From b359aeec95b81262f352f7613178949b94b9a097 Mon Sep 17 00:00:00 2001
From: Alexei Starovoitov <ast@plumgrid.com>
Date: Wed, 27 Aug 2014 13:37:13 -0700
Subject: [PATCH] net: filter: split filter.h and expose eBPF to user space
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
---
include/linux/filter.h | 57 +-------------
include/uapi/linux/Kbuild | 1 +
include/uapi/linux/bpf.h | 179 ++++++++++++++++++++++++++++++++++++++++++++
include/uapi/linux/filter.h | 142 ++---------------------------------
4 files changed, 186 insertions(+), 193 deletions(-)
create mode 100644 include/uapi/linux/bpf.h
@@ -8,54 +8,7 @@
#include <linux/compat.h>
#include <linux/skbuff.h>
#include <linux/workqueue.h>
-#include <uapi/linux/filter.h>
-
-/* Internally used and optimized filter representation with extended
- * instruction set based on top of classic BPF.
- */
-
-/* instruction classes */
-#define BPF_ALU64 0x07 /* alu mode in double word width */
-
-/* ld/ldx fields */
-#define BPF_DW 0x18 /* double word */
-#define BPF_XADD 0xc0 /* exclusive add */
-
-/* alu/jmp fields */
-#define BPF_MOV 0xb0 /* mov reg to reg */
-#define BPF_ARSH 0xc0 /* sign extending arithmetic shift right */
-
-/* change endianness of a register */
-#define BPF_END 0xd0 /* flags for endianness conversion: */
-#define BPF_TO_LE 0x00 /* convert to little-endian */
-#define BPF_TO_BE 0x08 /* convert to big-endian */
-#define BPF_FROM_LE BPF_TO_LE
-#define BPF_FROM_BE BPF_TO_BE
-
-#define BPF_JNE 0x50 /* jump != */
-#define BPF_JSGT 0x60 /* SGT is signed '>', GT in x86 */
-#define BPF_JSGE 0x70 /* SGE is signed '>=', GE in x86 */
-#define BPF_CALL 0x80 /* function call */
-#define BPF_EXIT 0x90 /* function return */
-
-/* Register numbers */
-enum {
- BPF_REG_0 = 0,
- BPF_REG_1,
- BPF_REG_2,
- BPF_REG_3,
- BPF_REG_4,
- BPF_REG_5,
- BPF_REG_6,
- BPF_REG_7,
- BPF_REG_8,
- BPF_REG_9,
- BPF_REG_10,
- __MAX_BPF_REG,
-};
-
-/* BPF has 10 general purpose 64-bit registers and stack frame. */
-#define MAX_BPF_REG __MAX_BPF_REG
+#include <uapi/linux/bpf.h>
/* ArgX, context and stack frame pointer register positions. Note,
* Arg1, Arg2, Arg3, etc are used as argument mappings of function
@@ -317,14 +270,6 @@ enum {
#define SK_RUN_FILTER(filter, ctx) \
(*filter->prog->bpf_func)(ctx, filter->prog->insnsi)
-struct bpf_insn {
- __u8 code; /* opcode */
- __u8 dst_reg:4; /* dest register */
- __u8 src_reg:4; /* source register */
- __s16 off; /* signed offset */
- __s32 imm; /* signed immediate constant */
-};
-
#ifdef CONFIG_COMPAT
/* A struct sock_filter is architecture independent. */
struct compat_sock_fprog {
@@ -67,6 +67,7 @@ header-y += bfs_fs.h
header-y += binfmts.h
header-y += blkpg.h
header-y += blktrace_api.h
+header-y += bpf.h
header-y += bpqether.h
header-y += bsg.h
header-y += btrfs.h
new file mode 100644
@@ -0,0 +1,179 @@
+#ifndef __UAPI_BPF_H
+#define __UAPI_BPF_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/* Current version of the filter code architecture. */
+#define BPF_MAJOR_VERSION 1
+#define BPF_MINOR_VERSION 1
+
+/* Try and keep these values and structures similar to BSD,
+ * especially the BPF code definitions which need to match
+ * so you can share filters.
