@@ -107,9 +107,6 @@ exclude_patterns = ['_build', 'Thumbs.db', '.DS_Store']
#
# show_authors = False
-# The name of the Pygments (syntax highlighting) style to use.
-# pygments_style = 'friendly'
-
# A list of ignored prefixes for module index sorting.
# modindex_common_prefix = []
@@ -115,9 +115,11 @@ Titles
Code
~~~~
-- Use ``::``, the ``code`` role or the ``code-block:: <syntax>`` role to prefix
- code. The ``code-block:: <syntax>`` format is preferred as this provides
- syntax highlighting for non-Python languages, such as Bash or PowerShell.
+- Use ``::`` to prefix code.
+
+- Don't use syntax highlighting such as ``.. highlight:: <syntax>`` or
+ ``code-block:: <syntax>`` because it depends on external ``pygments``
+ library.
- Prefix commands with ``$``.
@@ -259,7 +261,7 @@ Figures and Other Media
- All images should be in PNG format and compressed where possible. For PNG
files, use OptiPNG and AdvanceCOMP's ``advpng``:
- .. code-block:: shell
+ ::
$ optipng -o7 -zm1-9 -i0 -strip all <path_to_png>
$ advpng -z4 <path_to_png>
@@ -63,7 +63,7 @@ The following explains the steps in some detail.
We require that you have Python six and pypiwin32 libraries installed.
The libraries can be installed via pip command:
- .. code-block:: console
+ ::
$ pip install six
$ pip install pypiwin32
@@ -140,7 +140,7 @@ you pulled the sources directly from an Open vSwitch Git tree or got a
Git tree snapshot, then run boot.sh in the top source directory to build
the "configure" script:
-.. code-block:: console
+::
$ ./boot.sh
@@ -153,7 +153,7 @@ Configure the package by running the configure script. You should provide some
configure options to choose the right compiler, linker, libraries, Open vSwitch
component installation directories, etc. For example:
-.. code-block:: console
+::
$ ./configure CC=./build-aux/cccl LD="$(which link)" \
LIBS="-lws2_32 -liphlpapi -lwbemuuid -lole32 -loleaut32" \
@@ -169,7 +169,7 @@ component installation directories, etc. For example:
To configure with SSL support, add the requisite additional options:
-.. code-block:: console
+::
$ ./configure CC=./build-aux/cccl LD="`which link`" \
LIBS="-lws2_32 -liphlpapi -lwbemuuid -lole32 -loleaut32" \
@@ -181,7 +181,7 @@ To configure with SSL support, add the requisite additional options:
Finally, to the kernel module also:
-.. code-block:: console
+::
$ ./configure CC=./build-aux/cccl LD="`which link`" \
LIBS="-lws2_32 -liphlpapi -lwbemuuid -lole32 -loleaut32" \
@@ -211,7 +211,7 @@ building on Linux, FreeBSD, or NetBSD.
#. Run make for the ported executables in the top source directory, e.g.:
- .. code-block:: console
+ ::
$ make
@@ -225,25 +225,25 @@ building on Linux, FreeBSD, or NetBSD.
all MinGW sessions and then run the below command from MSVC developers
command prompt.:
- .. code-block:: doscon
+ ::
> mingw-get upgrade msys-core-bin=1.0.17-1
#. To run all the unit tests in Open vSwitch, one at a time:
- .. code-block:: console
+ ::
$ make check
To run all the unit tests in Open vSwitch, up to 8 in parallel:
- .. code-block:: console
+ ::
$ make check TESTSUITEFLAGS="-j8"
#. To install all the compiled executables on the local machine, run:
- .. code-block:: console
+ ::
$ make install
@@ -276,7 +276,7 @@ Now run ``./uninstall.cmd`` to remove the old extension. Once complete, run
turn on ``TESTSIGNING`` boot option or 'Disable Driver Signature
Enforcement' during boot. The following commands can be used:
-.. code-block:: doscon
+::
> bcdedit /set LOADOPTIONS DISABLE_INTEGRITY_CHECKS
> bcdedit /set TESTSIGNING ON
@@ -294,7 +294,7 @@ to work (covered later).
The command to create a new switch named 'OVS-Extended-Switch' using a physical
NIC named 'Ethernet 1' is:
-.. code-block:: ps1con
+::
PS > New-VMSwitch "OVS-Extended-Switch" -NetAdapterName "Ethernet 1"
@@ -307,7 +307,7 @@ In the properties of any switch, you should should now see "Open vSwitch
Extension" under 'Extensions'. Click the check box to enable the extension.
