Show patches with: none      |   7224 patches
« 1 2 ... 32 33 34 … 72 73 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
gpio: aspeed: Lock GPIO pin used as IRQ gpio: aspeed: Lock GPIO pin used as IRQ - - - - --- 2020-12-10 Troy Lee New
Adding chips TCA9554 and PCA9552, to expose the presence Adding chips TCA9554 and PCA9552, to expose the presence - - - - --- 2020-12-10 Alpana Kumari New
[4/4] hwmon: Support Aspeed AST2600 PWM/Fan tachometer hwmon: aspeed2600-pwm-tacho: Add driver support - - - - --- 2020-12-09 Troy Lee New
[3/4] hwmon: Add Aspeed AST2600 support hwmon: aspeed2600-pwm-tacho: Add driver support - - - - --- 2020-12-09 Troy Lee New
[2/4] ARM: dts: aspeed: Add Aspeed AST2600 PWM/Fan node in devicetree hwmon: aspeed2600-pwm-tacho: Add driver support - - - - --- 2020-12-09 Troy Lee New
[1/4] dt-bindings: hwmon: Add Aspeed AST2600 PWM/Fan hwmon: aspeed2600-pwm-tacho: Add driver support - - - - --- 2020-12-09 Troy Lee New
[2/2] media: aspeed: fix clock handling logic Fix kernel panic issues caused by AST2500 Video Engine - 1 2 - --- 2020-12-07 Jae Hyun Yoo New
[1/2] clk: ast2600: fix reset settings for eclk and vclk Fix kernel panic issues caused by AST2500 Video Engine - 1 1 - --- 2020-12-07 Jae Hyun Yoo New
[linux,hwmon-next,v4,3/3] dt-bindings: (hwmon/sbtsi_tmep) Add SB-TSI hwmon driver bindings SB-TSI hwmon driver v4 - - 1 - --- 2020-12-02 Kun Yi New
[linux,hwmon-next,v4,2/3] hwmon: (sbtsi) Add documentation SB-TSI hwmon driver v4 - - - - --- 2020-12-02 Kun Yi New
[linux,hwmon-next,v4,1/3] hwmon: (sbtsi) Add basic support for SB-TSI sensors SB-TSI hwmon driver v4 - - - - --- 2020-12-02 Kun Yi New
[v2,2/2] ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC ARM: dts: aspeed: Add Ampere Mt. Jade BMC device - - 1 - --- 2020-11-30 Quan Nguyen New
[v2,1/2] dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com ARM: dts: aspeed: Add Ampere Mt. Jade BMC device - - 3 - --- 2020-11-30 Quan Nguyen New
[2/2] ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC ARM: dts: aspeed: Add Ampere Mt. Jade BMC device - - - - --- 2020-11-27 Quan Nguyen New
[1/2] dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com ARM: dts: aspeed: Add Ampere Mt. Jade BMC device - - - - --- 2020-11-27 Quan Nguyen New
pinctrl: aspeed: Fix GPIO requests on pass-through banks pinctrl: aspeed: Fix GPIO requests on pass-through banks - 1 1 1 --- 2020-11-26 Andrew Jeffery New
[linux,dev-5.8] ARM: dts: aspeed: rainier: Add gpio-keys-polled for fans [linux,dev-5.8] ARM: dts: aspeed: rainier: Add gpio-keys-polled for fans - - 1 - --- 2020-11-25 Matthew Barth New
[linux,dev-5.8] ARM: dts: aspeed: rainier-4u: Update fan config [linux,dev-5.8] ARM: dts: aspeed: rainier-4u: Update fan config - - 1 - --- 2020-11-24 Matthew Barth New
[linux,dev-5.8] ARM: dts: aspeed: rainier: Set MAX31785 config [linux,dev-5.8] ARM: dts: aspeed: rainier: Set MAX31785 config - - 1 - --- 2020-11-24 Matthew Barth New
[v5,2/2] docs: hwmon: Document max127 driver hwmon: (max127) Add Maxim MAX127 hardware monitoring - - 1 - --- 2020-11-23 Tao Ren New