+ */
+struct sock_filter { /* Filter block */
+ __u16 code; /* Actual filter code */
+ __u8 jt; /* Jump true */
+ __u8 jf; /* Jump false */
+ __u32 k; /* Generic multiuse field */
+};
+
+struct sock_fprog { /* Required for SO_ATTACH_FILTER. */
+ unsigned short len; /* Number of filter blocks */
+ struct sock_filter __user *filter;
+};
+
+/* Instruction classes */
+#define BPF_CLASS(code) ((code) & 0x07)
+#define BPF_LD 0x00
+#define BPF_LDX 0x01
+#define BPF_ST 0x02
+#define BPF_STX 0x03
+#define BPF_ALU 0x04
+#define BPF_JMP 0x05
+#define BPF_RET 0x06
+#define BPF_MISC 0x07
+
+/* ld/ldx fields */
+#define BPF_SIZE(code) ((code) & 0x18)
+#define BPF_W 0x00
+#define BPF_H 0x08
+#define BPF_B 0x10
+#define BPF_MODE(code) ((code) & 0xe0)
+#define BPF_IMM 0x00
+#define BPF_ABS 0x20
+#define BPF_IND 0x40
+#define BPF_MEM 0x60
+#define BPF_LEN 0x80
+#define BPF_MSH 0xa0
+
+/* alu/jmp fields */
+#define BPF_OP(code) ((code) & 0xf0)
+#define BPF_ADD 0x00
+#define BPF_SUB 0x10
+#define BPF_MUL 0x20
+#define BPF_DIV 0x30
+#define BPF_OR 0x40
+#define BPF_AND 0x50
+#define BPF_LSH 0x60
+#define BPF_RSH 0x70
+#define BPF_NEG 0x80
+#define BPF_MOD 0x90
+#define BPF_XOR 0xa0
+
+#define BPF_JA 0x00
+#define BPF_JEQ 0x10
+#define BPF_JGT 0x20
+#define BPF_JGE 0x30
+#define BPF_JSET 0x40
+#define BPF_SRC(code) ((code) & 0x08)
+#define BPF_K 0x00
+#define BPF_X 0x08
+
+/* ret - BPF_K and BPF_X also apply */
+#define BPF_RVAL(code) ((code) & 0x18)
+#define BPF_A 0x10
+
+/* misc */
+#define BPF_MISCOP(code) ((code) & 0xf8)
+#define BPF_TAX 0x00
+#define BPF_TXA 0x80
+
+#ifndef __WITHOUT_EBPF
+/* Extended instruction set based on top of classic BPF */
+
+/* Instruction classes */
+#define BPF_ALU64 0x07 /* ALU mode in double word width */
+
+/* ld/ldx fields */
+#define BPF_DW 0x18 /* Double word */
+#define BPF_XADD 0xc0 /* Exclusive add */
+
+/* alu/jmp fields */
+#define BPF_MOV 0xb0 /* mov reg to reg */
+#define BPF_ARSH 0xc0 /* Sign extending arithmetic shift right */
+
+/* Change endianness of a register */
+#define BPF_END 0xd0 /* Flags for endianness conversion: */
+#define BPF_TO_LE 0x00 /* Convert to little-endian */
+#define BPF_TO_BE 0x08 /* Convert to big-endian */
+#define BPF_FROM_LE BPF_TO_LE
+#define BPF_FROM_BE BPF_TO_BE
+
