diff mbox series

[net-next,v2,06/19] net: phy: mscc: use phy_trigger_machine() to notify link change

Message ID 20201101125114.1316879-7-ciorneiioana@gmail.com
State Accepted
Delegated to: David Miller
Headers show
Series net: phy: add support for shared interrupts (part 1) | expand

Checks

Context Check Description
jkicinski/cover_letter success Link
jkicinski/fixes_present success Link
jkicinski/patch_count fail Series longer than 15 patches
jkicinski/tree_selection success Clearly marked for net-next
jkicinski/subject_prefix success Link
jkicinski/source_inline success Was 0 now: 0
jkicinski/verify_signedoff success Link
jkicinski/module_param success Was 0 now: 0
jkicinski/build_32bit success Errors and warnings before: 0 this patch: 0
jkicinski/kdoc success Errors and warnings before: 0 this patch: 0
jkicinski/verify_fixes success Link
jkicinski/checkpatch success total: 0 errors, 0 warnings, 0 checks, 8 lines checked
jkicinski/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
jkicinski/header_inline success Link
jkicinski/stable success Stable not CCed

Commit Message

Ioana Ciornei Nov. 1, 2020, 12:51 p.m. UTC 
From: Ioana Ciornei <ioana.ciornei@nxp.com>

According to the comment describing the phy_mac_interrupt() function, it
it intended to be used by MAC drivers which have noticed a link change
thus its use in the mscc PHY driver is improper and, most probably, was
added just because phy_trigger_machine() was not exported.
Now that we have acces to trigger the link state machine, use directly
the phy_trigger_machine() function to notify a link change detected by
the PHY driver.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
Changes in v2:
 - none

 drivers/net/phy/mscc/mscc_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Vladimir Oltean Nov. 5, 2020, 12:10 a.m. UTC | #1 
On Sun, Nov 01, 2020 at 02:51:01PM +0200, Ioana Ciornei wrote:
> From: Ioana Ciornei <ioana.ciornei@nxp.com>
> 
> According to the comment describing the phy_mac_interrupt() function, it
> it intended to be used by MAC drivers which have noticed a link change
> thus its use in the mscc PHY driver is improper and, most probably, was
> added just because phy_trigger_machine() was not exported.
> Now that we have acces to trigger the link state machine, use directly
> the phy_trigger_machine() function to notify a link change detected by
> the PHY driver.
> 
> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
> ---

Tested-by: Vladimir Oltean <olteanv@gmail.com>
diff mbox series

Patch

diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c
index 6bc7406a1ce7..b705121c9d26 100644
--- a/drivers/net/phy/mscc/mscc_main.c
+++ b/drivers/net/phy/mscc/mscc_main.c
@@ -1498,7 +1498,7 @@  static irqreturn_t vsc8584_handle_interrupt(struct phy_device *phydev)
 		vsc8584_handle_macsec_interrupt(phydev);
 
 	if (irq_status & MII_VSC85XX_INT_MASK_LINK_CHG)
-		phy_mac_interrupt(phydev);
+		phy_trigger_machine(phydev);
 
 	return IRQ_HANDLED;
 }