[v5,1/2] hwmon: (max127) Add Maxim MAX127 hardware monitoring driver hwmon: (max127) Add Maxim MAX127 hardware monitoring - - - - --- 2020-11-23 Tao Ren New
[v4,2/2] docs: hwmon: Document max127 driver hwmon: (max127) Add Maxim MAX127 hardware monitoring - - 1 - --- 2020-11-23 Tao Ren New
[v4,1/2] hwmon: (max127) Add Maxim MAX127 hardware monitoring driver hwmon: (max127) Add Maxim MAX127 hardware monitoring - - - - --- 2020-11-23 Tao Ren New
[v3,2/2] docs: hwmon: Document max127 driver hwmon: (max127) Add Maxim MAX127 hardware monitoring - - 1 - --- 2020-11-19 Tao Ren New
[v3,1/2] hwmon: (max127) Add Maxim MAX127 hardware monitoring driver hwmon: (max127) Add Maxim MAX127 hardware monitoring - - - - --- 2020-11-19 Tao Ren New
[v1] ARM: dts: add Nuvoton NPCM730 device tree [v1] ARM: dts: add Nuvoton NPCM730 device tree - - 1 - --- 2020-11-19 Tomer Maimon New
[v2,2/2] docs: hwmon: Document max127 driver hwmon: (max127) Add Maxim MAX127 hardware monitoring - - - - --- 2020-11-18 Tao Ren New
[v2,1/2] hwmon: (max127) Add Maxim MAX127 hardware monitoring driver hwmon: (max127) Add Maxim MAX127 hardware monitoring - - - - --- 2020-11-18 Tao Ren New
[linux,dev-5.8] soc: aspeed: Remove misc control interface driver [linux,dev-5.8] soc: aspeed: Remove misc control interface driver - - - - --- 2020-11-17 Joel Stanley New
[2/2] docs: hwmon: Document max127 driver hwmon: (max127) Add Maxim MAX127 hardware monitoring - - - - --- 2020-11-17 Tao Ren New
[1/2] hwmon: (max127) Add Maxim MAX127 hardware monitoring driver hwmon: (max127) Add Maxim MAX127 hardware monitoring - - - - --- 2020-11-17 Tao Ren New
[v5,linux,dev-5.8] Fii Kudo project device tree file [v5,linux,dev-5.8] Fii Kudo project device tree file - - 2 - --- 2020-11-16 Lancelot Kao New
QEMU - No 'PCI' bus found for device 'virtio-rng-pci' QEMU - No 'PCI' bus found for device 'virtio-rng-pci' - - - - --- 2020-11-16 Ambrozewicz, Adrian New
[v4,linux,dev-5.8] Fii Kudo project device tree file [v4,linux,dev-5.8] Fii Kudo project device tree file - - 1 - --- 2020-11-12 Lancelot Kao New
[v3,linux,dev-5.8] Fii Kudo project device tree file Add device tree for the Kudo BMC. Kudo is an A… [v3,linux,dev-5.8] Fii Kudo project device tree file Add device tree for the Kudo BMC. Kudo is an A… - - - - --- 2020-11-12 Lancelot Kao New
[4/4] ARM: dts: aspeed: Add Facebook Galaxy100 (AST2400) BMC ARM: dts: aspeed: Add Facebook Galaxy100 BMC - - - - --- 2020-11-11 Tao Ren New
[3/4] ARM: dts: aspeed: wedge100: Use common dtsi ARM: dts: aspeed: Add Facebook Galaxy100 BMC - - - - --- 2020-11-11 Tao Ren New
[2/4] ARM: dts: aspeed: wedge40: Use common dtsi ARM: dts: aspeed: Add Facebook Galaxy100 BMC - - - - --- 2020-11-11 Tao Ren New
[1/4] ARM: dts: aspeed: Common dtsi for Facebook AST2400 Network BMCs ARM: dts: aspeed: Add Facebook Galaxy100 BMC - - - - --- 2020-11-11 Tao Ren New
[linux,dev-5.8,3/3] ARM: dts: aspeed: amd-ethanolx: Add GPIO line names [linux,dev-5.8,1/3] ARM: dts: aspeed: amd-ethanolx: Enable KCS channel 3 - - - - --- 2020-11-11 Konstantin Aladyshev New
