diff mbox series

[net-next,2/2] net: sfp: relax bitrate-derived mode check

Message ID E1kmxYc-0001cd-Bt@rmk-PC.armlinux.org.uk
State Superseded
Headers show
Series Add support for VSOL V2801F/CarlitoxxPro CPGOS03 GPON module | expand

Commit Message

Russell King (Oracle) Dec. 9, 2020, 11:22 a.m. UTC 
Do not check the encoding when deriving 1000BASE-X from the bitrate
when no other modes are discovered. Some GPON modules (VSOL V2801F
and CarlitoxxPro CPGOS03-0490 v2.0) indicate NRZ encoding with a
1200Mbaud bitrate, but should be driven with 1000BASE-X on the host
side.

Tested-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
 drivers/net/phy/sfp-bus.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c
index 58014feedf6c..20b91f5dfc6e 100644
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
@@ -334,14 +334,13 @@  void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
 	}
 
 	/* If we haven't discovered any modes that this module supports, try
-	 * the encoding and bitrate to determine supported modes. Some BiDi
-	 * modules (eg, 1310nm/1550nm) are not 1000BASE-BX compliant due to
-	 * the differing wavelengths, so do not set any transceiver bits.
+	 * the bitrate to determine supported modes. Some BiDi modules (eg,
+	 * 1310nm/1550nm) are not 1000BASE-BX compliant due to the differing
+	 * wavelengths, so do not set any transceiver bits.
 	 */
 	if (bitmap_empty(modes, __ETHTOOL_LINK_MODE_MASK_NBITS)) {
-		/* If the encoding and bit rate allows 1000baseX */
-		if (id->base.encoding == SFF8024_ENCODING_8B10B && br_nom &&
-		    br_min <= 1300 && br_max >= 1200)
+		/* If the bit rate allows 1000baseX */
+		if (br_nom && br_min <= 1300 && br_max >= 1200)
 			phylink_set(modes, 1000baseX_Full);
 	}