diff mbox series

[net] net: systemport: Avoid RBUF stuck in Wake-on-LAN mode

Message ID 20200205203204.14511-1-f.fainelli@gmail.com
State Accepted
Delegated to: David Miller
Headers show
Series [net] net: systemport: Avoid RBUF stuck in Wake-on-LAN mode | expand

Commit Message

Florian Fainelli Feb. 5, 2020, 8:32 p.m. UTC
After a number of suspend and resume cycles, it is possible for the RBUF
to be stuck in Wake-on-LAN mode, despite the MPD enable bit being
cleared which instructed the RBUF to exit that mode.

Avoid creating that problematic condition by clearing the RX_EN and
TX_EN bits in the UniMAC prior to disable the Magic Packet Detector
logic which is guaranteed to make the RBUF exit Wake-on-LAN mode.

Fixes: 83e82f4c706b ("net: systemport: add Wake-on-LAN support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/ethernet/broadcom/bcmsysport.c | 3 +++
 1 file changed, 3 insertions(+)

Comments

David Miller Feb. 6, 2020, 1:29 p.m. UTC | #1
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Wed,  5 Feb 2020 12:32:04 -0800

> After a number of suspend and resume cycles, it is possible for the RBUF
> to be stuck in Wake-on-LAN mode, despite the MPD enable bit being
> cleared which instructed the RBUF to exit that mode.

Must be some weird state latching or something like that...

> Avoid creating that problematic condition by clearing the RX_EN and
> TX_EN bits in the UniMAC prior to disable the Magic Packet Detector
> logic which is guaranteed to make the RBUF exit Wake-on-LAN mode.
> 
> Fixes: 83e82f4c706b ("net: systemport: add Wake-on-LAN support")
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Applied and queued up for -stable, thanks.
diff mbox series

Patch

diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index f07ac0e0af59..e0611cba87f9 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -2736,6 +2736,9 @@  static int __maybe_unused bcm_sysport_resume(struct device *d)
 
 	umac_reset(priv);
 
+	/* Disable the UniMAC RX/TX */
+	umac_enable_set(priv, CMD_RX_EN | CMD_TX_EN, 0);
+
 	/* We may have been suspended and never received a WOL event that
 	 * would turn off MPD detection, take care of that now
 	 */