An alternative way to do the same is to run the following command:
-.. code-block:: ps1con
+::
PS > Enable-VMSwitchExtension "Open vSwitch Extension" OVS-Extended-Switch
@@ -330,7 +330,7 @@ database, ovsdb-server. Each machine on which Open vSwitch is installed should
run its own copy of ovsdb-server. Before ovsdb-server itself can be started,
configure a database that it can use:
-.. code-block:: doscon
+::
> ovsdb-tool create C:\openvswitch\etc\openvswitch\conf.db \
C:\openvswitch\usr\share\openvswitch\vswitch.ovsschema
@@ -338,7 +338,7 @@ configure a database that it can use:
Configure ovsdb-server to use database created above and to listen on a Unix
domain socket:
-.. code-block:: doscon
+::
> ovsdb-server -vfile:info --remote=punix:db.sock --log-file \
--pidfile --detach
@@ -351,7 +351,7 @@ Initialize the database using ovs-vsctl. This is only necessary the first time
after you create the database with ovsdb-tool, though running it at any time is
harmless:
-.. code-block:: doscon
+::
> ovs-vsctl --no-wait init
@@ -359,14 +359,14 @@ harmless:
If you would later like to terminate the started ovsdb-server, run:
- .. code-block:: doscon
+ ::
> ovs-appctl -t ovsdb-server exit
Start the main Open vSwitch daemon, telling it to connect to the same Unix
domain socket:
-.. code-block:: doscon
+::
> ovs-vswitchd -vfile:info --log-file --pidfile --detach
@@ -374,7 +374,7 @@ domain socket:
If you would like to terminate the started ovs-vswitchd, run:
- .. code-block:: doscon
+ ::
> ovs-appctl exit
@@ -394,7 +394,7 @@ Add bridges
Let's start by creating an integration bridge, ``br-int`` and a PIF bridge,
``br-pif``:
-.. code-block:: doscon
+::
> ovs-vsctl add-br br-int
> ovs-vsctl add-br br-pif
@@ -408,7 +408,7 @@ Let's start by creating an integration bridge, ``br-int`` and a PIF bridge,
Validate that ports are added by dumping from both ovs-dpctl and ovs-vsctl:
-.. code-block:: doscon
+::
> ovs-dpctl show
system@ovs-system:
@@ -457,7 +457,7 @@ enable them and set the corresponding values to it to make them IP-able.
As a whole example, if we issue the following in a powershell console:
-.. code-block:: ps1con
+::
PS > Get-NetAdapter | select Name,InterfaceDescription
Name InterfaceDescription
@@ -476,13 +476,13 @@ We can see that we have a switch(external) created upon adapter name
'Ethernet0' with the internal ports under name 'br-pif' and 'br-int'. Thus
resulting into the following ovs-vsctl commands:
-.. code-block:: doscon
+::
> ovs-vsctl add-port br-pif Ethernet0
Dumping the ports should show the additional ports that were just added:
-.. code-block:: doscon
+::
> ovs-dpctl show
system@ovs-system:
@@ -525,7 +525,7 @@ is being addressed. After assigning the name ``ovs-port-a``, the VIF is
connected back to the Hyper-V switch with name ``OVS-HV-Switch``, which is
assumed to be the Hyper-V switch with OVS extension enabled.:
-.. code-block:: ps1con
+::
PS > import-module .\datapath-windows\misc\OVS.psm1
PS > $vnic = Get-VMNetworkAdapter <Name of the VM>
@@ -536,13 +536,13 @@ assumed to be the Hyper-V switch with OVS extension enabled.:
Next, add the VIFs to ``br-int``:
-.. code-block:: doscon
+::
> ovs-vsctl add-port br-int ovs-port-a
Dumping the ports should show the additional ports that were just added:
-.. code-block:: doscon
+::
> ovs-dpctl show
system@ovs-system:
@@ -582,7 +582,7 @@ found at technet_.
