Message ID | 20200418005126.15305-1-f.fainelli@gmail.com |
---|---|
State | Superseded |
Delegated to: | David Miller |
Headers | show |
Series | [net-next] dt-bindings: net: mdio: Document common properties | expand |
On Fri, Apr 17, 2020 at 05:51:26PM -0700, Florian Fainelli wrote: > Some of the properties pertaining to the broken turn around or resets > were only documented in ethernet-phy.yaml while they are applicable > across all MDIO devices and not Ethernet PHYs specifically which are a > superset. > > Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> > --- > .../devicetree/bindings/net/mdio.yaml | 27 +++++++++++++++++++ > 1 file changed, 27 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml > index 50c3397a82bc..58d486db5651 100644 > --- a/Documentation/devicetree/bindings/net/mdio.yaml > +++ b/Documentation/devicetree/bindings/net/mdio.yaml > @@ -50,6 +50,33 @@ patternProperties: > description: > The ID number for the PHY. > > + broken-turn-around: > + $ref: /schemas/types.yaml#definitions/flag > + description: > + If set, indicates the PHY device does not correctly release > + the turn around line low at the end of a MDIO transaction. Hi Florian Since this is a generic property, maybe this should be "the MDIO device"? Probably the whole document needs s/PHY/MDIO/g ? Andrew
diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml index 50c3397a82bc..58d486db5651 100644 --- a/Documentation/devicetree/bindings/net/mdio.yaml +++ b/Documentation/devicetree/bindings/net/mdio.yaml @@ -50,6 +50,33 @@ patternProperties: description: The ID number for the PHY. + broken-turn-around: + $ref: /schemas/types.yaml#definitions/flag + description: + If set, indicates the PHY device does not correctly release + the turn around line low at the end of a MDIO transaction. + + resets: + maxItems: 1 + + reset-names: + const: phy + + reset-gpios: + maxItems: 1 + description: + The GPIO phandle and specifier for the PHY reset signal. + + reset-assert-us: + description: + Delay after the reset was asserted in microseconds. If this + property is missing the delay will be skipped. + + reset-deassert-us: + description: + Delay after the reset was deasserted in microseconds. If + this property is missing the delay will be skipped. + required: - reg
Some of the properties pertaining to the broken turn around or resets were only documented in ethernet-phy.yaml while they are applicable across all MDIO devices and not Ethernet PHYs specifically which are a superset. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- .../devicetree/bindings/net/mdio.yaml | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+)