@@ -193,9 +193,10 @@
#define XGMAC_AIE BIT(14)
#define XGMAC_RBUE BIT(7)
#define XGMAC_RIE BIT(6)
+#define XGMAC_TBUE BIT(2)
#define XGMAC_TIE BIT(0)
#define XGMAC_DMA_INT_DEFAULT_EN (XGMAC_NIE | XGMAC_AIE | XGMAC_RBUE | \
- XGMAC_RIE | XGMAC_TIE)
+ XGMAC_RIE | XGMAC_TBUE | XGMAC_TIE)
#define XGMAC_DMA_CH_Rx_WATCHDOG(x) (0x0000313c + (0x80 * (x)))
#define XGMAC_RWT GENMASK(7, 0)
#define XGMAC_DMA_CH_STATUS(x) (0x00003160 + (0x80 * (x)))
@@ -204,6 +205,7 @@
#define XGMAC_FBE BIT(12)
#define XGMAC_RBU BIT(7)
#define XGMAC_RI BIT(6)
+#define XGMAC_TBU BIT(2)
#define XGMAC_TPS BIT(1)
#define XGMAC_TI BIT(0)
@@ -283,12 +283,10 @@ static int dwxgmac2_dma_interrupt(void __iomem *ioaddr,
x->normal_irq_n++;
if (likely(intr_status & XGMAC_RI)) {
- if (likely(intr_en & XGMAC_RIE)) {
- x->rx_normal_irq_n++;
- ret |= handle_rx;
- }
+ x->rx_normal_irq_n++;
+ ret |= handle_rx;
}
- if (likely(intr_status & XGMAC_TI)) {
+ if (likely(intr_status & (XGMAC_TI | XGMAC_TBU))) {
x->tx_normal_irq_n++;
ret |= handle_tx;
}
TBU interrupt is a normal interrupt and can be used to trigger the cleaning of TX path. Lets check if it's active in DMA interrupt handler. While at it, refactor a little bit the function: - Don't check if RI is enabled because at function exit we will only clear the interrupts that are enabled so, no event will be missed. In my tests withe XGMAC2 this increased performance. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> --- drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h | 4 +++- drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 8 +++----- 2 files changed, 6 insertions(+), 6 deletions(-)