diff mbox series

[v3,2/5] ARM: dts: Remove LPC BMC and Host partitions

Message ID 20201221055623.31463-3-chiawei_wang@aspeedtech.com
State New
Headers show
Series Remove LPC register partitioning | expand

Commit Message

Chia-Wei Wang Dec. 21, 2020, 5:56 a.m. UTC 
The LPC controller has no concept of the BMC and the Host partitions.

A concrete instance is that the HICRB[5:4] are for the I/O port address
configurtaion of KCS channel 1/2. However, the KCS driver cannot access
HICRB for channel 1/2 initialization via syscon regmap interface due to
the parition boundary. (i.e. offset 80h)

In addition, for the HW design backward compatibility, a newly added HW
control bit could be located at any reserved one over the LPC addressing
space. Thereby, this patch removes the lpc-bmc and lpc-host child node
and thus the LPC partitioning.

Note that this change requires the synchronization between device tree
change and the driver change. To prevent the misuse of old devicetrees
with new drivers, or vice versa, the v2 compatible strings are adopted
for the LPC device as listed:

	"aspeed,ast2400-lpc-v2"
	"aspeed,ast2500-lpc-v2"
	"aspeed,ast2600-lpc-v2"

Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
---
 arch/arm/boot/dts/aspeed-g4.dtsi |  74 +++++++----------
 arch/arm/boot/dts/aspeed-g5.dtsi | 135 ++++++++++++++-----------------
 arch/arm/boot/dts/aspeed-g6.dtsi | 135 ++++++++++++++-----------------
 3 files changed, 148 insertions(+), 196 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index b3dafbc8caca..ee22bc036440 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -343,58 +343,44 @@ 
 			};
 
 			lpc: lpc@1e789000 {
-				compatible = "aspeed,ast2400-lpc", "simple-mfd";
+				compatible = "aspeed,ast2400-lpc-v2", "simple-mfd", "syscon";
 				reg = <0x1e789000 0x1000>;
+				reg-io-width = <4>;
 
 				#address-cells = <1>;
 				#size-cells = <1>;
 				ranges = <0x0 0x1e789000 0x1000>;
 
-				lpc_bmc: lpc-bmc@0 {
-					compatible = "aspeed,ast2400-lpc-bmc";
-					reg = <0x0 0x80>;
+				lpc_ctrl: lpc-ctrl@80 {
+					compatible = "aspeed,ast2400-lpc-ctrl";
+					reg = <0x80 0x10>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
 				};
 
-				lpc_host: lpc-host@80 {
-					compatible = "aspeed,ast2400-lpc-host", "simple-mfd", "syscon";
-					reg = <0x80 0x1e0>;
-					reg-io-width = <4>;
-
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0x0 0x80 0x1e0>;
-
-					lpc_ctrl: lpc-ctrl@0 {
-						compatible = "aspeed,ast2400-lpc-ctrl";
-						reg = <0x0 0x10>;
-						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-						status = "disabled";
-					};
-
-					lpc_snoop: lpc-snoop@10 {
-						compatible = "aspeed,ast2400-lpc-snoop";
-						reg = <0x10 0x8>;
-						interrupts = <8>;
-						status = "disabled";
-					};
-
-					lhc: lhc@20 {
-						compatible = "aspeed,ast2400-lhc";
-						reg = <0x20 0x24 0x48 0x8>;
-					};
-
-					lpc_reset: reset-controller@18 {
-						compatible = "aspeed,ast2400-lpc-reset";
-						reg = <0x18 0x4>;
-						#reset-cells = <1>;
-					};
-
-					ibt: ibt@c0  {
-						compatible = "aspeed,ast2400-ibt-bmc";
-						reg = <0xc0 0x18>;
-						interrupts = <8>;
-						status = "disabled";
-					};
+				lpc_snoop: lpc-snoop@90 {
+					compatible = "aspeed,ast2400-lpc-snoop";
+					reg = <0x90 0x8>;
+					interrupts = <8>;
+					status = "disabled";
+				};
+
+				lhc: lhc@a0 {
+					compatible = "aspeed,ast2400-lhc";
+					reg = <0xa0 0x24 0xc8 0x8>;
+				};
+
+				lpc_reset: reset-controller@98 {
+					compatible = "aspeed,ast2400-lpc-reset";
+					reg = <0x98 0x4>;
+					#reset-cells = <1>;
+				};
+
+				ibt: ibt@140 {
+					compatible = "aspeed,ast2400-ibt-bmc";
+					reg = <0x140 0x18>;
+					interrupts = <8>;
+					status = "disabled";
 				};
 			};
 