+#define BPF_JNE 0x50 /* jump != */
+#define BPF_JSGT 0x60 /* SGT is signed '>', GT in x86 */
+#define BPF_JSGE 0x70 /* SGE is signed '>=', GE in x86 */
+#define BPF_CALL 0x80 /* Function call */
+#define BPF_EXIT 0x90 /* Function return */
+
+/* Register numbers */
+enum {
+ BPF_REG_0 = 0,
+ BPF_REG_1,
+ BPF_REG_2,
+ BPF_REG_3,
+ BPF_REG_4,
+ BPF_REG_5,
+ BPF_REG_6,
+ BPF_REG_7,
+ BPF_REG_8,
+ BPF_REG_9,
+ BPF_REG_10,
+ __MAX_BPF_REG,
+};
+
+/* BPF has 10 general purpose 64-bit registers and stack frame. */
+#define MAX_BPF_REG __MAX_BPF_REG
+
+struct bpf_insn {
+ __u8 code; /* Opcode */
+ __u8 dst_reg:4; /* Dest register */
+ __u8 src_reg:4; /* Source register */
+ __s16 off; /* Signed offset */
+ __s32 imm; /* Signed immediate constant */
+};
+
+#endif /* __WITHOUT_EBPF */
+
+#ifndef BPF_MAXINSNS
+# define BPF_MAXINSNS 4096
+#endif
+
+/* Macros for filter block array initializers. */
+#ifndef BPF_STMT
+# define BPF_STMT(code, k) { (unsigned short)(code), 0, 0, k }
+#endif
+#ifndef BPF_JUMP
+# define BPF_JUMP(code, k, jt, jf) { (unsigned short)(code), jt, jf, k }
+#endif
+
+/* Number of scratch memory words for: BPF_ST and BPF_STX */
+#define BPF_MEMWORDS 16
+
+/* Rationale: Negative offsets are invalid in BPF. We use
+ * them to reference ancillary data. Unlike introduction new
+ * instructions, it does not break existing compilers /
+ * optimizers.
+ */
+#define SKF_AD_OFF (-0x1000)
+#define SKF_AD_PROTOCOL 0
+#define SKF_AD_PKTTYPE 4
+#define SKF_AD_IFINDEX 8
+#define SKF_AD_NLATTR 12
+#define SKF_AD_NLATTR_NEST 16
+#define SKF_AD_MARK 20
+#define SKF_AD_QUEUE 24
+#define SKF_AD_HATYPE 28
+#define SKF_AD_RXHASH 32
+#define SKF_AD_CPU 36
+#define SKF_AD_ALU_XOR_X 40
+#define SKF_AD_VLAN_TAG 44
+#define SKF_AD_VLAN_TAG_PRESENT 48
+#define SKF_AD_PAY_OFFSET 52
+#define SKF_AD_RANDOM 56
+#define SKF_AD_MAX 60
+#define SKF_NET_OFF (-0x100000)
+#define SKF_LL_OFF (-0x200000)
+
+#endif /* __UAPI_BPF_H */
@@ -1,139 +1,7 @@
-/*
- * Linux Socket Filter Data Structures
- */
+#ifndef __UAPI_FILTER_H
+#define __UAPI_FILTER_H
-#ifndef _UAPI__LINUX_FILTER_H__
-#define _UAPI__LINUX_FILTER_H__
+#define __WITHOUT_EBPF
+#include <linux/bpf.h>
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-
-/*
- * Current version of the filter code architecture.