[linux,dev-5.8,2/3] ARM: dts: aspeed: amd-ethanolx: Enable devices for the iKVM functionality [linux,dev-5.8,1/3] ARM: dts: aspeed: amd-ethanolx: Enable KCS channel 3 - - 2 - --- 2020-11-11 Konstantin Aladyshev New
[linux,dev-5.8,1/3] ARM: dts: aspeed: amd-ethanolx: Enable KCS channel 3 [linux,dev-5.8,1/3] ARM: dts: aspeed: amd-ethanolx: Enable KCS channel 3 - - 2 - --- 2020-11-11 Konstantin Aladyshev New
[v2,linux,dev-5.8] Fii Kudo project device tree file [v2,linux,dev-5.8] Fii Kudo project device tree file - - - - --- 2020-11-10 Lancelot Kao New
[linux,dev-5.8] spi: fsi: Fix transfer returning without finalizing message [linux,dev-5.8] spi: fsi: Fix transfer returning without finalizing message - 1 - - --- 2020-11-10 Eddie James New
ARM: dts: aspeed: minipack: Fixup I2C tree ARM: dts: aspeed: minipack: Fixup I2C tree - - 1 - --- 2020-11-10 Tao Ren New
ARM: dts: aspeed: wedge400: Fix FMC flash0 layout ARM: dts: aspeed: wedge400: Fix FMC flash0 layout - - 1 - --- 2020-11-10 Tao Ren New
[u-boot,v2019.04-aspeed-openbmc,v3,3/3] configs: Add AST2600 SPL eMMC configuration Aspeed: Support eMMC boot - - - - --- 2020-11-05 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v3,2/3] arch: ARM: Aspeed: Add SPL eMMC partition boot support Aspeed: Support eMMC boot - - 1 - --- 2020-11-05 Eddie James New
[u-boot,v2019.04-aspeed-openbmc,v3,1/3] ARM: dts: Aspeed: Tacoma and Rainier: Add eMMC nodes and pa… Aspeed: Support eMMC boot - - 1 - --- 2020-11-05 Eddie James New
[linux,dev-5.8] Fii Kudo project device tree file [linux,dev-5.8] Fii Kudo project device tree file - - - - --- 2020-11-04 Lancelot Kao New
[linux,dev-5.8] ARM: dts: Aspeed: Rainier: Mark FSI SPI controllers as restricted [linux,dev-5.8] ARM: dts: Aspeed: Rainier: Mark FSI SPI controllers as restricted - - - - --- 2020-11-02 Eddie James New
[v3,3/3] dt-bindings: net: ftgmac100: describe phy-handle and MDIO add ast2400/2500 phy-handle support - - 1 - --- 2020-10-30 Ivan Mikhaylov New
[v3,2/3] net: ftgmac100: add handling of mdio/phy nodes for ast2400/2500 add ast2400/2500 phy-handle support - - 1 - --- 2020-10-30 Ivan Mikhaylov New
[v3,1/3] net: ftgmac100: move phy connect out from ftgmac100_setup_mdio add ast2400/2500 phy-handle support - - 1 - --- 2020-10-30 Ivan Mikhaylov New
[v2] pinctrl: aspeed: Fix GPI only function problem. [v2] pinctrl: aspeed: Fix GPI only function problem. - 1 1 - --- 2020-10-30 Billy Tsai New
[U-Boot,v2019.04-aspeed-openbmc,v2,3/3] configs: Add AST2600 SPL eMMC configuration Aspeed: Support eMMC boot - - - - --- 2020-10-29 Eddie James New
[U-Boot,v2019.04-aspeed-openbmc,v2,2/3] arch: ARM: Aspeed: Add SPL eMMC partition boot support Aspeed: Support eMMC boot - - 1 - --- 2020-10-29 Eddie James New
[U-Boot,v2019.04-aspeed-openbmc,v2,1/3] ARM: dts: Aspeed: Tacoma and Rainier: Add eMMC nodes and pa… Aspeed: Support eMMC boot - - 1 - --- 2020-10-29 Eddie James New
[linux,dev-5.8,v3] ARM: dts: Aspeed: Rainier: Add 4U device-tree [linux,dev-5.8,v3] ARM: dts: Aspeed: Rainier: Add 4U device-tree - - 1 - --- 2020-10-28 Eddie James New
[v2,2/2] net: ftgmac100: add handling of mdio/phy nodes for ast2400/2500 add ast2400/2500 phy-handle support - - - - --- 2020-10-27 Ivan Mikhaylov New
