diff mbox series

[08/38] can: softing: update dead link

Message ID	20200921134557.2251383-9-mkl@pengutronix.de
State	Awaiting Upstream
Delegated to:	David Miller
Headers	show Return-Path: <netdev-owner@vger.kernel.org> From: Marc Kleine-Budde <mkl@pengutronix.de> To: netdev@vger.kernel.org Cc: davem@davemloft.net, linux-can@vger.kernel.org, kernel@pengutronix.de, =?utf-8?q?Diego_Elio_Petten=C3=B2?= <flameeyes@flameeyes.com>, Marc Kleine-Budde <mkl@pengutronix.de> Subject: [PATCH 08/38] can: softing: update dead link Date: Mon, 21 Sep 2020 15:45:27 +0200 Message-Id: <20200921134557.2251383-9-mkl@pengutronix.de> In-Reply-To: <20200921134557.2251383-1-mkl@pengutronix.de> References: <20200921134557.2251383-1-mkl@pengutronix.de> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	[01/38] can: grcan: fix spelling mistake "buss" -> "bus" \| expand [01/38] can: grcan: fix spelling mistake "buss" -> "bus" [02/38] can: flexcan: fix spelling mistake "reserverd" -> "reserved" [03/38] can: include: fix spelling mistakes [04/38] can: net: fix spelling mistakes [05/38] can: drivers: fix spelling mistakes [06/38] can: raw: fix indention [07/38] can: slcan: update dead link [08/38] can: softing: update dead link [09/38] can: remove "WITH Linux-syscall-note" from SPDX tag of C files [10/38] can: dev: can_put_echo_skb(): print number of echo_skb that is occupied [11/38] can: dev: can_put_echo_skb(): propagate error in case of errors [12/38] can: dev: can_change_state(): print human readable state change messages [13/38] can: dev: can_bus_off(): print scheduling of restart if activated [14/38] can: c_can: Remove unused inline function [15/38] can: mcba_usb: remove redundant initialization of variable err [16/38] can: mscan: mark expected switch fall-through [17/38] can: ti_hecc: convert to devm_platform_ioremap_resource_byname() [18/38] can: peak_usb: convert to use le32_add_cpu() [19/38] can: peak_canfd: Remove unused macros [20/38] can: pch_can: use generic power management [21/38] can: pcan_usb: Document the commands sent to the device [22/38] can: pcan_usb: add support of rxerr/txerr counters [23/38] can: spi: Kconfig: remove unneeded dependencies form Kconfig symbols [24/38] dt-bindings: can: mcp251x: change example interrupt type to IRQ_TYPE_LEVEL_LOW [25/38] dt-bindings: can: mcp251x: document GPIO support [26/38] can: mcp251x: sort include files alphabetically [27/38] can: mcp251x: add GPIO support [28/38] can: mcp251x: Use readx_poll_timeout() helper [29/38] can: mcp251x: add support for half duplex controllers [30/38] can: mscan: mpc5xxx_can: update contact email [31/38] can: mscan: simplify clock enable/disable [32/38] can: rx-offload: can_rx_offload_add_manual(): add new initialization function [33/38] dt-binding: can: mcp25xxfd: document device tree bindings [34/38] can: mcp25xxfd: add regmap infrastructure [35/38] can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN [36/38] can: mcp25xxfd: add listen-only mode [37/38] MAINTAINERS: Add entry for Microchip MCP25XXFD SPI-CAN network driver [38/38] MAINTAINERS: Add reviewer entry for microchip mcp25xxfd SPI-CAN network driver

Commit Message

Marc Kleine-Budde Sept. 21, 2020, 1:45 p.m. UTC

From: Diego Elio Pettenò <flameeyes@flameeyes.com>

BerliOS has not been operating for more than five years. linux-can moved to
GitHub.

Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com>
Link: https://lore.kernel.org/r/20200413170241.13207-1-flameeyes@flameeyes.com
[mkl: split into two patches - handle softing part here]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/softing/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff mbox series

Patch

diff --git a/drivers/net/can/softing/Kconfig b/drivers/net/can/softing/Kconfig
index 9edc73b13014..8afd7d0a1000 100644
--- a/drivers/net/can/softing/Kconfig
+++ b/drivers/net/can/softing/Kconfig
@@ -24,7 +24,7 @@  config CAN_SOFTING_CS
 	  Support for PCMCIA cards from Softing Gmbh & some cards
 	  from Vector Gmbh.
 	  You need firmware for these, which you can get at
-	  http://developer.berlios.de/projects/socketcan/
+	  https://github.com/linux-can/can-firmware
 	  This version of the driver is written against
 	  firmware version 4.6 (softing-fw-4.6-binaries.tar.gz)
 	  In order to use the card as CAN device, you need the Softing generic