diff mbox series

[1/2] rainier: Add leds that are off 9551 on Operator Panel

Message ID 125895BF-8477-4107-9A80-47A5128D296C@linux.vnet.ibm.com
State New
Headers show
Series [1/2] rainier: Add leds that are off 9551 on Operator Panel | expand

Commit Message

vishwanatha subbanna July 27, 2020, 12:40 p.m. UTC
These are LEDs that are controlled by 9551

Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
---
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 82 ++++++++++++++++++++++++++++
1 file changed, 82 insertions(+)

Comments

Eddie James July 27, 2020, 9:19 p.m. UTC | #1
On 7/27/20 7:40 AM, vishwanatha subbanna wrote:
> These are LEDs that are controlled by 9551


Reviewed-by: Eddie James <eajames@linux.ibm.com>


>
> Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
> ---
> arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 82 ++++++++++++++++++++++++++++
> 1 file changed, 82 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> index 0b5c6cc..ecbce50 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> @@ -69,6 +69,38 @@
> 		};
> 	};
>
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		/* System ID LED that is at front on Op Panel */
> +		front-sys-id0 {
> +			retain-state-shutdown;
> +			default-state = "keep";
> +			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
> +		};
> +
> +		/* System Attention Indicator ID LED that is at front on Op Panel */
> +		front-check-log0 {
> +			retain-state-shutdown;
> +			default-state = "keep";
> +			gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
> +		};
> +
> +		/* Enclosure Fault LED that is at front on Op Panel */
> +		front-enc-fault1 {
> +			retain-state-shutdown;
> +			default-state = "keep";
> +			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
> +		};
> +
> +		/* System PowerOn LED that is at front on Op Panel */
> +		front-sys-pwron0 {
> +			retain-state-shutdown;
> +			default-state = "keep";
> +			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
> +		};
> +	};
> +
> };
>
> &gpio0 {
> @@ -514,6 +546,56 @@
> 		};
> 	};
>
> +	pca1: pca9551@60 {
> +		compatible = "nxp,pca9551";
> +		reg = <0x60>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		gpio@0 {
> +			reg = <0>;
> +			type = <PCA955X_TYPE_GPIO>;
> +		};
> +
> +		gpio@1 {
> +			reg = <1>;
> +			type = <PCA955X_TYPE_GPIO>;
> +		};
> +
> +		gpio@2 {
> +			reg = <2>;
> +			type = <PCA955X_TYPE_GPIO>;
> +		};
> +
> +		gpio@3 {
> +			reg = <3>;
> +			type = <PCA955X_TYPE_GPIO>;
> +		};
> +
> +		gpio@4 {
> +			reg = <4>;
> +			type = <PCA955X_TYPE_GPIO>;
> +		};
> +
> +		gpio@5 {
> +			reg = <5>;
> +			type = <PCA955X_TYPE_GPIO>;
> +		};
> +
> +		gpio@6 {
> +			reg = <6>;
> +			type = <PCA955X_TYPE_GPIO>;
> +		};
> +
> +		gpio@7 {
> +			reg = <7>;
> +			type = <PCA955X_TYPE_GPIO>;
> +		};
> +	};
> +
> 	dps: dps310@76 {
> 		compatible = "infineon,dps310";
> 		reg = <0x76>;
Joel Stanley July 27, 2020, 11:23 p.m. UTC | #2
On Mon, 27 Jul 2020 at 12:41, vishwanatha subbanna
<vishwa@linux.vnet.ibm.com> wrote:
>
>
> These are LEDs that are controlled by 9551
>
> Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
> ---
> arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 82 ++++++++++++++++++++++++++++
> 1 file changed, 82 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> index 0b5c6cc..ecbce50 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> @@ -69,6 +69,38 @@
>                 };
>         };
>
> +       leds {
> +               compatible = "gpio-leds";
> +
> +               /* System ID LED that is at front on Op Panel */
> +               front-sys-id0 {
> +                       retain-state-shutdown;
> +                       default-state = "keep";
> +                       gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
> +               };
> +
> +               /* System Attention Indicator ID LED that is at front on Op Panel */
> +               front-check-log0 {
> +                       retain-state-shutdown;
> +                       default-state = "keep";
> +                       gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
> +               };
> +
> +               /* Enclosure Fault LED that is at front on Op Panel */
> +               front-enc-fault1 {
> +                       retain-state-shutdown;
> +                       default-state = "keep";
> +                       gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
> +               };
> +
> +               /* System PowerOn LED that is at front on Op Panel */
> +               front-sys-pwron0 {
> +                       retain-state-shutdown;
> +                       default-state = "keep";
> +                       gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
> +               };
> +       };
> +
> };

This patch is malformed. It looks like you've pasted it into your
mailer, which makes it easy to break the patch. Instead I recommend
using git-send-email to send your patches as it avoids this issue.


>
> &gpio0 {
> @@ -514,6 +546,56 @@
>                 };
>         };
>
> +       pca1: pca9551@60 {
> +               compatible = "nxp,pca9551";
> +               reg = <0x60>;
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               gpio@0 {
> +                       reg = <0>;
> +                       type = <PCA955X_TYPE_GPIO>;
> +               };
> +
> +               gpio@1 {
> +                       reg = <1>;
> +                       type = <PCA955X_TYPE_GPIO>;
> +               };
> +
> +               gpio@2 {
> +                       reg = <2>;
> +                       type = <PCA955X_TYPE_GPIO>;
> +               };
> +
> +               gpio@3 {
> +                       reg = <3>;
> +                       type = <PCA955X_TYPE_GPIO>;
> +               };
> +
> +               gpio@4 {
> +                       reg = <4>;
> +                       type = <PCA955X_TYPE_GPIO>;
> +               };
> +
> +               gpio@5 {
> +                       reg = <5>;
> +                       type = <PCA955X_TYPE_GPIO>;
> +               };
> +
> +               gpio@6 {
> +                       reg = <6>;
> +                       type = <PCA955X_TYPE_GPIO>;
> +               };
> +
> +               gpio@7 {
> +                       reg = <7>;
> +                       type = <PCA955X_TYPE_GPIO>;
> +               };
> +       };
> +
>         dps: dps310@76 {
>                 compatible = "infineon,dps310";
>                 reg = <0x76>;
> --
> 1.8.3.1
>
>
>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index 0b5c6cc..ecbce50 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -69,6 +69,38 @@ 
		};
	};

+	leds {
+		compatible = "gpio-leds";
+
+		/* System ID LED that is at front on Op Panel */
+		front-sys-id0 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
+		};
+
+		/* System Attention Indicator ID LED that is at front on Op Panel */
+		front-check-log0 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure Fault LED that is at front on Op Panel */
+		front-enc-fault1 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		/* System PowerOn LED that is at front on Op Panel */
+		front-sys-pwron0 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
};

&gpio0 {
@@ -514,6 +546,56 @@ 
		};
	};

+	pca1: pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
	dps: dps310@76 {
		compatible = "infineon,dps310";
		reg = <0x76>;