diff mbox series

[v2,net-next,5/9] net: dsa: refuse configuration in prepare phase of dsa_port_vlan_filtering()

Message ID 20200921001031.3650456-6-vladimir.oltean@nxp.com
State Accepted
Delegated to: David Miller
Headers show
Series DSA with VLAN filtering and offloading masters | expand

Commit Message

Vladimir Oltean Sept. 21, 2020, 12:10 a.m. UTC 
The current logic beats me a little bit. The comment that "bridge skips
-EOPNOTSUPP, so skip the prepare phase" was introduced in commit
fb2dabad69f0 ("net: dsa: support VLAN filtering switchdev attr").

I'm not sure:
(a) ok, the bridge skips -EOPNOTSUPP, but, so what, where are we
    returning -EOPNOTSUPP?
(b) even if we are, and I'm just not seeing it, what is the causality
    relationship between the bridge skipping -EOPNOTSUPP and DSA
    skipping the prepare phase, and just returning zero?

One thing is certain beyond doubt though, and that is that DSA currently
refuses VLAN filtering from the "commit" phase instead of "prepare", and
that this is not a good thing:

ip link add br0 type bridge
ip link add br1 type bridge vlan_filtering 1
ip link set swp2 master br0
ip link set swp3 master br1
[ 3790.379389] 001: sja1105 spi0.1: VLAN filtering is a global setting
[ 3790.379399] 001: ------------[ cut here ]------------
[ 3790.379403] 001: WARNING: CPU: 1 PID: 515 at net/switchdev/switchdev.c:157 switchdev_port_attr_set_now+0x9c/0xa4
[ 3790.379420] 001: swp3: Commit of attribute (id=6) failed.
[ 3790.379533] 001: [<c11ff588>] (switchdev_port_attr_set_now) from [<c11b62e4>] (nbp_vlan_init+0x84/0x148)
[ 3790.379544] 001: [<c11b62e4>] (nbp_vlan_init) from [<c11a2ff0>] (br_add_if+0x514/0x670)
[ 3790.379554] 001: [<c11a2ff0>] (br_add_if) from [<c1031b5c>] (do_setlink+0x38c/0xab0)
[ 3790.379565] 001: [<c1031b5c>] (do_setlink) from [<c1036fe8>] (__rtnl_newlink+0x44c/0x748)
[ 3790.379573] 001: [<c1036fe8>] (__rtnl_newlink) from [<c1037328>] (rtnl_newlink+0x44/0x60)
[ 3790.379580] 001: [<c1037328>] (rtnl_newlink) from [<c10315fc>] (rtnetlink_rcv_msg+0x124/0x2f8)
[ 3790.379590] 001: [<c10315fc>] (rtnetlink_rcv_msg) from [<c10926b8>] (netlink_rcv_skb+0xb8/0x110)
[ 3790.379806] 001: ---[ end trace 0000000000000002 ]---
[ 3790.379819] 001: sja1105 spi0.1 swp3: failed to initialize vlan filtering on this port

So move the current logic that may fail (except ds->ops->port_vlan_filtering,
that is way harder) into the prepare stage of the switchdev transaction.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
Changes in v2:
None.

 net/dsa/port.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/net/dsa/port.c b/net/dsa/port.c
index 46c9bf709683..794a03718838 100644
--- a/net/dsa/port.c
+++ b/net/dsa/port.c
@@ -232,15 +232,15 @@  int dsa_port_vlan_filtering(struct dsa_port *dp, bool vlan_filtering,
 	struct dsa_switch *ds = dp->ds;
 	int err;
 
-	/* bridge skips -EOPNOTSUPP, so skip the prepare phase */
-	if (switchdev_trans_ph_prepare(trans))
-		return 0;
+	if (switchdev_trans_ph_prepare(trans)) {
+		if (!ds->ops->port_vlan_filtering)
+			return -EOPNOTSUPP;
 
-	if (!ds->ops->port_vlan_filtering)
-		return 0;
+		if (!dsa_port_can_apply_vlan_filtering(dp, vlan_filtering))
+			return -EINVAL;
 
-	if (!dsa_port_can_apply_vlan_filtering(dp, vlan_filtering))
-		return -EINVAL;
+		return 0;
+	}
 
 	if (dsa_port_is_vlan_filtering(dp) == vlan_filtering)
 		return 0;