[v2,1/2] net: ftgmac100: move phy connect out from ftgmac100_setup_mdio add ast2400/2500 phy-handle support - - 1 - --- 2020-10-27 Ivan Mikhaylov New
pinctrl: aspeed: Fix GPI only function problem. pinctrl: aspeed: Fix GPI only function problem. - 1 - - --- 2020-10-27 Billy Tsai New
[linux,dev-5.8] ARM: dts: aspeed: amd-ethanolx: Enable KCS channel 3 [linux,dev-5.8] ARM: dts: aspeed: amd-ethanolx: Enable KCS channel 3 - - - - --- 2020-10-24 Konstantin Aladyshev New
ARM: dts: Fix label address for 64MiB OpenBMC flash layout ARM: dts: Fix label address for 64MiB OpenBMC flash layout 1 - 1 - --- 2020-10-22 George Liu New
peci: Set "Wake On PECI" mode when required peci: Set "Wake On PECI" mode when required - - - - --- 2020-10-21 Andrei Kartashev New
[4/4] ftgmac100: Restart MAC HW once fix ftgmac100 issues on aspeed soc 1 1 1 - --- 2020-10-19 Dylan Hung Not Applicable
[3/4] ftgmac100: Add a dummy read to ensure running sequence fix ftgmac100 issues on aspeed soc - 1 - - --- 2020-10-19 Dylan Hung Not Applicable
[2/4] ftgmac100: Fix missing-poll issue fix ftgmac100 issues on aspeed soc - 1 - - --- 2020-10-19 Dylan Hung Not Applicable
[1/4] ftgmac100: Fix race issue on TX descriptor[0] fix ftgmac100 issues on aspeed soc - 1 - - --- 2020-10-19 Dylan Hung Not Applicable
net: ftgmac100: Fix missing TX-poll issue net: ftgmac100: Fix missing TX-poll issue - - - - --- 2020-10-19 Dylan Hung Not Applicable
[v1] i2c: aspeed: add KUnit tests for clock parameters [v1] i2c: aspeed: add KUnit tests for clock parameters - - - - --- 2020-10-16 Brendan Higgins Not Applicable
[v1,2/2] net: ftgmac100: add handling of mdio/phy nodes for ast2400/2500 add ast2400/2500 phy-handle support - - - - --- 2020-10-15 Ivan Mikhaylov Not Applicable
[v1,1/2] net: ftgmac100: move phy connect out from ftgmac100_setup_mdio add ast2400/2500 phy-handle support 1 - - - --- 2020-10-15 Ivan Mikhaylov Not Applicable
[linux,dev-5.8] ARM: dts: aspeed: g220a: Add some gpios [linux,dev-5.8] ARM: dts: aspeed: g220a: Add some gpios - - 1 - --- 2020-10-14 John Wang Accepted
[1/1] net: ftgmac100: Fix Aspeed ast2600 TX hang issue Fix Aspeed ast2600 MAC TX hang - 1 1 - --- 2020-10-14 Dylan Hung Not Applicable
[1/1] net: ftgmac100: add handling of mdio/phy nodes for ast2400/2500 add ast2400/2500 phy-handle support - - - - --- 2020-10-13 Ivan Mikhaylov Not Applicable
[v2] i2c: npcm7xx: Support changing bus speed using debugfs. [v2] i2c: npcm7xx: Support changing bus speed using debugfs. - 1 2 1 --- 2020-10-13 Tali Perry Not Applicable
[3/3] pinctrl: aspeed-g6: Add sgpiom2 pinctrl setting Fix the memory layout and add sgpio node for aspeed g6 - - - - --- 2020-10-12 Billy Tsai Not Applicable
[2/3] Arm: dts: aspeed-g6: Add sgpio node Fix the memory layout and add sgpio node for aspeed g6 - - - - --- 2020-10-12 Billy Tsai Not Applicable
[1/3] Arm: dts: aspeed-g6: Fix the register range of gpio Fix the memory layout and add sgpio node for aspeed g6 - 1 1 - --- 2020-10-12 Billy Tsai Not Applicable
[v2,5/5] dt-bindings: aspeed-lpc: Remove LPC partitioning Remove LPC register partitioning - - - - --- 2020-10-05 Chia-Wei Wang Not Applicable
