diff --git a/Documentation/ioctl/ioctl-number.rst b/Documentation/ioctl/ioctl-number.rst
index bef79cd4c6b4..178d499fcded 100644
--- a/Documentation/ioctl/ioctl-number.rst
+++ b/Documentation/ioctl/ioctl-number.rst
@@ -132,7 +132,6 @@ Code  Seq#    Include File                                           Comments
 'F'   80-8F  linux/arcfb.h                                           conflict!
 'F'   DD     video/sstfb.h                                           conflict!
 'G'   00-3F  drivers/misc/sgi-gru/grulib.h                           conflict!
-'G'   00-0F  linux/gigaset_dev.h                                     conflict!
 'H'   00-7F  linux/hiddev.h                                          conflict!
 'H'   00-0F  linux/hidraw.h                                          conflict!
 'H'   01     linux/mei.h                                             conflict!
diff --git a/Documentation/isdn/avmb1.rst b/Documentation/isdn/avmb1.rst
deleted file mode 100644
index de3961e67553..000000000000
--- a/Documentation/isdn/avmb1.rst
+++ /dev/null
@@ -1,246 +0,0 @@
-================================
-Driver for active AVM Controller
-================================
-
-The driver provides a kernel capi2.0 Interface (kernelcapi) and
-on top of this a User-Level-CAPI2.0-interface (capi)
-and a driver to connect isdn4linux with CAPI2.0 (capidrv).
-The lowlevel interface can be used to implement a CAPI2.0
-also for passive cards since July 1999.
-
-The author can be reached at calle@calle.in-berlin.de.
-The command avmcapictrl is part of the isdn4k-utils.
-t4-files can be found at ftp://ftp.avm.de/cardware/b1/linux/firmware
-
-Currently supported cards:
-
-	- B1 ISA (all versions)
-	- B1 PCI
-	- T1/T1B (HEMA card)
-	- M1
-	- M2
-	- B1 PCMCIA
-
-Installing
-----------
-
-You need at least /dev/capi20 to load the firmware.
-
-::
-
-    mknod /dev/capi20 c 68 0
-    mknod /dev/capi20.00 c 68 1
-    mknod /dev/capi20.01 c 68 2
-    .
-    .
-    .
-    mknod /dev/capi20.19 c 68 20
-
-Running
--------
-
-To use the card you need the t4-files to download the firmware.
-AVM GmbH provides several t4-files for the different D-channel
-protocols (b1.t4 for Euro-ISDN). Install these file in /lib/isdn.
-
-if you configure as modules load the modules this way::
-
-    insmod /lib/modules/current/misc/capiutil.o
-    insmod /lib/modules/current/misc/b1.o
-    insmod /lib/modules/current/misc/kernelcapi.o
-    insmod /lib/modules/current/misc/capidrv.o
-    insmod /lib/modules/current/misc/capi.o
-
-if you have an B1-PCI card load the module b1pci.o::
-
-    insmod /lib/modules/current/misc/b1pci.o
-
-and load the firmware with::
-
-    avmcapictrl load /lib/isdn/b1.t4 1
-
-if you have an B1-ISA card load the module b1isa.o
-and add the card by calling::
-
-    avmcapictrl add 0x150 15
-
-and load the firmware by calling::
-
-    avmcapictrl load /lib/isdn/b1.t4 1
-
-if you have an T1-ISA card load the module t1isa.o
-and add the card by calling::
-
-    avmcapictrl add 0x450 15 T1 0
-
-and load the firmware by calling::
-
-    avmcapictrl load /lib/isdn/t1.t4 1
-
-if you have an PCMCIA card (B1/M1/M2) load the module b1pcmcia.o
-before you insert the card.
-
-Leased Lines with B1
---------------------
-
-Init card and load firmware.
-
-For an D64S use "FV: 1" as phone number
-
-For an D64S2 use "FV: 1" and "FV: 2" for multilink
-or "FV: 1,2" to use CAPI channel bundling.
-
-/proc-Interface
------------------
-
-/proc/capi::
-
-  dr-xr-xr-x   2 root     root            0 Jul  1 14:03 .
-  dr-xr-xr-x  82 root     root            0 Jun 30 19:08 ..
-  -r--r--r--   1 root     root            0 Jul  1 14:03 applications
-  -r--r--r--   1 root     root            0 Jul  1 14:03 applstats
-  -r--r--r--   1 root     root            0 Jul  1 14:03 capi20
-  -r--r--r--   1 root     root            0 Jul  1 14:03 capidrv
-  -r--r--r--   1 root     root            0 Jul  1 14:03 controller
-  -r--r--r--   1 root     root            0 Jul  1 14:03 contrstats
-  -r--r--r--   1 root     root            0 Jul  1 14:03 driver
-  -r--r--r--   1 root     root            0 Jul  1 14:03 ncci
-  -r--r--r--   1 root     root            0 Jul  1 14:03 users
-
-/proc/capi/applications:
-   applid level3cnt datablkcnt datablklen ncci-cnt recvqueuelen
-	level3cnt:
-	    capi_register parameter
-	datablkcnt:
-	    capi_register parameter
-	ncci-cnt:
-	    current number of nccis (connections)
-	recvqueuelen:
-	    number of messages on receive queue
-
-   for example::
-
-	1 -2 16 2048 1 0
-	2 2 7 2048 1 0
-
-/proc/capi/applstats:
-   applid recvctlmsg nrecvdatamsg nsentctlmsg nsentdatamsg
-	recvctlmsg:
-	    capi messages received without DATA_B3_IND
-	recvdatamsg:
-	    capi DATA_B3_IND received
-	sentctlmsg:
-	    capi messages sent without DATA_B3_REQ
-	sentdatamsg:
-	    capi DATA_B3_REQ sent
-
-   for example::
-
-	1 2057 1699 1721 1699
-
-/proc/capi/capi20: statistics of capi.o (/dev/capi20)
-    minor nopen nrecvdropmsg nrecvctlmsg nrecvdatamsg sentctlmsg sentdatamsg
-	minor:
-	    minor device number of capi device
-	nopen:
-	    number of calls to devices open
-	nrecvdropmsg:
-	    capi messages dropped (messages in recvqueue in close)
-	nrecvctlmsg:
-	    capi messages received without DATA_B3_IND
-	nrecvdatamsg:
-	    capi DATA_B3_IND received
-	nsentctlmsg:
-	    capi messages sent without DATA_B3_REQ
-	nsentdatamsg:
-	    capi DATA_B3_REQ sent
-
-   for example::
-
-	1 2 18 0 16 2
-
-/proc/capi/capidrv: statistics of capidrv.o (capi messages)
-    nrecvctlmsg nrecvdatamsg sentctlmsg sentdatamsg
-	nrecvctlmsg:
-	    capi messages received without DATA_B3_IND
-	nrecvdatamsg:
-	    capi DATA_B3_IND received
-	nsentctlmsg:
-	    capi messages sent without DATA_B3_REQ
-	nsentdatamsg:
-	    capi DATA_B3_REQ sent
-
-   for example:
-	2780 2226 2256 2226
-
-/proc/capi/controller:
-   controller drivername state cardname   controllerinfo
-
-   for example::
-
-	1 b1pci      running  b1pci-e000       B1 3.07-01 0xe000 19
-	2 t1isa      running  t1isa-450        B1 3.07-01 0x450 11 0
-	3 b1pcmcia   running  m2-150           B1 3.07-01 0x150 5
-
-/proc/capi/contrstats:
-    controller nrecvctlmsg nrecvdatamsg sentctlmsg sentdatamsg
-	nrecvctlmsg:
-	    capi messages received without DATA_B3_IND
-	nrecvdatamsg:
-	    capi DATA_B3_IND received
-	nsentctlmsg:
-	    capi messages sent without DATA_B3_REQ
-	nsentdatamsg:
-	    capi DATA_B3_REQ sent
-
-   for example::
-
-	1 2845 2272 2310 2274
-	2 2 0 2 0
-	3 2 0 2 0
-
-/proc/capi/driver:
-   drivername ncontroller
-
-   for example::
-
-	b1pci                            1
-	t1isa                            1
-	b1pcmcia                         1
-	b1isa                            0
-
-/proc/capi/ncci:
-   apllid ncci winsize sendwindow
-
-   for example::
-
-	1 0x10101 8 0
-
-/proc/capi/users: kernelmodules that use the kernelcapi.
