Message ID | 570E3488.9060403@huawei.com |
---|---|
State | Changes Requested, archived |
Delegated to: | David Miller |
Headers | show |
Hello. On 4/13/2016 2:59 PM, Weidong Wang wrote: > When tested the PHY SGMII Loopback,: > 1.set the LOOPBACK bit, > 2.set the autoneg to AUTONEG_DISABLE, it calls the > genphy_setup_forced which will clear the bit. > > So just keep the LOOPBACK bit while setup forced mode. > > Signed-off-by: Weidong Wang <wangweidong1@huawei.com> > --- > drivers/net/phy/phy_device.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c > index e551f3a..8da4b80 100644 > --- a/drivers/net/phy/phy_device.c > +++ b/drivers/net/phy/phy_device.c > @@ -1124,7 +1124,9 @@ static int genphy_config_advert(struct phy_device *phydev) > int genphy_setup_forced(struct phy_device *phydev) > { > int ctl = 0; > + int val = phy_read(phydev, MII_BMCR); Please place this declaration first, DaveM prefers declarations to be sorted from longest to shortest. > > + ctl |= val & BMCR_LOOPBACK; Just =, removing the 'ctl' initializer, please. [...] MBR, Sergei
On 13/04/16 04:59, Weidong Wang wrote: > When tested the PHY SGMII Loopback,: > 1.set the LOOPBACK bit, > 2.set the autoneg to AUTONEG_DISABLE, it calls the > genphy_setup_forced which will clear the bit. > > So just keep the LOOPBACK bit while setup forced mode. Humm, it makes sense why we want this one, but maybe we want other bits to be preserved too, like MII_ISOLATE for instance? Or maybe we should have a separate way to put the PHY into loopback mode which is deterministic and takes care of forcing the link at the same time? > > Signed-off-by: Weidong Wang <wangweidong1@huawei.com> > --- > drivers/net/phy/phy_device.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c > index e551f3a..8da4b80 100644 > --- a/drivers/net/phy/phy_device.c > +++ b/drivers/net/phy/phy_device.c > @@ -1124,7 +1124,9 @@ static int genphy_config_advert(struct phy_device *phydev) > int genphy_setup_forced(struct phy_device *phydev) > { > int ctl = 0; > + int val = phy_read(phydev, MII_BMCR); > > + ctl |= val & BMCR_LOOPBACK; > phydev->pause = 0; > phydev->asym_pause = 0; > > -- 2.7.0 >
On 2016/4/13 22:19, Sergei Shtylyov wrote: > Hello. > > On 4/13/2016 2:59 PM, Weidong Wang wrote: > >> When tested the PHY SGMII Loopback,: >> 1.set the LOOPBACK bit, >> 2.set the autoneg to AUTONEG_DISABLE, it calls the >> genphy_setup_forced which will clear the bit. >> >> So just keep the LOOPBACK bit while setup forced mode. >> >> Signed-off-by: Weidong Wang <wangweidong1@huawei.com> >> --- >> drivers/net/phy/phy_device.c | 2 ++ >> 1 file changed, 2 insertions(+) >> >> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c >> index e551f3a..8da4b80 100644 >> --- a/drivers/net/phy/phy_device.c >> +++ b/drivers/net/phy/phy_device.c >> @@ -1124,7 +1124,9 @@ static int genphy_config_advert(struct phy_device *phydev) >> int genphy_setup_forced(struct phy_device *phydev) >> { >> int ctl = 0; >> + int val = phy_read(phydev, MII_BMCR); > > Please place this declaration first, DaveM prefers declarations to be sorted from longest to shortest. > >> >> + ctl |= val & BMCR_LOOPBACK; > > Just =, removing the 'ctl' initializer, please. > > [...] > > MBR, Sergei > Got it. Regards, Weidong > >
On 2016/4/14 2:41, Florian Fainelli wrote: > On 13/04/16 04:59, Weidong Wang wrote: >> When tested the PHY SGMII Loopback,: >> 1.set the LOOPBACK bit, >> 2.set the autoneg to AUTONEG_DISABLE, it calls the >> genphy_setup_forced which will clear the bit. >> >> So just keep the LOOPBACK bit while setup forced mode. > > Humm, it makes sense why we want this one, but maybe we want other bits > to be preserved too, like MII_ISOLATE for instance? > I will add the MII_ISOLATE as well. > Or maybe we should have a separate way to put the PHY into loopback mode > which is deterministic and takes care of forcing the link at the same time? > I test with the loopback mode, and the link status is undeterminable. >> >> Signed-off-by: Weidong Wang <wangweidong1@huawei.com> >> --- >> drivers/net/phy/phy_device.c | 2 ++ >> 1 file changed, 2 insertions(+) >> >> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c >> index e551f3a..8da4b80 100644 >> --- a/drivers/net/phy/phy_device.c >> +++ b/drivers/net/phy/phy_device.c >> @@ -1124,7 +1124,9 @@ static int genphy_config_advert(struct phy_device *phydev) >> int genphy_setup_forced(struct phy_device *phydev) >> { >> int ctl = 0; >> + int val = phy_read(phydev, MII_BMCR); >> >> + ctl |= val & BMCR_LOOPBACK; >> phydev->pause = 0; >> phydev->asym_pause = 0; >> >> -- 2.7.0 >> > >
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index e551f3a..8da4b80 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1124,7 +1124,9 @@ static int genphy_config_advert(struct phy_device *phydev) int genphy_setup_forced(struct phy_device *phydev) { int ctl = 0; + int val = phy_read(phydev, MII_BMCR); + ctl |= val & BMCR_LOOPBACK; phydev->pause = 0; phydev->asym_pause = 0;
When tested the PHY SGMII Loopback,: 1.set the LOOPBACK bit, 2.set the autoneg to AUTONEG_DISABLE, it calls the genphy_setup_forced which will clear the bit. So just keep the LOOPBACK bit while setup forced mode. Signed-off-by: Weidong Wang <wangweidong1@huawei.com> --- drivers/net/phy/phy_device.c | 2 ++ 1 file changed, 2 insertions(+) -- 2.7.0