| Message ID | 20210412034712.16778-4-zev@bewilderbeest.net |
|---|---|
| State | New |
| Headers | show |
| Series | serial: 8250_aspeed_vuart: generalized DT properties | expand |
On Mon, 12 Apr 2021, at 13:17, Zev Weiss wrote: > These allow describing all the Aspeed VUART attributes currently > available via sysfs. aspeed,lpc-interrupts provides a replacement for > the deprecated aspeed,sirq-polarity-sense property. > > Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
On Mon, Apr 12, 2021 at 7:05 AM Zev Weiss <zev@bewilderbeest.net> wrote: > > These allow describing all the Aspeed VUART attributes currently > available via sysfs. aspeed,lpc-interrupts provides a replacement for > the deprecated aspeed,sirq-polarity-sense property. One nit-pick below. In any case it's fine. > Signed-off-by: Zev Weiss <zev@bewilderbeest.net> > --- > drivers/tty/serial/8250/8250_aspeed_vuart.c | 51 ++++++++++++++++++++- > 1 file changed, 49 insertions(+), 2 deletions(-) > > diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c > index 8433f8dbb186..3c239d98747f 100644 > --- a/drivers/tty/serial/8250/8250_aspeed_vuart.c > +++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c > @@ -28,6 +28,10 @@ > #define ASPEED_VUART_ADDRL 0x28 > #define ASPEED_VUART_ADDRH 0x2c > > +#define ASPEED_VUART_DEFAULT_LPC_ADDR 0x3f8 > +#define ASPEED_VUART_DEFAULT_SIRQ 4 > +#define ASPEED_VUART_DEFAULT_SIRQ_POLARITY IRQ_TYPE_LEVEL_LOW > + > struct aspeed_vuart { > struct device *dev; > void __iomem *regs; > @@ -386,6 +390,18 @@ static void aspeed_vuart_auto_configure_sirq_polarity( > aspeed_vuart_set_sirq_polarity(vuart, (value & reg_mask) == 0); > } > > +static int aspeed_vuart_map_irq_polarity(u32 dt) > +{ > + switch (dt) { > + case IRQ_TYPE_LEVEL_LOW: > + return 0; > + case IRQ_TYPE_LEVEL_HIGH: > + return 1; > + default: > + return -EINVAL; > + } > +} > + > static int aspeed_vuart_probe(struct platform_device *pdev) > { > struct of_phandle_args sirq_polarity_sense_args; > @@ -393,8 +409,8 @@ static int aspeed_vuart_probe(struct platform_device *pdev) > struct aspeed_vuart *vuart; > struct device_node *np; > struct resource *res; > - u32 clk, prop; > - int rc; > + u32 clk, prop, sirq[2]; > + int rc, sirq_polarity; > > np = pdev->dev.of_node; > > @@ -501,6 +517,37 @@ static int aspeed_vuart_probe(struct platform_device *pdev) > of_node_put(sirq_polarity_sense_args.np); > } > > + rc = of_property_read_u32(np, "aspeed,lpc-io-reg", &prop); > + if (rc < 0) > + prop = ASPEED_VUART_DEFAULT_LPC_ADDR; > + > + rc = aspeed_vuart_set_lpc_address(vuart, prop); > + if (rc < 0) { > + dev_err(&pdev->dev, "invalid value in aspeed,lpc-io-reg property\n"); > + goto err_clk_disable; > + } > + > + rc = of_property_read_u32_array(np, "aspeed,lpc-interrupts", sirq, 2); > + if (rc < 0) { > + sirq[0] = ASPEED_VUART_DEFAULT_SIRQ; > + sirq[1] = ASPEED_VUART_DEFAULT_SIRQ_POLARITY; > + } > + > + rc = aspeed_vuart_set_sirq(vuart, sirq[0]); > + if (rc < 0) { > + dev_err(&pdev->dev, "invalid sirq number in aspeed,lpc-interrupts property\n"); > + goto err_clk_disable; > + } > + > + sirq_polarity = aspeed_vuart_map_irq_polarity(sirq[1]); > + if (sirq_polarity < 0) { > + dev_err(&pdev->dev, "invalid sirq polarity in