| Message ID | 20211112202931.2379145-1-anoo@linux.ibm.com |
|---|---|
| State | New |
| Headers | show |
| Series | ARM: configs: aspeed: Add support for USB flash drives | expand |
On Fri, Nov 12, 2021 at 12:29:31PM PST, Adriana Kobylak wrote: >From: Adriana Kobylak <anoo@us.ibm.com> > >Add support to detect USB flash drives and create the /dev/sd* devices. >Also add support for vfat to support USB drives formatted as FAT32. >This support will be used to enable firmware updates via USB flash >drives where the firmware image is stored in the USB drive and it's >plugged into the BMC USB port. > Hmm, how common is it for BMCs to have a USB port? Perhaps it's more so than I realize, but at least in my (admittedly somewhat limited) experience I've yet to encounter one that does, so I'm wondering how appropriate these options are for the aspeed-g5 defconfig if they might just end up as a bunch of code that's never executed on most BMCs. Zev >Signed-off-by: Adriana Kobylak <anoo@us.ibm.com> >Tested-by: Adriana Kobylak <anoo@us.ibm.com> >--- > arch/arm/configs/aspeed_g5_defconfig | 9 +++++++-- > 1 file changed, 7 insertions(+), 2 deletions(-) > >diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig >index bee9422919aa..1b0d82c64ad4 100644 >--- a/arch/arm/configs/aspeed_g5_defconfig >+++ b/arch/arm/configs/aspeed_g5_defconfig >@@ -37,11 +37,9 @@ CONFIG_KEXEC=y > CONFIG_VFP=y > CONFIG_NEON=y > CONFIG_KERNEL_MODE_NEON=y >-CONFIG_FIRMWARE_MEMMAP=y > CONFIG_KPROBES=y > CONFIG_JUMP_LABEL=y > CONFIG_MODULES=y >-# CONFIG_BLK_DEV_BSG is not set > # CONFIG_BLK_DEBUG_FS is not set > # CONFIG_MQ_IOSCHED_DEADLINE is not set > # CONFIG_MQ_IOSCHED_KYBER is not set >@@ -98,6 +96,7 @@ CONFIG_NET_NCSI=y > CONFIG_DEVTMPFS=y > CONFIG_DEVTMPFS_MOUNT=y > # CONFIG_PREVENT_FIRMWARE_BUILD is not set >+CONFIG_FIRMWARE_MEMMAP=y > CONFIG_MTD=y > CONFIG_MTD_BLOCK=y > CONFIG_MTD_PARTITIONED_MASTER=y >@@ -111,6 +110,8 @@ CONFIG_BLK_DEV_LOOP=y > CONFIG_BLK_DEV_NBD=y > CONFIG_EEPROM_AT24=y > CONFIG_EEPROM_AT25=y >+CONFIG_SCSI=y >+CONFIG_BLK_DEV_SD=y > CONFIG_NETDEVICES=y > CONFIG_NETCONSOLE=y > # CONFIG_NET_VENDOR_ALACRITECH is not set >@@ -230,6 +231,7 @@ CONFIG_USB_DYNAMIC_MINORS=y > CONFIG_USB_EHCI_HCD=y > CONFIG_USB_EHCI_ROOT_HUB_TT=y > CONFIG_USB_EHCI_HCD_PLATFORM=y >+CONFIG_USB_STORAGE=y > CONFIG_USB_GADGET=y > CONFIG_USB_ASPEED_VHUB=y > CONFIG_USB_CONFIGFS=y >@@ -277,6 +279,7 @@ CONFIG_FSI_OCC=y > CONFIG_EXT4_FS=y > CONFIG_FANOTIFY=y > CONFIG_OVERLAY_FS=y >+CONFIG_VFAT_FS=y > CONFIG_TMPFS=y > CONFIG_JFFS2_FS=y > # CONFIG_JFFS2_FS_WRITEBUFFER is not set >@@ -292,6 +295,8 @@ CONFIG_PSTORE_PMSG=y > CONFIG_PSTORE_FTRACE=y > CONFIG_PSTORE_RAM=y > # CONFIG_NETWORK_FILESYSTEMS is not set >+CONFIG_NLS_CODEPAGE_437=y >+CONFIG_NLS_ISO8859_1=y > CONFIG_HARDENED_USERCOPY=y > CONFIG_FORTIFY_SOURCE=y > CONFIG_CRYPTO_HMAC=y >-- >2.25.1 >
On Sat, 13 Nov 2021 at 01:58, Zev Weiss <zweiss@equinix.com> wrote:
> Hmm, how common is it for BMCs to have a USB port?
