot/uboot-sunxi/uEnv-default.txt
+++ b/package/boot/uboot-sunxi/uEnv-default.txt
@@ -1,6 +1,8 @@ 
 setenv fdt_high ffffffff
-setenv loadkernel fatload mmc 0 \$kernel_addr_r uImage
-setenv loaddtb fatload mmc 0 \$fdt_addr_r dtb
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
+setenv mmc_rootpart 2
+part uuid mmc ${mmc_bootdev}:${mmc_rootpart} uuid
+setenv loadkernel fatload mmc \$mmc_bootdev \$kernel_addr_r uImage
+setenv loaddtb fatload mmc \$mmc_bootdev \$fdt_addr_r dtb
+setenv bootargs console=ttyS0,115200 earlyprintk root=PARTUUID=${uuid} rootwait
 setenv uenvcmd run loadkernel \&\& run loaddtb \&\& bootm \$kernel_addr_r - \$fdt_addr_r
 run uenvcmd