-   name
-
-   for example::
-
-	capidrv
-	capi20
-
-Questions
----------
-
-Check out the FAQ (ftp.isdn4linux.de) or subscribe to the
-linux-avmb1@calle.in-berlin.de mailing list by sending
-a mail to majordomo@calle.in-berlin.de with
-subscribe linux-avmb1
-in the body.
-
-German documentation and several scripts can be found at
-ftp://ftp.avm.de/cardware/b1/linux/
-
-Bugs
-----
-
-If you find any please let me know.
-
-Enjoy,
-
-Carsten Paeth (calle@calle.in-berlin.de)
diff --git a/Documentation/isdn/gigaset.rst b/Documentation/isdn/gigaset.rst
deleted file mode 100644
index 98b4ec521c51..000000000000
--- a/Documentation/isdn/gigaset.rst
+++ /dev/null
@@ -1,465 +0,0 @@
-==========================
-GigaSet 307x Device Driver
-==========================
-
-1.   Requirements
-=================
-
-1.1. Hardware
--------------
-
-     This driver supports the connection of the Gigaset 307x/417x family of
-     ISDN DECT bases via Gigaset M101 Data, Gigaset M105 Data or direct USB
-     connection. The following devices are reported to be compatible:
-
-     Bases:
-       - Siemens Gigaset 3070/3075 isdn
-       - Siemens Gigaset 4170/4175 isdn
-       - Siemens Gigaset SX205/255
-       - Siemens Gigaset SX353
-       - T-Com Sinus 45 [AB] isdn
-       - T-Com Sinus 721X[A] [SE]
-       - Vox Chicago 390 ISDN (KPN Telecom)
-
-     RS232 data boxes:
-       - Siemens Gigaset M101 Data
-       - T-Com Sinus 45 Data 1
-
-     USB data boxes:
-       - Siemens Gigaset M105 Data
-       - Siemens Gigaset USB Adapter DECT
-       - T-Com Sinus 45 Data 2
-       - T-Com Sinus 721 data
-       - Chicago 390 USB (KPN)
-
-     See also http://www.erbze.info/sinus_gigaset.htm
-       (archived at https://web.archive.org/web/20100717020421/http://www.erbze.info:80/sinus_gigaset.htm ) and
-	http://gigaset307x.sourceforge.net/
-
-     We had also reports from users of Gigaset M105 who could use the drivers
-     with SX 100 and CX 100 ISDN bases (only in unimodem mode, see section 2.5.)
-     If you have another device that works with our driver, please let us know.
-
-     Chances of getting an USB device to work are good if the output of::
-
-	lsusb
-
-     at the command line contains one of the following::
-
-	ID 0681:0001
-	ID 0681:0002
-	ID 0681:0009
-	ID 0681:0021
-	ID 0681:0022
-
-1.2. Software
--------------
-
-     The driver works with the Kernel CAPI subsystem and can be used with any
-     software which is able to use CAPI 2.0 for ISDN connections (voice or data).
-
-     There are some user space tools available at
-     https://sourceforge.net/projects/gigaset307x/
-     which provide access to additional device specific functions like SMS,
-     phonebook or call journal.
-
-
-2.   How to use the driver
-==========================
-
-2.1. Modules
-------------
-
-     For the devices to work, the proper kernel modules have to be loaded.
-     This normally happens automatically when the system detects the USB
-     device (base, M105) or when the line discipline is attached (M101). It
-     can also be triggered manually using the modprobe(8) command, for example
-     for troubleshooting or to pass module parameters.
-
-     The module ser_gigaset provides a serial line discipline N_GIGASET_M101
-     which uses the regular serial port driver to access the device, and must
-     therefore be attached to the serial device to which the M101 is connected.
-     The ldattach(8) command (included in util-linux-ng release 2.14 or later)
-     can be used for that purpose, for example::
-
-	ldattach GIGASET_M101 /dev/ttyS1
-
-     This will open the device file, attach the line discipline to it, and
-     then sleep in the background, keeping the device open so that the line
-     discipline remains active. To deactivate it, kill the daemon, for example
-     with::
-
-	killall ldattach
-
-     before disconnecting the device. To have this happen automatically at
-     system startup/shutdown on an LSB compatible system, create and activate
-     an appropriate LSB startup script /etc/init.d/gigaset. (The init name
-     'gigaset' is officially assigned to this project by LANANA.)
-     Alternatively, just add the 'ldattach' command line to /etc/rc.local.
-
-     The modules accept the following parameters:
-
-	=============== ========== ==========================================
-	Module		Parameter  Meaning
-
-	gigaset		debug	   debug level (see section 3.2.)
-
-			startmode  initial operation mode (see section 2.5.):
-	bas_gigaset )		   1=CAPI (default), 0=Unimodem
-	ser_gigaset )
-	usb_gigaset )	cidmode    initial Call-ID mode setting (see section
-				   2.5.): 1=on (default), 0=off
-
-	=============== ========== ==========================================
-
-     Depending on your distribution you may want to create a separate module
-     configuration file like /etc/modprobe.d/gigaset.conf for these.
-
-2.2. Device nodes for user space programs
------------------------------------------
-
-     The device can be accessed from user space (eg. by the user space tools
-     mentioned in 1.2.) through the device nodes:
-
-     - /dev/ttyGS0 for M101 (RS232 data boxes)
-     - /dev/ttyGU0 for M105 (USB data boxes)
-     - /dev/ttyGB0 for the base driver (direct USB connection)
-
-     If you connect more than one device of a type, they will get consecutive
-     device nodes, eg. /dev/ttyGU1 for a second M105.
-
-     You can also set a "default device" for the user space tools to use when
-     no device node is given as parameter, by creating a symlink /dev/ttyG to
-     one of them, eg.::
-
-	ln -s /dev/ttyGB0 /dev/ttyG
-
-     The devices accept the following device specific ioctl calls
-     (defined in gigaset_dev.h):
-
-     ``ioctl(int fd, GIGASET_REDIR, int *cmd);``
-
-     If cmd==1, the device is set to be controlled exclusively through the
-     character device node; access from the ISDN subsystem is blocked.
-
-     If cmd==0, the device is set to be used from the ISDN subsystem and does
-     not communicate through the character device node.
-
-     ``ioctl(int fd, GIGASET_CONFIG, int *cmd);``
-
-     (ser_gigaset and usb_gigaset only)
-
-     If cmd==1, the device is set to adapter configuration mode where commands
-     are interpreted by the M10x DECT adapter itself instead of being
-     forwarded to the base station. In this mode, the device accepts the
-     commands described in Siemens document "AT-Kommando Alignment M10x Data"
-     for setting the operation mode, associating with a base station and
-     querying parameters like field strengh and signal quality.
-
-     Note that there is no ioctl command for leaving adapter configuration
-     mode and returning to regular operation. In order to leave adapter
-     configuration mode, write the command ATO to the device.
-
-     ``ioctl(int fd, GIGASET_BRKCHARS, unsigned char brkchars[6]);``
-
-     (usb_gigaset only)
-
-     Set the break characters on an M105's internal serial adapter to the six
-     bytes stored in brkchars[]. Unused bytes should be set to zero.
