Message ID | 1429357082-59213-1-git-send-email-noltari@gmail.com |
---|---|
State | Accepted |
Delegated to: | Jonas Gorski |
Headers | show |
diff --git a/target/linux/brcm63xx/patches-3.18/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch b/target/linux/brcm63xx/patches-3.18/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch index 40bbe08..deda928 100644 --- a/target/linux/brcm63xx/patches-3.18/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch +++ b/target/linux/brcm63xx/patches-3.18/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch @@ -66,7 +66,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org> val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG); if (is_on) -@@ -49,5 +61,90 @@ void bcm63xx_usb_priv_select_pullup(u32 +@@ -49,5 +61,90 @@ void bcm63xx_usb_priv_select_pullup(u32 else val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG); diff --git a/target/linux/brcm63xx/patches-3.18/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch b/target/linux/brcm63xx/patches-3.18/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch index b949694..180d842 100644 --- a/target/linux/brcm63xx/patches-3.18/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch +++ b/target/linux/brcm63xx/patches-3.18/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch @@ -11,7 +11,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c -@@ -246,7 +246,8 @@ static int m25p_probe(struct spi_device +@@ -246,7 +246,8 @@ static int m25p_probe(struct spi_device ppdata.of_node = spi->dev.of_node; diff --git a/target/linux/brcm63xx/patches-3.18/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch b/target/linux/brcm63xx/patches-3.18/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch index 740fb2d..96c8c79 100644 --- a/target/linux/brcm63xx/patches-3.18/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch +++ b/target/linux/brcm63xx/patches-3.18/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch @@ -58,7 +58,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> static int m25p80_erase(struct spi_nor *nor, loff_t offset) { struct m25p *flash = nor->priv; -@@ -240,6 +264,9 @@ static int m25p_probe(struct spi_device +@@ -240,6 +264,9 @@ static int m25p_probe(struct spi_device else flash_name = spi->modalias; diff --git a/target/linux/brcm63xx/patches-3.18/339-MIPS-BCM63XX-add-support-for-BCM63268.patch b/target/linux/brcm63xx/patches-3.18/339-MIPS-BCM63XX-add-support-for-BCM63268.patch index 22ceeea..bee8a10 100644 --- a/target/linux/brcm63xx/patches-3.18/339-MIPS-BCM63XX-add-support-for-BCM63268.patch +++ b/target/linux/brcm63xx/patches-3.18/339-MIPS-BCM63XX-add-support-for-BCM63268.patch @@ -46,7 +46,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org> val = bcm_mpi_readl(MPI_CSBASE_REG(0)); --- a/arch/mips/bcm63xx/clk.c +++ b/arch/mips/bcm63xx/clk.c -@@ -133,6 +133,8 @@ static void enetsw_set(struct clk *clk, +@@ -133,6 +133,8 @@ static void enetsw_set(struct clk *clk, CKCTL_6368_SWPKT_USB_EN | CKCTL_6368_SWPKT_SAR_EN, enable); @@ -107,7 +107,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org> } static struct clk clk_pcie = { -@@ -386,9 +400,11 @@ struct clk *clk_get(struct device *dev, +@@ -386,9 +400,11 @@ struct clk *clk_get(struct device *dev, return &clk_periph; if ((BCMCPU_IS_3368() || BCMCPU_IS_6358()) && !strcmp(id, "pcm")) return &clk_pcm; @@ -328,7 +328,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org> /* * core reset bits */ -@@ -156,6 +170,10 @@ static const u32 bcm6368_reset_bits[] = +@@ -156,6 +170,10 @@ static const u32 bcm6368_reset_bits[] = __GEN_RESET_BITS_TABLE(6368) }; diff --git