diff mbox series

[net/next] r8152: Use MAC address from device tree if available

Message ID 20200514123848.933199-1-thierry.reding@gmail.com
State Accepted
Delegated to: David Miller
Headers show
Series [net/next] r8152: Use MAC address from device tree if available | expand

Commit Message

Thierry Reding May 14, 2020, 12:38 p.m. UTC 
From: Thierry Reding <treding@nvidia.com>

If a MAC address was passed via the device tree node for the r8152
device, use it and fall back to reading from EEPROM otherwise. This is
useful for devices where the r8152 EEPROM was not programmed with a
valid MAC address, or if users want to explicitly set a MAC address in
the bootloader and pass that to the kernel.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 drivers/net/usb/r8152.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

Comments

David Miller May 14, 2020, 8:16 p.m. UTC | #1 
From: Thierry Reding <thierry.reding@gmail.com>
Date: Thu, 14 May 2020 14:38:48 +0200

> From: Thierry Reding <treding@nvidia.com>
> 
> If a MAC address was passed via the device tree node for the r8152
> device, use it and fall back to reading from EEPROM otherwise. This is
> useful for devices where the r8152 EEPROM was not programmed with a
> valid MAC address, or if users want to explicitly set a MAC address in
> the bootloader and pass that to the kernel.
> 
> Signed-off-by: Thierry Reding <treding@nvidia.com>

Yep, that looks good, applied.

Thank you.
diff mbox series

Patch

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 8f8d9883d363..1af72ec284ca 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1504,15 +1504,19 @@  static int determine_ethernet_addr(struct r8152 *tp, struct sockaddr *sa)
 
 	sa->sa_family = dev->type;
 
-	if (tp->version == RTL_VER_01) {
-		ret = pla_ocp_read(tp, PLA_IDR, 8, sa->sa_data);
-	} else {
-		/* if device doesn't support MAC pass through this will
-		 * be expected to be non-zero
-		 */
-		ret = vendor_mac_passthru_addr_read(tp, sa);
-		if (ret < 0)
-			ret = pla_ocp_read(tp, PLA_BACKUP, 8, sa->sa_data);
+	ret = eth_platform_get_mac_address(&dev->dev, sa->sa_data);
+	if (ret < 0) {
+		if (tp->version == RTL_VER_01) {
+			ret = pla_ocp_read(tp, PLA_IDR, 8, sa->sa_data);
+		} else {
+			/* if device doesn't support MAC pass through this will
+			 * be expected to be non-zero
+			 */
+			ret = vendor_mac_passthru_addr_read(tp, sa);
+			if (ret < 0)
+				ret = pla_ocp_read(tp, PLA_BACKUP, 8,
+						   sa->sa_data);
+		}
 	}
 
 	if (ret < 0) {