-
-     ioctl(int fd, GIGASET_VERSION, unsigned version[4]);
-     Retrieve version information from the driver. version[0] must be set to
-     one of:
-
-     - GIGVER_DRIVER: retrieve driver version
-     - GIGVER_COMPAT: retrieve interface compatibility version
-     - GIGVER_FWBASE: retrieve the firmware version of the base
-
-     Upon return, version[] is filled with the requested version information.
-
-2.3. CAPI
----------
-
-     The devices will show up as CAPI controllers as soon as the
-     corresponding driver module is loaded, and can then be used with
-     CAPI 2.0 kernel and user space applications. For user space access,
-     the module capi.ko must be loaded.
-
-     Most distributions handle loading and unloading of the various CAPI
-     modules automatically via the command capiinit(1) from the capi4k-utils
-     package or a similar mechanism. Note that capiinit(1) cannot unload the
-     Gigaset drivers because it doesn't support more than one module per
-     driver.
-
-2.5. Unimodem mode
-------------------
-
-     In this mode the device works like a modem connected to a serial port
-     (the /dev/ttyGU0, ... mentioned above) which understands the commands::
-
-	 ATZ                 init, reset
-	     => OK or ERROR
-	 ATD
-	 ATDT                dial
-	     => OK, CONNECT,
-		BUSY,
-		NO DIAL TONE,
-		NO CARRIER,
-		NO ANSWER
-	 <pause>+++<pause>   change to command mode when connected
-	 ATH                 hangup
-
-     You can use some configuration tool of your distribution to configure this
-     "modem" or configure pppd/wvdial manually. There are some example ppp
-     configuration files and chat scripts in the gigaset-VERSION/ppp directory
-     in the driver packages from https://sourceforge.net/projects/gigaset307x/.
-     Please note that the USB drivers are not able to change the state of the
-     control lines. This means you must use "Stupid Mode" if you are using
-     wvdial or you should use the nocrtscts option of pppd.
-     You must also assure that the ppp_async module is loaded with the parameter
-     flag_time=0. You can do this e.g. by adding a line like::
-
-	options ppp_async flag_time=0
-
-     to an appropriate module configuration file, like::
-
-	/etc/modprobe.d/gigaset.conf.
-
-     Unimodem mode is needed for making some devices [e.g. SX100] work which
-     do not support the regular Gigaset command set. If debug output (see
-     section 3.2.) shows something like this when dialing::
-
-	 CMD Received: ERROR
-	 Available Params: 0
-	 Connection State: 0, Response: -1
-	 gigaset_process_response: resp_code -1 in ConState 0 !
-	 Timeout occurred
-
-     then switching to unimodem mode may help.
-
-     If you have installed the command line tool gigacontr, you can enter
-     unimodem mode using::
-
-	 gigacontr --mode unimodem
-
-     You can switch back using::
-
-	 gigacontr --mode isdn
-
-     You can also put the driver directly into Unimodem mode when it's loaded,
-     by passing the module parameter startmode=0 to the hardware specific
-     module, e.g.::
-
-	modprobe usb_gigaset startmode=0
-
-     or by adding a line like::
-
-	options usb_gigaset startmode=0
-
-     to an appropriate module configuration file, like::
-
-	/etc/modprobe.d/gigaset.conf
-
-2.6. Call-ID (CID) mode
------------------------
-
-     Call-IDs are numbers used to tag commands to, and responses from, the
-     Gigaset base in order to support the simultaneous handling of multiple
-     ISDN calls. Their use can be enabled ("CID mode") or disabled ("Unimodem
-     mode"). Without Call-IDs (in Unimodem mode), only a very limited set of
-     functions is available. It allows outgoing data connections only, but
-     does not signal incoming calls or other base events.
-
-     DECT cordless data devices (M10x) permanently occupy the cordless
-     connection to the base while Call-IDs are activated. As the Gigaset
-     bases only support one DECT data connection at a time, this prevents
-     other DECT cordless data devices from accessing the base.
-
-     During active operation, the driver switches to the necessary mode
-     automatically. However, for the reasons above, the mode chosen when
-     the device is not in use (idle) can be selected by the user.
-
-     - If you want to receive incoming calls, you can use the default
-       settings (CID mode).
-     - If you have several DECT data devices (M10x) which you want to use
-       in turn, select Unimodem mode by passing the parameter "cidmode=0" to
-       the appropriate driver module (ser_gigaset or usb_gigaset).
-
-     If you want both of these at once, you are out of luck.
-
-     You can also use the tty class parameter "cidmode" of the device to
-     change its CID mode while the driver is loaded, eg.::
-
-	echo 0 > /sys/class/tty/ttyGU0/cidmode
-
-2.7. Dialing Numbers
---------------------
-provided by an application for dialing out must
-     be a public network number according to the local dialing plan, without
-     any dial prefix for getting an outside line.
-
-     Internal calls can be made by providing an internal extension number
-     prefixed with ``**`` (two asterisks) as the called party number. So to dial
-     eg. the first registered DECT handset, give ``**11`` as the called party
-     number. Dialing ``***`` (three asterisks) calls all extensions
-     simultaneously (global call).
-
-     Unimodem mode does not support internal calls.
-
-2.8. Unregistered Wireless Devices (M101/M105)
-----------------------------------------------
-
-     The main purpose of the ser_gigaset and usb_gigaset drivers is to allow
-     the M101 and M105 wireless devices to be used as ISDN devices for ISDN
-     connections through a Gigaset base. Therefore they assume that the device
-     is registered to a DECT base.
-
-     If the M101/M105 device is not registered to a base, initialization of
-     the device fails, and a corresponding error message is logged by the
-     driver. In that situation, a restricted set of functions is available
-     which includes, in particular, those necessary for registering the device
-     to a base or for switching it between Fixed Part and Portable Part
-     modes. See the gigacontr(8) manpage for details.
-
-3.   Troubleshooting
-====================
-
-3.1. Solutions to frequently reported problems
-----------------------------------------------
-
-     Problem:
-	You have a slow provider and isdn4linux gives up dialing too early.
-     Solution:
-	Load the isdn module using the dialtimeout option. You can do this e.g.
-	by adding a line like::
-
-	   options isdn dialtimeout=15
-
-	to /etc/modprobe.d/gigaset.conf or a similar file.
-
-     Problem:
-	The isdnlog program emits error messages or just doesn't work.
-     Solution:
-	Isdnlog supports only the HiSax driver. Do not attempt to use it with
-	other drivers such as Gigaset.
-
-     Problem:
-	You have two or more DECT data adapters (M101/M105) and only the
-	first one you turn on works.
-     Solution:
-	Select Unimodem mode for all DECT data adapters. (see section 2.5.)
-
-     Problem:
-	Messages like this::
-
-	    usb_gigaset 3-2:1.0: Could not initialize the device.
-
-	appear in your syslog.
-     Solution:
-	Check whether your M10x wireless device is correctly registered to the
-	Gigaset base. (see section 2.7.)
-
-3.2. Telling the driver to provide more information
----------------------------------------------------
-     Building the driver with the "Gigaset debugging" kernel configuration
-     option (CONFIG_GIGASET_DEBUG) gives it the ability to produce additional
-     information useful for debugging.
-
-     You can control the amount of debugging information the driver produces by
-     writing an appropriate value to /sys/module/gigaset/parameters/debug,
-     e.g.::
-
-	echo 0 > /sys/module/gigaset/parameters/debug
-
-     switches off debugging output completely,
-
-     ::
-
-	echo 0x302020 > /sys/module/gigaset/parameters/debug
-
-     enables a reasonable set of debugging output messages. These values are
-     bit patterns where every bit controls a certain type of debugging output.
-     See the constants DEBUG_* in the source file gigaset.h for details.
-
-     The initial value can be set using the debug parameter when loading the
-     module "gigaset", e.g. by adding a line::
-
-	options gigaset debug=0
-
-     to your module configuration file, eg. /etc/modprobe.d/gigaset.conf
-
-     Generated debugging information can be found
-     - as output of the command::
-
-	 dmesg
-
-     - in system log files written by your syslog daemon, usually
-       in /var/log/, e.g. /var/log/messages.
