new file mode 100644
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/nuvoton,i3c-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM845 I3C master
+
+maintainers:
+ - Stanley Chu <yschu@nuvoton.com>
+ - James Chiang <cpchiang1@nuvoton.com>
+
+allOf:
+ - $ref: i3c.yaml#
+
+properties:
+ compatible:
+ const: nuvoton,npcm845-i3c
+
+ reg:
+ items:
+ - description: I3C registers
+ - description: GDMA registers
+ - description: GDMA request control register
+
+ reg-names:
+ items:
+ - const: i3c
+ - const: dma
+ - const: dma_ctl
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: system clock
+ - description: bus clock
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: fast_clk
+
+ resets:
+ maxItems: 1
+
+ i3c-pp-scl-hi-period-ns:
+ minimum: 40
+ maximum: 160
+ description: |
+ If need to configure SCL with required duty cycle, specify the clock high/low period directly.
+ i3c-pp-scl-hi-perios-ns specifies the high period ns of the SCL clock cycle in push pull mode
+ When i3c-pp-scl-hi-period-ns and i3c-pp-scl-lo-period-ns are specified, the i3c pp frequency is
+ decided by these two properties.
+
+ i3c-pp-scl-lo-period-ns:
+ minimum: 40
+ maximum: 310
+ description: |
+ The low period ns of the SCL clock cycle in push pull mode. i3c-pp-scl-lo-period-ns should not
+ be less than i3c-pp-scl-hi-period-ns and the maximal value is i3c-pp-scl-hi-period-ns + 150.
+
+ i3c-pp-sda-rd-skew:
+ minimum: 1
+ maximum: 7
+ description: |
+ The number of MCLK clock periods to delay the SDA transition from the SCL clock edge at push
+ pull operation when transfers i3c private read.
+
+ i3c-pp-sda-wr-skew:
+ minimum: 1
+ maximum: 7
+ description: |
+ The number of MCLK clock periods to delay the SDA transition from the SCL clock edge at push
+ pull operation when transfers i3c private write.
+
+ i3c-od-scl-hi-period-ns:
+ description: |
+ The i3c open drain frequency is 1MHz by default.
+ If need to use different frequency, specify the clock high/low period directly.
+ i3c-od-scl-hi-perios-ns specifies the high period ns of the SCL clock cycle in open drain mode.
+ When i3c-od-scl-hi-period-ns and i3c-od-scl-lo-period-ns are specified, the i3c od frequency is
+ decided by these two properties.
+ i3c-od-scl-hi-period-ns should be equal to i3c-pp-scl-hi-period-ns or i3c-od-scl-lo-period-ns.
+
+ i3c-od-scl-lo-period-ns:
+ minimum: 200
+ description: |
+ The low period ns of the SCL clock cycle in open drain mode. i3c-od-scl-lo-period-ns should be
+ multiple of i3c-pp-scl-hi-period-ns.
+
+ enable-hj:
+ type: boolean
+ description: |
+ Enable SLVSTART interrupt for receiving hot-join request.
+
+ use-dma:
+ type: boolean
+ description: |
+ Enable the i3c private transfers using DMA.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clock-names
+ - clocks
+
+additionalProperties: true
+
+examples:
+ - |
+ i3c-master@fff10000 {
+ compatible = "nuvoton,npcm845-i3c";
+ clocks = <&clk 4>, <&clk 26>;
+ clock-names = "pclk", "fast_clk";
+ interrupts = <0 224 4>;
+ reg = <0xfff10000 0x1000>,
+ <0xf0850000 0x1000>,
+ <0xf0800300 0x4>;
+ reg-names = "i3c", "dma", "dma_ctl";
+ resets = <&rstc 0x74 8>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ };