Message ID | 20201215164128.13153-1-sunil.pai.g@intel.com |
---|---|
State | Superseded |
Headers | show |
Series | [ovs-dev,v4] dpdk: Update to use DPDK v20.11. | expand |
> From: Ian Stokes <ian.stokes@intel.com> > Thanks for working and sending this Sunil. @Ilya, does this resolve your concerns WRT the pkg-config check and ARM build in travis? Regards Ian > This commit adds support for DPDK v20.11, it includes the following > changes. > > 1. travis: Remove explicit DPDK kmods configuration. > 2. sparse: Fix build with 20.05 DPDK tracepoints. > 3. netdev-dpdk: Remove experimental API flag. > > > http://patchwork.ozlabs.org/project/openvswitch/list/?series=173216&state=* > > 4. sparse: Update to DPDK 20.05 trace point header. > > > http://patchwork.ozlabs.org/project/openvswitch/list/?series=179604&state=* > > 5. sparse: Fix build with DPDK 20.08. > > > http://patchwork.ozlabs.org/project/openvswitch/list/?series=200181&state=* > > 6. build: Add support for DPDK meson build. > > > http://patchwork.ozlabs.org/project/openvswitch/list/?series=199138&state=* > > 7. netdev-dpdk: Remove usage of RTE_ETH_DEV_CLOSE_REMOVE flag. > > > http://patchwork.ozlabs.org/project/openvswitch/list/?series=207850&state=* > > 8. netdev-dpdk: Fix build with 20.11-rc1. > > > http://patchwork.ozlabs.org/project/openvswitch/list/?series=209006&state=* > > 9. sparse: Fix __ATOMIC_* redefinition errors > > > http://patchwork.ozlabs.org/project/openvswitch/list/?series=209452&state=* > > 10. build: Remove DPDK make build references. > > > http://patchwork.ozlabs.org/project/openvswitch/list/?series=216682&state=* > > For credit all authors of the original commits to 'dpdk-latest' with the > above changes have been added as co-authors for this commit. > > Signed-off-by: David Marchand <david.marchand@redhat.com> > Co-authored-by: David Marchand <david.marchand@redhat.com> > Signed-off-by: Sunil Pai G <sunil.pai.g@intel.com> > Co-authored-by: Sunil Pai G <sunil.pai.g@intel.com> > Signed-off-by: Eli Britstein <elibr@nvidia.com> > Co-authored-by: Eli Britstein <elibr@nvidia.com> > Tested-by: Harry van Haaren <harry.van.haaren@intel.com> > Tested-by: Govindharajan, Hariprasad <hariprasad.govindharajan@intel.com> > Signed-off-by: Ian Stokes <ian.stokes@intel.com> > > --- > v3 -> v4 > * Update DPDK documentation links to 20.11 > * Add pkg-config output check when using static DPDK libs. > * Change the regex to strip -march from DPDK for x86 and arm. > > v2 -> v3 > * Remove GHA others write removal. > * Strip march from pkg-config h=which is forced by DPDK. > > RFC v1 -> v2 > * Removed RFC tag. > * Rebased to head of master. > * Modified GHA build scripts to install required python packages. > * Modified URLs to use versioned 20.11 links. > * Removed unrequired reformat in travis.yml. > * Modified GHA worflow buil-and-test.yml to remove others write > permission to $HOME in prepare step. > --- > .ci/linux-build.sh | 48 +++++++---- > .ci/linux-prepare.sh | 1 + > .github/workflows/build-and-test.yml | 5 +- > .travis.yml | 3 + > Documentation/faq/releases.rst | 2 +- > Documentation/intro/install/afxdp.rst | 2 +- > Documentation/intro/install/dpdk.rst | 68 ++++++++------- > Documentation/topics/dpdk/phy.rst | 22 +++-- > Documentation/topics/dpdk/vdev.rst | 2 +- > Documentation/topics/dpdk/vhost-user.rst | 20 +---- > Documentation/topics/testing.rst | 2 +- > Documentation/topics/userspace-tso.rst | 2 +- > NEWS | 1 + > acinclude.m4 | 102 ++++++++++++----------- > include/sparse/automake.mk | 2 + > include/sparse/rte_mbuf.h | 29 +++++++ > include/sparse/rte_trace_point.h | 28 +++++++ > lib/dpdk.c | 2 +- > lib/netdev-dpdk.c | 20 +---- > 19 files changed, 217 insertions(+), 144 deletions(-) > create mode 100644 include/sparse/rte_mbuf.h > create mode 100644 include/sparse/rte_trace_point.h > > diff --git a/.ci/linux-build.sh b/.ci/linux-build.sh > index 16102ac94..3e5136fd4 100755 > --- a/.ci/linux-build.sh > +++ b/.ci/linux-build.sh > @@ -87,17 +87,29 @@ function install_dpdk() > { > local DPDK_VER=$1 > local VERSION_FILE="dpdk-dir/travis-dpdk-cache-version" > + local DPDK_OPTS="" > + local DPDK_LIB="" > > if [ -z "$TRAVIS_ARCH" ] || > [ "$TRAVIS_ARCH" == "amd64" ]; then > - TARGET="x86_64-native-linuxapp-gcc" > + DPDK_LIB=$(pwd)/dpdk-dir/build/lib/x86_64-linux-gnu > elif [ "$TRAVIS_ARCH" == "aarch64" ]; then > - TARGET="arm64-armv8a-linuxapp-gcc" > + DPDK_LIB=$(pwd)/dpdk-dir/build/lib/aarch64-linux-gnu > else > echo "Target is unknown" > exit 1 > fi > > + if [ "$DPDK_SHARED" ]; then > + EXTRA_OPTS="$EXTRA_OPTS --with-dpdk=shared" > + export LD_LIBRARY_PATH=$DPDK_LIB/:$LD_LIBRARY_PATH > + else > + EXTRA_OPTS="$EXTRA_OPTS --with-dpdk=static" > + fi > + > + # Export the following path for pkg-config to find the .pc file. > + export PKG_CONFIG_PATH=$DPDK_LIB/pkgconfig/:$PKG_CONFIG_PATH > + > if [ "${DPDK_VER##refs/*/}" != "${DPDK_VER}" ]; then > # Avoid using cache for git tree build. > rm -rf dpdk-dir > @@ -110,7 +122,8 @@ function install_dpdk() > if [ -f "${VERSION_FILE}" ]; then > VER=$(cat ${VERSION_FILE}) > if [ "${VER}" = "${DPDK_VER}" ]; then > - EXTRA_OPTS="${EXTRA_OPTS} --with-dpdk=$(pwd)/dpdk-dir/build" > + # Update the library paths. > + sudo ldconfig > echo "Found cached DPDK ${VER} build in $(pwd)/dpdk-dir" > return > fi > @@ -124,23 +137,24 @@ function install_dpdk() > pushd dpdk-dir > fi > > - make config CC=gcc T=$TARGET > + # Switching to 'default' machine to make dpdk-dir cache usable on > + # different CPUs. We can't be sure that all CI machines are exactly same. > + DPDK_OPTS="$DPDK_OPTS -Dmachine=default" > > - if [ "$DPDK_SHARED" ]; then > - sed -i '/CONFIG_RTE_BUILD_SHARED_LIB=n/s/=n/=y/' build/.config > - export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$(pwd)/$TARGET/lib > - fi > + # Disable building DPDK unit tests. Not needed for OVS build or tests. > + DPDK_OPTS="$DPDK_OPTS -Dtests=false" > + > + # Install DPDK using prefix. > + DPDK_OPTS="$DPDK_OPTS --prefix=$(pwd)/build" > + > + CC=gcc meson $DPDK_OPTS build > + ninja -C build > + ninja -C build install > > - # Disable building DPDK kernel modules. Not needed for OVS build or tests. > - sed -i '/CONFIG_RTE_EAL_IGB_UIO=y/s/=y/=n/' build/.config > - sed -i '/CONFIG_RTE_KNI_KMOD=y/s/=y/=n/' build/.config > + # Update the library paths. > + sudo ldconfig > > - # Switching to 'default' machine to make dpdk-dir cache usable on different > - # CPUs. We can't be sure that all CI machines are exactly same. > - sed -i '/CONFIG_RTE_MACHINE="native"/s/="native"/="default"/' > build/.config > > - make -j4 CC=gcc EXTRA_CFLAGS='-fPIC' > - EXTRA_OPTS="$EXTRA_OPTS --with-dpdk=$(pwd)/build" > echo "Installed DPDK source in $(pwd)" > popd > echo "${DPDK_VER}" > ${VERSION_FILE} > @@ -187,7 +201,7 @@ fi > > if [ "$DPDK" ] || [ "$DPDK_SHARED" ]; then > if [ -z "$DPDK_VER" ]; then > - DPDK_VER="19.11.2" > + DPDK_VER="20.11" > fi > install_dpdk $DPDK_VER > if [ "$CC" = "clang" ]; then > diff --git a/.ci/linux-prepare.sh b/.ci/linux-prepare.sh > index fea905a83..69a40011f 100755 > --- a/.ci/linux-prepare.sh > +++ b/.ci/linux-prepare.sh > @@ -22,6 +22,7 @@ cd .. > > pip3 install --disable-pip-version-check --user flake8 hacking > pip3 install --user --upgrade docutils > +pip3 install --user 'meson==0.47.1' > > if [ "$M32" ]; then > # Installing 32-bit libraries. > diff --git a/.github/workflows/build-and-test.yml b/.github/workflows/build- > and-test.yml > index 847fd3150..c83066138 100644 > --- a/.github/workflows/build-and-test.yml > +++ b/.github/workflows/build-and-test.yml > @@ -8,7 +8,8 @@ jobs: > dependencies: | > automake libtool gcc bc libjemalloc1 libjemalloc-dev \ > libssl-dev llvm-dev libelf-dev libnuma-dev libpcap-dev \ > - python3-openssl python3-pip python3-sphinx \ > + ninja-build python3-openssl python3-pip \ > + python3-setuptools python3-sphinx python3-wheel \ > selinux-policy-dev > deb_dependencies: | > linux-headers-$(uname -r) build-essential fakeroot devscripts equivs > @@ -146,7 +147,7 @@ jobs: > run: ./.ci/linux-prepare.sh > > - name: build > - run: PATH="$PATH:$HOME/bin" ./.ci/linux-build.sh > + run: PATH="$PATH:$HOME/bin:$HOME/.local/bin" ./.ci/linux-build.sh > > - name: upload deb packages > if: matrix.deb_package != '' > diff --git a/.travis.yml b/.travis.yml > index acf3c10fb..51d051108 100644 > --- a/.travis.yml > +++ b/.travis.yml > @@ -24,6 +24,9 @@ addons: > - selinux-policy-dev > - libunbound-dev > - libunwind-dev > + - python3-setuptools > + - python3-wheel > + - ninja-build > > before_install: ./.ci/${TRAVIS_OS_NAME}-prepare.sh > > diff --git a/Documentation/faq/releases.rst b/Documentation/faq/releases.rst > index 3623e3f40..a52df2205 100644 > --- a/Documentation/faq/releases.rst > +++ b/Documentation/faq/releases.rst > @@ -214,7 +214,7 @@ Q: Are all the DPDK releases that OVS versions work > with maintained? > The latest information about DPDK stable and LTS releases can be found > at `DPDK stable`_. > > -.. _DPDK stable: http://dpdk.org/doc/guides/contributing/stable.html > +.. _DPDK stable: http://doc.dpdk.org/guides-20.11/contributing/stable.html > > Q: I get an error like this when I configure Open vSwitch: > > diff --git a/Documentation/intro/install/afxdp.rst > b/Documentation/intro/install/afxdp.rst > index 3c8f78825..aad0aeebe 100644 > --- a/Documentation/intro/install/afxdp.rst > +++ b/Documentation/intro/install/afxdp.rst > @@ -396,7 +396,7 @@ PVP using vhostuser device > -------------------------- > First, build OVS with DPDK and AFXDP:: > > - ./configure --enable-afxdp --with-dpdk=<dpdk path> > + ./configure --enable-afxdp --with-dpdk=shared|static > make -j4 && make install > > Create a vhost-user port from OVS:: > diff --git a/Documentation/intro/install/dpdk.rst > b/Documentation/intro/install/dpdk.rst > index fe11571d2..a595417ce 100644 > --- a/Documentation/intro/install/dpdk.rst > +++ b/Documentation/intro/install/dpdk.rst > @@ -42,7 +42,7 @@ Build requirements > In addition to the requirements described in :doc:`general`, building Open > vSwitch with DPDK will require the following: > > -- DPDK 19.11.2 > +- DPDK 20.11 > > - A `DPDK supported NIC`_ > > @@ -59,8 +59,10 @@ vSwitch with DPDK will require the following: > > Detailed system requirements can be found at `DPDK requirements`_. > > -.. _DPDK supported NIC: http://dpdk.org/doc/nics > -.. _DPDK requirements: http://dpdk.org/doc/guides/linux_gsg/sys_reqs.html > +.. _DPDK supported NIC: https://doc.dpdk.org/guides-20.11/nics/index.html > +.. _DPDK requirements: https://doc.dpdk.org/guides- > 20.11/linux_gsg/sys_reqs.html > + > +.. _dpdk-install: > > Installing > ---------- > @@ -71,38 +73,44 @@ Install DPDK > #. Download the `DPDK sources`_, extract the file and set ``DPDK_DIR``:: > > $ cd /usr/src/ > - $ wget https://fast.dpdk.org/rel/dpdk-19.11.2.tar.xz > - $ tar xf dpdk-19.11.2.tar.xz > - $ export DPDK_DIR=/usr/src/dpdk-stable-19.11.2 > + $ wget https://fast.dpdk.org/rel/dpdk-20.11.tar.xz > + $ tar xf dpdk-20.11.tar.xz > + $ export DPDK_DIR=/usr/src/dpdk-20.11 > $ cd $DPDK_DIR > > -#. (Optional) Configure DPDK as a shared library > +#. Configure and install DPDK using Meson > > - DPDK can be built as either a static library or a shared library. By > - default, it is configured for the former. If you wish to use the latter, set > - ``CONFIG_RTE_BUILD_SHARED_LIB=y`` in > ``$DPDK_DIR/config/common_base``. > + Build and install the DPDK library:: > > - .. note:: > + $ export DPDK_BUILD=$DPDK_DIR/build > + $ meson build > + $ ninja -C build > + $ sudo ninja -C build install > + $ sudo ldconfig > > - Minor performance loss is expected when using OVS with a shared DPDK > - library compared to a static DPDK library. > + Detailed information can be found at `DPDK documentation`_. > > -#. Configure and install DPDK > +#. (Optional) Configure and export the DPDK shared library location > > - Build and install the DPDK library:: > + Since DPDK is built both as static and shared library by default, no extra > + configuration is required for the build. > > - $ export DPDK_TARGET=x86_64-native-linuxapp-gcc > - $ export DPDK_BUILD=$DPDK_DIR/$DPDK_TARGET > - $ make install T=$DPDK_TARGET DESTDIR=install > + Exporting the path to library is not necessary if the DPDK libraries are > + system installed. For libraries installed using a prefix, export the path > + to this library and also update the $PKG_CONFIG_PATH for use > + before building OVS:: > > -#. (Optional) Export the DPDK shared library location > + $ export LD_LIBRARY_PATH=/path/to/installed/DPDK/libraries > + $ export PKG_CONFIG_PATH=/path/to/installed/".pc" file/for/DPDK > > - If DPDK was built as a shared library, export the path to this library for > - use when building OVS:: > + .. note:: > > - $ export LD_LIBRARY_PATH=$DPDK_DIR/x86_64-native-linuxapp-gcc/lib > + Minor performance loss is expected when using OVS with a shared DPDK > + library compared to a static DPDK library. > > .. _DPDK sources: http://dpdk.org/rel > +.. _DPDK documentation: > + https://doc.dpdk.org/guides-20.11/linux_gsg/build_dpdk.html > > Install OVS > ~~~~~~~~~~~ > @@ -121,16 +129,16 @@ has to be configured to build against the DPDK library > (``--with-dpdk``). > > #. Bootstrap, if required, as described in :ref:`general-bootstrapping` > > -#. Configure the package using the ``--with-dpdk`` flag:: > +#. Configure the package using the ``--with-dpdk`` flag: > + > + If OVS must consume DPDK static libraries > + (also equivalent to ``--with-dpdk=yes`` ):: > > - $ ./configure --with-dpdk=$DPDK_BUILD > + $ ./configure --with-dpdk=static > > - where ``DPDK_BUILD`` is the path to the built DPDK library. This can be > - skipped if DPDK library is installed in its default location. > + If OVS must consume DPDK shared libraries:: > > - If no path is provided to ``--with-dpdk``, but a pkg-config configuration > - for libdpdk is available the include paths will be generated via an > - equivalent ``pkg-config --cflags libdpdk``. > + $ ./configure --with-dpdk=shared > > .. note:: > While ``--with-dpdk`` is required, you can pass any other configuration > @@ -703,7 +711,7 @@ Limitations > release notes`_. > > .. _DPDK release notes: > - https://doc.dpdk.org/guides-19.11/rel_notes/release_19_11.html > + https://doc.dpdk.org/guides-20.11/rel_notes/release_20_11.html > > - Upper bound MTU: DPDK device drivers differ in how the L2 frame for a > given MTU value is calculated e.g. i40e driver includes 2 x vlan headers in > diff --git a/Documentation/topics/dpdk/phy.rst > b/Documentation/topics/dpdk/phy.rst > index 7ee3eacff..986dbd38e 100644 > --- a/Documentation/topics/dpdk/phy.rst > +++ b/Documentation/topics/dpdk/phy.rst > @@ -117,7 +117,7 @@ tool:: > > For more information, refer to the `DPDK documentation <dpdk-drivers>`__. > > -.. _dpdk-drivers: http://dpdk.org/doc/guides/linux_gsg/linux_drivers.html > +.. _dpdk-drivers: https://doc.dpdk.org/guides- > 20.11/linux_gsg/linux_drivers.html > > .. _dpdk-phy-multiqueue: > > @@ -218,18 +218,24 @@ If the log is not seen then the port can be detached > like so:: > Hotplugging with IGB_UIO > ~~~~~~~~~~~~~~~~~~~~~~~~ > > -As of DPDK 19.11, default igb_uio hotplugging behavior changes from > +.. important:: > + > + As of DPDK v20.11 IGB_UIO has been deprecated and is no longer built as > + part of the default DPDK library. Below is intended for those who wish > + to use IGB_UIO outside of the standard DPDK build from v20.11 onwards. > + > +As of DPDK v19.11, default igb_uio hotplugging behavior changed from > previous DPDK versions. > > -With DPDK 19.11, if no device is bound to igb_uio when OVS is launched then > -the IOVA mode may be set to virtual addressing for DPDK. This is incompatible > -for hotplugging with igb_uio. > +From DPDK v19.11 onwards, if no device is bound to igb_uio when OVS is > +launched then the IOVA mode may be set to virtual addressing for DPDK. > +This is incompatible for hotplugging with igb_uio. > > To hotplug a port with igb_uio in this case, DPDK must be configured to use > physical addressing for IOVA mode. For more information regarding IOVA > modes > in DPDK please refer to the `DPDK IOVA Mode Detection`__. > > -__ https://doc.dpdk.org/guides- > 19.11/prog_guide/env_abstraction_layer.html#iova-mode-detection > +__ https://doc.dpdk.org/guides- > 20.11/prog_guide/env_abstraction_layer.html#iova-mode-detection > > To configure OVS DPDK to use physical addressing for IOVA:: > > @@ -261,7 +267,7 @@ Representors are multi devices created on top of one > PF. > > For more information, refer to the `DPDK documentation`__. > > -__ https://doc.dpdk.org/guides-19.11/prog_guide/switch_representation.html > +__ https://doc.dpdk.org/guides-20.11/prog_guide/switch_representation.html > > Prior to port representors there was a one-to-one relationship between the PF > and the eth device. With port representors the relationship becomes one PF to > @@ -395,7 +401,7 @@ in the ``options`` column of the ``Interface`` table. > kernel netdevice, and be inherited from it when Open vSwitch is restarted, > even if the options described in this section are unset from Open vSwitch. > > -.. _bifurcated-drivers: > http://doc.dpdk.org/guides/linux_gsg/linux_drivers.html#bifurcated-driver > +.. _bifurcated-drivers: https://doc.dpdk.org/guides- > 20.11/linux_gsg/linux_drivers.html#bifurcated-driver > > - Configure the VF MAC address:: > > diff --git a/Documentation/topics/dpdk/vdev.rst > b/Documentation/topics/dpdk/vdev.rst > index 1c0df7f4b..7bd48165e 100644 > --- a/Documentation/topics/dpdk/vdev.rst > +++ b/Documentation/topics/dpdk/vdev.rst > @@ -63,4 +63,4 @@ run:: > More information on the different types of virtual DPDK PMDs can be found in > the `DPDK documentation`__. > > -__ http://dpdk.org/doc/guides/nics/overview.html > +__ https://doc.dpdk.org/guides-20.11/nics/overview.html > diff --git a/Documentation/topics/dpdk/vhost-user.rst > b/Documentation/topics/dpdk/vhost-user.rst > index 75d3fc958..bcd51e65c 100644 > --- a/Documentation/topics/dpdk/vhost-user.rst > +++ b/Documentation/topics/dpdk/vhost-user.rst > @@ -389,23 +389,7 @@ application in the VM. > > To begin, instantiate a guest as described in :ref:`dpdk-vhost-user` or > :ref:`dpdk-vhost-user-client`. Once started, connect to the VM, download the > -DPDK sources to VM and build DPDK:: > - > - $ cd /root/dpdk/ > - $ wget https://fast.dpdk.org/rel/dpdk-19.11.2.tar.xz > - $ tar xf dpdk-19.11.2.tar.xz > - $ export DPDK_DIR=/root/dpdk/dpdk-stable-19.11.2 > - $ export DPDK_TARGET=x86_64-native-linuxapp-gcc > - $ export DPDK_BUILD=$DPDK_DIR/$DPDK_TARGET > - $ cd $DPDK_DIR > - $ make install T=$DPDK_TARGET DESTDIR=install > - > -Build the test-pmd application:: > - > - $ cd app/test-pmd > - $ export RTE_SDK=$DPDK_DIR > - $ export RTE_TARGET=$DPDK_TARGET > - $ make > +DPDK sources to VM and build DPDK as described in :ref:`dpdk-install`. > > Setup huge pages and DPDK devices using UIO:: > > @@ -555,4 +539,4 @@ shown with:: > > Further information can be found in the > `DPDK documentation > -<https://doc.dpdk.org/guides-19.11/prog_guide/vhost_lib.html>`__ > +<https://doc.dpdk.org/guides-20.11/prog_guide/vhost_lib.html>`__ > diff --git a/Documentation/topics/testing.rst > b/Documentation/topics/testing.rst > index b9fa94dda..951fe9e85 100644 > --- a/Documentation/topics/testing.rst > +++ b/Documentation/topics/testing.rst > @@ -353,7 +353,7 @@ All tests are skipped if no hugepages are configured. > User must look into the DP > manual to figure out how to `Configure hugepages`_. > The phy test will skip if no compatible physical device is available. > > -.. _Configure hugepages: https://doc.dpdk.org/guides- > 19.11/linux_gsg/sys_reqs.html > +.. _Configure hugepages: https://doc.dpdk.org/guides- > 20.11/linux_gsg/sys_reqs.html > > All the features documented under `Unit Tests`_ are available for the DPDK > datapath testsuite. > diff --git a/Documentation/topics/userspace-tso.rst > b/Documentation/topics/userspace-tso.rst > index 14a7c6fb3..bd64e7ed3 100644 > --- a/Documentation/topics/userspace-tso.rst > +++ b/Documentation/topics/userspace-tso.rst > @@ -46,7 +46,7 @@ datasheet for compatibility. Secondly, the NIC must have > an associated DPDK > Poll Mode Driver (PMD) which supports `TSO`. For a list of features per PMD, > refer to the `DPDK documentation`__. > > -__ https://doc.dpdk.org/guides-19.11/nics/overview.html > +__ https://doc.dpdk.org/guides-20.11/nics/overview.html > > Enabling TSO > ~~~~~~~~~~~~ > diff --git a/NEWS b/NEWS > index 7e291a180..1a39cc661 100644 > --- a/NEWS > +++ b/NEWS > @@ -11,6 +11,7 @@ Post-v2.14.0 > Use the 'cluster/set-backlog-threshold' command to change limits. > - DPDK: > * Removed support for vhost-user dequeue zero-copy. > + * Add support for DPDK 20.11. > - Userspace datapath: > * Add the 'pmd' option to "ovs-appctl dpctl/dump-flows", which > restricts a flow dump to a single PMD thread if set. > diff --git a/acinclude.m4 b/acinclude.m4 > index ddf4b71e1..eb0496c25 100644 > --- a/acinclude.m4 > +++ b/acinclude.m4 > @@ -334,8 +334,9 @@ dnl > dnl Configure DPDK source tree > AC_DEFUN([OVS_CHECK_DPDK], [ > AC_ARG_WITH([dpdk], > - [AC_HELP_STRING([--with-dpdk=/path/to/dpdk], > - [Specify the DPDK build directory])], > + [AC_HELP_STRING([--with-dpdk=static|shared|yes], > + [Specify "static" or "shared" depending on the > + DPDK libraries to use])], > [have_dpdk=true]) > > AC_MSG_CHECKING([whether dpdk is enabled]) > @@ -345,35 +346,45 @@ AC_DEFUN([OVS_CHECK_DPDK], [ > else > AC_MSG_RESULT([yes]) > case "$with_dpdk" in > - yes) > - DPDK_AUTO_DISCOVER="true" > - PKG_CHECK_MODULES_STATIC([DPDK], [libdpdk], [ > - DPDK_INCLUDE="$DPDK_CFLAGS" > - DPDK_LIB="$DPDK_LIBS"], [ > - DPDK_INCLUDE="-I/usr/local/include/dpdk -I/usr/include/dpdk" > - DPDK_LIB="-ldpdk"]) > - ;; > - *) > - DPDK_AUTO_DISCOVER="false" > - DPDK_INCLUDE_PATH="$with_dpdk/include" > - # If 'with_dpdk' is passed install directory, point to headers > - # installed in $DESTDIR/$prefix/include/dpdk > - if test -e "$DPDK_INCLUDE_PATH/rte_config.h"; then > - DPDK_INCLUDE="-I$DPDK_INCLUDE_PATH" > - elif test -e "$DPDK_INCLUDE_PATH/dpdk/rte_config.h"; then > - DPDK_INCLUDE="-I$DPDK_INCLUDE_PATH/dpdk" > - fi > - DPDK_LIB_DIR="$with_dpdk/lib" > - DPDK_LIB="-ldpdk" > - ;; > + "shared") > + PKG_CHECK_MODULES([DPDK], [libdpdk], [ > + DPDK_INCLUDE="$DPDK_CFLAGS" > + DPDK_LIB="$DPDK_LIBS"], [ > + DPDK_INCLUDE="-I/usr/local/include/dpdk -I/usr/include/dpdk" > + DPDK_LIB="-ldpdk"]) > + ;; > + "static" | "yes") > + PKG_CHECK_MODULES_STATIC([DPDK], [libdpdk], [ > + DPDK_INCLUDE="$DPDK_CFLAGS" > + DPDK_LIB="$DPDK_LIBS"], [ > + DPDK_INCLUDE="-I/usr/local/include/dpdk -I/usr/include/dpdk" > + DPDK_LIB="-ldpdk"]) > + > + dnl Statically linked private DPDK objects of form > + dnl -l:file.a must be positioned between > + dnl --whole-archive ... --no-whole-archive linker parameters. > + dnl Old pkg-config versions misplace --no-whole-archive parameter > + dnl and put it next to --whole-archive. > + AC_MSG_CHECKING([for faulty pkg-config version]) > + echo "$DPDK_LIB" | grep -q 'whole-archive.*l:lib.*no-whole-archive' > + status=$? > + case $status in > + 0) > + AC_MSG_RESULT([no]) > + ;; > + 1) > + AC_MSG_RESULT([yes]) > + AC_MSG_ERROR([Please upgrade.pkg-config]) > + ;; > + *) > + AC_MSG_ERROR([grep exited with status $status]) > + ;; > + esac > esac > > ovs_save_CFLAGS="$CFLAGS" > ovs_save_LDFLAGS="$LDFLAGS" > CFLAGS="$CFLAGS $DPDK_INCLUDE" > - if test "$DPDK_AUTO_DISCOVER" = "false"; then > - LDFLAGS="$LDFLAGS -L${DPDK_LIB_DIR}" > - fi > > AC_CHECK_HEADERS([rte_config.h], [], [ > AC_MSG_ERROR([unable to find rte_config.h in $with_dpdk]) > @@ -422,20 +433,18 @@ AC_DEFUN([OVS_CHECK_DPDK], [ > [AC_MSG_RESULT([yes]) > DPDKLIB_FOUND=true], > [AC_MSG_RESULT([no]) > - if test "$DPDK_AUTO_DISCOVER" = "true"; then > - AC_MSG_ERROR(m4_normalize([ > - Could not find DPDK library in default search path, Use --with-dpdk > - to specify the DPDK library installed in non-standard location])) > - else > - AC_MSG_ERROR([Could not find DPDK libraries in $DPDK_LIB_DIR]) > - fi > + AC_MSG_ERROR(m4_normalize([ > + Could not find DPDK library in default search path, update > + PKG_CONFIG_PATH for pkg-config to find the .pc file in > + non-standard location])) > ]) > > CFLAGS="$ovs_save_CFLAGS" > LDFLAGS="$ovs_save_LDFLAGS" > - if test "$DPDK_AUTO_DISCOVER" = "false"; then > - OVS_LDFLAGS="$OVS_LDFLAGS -L$DPDK_LIB_DIR" > - fi > + # Stripping out possible instruction set specific configuration that DPDK > + # forces in pkg-config since this could override user-specified options. > + # It's enough to have -mssse3 to build with DPDK headers. > + DPDK_INCLUDE=$(echo "$DPDK_INCLUDE" | sed 's/-march=[[^ ]]*//g') > OVS_CFLAGS="$OVS_CFLAGS $DPDK_INCLUDE" > OVS_ENABLE_OPTION([-mssse3]) > > @@ -444,17 +453,16 @@ AC_DEFUN([OVS_CHECK_DPDK], [ > # This happens because the rest of the DPDK code doesn't use any symbol in > # the pmd driver objects, and the drivers register themselves using an > # __attribute__((constructor)) function. > - # > - # These options are specified inside a single -Wl directive to prevent > - # autotools from reordering them. > - # > - # OTOH newer versions of dpdk pkg-config (generated with Meson) > - # will already have flagged just the right set of libs with > - # --whole-archive - in those cases do not wrap it once more. > - case "$DPDK_LIB" in > - *whole-archive*) DPDK_vswitchd_LDFLAGS=$DPDK_LIB;; > - *) DPDK_vswitchd_LDFLAGS=-Wl,--whole-archive,$DPDK_LIB,--no-whole- > archive > - esac > + > + # Wrap the DPDK libraries inside a single -Wl directive > + # after comma separation to prevent autotools from reordering them. > + DPDK_vswitchd_LDFLAGS=$(echo "$DPDK_LIB"| tr -s ' ' ',' | sed 's/-Wl,//g') > + # Replace -pthread with -lpthread for LD and remove the last extra comma. > + DPDK_vswitchd_LDFLAGS=$(echo "$DPDK_vswitchd_LDFLAGS"| sed 's/,$//' | > \ > + sed 's/-pthread/-lpthread/g') > + # Prepend "-Wl,". > + DPDK_vswitchd_LDFLAGS="-Wl,$DPDK_vswitchd_LDFLAGS" > + > AC_SUBST([DPDK_vswitchd_LDFLAGS]) > AC_DEFINE([DPDK_NETDEV], [1], [System uses the DPDK module.]) > fi > diff --git a/include/sparse/automake.mk b/include/sparse/automake.mk > index 974ad3fe5..e96637119 100644 > --- a/include/sparse/automake.mk > +++ b/include/sparse/automake.mk > @@ -11,7 +11,9 @@ noinst_HEADERS += \ > include/sparse/netpacket/packet.h \ > include/sparse/pthread.h \ > include/sparse/rte_atomic.h \ > + include/sparse/rte_mbuf.h \ > include/sparse/rte_memcpy.h \ > + include/sparse/rte_trace_point.h \ > include/sparse/sys/socket.h \ > include/sparse/sys/sysmacros.h \ > include/sparse/sys/types.h \ > diff --git a/include/sparse/rte_mbuf.h b/include/sparse/rte_mbuf.h > new file mode 100644 > index 000000000..981cdb441 > --- /dev/null > +++ b/include/sparse/rte_mbuf.h > @@ -0,0 +1,29 @@ > +/* Copyright (c) 2020 Intel, Inc. > + * > + * Licensed under the Apache License, Version 2.0 (the "License"); > + * you may not use this file except in compliance with the License. > + * You may obtain a copy of the License at: > + * > + * http://www.apache.org/licenses/LICENSE-2.0 > + * > + * Unless required by applicable law or agreed to in writing, software > + * distributed under the License is distributed on an "AS IS" BASIS, > + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or > implied. > + * See the License for the specific language governing permissions and > + * limitations under the License. > + */ > + > +#ifndef __CHECKER__ > +#error "Use this header only with sparse. It is not a correct implementation." > +#endif > + > +/* sparse doesn't know about gcc atomic builtins. */ > +#ifndef __ATOMIC_ACQ_REL > +#define __ATOMIC_ACQ_REL 0 > +#define __ATOMIC_RELAXED 1 > +#define __atomic_add_fetch(p, val, memorder) (*(p) = *(p) + (val)) > +#define __atomic_store_n(p, val, memorder) (*(p) = (val)) > +#endif > + > +/* Get actual <rte_mbuf.h> definitions for us to annotate and build on. */ > +#include_next <rte_mbuf.h> > diff --git a/include/sparse/rte_trace_point.h b/include/sparse/rte_trace_point.h > new file mode 100644 > index 000000000..803923275 > --- /dev/null > +++ b/include/sparse/rte_trace_point.h > @@ -0,0 +1,28 @@ > +/* Copyright 2020, Red Hat, Inc. > + * > + * Licensed under the Apache License, Version 2.0 (the "License"); > + * you may not use this file except in compliance with the License. > + * You may obtain a copy of the License at: > + * > + * http://www.apache.org/licenses/LICENSE-2.0 > + * > + * Unless required by applicable law or agreed to in writing, software > + * distributed under the License is distributed on an "AS IS" BASIS, > + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or > implied. > + * See the License for the specific language governing permissions and > + * limitations under the License. > + */ > + > +#ifndef __CHECKER__ > +#error "Use this header only with sparse. It is not a correct implementation." > +#endif > + > +/* sparse doesn't know about gcc atomic builtins. */ > +#ifndef __ATOMIC_ACQUIRE > +#define __ATOMIC_ACQUIRE 0 > +#define __atomic_load_n(p, memorder) *(p) > +#endif > + > +/* Get actual <rte_trace_point.h> definitions for us to annotate and > + * build on. */ > +#include_next <rte_trace_point.h> > diff --git a/lib/dpdk.c b/lib/dpdk.c > index 2f235a742..319540394 100644 > --- a/lib/dpdk.c > +++ b/lib/dpdk.c > @@ -443,7 +443,7 @@ dpdk_init__(const struct smap *ovs_other_config) > > /** > * NOTE: This is an unsophisticated mechanism for determining the DPDK > - * lcore for the DPDK Master. > + * main core. > */ > if (auto_determine) { > const struct ovs_numa_info_core *core; > diff --git a/lib/netdev-dpdk.c b/lib/netdev-dpdk.c > index 75dffefb8..2640a421a 100644 > --- a/lib/netdev-dpdk.c > +++ b/lib/netdev-dpdk.c > @@ -26,12 +26,6 @@ > #include <sys/socket.h> > #include <linux/if.h> > > -/* Include rte_compat.h first to allow experimental API's needed for the > - * rte_meter.h rfc4115 functions. Once they are no longer marked as > - * experimental the #define and rte_compat.h include can be removed. > - */ > -#define ALLOW_EXPERIMENTAL_API > -#include <rte_compat.h> > #include <rte_bus_pci.h> > #include <rte_config.h> > #include <rte_cycles.h> > @@ -1312,7 +1306,7 @@ static int > vhost_common_construct(struct netdev *netdev) > OVS_REQUIRES(dpdk_mutex) > { > - int socket_id = rte_lcore_to_socket_id(rte_get_master_lcore()); > + int socket_id = rte_lcore_to_socket_id(rte_get_main_lcore()); > struct netdev_dpdk *dev = netdev_dpdk_cast(netdev); > > dev->vhost_rxq_enabled = > dpdk_rte_mzalloc(OVS_VHOST_MAX_QUEUE_NUM * > @@ -1463,7 +1457,6 @@ netdev_dpdk_destruct(struct netdev *netdev) > struct netdev_dpdk *dev = netdev_dpdk_cast(netdev); > struct rte_device *rte_dev; > struct rte_eth_dev *eth_dev; > - bool remove_on_close; > > ovs_mutex_lock(&dpdk_mutex); > > @@ -1475,20 +1468,15 @@ netdev_dpdk_destruct(struct netdev *netdev) > * FIXME: avoid direct access to DPDK internal array rte_eth_devices. > */ > eth_dev = &rte_eth_devices[dev->port_id]; > - remove_on_close = > - eth_dev->data && > - (eth_dev->data->dev_flags & RTE_ETH_DEV_CLOSE_REMOVE); > rte_dev = eth_dev->device; > > /* Remove the eth device. */ > rte_eth_dev_close(dev->port_id); > > - /* Remove this rte device and all its eth devices if flag > - * RTE_ETH_DEV_CLOSE_REMOVE is not supported (which means > representors > - * are not supported), or if all the eth devices belonging to the rte > - * device are closed. > + /* Remove this rte device and all its eth devices if all the eth > + * devices belonging to the rte device are closed. > */ > - if (!remove_on_close || !netdev_dpdk_get_num_ports(rte_dev)) { > + if (!netdev_dpdk_get_num_ports(rte_dev)) { > int ret = rte_dev_remove(rte_dev); > > if (ret < 0) { > -- > 2.17.1