-
-3.3. Reporting problems and bugs
---------------------------------
-     If you can't solve problems with the driver on your own, feel free to
-     use one of the forums, bug trackers, or mailing lists on
-
-	 https://sourceforge.net/projects/gigaset307x
-
-     or write an electronic mail to the maintainers.
-
-     Try to provide as much information as possible, such as
-
-     - distribution
-     - kernel version (uname -r)
-     - gcc version (gcc --version)
-     - hardware architecture (uname -m, ...)
-     - type and firmware version of your device (base and wireless module,
-       if any)
-     - output of "lsusb -v" (if using an USB device)
-     - error messages
-     - relevant system log messages (it would help if you activate debug
-       output as described in 3.2.)
-
-     For help with general configuration problems not specific to our driver,
-     such as isdn4linux and network configuration issues, please refer to the
-     appropriate forums and newsgroups.
-
-3.4. Reporting problem solutions
---------------------------------
-     If you solved a problem with our drivers, wrote startup scripts for your
-     distribution, ... feel free to contact us (using one of the places
-     mentioned in 3.3.). We'd like to add scripts, hints, documentation
-     to the driver and/or the project web page.
-
-
-4.   Links, other software
-==========================
-
-     - Sourceforge project developing this driver and associated tools
-	 https://sourceforge.net/projects/gigaset307x
-     - Yahoo! Group on the Siemens Gigaset family of devices
-	 https://de.groups.yahoo.com/group/Siemens-Gigaset
-     - Siemens Gigaset/T-Sinus compatibility table
-	 http://www.erbze.info/sinus_gigaset.htm
-	    (archived at https://web.archive.org/web/20100717020421/http://www.erbze.info:80/sinus_gigaset.htm )
-
-
-5.   Credits
-============
-
-     Thanks to
-
-     Karsten Keil
-	for his help with isdn4linux
-     Deti Fliegl
-	for his base driver code
-     Dennis Dietrich
-	for his kernel 2.6 patches
-     Andreas Rummel
-	for his work and logs to get unimodem mode working
-     Andreas Degert
-	for his logs and patches to get cx 100 working
-     Dietrich Feist
-	for his generous donation of one M105 and two M101 cordless adapters
-     Christoph Schweers
-	for his generous donation of a M34 device
-
-     and all the other people who sent logs and other information.
diff --git a/Documentation/isdn/hysdn.rst b/Documentation/isdn/hysdn.rst
deleted file mode 100644
index 0a168d1cbffc..000000000000
--- a/Documentation/isdn/hysdn.rst
+++ /dev/null
@@ -1,196 +0,0 @@
-============
-Hysdn Driver
-============
-
-The hysdn driver has been written by
-Werner Cornelius (werner@isdn4linux.de or werner@titro.de)
-for Hypercope GmbH Aachen Germany. Hypercope agreed to publish this driver
-under the GNU General Public License.
-
-The CAPI 2.0-support was added by Ulrich Albrecht (ualbrecht@hypercope.de)
-for Hypercope GmbH Aachen, Germany.
-
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-.. Table of contents
-
-    1. About the driver
-
-    2. Loading/Unloading the driver
-
-    3. Entries in the /proc filesystem
-
-    4. The /proc/net/hysdn/cardconfX file
-
-    5. The /proc/net/hysdn/cardlogX file
-
-    6. Where to get additional info and help
-
-
-1. About the driver
-===================
-
-   The drivers/isdn/hysdn subdir contains a driver for HYPERCOPEs active
-   PCI isdn cards Champ, Ergo and Metro. To enable support for this cards
-   enable ISDN support in the kernel config and support for HYSDN cards in
-   the active cards submenu. The driver may only be compiled and used if
-   support for loadable modules and the process filesystem have been enabled.
-
-   These cards provide two different interfaces to the kernel. Without the
-   optional CAPI 2.0 support, they register as ethernet card. IP-routing
-   to a ISDN-destination is performed on the card itself. All necessary
-   handlers for various protocols like ppp and others as well as config info
-   and firmware may be fetched from Hypercopes WWW-Site www.hypercope.de.
-
-   With CAPI 2.0 support enabled, the card can also be used as a CAPI 2.0
-   compliant devices with either CAPI 2.0 applications
-   (check isdn4k-utils) or -using the capidrv module- as a regular
-   isdn4linux device. This is done via the same mechanism as with the
-   active AVM cards and in fact uses the same module.
-
-
-2. Loading/Unloading the driver
-===============================
-
-   The module has no command line parameters and auto detects up to 10 cards
-   in the id-range 0-9.
-   If a loaded driver shall be unloaded all open files in the /proc/net/hysdn
-   subdir need to be closed and all ethernet interfaces allocated by this
-   driver must be shut down. Otherwise the module counter will avoid a module
-   unload.
-
-   If you are using the CAPI 2.0-interface, make sure to load/modprobe the
-   kernelcapi-module first.
-
-   If you plan to use the capidrv-link to isdn4linux, make sure to load
-   capidrv.o after all modules using this driver (i.e. after hysdn and
-   any avm-specific modules).
-
-3. Entries in the /proc filesystem
-==================================
-
-   When the module has been loaded it adds the directory hysdn in the
-   /proc/net tree. This directory contains exactly 2 file entries for each
-   card. One is called cardconfX and the other cardlogX, where X is the
-   card id number from 0 to 9.
-   The cards are numbered in the order found in the PCI config data.
-
-4. The /proc/net/hysdn/cardconfX file
-=====================================
-
-   This file may be read to get by everyone to get info about the cards type,
-   actual state, available features and used resources.
-   The first 3 entries (id, bus and slot) are PCI info fields, the following
-   type field gives the information about the cards type:
-
-   - 4 -> Ergo card (server card with 2 b-chans)
-   - 5 -> Metro card (server card with 4 or 8 b-chans)
-   - 6 -> Champ card (client card with 2 b-chans)
-
-   The following 3 fields show the hardware assignments for irq, iobase and the
-   dual ported memory (dp-mem).
-
-   The fields b-chans and fax-chans announce the available card resources of
-   this types for the user.
-
-   The state variable indicates the actual drivers state for this card with the
-   following assignments.
-
-   - 0 -> card has not been booted since driver load
-   - 1 -> card booting is actually in progess
-   - 2 -> card is in an error state due to a previous boot failure
-   - 3 -> card is booted and active
-
-   And the last field (device) shows the name of the ethernet device assigned
-   to this card. Up to the first successful boot this field only shows a -
-   to tell that no net device has been allocated up to now. Once a net device
-   has been allocated it remains assigned to this card, even if a card is
-   rebooted and an boot error occurs.
-
-   Writing to the cardconfX file boots the card or transfers config lines to
-   the cards firmware. The type of data is automatically detected when the
-   first data is written. Only root has write access to this file.
-   The firmware boot files are normally called hyclient.pof for client cards
-   and hyserver.pof for server cards.
-   After successfully writing the boot file, complete config files or single
-   config lines may be copied to this file.
-   If an error occurs the return value given to the writing process has the
-   following additional codes (decimal):
-
-   ==== ============================================
-   1000 Another process is currently bootng the card
-   1001 Invalid firmware header
-   1002 Boards dual-port RAM test failed
-   1003 Internal firmware handler error
-   1004 Boot image size invalid
-   1005 First boot stage (bootstrap loader) failed
-   1006 Second boot stage failure
-   1007 Timeout waiting for card ready during boot
-   1008 Operation only allowed in booted state
-   1009 Config line too long
-   1010 Invalid channel number
-   1011 Timeout sending config data
-   ==== ============================================
-
-   Additional info about error reasons may be fetched from the log output.
-
-5. The /proc/net/hysdn/cardlogX file
-====================================
-
-   The cardlogX file entry may be opened multiple for reading by everyone to
-   get the cards and drivers log data. Card messages always start with the
-   keyword LOG. All other lines are output from the driver.
-   The driver log data may be redirected to the syslog by selecting the
-   appropriate bitmask. The cards log messages will always be send to this
-   interface but never to the syslog.
-
-   A root user may write a decimal or hex (with 0x) value t this file to select
-   desired output options. As mentioned above the cards log dat is always
-   written to the cardlog file independent of the following options only used
-   to check and debug the driver itself:
-
-   For example::
-
-	echo "0x34560078" > /proc/net/hysdn/cardlog0
-
-   to output the hex log mask 34560078 for card 0.
-
-   The written value is regarded as an unsigned 32-Bit value, bit ored for
-   desired output. The following bits are already assigned:
-
-   ==========   ============================================================
-   0x80000000   All driver log data is alternatively via syslog
-   0x00000001   Log memory allocation errors
-   0x00000010   Firmware load start and close are logged
-   0x00000020   Log firmware record parser
-   0x00000040   Log every firmware write actions
-   0x00000080   Log all card related boot messages
-   0x00000100   Output all config data sent for debugging purposes
-   0x00000200   Only non comment config lines are shown wth channel
-   0x00000400   Additional conf log output
-   0x00001000   Log the asynchronous scheduler actions (config and log)
-   0x00100000   Log all open and close actions to /proc/net/hysdn/card files
-   0x00200000   Log all actions from /proc file entries
-   0x00010000   Log network interface init and deinit
-   ==========   ============================================================
-
-6. Where to get additional info and help
-========================================
-
-   If you have any problems concerning the driver or configuration contact
-   the Hypercope support team (support@hypercope.de) and or the authors
-   Werner Cornelius (werner@isdn4linux or cornelius@titro.de) or
-   Ulrich Albrecht (ualbrecht@hypercope.de).
diff --git a/Documentation/isdn/index.rst b/Documentation/isdn/index.rst
index 407e74b78372..9622939fa526 100644
--- a/Documentation/isdn/index.rst
+++ b/Documentation/isdn/index.rst
@@ -9,9 +9,6 @@ ISDN
 
    interface_capi
 
-   avmb1
-   gigaset
-   hysdn
    m_isdn
 
    credits
diff --git a/MAINTAINERS b/MAINTAINERS
index 12d602e335f7..0a996ac26047 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8707,7 +8707,7 @@ S:	Maintained
 F:	drivers/isdn/mISDN
 F:	drivers/isdn/hardware
 
-ISDN/CAPI SUBSYSTEM
+ISDN/CMTP OVER BLUETOOTH
 M:	Karsten Keil <isdn@linux-pingi.de>
 L:	isdn4linux@listserv.isdn4linux.de (subscribers-only)
 L:	netdev@vger.kernel.org
@@ -8715,7 +8715,6 @@ W:	http://www.isdn4linux.de
 S:	Odd Fixes
 F:	Documentation/isdn/
 F:	drivers/isdn/capi/
-F:	drivers/staging/isdn/
 F:	net/bluetooth/cmtp/
 F:	include/linux/isdn/
 F:	include/uapi/linux/isdn/
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 6f1fa4c849a1..ab83326f4b7e 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -116,8 +116,6 @@ source "drivers/staging/fieldbus/Kconfig"
 
 source "drivers/staging/kpc2000/Kconfig"
 
-source "drivers/staging/isdn/Kconfig"
-
 source "drivers/staging/wusbcore/Kconfig"
 source "drivers/staging/uwb/Kconfig"
 
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index a90f9b308c8d..dfddb9864b2e 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -48,7 +48,6 @@ obj-$(CONFIG_STAGING_GASKET_FRAMEWORK)	+= gasket/
 obj-$(CONFIG_XIL_AXIS_FIFO)	+= axis-fifo/
 obj-$(CONFIG_FIELDBUS_DEV)     += fieldbus/
 obj-$(CONFIG_KPC2000)		+= kpc2000/
-obj-$(CONFIG_ISDN_CAPI)		+= isdn/
 obj-$(CONFIG_UWB)		+= uwb/
 obj-$(CONFIG_USB_WUSB)		+= wusbcore/
 obj-$(CONFIG_EXFAT_FS)		+= exfat/
diff --git a/drivers/staging/isdn/Kconfig b/drivers/staging/isdn/Kconfig
deleted file mode 100644
index faaf63887094..000000000000
--- a/drivers/staging/isdn/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-menu "ISDN CAPI drivers"
-	depends on ISDN_CAPI
-
-source "drivers/staging/isdn/avm/Kconfig"
-
-source "drivers/staging/isdn/gigaset/Kconfig"
-
-source "drivers/staging/isdn/hysdn/Kconfig"
-
-endmenu
-
diff --git a/drivers/staging/isdn/Makefile b/drivers/staging/isdn/Makefile
deleted file mode 100644
index 025504bae5df..000000000000
--- a/drivers/staging/isdn/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-# Makefile for the kernel ISDN subsystem and device drivers.
-
-# Object files in subdirectories
-
-obj-$(CONFIG_CAPI_AVM)			+= avm/
-obj-$(CONFIG_HYSDN)			+= hysdn/
-obj-$(CONFIG_ISDN_DRV_GIGASET)		+= gigaset/
diff --git a/drivers/staging/isdn/TODO b/drivers/staging/isdn/TODO
deleted file mode 100644
index 9210d11eb68b..000000000000
--- a/drivers/staging/isdn/TODO
+++ /dev/null
@@ -1,22 +0,0 @@
-TODO: Remove in late 2019 unless there are users
-
-
-I tried to find any indication of whether the capi drivers are
-still in use, and have not found anything  from a long time ago.
-
-With public ISDN networks almost completely shut down over the past 12
-months, there is very little you can actually do with this hardware. The
-main remaining use case would be to connect ISDN voice phones to an
-in-house installation with Asterisk or LCR, but anyone trying this in
-turn seems to be using either the mISDN driver stack, or out-of-tree
-drivers from the hardware vendors.
-
-I may of course have missed something, so I would suggest moving
-these into drivers/staging/ just in case someone still uses one
-of the three remaining in-kernel drivers (avm, hysdn, gigaset).
-
-If nobody complains, we can remove them entirely in six months,
-or otherwise move the core code and any drivers that are still
-needed back into drivers/isdn.
-
-  Arnd Bergmann <arnd@arndb.de>
diff --git a/drivers/staging/isdn/avm/Kconfig b/drivers/staging/isdn/avm/Kconfig
deleted file mode 100644
index 81483db067bb..000000000000
--- a/drivers/staging/isdn/avm/Kconfig
+++ /dev/null
@@ -1,65 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# ISDN AVM drivers
-#
-
-menuconfig CAPI_AVM
-	bool "Active AVM cards"
-	help
-	  Enable support for AVM active ISDN cards.
-
-if CAPI_AVM
-
-config ISDN_DRV_AVMB1_B1ISA
-	tristate "AVM B1 ISA support"
-	depends on ISA
-	help
-	  Enable support for the ISA version of the AVM B1 card.
-
-config ISDN_DRV_AVMB1_B1PCI
-	tristate "AVM B1 PCI support"
-	depends on PCI
-	help
-	  Enable support for the PCI version of the AVM B1 card.
-
-config ISDN_DRV_AVMB1_B1PCIV4
-	bool "AVM B1 PCI V4 support"
-	depends on ISDN_DRV_AVMB1_B1PCI
-	help
-	  Enable support for the V4 version of AVM B1 PCI card.
-
-config ISDN_DRV_AVMB1_T1ISA
-	tristate "AVM T1/T1-B ISA support"
-	depends on ISA
-	help
-	  Enable support for the AVM T1 T1B card.
-	  Note: This is a PRI card and handle 30 B-channels.
-
-config ISDN_DRV_AVMB1_B1PCMCIA
-	tristate "AVM B1/M1/M2 PCMCIA support"
-	depends on PCMCIA
-	help
-	  Enable support for the PCMCIA version of the AVM B1 card.
-
-config ISDN_DRV_AVMB1_AVM_CS
-	tristate "AVM B1/M1/M2 PCMCIA cs module"
-	depends on ISDN_DRV_AVMB1_B1PCMCIA
-	help
-	  Enable the PCMCIA client driver for the AVM B1/M1/M2
-	  PCMCIA cards.
-
-config ISDN_DRV_AVMB1_T1PCI
-	tristate "AVM T1/T1-B PCI support"
-	depends on PCI
-	help
-	  Enable support for the AVM T1 T1B card.
-	  Note: This is a PRI card and handle 30 B-channels.
-
-config ISDN_DRV_AVMB1_C4
-	tristate "AVM C4/C2 support"
-	depends on PCI
-	help
-	  Enable support for the AVM C4/C2 PCI cards.
-	  These cards handle 4/2 BRI ISDN lines (8/4 channels).
-
-endif # CAPI_AVM
diff --git a/drivers/staging/isdn/avm/Makefile b/drivers/staging/isdn/avm/Makefile
deleted file mode 100644
index 3830a0573fcc..000000000000
--- a/drivers/staging/isdn/avm/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-# Makefile for the AVM ISDN device drivers
-
-# Each configuration option enables a list of files.
-
-obj-$(CONFIG_ISDN_DRV_AVMB1_B1ISA)	+= b1isa.o b1.o
-obj-$(CONFIG_ISDN_DRV_AVMB1_B1PCI)	+= b1pci.o b1.o b1dma.o
-obj-$(CONFIG_ISDN_DRV_AVMB1_B1PCMCIA)	+= b1pcmcia.o b1.o
-obj-$(CONFIG_ISDN_DRV_AVMB1_AVM_CS)	+= avm_cs.o
-obj-$(CONFIG_ISDN_DRV_AVMB1_T1ISA)	+= t1isa.o b1.o
-obj-$(CONFIG_ISDN_DRV_AVMB1_T1PCI)	+= t1pci.o b1.o b1dma.o
-obj-$(CONFIG_ISDN_DRV_AVMB1_C4)		+= c4.o b1.o
diff --git a/drivers/staging/isdn/avm/avm_cs.c b/drivers/staging/isdn/avm/avm_cs.c
deleted file mode 100644
index 62b8030ee331..000000000000
--- a/drivers/staging/isdn/avm/avm_cs.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/* $Id: avm_cs.c,v 1.4.6.3 2001/09/23 22:24:33 kai Exp $
- *
- * A PCMCIA client driver for AVM B1/M1/M2
- *
- * Copyright 1999 by Carsten Paeth <calle@calle.de>
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/ptrace.h>
-#include <linux/string.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/major.h>
-#include <asm/io.h>
-
-#include <pcmcia/cistpl.h>
-#include <pcmcia/ciscode.h>
-#include <pcmcia/ds.h>
-#include <pcmcia/cisreg.h>
-
-#include <linux/skbuff.h>
-#include <linux/capi.h>
-#include <linux/b1lli.h>
-#include <linux/b1pcmcia.h>
-
-/*====================================================================*/
-
-MODULE_DESCRIPTION("CAPI4Linux: PCMCIA client driver for AVM B1/M1/M2");
-MODULE_AUTHOR("Carsten Paeth");
-MODULE_LICENSE("GPL");
-
-/*====================================================================*/
-
-static int avmcs_config(struct pcmcia_device *link);
-static void avmcs_release(struct pcmcia_device *link);
-static void avmcs_detach(struct pcmcia_device *p_dev);
-
-static int avmcs_probe(struct pcmcia_device *p_dev)
-{
-	/* General socket configuration */
-	p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
-	p_dev->config_index = 1;
-	p_dev->config_regs = PRESENT_OPTION;
-
-	return avmcs_config(p_dev);
-} /* avmcs_attach */
-
-
-static void avmcs_detach(struct pcmcia_device *link)
-{
-	avmcs_release(link);
-} /* avmcs_detach */
-
-static int avmcs_configcheck(struct pcmcia_device *p_dev, void *priv_data)
-{
-	p_dev->resource[0]->end = 16;
-	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
-	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
-
-	return pcmcia_request_io(p_dev);
-}
-
-static int avmcs_config(struct pcmcia_device *link)
-{
-	int i = -1;
-	char devname[128];
-	int cardtype;
-	int (*addcard)(unsigned int port, unsigned irq);
-
-	devname[0] = 0;
-	if (link->prod_id[1])
-		strlcpy(devname, link->prod_id[1], sizeof(devname));
-
-	/*
-	 * find IO port
-	 */
-	if (pcmcia_loop_config(link, avmcs_configcheck, NULL))
-		return -ENODEV;
-
-	do {
-		if (!link->irq) {
-			/* undo */
-			pcmcia_disable_device(link);
-			break;
-		}
-
-		/*
-		 * configure the PCMCIA socket
-		 */
-		i = pcmcia_enable_device(link);
-		if (i != 0) {
-			pcmcia_disable_device(link);
-			break;
-		}
-
-	} while (0);
-
-	if (devname[0]) {
-		char *s = strrchr(devname, ' ');
-		if (!s)
-			s = devname;
-		else s++;
-		if (strcmp("M1", s) == 0) {
-			cardtype = AVM_CARDTYPE_M1;
-		} else if (strcmp("M2", s) == 0) {
-			cardtype = AVM_CARDTYPE_M2;
-		} else {
-			cardtype = AVM_CARDTYPE_B1;
-		}
-	} else
-		cardtype = AVM_CARDTYPE_B1;
-
-	/* If any step failed, release any partially configured state */
-	if (i != 0) {
-		avmcs_release(link);
-		return -ENODEV;
-	}
-
-
-	switch (cardtype) {
-	case AVM_CARDTYPE_M1: addcard = b1pcmcia_addcard_m1; break;
-	case AVM_CARDTYPE_M2: addcard = b1pcmcia_addcard_m2; break;
-	default:
-	case AVM_CARDTYPE_B1: addcard = b1pcmcia_addcard_b1; break;
-	}
-	if ((i = (*addcard)(link->resource[0]->start, link->irq)) < 0) {
-		dev_err(&link->dev,
-			"avm_cs: failed to add AVM-Controller at i/o %#x, irq %d\n",
-			(unsigned int) link->resource[0]->start, link->irq);
-		avmcs_release(link);
-		return -ENODEV;
-	}
-	return 0;
-
-} /* avmcs_config */
-
-
-static void avmcs_release(struct pcmcia_device *link)
-{
-	b1pcmcia_delcard(link->resource[0]->start, link->irq);
