| Message ID | 20201119175324.22472-3-rentao.bupt@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | hwmon: (max127) Add Maxim MAX127 hardware monitoring | expand |
On Thu, Nov 19, 2020 at 09:53:24AM -0800, rentao.bupt@gmail.com wrote: > From: Tao Ren <rentao.bupt@gmail.com> > > Add documentation for the max127 hardware monitoring driver. > > Signed-off-by: Tao Ren <rentao.bupt@gmail.com> For my reference: Reviewed-by: Guenter Roeck <linux@roeck-us.net> Guenter > --- > Changes in v3: > - no code change. xdp maintainers were removed from to/cc list. > Changes in v2: > - add more description for min/max sysfs nodes. > - convert values from volt to millivolt in the document. > > Documentation/hwmon/index.rst | 1 + > Documentation/hwmon/max127.rst | 45 ++++++++++++++++++++++++++++++++++ > 2 files changed, 46 insertions(+) > create mode 100644 Documentation/hwmon/max127.rst > > diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst > index 408760d13813..0a07b6000c20 100644 > --- a/Documentation/hwmon/index.rst > +++ b/Documentation/hwmon/index.rst > @@ -111,6 +111,7 @@ Hardware Monitoring Kernel Drivers > ltc4245 > ltc4260 > ltc4261 > + max127 > max16064 > max16065 > max1619 > diff --git a/Documentation/hwmon/max127.rst b/Documentation/hwmon/max127.rst > new file mode 100644 > index 000000000000..dc192dd9c37c > --- /dev/null > +++ b/Documentation/hwmon/max127.rst > @@ -0,0 +1,45 @@ > +.. SPDX-License-Identifier: GPL-2.0-or-later > + > +Kernel driver max127 > +==================== > + > +Author: > + > + * Tao Ren <rentao.bupt@gmail.com> > + > +Supported chips: > + > + * Maxim MAX127 > + > + Prefix: 'max127' > + > + Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX127-MAX128.pdf > + > +Description > +----------- > + > +The MAX127 is a multirange, 12-bit data acquisition system (DAS) providing > +8 analog input channels that are independently software programmable for > +a variety of ranges. The available ranges are {0,5V}, {0,10V}, {-5,5V} > +and {-10,10V}. > + > +The MAX127 features a 2-wire, I2C-compatible serial interface that allows > +communication among multiple devices using SDA and SCL lines. > + > +Sysfs interface > +--------------- > + > + ============== ============================================================== > + in[0-7]_input The input voltage (in mV) of the corresponding channel. > + RO > + > + in[0-7]_min The lower input limit (in mV) for the corresponding channel. > + ADC range and LSB will be updated when the limit is changed. > + For the MAX127, it will be adjusted to -10000, -5000, or 0. > + RW > + > + in[0-7]_max The higher input limit (in mV) for the corresponding channel. > + ADC range and LSB will be updated when the limit is changed. > + For the MAX127, it will be adjusted to 0, 5000, or 10000. > + RW > + ============== ==============================================================
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 408760d13813..0a07b6000c20 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -111,6 +111,7 @@ Hardware Monitoring Kernel Drivers ltc4245 ltc4260 ltc4261 + max127 max16064 max16065 max1619 diff --git a/Documentation/hwmon/max127.rst b/Documentation/hwmon/max127.rst new file mode 100644 index 000000000000..dc192dd9c37c --- /dev/null +++ b/Documentation/hwmon/max127.rst @@ -0,0 +1,45 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver max127 +==================== + +Author: + + * Tao Ren <rentao.bupt@gmail.com> + +Supported chips: + + * Maxim MAX127 + + Prefix: 'max127' + + Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX127-MAX128.pdf + +Description +----------- + +The MAX127 is a multirange, 12-bit data acquisition system (DAS) providing +8 analog input channels that are independently software programmable for +a variety of ranges. The available ranges are {0,5V}, {0,10V}, {-5,5V} +and {-10,10V}. + +The MAX127 features a 2-wire, I2C-compatible serial interface that allows +communication among multiple devices using SDA and SCL lines. + +Sysfs interface +--------------- + + ============== ============================================================== + in[0-7]_input The input voltage (in mV) of the corresponding channel. + RO + + in[0-7]_min The lower input limit (in mV) for the corresponding channel. + ADC range and LSB will be updated when the limit is changed. + For the MAX127, it will be adjusted to -10000, -5000, or 0. + RW + + in[0-7]_max The higher input limit (in mV) for the corresponding channel. + ADC range and LSB will be updated when the limit is changed. + For the MAX127, it will be adjusted to 0, 5000, or 10000. + RW + ============== ==============================================================