@@ -174,6 +174,13 @@ config SENSORS_LM25066
This driver can also be built as a module. If so, the module will
be called lm25066.
+config SENSORS_LM25066_REGULATOR
+ bool "Regulator support for LM25066 and compatibles"
+ depends on SENSORS_LM25066 && REGULATOR
+ help
+ If you say yes here you get regulator support for National
+ Semiconductor LM25066, LM5064, and LM5066.
+
config SENSORS_LTC2978
tristate "Linear Technologies LTC2978 and compatibles"
help
@@ -435,6 +435,12 @@ static int lm25066_write_word_data(struct i2c_client *client, int page, int reg,
return ret;
}
+#if IS_ENABLED(CONFIG_SENSORS_LM25066_REGULATOR)
+static const struct regulator_desc lm25066_reg_desc[] = {
+ PMBUS_REGULATOR("vout", 0),
+};
+#endif
+
static const struct i2c_device_id lm25066_id[] = {
{"lm25056", lm25056},
{"lm25066", lm25066},
@@ -545,6 +551,14 @@ static int lm25066_probe(struct i2c_client *client)
info->m[PSC_CURRENT_IN] = info->m[PSC_CURRENT_IN] * shunt / 1000;
info->m[PSC_POWER] = info->m[PSC_POWER] * shunt / 1000;
+#if IS_ENABLED(CONFIG_SENSORS_LM25066_REGULATOR)
+ /* LM25056 doesn't support OPERATION */
+ if (data->id != lm25056) {
+ info->num_regulators = ARRAY_SIZE(lm25066_reg_desc);
+ info->reg_desc = lm25066_reg_desc;
+ }
+#endif
+
return pmbus_do_probe(client, info);
}
While these chips aren't strictly advertised as voltage regulators per se, they (aside from the lm25056) support the PMBus OPERATION command to enable and disable their outputs and have status bits for reporting various warnings and faults, and can hence usefully support all the pmbus_regulator_ops operations. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> --- drivers/hwmon/pmbus/Kconfig | 7 +++++++ drivers/hwmon/pmbus/lm25066.c | 14 ++++++++++++++ 2 files changed, 21 insertions(+)