From patchwork Fri Jul 13 21:19:36 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 943829 X-Patchwork-Delegate: openwrt@kresin.me Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (mailfrom) smtp.mailfrom=lists.openwrt.org (client-ip=2607:7c80:54:e::133; helo=bombadil.infradead.org; envelope-from=openwrt-devel-bounces+incoming=patchwork.ozlabs.org@lists.openwrt.org; receiver=) Authentication-Results: ozlabs.org; dmarc=fail (p=none dis=none) header.from=linaro.org Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="ZozGjRHi"; dkim=fail reason="signature verification failed" (1024-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.b="FCj+8JDz"; dkim-atps=neutral Received: from bombadil.infradead.org (bombadil.infradead.org [IPv6:2607:7c80:54:e::133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 41S5PV0Wf9z9rxs for ; Sat, 14 Jul 2018 07:22:54 +1000 (AEST) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:MIME-Version:Cc:List-Subscribe: List-Help:List-Post:List-Archive:List-Unsubscribe:List-Id:Subject:References: In-Reply-To:Message-Id:Date:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=wQP430SoeVSFs6U12yAWsyBcOZqfPMcFyxZgKNMaDe4=; b=ZozGjRHiw9DXFB hlqPZyTRgbmmf39AOiIMmRM7bQ6o6y4hbf9FPsmfnoBuCcoQtIJYSKUcnTMakIn6syjDGvnZGqLlQ 2dY98USuiGkPJ5d0Dh5KfNfQDsD52gwv3LSNvkF2Ixel1u3jYugabDQsh7GbApuaO2LAR8ObmWCQS YjPj5AJRAYNggLqYY5wmirUXHqKXlh2CZH6hrUw6Vi0xBQ/sVObsQN9miuEAZOg1UCN4Fw5d9TsQ3 /wntO8I77zfk/O8wGtozlxiuL6hBfifx2LvaKMVC4t/aAY6y/uxaDmnR+Jtb6fVUJr7GTYguNPUGU X4WakZQac6Rul9ItqmgA==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1fe5Wd-0002c4-9s; Fri, 13 Jul 2018 21:22:51 +0000 Received: from mail-lj1-x243.google.com ([2a00:1450:4864:20::243]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1fe5Vr-0001bF-Dq for openwrt-devel@lists.openwrt.org; Fri, 13 Jul 2018 21:22:05 +0000 Received: by mail-lj1-x243.google.com with SMTP id q5-v6so25493252ljh.12 for ; Fri, 13 Jul 2018 14:21:55 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=n3jsSWHoT67UpfU87reDFbuXuaEsYYK0w8RknCk6TvQ=; b=FCj+8JDzTK4aSMl2kFc3+Ve7OebAdp5ze97tZGtsXq4Zv+AaUqbGnrUbSlaTRZm3xI uFNRFFH+Qr8ctXtueWb5Cy/G3WzCTYNmRuHDm7g6v8Hg+d+jeTwLh9JSW+nBwejkxvgp BjrCr80QsVo3b5gE3D9B2qnSnBz6dr++Zkr28= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=n3jsSWHoT67UpfU87reDFbuXuaEsYYK0w8RknCk6TvQ=; b=qUDLBLwEj/NAeL+1LdVp5XT7suRjZ0FywDhXOI809bmHLdN0VGCIIybXiUKUKIf8GL gzs94CSSIEtS8QXujkg0dyiJK+iaFB6f5Z7PUGlmdT6SWtrZra7ciTC6gdsBqe13LP/6 78MyOglt/yGYUovr7vDJ39CnLRKVHaEAXjjUQS0HHSSRatMjQidgMtcaRYX1/RIb4urq 5XsAtYsnaGdnV9zcCjNOza5tFyQuyjVOgJ14kv8satRqAs8zeN/Azr2fg+Zi15N1/4J4 eyxA7870wN82AaNOtnMgJhGhMNdoz5La2HvYW3ceHxvFnOYZ4RXYwi3BznxC0bFZvV2H E6Sw== X-Gm-Message-State: AOUpUlFOZjQitt0GqSXjwRcJMLwWsBCmoSvf136X1Ox8PEPk2DJHvEi6 1RbfItUn4tB32dIeAWJttlU9XQ== X-Google-Smtp-Source: AAOMgpc9btVtVaYhNL4ia+HWHTTBKKz15H0hlJ8v/vIAPxPkSSidos1V8anX5CyydJSX1waMOW1TXg== X-Received: by 2002:a2e:3a0e:: with SMTP id h14-v6mr4518422lja.20.1531516914146; Fri, 13 Jul 2018 14:21:54 -0700 (PDT) Received: from localhost.localdomain (c-ae7b71d5.014-348-6c756e10.bbcust.telenor.se. [213.113.123.174]) by smtp.gmail.com with ESMTPSA id y6-v6sm3725570ljy.42.2018.07.13.14.21.52 (version=TLS1_2 cipher=ECDHE-RSA-CHACHA20-POLY1305 bits=256/256); Fri, 13 Jul 2018 14:21:53 -0700 (PDT) From: Linus Walleij To: linux-arm-kernel@lists.infradead.org, Hans Ulli Kroll , Florian Fainelli Date: Fri, 13 Jul 2018 23:19:36 +0200 Message-Id: <20180713211936.31820-3-linus.walleij@linaro.org> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20180713211936.31820-1-linus.walleij@linaro.org> References: <20180713211936.31820-1-linus.walleij@linaro.org> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20180713_142203_494754_0BFE1B97 X-CRM114-Status: GOOD ( 19.67 ) X-Spam-Score: 0.1 (/) X-Spam-Report: SpamAssassin version 3.4.1 on bombadil.infradead.org summary: Content analysis details: (0.1 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at http://www.dnswl.org/, no trust [2a00:1450:4864:20:0:0:0:243 listed in] [list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid 0.0 T_DKIM_INVALID DKIM-Signature header exists but is not valid Subject: [OpenWrt-Devel] [PATCH 3/3 v4] ARM: dts: Add devicetree for Storlink/Storm SL93512R X-BeenThere: openwrt-devel@lists.openwrt.