-	pcmcia_disable_device(link);
-} /* avmcs_release */
-
-
-static const struct pcmcia_device_id avmcs_ids[] = {
-	PCMCIA_DEVICE_PROD_ID12("AVM", "ISDN-Controller B1", 0x95d42008, 0x845dc335),
-	PCMCIA_DEVICE_PROD_ID12("AVM", "Mobile ISDN-Controller M1", 0x95d42008, 0x81e10430),
-	PCMCIA_DEVICE_PROD_ID12("AVM", "Mobile ISDN-Controller M2", 0x95d42008, 0x18e8558a),
-	PCMCIA_DEVICE_NULL
-};
-MODULE_DEVICE_TABLE(pcmcia, avmcs_ids);
-
-static struct pcmcia_driver avmcs_driver = {
-	.owner	= THIS_MODULE,
-	.name		= "avm_cs",
-	.probe = avmcs_probe,
-	.remove	= avmcs_detach,
-	.id_table = avmcs_ids,
-};
-module_pcmcia_driver(avmcs_driver);
diff --git a/drivers/staging/isdn/avm/avmcard.h b/drivers/staging/isdn/avm/avmcard.h
deleted file mode 100644
index cdfa89c71997..000000000000
--- a/drivers/staging/isdn/avm/avmcard.h
+++ /dev/null
@@ -1,581 +0,0 @@
-/* $Id: avmcard.h,v 1.1.4.1.2.1 2001/12/21 15:00:17 kai Exp $
- *
- * Copyright 1999 by Carsten Paeth <calle@calle.de>
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#ifndef _AVMCARD_H_
-#define _AVMCARD_H_
-
-#include <linux/spinlock.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-
-#define	AVMB1_PORTLEN		0x1f
-#define AVM_MAXVERSION		8
-#define AVM_NCCI_PER_CHANNEL	4
-
-/*
- * Versions
- */
-
-#define	VER_DRIVER	0
-#define	VER_CARDTYPE	1
-#define	VER_HWID	2
-#define	VER_SERIAL	3
-#define	VER_OPTION	4
-#define	VER_PROTO	5
-#define	VER_PROFILE	6
-#define	VER_CAPI	7
-
-enum avmcardtype {
-	avm_b1isa,
-	avm_b1pci,
-	avm_b1pcmcia,
-	avm_m1,
-	avm_m2,
-	avm_t1isa,
-	avm_t1pci,
-	avm_c4,
-	avm_c2
-};
-
-typedef struct avmcard_dmabuf {
-	long        size;
-	u8       *dmabuf;
-	dma_addr_t  dmaaddr;
-} avmcard_dmabuf;
-
-typedef struct avmcard_dmainfo {
-	u32                recvlen;
-	avmcard_dmabuf       recvbuf;
-
-	avmcard_dmabuf       sendbuf;
-	struct sk_buff_head  send_queue;
-
-	struct pci_dev      *pcidev;
-} avmcard_dmainfo;
-
-typedef	struct avmctrl_info {
-	char cardname[32];
-
-	int versionlen;
-	char versionbuf[1024];
-	char *version[AVM_MAXVERSION];
-
-	char infobuf[128];	/* for function procinfo */
-
-	struct avmcard  *card;
-	struct capi_ctr  capi_ctrl;
-
-	struct list_head ncci_head;
-} avmctrl_info;
-
-typedef struct avmcard {
-	char name[32];
-
-	spinlock_t lock;
-	unsigned int port;
-	unsigned irq;
-	unsigned long membase;
-	enum avmcardtype cardtype;
-	unsigned char revision;
-	unsigned char class;
-	int cardnr; /* for t1isa */
-
-	char msgbuf[128];	/* capimsg msg part */
-	char databuf[2048];	/* capimsg data part */
-
-	void __iomem *mbase;
-	volatile u32 csr;
-	avmcard_dmainfo *dma;
-
-	struct avmctrl_info *ctrlinfo;
-
-	u_int nr_controllers;
-	u_int nlogcontr;
-	struct list_head list;
-} avmcard;
-
-extern int b1_irq_table[16];
-
-/*
- * LLI Messages to the ISDN-ControllerISDN Controller
- */
-
-#define	SEND_POLL		0x72	/*
-					 * after load <- RECEIVE_POLL
-					 */
-#define SEND_INIT		0x11	/*
-					 * first message <- RECEIVE_INIT
-					 * int32 NumApplications  int32
-					 * NumNCCIs int32 BoardNumber
-					 */
-#define SEND_REGISTER		0x12	/*
-					 * register an application int32
-					 * ApplIDId int32 NumMessages
-					 * int32 NumB3Connections int32
-					 * NumB3Blocks int32 B3Size
-					 *
-					 * AnzB3Connection != 0 &&
-					 * AnzB3Blocks >= 1 && B3Size >= 1
-					 */
-#define SEND_RELEASE		0x14	/*
-					 * deregister an application int32
-					 * ApplID
-					 */
-#define SEND_MESSAGE		0x15	/*
-					 * send capi-message int32 length
-					 * capi-data ...
-					 */
-#define SEND_DATA_B3_REQ	0x13	/*
-					 * send capi-data-message int32
-					 * MsgLength capi-data ... int32
-					 * B3Length data ....
-					 */
-
-#define SEND_CONFIG		0x21    /*
-					 */
-
-#define SEND_POLLACK		0x73    /* T1 Watchdog */
-
-/*
- * LLI Messages from the ISDN-ControllerISDN Controller
- */
-
-#define RECEIVE_POLL		0x32	/*
-					 * <- after SEND_POLL
-					 */
-#define RECEIVE_INIT		0x27	/*
-					 * <- after SEND_INIT int32 length
-					 * byte total length b1struct board
-					 * driver revision b1struct card
-					 * type b1struct reserved b1struct
-					 * serial number b1struct driver
-					 * capability b1struct d-channel
-					 * protocol b1struct CAPI-2.0
-					 * profile b1struct capi version
-					 */
-#define RECEIVE_MESSAGE		0x21	/*
-					 * <- after SEND_MESSAGE int32
-					 * AppllID int32 Length capi-data
-					 * ....
-					 */
-#define RECEIVE_DATA_B3_IND	0x22	/*
-					 * received data int32 AppllID
-					 * int32 Length capi-data ...
-					 * int32 B3Length data ...
-					 */
-#define RECEIVE_START		0x23	/*
-					 * Handshake
-					 */
-#define RECEIVE_STOP		0x24	/*
-					 * Handshake
-					 */
-#define RECEIVE_NEW_NCCI	0x25	/*
-					 * int32 AppllID int32 NCCI int32
-					 * WindowSize
-					 */
-#define RECEIVE_FREE_NCCI	0x26	/*
-					 * int32 AppllID int32 NCCI
-					 */
-#define RECEIVE_RELEASE		0x26	/*
-					 * int32 AppllID int32 0xffffffff
-					 */
-#define RECEIVE_TASK_READY	0x31	/*
-					 * int32 tasknr
-					 * int32 Length Taskname ...
