Message ID | 20150116185726.GA13845@sottospazio.it |
---|---|
State | Accepted |
Headers | show |
On 16/01/2015 19:57, Gianluca Anzolin wrote: > Hi, > > I noticed that on Archer C7 the 2.4Ghz and 5Ghz leds are swapped: > this is the relevant section of /etc/config/system > > config led 'led_wlan2g' option name 'WLAN2G' option sysfs > 'tp-link:blue:wlan2g' option trigger 'phy0tpt' > > config led 'led_wlan5g' option name 'WLAN5G' option sysfs > 'tp-link:blue:wlan5g' option trigger 'phy1tpt' > > However on Archer C7 the 5G interface is on phy0 and 2.4G is on > phy1. > > I've yet to find where (and how) this section is autogenerated but > I noticed that the phy0pt trigger doesn't even exist on my system. > look at target/linux/ar71xx/base-files/etc/uci-defaults/01_leds > There is also a bugreport in the bug tracking system pointing at > this issue: https://dev.openwrt.org/ticket/18188 > > I looked at the ath9k implementation and I've come up with the > attached patch. > > Do you think a patch like this is acceptable? > it is not > Thank you, > > Gianluca > > > > _______________________________________________ openwrt-devel > mailing list openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >
Il 17/01/2015 07:41, John Crispin ha scritto: >> There is also a bugreport in the bug tracking system pointing at >> this issue: https://dev.openwrt.org/ticket/18188 >> >> I looked at the ath9k implementation and I've come up with the >> attached patch. >> >> Do you think a patch like this is acceptable? >> > > > it is not do you care to elaborate? what's wrong with it? Gianluca
On 17/01/2015 08:42, Gianluca Anzolin wrote: > Il 17/01/2015 07:41, John Crispin ha scritto: >>> There is also a bugreport in the bug tracking system pointing at >>> this issue: https://dev.openwrt.org/ticket/18188 >>> >>> I looked at the ath9k implementation and I've come up with the >>> attached patch. >>> >>> Do you think a patch like this is acceptable? >>> >> >> >> it is not > > do you care to elaborate? what's wrong with it? > > Gianluca > _____________________________ imho fixing target/linux/ar71xx/base-files/etc/uci-defaults/01_leds is enough nd not driver patch is required
Il 17/01/2015 13:53, John Crispin ha scritto: > > On 17/01/2015 08:42, Gianluca Anzolin wrote: >> Il 17/01/2015 07:41, John Crispin ha scritto: >>>> There is also a bugreport in the bug tracking system pointing at >>>> this issue: https://dev.openwrt.org/ticket/18188 >>>> >>>> I looked at the ath9k implementation and I've come up with the >>>> attached patch. >>>> >>>> Do you think a patch like this is acceptable? >>>> >>> >>> it is not >> do you care to elaborate? what's wrong with it? >> >> Gianluca >> _____________________________ > imho fixing target/linux/ar71xx/base-files/etc/uci-defaults/01_leds is > enough nd not driver patch is required > I don't get it, how do you create a throughput trigger by changing a script? Gianluca
On 17/01/2015 19:19, Gianluca Anzolin wrote: > Il 17/01/2015 13:53, John Crispin ha scritto: >> >> On 17/01/2015 08:42, Gianluca Anzolin wrote: >>> Il 17/01/2015 07:41, John Crispin ha scritto: >>>>> There is also a bugreport in the bug tracking system >>>>> pointing at this issue: >>>>> https://dev.openwrt.org/ticket/18188 >>>>> >>>>> I looked at the ath9k implementation and I've come up with >>>>> the attached patch. >>>>> >>>>> Do you think a patch like this is acceptable? >>>>> >>>> >>>> it is not >>> do you care to elaborate? what's wrong with it? >>> >>> Gianluca _____________________________ >> imho fixing >> target/linux/ar71xx/base-files/etc/uci-defaults/01_leds is enough >> nd not driver patch is required >> > I don't get it, how do you create a throughput trigger by changing > a script? ok, i misread your patch. the first half says the leds are swapped so i pointed you at the code that sets up the leds. i will talk to felix about the patch > > Gianluca _______________________________________________ > openwrt-devel mailing list openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >
From c0f16f5008b3ad52f8a0c8554503beb655e11928 Mon Sep 17 00:00:00 2001 From: Gianluca Anzolin <gianluca@sottospazio.it> Date: Fri, 16 Jan 2015 19:19:30 +0100 Subject: [PATCH] ath10k: add throughput led trigger This patch add a throughput led trigger for the ath10k wifi driver. The throughputs in the table are chosen to be linear in a logarithmic scale. Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it> --- .../patches/930-ath10k_add_tpt_led_trigger.patch | 37 ++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch diff --git a/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch b/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch new file mode 100644 index 0000000..150e008 --- /dev/null +++ b/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch @@ -0,0 +1,37 @@ +--- a/drivers/net/wireless/ath/ath10k/mac.c ++++ b/drivers/net/wireless/ath/ath10k/mac.c +@@ -4824,6 +4824,21 @@ struct ath10k_vif *ath10k_get_arvif(stru + return arvif_iter.arvif; + } + ++#ifdef CPTCFG_MAC80211_LEDS ++static const struct ieee80211_tpt_blink ath10k_tpt_blink[] = { ++ { .throughput = 0 * 1024, .blink_time = 334 }, ++ { .throughput = 1 * 1024, .blink_time = 260 }, ++ { .throughput = 2 * 1024, .blink_time = 220 }, ++ { .throughput = 5 * 1024, .blink_time = 190 }, ++ { .throughput = 10 * 1024, .blink_time = 170 }, ++ { .throughput = 25 * 1024, .blink_time = 150 }, ++ { .throughput = 54 * 1024, .blink_time = 130 }, ++ { .throughput = 120 * 1024, .blink_time = 110 }, ++ { .throughput = 265 * 1024, .blink_time = 80 }, ++ { .throughput = 586 * 1024, .blink_time = 50 }, ++}; ++#endif ++ + int ath10k_mac_register(struct ath10k *ar) + { + struct ieee80211_supported_band *band; +@@ -4965,6 +4980,12 @@ int ath10k_mac_register(struct ath10k *a + goto err_free; + } + ++#if CPTCFG_MAC80211_LEDS ++ ieee80211_create_tpt_led_trigger(ar->hw, ++ IEEE80211_TPT_LEDTRIG_FL_RADIO, ath10k_tpt_blink, ++ ARRAY_SIZE(ath10k_tpt_blink)); ++#endif ++ + ret = ieee80211_register_hw(ar->hw); + if (ret) { + ath10k_err(ar, "failed to register ieee80211: %d\n", ret); -- 2.2.2