| Message ID | 20221228062232.2003139-1-ryans@supermicro.com.tw |
|---|---|
| State | New |
| Headers | show |
| Series | Add Supermicro X13DEM BMC machine | expand |
Hi Ryan, Thanks for the patch. Please make sure to Cc the upstream lists: * linux-aspeed@lists.ozlabs.org * devicetree@vger.kernel.org and any other people or lists that are found by running scripts/get_maintainer.pl. Also, please run your patch through scripts/checkpatch.pl I have a few other comments and queries: On Wed, 28 Dec 2022, at 16:52, Ryan Sie wrote: > Signed-off-by: Ryan Sie <ryans@supermicro.com.tw> > --- > arch/arm/boot/dts/Makefile | 1 + > .../boot/dts/aspeed-bmc-supermicro-x13dem.dts | 476 ++++++++++++++++++ > 2 files changed, 477 insertions(+) > create mode 100644 arch/arm/boot/dts/aspeed-bmc-supermicro-x13dem.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 2ee9c043218b..3b89006fa008 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -1623,6 +1623,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ > aspeed-bmc-quanta-q71l.dtb \ > aspeed-bmc-quanta-s6q.dtb \ > aspeed-bmc-supermicro-x11spi.dtb \ > + aspeed-bmc-supermicro-x13dem.dtb \ > aspeed-bmc-inventec-transformers.dtb \ > aspeed-bmc-tyan-s7106.dtb \ > aspeed-bmc-tyan-s8036.dtb \ > diff --git a/arch/arm/boot/dts/aspeed-bmc-supermicro-x13dem.dts > b/arch/arm/boot/dts/aspeed-bmc-supermicro-x13dem.dts > new file mode 100644 > index 000000000000..b94783a52999 > --- /dev/null > +++ b/arch/arm/boot/dts/aspeed-bmc-supermicro-x13dem.dts > @@ -0,0 +1,476 @@ > +/dts-v1/; > + > +#include "aspeed-g6.dtsi" > +#include <dt-bindings/gpio/aspeed-gpio.h> > +#include <dt-bindings/i2c/i2c.h> > + > +/ { > + model = "AST2600 BMC"; > + compatible = "aspeed,ast2600"; > + > + chosen { > + stdout-path = &uart5; > + bootargs = "console=ttyS4,115200 earlyprintk"; > + }; > + > + memory@80000000 { > + device_type = "memory"; > + reg = <0x80000000 0x40000000>; > + }; > + > + reserved-memory { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + gfx_memory: framebuffer { > + size = <0x01000000>; > + alignment = <0x01000000>; > + compatible = "shared-dma-pool"; > + reusable; > + }; > + > + video_engine_memory: jpegbuffer { > + size = <0x02000000>; /* 32M */ > + alignment = <0x01000000>; > + compatible = "shared-dma-pool"; > + reusable; > + }; > + > + ssp_memory: ssp_memory { > + size = <0x00200000>; > + alignment = <0x00100000>; > + compatible = "shared-dma-pool"; > + no-map; > + }; How is this reserved memory used? > + > + }; > + > + leds { > + compatible = "gpio-leds"; > + powerfail { > + default-state = "off"; > + gpios = <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_LOW>; > + }; > + }; > + > + iio-hwmon { > + compatible = "iio-hwmon"; > + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, > + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, > + <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>, > + <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>; > + }; > + > +#if 0 > + aliases { > + i2c18 = &imux18; > + i2c19 = &imux19; > + i2c20 = &imux20; > + i2c21 = &imux21; > + i2c22 = &imux22; > + mmc0 = &emmc; > + }; > +#else > + aliases { > + mmc0 = &emmc; > + }; > +#endif Please remove the ifdefery. > + > +}; > + > +&emmc_controller { > + status = "okay"; > + timing-phase = <0x700FF>; This is not a valid property. Instead you need to use the clk-phase* properties that upstream provides: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/mmc/mmc-controller.yaml?h=v6.2-rc5#n348 These require knowing how much phase correction you need for a given bus speed. > +}; > + > +&emmc { > + status = "okay"; > + > + non-removable; > + max-frequency = <100000000>; > + sdhci-drive-type = /bits/ 8 <3>; > +#if 1 > + bus-width = <4>; > +#else > + bus-width = <8>; > + pinctrl-0 = <&pinctrl_emmc_default > + &pinctrl_emmcdat4_default > + &pinctrl_emmcdat5_default > + &pinctrl_emmcdat6_default > + &pinctrl_emmcdat7_default>; > +#endif Please remove the ifdefery > +}; > + > +//&jtag1 { > +// status = "okay"; > +//}; Remove commented nodes. > + > +&fmc { > + status = "okay"; > + flash@0 { > + status = "okay"; > + label = "bmc"; > + spi-max-frequency = <25000000>; > + spi-tx-bus-width = <1>; > + m25p,fast-read; > + partitions { > + compatible = "fixed-partitions"; > + #address-cells = <1>; > + #size-cells = <1>; > + > + u-boot@0 { > + reg = <0x0 0x100000>; > + label = "u-boot"; > + }; > + u-boot-env@3f0000 { > + reg = <0x3f0000 0x10000>; > + label = "u-boot-env"; > + }; > + u-boot-env-redund@7f0000 { > + reg = <0x7f0000 0x10000>; > + label = "u-boot-env-redund"; > + }; > + }; > + }; > +}; Do you actually have both SPI-NOR and eMMC storage for the BMC? > + > +&spi1 { > + status = "okay"; > + flash@0 { > + status = "okay"; > + label = "spi1:0"; > + spi-max-frequency = <25000000>; > + spi-bus-width = <1>; > + partitions { > + compatible = "fixed-partitions"; > + #address-cells = <1>; > + #size-cells = <1>; > + all-bios@0 { > + label = "all_part_bios"; > + reg = <0x000000000 0x02000000>; > + }; > + }; > + }; > + > +}; > + > +&spi2 { > + status = "disabled"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_spi2_default &pinctrl_spi2cs1_default > &pinctrl_spi2cs2_default > + &pinctrl_qspi2_default>; > + > + flash@0 { > + status = "okay"; > + label = "spi2:0"; > + spi-max-frequency = <100000000>; > + spi-bus-width = <2>; > + m25p,fast-read; > + }; > +}; > + > +//&peci0 { > +// status = "okay"; > +//}; Delete commented nodes > + > +&syscon { > + uart-clock-high-speed; This isn't a valid property. Please run your devicetree through `make dtbs_check`. > + status = "okay"; > +}; > + > +&adc0 { > + status = "okay"; You must also add the pinctrl properties here to ensure your ADC lines aren't accidentally muxed for other purposes. > +}; > + > +&adc1 { > + status = "okay"; Again here. > +}; > + > +&gpio0 { > + status = "okay"; > + gpio-line-names = > + /*A0-A7*/ "","","","","","","","", > + /*B0-B7*/ "","","","","","","","", > + /*C0-C7*/ "","","","","","","","", > + /*D0-D7*/ "","","","","","","","", > + /*E0-E7*/ "","","","","","","","", > + /*F0-F7*/ "","","","","","","","", > + /*G0-G7*/ "","","","","","","","", > + /*H0-H7*/ "","NMI_N","PWRBTN_N","RST_N","","","","", > + /*I0-I7*/ "","","","","","","","", > + /*J0-J7*/ "","","","","","","","", > + /*K0-K7*/ "","","","","","","","", > + /*L0-L7*/ "","","","","","","","", > + /*M0-M7*/ "","","","","","","","", > + /*N0-N7*/ "","","","","","","","", > + /*O0-O7*/ "","","","","","","","", > + /*P0-P7*/ "","","","","","","","", > + /*Q0-Q7*/ "","","","","","","","", > + /*R0-R7*/ "","","","","","","","", > + /*S0-S7*/ "","","","","PWROK_IN","","","", > + /*T0-T7*/ "","","","","","","","", > + /*U0-U7*/ "","","","","","","","", > + /*V0-V7*/ "","","","","","","","", > + /*W0-W7*/ "","","","","","","","", > + /*X0-X7*/ "","BIOS_CMP_IN","","","","","","", > + /*Y0-Y7*/ "","","","","","","","", > + /*Z0-Z7*/ "","","PWRBTN_IN","","","","",""; > +}; > + > +&gpio1 { > + status = "disabled"; > +}; > + > +&sgpiom0 { > + status = "disabled"; > + gpio-line-names = > + /* SGPIO output lines */ > + /*OA0-OA7*/ "","","","","","","","", > + /*OB0-OB7*/ "","","","","","","","", > + /*OC0-OC7*/ "","","","","","","","", > + /*OD0-OD7*/ "","","","","","","","", > + /*OE0-OE7*/ "","","","","","","","", > + /*OF0-OF7*/ "","","","","","","","", > + /*OG0-OG7*/ "","","","","","","","", > + /*OH0-OH7*/ "","","","","","","","", > + /*OI0-OI7*/ "","","","","","","","", > + /*OJ0-OJ7*/ "","","","","","","","", > + /*DUMMY*/ "","","","","","","","", > + /*DUMMY*/ "","","","","","","","", > + > + /* SGPIO input lines */ > + /*IA0-IA7*/ "","","","","","","","", > + /*IB0-IB7*/ "","","","","","","","", > + /*IC0-IC7*/ "","","","","","","","", > + /*ID0-ID7*/ "","","","","","","","", > + /*IE0-IE7*/ "","","","","","","","", > + /*IF0-IF7*/ "","","","","","","","", > + /*IG0-IG7*/ "","","","","","","","", > + /*IH0-IH7*/ "","","","","","","","", > + /*II0-II7*/ "","","","","","","","", > + /*IJ0-IJ7*/ "","","","","","","",""; > +}; > + > +&kcs3 { > + aspeed,lpc-io-reg = <0xCA2>; > + status = "okay"; > +}; > + > +&kcs4 { > + aspeed,lpc-io-reg = <0xCA4>; > + status = "okay"; > +}; > + > +//&lpc_sio { > +// status = "okay"; > +//}; Delete commented nodes. I don't think this node is even legitimate. Does this devicetree compile? > + > +&lpc_snoop { > + snoop-ports = <0x80>; > + status = "okay"; > +}; > + > +//&mbox { > +// status = "okay"; > +//}; Delete commented node. > + > +&uart1 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_txd1_default > + &pinctrl_rxd1_default > + &pinctrl_nrts1_default > + &pinctrl_ndtr1_default > + &pinctrl_ndsr1_default > + &pinctrl_ncts1_default > + &pinctrl_ndcd1_default > + &pinctrl_nri1_default>; > +}; > + > +&uart2 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_txd2_default > + &pinctrl_rxd2_default > + &pinctrl_nrts2_default > + &pinctrl_ndtr2_default > + &pinctrl_ndsr2_default > + &pinctrl_ncts2_default > + &pinctrl_ndcd2_default > + &pinctrl_nri2_default>; > +}; > + > +&uart3 { > + status = "okay"; > +}; > + > +&uart4 { > + status = "okay"; > +}; > + > +&uart5 { > + status = "okay"; > +}; > + > +&uart_routing { > + status = "okay"; > +}; > + > +&mdio0 { > + status = "okay"; > + > + ethphy0: ethernet-phy@0 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0>; > + }; > +}; > + > +&mac0 { > + status = "okay"; > + > + phy-mode = "rgmii"; > + phy-handle = <ðphy0>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rgmii1_default>; > +}; > + > +&mdio1 { > + status = "disabled"; > + > + ethphy1: ethernet-phy@0 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0>; > + }; > +}; > + > +&mac1 { > + status = "disabled"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rgmii2_default>; > + phy-mode = "rgmii"; > + phy-handle = <ðphy1>; > +}; > + > +&mdio2 { > + status = "disabled"; > + > + ethphy2: ethernet-phy@0 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0>; > + }; > +}; > + > +&mac2 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_rmii3_default>; > + use-ncsi; > +}; > + > +&mdio3 { > + status = "disabled"; > + > + ethphy3: ethernet-phy@0 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <0>; > + }; > +}; > + > +&mac3 { > + status = "disabled"; > + pinctrl-names = "default"; > + phy-handle = <ðphy3>; > + phy-mode = "rgmii"; > + > +}; > + > +&i2c0 { > + status = "okay"; > +}; > + > +&i2c1 { > + status = "disabled"; > +}; > + > +&i2c2 { > + multi-master; > + status = "okay"; > +#if 0 > + i2c-switch@71 { > + compatible = "nxp,pca9548"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x71>; > + i2c-mux-idle-disconnect; > + > + imux18: i2c@2 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <2>; > + }; > + > + imux19: i2c@3 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <3>; > + }; > + > + imux20: i2c@4 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <4>; > + }; > + > + imux21: i2c@5 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <5>; > + }; > + > + imux22: i2c@6 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <6>; > + }; > + }; > +#endif Delete the ifdefery The rest looks okay. Cheers, Andrew