- */
-#define BPF_MAJOR_VERSION 1
-#define BPF_MINOR_VERSION 1
-
-/*
- * Try and keep these values and structures similar to BSD, especially
- * the BPF code definitions which need to match so you can share filters
- */
-
-struct sock_filter { /* Filter block */
- __u16 code; /* Actual filter code */
- __u8 jt; /* Jump true */
- __u8 jf; /* Jump false */
- __u32 k; /* Generic multiuse field */
-};
-
-struct sock_fprog { /* Required for SO_ATTACH_FILTER. */
- unsigned short len; /* Number of filter blocks */
- struct sock_filter __user *filter;
-};
-
-/*
- * Instruction classes
- */
-
-#define BPF_CLASS(code) ((code) & 0x07)
-#define BPF_LD 0x00
-#define BPF_LDX 0x01
-#define BPF_ST 0x02
-#define BPF_STX 0x03
-#define BPF_ALU 0x04
-#define BPF_JMP 0x05
-#define BPF_RET 0x06
-#define BPF_MISC 0x07
-
-/* ld/ldx fields */
-#define BPF_SIZE(code) ((code) & 0x18)
-#define BPF_W 0x00
-#define BPF_H 0x08
-#define BPF_B 0x10
-#define BPF_MODE(code) ((code) & 0xe0)
-#define BPF_IMM 0x00
-#define BPF_ABS 0x20
-#define BPF_IND 0x40
-#define BPF_MEM 0x60
-#define BPF_LEN 0x80
-#define BPF_MSH 0xa0
-
-/* alu/jmp fields */
-#define BPF_OP(code) ((code) & 0xf0)
-#define BPF_ADD 0x00
-#define BPF_SUB 0x10
-#define BPF_MUL 0x20
-#define BPF_DIV 0x30
-#define BPF_OR 0x40
-#define BPF_AND 0x50
-#define BPF_LSH 0x60
-#define BPF_RSH 0x70
-#define BPF_NEG 0x80
-#define BPF_MOD 0x90
-#define BPF_XOR 0xa0
-
-#define BPF_JA 0x00
-#define BPF_JEQ 0x10
-#define BPF_JGT 0x20
-#define BPF_JGE 0x30
-#define BPF_JSET 0x40
-#define BPF_SRC(code) ((code) & 0x08)
-#define BPF_K 0x00
-#define BPF_X 0x08
-
-/* ret - BPF_K and BPF_X also apply */
-#define BPF_RVAL(code) ((code) & 0x18)
-#define BPF_A 0x10
-
-/* misc */
-#define BPF_MISCOP(code) ((code) & 0xf8)
-#define BPF_TAX 0x00
-#define BPF_TXA 0x80
-
-#ifndef BPF_MAXINSNS
-#define BPF_MAXINSNS 4096
-#endif
-
-/*
- * Macros for filter block array initializers.
- */
-#ifndef BPF_STMT
-#define BPF_STMT(code, k) { (unsigned short)(code), 0, 0, k }
-#endif
-#ifndef BPF_JUMP
-#define BPF_JUMP(code, k, jt, jf) { (unsigned short)(code), jt, jf, k }
-#endif
-
-/*
- * Number of scratch memory words for: BPF_ST and BPF_STX
- */
-#define BPF_MEMWORDS 16
-
-/* RATIONALE. Negative offsets are invalid in BPF.
- We use them to reference ancillary data.
- Unlike introduction new instructions, it does not break
- existing compilers/optimizers.
- */
-#define SKF_AD_OFF (-0x1000)
-#define SKF_AD_PROTOCOL 0
-#define SKF_AD_PKTTYPE 4
-#define SKF_AD_IFINDEX 8
-#define SKF_AD_NLATTR 12
-#define SKF_AD_NLATTR_NEST 16
-#define SKF_AD_MARK 20
-#define SKF_AD_QUEUE 24
-#define SKF_AD_HATYPE 28
-#define SKF_AD_RXHASH 32
-#define SKF_AD_CPU 36
-#define SKF_AD_ALU_XOR_X 40
-#define SKF_AD_VLAN_TAG 44
-#define SKF_AD_VLAN_TAG_PRESENT 48
-#define SKF_AD_PAY_OFFSET 52
-#define SKF_AD_RANDOM 56
-#define SKF_AD_MAX 60
-#define SKF_NET_OFF (-0x100000)
-#define SKF_LL_OFF (-0x200000)
-
-
-#endif /* _UAPI__LINUX_FILTER_H__ */
+#endif /* __UAPI_FILTER_H */
--
1.7.11.7