a/target/linux/brcm63xx/patches-3.18/341-MIPS-BCM63XX-add-support-for-BCM6318.patch b/target/linux/brcm63xx/patches-3.18/341-MIPS-BCM63XX-add-support-for-BCM6318.patch index ead4ee0..0bb2fa7 100644 --- a/target/linux/brcm63xx/patches-3.18/341-MIPS-BCM63XX-add-support-for-BCM6318.patch +++ b/target/linux/brcm63xx/patches-3.18/341-MIPS-BCM63XX-add-support-for-BCM6318.patch @@ -251,7 +251,7 @@ Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318 #define BCM6328_RESET_SPI SOFTRESET_6328_SPI_MASK #define BCM6328_RESET_ENET 0 #define BCM6328_RESET_USBH SOFTRESET_6328_USBH_MASK -@@ -147,6 +164,10 @@ static const u32 bcm3368_reset_bits[] = +@@ -147,6 +164,10 @@ static const u32 bcm3368_reset_bits[] = __GEN_RESET_BITS_TABLE(3368) }; diff --git a/target/linux/brcm63xx/patches-3.18/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch b/target/linux/brcm63xx/patches-3.18/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch index 3ac08b4..b923c1e 100644 --- a/target/linux/brcm63xx/patches-3.18/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch +++ b/target/linux/brcm63xx/patches-3.18/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch @@ -53,7 +53,7 @@ Subject: [PATCH 53/53] MIPS: BCM63XX: add PCIe support for BCM6318 } static struct clk clk_pcie = { -@@ -405,7 +422,7 @@ struct clk *clk_get(struct device *dev, +@@ -405,7 +422,7 @@ struct clk *clk_get(struct device *dev, if ((BCMCPU_IS_6362() || BCMCPU_IS_6368() || BCMCPU_IS_63268()) && !strcmp(id, "ipsec")) return &clk_ipsec; diff --git a/target/linux/brcm63xx/patches-3.18/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch b/target/linux/brcm63xx/patches-3.18/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch index 384702c..d36c2bf 100644 --- a/target/linux/brcm63xx/patches-3.18/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch +++ b/target/linux/brcm63xx/patches-3.18/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch @@ -42,7 +42,7 @@ if (enable) msleep(100); -@@ -405,9 +413,9 @@ struct clk *clk_get(struct device *dev, +@@ -405,9 +413,9 @@ struct clk *clk_get(struct device *dev, return &clk_enetsw; if (!strcmp(id, "ephy")) return &clk_ephy; diff --git a/target/linux/brcm63xx/patches-3.18/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch b/target/linux/brcm63xx/patches-3.18/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch index 7e408f6..b4ff86d 100644 --- a/target/linux/brcm63xx/patches-3.18/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch +++ b/target/linux/brcm63xx/patches-3.18/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch @@ -14,7 +14,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org> --- a/arch/mips/bcm63xx/dev-flash.c +++ b/arch/mips/bcm63xx/dev-flash.c -@@ -57,6 +57,12 @@ static struct platform_device mtd_dev = +@@ -57,6 +57,12 @@ static struct platform_device mtd_dev = }, }; diff --git a/target/linux/brcm63xx/patches-3.18/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch b/target/linux/brcm63xx/patches-3.18/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch index 450bc1d..d2fe588 100644 --- a/target/linux/brcm63xx/patches-3.18/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch +++ b/target/linux/brcm63xx/patches-3.18/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch @@ -20,7 +20,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org> --- a/arch/mips/bcm63xx/Makefile +++ b/arch/mips/bcm63xx/Makefile -@@ -2,7 +2,7 @@ obj-y += clk.o cpu.o cs.o gpio.o irq.o +@@ -2,7 +2,7 @@ obj-y += clk.o cpu.o cs.o gpio.o irq.o setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \ dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \ dev-wdt.o dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o \ diff --git a/target/linux/brcm63xx/patches-3.18/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch b/target/linux/brcm63xx/patches-3.18/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch index 0c4a9be..4e97005 100644 --- a/target/linux/brcm63xx/patches-3.18/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch +++ b/target/linux/brcm63xx/patches-3.18/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch @@ -23,7 +23,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org> .revision = 0x02, .board_rev = 0x17, .country_code = 0x0, -@@ -43,6 +43,8 @@ static struct ssb_sprom bcm63xx_sprom = +@@ -43,6 +43,8 @@ static struct ssb_sprom bcm63xx_sprom = .boardflags_hi = 0x0000, }; diff --git a/target/linux/brcm63xx/patches-3.18/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch b/target/linux/brcm63xx/patches-3.18/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch index 6475f9f..f1093a2 100644 --- a/target/linux/brcm63xx/patches-3.18/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch +++ b/target/linux/brcm63xx/patches-3.18/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch @@ -49,7 +49,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org> static __initconst u16 bcm4306_sprom[] = { 0x4001, 0x0000, 0x0453, 0x14e4, 0x4320, 0x8000, 0x0002, 0x0002, 0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, -@@ -158,10 +159,12 @@ static __initconst u16 bcm43222_sprom[] +@@ -158,10 +159,12 @@ static __initconst u16 bcm43222_sprom[] 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0008, }; diff --git a/target/linux/brcm63xx/patches-3.18/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch b/target/linux/brcm63xx/patches-3.18/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch index 5c0abb9..d3d58eb 100644 --- a/target/linux/brcm63xx/patches-3.18/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch +++ b/target/linux/brcm63xx/patches-3.18/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch @@ -14,7 +14,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org> --- a/arch/mips/bcm63xx/sprom.c +++ b/arch/mips/bcm63xx/sprom.c -@@ -161,6 +161,226 @@ static __initconst u16 bcm43222_sprom[] +@@ -161,6 +161,226 @@ static __initconst u16 bcm43222_sprom[] }; #endif /* CONFIG_SSB_PCIHOST */ diff --git a/target/linux/brcm63xx/patches-3.18/366-MIPS-add-support-for-vmlinux.bin-appended-DTB.patch b/target/linux/brcm63xx/patches-3.18/366-MIPS-add-support-for-vmlinux.bin-appended-DTB.patch index ff455dd..4e6296e 100644 --- a/target/linux/brcm63xx/patches-3.18/366-MIPS-add-support-for-vmlinux.bin-appended-DTB.patch +++ b/target/linux/brcm63xx/patches-3.18/366-MIPS-add-support-for-vmlinux.bin-appended-DTB.patch @@ -70,7 +70,7 @@ Completely untested on anything except MIPS32 / big endian. menu "Executable file formats" --- a/arch/mips/kernel/head.S +++ b/arch/mips/kernel/head.S -@@ -100,6 +100,22 @@ NESTED(kernel_entry, 16, sp) # kernel +@@ -100,6 +100,22 @@ NESTED(kernel_entry, 16, sp) # kernel jr t0 0: @@ -93,7 +93,7 @@ Completely untested on anything except MIPS32 / big endian. PTR_LA t0, __bss_start # clear .bss LONG_S zero, (t0) PTR_LA t1, __bss_stop - LONGSIZE -@@ -113,6 +129,10 @@ NESTED(kernel_entry, 16, sp) # kernel +@@ -113,6 +129,10 @@ NESTED(kernel_entry, 16, sp) # kernel LONG_S a2, fw_arg2 LONG_S a3, fw_arg3 diff --git a/target/linux/brcm63xx/patches-3.18/376-net-bcm63xx_enet-use-named-gpio-for-ephy-reset-gpio.patch b/target/linux/brcm63xx/patches-3.18/376-net-bcm63xx_enet-use-named-gpio-for-ephy-reset-gpio.patch index 6d19cc0..5436ad3 100644 --- a/target/linux/brcm63xx/patches-3.18/376-net-bcm63xx_enet-use-named-gpio-for-ephy-reset-gpio.patch +++ b/target/linux/brcm63xx/patches-3.18/376-net-bcm63xx_enet-use-named-gpio-for-ephy-reset-gpio.patch @@ -18,7 +18,7 @@ Allow using a named optional gpio for ephy reset gpio registration. #include <bcm63xx_dev_enet.h> #include "bcm63xx_enet.h" -@@ -2848,10 +2849,15 @@ static int bcm_enet_shared_probe(struct +@@ -2848,10 +2849,15 @@ static int bcm_enet_shared_probe(struct { struct resource *res; void __iomem *p[3]; @@ -34,7 +34,7 @@ Allow using a named optional gpio for ephy reset gpio registration. for (i = 0; i < 3; i++) { res = platform_get_resource(pdev, IORESOURCE_MEM, i); p[i] = devm_ioremap_resource(&pdev->dev, res); -@@ -2861,6 +2867,9 @@ static int bcm_enet_shared_probe(struct +@@ -2861,6 +2867,9 @@ static int bcm_enet_shared_probe(struct memcpy(bcm_enet_shared_base, p, sizeof(bcm_enet_shared_base)); diff --git a/target/linux/brcm63xx/patches-3.18/414-MTD-m25p80-allow-passing-pp_data.patch b/target/linux/brcm63xx/patches-3.18/414-MTD-m25p80-allow-passing-pp_data.patch index b7bf57f..b218e46 100644 --- a/target/linux/brcm63xx/patches-3.18/414-MTD-m25p80-allow-passing-pp_data.patch +++ b/target/linux/brcm63xx/patches-3.18/414-MTD-m25p80-allow-passing-pp_data.patch @@ -10,7 +10,7 @@ Subject: [PATCH 64/79] MTD: m25p80: allow passing pp_data --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c -@@ -267,6 +267,9 @@ static int m25p_probe(struct spi_device +@@ -267,6 +267,9 @@ static int m25p_probe(struct spi_device if (data) flash->max_transfer_len = data->max_transfer_len; diff --git a/target/linux/brcm63xx/patches-3.18/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch b/target/linux/brcm63xx/patches-3.18/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch index 7a7c825..b36c1b8 100644 --- a/target/linux/brcm63xx/patches-3.18/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch +++ b/target/linux/brcm63xx/patches-3.18/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch @@ -13,7 +13,7 @@ Subject: [PATCH 61/72] BCM63XX: add a fixup for ath9k devices --- a/arch/mips/bcm63xx/Makefile +++ b/arch/mips/bcm63xx/Makefile -@@ -2,7 +2,7 @@ obj-y += clk.o cpu.o cs.o gpio.o irq.o +@@ -2,7 +2,7 @@ obj-y += clk.o cpu.o cs.o gpio.o irq.o setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \ dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \ dev-wdt.o dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o \ diff --git a/target/linux/brcm63xx/patches-3.18/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch b/target/linux/brcm63xx/patches-3.18/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch index bff489b..a0b080e 100644 --- a/target/linux/brcm63xx/patches-3.18/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch +++ b/target/linux/brcm63xx/patches-3.18/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch @@ -17,7 +17,7 @@ Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices --- a/arch/mips/bcm63xx/Makefile +++ b/arch/mips/bcm63xx/Makefile -@@ -2,7 +2,7 @@ obj-y += clk.o cpu.o cs.o gpio.o irq.o +@@ -2,7 +2,7 @@ obj-y += clk.o cpu.o cs.o gpio.o irq.o setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \ dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \ dev-wdt.o dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o \ diff --git a/target/linux/brcm63xx/patches-3.18/560-board_963268gu_p300.patch b/target/linux/brcm63xx/patches-3.18/560-board_963268gu_p300.patch index 8eef982..9c0f7b7 100644 --- a/target/linux/brcm63xx/patches-3.18/560-board_963268gu_p300.patch +++ b/target/linux/brcm63xx/patches-3.18/560-board_963268gu_p300.patch @@ -79,7 +79,7 @@ { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, #endif #ifdef CONFIG_BCM63XX_CPU_63268 -+ { .compatible = "brcm,bcm963268bu_p300", .data = &board_963268bu_p300, }, ++ { .compatible = "brcm,bcm963268bu_p300", .data = &board_963268bu_p300, }, { .compatible = "inteno,vg50", .data = &board_vw6339gu, }, #endif #endif /* CONFIG_OF */ diff --git a/target/linux/brcm63xx/patches-3.18/561-board_WAP-5813n.patch b/target/linux/brcm63xx/patches-3.18/561-board_WAP-5813n.patch index 27d925c..2be0091 100644 --- a/target/linux/brcm63xx/patches-3.18/561-board_WAP-5813n.patch +++ b/target/linux/brcm63xx/patches-3.18/561-board_WAP-5813n.patch @@ -91,4 +91,4 @@ + { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, #endif #ifdef CONFIG_BCM63XX_CPU_63268 - { .compatible = "brcm,bcm963268bu_p300", .data = &board_963268bu_p300, }, + { .compatible = "brcm,bcm963268bu_p300", .data = &board_963268bu_p300, }, diff --git a/target/linux/brcm63xx/patches-3.18/564-board_P870HW-51a_v2.patch b/target/linux/brcm63xx/patches-3.18/564-board_P870HW-51a_v2.patch index bc2b115..8ffc842 100644 --- a/target/linux/brcm63xx/patches-3.18/564-board_P870HW-51a_v2.patch +++ b/target/linux/brcm63xx/patches-3.18/564-board_P870HW-51a_v2.patch @@ -65,4 +65,4 @@ + { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, #endif #ifdef CONFIG_BCM63XX_CPU_63268 - { .compatible = "brcm,bcm963268bu_p300", .data = &board_963268bu_p300, }, + { .compatible = "brcm,bcm963268bu_p300", .data = &board_963268bu_p300, }, diff --git a/target/linux/brcm63xx/profiles/broadcom.mk b/target/linux/brcm63xx/profiles/broadcom.mk index a8d8bfb..8a06a2d 100644 --- a/target/linux/brcm63xx/profiles/broadcom.mk +++ b/target/linux/brcm63xx/profiles/broadcom.mk @@ -24,7 +24,7 @@ endef $(eval $(call Profile,BCM96318REF_P300)) define Profile/BCM963268BU_P300 - NAME:=Broadcom BCM96328BU_P300 reference board + NAME:=Broadcom BCM963268BU_P300 reference board PACKAGES:= kmod-usb-ohci kmod-usb2 kmod-bcm63xx-udc endef define Profile/BCM963268BU_P300/Description
- Fix profile name. - Rremove whitespace on board patch. - Refresh patches. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> --- .../103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch | 2 +- .../202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch | 2 +- .../203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch | 2 +- .../patches-3.18/339-MIPS-BCM63XX-add-support-for-BCM63268.patch | 6 +++--- .../patches-3.18/341-MIPS-BCM63XX-add-support-for-BCM6318.patch | 2 +- .../343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch | 2 +- .../patches-3.18/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch | 2 +- .../355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch | 2 +- .../356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch | 2 +- .../359-MIPS-BCM63XX-allow-different-types-of-sprom.patch | 2 +- .../362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch | 2 +- .../363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch | 2 +- .../366-MIPS-add-support-for-vmlinux.bin-appended-DTB.patch | 4 ++-- .../376-net-bcm63xx_enet-use-named-gpio-for-ephy-reset-gpio.patch | 4 ++-- .../patches-3.18/414-MTD-m25p80-allow-passing-pp_data.patch | 2 +- .../patches-3.18/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch | 2 +- .../patches-3.18/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch | 2 +- target/linux/brcm63xx/patches-3.18/560-board_963268gu_p300.patch | 2 +- target/linux/brcm63xx/patches-3.18/561-board_WAP-5813n.patch | 2 +- target/linux/brcm63xx/patches-3.18/564-board_P870HW-51a_v2.patch | 2 +- target/linux/brcm63xx/profiles/broadcom.mk | 2 +- 21 files changed, 25 insertions(+), 25 deletions(-)