On 12/16/20 2:00 PM, Stokes, Ian wrote: >> From: Ian Stokes <ian.stokes@intel.com> >> > > Thanks for working and sending this Sunil. > > @Ilya, does this resolve your concerns WRT the pkg-config check and ARM build in travis? It works fine. GHA passed and Travis for Arm works fine too. Some small coments inline. <sinp> >> diff --git a/acinclude.m4 b/acinclude.m4 >> index ddf4b71e1..eb0496c25 100644 >> --- a/acinclude.m4 >> +++ b/acinclude.m4 >> @@ -334,8 +334,9 @@ dnl >> dnl Configure DPDK source tree >> AC_DEFUN([OVS_CHECK_DPDK], [ >> AC_ARG_WITH([dpdk], >> - [AC_HELP_STRING([--with-dpdk=/path/to/dpdk], >> - [Specify the DPDK build directory])], >> + [AC_HELP_STRING([--with-dpdk=static|shared|yes], >> + [Specify "static" or "shared" depending on the >> + DPDK libraries to use])], >> [have_dpdk=true]) >> >> AC_MSG_CHECKING([whether dpdk is enabled]) >> @@ -345,35 +346,45 @@ AC_DEFUN([OVS_CHECK_DPDK], [ >> else >> AC_MSG_RESULT([yes]) >> case "$with_dpdk" in >> - yes) >> - DPDK_AUTO_DISCOVER="true" >> - PKG_CHECK_MODULES_STATIC([DPDK], [libdpdk], [ >> - DPDK_INCLUDE="$DPDK_CFLAGS" >> - DPDK_LIB="$DPDK_LIBS"], [ >> - DPDK_INCLUDE="-I/usr/local/include/dpdk -I/usr/include/dpdk" >> - DPDK_LIB="-ldpdk"]) >> - ;; >> - *) >> - DPDK_AUTO_DISCOVER="false" >> - DPDK_INCLUDE_PATH="$with_dpdk/include" >> - # If 'with_dpdk' is passed install directory, point to headers >> - # installed in $DESTDIR/$prefix/include/dpdk >> - if test -e "$DPDK_INCLUDE_PATH/rte_config.h"; then >> - DPDK_INCLUDE="-I$DPDK_INCLUDE_PATH" >> - elif test -e "$DPDK_INCLUDE_PATH/dpdk/rte_config.h"; then >> - DPDK_INCLUDE="-I$DPDK_INCLUDE_PATH/dpdk" >> - fi >> - DPDK_LIB_DIR="$with_dpdk/lib" >> - DPDK_LIB="-ldpdk" >> - ;; >> + "shared") >> + PKG_CHECK_MODULES([DPDK], [libdpdk], [ >> + DPDK_INCLUDE="$DPDK_CFLAGS" >> + DPDK_LIB="$DPDK_LIBS"], [ >> + DPDK_INCLUDE="-I/usr/local/include/dpdk -I/usr/include/dpdk" >> + DPDK_LIB="-ldpdk"]) >> + ;; >> + "static" | "yes") >> + PKG_CHECK_MODULES_STATIC([DPDK], [libdpdk], [ >> + DPDK_INCLUDE="$DPDK_CFLAGS" >> + DPDK_LIB="$DPDK_LIBS"], [ >> + DPDK_INCLUDE="-I/usr/local/include/dpdk -I/usr/include/dpdk" >> + DPDK_LIB="-ldpdk"]) >> + >> + dnl Statically linked private DPDK objects of form >> + dnl -l:file.a must be positioned between >> + dnl --whole-archive ... --no-whole-archive linker parameters. >> + dnl Old pkg-config versions misplace --no-whole-archive parameter >> + dnl and put it next to --whole-archive. >> + AC_MSG_CHECKING([for faulty pkg-config version]) >> + echo "$DPDK_LIB" | grep -q 'whole-archive.*l:lib.*no-whole-archive' >> + status=$? >> + case $status in >> + 0) >> + AC_MSG_RESULT([no]) >> + ;; >> + 1) >> + AC_MSG_RESULT([yes]) >> + AC_MSG_ERROR([Please upgrade.pkg-config]) Indentation of above lines is a bit off. And the text is a bit strange to me. Why is there a period in the middle of sentence? >> + ;; >> + *) >> + AC_MSG_ERROR([grep exited with status $status]) >> + ;; >> + esac >> esac >> >> ovs_save_CFLAGS="$CFLAGS" >> ovs_save_LDFLAGS="$LDFLAGS" >> CFLAGS="$CFLAGS $DPDK_INCLUDE" >> - if test "$DPDK_AUTO_DISCOVER" = "false"; then >> - LDFLAGS="$LDFLAGS -L${DPDK_LIB_DIR}" >> - fi >> >> AC_CHECK_HEADERS([rte_config.h], [], [ >> AC_MSG_ERROR([unable to find rte_config.h in $with_dpdk]) >> @@ -422,20 +433,18 @@ AC_DEFUN([OVS_CHECK_DPDK], [ >> [AC_MSG_RESULT([yes]) >> DPDKLIB_FOUND=true], >> [AC_MSG_RESULT([no]) >> - if test "$DPDK_AUTO_DISCOVER" = "true"; then >> - AC_MSG_ERROR(m4_normalize([ >> - Could not find DPDK library in default search path, Use --with-dpdk >> - to specify the DPDK library installed in non-standard location])) >> - else >> - AC_MSG_ERROR([Could not find DPDK libraries in $DPDK_LIB_DIR]) >> - fi >> + AC_MSG_ERROR(m4_normalize([ >> + Could not find DPDK library in default search path, update >> + PKG_CONFIG_PATH for pkg-config to find the .pc file in >> + non-standard location])) >> ]) >> >> CFLAGS="$ovs_save_CFLAGS" >> LDFLAGS="$ovs_save_LDFLAGS" >> - if test "$DPDK_AUTO_DISCOVER" = "false"; then >> - OVS_LDFLAGS="$OVS_LDFLAGS -L$DPDK_LIB_DIR" >> - fi >> + # Stripping out possible instruction set specific configuration that DPDK >> + # forces in pkg-config since this could override user-specified options. >> + # It's enough to have -mssse3 to build with DPDK headers. >> + DPDK_INCLUDE=$(echo "$DPDK_INCLUDE" | sed 's/-march=[[^ ]]*//g') >> OVS_CFLAGS="$OVS_CFLAGS $DPDK_INCLUDE" >> OVS_ENABLE_OPTION([-mssse3]) >> >> @@ -444,17 +453,16 @@ AC_DEFUN([OVS_CHECK_DPDK], [ >> # This happens because the rest of the DPDK code doesn't use any symbol in >> # the pmd driver objects, and the drivers register themselves using an >> # __attribute__((constructor)) function. >> - # >> - # These options are specified inside a single -Wl directive to prevent >> - # autotools from reordering them. >> - # >> - # OTOH newer versions of dpdk pkg-config (generated with Meson) >> - # will already have flagged just the right set of libs with >> - # --whole-archive - in those cases do not wrap it once more. >> - case "$DPDK_LIB" in >> - *whole-archive*) DPDK_vswitchd_LDFLAGS=$DPDK_LIB;; >> - *) DPDK_vswitchd_LDFLAGS=-Wl,--whole-archive,$DPDK_LIB,--no-whole- >> archive >> - esac >> + This empty line divides a comment into 2 separate comments. With that, first part of a comment looks like it's not related to the second one. I think, it should be a single comment block, otherwise, it's unclear why we're talking about 'whole-archive' stuff there at all. >> + # Wrap the DPDK libraries inside a single -Wl directive >> + # after comma separation to prevent autotools from reordering them. >> + DPDK_vswitchd_LDFLAGS=$(echo "$DPDK_LIB"| tr -s ' ' ',' | sed 's/-Wl,//g') >> + # Replace -pthread with -lpthread for LD and remove the last extra comma. >> + DPDK_vswitchd_LDFLAGS=$(echo "$DPDK_vswitchd_LDFLAGS"| sed 's/,$//' | >> \ >> + sed 's/-pthread/-lpthread/g') >> + # Prepend "-Wl,". >> + DPDK_vswitchd_LDFLAGS="-Wl,$DPDK_vswitchd_LDFLAGS" >> + >> AC_SUBST([DPDK_vswitchd_LDFLAGS]) >> AC_DEFINE([DPDK_NETDEV], [1], [System uses the DPDK module.]) >> fi
> On 12/16/20 2:00 PM, Stokes, Ian wrote: > >> From: Ian Stokes <ian.stokes@intel.com> > >> > > > > Thanks for working and sending this Sunil. > > > > @Ilya, does this resolve your concerns WRT the pkg-config check and ARM > build in travis? > > It works fine. GHA passed and Travis for Arm works fine too. > Some small coments inline. Thanks for checking. > > <sinp> > > >> diff --git a/acinclude.m4 b/acinclude.m4 > >> index ddf4b71e1..eb0496c25 100644 > >> --- a/acinclude.m4 > >> +++ b/acinclude.m4 > >> @@ -334,8 +334,9 @@ dnl > >> dnl Configure DPDK source tree > >> AC_DEFUN([OVS_CHECK_DPDK], [ > >> AC_ARG_WITH([dpdk], > >> - [AC_HELP_STRING([--with-dpdk=/path/to/dpdk], > >> - [Specify the DPDK build directory])], > >> + [AC_HELP_STRING([--with-dpdk=static|shared|yes], > >> + [Specify "static" or "shared" depending on the > >> + DPDK libraries to use])], > >> [have_dpdk=true]) > >> > >> AC_MSG_CHECKING([whether dpdk is enabled]) > >> @@ -345,35 +346,45 @@ AC_DEFUN([OVS_CHECK_DPDK], [ > >> else > >> AC_MSG_RESULT([yes]) > >> case "$with_dpdk" in > >> - yes) > >> - DPDK_AUTO_DISCOVER="true" > >> - PKG_CHECK_MODULES_STATIC([DPDK], [libdpdk], [ > >> - DPDK_INCLUDE="$DPDK_CFLAGS" > >> - DPDK_LIB="$DPDK_LIBS"], [ > >> - DPDK_INCLUDE="-I/usr/local/include/dpdk -I/usr/include/dpdk" > >> - DPDK_LIB="-ldpdk"]) > >> - ;; > >> - *) > >> - DPDK_AUTO_DISCOVER="false" > >> - DPDK_INCLUDE_PATH="$with_dpdk/include" > >> - # If 'with_dpdk' is passed install directory, point to headers > >> - # installed in $DESTDIR/$prefix/include/dpdk > >> - if test -e "$DPDK_INCLUDE_PATH/rte_config.h"; then > >> - DPDK_INCLUDE="-I$DPDK_INCLUDE_PATH" > >> - elif test -e "$DPDK_INCLUDE_PATH/dpdk/rte_config.h"; then > >> - DPDK_INCLUDE="-I$DPDK_INCLUDE_PATH/dpdk" > >> - fi > >> - DPDK_LIB_DIR="$with_dpdk/lib" > >> - DPDK_LIB="-ldpdk" > >> - ;; > >> + "shared") > >> + PKG_CHECK_MODULES([DPDK], [libdpdk], [ > >> + DPDK_INCLUDE="$DPDK_CFLAGS" > >> + DPDK_LIB="$DPDK_LIBS"], [ > >> + DPDK_INCLUDE="-I/usr/local/include/dpdk -I/usr/include/dpdk" > >> + DPDK_LIB="-ldpdk"]) > >> + ;; > >> + "static" | "yes") > >> + PKG_CHECK_MODULES_STATIC([DPDK], [libdpdk], [ > >> + DPDK_INCLUDE="$DPDK_CFLAGS" > >> + DPDK_LIB="$DPDK_LIBS"], [ > >> + DPDK_INCLUDE="-I/usr/local/include/dpdk -I/usr/include/dpdk" > >> + DPDK_LIB="-ldpdk"]) > >> + > >> + dnl Statically linked private DPDK objects of form > >> + dnl -l:file.a must be positioned between > >> + dnl --whole-archive ... --no-whole-archive linker parameters. > >> + dnl Old pkg-config versions misplace --no-whole-archive parameter > >> + dnl and put it next to --whole-archive. > >> + AC_MSG_CHECKING([for faulty pkg-config version]) > >> + echo "$DPDK_LIB" | grep -q 'whole-archive.*l:lib.