@@ -20,7 +20,7 @@ struct fdt_gpio {
int (*xlate)(struct gpio_chip *chip,
const struct fdt_phandle_args *pargs,
struct gpio_pin *out_pin);
- int (*init)(const void *fdt, int nodeoff, u32 phandle,
+ int (*init)(const void *fdt, int nodeoff,
const struct fdt_match *match);
};
@@ -16,17 +16,12 @@
extern struct fdt_gpio *fdt_gpio_drivers[];
extern unsigned long fdt_gpio_drivers_size;
-static int fdt_gpio_init(const void *fdt, u32 phandle)
+static int fdt_gpio_init(const void *fdt, int nodeoff)
{
- int pos, nodeoff, rc;
+ int pos, rc;
struct fdt_gpio *drv;
const struct fdt_match *match;
- /* Find node offset */
- nodeoff = fdt_node_offset_by_phandle(fdt, phandle);
- if (nodeoff < 0)
- return nodeoff;
-
/* Check "gpio-controller" property */
if (!fdt_getprop(fdt, nodeoff, "gpio-controller", &rc))
return SBI_EINVAL;
@@ -37,7 +32,7 @@ static int fdt_gpio_init(const void *fdt, u32 phandle)
match = fdt_match_node(fdt, nodeoff, drv->match_table);
if (match && drv->init) {
- rc = drv->init(fdt, nodeoff, phandle, match);
+ rc = drv->init(fdt, nodeoff, match);
if (rc == SBI_ENODEV)
continue;
if (rc)
@@ -49,20 +44,20 @@ static int fdt_gpio_init(const void *fdt, u32 phandle)
return SBI_ENOSYS;
}
-static int fdt_gpio_chip_find(const void *fdt, u32 phandle,
+static int fdt_gpio_chip_find(const void *fdt, int nodeoff,
struct gpio_chip **out_chip)
{
int rc;
- struct gpio_chip *chip = gpio_chip_find(phandle);
+ struct gpio_chip *chip = gpio_chip_find(nodeoff);
if (!chip) {
/* GPIO chip not found so initialize matching driver */
- rc = fdt_gpio_init(fdt, phandle);
+ rc = fdt_gpio_init(fdt, nodeoff);
if (rc)
return rc;
/* Try to find GPIO chip again */
- chip = gpio_chip_find(phandle);
+ chip = gpio_chip_find(nodeoff);
if (!chip)
return SBI_ENOSYS;
}
@@ -77,7 +72,6 @@ int fdt_gpio_pin_get(const void *fdt, int nodeoff, int index,
struct gpio_pin *out_pin)
{
int rc;
- u32 phandle;
struct fdt_gpio *drv;
struct gpio_chip *chip = NULL;
struct fdt_phandle_args pargs;
@@ -92,8 +86,7 @@ int fdt_gpio_pin_get(const void *fdt, int nodeoff, int index,
if (rc)
return rc;
- phandle = fdt_get_phandle(fdt, pargs.node_offset);
- rc = fdt_gpio_chip_find(fdt, phandle, &chip);
+ rc = fdt_gpio_chip_find(fdt, pargs.node_offset, &chip);
if (rc)
return rc;
@@ -78,7 +78,7 @@ static void dw_gpio_set(struct gpio_pin *gp, int value)
* bank A is the only one with irq support but we're not using it here
*/
-static int dw_gpio_init_bank(const void *fdt, int nodeoff, u32 phandle,
+static int dw_gpio_init_bank(const void *fdt, int nodeoff,
const struct fdt_match *match)
{
struct dw_gpio_chip *chip;
@@ -115,7 +115,7 @@ static int dw_gpio_init_bank(const void *fdt, int nodeoff, u32 phandle,
chip->dr = (void *)(uintptr_t)addr + (bank * 0xc);
chip->ext = (void *)(uintptr_t)addr + (bank * 4) + 0x50;
chip->chip.driver = &fdt_gpio_designware;
- chip->chip.id = phandle;
+ chip->chip.id = nodeoff;
chip->chip.ngpio = nr_pins;
chip->chip.set = dw_gpio_set;
chip->chip.direction_output = dw_gpio_direction_output;
@@ -62,7 +62,7 @@ static void sifive_gpio_set(struct gpio_pin *gp, int value)
extern struct fdt_gpio fdt_gpio_sifive;
-static int sifive_gpio_init(const void *fdt, int nodeoff, u32 phandle,
+static int sifive_gpio_init(const void *fdt, int nodeoff,
const struct fdt_match *match)
{
int rc;
@@ -81,7 +81,7 @@ static int sifive_gpio_init(const void *fdt, int nodeoff, u32 phandle,
chip->addr = addr;
chip->chip.driver = &fdt_gpio_sifive;
- chip->chip.id = phandle;
+ chip->chip.id = nodeoff;
chip->chip.ngpio = SIFIVE_GPIO_PINS_DEF;
chip->chip.direction_output = sifive_gpio_direction_output;
chip->chip.set = sifive_gpio_set;
@@ -71,7 +71,7 @@ static void starfive_gpio_set(struct gpio_pin *gp, int value)
extern struct fdt_gpio fdt_gpio_starfive;
-static int starfive_gpio_init(const void *fdt, int nodeoff, u32 phandle,
+static int starfive_gpio_init(const void *fdt, int nodeoff,
const struct fdt_match *match)
{
int rc;
@@ -90,7 +90,7 @@ static int starfive_gpio_init(const void *fdt, int nodeoff, u32 phandle,
chip->addr = addr;
chip->chip.driver = &fdt_gpio_starfive;
- chip->chip.id = phandle;
+ chip->chip.id = nodeoff;
chip->chip.ngpio = STARFIVE_GPIO_PINS_DEF;
chip->chip.direction_output = starfive_gpio_direction_output;
chip->chip.set = starfive_gpio_set;
Since the FDT is not modified during driver initialization, node offsets are just as suitable as phandles for use as identifiers: they are stable and unique. With this change, it is no longer necessary to pass the phandle to the driver init functions, so these init functions now use the same prototype as other kinds of drivers. This matches what is already done for I2C adapters. Signed-off-by: Samuel Holland <samuel.holland@sifive.com> --- include/sbi_utils/gpio/fdt_gpio.h | 2 +- lib/utils/gpio/fdt_gpio.c | 23 ++++++++--------------- lib/utils/gpio/fdt_gpio_designware.c | 4 ++-- lib/utils/gpio/fdt_gpio_sifive.c | 4 ++-- lib/utils/gpio/fdt_gpio_starfive.c | 4 ++-- 5 files changed, 15 insertions(+), 22 deletions(-)