@@ -577,8 +577,8 @@ static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
We set both dma_mask and consistent_dma_mask to 28 bits
and pray pci_alloc_consistent() will use this info. It should
work on most platforms */
- if (pci_set_consistent_dma_mask(pdev, DMA_28BIT_MASK) ||
- pci_set_dma_mask(pdev, DMA_28BIT_MASK)) {
+ if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(28)) ||
+ pci_set_dma_mask(pdev, DMA_BIT_MASK(28))) {
printk(KERN_ERR "wanXL: No usable DMA configuration\n");
return -EIO;
}
@@ -689,8 +689,8 @@ static int __devinit snd_als300_create(struct snd_card *card,
if ((err = pci_enable_device(pci)) < 0)
return err;
- if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
- pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
+ if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
printk(KERN_ERR "error setting 28bit DMA mask\n");
pci_disable_device(pci);
return -ENXIO;
@@ -897,8 +897,8 @@ static int __devinit snd_emu10k1x_create(struct snd_card *card,
if ((err = pci_enable_device(pci)) < 0)
return err;
- if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
- pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
+ if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
snd_printk(KERN_ERR "error to set 28bit mask DMA\n");
pci_disable_device(pci);
return -ENXIO;
@@ -2539,8 +2539,8 @@ static int __devinit snd_es1968_create(struct snd_card *card,
if ((err = pci_enable_device(pci)) < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 28 bits */
- if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
- pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
+ if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
@@ -2533,8 +2533,8 @@ static int __devinit snd_ice1712_create(struct snd_card *card,
if (err < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 28 bits */
- if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
- pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
+ if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
@@ -2530,8 +2530,8 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci,
return -EIO;
/* check, if we can restrict PCI DMA transfers to 28 bits */
- if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
- pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
+ if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
Replace all DMA_28BIT_MASK macro with DMA_BIT_MASK(28) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> --- drivers/net/wan/wanxl.c | 4 ++-- sound/pci/als300.c | 4 ++-- sound/pci/emu10k1/emu10k1x.c | 4 ++-- sound/pci/es1968.c | 4 ++-- sound/pci/ice1712/ice1712.c | 4 ++-- sound/pci/maestro3.c | 4 ++-- 6 files changed, 12 insertions(+), 12 deletions(-)