*no-whole-archive' > >> + status=$? > >> + case $status in > >> + 0) > >> + AC_MSG_RESULT([no]) > >> + ;; > >> + 1) > >> + AC_MSG_RESULT([yes]) > >> + AC_MSG_ERROR([Please upgrade.pkg-config]) > > Indentation of above lines is a bit off. And the text is a bit strange to me. > Why is there a period in the middle of sentence? > Agreed, can remove this period and align correctly. > >> + ;; > >> + *) > >> + AC_MSG_ERROR([grep exited with status $status]) > >> + ;; > >> + esac > >> esac > >> > >> ovs_save_CFLAGS="$CFLAGS" > >> ovs_save_LDFLAGS="$LDFLAGS" > >> CFLAGS="$CFLAGS $DPDK_INCLUDE" > >> - if test "$DPDK_AUTO_DISCOVER" = "false"; then > >> - LDFLAGS="$LDFLAGS -L${DPDK_LIB_DIR}" > >> - fi > >> > >> AC_CHECK_HEADERS([rte_config.h], [], [ > >> AC_MSG_ERROR([unable to find rte_config.h in $with_dpdk]) > >> @@ -422,20 +433,18 @@ AC_DEFUN([OVS_CHECK_DPDK], [ > >> [AC_MSG_RESULT([yes]) > >> DPDKLIB_FOUND=true], > >> [AC_MSG_RESULT([no]) > >> - if test "$DPDK_AUTO_DISCOVER" = "true"; then > >> - AC_MSG_ERROR(m4_normalize([ > >> - Could not find DPDK library in default search path, Use --with-dpdk > >> - to specify the DPDK library installed in non-standard location])) > >> - else > >> - AC_MSG_ERROR([Could not find DPDK libraries in $DPDK_LIB_DIR]) > >> - fi > >> + AC_MSG_ERROR(m4_normalize([ > >> + Could not find DPDK library in default search path, update > >> + PKG_CONFIG_PATH for pkg-config to find the .pc file in > >> + non-standard location])) > >> ]) > >> > >> CFLAGS="$ovs_save_CFLAGS" > >> LDFLAGS="$ovs_save_LDFLAGS" > >> - if test "$DPDK_AUTO_DISCOVER" = "false"; then > >> - OVS_LDFLAGS="$OVS_LDFLAGS -L$DPDK_LIB_DIR" > >> - fi > >> + # Stripping out possible instruction set specific configuration that DPDK > >> + # forces in pkg-config since this could override user-specified options. > >> + # It's enough to have -mssse3 to build with DPDK headers. > >> + DPDK_INCLUDE=$(echo "$DPDK_INCLUDE" | sed 's/-march=[[^ ]]*//g') > >> OVS_CFLAGS="$OVS_CFLAGS $DPDK_INCLUDE" > >> OVS_ENABLE_OPTION([-mssse3]) > >> > >> @@ -444,17 +453,16 @@ AC_DEFUN([OVS_CHECK_DPDK], [ > >> # This happens because the rest of the DPDK code doesn't use any symbol > in > >> # the pmd driver objects, and the drivers register themselves using an > >> # __attribute__((constructor)) function. > >> - # > >> - # These options are specified inside a single -Wl directive to prevent > >> - # autotools from reordering them. > >> - # > >> - # OTOH newer versions of dpdk pkg-config (generated with Meson) > >> - # will already have flagged just the right set of libs with > >> - # --whole-archive - in those cases do not wrap it once more. > >> - case "$DPDK_LIB" in > >> - *whole-archive*) DPDK_vswitchd_LDFLAGS=$DPDK_LIB;; > >> - *) DPDK_vswitchd_LDFLAGS=-Wl,--whole-archive,$DPDK_LIB,--no- > whole- > >> archive > >> - esac > >> + > > This empty line divides a comment into 2 separate comments. With that, first > part of a comment looks like it's not related to the second one. > I think, it should be a single comment block, otherwise, it's unclear why we're > talking about 'whole-archive' stuff there at all. > OK, we can move this back to one comment. With these changes are you happy for me to commit with your ack? Regards Ian > >> + # Wrap the DPDK libraries inside a single -Wl directive > >> + # after comma separation to prevent autotools from reordering them. > >> + DPDK_vswitchd_LDFLAGS=$(echo "$DPDK_LIB"| tr -s ' ' ',' | sed 's/- > Wl,//g') > >> + # Replace -pthread with -lpthread for LD and remove the last extra > comma. > >> + DPDK_vswitchd_LDFLAGS=$(echo "$DPDK_vswitchd_LDFLAGS"| sed > 's/,$//' | > >> \ > >> + sed 's/-pthread/-lpthread/g') > >> + # Prepend "-Wl,". > >> + DPDK_vswitchd_LDFLAGS="-Wl,$DPDK_vswitchd_LDFLAGS" > >> + > >> AC_SUBST([DPDK_vswitchd_LDFLAGS]) > >> AC_DEFINE([DPDK_NETDEV], [1], [System uses the DPDK module.]) > >> fi
On 12/16/20 5:31 PM, Stokes, Ian wrote: >> On 12/16/20 2:00 PM, Stokes, Ian wrote: >>>> From: Ian Stokes <ian.stokes@intel.com> >>>> >>> >>> Thanks for working and sending this Sunil. >>> >>> @Ilya, does this resolve your concerns WRT the pkg-config check and ARM >> build in travis? >> >> It works fine. GHA passed and Travis for Arm works fine too. >> Some small coments inline. > > Thanks for checking. > >> >> <sinp> >> >>>> diff --git a/acinclude.m4 b/acinclude.m4 >>>> index ddf4b71e1..eb0496c25 100644 >>>> --- a/acinclude.m4 >>>> +++ b/acinclude.m4 >>>> @@ -334,8 +334,9 @@ dnl >>>> dnl Configure DPDK source tree >>>> AC_DEFUN([OVS_CHECK_DPDK], [ >>>> AC_ARG_WITH([dpdk], >>>> - [AC_HELP_STRING([--with-dpdk=/path/to/dpdk], >>>> - [Specify the DPDK build directory])], >>>> + [AC_HELP_STRING([--with-dpdk=static|shared|yes], >>>> + [Specify "static" or "shared" depending on the >>>> + DPDK libraries to use])], >>>> [have_dpdk=true]) >>>> >>>> AC_MSG_CHECKING([whether dpdk is enabled]) >>>> @@ -345,35 +346,45 @@ AC_DEFUN([OVS_CHECK_DPDK], [ >>>> else >>>> AC_MSG_RESULT([yes]) >>>> case "$with_dpdk" in >>>> - yes) >>>> - DPDK_AUTO_DISCOVER="true" >>>> - PKG_CHECK_MODULES_STATIC([DPDK], [libdpdk], [ >>>> - DPDK_INCLUDE="$DPDK_CFLAGS" >>>> - DPDK_LIB="$DPDK_LIBS"], [ >>>> - DPDK_INCLUDE="-I/usr/local/include/dpdk -I/usr/include/dpdk" >>>> - DPDK_LIB="-ldpdk"]) >>>> - ;; >>>> - *) >>>> - DPDK_AUTO_DISCOVER="false" >>>> - DPDK_INCLUDE_PATH="$with_dpdk/include" >>>> - # If 'with_dpdk' is passed install directory, point to headers >>>> - # installed in $DESTDIR/$prefix/include/dpdk >>>> - if test -e "$DPDK_INCLUDE_PATH/rte_config.h"; then >>>> - DPDK_INCLUDE="-I$DPDK_INCLUDE_PATH" >>>> - elif test -e "$DPDK_INCLUDE_PATH/dpdk/rte_config.h"; then >>>> - DPDK_INCLUDE="-I$DPDK_INCLUDE_PATH/dpdk" >>>> - fi >>>> - DPDK_LIB_DIR="$with_dpdk/lib" >>>> - DPDK_LIB="-ldpdk" >>>> - ;; >>>> + "shared") >>>> + PKG_CHECK_MODULES([DPDK], [libdpdk], [ >>>> + DPDK_INCLUDE="$DPDK_CFLAGS" >>>> + DPDK_LIB="$DPDK_LIBS"], [ >>>> + DPDK_INCLUDE="-I/usr/local/include/dpdk -I/usr/include/dpdk" >>>> + DPDK_LIB="-ldpdk"]) >>>> + ;; >>>> + "static" | "yes") >>>> + PKG_CHECK_MODULES_STATIC([DPDK], [libdpdk], [ >>>> + DPDK_INCLUDE="$DPDK_CFLAGS" >>>> + DPDK_LIB="$DPDK_LIBS"], [ >>>> + DPDK_INCLUDE="-I/usr/local/include/dpdk -I/usr/include/dpdk" >>>> + DPDK_LIB="-ldpdk"]) >>>> + >>>> + dnl Statically linked private DPDK objects of form >>>> + dnl -l:file.a must be positioned between >>>> + dnl --whole-archive ... --no-whole-archive linker parameters. >>>> + dnl Old pkg-config versions misplace --no-whole-archive parameter >>>> + dnl and put it next to --whole-archive. >>>> + AC_MSG_CHECKING([for faulty pkg-config version]) >>>> + echo "$DPDK_LIB" | grep -q 'whole-archive.*l:lib.*no-whole-archive' >>>> + status=$? >>>> + case $status in >>>> + 0) >>>> + AC_MSG_RESULT([no]) >>>> + ;; >>>> + 1) >>>> + AC_MSG_RESULT([yes]) >>>> + AC_MSG_ERROR([Please upgrade.pkg-config]) >> >> Indentation of above lines is a bit off. And the text is a bit strange to me. >> Why is there a period in the middle of sentence? >> > > Agreed, can remove this period and align correctly. > >>>> + ;; >>>> + *) >>>> + AC_MSG_ERROR([grep exited with status $status]) >>>> + ;; >>>> + esac >>>> esac >>>> >>>> ovs_save_CFLAGS="$CFLAGS" >>>> ovs_save_LDFLAGS="$LDFLAGS" >>>> CFLAGS="$CFLAGS $DPDK_INCLUDE" >>>> - if test "$DPDK_AUTO_DISCOVER" = "false"; then >>>> - LDFLAGS="$LDFLAGS -L${DPDK_LIB_DIR}" >>>> - fi >>>> >>>> AC_CHECK_HEADERS([rte_config.h], [], [ >>>> AC_MSG_ERROR([unable to find rte_config.h in $with_dpdk]) >>>> @@ -422,20 +433,18 @@ AC_DEFUN([OVS_CHECK_DPDK], [ >>>> [AC_MSG_RESULT([yes]) >>>> DPDKLIB_FOUND=true], >>>> [AC_MSG_RESULT([no]) >>>> - if test "$DPDK_AUTO_DISCOVER" = "true"; then >>>> - AC_MSG_ERROR(m4_normalize([ >>>> - Could not find DPDK library in default search path, Use --with-dpdk >>>> - to specify the DPDK library installed in non-standard location])) >>>> - else >>>> - AC_MSG_ERROR([Could not find DPDK libraries in $DPDK_LIB_DIR]) >>>> - fi >>>> + AC_MSG_ERROR(m4_normalize([ >>>> + Could not find DPDK library in default search path, update >>>> + PKG_CONFIG_PATH for pkg-config to find the .pc file in >>>> + non-standard location])) >>>> ]) >>>> >>>> CFLAGS="$ovs_save_CFLAGS" >>>> LDFLAGS="$ovs_save_LDFLAGS" >>>> - if test "$DPDK_AUTO_DISCOVER" = "false"; then >>>> - OVS_LDFLAGS="$OVS_LDFLAGS -L$DPDK_LIB_DIR" >>>> - fi >>>> + # Stripping out possible instruction set specific configuration that DPDK >>>> + # forces in pkg-config since this could override user-specified options. >>>> + # It's enough to have -mssse3 to build with DPDK headers. >>>> + DPDK_INCLUDE=$(echo "$DPDK_INCLUDE" | sed 's/-march=[[^ ]]*//g') >>>> OVS_CFLAGS="$OVS_CFLAGS $DPDK_INCLUDE" >>>> OVS_ENABLE_OPTION([-mssse3]) >>>> >>>> @@ -444,17 +453,16 @@ AC_DEFUN([OVS_CHECK_DPDK], [ >>>> # This happens because the rest of the DPDK code doesn't use any symbol >> in >>>> # the pmd driver objects, and the drivers register themselves using an >>>> # __attribute__((constructor)) function. >>>> - # >>>> - # These options are specified inside a single -Wl directive to prevent >>>> - # autotools from reordering them. >>>> - # >>>> - # OTOH newer versions of dpdk pkg-config (generated with Meson) >>>> - # will already have flagged just the right set of libs with >>>> - # --whole-archive - in those cases do not wrap it once more. >>>> - case "$DPDK_LIB" in >>>> - *whole-archive*) DPDK_vswitchd_LDFLAGS=$DPDK_LIB;; >>>> - *) DPDK_vswitchd_LDFLAGS=-Wl,--whole-archive,$DPDK_LIB,--no- >> whole- >>>> archive >>>> - esac >>>> + >> >> This empty line divides a comment into 2 separate comments. With that, first >> part of a comment looks like it's not related to the second one. >> I think, it should be a single comment block, otherwise, it's unclear why we're >> talking about 'whole-archive' stuff there at all. >> > > OK, we can move this back to one comment. > > With these changes are you happy for me to commit with your ack? Yes, I'm OK with that. > > Regards > Ian >>>> + # Wrap the DPDK libraries inside a single -Wl directive >>>> + # after comma separation to prevent autotools from reordering them. >>>> + DPDK_vswitchd_LDFLAGS=$(echo "$DPDK_LIB"| tr -s ' ' ',' | sed 's/- >> Wl,//g') >>>> + # Replace -pthread with -lpthread for LD and remove the last extra >> comma. >>>> + DPDK_vswitchd_LDFLAGS=$(echo "$DPDK_vswitchd_LDFLAGS"| sed >> 's/,$//' | >>>> \ >>>> + sed 's/-pthread/-lpthread/g') >>>> + # Prepend "-Wl,". >>>> + DPDK_vswitchd_LDFLAGS="-Wl,$DPDK_vswitchd_LDFLAGS" >>>> + >>>> AC_SUBST([DPDK_vswitchd_LDFLAGS]) >>>> AC_DEFINE([DPDK_NETDEV], [1], [System uses the DPDK module.]) >>>> fi
