diff mbox series

[net-next,v2,10/19] net: phy: aquantia: remove the use of .ack_interrupt()

Message ID 20201101125114.1316879-11-ciorneiioana@gmail.com
State Accepted
Delegated to: David Miller
Headers show
Series net: phy: add support for shared interrupts (part 1) | expand

Checks

Context Check Description
jkicinski/cover_letter success Link
jkicinski/fixes_present success Link
jkicinski/patch_count fail Series longer than 15 patches
jkicinski/tree_selection success Clearly marked for net-next
jkicinski/subject_prefix success Link
jkicinski/source_inline success Was 0 now: 0
jkicinski/verify_signedoff success Link
jkicinski/module_param success Was 0 now: 0
jkicinski/build_32bit success Errors and warnings before: 0 this patch: 0
jkicinski/kdoc success Errors and warnings before: 0 this patch: 0
jkicinski/verify_fixes success Link
jkicinski/checkpatch warning WARNING: line length of 85 exceeds 80 columns
jkicinski/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
jkicinski/header_inline success Link
jkicinski/stable success Stable not CCed

Commit Message

Ioana Ciornei Nov. 1, 2020, 12:51 p.m. UTC 
From: Ioana Ciornei <ioana.ciornei@nxp.com>

In preparation of removing the .ack_interrupt() callback, we must replace
its occurrences (aka phy_clear_interrupt), from the 2 places where it is
called from (phy_enable_interrupts and phy_disable_interrupts), with
equivalent functionality.

This means that clearing interrupts now becomes something that the PHY
driver is responsible of doing, before enabling interrupts and after
clearing them. Make this driver follow the new contract.

Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
Changes in v2:
 - none

 drivers/net/phy/aquantia_main.c | 36 +++++++++++++++++----------------
 1 file changed, 19 insertions(+), 17 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/aquantia_main.c b/drivers/net/phy/aquantia_main.c
index 17b33f0cb179..345f70f9d39b 100644
--- a/drivers/net/phy/aquantia_main.c
+++ b/drivers/net/phy/aquantia_main.c
@@ -247,6 +247,13 @@  static int aqr_config_intr(struct phy_device *phydev)
 	bool en = phydev->interrupts == PHY_INTERRUPT_ENABLED;
 	int err;
 
+	if (en) {
+		/* Clear any pending interrupts before enabling them */
+		err = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_INT_STATUS2);
+		if (err)
+			return err;
+	}
+
 	err = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_INT_MASK2,
 			    en ? MDIO_AN_TX_VEND_INT_MASK2_LINK : 0);
 	if (err < 0)
@@ -257,18 +264,20 @@  static int aqr_config_intr(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
-	return phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_INT_VEND_MASK,
-			     en ? VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3 |
-			     VEND1_GLOBAL_INT_VEND_MASK_AN : 0);
-}
+	err = phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_INT_VEND_MASK,
+			    en ? VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3 |
+			    VEND1_GLOBAL_INT_VEND_MASK_AN : 0);
+	if (err < 0)
+		return err;
 
-static int aqr_ack_interrupt(struct phy_device *phydev)
-{
-	int reg;
+	if (!en) {
+		/* Clear any pending interrupts after we have disabled them */
+		err = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_INT_STATUS2);
+		if (err)
+			return err;
+	}
 
-	reg = phy_read_mmd(phydev, MDIO_MMD_AN,
-			   MDIO_AN_TX_VEND_INT_STATUS2);
-	return (reg < 0) ? reg : 0;
+	return 0;
 }
 
 static irqreturn_t aqr_handle_interrupt(struct phy_device *phydev)
@@ -604,7 +613,6 @@  static struct phy_driver aqr_driver[] = {
 	.name		= "Aquantia AQ1202",
 	.config_aneg    = aqr_config_aneg,
 	.config_intr	= aqr_config_intr,
-	.ack_interrupt	= aqr_ack_interrupt,
 	.handle_interrupt = aqr_handle_interrupt,
 	.read_status	= aqr_read_status,
 },
@@ -613,7 +621,6 @@  static struct phy_driver aqr_driver[] = {
 	.name		= "Aquantia AQ2104",
 	.config_aneg    = aqr_config_aneg,
 	.config_intr	= aqr_config_intr,
-	.ack_interrupt	= aqr_ack_interrupt,
 	.handle_interrupt = aqr_handle_interrupt,
 	.read_status	= aqr_read_status,
 },
@@ -622,7 +629,6 @@  static struct phy_driver aqr_driver[] = {
 	.name		= "Aquantia AQR105",
 	.config_aneg    = aqr_config_aneg,
 	.config_intr	= aqr_config_intr,
-	.ack_interrupt	= aqr_ack_interrupt,
 	.handle_interrupt = aqr_handle_interrupt,
 	.read_status	= aqr_read_status,
 	.suspend	= aqr107_suspend,
@@ -633,7 +639,6 @@  static struct phy_driver aqr_driver[] = {
 	.name		= "Aquantia AQR106",
 	.config_aneg    = aqr_config_aneg,
 	.config_intr	= aqr_config_intr,
-	.ack_interrupt	= aqr_ack_interrupt,
 	.handle_interrupt = aqr_handle_interrupt,
 	.read_status	= aqr_read_status,
 },
@@ -644,7 +649,6 @@  static struct phy_driver aqr_driver[] = {
 	.config_init	= aqr107_config_init,
 	.config_aneg    = aqr_config_aneg,
 	.config_intr	= aqr_config_intr,
-	.ack_interrupt	= aqr_ack_interrupt,
 	.handle_interrupt = aqr_handle_interrupt,
 	.read_status	= aqr107_read_status,
 	.get_tunable    = aqr107_get_tunable,
@@ -663,7 +667,6 @@  static struct phy_driver aqr_driver[] = {
 	.config_init	= aqcs109_config_init,
 	.config_aneg    = aqr_config_aneg,
 	.config_intr	= aqr_config_intr,
-	.ack_interrupt	= aqr_ack_interrupt,
 	.handle_interrupt = aqr_handle_interrupt,
 	.read_status	= aqr107_read_status,
 	.get_tunable    = aqr107_get_tunable,
@@ -680,7 +683,6 @@  static struct phy_driver aqr_driver[] = {
 	.name		= "Aquantia AQR405",
 	.config_aneg    = aqr_config_aneg,
 	.config_intr	= aqr_config_intr,
-	.ack_interrupt	= aqr_ack_interrupt,
 	.handle_interrupt = aqr_handle_interrupt,
 	.read_status	= aqr_read_status,
 },