If it helps, the evb-ast2500 has a couple of USB ports, and I've
actually been trying to enable USB (additionally with CONFIG_HIDRAW)
so that I can do a demo that uses fwupd to update the firmware on the
attached keyboard or mouse.
Richard
On Sat, 13 Nov 2021, at 10:59, Zev Weiss wrote: > On Fri, Nov 12, 2021 at 12:29:31PM PST, Adriana Kobylak wrote: >>From: Adriana Kobylak <anoo@us.ibm.com> >> >>Add support to detect USB flash drives and create the /dev/sd* devices. >>Also add support for vfat to support USB drives formatted as FAT32. >>This support will be used to enable firmware updates via USB flash >>drives where the firmware image is stored in the USB drive and it's >>plugged into the BMC USB port. >> > > Hmm, how common is it for BMCs to have a USB port? Perhaps it's more so > than I realize, but at least in my (admittedly somewhat limited) > experience I've yet to encounter one that does, so I'm wondering how > appropriate these options are for the aspeed-g5 defconfig if they might > just end up as a bunch of code that's never executed on most BMCs. The intent with the Aspeed defconfigs was to enable options that provide a broad coverage of features used by e.g. upstream OpenBMC systems. This aids kernel maintenance for OpenBMC. The platform configuration in OpenBMC should provide a kernel config that only enables options relevant to that specific platform. With this in mind I think it's fine that USB support is enabled in the defconfigs. Andrew
diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig index bee9422919aa..1b0d82c64ad4 100644 --- a/arch/arm/configs/aspeed_g5_defconfig +++ b/arch/arm/configs/aspeed_g5_defconfig @@ -37,11 +37,9 @@ CONFIG_KEXEC=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_KERNEL_MODE_NEON=y -CONFIG_FIRMWARE_MEMMAP=y CONFIG_KPROBES=y CONFIG_JUMP_LABEL=y CONFIG_MODULES=y -# CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEBUG_FS is not set # CONFIG_MQ_IOSCHED_DEADLINE is not set # CONFIG_MQ_IOSCHED_KYBER is not set @@ -98,6 +96,7 @@ CONFIG_NET_NCSI=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FIRMWARE_MEMMAP=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_PARTITIONED_MASTER=y @@ -111,6 +110,8 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT25=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y CONFIG_NETDEVICES=y CONFIG_NETCONSOLE=y # CONFIG_NET_VENDOR_ALACRITECH is not set @@ -230,6 +231,7 @@ CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_ASPEED_VHUB=y CONFIG_USB_CONFIGFS=y @@ -277,6 +279,7 @@ CONFIG_FSI_OCC=y CONFIG_EXT4_FS=y CONFIG_FANOTIFY=y CONFIG_OVERLAY_FS=y +CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y # CONFIG_JFFS2_FS_WRITEBUFFER is not set @@ -292,6 +295,8 @@ CONFIG_PSTORE_PMSG=y CONFIG_PSTORE_FTRACE=y CONFIG_PSTORE_RAM=y # CONFIG_NETWORK_FILESYSTEMS is not set +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y CONFIG_HARDENED_USERCOPY=y CONFIG_FORTIFY_SOURCE=y CONFIG_CRYPTO_HMAC=y