> On 12/16/20 5:31 PM, Stokes, Ian wrote: > >> On 12/16/20 2:00 PM, Stokes, Ian wrote: > >>>> From: Ian Stokes <ian.stokes@intel.com> > >>>> > >>> > >>> Thanks for working and sending this Sunil. > >>> > >>> @Ilya, does this resolve your concerns WRT the pkg-config check and ARM > >> build in travis? > >> > >> It works fine. GHA passed and Travis for Arm works fine too. > >> Some small coments inline. > > > > Thanks for checking. > > > >> > >> <sinp> > >> > >>>> diff --git a/acinclude.m4 b/acinclude.m4 > >>>> index ddf4b71e1..eb0496c25 100644 > >>>> --- a/acinclude.m4 > >>>> +++ b/acinclude.m4 > >>>> @@ -334,8 +334,9 @@ dnl > >>>> dnl Configure DPDK source tree > >>>> AC_DEFUN([OVS_CHECK_DPDK], [ > >>>> AC_ARG_WITH([dpdk], > >>>> - [AC_HELP_STRING([--with-dpdk=/path/to/dpdk], > >>>> - [Specify the DPDK build directory])], > >>>> + [AC_HELP_STRING([--with-dpdk=static|shared|yes], > >>>> + [Specify "static" or "shared" depending on the > >>>> + DPDK libraries to use])], > >>>> [have_dpdk=true]) > >>>> > >>>> AC_MSG_CHECKING([whether dpdk is enabled]) > >>>> @@ -345,35 +346,45 @@ AC_DEFUN([OVS_CHECK_DPDK], [ > >>>> else > >>>> AC_MSG_RESULT([yes]) > >>>> case "$with_dpdk" in > >>>> - yes) > >>>> - DPDK_AUTO_DISCOVER="true" > >>>> - PKG_CHECK_MODULES_STATIC([DPDK], [libdpdk], [ > >>>> - DPDK_INCLUDE="$DPDK_CFLAGS" > >>>> - DPDK_LIB="$DPDK_LIBS"], [ > >>>> - DPDK_INCLUDE="-I/usr/local/include/dpdk -I/usr/include/dpdk" > >>>> - DPDK_LIB="-ldpdk"]) > >>>> - ;; > >>>> - *) > >>>> - DPDK_AUTO_DISCOVER="false" > >>>> - DPDK_INCLUDE_PATH="$with_dpdk/include" > >>>> - # If 'with_dpdk' is passed install directory, point to headers > >>>> - # installed in $DESTDIR/$prefix/include/dpdk > >>>> - if test -e "$DPDK_INCLUDE_PATH/rte_config.h"; then > >>>> - DPDK_INCLUDE="-I$DPDK_INCLUDE_PATH" > >>>> - elif test -e "$DPDK_INCLUDE_PATH/dpdk/rte_config.h"; then > >>>> - DPDK_INCLUDE="-I$DPDK_INCLUDE_PATH/dpdk" > >>>> - fi > >>>> - DPDK_LIB_DIR="$with_dpdk/lib" > >>>> - DPDK_LIB="-ldpdk" > >>>> - ;; > >>>> + "shared") > >>>> + PKG_CHECK_MODULES([DPDK], [libdpdk], [ > >>>> + DPDK_INCLUDE="$DPDK_CFLAGS" > >>>> + DPDK_LIB="$DPDK_LIBS"], [ > >>>> + DPDK_INCLUDE="-I/usr/local/include/dpdk -I/usr/include/dpdk" > >>>> + DPDK_LIB="-ldpdk"]) > >>>> + ;; > >>>> + "static" | "yes") > >>>> + PKG_CHECK_MODULES_STATIC([DPDK], [libdpdk], [ > >>>> + DPDK_INCLUDE="$DPDK_CFLAGS" > >>>> + DPDK_LIB="$DPDK_LIBS"], [ > >>>> + DPDK_INCLUDE="-I/usr/local/include/dpdk -I/usr/include/dpdk" > >>>> + DPDK_LIB="-ldpdk"]) > >>>> + > >>>> + dnl Statically linked private DPDK objects of form > >>>> + dnl -l:file.a must be positioned between > >>>> + dnl --whole-archive ... --no-whole-archive linker parameters. > >>>> + dnl Old pkg-config versions misplace --no-whole-archive parameter > >>>> + dnl and put it next to --whole-archive. > >>>> + AC_MSG_CHECKING([for faulty pkg-config version]) > >>>> + echo "$DPDK_LIB" | grep -q 'whole-archive.*l:lib.*no-whole- > archive' > >>>> + status=$? > >>>> + case $status in > >>>> + 0) > >>>> + AC_MSG_RESULT([no]) > >>>> + ;; > >>>> + 1) > >>>> + AC_MSG_RESULT([yes]) > >>>> + AC_MSG_ERROR([Please upgrade.pkg-config]) > >> > >> Indentation of above lines is a bit off. And the text is a bit strange to me. > >> Why is there a period in the middle of sentence? > >> > > > > Agreed, can remove this period and align correctly. > > > >>>> + ;; > >>>> + *) > >>>> + AC_MSG_ERROR([grep exited with status $status]) > >>>> + ;; > >>>> + esac > >>>> esac > >>>> > >>>> ovs_save_CFLAGS="$CFLAGS" > >>>> ovs_save_LDFLAGS="$LDFLAGS" > >>>> CFLAGS="$CFLAGS $DPDK_INCLUDE" > >>>> - if test "$DPDK_AUTO_DISCOVER" = "false"; then > >>>> - LDFLAGS="$LDFLAGS -L${DPDK_LIB_DIR}" > >>>> - fi > >>>> > >>>> AC_CHECK_HEADERS([rte_config.h], [], [ > >>>> AC_MSG_ERROR([unable to find rte_config.h in $with_dpdk]) > >>>> @@ -422,20 +433,18 @@ AC_DEFUN([OVS_CHECK_DPDK], [ > >>>> [AC_MSG_RESULT([yes]) > >>>> DPDKLIB_FOUND=true], > >>>> [AC_MSG_RESULT([no]) > >>>> - if test "$DPDK_AUTO_DISCOVER" = "true"; then > >>>> - AC_MSG_ERROR(m4_normalize([ > >>>> - Could not find DPDK library in default search path, Use --with-dpdk > >>>> - to specify the DPDK library installed in non-standard location])) > >>>> - else > >>>> - AC_MSG_ERROR([Could not find DPDK libraries in $DPDK_LIB_DIR]) > >>>> - fi > >>>> + AC_MSG_ERROR(m4_normalize([ > >>>> + Could not find DPDK library in default search path, update > >>>> + PKG_CONFIG_PATH for pkg-config to find the .pc file in > >>>> + non-standard location])) > >>>> ]) > >>>> > >>>> CFLAGS="$ovs_save_CFLAGS" > >>>> LDFLAGS="$ovs_save_LDFLAGS" > >>>> - if test "$DPDK_AUTO_DISCOVER" = "false"; then > >>>> - OVS_LDFLAGS="$OVS_LDFLAGS -L$DPDK_LIB_DIR" > >>>> - fi > >>>> + # Stripping out possible instruction set specific configuration that DPDK > >>>> + # forces in pkg-config since this could override user-specified options. > >>>> + # It's enough to have -mssse3 to build with DPDK headers. > >>>> + DPDK_INCLUDE=$(echo "$DPDK_INCLUDE" | sed 's/-march=[[^ ]]*//g') > >>>> OVS_CFLAGS="$OVS_CFLAGS $DPDK_INCLUDE" > >>>> OVS_ENABLE_OPTION([-mssse3]) > >>>> > >>>> @@ -444,17 +453,16 @@ AC_DEFUN([OVS_CHECK_DPDK], [ > >>>> # This happens because the rest of the DPDK code doesn't use any > symbol > >> in > >>>> # the pmd driver objects, and the drivers register themselves using an > >>>> # __attribute__((constructor)) function. > >>>> - # > >>>> - # These options are specified inside a single -Wl directive to prevent > >>>> - # autotools from reordering them. > >>>> - # > >>>> - # OTOH newer versions of dpdk pkg-config (generated with Meson) > >>>> - # will already have flagged just the right set of libs with > >>>> - # --whole-archive - in those cases do not wrap it once more. > >>>> - case "$DPDK_LIB" in > >>>> - *whole-archive*) DPDK_vswitchd_LDFLAGS=$DPDK_LIB;; > >>>> - *) DPDK_vswitchd_LDFLAGS=-Wl,--whole-archive,$DPDK_LIB,--no- > >> whole- > >>>> archive > >>>> - esac > >>>> + > >> > >> This empty line divides a comment into 2 separate comments. With that, first > >> part of a comment looks like it's not related to the second one. > >> I think, it should be a single comment block, otherwise, it's unclear why we're > >> talking about 'whole-archive' stuff there at all. > >> > > > > OK, we can move this back to one comment. > > > > With these changes are you happy for me to commit with your ack? > > Yes, I'm OK with that. > Thanks Ilya, I've just sent a v5 with the changes. I can add it to that instead if you're ok with that. http://patchwork.ozlabs.org/project/openvswitch/list/?series=220908 Regards Ian > > > > Regards > > Ian > >>>> + # Wrap the DPDK libraries inside a single -Wl directive > >>>> + # after comma separation to prevent autotools from reordering them. > >>>> + DPDK_vswitchd_LDFLAGS=$(echo "$DPDK_LIB"| tr -s ' ' ',' | sed 's/- > >> Wl,//g') > >>>> + # Replace -pthread with -lpthread for LD and remove the last extra > >> comma. > >>>> + DPDK_vswitchd_LDFLAGS=$(echo "$DPDK_vswitchd_LDFLAGS"| sed > >> 's/,$//' | > >>>> \ > >>>> + sed 's/-pthread/-lpthread/g') > >>>> + # Prepend "-Wl,". > >>>> + DPDK_vswitchd_LDFLAGS="-Wl,$DPDK_vswitchd_LDFLAGS" > >>>> + > >>>> AC_SUBST([DPDK_vswitchd_LDFLAGS]) > >>>> AC_DEFINE([DPDK_NETDEV], [1], [System uses the DPDK module.]) > >>>> fi
diff --git a/.ci/linux-build.sh b/.ci/linux-build.sh index 16102ac94..3e5136fd4 100755 --- a/.ci/linux-build.sh +++ b/.ci/linux-build.sh @@ -87,17 +87,29 @@ function install_dpdk() { local DPDK_VER=$1 local VERSION_FILE="dpdk-dir/travis-dpdk-cache-version" + local DPDK_OPTS="" + local DPDK_LIB="" if [ -z "$TRAVIS_ARCH" ] || [ "$TRAVIS_ARCH" == "amd64" ]; then - TARGET="x86_64-native-linuxapp-gcc" + DPDK_LIB=$(pwd)/dpdk-dir/build/lib/x86_64-linux-gnu elif [ "$TRAVIS_ARCH" == "aarch64" ]; then - TARGET="arm64-armv8a-linuxapp-gcc" + DPDK_LIB=$(pwd)/dpdk-dir/build/lib/aarch64-linux-gnu else echo "Target is unknown" exit 1 fi + if [ "$DPDK_SHARED" ]; then + EXTRA_OPTS="$EXTRA_OPTS --with-dpdk=shared" + export LD_LIBRARY_PATH=$DPDK_LIB/:$LD_LIBRARY_PATH + else + EXTRA_OPTS="$EXTRA_OPTS --with-dpdk=static" + fi + + # Export the following path for pkg-config to find the .pc file. + export PKG_CONFIG_PATH=$DPDK_LIB/pkgconfig/:$PKG_CONFIG_PATH + if [ "${DPDK_VER##refs/*/}" != "${DPDK_VER}" ]; then # Avoid using cache for git tree build. rm -rf dpdk-dir @@ -110,7 +122,8 @@ function install_dpdk() if [ -f "${VERSION_FILE}" ]; then VER=$(cat ${VERSION_FILE}) if [ "${VER}" = "${DPDK_VER}" ]; then - EXTRA_OPTS="${EXTRA_OPTS} --with-dpdk=$(pwd)/dpdk-dir/build" + # Update the library paths. + sudo ldconfig echo "Found cached DPDK ${VER} build in $(pwd)/dpdk-dir" return fi @@ -124,23 +137,24 @@ function install_dpdk() pushd dpdk-dir fi - make config CC=gcc T=$TARGET + # Switching to 'default' machine to make dpdk-dir cache usable on + # different CPUs. We can't be sure that all CI machines are exactly same. + DPDK_OPTS="$DPDK_OPTS -Dmachine=default" - if [ "$DPDK_SHARED" ]; then - sed -i '/CONFIG_RTE_BUILD_SHARED_LIB=n/s/=n/=y/' build/.config - export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$(pwd)/$TARGET/lib - fi + # Disable building DPDK unit tests. Not needed for OVS build or tests. + DPDK_OPTS="$DPDK_OPTS -Dtests=false" + + # Install DPDK using prefix. + DPDK_OPTS="$DPDK_OPTS --prefix=$(pwd)/build" + + CC=gcc meson $DPDK_OPTS build + ninja -C build + ninja -C build install - # Disable building DPDK kernel modules. Not needed for OVS build or tests. - sed -i '/CONFIG_RTE_EAL_IGB_UIO=y/s/=y/=n/' build/.config - sed -i '/CONFIG_RTE_KNI_KMOD=y/s/=y/=n/' build/.config + # Update the library paths. + sudo ldconfig - # Switching to 'default' machine to make dpdk-dir cache usable on different - # CPUs. We can't be sure that all CI machines are exactly same. - sed -i '/CONFIG_RTE_MACHINE="native"/s/="native"/="default"/' build/.config - make -j4 CC=gcc EXTRA_CFLAGS='-fPIC' - EXTRA_OPTS="$EXTRA_OPTS --with-dpdk=$(pwd)/build" echo "Installed DPDK source in $(pwd)" popd echo "${DPDK_VER}" > ${VERSION_FILE} @@ -187,7 +201,7 @@ fi if [ "$DPDK" ] || [ "$DPDK_SHARED" ]; then if [ -z "$DPDK_VER" ]; then - DPDK_VER="19.11.2" + DPDK_VER="20.11" fi install_dpdk $DPDK_VER if [ "$CC" = "clang" ]; then diff --git a/.ci/linux-prepare.sh b/.ci/linux-prepare.sh index fea905a83..69a40011f 100755 --- a/.ci/linux-prepare.sh +++ b/.ci/linux-prepare.sh @@ -22,6 +22,7 @@ cd .. pip3 install --disable-pip-version-check --user flake8 hacking pip3 install --user --upgrade docutils +pip3 install --user 'meson==0.47.1' if [ "$M32" ]; then # Installing 32-bit libraries. diff --git a/.github/workflows/build-and-test.yml b/.github/workflows/build-and-test.yml index 847fd3150..c83066138 100644 --- a/.github/workflows/build-and-test.yml +++ b/.github/workflows/build-and-test.yml @@ -8,7 +8,8 @@ jobs: dependencies: | automake libtool gcc bc libjemalloc1 libjemalloc-dev \ libssl-dev llvm-dev libelf-dev libnuma-dev libpcap-dev \ - python3-openssl python3-pip python3-sphinx \ + ninja-build python3-openssl python3-pip \ + python3-setuptools python3-sphinx python3-wheel \ selinux-policy-dev deb_dependencies: | linux-headers-$(uname -r) build-essential fakeroot devscripts equivs @@ -146,7 +147,7 @@ jobs: run: ./.ci/linux-prepare.sh - name: build - run: PATH="$PATH:$HOME/bin" ./.ci/linux-build.sh + run: PATH="$PATH:$HOME/bin:$HOME/.local/bin" ./.ci/linux-build.sh - name: upload deb packages if: matrix.deb_package != '' diff --git a/.travis.yml b/.travis.yml index acf3c10fb..51d051108 100644 --- a/.travis.yml +++ b/.travis.yml @@ -24,6 +24,9 @@ addons: - selinux-policy-dev - libunbound-dev - libunwind-dev + - python3-setuptools + - python3-wheel + - ninja-build before_install: ./.ci/${TRAVIS_OS_NAME}-prepare.sh diff --git a/Documentation/faq/releases.rst b/Documentation/faq/releases.rst index 3623e3f40..a52df2205 100644 --- a/Documentation/faq/releases.rst +++ b/Documentation/faq/releases.rst @@ -214,7 +214,7 @@ Q: Are all the DPDK releases that OVS versions work with maintained? The latest information about DPDK stable and LTS releases can be found at `DPDK stable`_. -.. _DPDK stable: http://dpdk.org/doc/guides/contributing/stable.html +.. _DPDK stable: http://doc.dpdk.org/guides-20.11/contributing/stable.html Q: I get an error like this when I configure Open vSwitch: diff --git a/Documentation/intro/install/afxdp.rst b/Documentation/intro/install/afxdp.rst index 3c8f78825..aad0aeebe 100644 --- a/Documentation/intro/install/afxdp.rst +++ b/Documentation/intro/install/afxdp.rst @@ -396,7 +396,7 @@ PVP using vhostuser device -------------------------- First, build OVS with DPDK and AFXDP:: - ./configure --enable-afxdp --with-dpdk=<dpdk path> + ./configure --enable-afxdp --with-dpdk=shared|static make -j4 && make install Create a vhost-user port from OVS:: diff --git a/Documentation/intro/install/dpdk.rst b/Documentation/intro/install/dpdk.rst index fe11571d2..a595417ce 100644 --- a/Documentation/intro/install/dpdk.rst +++ b/Documentation/intro/install/dpdk.rst @@ -42,7 +42,7 @@ Build requirements In addition to the requirements described in :doc:`general`, building Open vSwitch with DPDK will require the following: -- DPDK 19.11.2 +- DPDK 20.11 - A `DPDK supported NIC`_ @@ -59,8 +59,10 @@ vSwitch with DPDK will require the following: Detailed system requirements can be found at `DPDK requirements`_. -.. _DPDK supported NIC: http://dpdk.org/doc/nics -.. _DPDK requirements: http://dpdk.org/doc/guides/linux_gsg/sys_reqs.html +.. _DPDK supported NIC: https://doc.dpdk.org/guides-20.11/nics/index.html +.. _DPDK requirements: https://doc.dpdk.org/guides-20.11/linux_gsg/sys_reqs.html + +.. _dpdk-install: Installing ---------- @@ -71,38 +73,44 @@ Install DPDK #. Download the `DPDK sources`_, extract the file and set ``DPDK_DIR``:: $ cd /usr/src/ - $ wget https://fast.dpdk.org/rel/dpdk-19.11.2.tar.xz - $ tar xf dpdk-19.11.2.tar.xz - $ export DPDK_DIR=/usr/src/dpdk-stable-19.11.2 + $ wget https://fast.dpdk.org/rel/dpdk-20.11.tar.xz + $ tar xf dpdk-20.11.tar.xz + $ export DPDK_DIR=/usr/src/dpdk-20.11 $ cd $DPDK_DIR -#. (Optional) Configure DPDK as a shared library +#. Configure and install DPDK using Meson - DPDK can be built as either a static library or a shared library. By - default, it is configured for the former. If you wish to use the latter, set - ``CONFIG_RTE_BUILD_SHARED_LIB=y`` in ``$DPDK_DIR/config/common_base``. + Build and install the DPDK library:: - .. note:: + $ export DPDK_BUILD=$DPDK_DIR/build + $ meson build + $ ninja -C build + $ sudo ninja -C build install + $ sudo ldconfig - Minor performance loss is expected when using OVS with a shared DPDK - library compared to a static DPDK library. + Detailed information can be found at `DPDK documentation`_. -#. Configure and install DPDK +#. (Optional) Configure and export the DPDK shared library location - Build and install the DPDK library:: + Since DPDK is built both as static and shared library by default, no extra + configuration is required for the build. - $ export DPDK_TARGET=x86_64-native-linuxapp-gcc - $ export DPDK_BUILD=$DPDK_DIR/$DPDK_TARGET - $ make install T=$DPDK_TARGET DESTDIR=install + Exporting the path to library is not necessary if the DPDK libraries are + system installed. For libraries installed using a prefix, export the path + to this library and also update the $PKG_CONFIG_PATH for use + before building OVS:: -#. (Optional) Export the DPDK shared library location + $ export LD_LIBRARY_PATH=/path/to/installed/DPDK/libraries + $ export PKG_CONFIG_PATH=/path/to/installed/".pc" file/for/DPDK - If DPDK was built as a shared library, export the path to this library for - use when building OVS:: + .. note:: - $ export LD_LIBRARY_PATH=$DPDK_DIR/x86_64-native-linuxapp-gcc/lib + Minor performance loss is expected when using OVS with a shared DPDK + library compared to a static DPDK library. .. _DPDK sources: http://dpdk.org/rel +.. _DPDK documentation: + https://doc.dpdk.org/guides-20.11/linux_gsg/build_dpdk.html Install OVS ~~~~~~~~~~~ @@ -121,16 +129,16 @@ has to be configured to build against the DPDK library (``--with-dpdk``). #. Bootstrap, if required, as described in :ref:`general-bootstrapping` -#. Configure the package using the ``--with-dpdk`` flag:: +#. Configure the package using the ``--with-dpdk`` flag: + + If OVS must consume DPDK static libraries + (also equivalent to ``--with-dpdk=yes`` ):: - $ ./configure --with-dpdk=$DPDK_BUILD + $ ./configure --with-dpdk=static - where ``DPDK_BUILD`` is the path to the built DPDK library. This can be - skipped if DPDK library is installed in its default location. + If OVS must consume DPDK shared libraries:: - If no path is provided to ``--with-dpdk``, but a pkg-config configuration - for libdpdk is available the include paths will be generated via an - equivalent ``pkg-config --cflags libdpdk``. + $ ./configure --with-dpdk=shared .. note:: While ``--with-dpdk`` is required, you can pass any other configuration @@ -703,7 +711,7 @@ Limitations release notes`_. .. _DPDK release notes: - https://doc.dpdk.org/guides-19.11/rel_notes/release_19_11.html + https://doc.dpdk.org/guides-20.11/rel_notes/release_20_11.html - Upper bound MTU: DPDK device drivers differ in how the L2 frame for a given MTU value is calculated e.g. i40e driver includes 2 x vlan headers in diff --git a/Documentation/topics/dpdk/phy.rst b/Documentation/topics/dpdk/phy.rst index 7ee3eacff..986dbd38e 100644 --- a/Documentation/topics/dpdk/phy.rst +++ b/Documentation/topics/dpdk/phy.rst @@ -117,7 +117,7 @@ tool:: For more information, refer to the `DPDK documentation <dpdk-drivers>`__. -.. _dpdk-drivers: http://dpdk.org/doc/guides/linux_gsg/linux_drivers.html +.. _dpdk-drivers: https://doc.dpdk.org/guides-20.11/linux_gsg/linux_drivers.html .. _dpdk-phy-multiqueue: @@ -218,18 +218,24 @@ If the log is not seen then the port can be detached like so:: Hotplugging with IGB_UIO ~~~~~~~~~~~~~~~~~~~~~~~~ -As of DPDK 19.11, default igb_uio hotplugging behavior changes from +.. important:: + + As of DPDK v20.11 IGB_UIO has been deprecated and is no longer built as + part of the default DPDK library. Below is intended for those who wish + to use IGB_UIO outside of the standard DPDK build from v20.11 onwards. + +As of DPDK v19.11, default igb_uio hotplugging behavior changed from previous DPDK versions. -With DPDK 19.11, if no device is bound to igb_uio when OVS is launched then -the IOVA mode may be set to virtual addressing for DPDK. This is incompatible -for hotplugging with igb_uio. +From DPDK v19.11 onwards, if no device is bound to igb_uio when OVS is +launched then the IOVA mode may be set to virtual addressing for DPDK. +This is incompatible for hotplugging with igb_uio. To hotplug a port with igb_uio in this case, DPDK must be configured to use physical addressing for IOVA mode. For more information regarding IOVA modes in DPDK please refer to the `DPDK IOVA Mode Detection`__. -__ https://doc.dpdk.org/guides-19.11/prog_guide/env_abstraction_layer.html#iova-mode-detection +__ https://doc.dpdk.org/guides-20.11/prog_guide/env_abstraction_layer.html#iova-mode-detection To configure OVS DPDK to use physical addressing for IOVA:: @@ -261,7 +267,7 @@ Representors are multi devices created on top of one PF. For more information, refer to the `DPDK documentation`__. -__ https://doc.dpdk.org/guides-19.11/prog_guide/switch_representation.html +__ https://doc.dpdk.org/guides-20.11/prog_guide/switch_representation.html Prior to port representors there was a one-to-one relationship between the PF and the eth device. With port representors the relationship becomes one PF to @@ -395,7 +401,7 @@ in the ``options`` column of the ``Interface`` table. kernel netdevice, and be inherited from it when Open vSwitch is restarted, even if the options described in this section are unset from Open vSwitch. -.. _bifurcated-drivers: http://doc.dpdk.org/guides/linux_gsg/linux_drivers.html#bifurcated-driver +.. _bifurcated-drivers: https://doc.dpdk.org/guides-20.11/linux_gsg/linux_drivers.html#bifurcated-driver - Configure the VF MAC address:: diff --git a/Documentation/topics/dpdk/vdev.rst b/Documentation/topics/dpdk/vdev.rst index 1c0df7f4b..7bd48165e 100644 --- a/Documentation/topics/dpdk/vdev.rst +++ b/Documentation/topics/dpdk/vdev.rst @@ -63,4 +63,4 @@ run:: More information on the different types of virtual DPDK PMDs can be found in the `DPDK documentation`__. -__ http://dpdk.org/doc/guides/nics/overview.html +__ https://doc.dpdk.org/guides-20.11/nics/overview.html diff --git a/Documentation/topics/dpdk/vhost-user.rst b/Documentation/topics/dpdk/vhost-user.rst index 75d3fc958..bcd51e65c 100644 --- a/Documentation/topics/dpdk/vhost-user.rst +++ b/Documentation/topics/dpdk/vhost-user.rst @@ -389,23 +389,7 @@ application in the VM. To begin, instantiate a guest as described in :ref:`dpdk-vhost-user` or :ref:`dpdk-vhost-user-client`. Once started, connect to the VM, download the -DPDK sources to VM and build DPDK:: - - $ cd /root/dpdk/ - $ wget https://fast.dpdk.org/rel/dpdk-19.11.2.tar.xz - $ tar xf dpdk-19.11.2.tar.xz - $ export DPDK_DIR=/root/dpdk/dpdk-stable-19.11.2 - $ export DPDK_TARGET=x86_64-native-linuxapp-gcc - $ export DPDK_BUILD=$DPDK_DIR/$DPDK_TARGET - $ cd $DPDK_DIR - $ make install T=$DPDK_TARGET DESTDIR=install - -Build the test-pmd application:: - - $ cd app/test-pmd - $ export RTE_SDK=$DPDK_DIR - $ export RTE_TARGET=$DPDK_TARGET - $ make +DPDK sources to VM and build DPDK as described in :ref:`dpdk-install`. Setup huge pages and DPDK devices using UIO:: @@ -555,4 +539,4 @@ shown with:: Further information can be found in the `DPDK documentation -<https://doc.dpdk.org/guides-19.11/prog_guide/vhost_lib.html>`__ +<https://doc.dpdk.org/guides-20.11/prog_guide/vhost_lib.html>`__ diff --git a/Documentation/topics/testing.rst b/Documentation/topics/testing.rst index b9fa94dda..951fe9e85 100644 --- a/Documentation/topics/testing.rst +++ b/Documentation/topics/testing.rst @@ -353,7 +353,7 @@ All tests are skipped if no hugepages are configured. User must look into the DP manual to figure out how to `Configure hugepages`_. The phy test will