@@ -57,40 +57,6 @@
function = LED_FUNCTION_WAN;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
-
- led-wan2 {
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_WAN;
- gpios = <&switch0 0 GPIO_ACTIVE_LOW>;
- };
-
- led-lan4 {
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_LAN;
- function-enumerator = <4>;
- gpios = <&switch0 3 GPIO_ACTIVE_LOW>;
- };
-
- led-lan3 {
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_LAN;
- function-enumerator = <3>;
- gpios = <&switch0 6 GPIO_ACTIVE_LOW>;
- };
-
- led-lan2 {
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_LAN;
- function-enumerator = <2>;
- gpios = <&switch0 9 GPIO_ACTIVE_HIGH>;
- };
-
- led-lan1 {
- color = <LED_COLOR_ID_BLUE>;
- function = LED_FUNCTION_LAN;
- function-enumerator = <1>;
- gpios = <&switch0 12 GPIO_ACTIVE_LOW>;
- };
};
};
@@ -185,9 +151,6 @@
};
&switch0 {
- gpio-controller;
- #gpio-cells = <2>;
-
ports {
port@1 {
status = "okay";
@@ -53,31 +53,16 @@
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
- led_lan1_green: lan1_green {
- label = "green:lan1";
- gpios = <&switch0 3 GPIO_ACTIVE_LOW>;
- };
-
led_lan1_orange: lan1_orange {
label = "orange:lan1";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
- led_lan2_green: lan2_green {
- label = "green:lan2";
- gpios = <&switch0 6 GPIO_ACTIVE_LOW>;
- };
-
led_lan2_orange: lan2_orange {
label = "orange:lan2";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
- led_lan3_green: lan3_green {
- label = "green:lan3";
- gpios = <&switch0 12 GPIO_ACTIVE_LOW>;
- };
-
led_lan3_orange: lan3_orange {
label = "orange:lan3";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
@@ -256,9 +241,6 @@
};
&switch0 {
- gpio-controller;
- #gpio-cells = <2>;
-
ports {
port@1 {
status = "okay";
@@ -51,40 +51,6 @@
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
-
- lan1 {
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_LAN;
- function-enumerator = <1>;
- gpios = <&switch0 0 GPIO_ACTIVE_LOW>;
- };
-
- lan2 {
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_LAN;
- function-enumerator = <2>;
- gpios = <&switch0 3 GPIO_ACTIVE_LOW>;
- };
-
- lan3 {
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_LAN;
- function-enumerator = <3>;
- gpios = <&switch0 6 GPIO_ACTIVE_LOW>;
- };
-
- lan4 {
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_LAN;
- function-enumerator = <4>;
- gpios = <&switch0 9 GPIO_ACTIVE_HIGH>;
- };
-
- wan {
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_WAN;
- gpios = <&switch0 12 GPIO_ACTIVE_LOW>;
- };
};
};
@@ -186,9 +152,6 @@
};
&switch0 {
- gpio-controller;
- #gpio-cells = <2>;
-
ports {
port@0 {
status = "okay";
@@ -73,13 +73,6 @@ gnubee,gb-pc2)
linksys,e5600)
ucidef_set_led_netdev "wan" "wan link" "blue:wan" "wan" "link"
;;
-linksys,e7350)
- ucidef_set_led_netdev "lan1" "lan1" "blue:lan-1" "lan1"
- ucidef_set_led_netdev "lan2" "lan2" "blue:lan-2" "lan2"
- ucidef_set_led_netdev "lan3" "lan4" "blue:lan-3" "lan3"
- ucidef_set_led_netdev "lan4" "lan4" "blue:lan-4" "lan4"
- ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
- ;;
linksys,ea6350-v4|\
linksys,ea7300-v1|\
linksys,ea7300-v2|\
@@ -127,9 +120,6 @@ netgear,r7450)
;;
netgear,wax202)
ucidef_set_led_netdev "internet" "Internet" "green:net" "wan"
- ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "lan1"
- ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "lan2"
- ucidef_set_led_netdev "lan3" "LAN3" "green:lan3" "lan3"
;;
oraybox,x3a)
ucidef_set_led_netdev "wan" "wan link" "red:status" "wan"
@@ -174,13 +164,6 @@ yuncore,ax820)
ucidef_set_led_netdev "lan" "LAN" "green:lan" "lan"
ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan"
;;
-zbtlink,zbt-wg1608-16m)
- ucidef_set_led_netdev "lan1" "LAN1" "green:lan-1" "lan1"
- ucidef_set_led_netdev "lan2" "LAN2" "green:lan-2" "lan2"
- ucidef_set_led_netdev "lan3" "LAN3" "green:lan-3" "lan3"
- ucidef_set_led_netdev "lan4" "LAN4" "green:lan-4" "lan4"
- ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan"
- ;;
zyxel,lte3301-plus)
ucidef_set_led_netdev "internet" "internet" "white:internet" "wwan0"
;;
The pins of the MT7530 switch that translate to GPIO 0, 3, 6, 9 and 12 has got a function, by default, which does the same thing as the netdev trigger. Because of bridge offloading on DSA, the netdev trigger won't see the frames between the switch ports whilst the default function will. Do not use the GPIO function on switch pins on devices that fall under this category. Keep it for: mt7621_belkin_rt1800.dts: There's only one LED which is for the wan interface and there's no bridge offloading between the "wan" interface and other interfaces. mt7621_yuncore_ax820.dts: There's no bridge offloading between the "wan" and "lan" interfaces. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> --- .../linux/ramips/dts/mt7621_linksys_e7350.dts | 37 ------------------- .../ramips/dts/mt7621_netgear_wax202.dts | 18 --------- .../ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi | 37 ------------------- .../mt7621/base-files/etc/board.d/01_leds | 17 --------- 4 files changed, 109 deletions(-)