For example, to set up a switch team combined from ``Ethernet0 2`` and
``Ethernet1 2`` named ``external``:
-.. code-block:: ps1con
+::
PS > Get-NetAdapter
Name InterfaceDescription
@@ -602,7 +602,7 @@ For example, to set up a switch team combined from ``Ethernet0 2`` and
This will result in a new adapter bound to the host called ``external``:
-.. code-block:: ps1con
+::
PS > Get-NetAdapter
Name InterfaceDescription
@@ -617,7 +617,7 @@ This will result in a new adapter bound to the host called ``external``:
Next we will set up the Hyper-V VMSwitch on the new adapter ``external``:
-.. code-block:: ps1con
+::
PS > New-VMSwitch -Name external -NetAdapterName external \
-AllowManagementOS $false
@@ -628,7 +628,7 @@ Under OVS the adapters under the team ``external``, ``Ethernet0 2`` and
The following example shows how the bridges look with the NICs being
separated:
-.. code-block:: doscon
+::
> ovs-vsctl show
6cd9481b-c249-4ee3-8692-97b399dd29d8
@@ -653,7 +653,7 @@ Switch VLAN tagging along with patch ports between ``br-int`` and ``br-pif`` is
used to configure VLAN tagging functionality between two VMs on different
Hyper-Vs. To start, add a patch port from ``br-int`` to ``br-pif``:
-.. code-block:: doscon
+::
> ovs-vsctl add-port br-int patch-to-pif
> ovs-vsctl set interface patch-to-pif type=patch \
@@ -661,7 +661,7 @@ Hyper-Vs. To start, add a patch port from ``br-int`` to ``br-pif``:
Add a patch port from ``br-pif`` to ``br-int``:
-.. code-block:: doscon
+::
> ovs-vsctl add-port br-pif patch-to-int
> ovs-vsctl set interface patch-to-int type=patch \
@@ -669,7 +669,7 @@ Add a patch port from ``br-pif`` to ``br-int``:
Re-Add the VIF ports with the VLAN tag:
-.. code-block:: doscon
+::
> ovs-vsctl add-port br-int ovs-port-a tag=900
> ovs-vsctl add-port br-int ovs-port-b tag=900
@@ -681,7 +681,7 @@ The Windows Open vSwitch implementation support VXLAN and STT tunnels. To add
tunnels. For example, first add the tunnel port between 172.168.201.101 <->
172.168.201.102:
-.. code-block:: doscon
+::
> ovs-vsctl add-port br-int tun-1
> ovs-vsctl set Interface tun-1 type=<port-type>
@@ -692,7 +692,7 @@ tunnels. For example, first add the tunnel port between 172.168.201.101 <->
...and the tunnel port between 172.168.201.101 <-> 172.168.201.105:
-.. code-block:: doscon
+::
> ovs-vsctl add-port br-int tun-2
> ovs-vsctl set Interface tun-2 type=<port-type>
@@ -717,14 +717,14 @@ daemons via ``make install``.
To start, create the database:
-.. code-block:: doscon
+::
> ovsdb-tool create C:/openvswitch/etc/openvswitch/conf.db \
"C:/openvswitch/usr/share/openvswitch/vswitch.ovsschema"
Create the ovsdb-server service and start it:
-.. code-block:: doscon
+::
> sc create ovsdb-server \
binpath="C:/openvswitch/usr/sbin/ovsdb-server.exe \
@@ -739,25 +739,25 @@ Create the ovsdb-server service and start it:
paths. You can make sure that the correct path has been registered with the
Windows services manager by running:
- .. code-block:: doscon
+ ::
> sc qc ovsdb-server
Check that the service is healthy by running:
-.. code-block:: doscon
+::
> sc query ovsdb-server
Initialize the database:
-.. code-block:: doscon
+::
> ovs-vsctl --no-wait init
Create the ovs-vswitchd service and start it:
-.. code-block:: doscon
+::
> sc create ovs-vswitchd \
binpath="C:/openvswitch/usr/sbin/ovs-vswitchd.exe \
@@ -766,13 +766,13 @@ Create the ovs-vswitchd service and start it:
Check that the service is healthy by running:
-.. code-block:: doscon
+::
> sc query ovs-vswitchd
To stop and delete the services, run:
-.. code-block:: doscon
+::
> sc stop ovs-vswitchd
> sc stop ovsdb-server
@@ -36,7 +36,7 @@ Python
The Python bindings are part of the `Open vSwitch package`__. You can install
the bindings using ``pip``:
-.. code-block:: shell
+::
$ pip install ovs
Current documentation uses syntax highlighting in 'sphinx' via 'pygments' library. This leads to build failures on the systems with old version of this library. In fact that only 'windows.rst' uses highlighting it's a very simple change. This helps us to avoid build issues on different systems and allows to remove painful external dependency. Signed-off-by: Ilya Maximets <i.maximets@samsung.com> --- Documentation/conf.py | 3 - .../internals/contributing/documentation-style.rst | 10 ++- Documentation/intro/install/windows.rst | 88 +++++++++++----------- Documentation/topics/language-bindings.rst | 2 +- 4 files changed, 51 insertions(+), 52 deletions(-)