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 5bc0de0f3365..10ca2100f69b 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -434,90 +434,73 @@ 
 			};
 
 			lpc: lpc@1e789000 {
-				compatible = "aspeed,ast2500-lpc", "simple-mfd";
+				compatible = "aspeed,ast2500-lpc-v2", "simple-mfd", "syscon";
 				reg = <0x1e789000 0x1000>;
+				reg-io-width = <4>;
 
 				#address-cells = <1>;
 				#size-cells = <1>;
 				ranges = <0x0 0x1e789000 0x1000>;
 
-				lpc_bmc: lpc-bmc@0 {
-					compatible = "aspeed,ast2500-lpc-bmc", "simple-mfd", "syscon";
-					reg = <0x0 0x80>;
-					reg-io-width = <4>;
-
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0x0 0x0 0x80>;
-
-					kcs1: kcs@24 {
-						compatible = "aspeed,ast2500-kcs-bmc-v2";
-						reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
-						interrupts = <8>;
-						status = "disabled";
-					};
-					kcs2: kcs@28 {
-						compatible = "aspeed,ast2500-kcs-bmc-v2";
-						reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
-						interrupts = <8>;
-						status = "disabled";
-					};
-					kcs3: kcs@2c {
-						compatible = "aspeed,ast2500-kcs-bmc-v2";
-						reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
-						interrupts = <8>;
-						status = "disabled";
-					};
+				kcs1: kcs@24 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
+					interrupts = <8>;
+					status = "disabled";
+				};
+
+				kcs2: kcs@28 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
+					interrupts = <8>;
+					status = "disabled";
+				};
+
+				kcs3: kcs@2c {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
+					interrupts = <8>;
+					status = "disabled";
+				};
+
+				kcs4: kcs@114 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>;
+					interrupts = <8>;
+					status = "disabled";
 				};
 
-				lpc_host: lpc-host@80 {
-					compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
-					reg = <0x80 0x1e0>;
-					reg-io-width = <4>;
-
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0x0 0x80 0x1e0>;
-
-					kcs4: kcs@94 {
-						compatible = "aspeed,ast2500-kcs-bmc-v2";
-						reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>;
-						interrupts = <8>;
-						status = "disabled";
-					};
-
-					lpc_ctrl: lpc-ctrl@0 {
-						compatible = "aspeed,ast2500-lpc-ctrl";
-						reg = <0x0 0x10>;
-						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-						status = "disabled";
-					};
-
-					lpc_snoop: lpc-snoop@10 {
-						compatible = "aspeed,ast2500-lpc-snoop";
-						reg = <0x10 0x8>;
-						interrupts = <8>;
-						status = "disabled";
-					};
-
-					lpc_reset: reset-controller@18 {
-						compatible = "aspeed,ast2500-lpc-reset";
-						reg = <0x18 0x4>;
-						#reset-cells = <1>;
-					};
-
-					lhc: lhc@20 {
-						compatible = "aspeed,ast2500-lhc";
-						reg = <0x20 0x24 0x48 0x8>;
-					};
-
-
-					ibt: ibt@c0 {
-						compatible = "aspeed,ast2500-ibt-bmc";
-						reg = <0xc0 0x18>;
-						interrupts = <8>;
-						status = "disabled";
-					};
+				lpc_ctrl: lpc-ctrl@80 {
+					compatible = "aspeed,ast2500-lpc-ctrl";
+					reg = <0x80 0x10>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_snoop: lpc-snoop@90 {
+					compatible = "aspeed,ast2500-lpc-snoop";
+					reg = <0x90 0x8>;
+					interrupts = <8>;
+					status = "disabled";
+				};
+
+				lpc_reset: reset-controller@98 {
+					compatible = "aspeed,ast2500-lpc-reset";
+					reg = <0x98 0x4>;
+					#reset-cells = <1>;
+				};
+
+				lhc: lhc@a0 {
+					compatible = "aspeed,ast2500-lhc";
+					reg = <0xa0 0x24 0xc8 0x8>;
+				};
+
+
+				ibt: ibt@140 {
+					compatible = "aspeed,ast2500-ibt-bmc";
+					reg = <0x140 0x18>;
+					interrupts = <8>;
+					status = "disabled";
 				};
 			};
 