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 2ee9c043218b..3b89006fa008 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1623,6 +1623,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-quanta-q71l.dtb \ aspeed-bmc-quanta-s6q.dtb \ aspeed-bmc-supermicro-x11spi.dtb \ + aspeed-bmc-supermicro-x13dem.dtb \ aspeed-bmc-inventec-transformers.dtb \ aspeed-bmc-tyan-s7106.dtb \ aspeed-bmc-tyan-s8036.dtb \ diff --git a/arch/arm/boot/dts/aspeed-bmc-supermicro-x13dem.dts b/arch/arm/boot/dts/aspeed-bmc-supermicro-x13dem.dts new file mode 100644 index 000000000000..b94783a52999 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-supermicro-x13dem.dts @@ -0,0 +1,476 @@ +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> + +/ { + model = "AST2600 BMC"; + compatible = "aspeed,ast2600"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + ssp_memory: ssp_memory { + size = <0x00200000>; + alignment = <0x00100000>; + compatible = "shared-dma-pool"; + no-map; + }; + + }; + + leds { + compatible = "gpio-leds"; + powerfail { + default-state = "off"; + gpios = <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_LOW>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>, + <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>; + }; + +#if 0 + aliases { + i2c18 = &imux18; + i2c19 = &imux19; + i2c20 = &imux20; + i2c21 = &imux21; + i2c22 = &imux22; + mmc0 = &emmc; + }; +#else + aliases { + mmc0 = &emmc; + }; +#endif + +}; + +&emmc_controller { + status = "okay"; + timing-phase = <0x700FF>; +}; + +&emmc { + status = "okay"; + + non-removable; + max-frequency = <100000000>; + sdhci-drive-type = /bits/ 8 <3>; +#if 1 + bus-width = <4>; +#else + bus-width = <8>; + pinctrl-0 = <&pinctrl_emmc_default + &pinctrl_emmcdat4_default + &pinctrl_emmcdat5_default + &pinctrl_emmcdat6_default + &pinctrl_emmcdat7_default>; +#endif +}; + +//&jtag1 { +// status = "okay"; +//}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + label = "bmc"; + spi-max-frequency = <25000000>; + spi-tx-bus-width = <1>; + m25p,fast-read; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + u-boot@0 { + reg = <0x0 0x100000>; + label = "u-boot"; + }; + u-boot-env@3f0000 { + reg = <0x3f0000 0x10000>; + label = "u-boot-env"; + }; + u-boot-env-redund@7f0000 { + reg = <0x7f0000 0x10000>; + label = "u-boot-env-redund"; + }; + }; + }; +}; + +&spi1 { + status = "okay"; + flash@0 { + status = "okay"; + label = "spi1:0"; + spi-max-frequency = <25000000>; + spi-bus-width = <1>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + all-bios@0 { + label = "all_part_bios"; + reg = <0x000000000 0x02000000>; + }; + }; + }; + +}; + +&spi2 { + status = "disabled"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2_default &pinctrl_spi2cs1_default &pinctrl_spi2cs2_default + &pinctrl_qspi2_default>; + + flash@0 { + status = "okay"; + label = "spi2:0"; + spi-max-frequency = <100000000>; + spi-bus-width = <2>; + m25p,fast-read; + }; +}; + +//&peci0 { +// status = "okay"; +//}; + +&syscon { + uart-clock-high-speed; + status = "okay"; +}; + +&adc0 { + status = "okay"; +}; + +&adc1 { + status = "okay"; +}; + +&gpio0 { + status = "okay"; + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","NMI_N","PWRBTN_N","RST_N","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","PWROK_IN","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","BIOS_CMP_IN","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","PWRBTN_IN","","","","",""; +}; + +&gpio1 { + status = "disabled"; +}; + +&sgpiom0 { + status = "disabled"; + gpio-line-names = + /* SGPIO output lines */ + /*OA0-OA7*/ "","","","","","","","", + /*OB0-OB7*/ "","","","","","","","", + /*OC0-OC7*/ "","","","","","","","", + /*OD0-OD7*/ "","","","","","","","", + /*OE0-OE7*/ "","","","","","","","", + /*OF0-OF7*/ "","","","","","","","", + /*OG0-OG7*/ "","","","","","","","", + /*OH0-OH7*/ "","","","","","","","", + /*OI0-OI7*/ "","","","","","","","", + /*OJ0-OJ7*/ "","","","","","","","", + /*DUMMY*/ "","","","","","","","", + /*DUMMY*/ "","","","","","","","", + + /* SGPIO input lines */ + /*IA0-IA7*/ "","","","","","","","", + /*IB0-IB7*/ "","","","","","","","", + /*IC0-IC7*/ "","","","","","","","", + /*ID0-ID7*/ "","","","","","","","", + /*IE0-IE7*/ "","","","","","","","", + /*IF0-IF7*/ "","","","","","","","", + /*IG0-IG7*/ "","","","","","","","", + /*IH0-IH7*/ "","","","","","","","", + /*II0-II7*/ "","","","","","","","", + /*IJ0-IJ7*/ "","","","","","","",""; +}; + +&kcs3 { + aspeed,lpc-io-reg = <0xCA2>; + status = "okay"; +}; + +&kcs4 { + aspeed,lpc-io-reg = <0xCA4>; + status = "okay"; +}; + +//&lpc_sio { +// status = "okay"; +//}; + +&lpc_snoop { + snoop-ports = <0x80>; + status = "okay"; +}; + +//&mbox { +// status = "okay"; +//}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default + &pinctrl_rxd2_default + &pinctrl_nrts2_default + &pinctrl_ndtr2_default + &pinctrl_ndsr2_default + &pinctrl_ncts2_default + &pinctrl_ndcd2_default + &pinctrl_nri2_default>; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&uart_routing { + status = "okay"; +}; + +&mdio0 { + status = "okay"; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&mac0 { + status = "okay"; + + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default>; +}; + +&mdio1 { + status = "disabled"; + + ethphy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&mac1 { + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default>; + phy-mode = "rgmii"; + phy-handle = <ðphy1>; +}; + +&mdio2 { + status = "disabled"; + + ethphy2: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + use-ncsi; +}; + +&mdio3 { + status = "disabled"; + + ethphy3: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&mac3 { + status = "disabled"; + pinctrl-names = "default"; + phy-handle = <ðphy3>; + phy-mode = "rgmii"; + +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "disabled"; +}; + +&i2c2 { + multi-master; + status = "okay"; +#if 0 + i2c-switch@71 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + i2c-mux-idle-disconnect; + + imux18: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + imux19: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + imux20: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + imux21: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + imux22: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + }; +#endif +}; + +&i2c3 { + //TODO, i2c switch + status = "okay"; +}; + +&i2c4 { + status = "okay"; + bus-frequency = <400000>; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + //TODO, i2c switch + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&vhub { + status = "okay"; +}; + +&rtc { + status = "okay"; +};
Signed-off-by: Ryan Sie <ryans@supermicro.com.tw> --- arch/arm/boot/dts/Makefile | 1 + .../boot/dts/aspeed-bmc-supermicro-x13dem.dts | 476 ++++++++++++++++++ 2 files changed, 477 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-supermicro-x13dem.dts