diff mbox series

[17/19] dt-bindings: ipmi: Add optional SerIRQ property to ASPEED KCS devices

Message ID 20210219142523.3464540-18-andrew@aj.id.au
State New
Headers show
Series ipmi: Allow raw access to KCS devices | expand

Commit Message

Andrew Jeffery Feb. 19, 2021, 2:25 p.m. UTC
Allocating IO and IRQ resources to LPC devices is in-theory an operation
for the host, however ASPEED don't appear to expose this capability
outside the BMC (e.g. SuperIO). Instead, we are left with BMC-internal
registers for managing these resources, so introduce a devicetree
property for KCS devices to describe SerIRQ properties.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
 .../bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml      | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

Comments

Rob Herring March 5, 2021, 11:09 p.m. UTC | #1
On Sat, Feb 20, 2021 at 12:55:21AM +1030, Andrew Jeffery wrote:
> Allocating IO and IRQ resources to LPC devices is in-theory an operation
> for the host, however ASPEED don't appear to expose this capability
> outside the BMC (e.g. SuperIO). Instead, we are left with BMC-internal
> registers for managing these resources, so introduce a devicetree
> property for KCS devices to describe SerIRQ properties.
> 
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> ---
>  .../bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml      | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml
> index 1c1cc4265948..808475a2c2ca 100644
> --- a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml
> +++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml
> @@ -47,6 +47,18 @@ properties:
>        channels the status address is derived from the data address, but the
>        status address may be optionally provided.
>  
> +  aspeed,lpc-interrupts:
> +    $ref: "/schemas/types.yaml#/definitions/uint32-matrix"
> +    minItems: 1
> +    maxItems: 1
> +    description: |
> +      A 2-cell property expressing the LPC SerIRQ number and the interrupt
> +      level/sense encoding (specified in the standard fashion).

That would be uint32-array with 'maxItems: 2'.

> +
> +      Note that the generated interrupt is issued from the BMC to the host, and
> +      thus the target interrupt controller is not captured by the BMC's
> +      devicetree.
> +
>    kcs_chan:
>      deprecated: true
>      $ref: '/schemas/types.yaml#/definitions/uint32'
> @@ -84,9 +96,11 @@ allOf:
>  
>  examples:
>    - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
>      kcs3: kcs@24 {
>          compatible = "aspeed,ast2600-kcs-bmc";
>          reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
>          aspeed,lpc-io-reg = <0xca2>;
> +        aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
>          interrupts = <8>;
>      };
> -- 
> 2.27.0
>
Andrew Jeffery March 9, 2021, 2:44 a.m. UTC | #2
On Sat, 6 Mar 2021, at 09:39, Rob Herring wrote:
> On Sat, Feb 20, 2021 at 12:55:21AM +1030, Andrew Jeffery wrote:
> > Allocating IO and IRQ resources to LPC devices is in-theory an operation
> > for the host, however ASPEED don't appear to expose this capability
> > outside the BMC (e.g. SuperIO). Instead, we are left with BMC-internal
> > registers for managing these resources, so introduce a devicetree
> > property for KCS devices to describe SerIRQ properties.
> > 
> > Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> > ---
> >  .../bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml      | 14 ++++++++++++++
> >  1 file changed, 14 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml
> > index 1c1cc4265948..808475a2c2ca 100644
> > --- a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml
> > +++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml
> > @@ -47,6 +47,18 @@ properties:
> >        channels the status address is derived from the data address, but the
> >        status address may be optionally provided.
> >  
> > +  aspeed,lpc-interrupts:
> > +    $ref: "/schemas/types.yaml#/definitions/uint32-matrix"
> > +    minItems: 1
> > +    maxItems: 1
> > +    description: |
> > +      A 2-cell property expressing the LPC SerIRQ number and the interrupt
> > +      level/sense encoding (specified in the standard fashion).
> 
> That would be uint32-array with 'maxItems: 2'.
> 

Ah, thanks.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml
index 1c1cc4265948..808475a2c2ca 100644
--- a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml
+++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml
@@ -47,6 +47,18 @@  properties:
       channels the status address is derived from the data address, but the
       status address may be optionally provided.
 
+  aspeed,lpc-interrupts:
+    $ref: "/schemas/types.yaml#/definitions/uint32-matrix"
+    minItems: 1
+    maxItems: 1
+    description: |
+      A 2-cell property expressing the LPC SerIRQ number and the interrupt
+      level/sense encoding (specified in the standard fashion).
+
+      Note that the generated interrupt is issued from the BMC to the host, and
+      thus the target interrupt controller is not captured by the BMC's
+      devicetree.
+
   kcs_chan:
     deprecated: true
     $ref: '/schemas/types.yaml#/definitions/uint32'
@@ -84,9 +96,11 @@  allOf:
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/irq.h>
     kcs3: kcs@24 {
         compatible = "aspeed,ast2600-kcs-bmc";
         reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
         aspeed,lpc-io-reg = <0xca2>;
+        aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
         interrupts = <8>;
     };