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Andrew Lunn , Linus Walleij , LEDE Development List MIME-Version: 1.0 Sender: "openwrt-devel" Errors-To: openwrt-devel-bounces+incoming=patchwork.ozlabs.org@lists.openwrt.org The Storlink Gemini324 EV-Board also known as Storm Semiconductor SL93512R_BRD is ground zero for the Gemini devices. We add a device tree so we can support it, it turns out to be pretty trivial. Signed-off-by: Linus Walleij Reviewed-by: Andrew Lunn --- ChangeLog v3->v4: - Restore lost changes from v1 (sorry about the mess) ChangeLog v2->v3: - Use a fixed link for the ethernet port to the Vitesse DSA router chip. ChangeLog v1->v2: - Rename wrongly named "ethernet-phy" to "mdio" - Drop device_type from the ethernet phy --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/gemini-sl93512r.dts | 328 ++++++++++++++++++++++++++ 2 files changed, 329 insertions(+) create mode 100644 arch/arm/boot/dts/gemini-sl93512r.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 37a3de760d40..a10ef98c6d75 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -200,6 +200,7 @@ dtb-$(CONFIG_ARCH_GEMINI) += \ gemini-dlink-dns-313.dtb \ gemini-nas4220b.dtb \ gemini-rut1xx.dtb \ + gemini-sl93512r.dtb \ gemini-sq201.dtb \ gemini-wbd111.dtb \ gemini-wbd222.dtb diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini-sl93512r.dts new file mode 100644 index 000000000000..ebefb7297379 --- /dev/null +++ b/arch/arm/boot/dts/gemini-sl93512r.dts @@ -0,0 +1,328 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for the Storm Semiconductor SL93512R_BRD + * Gemini reference design, also initially called + * "Gemini324 EV-Board" before Storm acquired Storlink Semiconductor. + * The series were later acquired by Cortina Systems. + */ + +/dts-v1/; + +#include "gemini.dtsi" +#include + +/ { + model = "Storlink Semiconductor Gemini324 EV-Board / Storm Semiconductor SL93512R_BRD"; + compatible = "storlink,gemini324", "storm,sl93512r", "cortina,gemini"; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + /* 64 MB Samsung K4H511638B */ + device_type = "memory"; + reg = <0x00000000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait"; + stdout-path = &uart0; + }; + + gpio_keys { + compatible = "gpio-keys"; + + button-wps { + debounce-interval = <50>; + wakeup-source; + linux,code = ; + label = "WPS"; + /* Conflict with NAND flash */ + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + + button-setup { + debounce-interval = <50>; + wakeup-source; + linux,code = ; + label = "factory reset"; + /* Conflict with NAND flash */ + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + led-green-harddisk { + label = "sq201:green:harddisk"; + /* Conflict with LCD (no problem) */ + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "disk-activity"; + }; + led-green-wireless { + label = "sq201:green:wireless"; + /* Conflict with NAND flash CE0 (no problem) */ + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + /* Uses MDC and MDIO */ + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + /* This is a Marvell 88E1111 ethernet transciever */ + phy0: ethernet-phy@1 { + reg = <1>; + }; + }; + + spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + /* Check pin collisions */ + gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio1 30 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio1 29 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + + switch@0 { + compatible = "vitesse,vsc7385"; + reg = <0>; + /* Specified for 2.5 MHz or below */ + spi-max-frequency = <2500000>; + gpio-controller; + #gpio-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + port@1 { + reg = <1>; + label = "lan2"; + }; + port@2 { + reg = <2>; + label = "lan3"; + }; + port@3 { + reg = <3>; + label = "lan4"; + }; + vsc: port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; + }; + + + soc { + flash@30000000 { + status = "okay"; + /* 16MB of flash */ + reg = <0x30000000 0x01000000>; + + partition@0 { + label = "BOOT"; + reg = <0x00000000 0x00020000>; + read-only; + }; + partition@120000 { + label = "Kern"; + reg = <0x00020000 0x00300000>; + }; + partition@320000 { + label = "Ramdisk"; + reg = <0x00320000 0x00600000>; + }; + partition@920000 { + label = "Application"; + reg = <0x00920000 0x00600000>; + }; + partition@f20000 { + label = "VCTL"; + reg = <0x00f20000 0x00020000>; + read-only; + }; + partition@f40000 { + label = "CurConf"; + reg = <0x00f40000 0x000a0000>; + read-only; + }; + partition@fe0000 { + label = "FIS directory"; + reg = <0x00fe0000 0x00020000>; + read-only; + }; + }; + + syscon: syscon@40000000 { + pinctrl { + /* + * gpio0egrp cover line 16 used by HD LED + * gpio0fgrp cover line 17, 18 used by wireless LED and reset button + * gpio0hgrp cover line 21, 22 used by MDIO for Marvell PHY + * gpio0kgrp cover line 31 used by USB LED + */ + gpio0_default_pins: pinctrl-gpio0 { + mux { + function = "gpio0"; + groups = "gpio0egrp", + "gpio0fgrp", + "gpio0hgrp"; + }; + }; + /* + * gpio1dgrp cover lines used by SPI for + * the Vitesse chip (28-31) + */ + gpio1_default_pins: pinctrl-gpio1 { + mux { + function = "gpio1"; + groups = "gpio1dgrp"; + }; + }; + pinctrl-gmii { + mux { + function = "gmii"; + groups = "gmii_gmac0_grp", "gmii_gmac1_grp"; + }; + /* Control pad skew comes from sl_switch.c in the vendor code */ + conf0 { + pins = "P10 GMAC1 TXC"; + skew-delay = <5>; + }; + conf1 { + pins = "V11 GMAC1 TXEN"; + skew-delay = <7>; + }; + conf2 { + pins = "T11 GMAC1 RXC"; + skew-delay = <8>; + }; + conf3 { + pins = "U11 GMAC1 RXDV"; + skew-delay = <7>; + }; + conf4 { + pins = "V7 GMAC0 TXC"; + skew-delay = <10>; + }; + conf5 { + pins = "P8 GMAC0 TXEN"; + skew-delay = <7>; /* 5 at another place? */ + }; + conf6 { + pins = "T8 GMAC0 RXC"; + skew-delay = <15>; + }; + conf7 { + pins = "R8 GMAC0 RXDV"; + skew-delay = <0>; + }; + conf8 { + /* The data lines all have default skew */ + pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1", + "P9 GMAC0 RXD2", "R9 GMAC0 RXD3", + "R11 GMAC1 RXD0", "P11 GMAC1 RXD1", + "V12 GMAC1 RXD2", "U12 GMAC1 RXD3", + "R10 GMAC1 TXD0", "T10 GMAC1 TXD1", + "U10 GMAC1 TXD2", "V10 GMAC1 TXD3"; + skew-delay = <7>; + }; + /* Appears in sl351x_gmac.c in the vendor code */ + conf9 { + pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1", + "R7 GMAC0 TXD2", "P7 GMAC0 TXD3"; + skew-delay = <5>; + }; + }; + }; + }; + + /* Both interfaces brought out on SATA connectors */ + sata: sata@46000000 { + cortina,gemini-ata-muxmode = <0>; + cortina,gemini-enable-sata-bridge; + status = "okay"; + }; + + gpio0: gpio@4d000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_default_pins>; + }; + + gpio1: gpio@4e000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_default_pins>; + }; + + pci@50000000 { + status = "okay"; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = + <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ + <0x4800 0 0 2 &pci_intc 1>, + <0x4800 0 0 3 &pci_intc 2>, + <0x4800 0 0 4 &pci_intc 3>, + <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ + <0x5000 0 0 2 &pci_intc 2>, + <0x5000 0 0 3 &pci_intc 3>, + <0x5000 0 0 4 &pci_intc 0>, + <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ + <0x5800 0 0 2 &pci_intc 3>, + <0x5800 0 0 3 &pci_intc 0>, + <0x5800 0 0 4 &pci_intc 1>, + <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ + <0x6000 0 0 2 &pci_intc 0>, + <0x6000 0 0 3 &pci_intc 1>, + <0x6000 0 0 4 &pci_intc 2>; + }; + + ethernet@60000000 { + status = "okay"; + + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet-port@1 { + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + + ata@63000000 { + status = "okay"; + }; + + ata@63400000 { + status = "okay"; + }; + }; +};