From patchwork Thu Nov 12 15:35:27 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Christian Eggers X-Patchwork-Id: 1399037 Return-Path: X-Original-To: patchwork-incoming-netdev@ozlabs.org Delivered-To: patchwork-incoming-netdev@ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=netdev-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=none (p=none dis=none) header.from=arri.de Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4CX5PG4R0Tz9sSs for ; Fri, 13 Nov 2020 02:39:14 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728699AbgKLPjM (ORCPT ); Thu, 12 Nov 2020 10:39:12 -0500 Received: from mailout09.rmx.de ([94.199.88.74]:33893 "EHLO mailout09.rmx.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728345AbgKLPjM (ORCPT ); Thu, 12 Nov 2020 10:39:12 -0500 Received: from kdin01.retarus.com (kdin01.dmz1.retloc [172.19.17.48]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by mailout09.rmx.de (Postfix) with ESMTPS id 4CX5P42pCjzbk4D; Thu, 12 Nov 2020 16:39:04 +0100 (CET) Received: from mta.arri.de (unknown [217.111.95.66]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-SHA384 (256/256 bits)) (No client certificate requested) by kdin01.retarus.com (Postfix) with ESMTPS id 4CX5MW22NNz2xFM; Thu, 12 Nov 2020 16:37:43 +0100 (CET) Received: from N95HX1G2.wgnetz.xx (192.168.54.59) by mta.arri.de (192.168.100.104) with Microsoft SMTP Server (TLS) id 14.3.487.0; Thu, 12 Nov 2020 16:36:26 +0100 From: Christian Eggers To: Vladimir Oltean , Jakub Kicinski , Andrew Lunn , Richard Cochran , "Rob Herring" CC: Vivien Didelot , "David S . Miller" , Kurt Kanzenbach , George McCollister , Marek Vasut , Helmut Grohne , Paul Barker , Codrin Ciubotariu , Tristram Ha , Woojung Huh , Microchip Linux Driver Support , Christian Eggers , , , Subject: [PATCH net-next v2 01/11] dt-bindings: net: dsa: convert ksz bindings document to yaml Date: Thu, 12 Nov 2020 16:35:27 +0100 Message-ID: <20201112153537.22383-2-ceggers@arri.de> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20201112153537.22383-1-ceggers@arri.de> References: <20201112153537.22383-1-ceggers@arri.de> MIME-Version: 1.0 X-Originating-IP: [192.168.54.59] X-RMX-ID: 20201112-163745-4CX5MW22NNz2xFM-0@kdin01 X-RMX-SOURCE: 217.111.95.66 Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org Convert the bindings document for Microchip KSZ Series Ethernet switches from txt to yaml. Signed-off-by: Christian Eggers --- .../devicetree/bindings/net/dsa/ksz.txt | 125 --------------- .../bindings/net/dsa/microchip,ksz.yaml | 150 ++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 151 insertions(+), 126 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/dsa/ksz.txt create mode 100644 Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt deleted file mode 100644 index 95e91e84151c..000000000000 --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt +++ /dev/null @@ -1,125 +0,0 @@ -Microchip KSZ Series Ethernet switches -================================== - -Required properties: - -- compatible: For external switch chips, compatible string must be exactly one - of the following: - - "microchip,ksz8765" - - "microchip,ksz8794" - - "microchip,ksz8795" - - "microchip,ksz9477" - - "microchip,ksz9897" - - "microchip,ksz9896" - - "microchip,ksz9567" - - "microchip,ksz8565" - - "microchip,ksz9893" - - "microchip,ksz9563" - - "microchip,ksz8563" - -Optional properties: - -- reset-gpios : Should be a gpio specifier for a reset line -- microchip,synclko-125 : Set if the output SYNCLKO frequency should be set to - 125MHz instead of 25MHz. - -See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional -required and optional properties. - -Examples: - -Ethernet switch connected via SPI to the host, CPU port wired to eth0: - - eth0: ethernet@10001000 { - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - spi1: spi@f8008000 { - pinctrl-0 = <&pinctrl_spi_ksz>; - cs-gpios = <&pioC 25 0>; - id = <1>; - - ksz9477: ksz9477@0 { - compatible = "microchip,ksz9477"; - reg = <0>; - - spi-max-frequency = <44000000>; - spi-cpha; - spi-cpol; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - label = "lan1"; - }; - port@1 { - reg = <1>; - label = "lan2"; - }; - port@2 { - reg = <2>; - label = "lan3"; - }; - port@3 { - reg = <3>; - label = "lan4"; - }; - port@4 { - reg = <4>; - label = "lan5"; - }; - port@5 { - reg = <5>; - label = "cpu"; - ethernet = <ð0>; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; - ksz8565: ksz8565@0 { - compatible = "microchip,ksz8565"; - reg = <0>; - - spi-max-frequency = <44000000>; - spi-cpha; - spi-cpol; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - label = "lan1"; - }; - port@1 { - reg = <1>; - label = "lan2"; - }; - port@2 { - reg = <2>; - label = "lan3"; - }; - port@3 { - reg = <3>; - label = "lan4"; - }; - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <ð0>; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml new file mode 100644 index 000000000000..431ca5c498a8 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml @@ -0,0 +1,150 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/microchip,ksz.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip KSZ Series Ethernet switches + +allOf: + - $ref: dsa.yaml# + +maintainers: + - Marek Vasut + - Woojung Huh + +properties: + # See Documentation/devicetree/bindings/net/dsa/dsa.yaml for a list of additional + # required and optional properties. + compatible: + enum: + - "microchip,ksz8765" + - "microchip,ksz8794" + - "microchip,ksz8795" + - "microchip,ksz9477" + - "microchip,ksz9897" + - "microchip,ksz9896" + - "microchip,ksz9567" + - "microchip,ksz8565" + - "microchip,ksz9893" + - "microchip,ksz9563" + - "microchip,ksz8563" + + reset-gpios: + description: + Should be a gpio specifier for a reset line. + maxItems: 1 + + microchip,synclko-125: + $ref: /schemas/types.yaml#/definitions/flag + description: + Set if the output SYNCLKO frequency should be set to 125MHz instead of 25MHz. + +required: + - compatible + - reg + +examples: + - | + #include + + // Ethernet switch connected via SPI to the host, CPU port wired to eth0: + eth0 { + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&pinctrl_spi_ksz>; + cs-gpios = <&pioC 25 0>; + id = <1>; + + ksz9477: switch@0 { + compatible = "microchip,ksz9477"; + reg = <0>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + + spi-max-frequency = <44000000>; + spi-cpha; + spi-cpol; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan1"; + }; + port@1 { + reg = <1>; + label = "lan2"; + }; + port@2 { + reg = <2>; + label = "lan3"; + }; + port@3 { + reg = <3>; + label = "lan4"; + }; + port@4 { + reg = <4>; + label = "lan5"; + }; + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + + ksz8565: switch@1 { + compatible = "microchip,ksz8565"; + reg = <1>; + + spi-max-frequency = <44000000>; + spi-cpha; + spi-cpol; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan1"; + }; + port@1 { + reg = <1>; + label = "lan2"; + }; + port@2 { + reg = <2>; + label = "lan3"; + }; + port@3 { + reg = <3>; + label = "lan4"; + }; + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <ð0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; +... diff --git a/MAINTAINERS b/MAINTAINERS index 1e7d1d71c125..3d173fcbf119 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11518,7 +11518,7 @@ M: Woojung Huh M: Microchip Linux Driver Support L: netdev@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/net/dsa/ksz.txt +F: Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml F: drivers/net/dsa/microchip/* F: include/linux/platform_data/microchip-ksz.h F: net/dsa/tag_ksz.c