[v2,4/5] pinctrl: aspeed-g5: Fix LPC register offsets Remove LPC register partitioning - - - - --- 2020-10-05 Chia-Wei Wang Not Applicable
[v2,3/5] ipmi: kcs: aspeed: Fix LPC register offsets Remove LPC register partitioning - - - - --- 2020-10-05 Chia-Wei Wang Not Applicable
[v2,2/5] soc: aspeed: Fix LPC register offsets Remove LPC register partitioning - - - - --- 2020-10-05 Chia-Wei Wang Not Applicable
[v2,1/5] ARM: dts: Remove LPC BMC and Host partitions Remove LPC register partitioning - - - - --- 2020-10-05 Chia-Wei Wang Not Applicable
[3/3] ARM: dts: rainier: Don't shout addresses Enable pstore for Rainier - - 1 - --- 2020-10-02 Andrew Jeffery Accepted
[2/3] ARM: config: Enable PSTORE in aspeed_g5_defconfig Enable pstore for Rainier - - 1 - --- 2020-10-02 Andrew Jeffery Accepted
[1/3] ARM: dts: rainier: Add reserved memory for ramoops Enable pstore for Rainier - - - - --- 2020-10-02 Andrew Jeffery Not Applicable
[linux,dev-5.8] hwmon: Ampere Computing ALTRA SMPMPRO sensor driver [linux,dev-5.8] hwmon: Ampere Computing ALTRA SMPMPRO sensor driver - - - - --- 2020-09-30 Lancelot Kao Changes Requested
[linux,dev-5.8] ARM: dts: aspeed: amd-ethanolx: Update KCS nodes to use v2 binding [linux,dev-5.8] ARM: dts: aspeed: amd-ethanolx: Update KCS nodes to use v2 binding - - - - --- 2020-09-30 Konstantin Aladyshev Not Applicable
[v1] i2c: npcm7xx: Support changing bus speed using debugfs. [v1] i2c: npcm7xx: Support changing bus speed using debugfs. - 1 - - --- 2020-09-30 Tali Perry Not Applicable
[linux,dev-5.8] fsi: Aspeed: Add mutex to protect HW access [linux,dev-5.8] fsi: Aspeed: Add mutex to protect HW access - 1 2 - --- 2020-09-29 Eddie James Accepted
[v8,5/5] arm: dts: add new device nodes to NPCM750 device tree EVB arm: dts: add and modify device node in NPCM7xx device tree - - 1 - --- 2020-09-29 Tomer Maimon Not Applicable
[v8,4/5] arm: dts: add new device nodes to NPCM7XX device tree arm: dts: add and modify device node in NPCM7xx device tree - - 1 - --- 2020-09-29 Tomer Maimon Not Applicable
[v8,3/5] arm: dts: add pinctrl and GPIO node to NPCM7XX device tree arm: dts: add and modify device node in NPCM7xx device tree - - 1 - --- 2020-09-29 Tomer Maimon Not Applicable
[v8,2/5] arm: dts: modify NPCM7xx device tree timer register size arm: dts: add and modify device node in NPCM7xx device tree - - 1 - --- 2020-09-29 Tomer Maimon Not Applicable
[v8,1/5] arm: dts: modify NPCM7xx device tree clock parameter arm: dts: add and modify device node in NPCM7xx device tree - - 1 - --- 2020-09-29 Tomer Maimon Not Applicable
[linux,dev-5.8,v3,2/2] ARM: dts: aspeed: Add Bytedance g220a BMC machine [linux,dev-5.8,v3,1/2] ARM: dts: Add 64MiB OpenBMC flash layout - - 1 - --- 2020-09-29 John Wang Accepted
[linux,dev-5.8,v3,1/2] ARM: dts: Add 64MiB OpenBMC flash layout [linux,dev-5.8,v3,1/2] ARM: dts: Add 64MiB OpenBMC flash layout - - - - --- 2020-09-29 John Wang Accepted
[U-Boot,v2019.04-aspeed-openbmc,3/3] configs: Add AST2600 SPL eMMC configuration Aspeed: Support eMMC boot - - - - --- 2020-09-28 Eddie James New
« 1 2 ... 32 33 34 … 72 73 »