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 810b0676ab03..d91f48c3db62 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -460,90 +460,73 @@ 
 			};
 
 			lpc: lpc@1e789000 {
-				compatible = "aspeed,ast2600-lpc", "simple-mfd";
+				compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
 				reg = <0x1e789000 0x1000>;
+				reg-io-width = <4>;
 
 				#address-cells = <1>;
 				#size-cells = <1>;
 				ranges = <0x0 0x1e789000 0x1000>;
 
-				lpc_bmc: lpc-bmc@0 {
-					compatible = "aspeed,ast2600-lpc-bmc", "simple-mfd", "syscon";
-					reg = <0x0 0x80>;
-					reg-io-width = <4>;
-
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0x0 0x0 0x80>;
-
-					kcs1: kcs@24 {
-						compatible = "aspeed,ast2500-kcs-bmc-v2";
-						reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
-						interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-						kcs_chan = <1>;
-						status = "disabled";
-					};
-					kcs2: kcs@28 {
-						compatible = "aspeed,ast2500-kcs-bmc-v2";
-						reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
-						interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
-						status = "disabled";
-					};
-					kcs3: kcs@2c {
-						compatible = "aspeed,ast2500-kcs-bmc-v2";
-						reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
-						interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-						status = "disabled";
-					};
+				kcs1: kcs@24 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
+					interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+					kcs_chan = <1>;
+					status = "disabled";
+				};
+
+				kcs2: kcs@28 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
+					interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				kcs3: kcs@2c {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
+					interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				kcs4: kcs@114 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>;
+					interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				lpc_ctrl: lpc-ctrl@80 {
+					compatible = "aspeed,ast2600-lpc-ctrl";
+					reg = <0x80 0x80>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_snoop: lpc-snoop@80 {
+					compatible = "aspeed,ast2600-lpc-snoop";
+					reg = <0x80 0x80>;
+					interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
 				};
 
-				lpc_host: lpc-host@80 {
-					compatible = "aspeed,ast2600-lpc-host", "simple-mfd", "syscon";
-					reg = <0x80 0x1e0>;
-					reg-io-width = <4>;
-
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0x0 0x80 0x1e0>;
-
-					kcs4: kcs@94 {
-						compatible = "aspeed,ast2500-kcs-bmc-v2";
-						reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>;
-						interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-						status = "disabled";
-					};
-
-					lpc_ctrl: lpc-ctrl@0 {
-						compatible = "aspeed,ast2600-lpc-ctrl";
-						reg = <0x0 0x80>;
-						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-						status = "disabled";
-					};
-
-					lpc_snoop: lpc-snoop@0 {
-						compatible = "aspeed,ast2600-lpc-snoop";
-						reg = <0x0 0x80>;
-						interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-						status = "disabled";
-					};
-
-					lhc: lhc@20 {
-						compatible = "aspeed,ast2600-lhc";
-						reg = <0x20 0x24 0x48 0x8>;
-					};
-
-					lpc_reset: reset-controller@18 {
-						compatible = "aspeed,ast2600-lpc-reset";
-						reg = <0x18 0x4>;
-						#reset-cells = <1>;
-					};
-
-					ibt: ibt@c0 {
-						compatible = "aspeed,ast2600-ibt-bmc";
-						reg = <0xc0 0x18>;
-						interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-						status = "disabled";
-					};
+				lhc: lhc@a0 {
+					compatible = "aspeed,ast2600-lhc";
+					reg = <0xa0 0x24 0xc8 0x8>;
+				};
+
+				lpc_reset: reset-controller@98 {
+					compatible = "aspeed,ast2600-lpc-reset";
+					reg = <0x98 0x4>;
+					#reset-cells = <1>;
+				};
+
+				ibt: ibt@140 {
+					compatible = "aspeed,ast2600-ibt-bmc";
+					reg = <0x140 0x18>;
+					interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
 				};
 			};