aspeed,lpc-interrupts property\n"); > + rc = sirq_polarity; > + goto err_clk_disable; > + } Why not to use the same pattern as above, i.e. rc = aspeed_vuart_map_irq_polarity(sirq[1]); if (rc < 0) { dev_err(&pdev->dev, "invalid sirq polarity in aspeed,lpc-interrupts property\n"); goto err_clk_disable; } sirq_polarity = rc; ? > + aspeed_vuart_set_sirq_polarity(vuart, sirq_polarity); > + > aspeed_vuart_set_enabled(vuart, true); > aspeed_vuart_set_host_tx_discard(vuart, true); > platform_set_drvdata(pdev, vuart);
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c index 8433f8dbb186..3c239d98747f 100644 --- a/drivers/tty/serial/8250/8250_aspeed_vuart.c +++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c @@ -28,6 +28,10 @@ #define ASPEED_VUART_ADDRL 0x28 #define ASPEED_VUART_ADDRH 0x2c +#define ASPEED_VUART_DEFAULT_LPC_ADDR 0x3f8 +#define ASPEED_VUART_DEFAULT_SIRQ 4 +#define ASPEED_VUART_DEFAULT_SIRQ_POLARITY IRQ_TYPE_LEVEL_LOW + struct aspeed_vuart { struct device *dev; void __iomem *regs; @@ -386,6 +390,18 @@ static void aspeed_vuart_auto_configure_sirq_polarity( aspeed_vuart_set_sirq_polarity(vuart, (value & reg_mask) == 0); } +static int aspeed_vuart_map_irq_polarity(u32 dt) +{ + switch (dt) { + case IRQ_TYPE_LEVEL_LOW: + return 0; + case IRQ_TYPE_LEVEL_HIGH: + return 1; + default: + return -EINVAL; + } +} + static int aspeed_vuart_probe(struct platform_device *pdev) { struct of_phandle_args sirq_polarity_sense_args; @@ -393,8 +409,8 @@ static int aspeed_vuart_probe(struct platform_device *pdev) struct aspeed_vuart *vuart; struct device_node *np; struct resource *res; - u32 clk, prop; - int rc; + u32 clk, prop, sirq[2]; + int rc, sirq_polarity; np = pdev->dev.of_node; @@ -501,6 +517,37 @@ static int aspeed_vuart_probe(struct platform_device *pdev) of_node_put(sirq_polarity_sense_args.np); } + rc = of_property_read_u32(np, "aspeed,lpc-io-reg", &prop); + if (rc < 0) + prop = ASPEED_VUART_DEFAULT_LPC_ADDR; + + rc = aspeed_vuart_set_lpc_address(vuart, prop); + if (rc < 0) { + dev_err(&pdev->dev, "invalid value in aspeed,lpc-io-reg property\n"); + goto err_clk_disable; + } + + rc = of_property_read_u32_array(np, "aspeed,lpc-interrupts", sirq, 2); + if (rc < 0) { + sirq[0] = ASPEED_VUART_DEFAULT_SIRQ; + sirq[1] = ASPEED_VUART_DEFAULT_SIRQ_POLARITY; + } + + rc = aspeed_vuart_set_sirq(vuart, sirq[0]); + if (rc < 0) { + dev_err(&pdev->dev, "invalid sirq number in aspeed,lpc-interrupts property\n"); + goto err_clk_disable; + } + + sirq_polarity = aspeed_vuart_map_irq_polarity(sirq[1]); + if (sirq_polarity < 0) { + dev_err(&pdev->dev, "invalid sirq polarity in aspeed,lpc-interrupts property\n"); + rc = sirq_polarity; + goto err_clk_disable; + } + + aspeed_vuart_set_sirq_polarity(vuart, sirq_polarity); + aspeed_vuart_set_enabled(vuart, true); aspeed_vuart_set_host_tx_discard(vuart, true); platform_set_drvdata(pdev, vuart);
These allow describing all the Aspeed VUART attributes currently available via sysfs. aspeed,lpc-interrupts provides a replacement for the deprecated aspeed,sirq-polarity-sense property. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> --- drivers/tty/serial/8250/8250_aspeed_vuart.c | 51 ++++++++++++++++++++- 1 file changed, 49 insertions(+), 2 deletions(-)