[linux,dev-5.8,v3,00/12] Add NPCM7xx patches to dev-5.8

In this patch set we will like to align with relevant modifications
in Nuvoton OpenBMC Linux kernel 5.4.

Linux upstream current status:
	1. npcm7xx clock driver - adding read only 
		flag to divider clocks, Will be sent to Linux community.
	2. Adding NPCM ADC calibration - Will be sent to Linux vanilla,
		but I am not sure it will be approved.
	3. Add DT restart priority and reset type support - sent to Linux 
		community la but havent approved yet.
	4. persist configuration to the pin control driver - asked by a costumer,
		didnt sent to Linux community.
	5. Add HGPIO pin support to NPCM7xx pinctrl driver - will be sent
		to Linux community
	6. JTAG master driver - will be sent to Linux community once we will 
		have BMC folder.

Changes since version 2:
- Address comments from Joel Stanley

Changes since version 1:
- Address comments from Jonathan Neuschäfer: removing trailing whitespace
	in NPCM watchdog documentation.
- Adding Stanley Chu to NPCM JTAG master driver


Tomer Maimon (12):
  clk: npcm7xx: add read only flag to divider clocks
  dt-binding: iio: add syscon property to NPCM ADC
  iio: adc: add calibration support to npcm ADC
  dts: npcm750: add fuse regmap support node
  dt-binding: watchdog: Add DT restart priority and reset type
  watchdog: npcm: Add DT restart priority and reset type support
  pinctrl: npcm7xx: Add HGPIO pin support to NPCM7xx pinctrl driver
  pinctrl: pinconf: add pin persist configuration
  pinctrl: npcm7xx: Add pin persist configuration support
  spi: npcm-pspi: Add full duplex support
  dt-binding: bmc: add NPCM7XX JTAG master documentation
  misc: npcm7xx-jtag-master: add NPCM7xx JTAG master driver

 .../bindings/bmc/npcm7xx-jtag-master.txt      |  38 +
 .../bindings/iio/adc/nuvoton,npcm-adc.txt     |   2 +
 .../bindings/watchdog/nuvoton,npcm-wdt.txt    |  34 +
 arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi |   6 +
 drivers/clk/clk-npcm7xx.c                     |  70 +-
 drivers/iio/adc/npcm_adc.c                    | 178 ++++
 drivers/misc/Kconfig                          |   6 +
 drivers/misc/Makefile                         |   1 +
 drivers/misc/npcm7xx-jtag-master.c            | 840 ++++++++++++++++++
 drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c     | 130 ++-
 drivers/pinctrl/pinconf-generic.c             |   3 +
 drivers/spi/spi-npcm-pspi.c                   |  75 +-
 drivers/watchdog/npcm_wdt.c                   | 117 ++-
 13 files changed, 1404 insertions(+), 96 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/bmc/npcm7xx-jtag-master.txt
 create mode 100644 drivers/misc/npcm7xx-jtag-master.c

Hi Tomer,

On Wed, 13 Jan 2021 at 20:00, Tomer Maimon <tmaimon77@gmail.com> wrote:
>
> In this patch set we will like to align with relevant modifications
> in Nuvoton OpenBMC Linux kernel 5.4.

I've reviewed some of the patches. There is some work to be done
before some of them will be accepted for mainline, but nothing that
blocks them from being in the openbmc tree, so I have merged the
series.

I've bumped the kernel in meta-nuvoton, please review that change:

 https://gerrit.openbmc-project.xyz/c/openbmc/meta-nuvoton/+/39742

Cheers,

Joel

>
> Linux upstream current status:
>         1. npcm7xx clock driver - adding read only
>                 flag to divider clocks, Will be sent to Linux community.
>         2. Adding NPCM ADC calibration - Will be sent to Linux vanilla,
>                 but I am not sure it will be approved.
>         3. Add DT restart priority and reset type support - sent to Linux
>                 community la but havent approved yet.
>         4. persist configuration to the pin control driver - asked by a costumer,
>                 didnt sent to Linux community.
>         5. Add HGPIO pin support to NPCM7xx pinctrl driver - will be sent
>                 to Linux community
>         6. JTAG master driver - will be sent to Linux community once we will
>                 have BMC folder.
>
> Changes since version 2:
> - Address comments from Joel Stanley
>
> Changes since version 1:
> - Address comments from Jonathan Neuschäfer: removing trailing whitespace
>         in NPCM watchdog documentation.
> - Adding Stanley Chu to NPCM JTAG master driver
>
>
> Tomer Maimon (12):
>   clk: npcm7xx: add read only flag to divider clocks
>   dt-binding: iio: add syscon property to NPCM ADC
>   iio: adc: add calibration support to npcm ADC
>   dts: npcm750: add fuse regmap support node
>   dt-binding: watchdog: Add DT restart priority and reset type
>   watchdog: npcm: Add DT restart priority and reset type support
>   pinctrl: npcm7xx: Add HGPIO pin support to NPCM7xx pinctrl driver
>   pinctrl: pinconf: add pin persist configuration
>   pinctrl: npcm7xx: Add pin persist configuration support
>   spi: npcm-pspi: Add full duplex support
>   dt-binding: bmc: add NPCM7XX JTAG master documentation
>   misc: npcm7xx-jtag-master: add NPCM7xx JTAG master driver
>
>  .../bindings/bmc/npcm7xx-jtag-master.txt      |  38 +
>  .../bindings/iio/adc/nuvoton,npcm-adc.txt     |   2 +
>  .../bindings/watchdog/nuvoton,npcm-wdt.txt    |  34 +
>  arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi |   6 +
>  drivers/clk/clk-npcm7xx.c                     |  70 +-
>  drivers/iio/adc/npcm_adc.c                    | 178 ++++
>  drivers/misc/Kconfig                          |   6 +
>  drivers/misc/Makefile                         |   1 +
>  drivers/misc/npcm7xx-jtag-master.c            | 840 ++++++++++++++++++
>  drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c     | 130 ++-
>  drivers/pinctrl/pinconf-generic.c             |   3 +
>  drivers/spi/spi-npcm-pspi.c                   |  75 +-
>  drivers/watchdog/npcm_wdt.c                   | 117 ++-
>  13 files changed, 1404 insertions(+), 96 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/bmc/npcm7xx-jtag-master.txt
>  create mode 100644 drivers/misc/npcm7xx-jtag-master.c
>
> --
> 2.22.0
>