@@ -7,10 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device Tree Bindings
maintainers:
- - Rayn Chen <rayn_chen@aspeedtech.com>
-
-allOf:
- - $ref: /schemas/i2c/i2c-controller.yaml#
+ - Ryan Chen <ryan_chen@aspeedtech.com>
properties:
compatible:
@@ -49,6 +46,25 @@ properties:
description:
states that there is another master active on this bus
+ aspeed,enable-dma:
+ type: boolean
+ description: |
+ I2C bus enable dma mode transfer.
+
+ ASPEED ast2600 platform equipped with 16 I2C controllers that share a
+ single DMA engine. DTS files can specify the data transfer mode to/from
+ the device, either DMA or programmed I/O. However, hardware limitations
+ may require a DTS to manually allocate which controller can use DMA mode.
+ The "aspeed,enable-dma" property allows control of this.
+
+ In cases where one the hardware design results in a specific
+ controller handling a larger amount of data, a DTS would likely
+ enable DMA mode for that one controller.
+
+ aspeed,global-regs:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: The phandle of i2c global register node.
+
required:
- reg
- compatible
@@ -57,6 +73,26 @@ required:
unevaluatedProperties: false
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: aspeed,ast2600-i2cv2
+
+ then:
+ properties:
+ reg:
+ minItems: 2
+ required:
+ - aspeed,global-regs
+ else:
+ properties:
+ aspeed,global-regs: false
+ aspeed,enable-dma: false
+
+
examples:
- |
#include <dt-bindings/clock/aspeed-clock.h>
@@ -71,3 +107,15 @@ examples:
interrupts = <0>;
interrupt-parent = <&i2c_ic>;
};
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ i2c1: i2c@80 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "aspeed,ast2600-i2cv2";
+ reg = <0x80 0x80>, <0xc00 0x20>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ aspeed,global-regs = <&i2c_global>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ resets = <&syscon ASPEED_RESET_I2C>;
+ };
Update ASPEED I2C maintainers email. Add ast2600-i2cv2 compatible and aspeed,global-regs, aspeed,enable-dma and description for ast2600-i2cv2. Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com> --- .../devicetree/bindings/i2c/aspeed,i2c.yaml | 56 +++++++++++++++++-- 1 file changed, 52 insertions(+), 4 deletions(-)