@@ -117,7 +117,8 @@ nobase_include_HEADERS += \
osmocom/vty/telnet_interface.h \
osmocom/vty/vector.h \
osmocom/vty/vty.h \
- osmocom/vty/ports.h
+ osmocom/vty/ports.h \
+ osmocom/ctrl/control_vty.h
endif
noinst_HEADERS = \
new file mode 100644
@@ -0,0 +1,9 @@
+#pragma once
+
+/* Add the 'ctrl' section to VTY, containing the 'bind' command. */
+int ctrl_vty_init(void *ctx);
+
+/* Obtain the IP address configured by the 'ctrl'/'bind A.B.C.D' VTY command.
+ * This should be fed to ctrl_interface_setup() once the configuration has been
+ * read. */
+const char *ctrl_vty_get_bind_addr(void);
@@ -83,6 +83,7 @@ enum node_type {
L_IPA_NODE, /*!< \brief IPA proxying commands in libosmo-abis. */
L_NS_NODE, /*!< \brief NS node in libosmo-gb. */
L_BSSGP_NODE, /*!< \brief BSSGP node in libosmo-gb. */
+ L_CTRL_NODE, /*!< \brief Control interface node. */
/*
* When adding new nodes to the libosmocore project, these nodes can be
@@ -91,7 +92,6 @@ enum node_type {
RESERVED1_NODE, /*!< \brief Reserved for later extensions */
RESERVED2_NODE, /*!< \brief Reserved for later extensions */
RESERVED3_NODE, /*!< \brief Reserved for later extensions */
- RESERVED4_NODE, /*!< \brief Reserved for later extensions */
_LAST_OSMOVTY_NODE
};
@@ -13,3 +13,7 @@ libosmoctrl_la_LIBADD = \
$(top_builddir)/src/libosmocore.la \
$(top_builddir)/src/gsm/libosmogsm.la \
$(top_builddir)/src/vty/libosmovty.la
+
+if ENABLE_VTY
+libosmoctrl_la_SOURCES += control_vty.c
+endif
new file mode 100644
@@ -0,0 +1,90 @@
+/* VTY configuration for Control interface
+ *
+ * (C) 2016 by sysmocom s.m.f.c GmbH <info@sysmocom.de>
+ *
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <stdlib.h>
+#include <talloc.h>
+#include <osmocom/ctrl/control_vty.h>
+#include <osmocom/vty/command.h>
+
+static void *ctrl_vty_ctx = NULL;
+static const char *ctrl_vty_bind_addr = NULL;
+
+DEFUN(cfg_ctrl_bind_addr,
+ cfg_ctrl_bind_addr_cmd,
+ "bind A.B.C.D",
+ "Set bind address to listen for Control connections\n"
+ "Local IP address (default 127.0.0.1)\n")
+{
+ if (ctrl_vty_bind_addr) {
+ talloc_free((void*)ctrl_vty_bind_addr);
+ ctrl_vty_bind_addr = NULL;
+ }
+ ctrl_vty_bind_addr = talloc_strdup(ctrl_vty_ctx, argv[0]);
+ return CMD_SUCCESS;
+}
+
+const char *ctrl_vty_get_bind_addr(void)
+{
+ if (!ctrl_vty_bind_addr)
+ return "127.0.0.1";
+ return ctrl_vty_bind_addr;
+}
+
+struct cmd_node ctrl_node = {
+ L_CTRL_NODE,
+ "%s(config-ctrl)# ",
+ 1,
+};
+
+DEFUN(cfg_ctrl,
+ cfg_ctrl_cmd,
+ "ctrl", "Configure the Control Interface")
+{
+ vty->index = NULL;
+ vty->node = L_CTRL_NODE;
+
+ return CMD_SUCCESS;
+}
+
+static int config_write_ctrl(struct vty *vty)
+{
+ /* So far there's only one element. Omit the entire section if the bind
+ * element is omitted. */
+ if (!ctrl_vty_bind_addr)
+ return CMD_SUCCESS;
+
+ vty_out(vty, "ctrl%s", VTY_NEWLINE);
+ vty_out(vty, " bind %s%s", ctrl_vty_bind_addr, VTY_NEWLINE);
+
+ return CMD_SUCCESS;
+}
+
+int ctrl_vty_init(void *ctx)
+{
+ ctrl_vty_ctx = ctx;
+ install_element(CONFIG_NODE, &cfg_ctrl_cmd);
+ install_node(&ctrl_node, config_write_ctrl);
+
+ install_element(L_CTRL_NODE, &cfg_ctrl_bind_addr_cmd);
+ return 0;
+}
+
This may seem like overkill for a mere const char * config item, but it makes the Control interface VTY commands reusable in any main() scope (inspired by libosmo-abis' VTY config). Add API functions ctrl_vty_init() and ctrl_vty_get_bind_addr(), in new files src/ctrl/control_vty.c and include/osmocom/ctrl/control_vty.h, compiled and/or installed dependent on ENABLE_VTY. Using these functions allows configuring a static const char* with the VTY commands ctrl bind A.B.C.D which callers shall subsequently use to bind the Control interface to a specific local interface address, by passing the return value of ctrl_vty_get_bind_addr() to control_interface_setup(). Add CTRL_NODE to enum node_type, "eating" RESERVED4_NODE to heed that comment on avoiding ABI changes. --- include/Makefile.am | 3 +- include/osmocom/ctrl/control_vty.h | 9 ++++ include/osmocom/vty/command.h | 2 +- src/ctrl/Makefile.am | 4 ++ src/ctrl/control_vty.c | 90 ++++++++++++++++++++++++++++++++++++++ 5 files changed, 106 insertions(+), 2 deletions(-) create mode 100644 include/osmocom/ctrl/control_vty.h create mode 100644 src/ctrl/control_vty.c