skip if no compatible physical device is available. -.. _Configure hugepages: https://doc.dpdk.org/guides-19.11/linux_gsg/sys_reqs.html +.. _Configure hugepages: https://doc.dpdk.org/guides-20.11/linux_gsg/sys_reqs.html All the features documented under `Unit Tests`_ are available for the DPDK datapath testsuite. diff --git a/Documentation/topics/userspace-tso.rst b/Documentation/topics/userspace-tso.rst index 14a7c6fb3..bd64e7ed3 100644 --- a/Documentation/topics/userspace-tso.rst +++ b/Documentation/topics/userspace-tso.rst @@ -46,7 +46,7 @@ datasheet for compatibility. Secondly, the NIC must have an associated DPDK Poll Mode Driver (PMD) which supports `TSO`. For a list of features per PMD, refer to the `DPDK documentation`__. -__ https://doc.dpdk.org/guides-19.11/nics/overview.html +__ https://doc.dpdk.org/guides-20.11/nics/overview.html Enabling TSO ~~~~~~~~~~~~ diff --git a/NEWS b/NEWS index 7e291a180..1a39cc661 100644 --- a/NEWS +++ b/NEWS @@ -11,6 +11,7 @@ Post-v2.14.0 Use the 'cluster/set-backlog-threshold' command to change limits. - DPDK: * Removed support for vhost-user dequeue zero-copy. + * Add support for DPDK 20.11. - Userspace datapath: * Add the 'pmd' option to "ovs-appctl dpctl/dump-flows", which restricts a flow dump to a single PMD thread if set. diff --git a/acinclude.m4 b/acinclude.m4 index ddf4b71e1..eb0496c25 100644 --- a/acinclude.m4 +++ b/acinclude.m4 @@ -334,8 +334,9 @@ dnl dnl Configure DPDK source tree AC_DEFUN([OVS_CHECK_DPDK], [ AC_ARG_WITH([dpdk], - [AC_HELP_STRING([--with-dpdk=/path/to/dpdk], - [Specify the DPDK build directory])], + [AC_HELP_STRING([--with-dpdk=static|shared|yes], + [Specify "static" or "shared" depending on the + DPDK libraries to use])], [have_dpdk=true]) AC_MSG_CHECKING([whether dpdk is enabled]) @@ -345,35 +346,45 @@ AC_DEFUN([OVS_CHECK_DPDK], [ else AC_MSG_RESULT([yes]) case "$with_dpdk" in - yes) - DPDK_AUTO_DISCOVER="true" - PKG_CHECK_MODULES_STATIC([DPDK], [libdpdk], [ - DPDK_INCLUDE="$DPDK_CFLAGS" - DPDK_LIB="$DPDK_LIBS"], [ - DPDK_INCLUDE="-I/usr/local/include/dpdk -I/usr/include/dpdk" - DPDK_LIB="-ldpdk"]) - ;; - *) - DPDK_AUTO_DISCOVER="false" - DPDK_INCLUDE_PATH="$with_dpdk/include" - # If 'with_dpdk' is passed install directory, point to headers - # installed in $DESTDIR/$prefix/include/dpdk - if test -e "$DPDK_INCLUDE_PATH/rte_config.h"; then - DPDK_INCLUDE="-I$DPDK_INCLUDE_PATH" - elif test -e "$DPDK_INCLUDE_PATH/dpdk/rte_config.h"; then - DPDK_INCLUDE="-I$DPDK_INCLUDE_PATH/dpdk" - fi - DPDK_LIB_DIR="$with_dpdk/lib" - DPDK_LIB="-ldpdk" - ;; + "shared") + PKG_CHECK_MODULES([DPDK], [libdpdk], [ + DPDK_INCLUDE="$DPDK_CFLAGS" + DPDK_LIB="$DPDK_LIBS"], [ + DPDK_INCLUDE="-I/usr/local/include/dpdk -I/usr/include/dpdk" + DPDK_LIB="-ldpdk"]) + ;; + "static" | "yes") + PKG_CHECK_MODULES_STATIC([DPDK], [libdpdk], [ + DPDK_INCLUDE="$DPDK_CFLAGS" + DPDK_LIB="$DPDK_LIBS"], [ + DPDK_INCLUDE="-I/usr/local/include/dpdk -I/usr/include/dpdk" + DPDK_LIB="-ldpdk"]) + + dnl Statically linked private DPDK objects of form + dnl -l:file.a must be positioned between + dnl --whole-archive ... --no-whole-archive linker parameters. + dnl Old pkg-config versions misplace --no-whole-archive parameter + dnl and put it next to --whole-archive. + AC_MSG_CHECKING([for faulty pkg-config version]) + echo "$DPDK_LIB" | grep -q 'whole-archive.*l:lib.*no-whole-archive' + status=$? + case $status in + 0) + AC_MSG_RESULT([no]) + ;; + 1) + AC_MSG_RESULT([yes]) + AC_MSG_ERROR([Please upgrade.pkg-config]) + ;; + *) + AC_MSG_ERROR([grep exited with status $status]) + ;; + esac esac ovs_save_CFLAGS="$CFLAGS" ovs_save_LDFLAGS="$LDFLAGS" CFLAGS="$CFLAGS $DPDK_INCLUDE" - if test "$DPDK_AUTO_DISCOVER" = "false"; then - LDFLAGS="$LDFLAGS -L${DPDK_LIB_DIR}" - fi AC_CHECK_HEADERS([rte_config.h], [], [ AC_MSG_ERROR([unable to find rte_config.h in $with_dpdk]) @@ -422,20 +433,18 @@ AC_DEFUN([OVS_CHECK_DPDK], [ [AC_MSG_RESULT([yes]) DPDKLIB_FOUND=true], [AC_MSG_RESULT([no]) - if test "$DPDK_AUTO_DISCOVER" = "true"; then - AC_MSG_ERROR(m4_normalize([ - Could not find DPDK library in default search path, Use --with-dpdk - to specify the DPDK library installed in non-standard location])) - else - AC_MSG_ERROR([Could not find DPDK libraries in $DPDK_LIB_DIR]) - fi + AC_MSG_ERROR(m4_normalize([ + Could not find DPDK library in default search path, update + PKG_CONFIG_PATH for pkg-config to find the .pc file in + non-standard location])) ]) CFLAGS="$ovs_save_CFLAGS" LDFLAGS="$ovs_save_LDFLAGS" - if test "$DPDK_AUTO_DISCOVER" = "false"; then - OVS_LDFLAGS="$OVS_LDFLAGS -L$DPDK_LIB_DIR" - fi + # Stripping out possible instruction set specific configuration that DPDK + # forces in pkg-config since this could override user-specified options. + # It's enough to have -mssse3 to build with DPDK headers. + DPDK_INCLUDE=$(echo "$DPDK_INCLUDE" | sed 's/-march=[[^ ]]*//g') OVS_CFLAGS="$OVS_CFLAGS $DPDK_INCLUDE" OVS_ENABLE_OPTION([-mssse3]) @@ -444,17 +453,16 @@ AC_DEFUN([OVS_CHECK_DPDK], [ # This happens because the rest of the DPDK code doesn't use any symbol in # the pmd driver objects, and the drivers register themselves using an # __attribute__((constructor)) function. - # - # These options are specified inside a single -Wl directive to prevent - # autotools from reordering them. - # - # OTOH newer versions of dpdk pkg-config (generated with Meson) - # will already have flagged just the right set of libs with - # --whole-archive - in those cases do not wrap it once more. - case "$DPDK_LIB" in - *whole-archive*) DPDK_vswitchd_LDFLAGS=$DPDK_LIB;; - *) DPDK_vswitchd_LDFLAGS=-Wl,--whole-archive,$DPDK_LIB,--no-whole-archive - esac + + # Wrap the DPDK libraries inside a single -Wl directive + # after comma separation to prevent autotools from reordering them. + DPDK_vswitchd_LDFLAGS=$(echo "$DPDK_LIB"| tr -s ' ' ',' | sed 's/-Wl,//g') + # Replace -pthread with -lpthread for LD and remove the last extra comma. + DPDK_vswitchd_LDFLAGS=$(echo "$DPDK_vswitchd_LDFLAGS"| sed 's/,$//' | \ + sed 's/-pthread/-lpthread/g') + # Prepend "-Wl,". + DPDK_vswitchd_LDFLAGS="-Wl,$DPDK_vswitchd_LDFLAGS" + AC_SUBST([DPDK_vswitchd_LDFLAGS]) AC_DEFINE([DPDK_NETDEV], [1], [System uses the DPDK module.]) fi diff --git a/include/sparse/automake.mk b/include/sparse/automake.mk index 974ad3fe5..e96637119 100644 --- a/include/sparse/automake.mk +++ b/include/sparse/automake.mk @@ -11,7 +11,9 @@ noinst_HEADERS += \ include/sparse/netpacket/packet.h \ include/sparse/pthread.h \ include/sparse/rte_atomic.h \ + include/sparse/rte_mbuf.h \ include/sparse/rte_memcpy.h \ + include/sparse/rte_trace_point.h \ include/sparse/sys/socket.h \ include/sparse/sys/sysmacros.h \ include/sparse/sys/types.h \ diff --git a/include/sparse/rte_mbuf.h b/include/sparse/rte_mbuf.h new file mode 100644 index 000000000..981cdb441 --- /dev/null +++ b/include/sparse/rte_mbuf.h @@ -0,0 +1,29 @@ +/* Copyright (c) 2020 Intel, Inc. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CHECKER__ +#error "Use this header only with sparse. It is not a correct implementation." +#endif + +/* sparse doesn't know about gcc atomic builtins. */ +#ifndef __ATOMIC_ACQ_REL +#define __ATOMIC_ACQ_REL 0 +#define __ATOMIC_RELAXED 1 +#define __atomic_add_fetch(p, val, memorder) (*(p) = *(p) + (val)) +#define __atomic_store_n(p, val, memorder) (*(p) = (val)) +#endif + +/* Get actual <rte_mbuf.h> definitions for us to annotate and build on. */ +#include_next <rte_mbuf.h> diff --git a/include/sparse/rte_trace_point.h b/include/sparse/rte_trace_point.h new file mode 100644 index 000000000..803923275 --- /dev/null +++ b/include/sparse/rte_trace_point.h @@ -0,0 +1,28 @@ +/* Copyright 2020, Red Hat, Inc. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CHECKER__ +#error "Use this header only with sparse. It is not a correct implementation." +#endif + +/* sparse doesn't know about gcc atomic builtins. */ +#ifndef __ATOMIC_ACQUIRE +#define __ATOMIC_ACQUIRE 0 +#define __atomic_load_n(p, memorder) *(p) +#endif + +/* Get actual <rte_trace_point.h> definitions for us to annotate and + * build on. */ +#include_next <rte_trace_point.h> diff --git a/lib/dpdk.c b/lib/dpdk.c index 2f235a742..319540394 100644 --- a/lib/dpdk.c +++ b/lib/dpdk.c @@ -443,7 +443,7 @@ dpdk_init__(const struct smap *ovs_other_config) /** * NOTE: This is an unsophisticated mechanism for determining the DPDK - * lcore for the DPDK Master. + * main core. */ if (auto_determine) { const struct ovs_numa_info_core *core; diff --git a/lib/netdev-dpdk.c b/lib/netdev-dpdk.c index 75dffefb8..2640a421a 100644 --- a/lib/netdev-dpdk.c +++ b/lib/netdev-dpdk.c @@ -26,12 +26,6 @@ #include <sys/socket.h> #include <linux/if.h> -/* Include rte_compat.h first to allow experimental API's needed for the - * rte_meter.h rfc4115 functions. Once they are no longer marked as - * experimental the #define and rte_compat.h include can be removed. - */ -#define ALLOW_EXPERIMENTAL_API -#include <rte_compat.h> #include <rte_bus_pci.h> #include <rte_config.h> #include <rte_cycles.h> @@ -1312,7 +1306,7 @@ static int vhost_common_construct(struct netdev *netdev) OVS_REQUIRES(dpdk_mutex) { - int socket_id = rte_lcore_to_socket_id(rte_get_master_lcore()); + int socket_id = rte_lcore_to_socket_id(rte_get_main_lcore()); struct netdev_dpdk *dev = netdev_dpdk_cast(netdev); dev->vhost_rxq_enabled = dpdk_rte_mzalloc(OVS_VHOST_MAX_QUEUE_NUM * @@ -1463,7 +1457,6 @@ netdev_dpdk_destruct(struct netdev *netdev) struct netdev_dpdk *dev = netdev_dpdk_cast(netdev); struct rte_device *rte_dev; struct rte_eth_dev *eth_dev; - bool remove_on_close; ovs_mutex_lock(&dpdk_mutex); @@ -1475,20 +1468,15 @@ netdev_dpdk_destruct(struct netdev *netdev) * FIXME: avoid direct access to DPDK internal array rte_eth_devices. */ eth_dev = &rte_eth_devices[dev->port_id]; - remove_on_close = - eth_dev->data && - (eth_dev->data->dev_flags & RTE_ETH_DEV_CLOSE_REMOVE); rte_dev = eth_dev->device; /* Remove the eth device. */ rte_eth_dev_close(dev->port_id); - /* Remove this rte device and all its eth devices if flag - * RTE_ETH_DEV_CLOSE_REMOVE is not supported (which means representors - * are not supported), or if all the eth devices belonging to the rte - * device are closed. + /* Remove this rte device and all its eth devices if all the eth + * devices belonging to the rte device are closed. */ - if (!remove_on_close || !netdev_dpdk_get_num_ports(rte_dev)) { + if (!netdev_dpdk_get_num_ports(rte_dev)) { int ret = rte_dev_remove(rte_dev); if (ret < 0) {