From patchwork Mon Nov 16 11:15:11 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Marek_Beh=C3=BAn?= X-Patchwork-Id: 1400861 Return-Path: X-Original-To: patchwork-incoming-netdev@ozlabs.org Delivered-To: patchwork-incoming-netdev@ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=netdev-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) header.from=kernel.org Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=kernel.org header.i=@kernel.org header.a=rsa-sha256 header.s=default header.b=HpjhwPy5; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4CZRM62ndPz9s1l for ; Mon, 16 Nov 2020 22:15:30 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729601AbgKPLP3 (ORCPT ); Mon, 16 Nov 2020 06:15:29 -0500 Received: from mail.kernel.org ([198.145.29.99]:55646 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726353AbgKPLP3 (ORCPT ); Mon, 16 Nov 2020 06:15:29 -0500 Received: from dellmb.labs.office.nic.cz (nat-1.nic.cz [217.31.205.1]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPSA id 1B2BA22384; Mon, 16 Nov 2020 11:15:26 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=default; t=1605525328; bh=NA5MG7RtiuAxL9MFb2M83OH4P7c09St91k6Yfe8tOc4=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=HpjhwPy5QBbfp41IO/ZXyVs83FPuzyux4Tt1pEmOPoDzGoDECnR0W+d4lLN/xF/RD +0lX3k5nKS5zSPhUxa3p8oEqJbYH2Y9Afuppk1AGP3X6fBn9Liv7wh6TWgWaFc+1QZ Kb4HHzo7A9XBFcJDwU12iozzJFtWl0LR/ht6myZY= From: =?utf-8?q?Marek_Beh=C3=BAn?= To: Russell King , netdev@vger.kernel.org, davem@davemloft.net, Jakub Kicinski Cc: =?utf-8?q?Marek_Beh=C3=BAn?= , Andrew Lunn Subject: [PATCH net-next v3 5/5] net: sfp: add support for multigig RollBall transceivers Date: Mon, 16 Nov 2020 12:15:11 +0100 Message-Id: <20201116111511.5061-6-kabel@kernel.org> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20201116111511.5061-1-kabel@kernel.org> References: <20201116111511.5061-1-kabel@kernel.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org This adds support for multigig copper SFP modules from RollBall/Hilink. These modules have a specific way to access clause 45 registers of the internal PHY. We also need to wait at least 22 seconds after deasserting TX disable before accessing the PHY. The code waits for 25 seconds just to be sure. Signed-off-by: Marek Behún Reviewed-by: Russell King Cc: Andrew Lunn --- drivers/net/phy/sfp.c | 35 +++++++++++++++++++++++++++++------ 1 file changed, 29 insertions(+), 6 deletions(-) diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index c486caabb44a..1a61eaae643b 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -165,6 +165,7 @@ static const enum gpiod_flags gpio_flags[] = { * on board (for a copper SFP) time to initialise. */ #define T_WAIT msecs_to_jiffies(50) +#define T_WAIT_ROLLBALL msecs_to_jiffies(25000) #define T_START_UP msecs_to_jiffies(300) #define T_START_UP_BAD_GPON msecs_to_jiffies(60000) @@ -204,8 +205,11 @@ static const enum gpiod_flags gpio_flags[] = { /* SFP modules appear to always have their PHY configured for bus address * 0x56 (which with mdio-i2c, translates to a PHY address of 22). + * RollBall SFPs access phy via SFP Enhanced Digital Diagnostic Interface + * via address 0x51 (mdio-i2c will use RollBall protocol on this address). */ -#define SFP_PHY_ADDR 22 +#define SFP_PHY_ADDR 22 +#define SFP_PHY_ADDR_ROLLBALL 17 struct sff_data { unsigned int gpios; @@ -218,6 +222,7 @@ struct sfp { struct mii_bus *i2c_mii; struct sfp_bus *sfp_bus; enum mdio_i2c_proto mdio_protocol; + int phy_addr; struct phy_device *mod_phy; const struct sff_data *type; u32 max_power_mW; @@ -249,6 +254,7 @@ struct sfp { struct sfp_eeprom_id id; unsigned int module_power_mW; unsigned int module_t_start_up; + unsigned int module_t_wait; #if IS_ENABLED(CONFIG_HWMON) struct sfp_diag diag; @@ -1443,7 +1449,7 @@ static int sfp_sm_probe_phy(struct sfp *sfp, bool is_c45) struct phy_device *phy; int err; - phy = get_phy_device(sfp->i2c_mii, SFP_PHY_ADDR, is_c45); + phy = get_phy_device(sfp->i2c_mii, sfp->phy_addr, is_c45); if (phy == ERR_PTR(-ENODEV)) return PTR_ERR(phy); if (IS_ERR(phy)) { @@ -1781,6 +1787,22 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report) sfp->module_t_start_up = T_START_UP; sfp->mdio_protocol = MDIO_I2C_DEFAULT; + sfp->phy_addr = SFP_PHY_ADDR; + sfp->module_t_wait = T_WAIT; + + if (((!memcmp(id.base.vendor_name, "OEM ", 16) || + !memcmp(id.base.vendor_name, "Turris ", 16)) && + (!memcmp(id.base.vendor_pn, "SFP-10G-T ", 16) || + !memcmp(id.base.vendor_pn, "RTSFP-10", 8)))) { + sfp->mdio_protocol = MDIO_I2C_ROLLBALL; + sfp->phy_addr = SFP_PHY_ADDR_ROLLBALL; + sfp->module_t_wait = T_WAIT_ROLLBALL; + + /* RollBall SFPs may have wrong (zero) extended compliacne code + * burned in EEPROM. For PHY probing we need the correct one. + */ + id.base.extended_cc = SFF8024_ECC_10GBASE_T_SFI; + } return 0; } @@ -1977,9 +1999,10 @@ static void sfp_sm_main(struct sfp *sfp, unsigned int event) /* We need to check the TX_FAULT state, which is not defined * while TX_DISABLE is asserted. The earliest we want to do - * anything (such as probe for a PHY) is 50ms. + * anything (such as probe for a PHY) is 50ms (or more on + * specific modules). */ - sfp_sm_next(sfp, SFP_S_WAIT, T_WAIT); + sfp_sm_next(sfp, SFP_S_WAIT, sfp->module_t_wait); break; case SFP_S_WAIT: @@ -1993,8 +2016,8 @@ static void sfp_sm_main(struct sfp *sfp, unsigned int event) * deasserting. */ timeout = sfp->module_t_start_up; - if (timeout > T_WAIT) - timeout -= T_WAIT; + if (timeout > sfp->module_t_wait) + timeout -= sfp->module_t_wait; else timeout = 1;