-					 */
-#define RECEIVE_DEBUGMSG	0x71	/*
-					 * int32 Length message
-					 *
-					 */
-#define RECEIVE_POLLDWORD	0x75	/* t1pci in dword mode */
-
-#define WRITE_REGISTER		0x00
-#define READ_REGISTER		0x01
-
-/*
- * port offsets
- */
-
-#define B1_READ			0x00
-#define B1_WRITE		0x01
-#define B1_INSTAT		0x02
-#define B1_OUTSTAT		0x03
-#define B1_ANALYSE		0x04
-#define B1_REVISION		0x05
-#define B1_RESET		0x10
-
-
-#define B1_STAT0(cardtype)  ((cardtype) == avm_m1 ? 0x81200000l : 0x80A00000l)
-#define B1_STAT1(cardtype)  (0x80E00000l)
-
-/* ---------------------------------------------------------------- */
-
-static inline unsigned char b1outp(unsigned int base,
-				   unsigned short offset,
-				   unsigned char value)
-{
-	outb(value, base + offset);
-	return inb(base + B1_ANALYSE);
-}
-
-
-static inline int b1_rx_full(unsigned int base)
-{
-	return inb(base + B1_INSTAT) & 0x1;
-}
-
-static inline unsigned char b1_get_byte(unsigned int base)
-{
-	unsigned long stop = jiffies + 1 * HZ;	/* maximum wait time 1 sec */
-	while (!b1_rx_full(base) && time_before(jiffies, stop));
-	if (b1_rx_full(base))
-		return inb(base + B1_READ);
-	printk(KERN_CRIT "b1lli(0x%x): rx not full after 1 second\n", base);
-	return 0;
-}
-
-static inline unsigned int b1_get_word(unsigned int base)
-{
-	unsigned int val = 0;
-	val |= b1_get_byte(base);
-	val |= (b1_get_byte(base) << 8);
-	val |= (b1_get_byte(base) << 16);
-	val |= (b1_get_byte(base) << 24);
-	return val;
-}
-
-static inline int b1_tx_empty(unsigned int base)
-{
-	return inb(base + B1_OUTSTAT) & 0x1;
-}
-
-static inline void b1_put_byte(unsigned int base, unsigned char val)
-{
-	while (!b1_tx_empty(base));
-	b1outp(base, B1_WRITE, val);
-}
-
-static inline int b1_save_put_byte(unsigned int base, unsigned char val)
-{
-	unsigned long stop = jiffies + 2 * HZ;
-	while (!b1_tx_empty(base) && time_before(jiffies, stop));
-	if (!b1_tx_empty(base)) return -1;
-	b1outp(base, B1_WRITE, val);
-	return 0;
-}
-
-static inline void b1_put_word(unsigned int base, unsigned int val)
-{
-	b1_put_byte(base, val & 0xff);
-	b1_put_byte(base, (val >> 8) & 0xff);
-	b1_put_byte(base, (val >> 16) & 0xff);
-	b1_put_byte(base, (val >> 24) & 0xff);
-}
-
-static inline unsigned int b1_get_slice(unsigned int base,
-					unsigned char *dp)
-{
-	unsigned int len, i;
-
-	len = i = b1_get_word(base);
-	while (i-- > 0) *dp++ = b1_get_byte(base);
-	return len;
-}
-
-static inline void b1_put_slice(unsigned int base,
-				unsigned char *dp, unsigned int len)
-{
-	unsigned i = len;
-	b1_put_word(base, i);
-	while (i-- > 0)
-		b1_put_byte(base, *dp++);
-}
-
-static void b1_wr_reg(unsigned int base,
-		      unsigned int reg,
-		      unsigned int value)
-{
-	b1_put_byte(base, WRITE_REGISTER);
-	b1_put_word(base, reg);
-	b1_put_word(base, value);
-}
-
-static inline unsigned int b1_rd_reg(unsigned int base,
-				     unsigned int reg)
-{
-	b1_put_byte(base, READ_REGISTER);
-	b1_put_word(base, reg);
-	return b1_get_word(base);
-
-}
-
-static inline void b1_reset(unsigned int base)
-{
-	b1outp(base, B1_RESET, 0);
-	mdelay(55 * 2);	/* 2 TIC's */
-
-	b1outp(base, B1_RESET, 1);
-	mdelay(55 * 2);	/* 2 TIC's */
-
-	b1outp(base, B1_RESET, 0);
-	mdelay(55 * 2);	/* 2 TIC's */
-}
-
-static inline unsigned char b1_disable_irq(unsigned int base)
-{
-	return b1outp(base, B1_INSTAT, 0x00);
-}
-
-/* ---------------------------------------------------------------- */
-
-static inline void b1_set_test_bit(unsigned int base,
-				   enum avmcardtype cardtype,
-				   int onoff)
-{
-	b1_wr_reg(base, B1_STAT0(cardtype), onoff ? 0x21 : 0x20);
-}
-
-static inline int b1_get_test_bit(unsigned int base,
-				  enum avmcardtype cardtype)
-{
-	return (b1_rd_reg(base, B1_STAT0(cardtype)) & 0x01) != 0;
-}
-
-/* ---------------------------------------------------------------- */
-
-#define T1_FASTLINK		0x00
-#define T1_SLOWLINK		0x08
-
-#define T1_READ			B1_READ
-#define T1_WRITE		B1_WRITE
-#define T1_INSTAT		B1_INSTAT
-#define T1_OUTSTAT		B1_OUTSTAT
-#define T1_IRQENABLE		0x05
-#define T1_FIFOSTAT		0x06
-#define T1_RESETLINK		0x10
-#define T1_ANALYSE		0x11
-#define T1_IRQMASTER		0x12
-#define T1_IDENT		0x17
-#define T1_RESETBOARD		0x1f
-
-#define	T1F_IREADY		0x01
-#define	T1F_IHALF		0x02
-#define	T1F_IFULL		0x04
-#define	T1F_IEMPTY		0x08
-#define	T1F_IFLAGS		0xF0
-
-#define	T1F_OREADY		0x10
-#define	T1F_OHALF		0x20
-#define	T1F_OEMPTY		0x40
-#define	T1F_OFULL		0x80
-#define	T1F_OFLAGS		0xF0
-
-/* there are HEMA cards with 1k and 4k FIFO out */
-#define FIFO_OUTBSIZE		256
-#define FIFO_INPBSIZE		512
-
-#define HEMA_VERSION_ID		0
-#define HEMA_PAL_ID		0
-
-static inline void t1outp(unsigned int base,
-			  unsigned short offset,
-			  unsigned char value)
-{
-	outb(value, base + offset);
-}
-
-static inline unsigned char t1inp(unsigned int base,
-				  unsigned short offset)
-{
-	return inb(base + offset);
-}
-
-static inline int t1_isfastlink(unsigned int base)
-{
-	return (inb(base + T1_IDENT) & ~0x82) == 1;
-}
-
-static inline unsigned char t1_fifostatus(unsigned int base)
-{
-	return inb(base + T1_FIFOSTAT);
-}
-
-static inline unsigned int t1_get_slice(unsigned int base,
-					unsigned char *dp)
-{
-	unsigned int len, i;
-#ifdef FASTLINK_DEBUG
-	unsigned wcnt = 0, bcnt = 0;
-#endif
-
-	len = i = b1_get_word(base);
-	if (t1_isfastlink(base)) {
-		int status;
-		while (i > 0) {
-			status = t1_fifostatus(base) & (T1F_IREADY | T1F_IHALF);
-			if (i >= FIFO_INPBSIZE) status |= T1F_IFULL;
-
-			switch (status) {
-			case T1F_IREADY | T1F_IHALF | T1F_IFULL:
-				insb(base + B1_READ, dp, FIFO_INPBSIZE);
-				dp += FIFO_INPBSIZE;
-				i -= FIFO_INPBSIZE;
-#ifdef FASTLINK_DEBUG
-				wcnt += FIFO_INPBSIZE;
-#endif
-				break;
-			case T1F_IREADY | T1F_IHALF:
-				insb(base + B1_READ, dp, i);
-#ifdef FASTLINK_DEBUG
-				wcnt += i;
-#endif
-				dp += i;
-				i = 0;
-				break;
-			default:
-				*dp++ = b1_get_byte(base);
-				i--;
-#ifdef FASTLINK_DEBUG
-				bcnt++;
-#endif
-				break;
-			}
-		}
-#ifdef FASTLINK_DEBUG
-		if (wcnt)
-			printk(KERN_DEBUG "b1lli(0x%x): get_slice l=%d w=%d b=%d\n",
-			       base, len, wcnt, bcnt);
-#endif
-	} else {
-		while (i-- > 0)
-			*dp++ = b1_get_byte(base);
-	}
-	return len;
-}
-
-static inline void t1_put_slice(unsigned int base,
-				unsigned char *dp, unsigned int len)
-{
-	unsigned i = len;
-	b1_put_word(base, i);
-	if (t1_isfastlink(base)) {
-		int status;
-		while (i > 0) {
-			status = t1_fifostatus(base) & (T1F_OREADY | T1F_OHALF);
-			if (i >= FIFO_OUTBSIZE) status |= T1F_OEMPTY;
-			switch (status) {
-			case T1F_OREADY | T1F_OHALF | T1F_OEMPTY:
-				outsb(base + B1_WRITE, dp, FIFO_OUTBSIZE);
-				dp += FIFO_OUTBSIZE;
-				i -= FIFO_OUTBSIZE;
-				break;
-			case T1F_OREADY | T1F_OHALF:
-				outsb(base + B1_WRITE, dp, i);
-				dp += i;
-				i = 0;
-				break;
-			default:
-				b1_put_byte(base, *dp++);
-				i--;
-				break;
-			}
-		}
-	} else {
-		while (i-- > 0)
-			b1_put_byte(base, *dp++);
-	}
-}
-
-static inline void t1_disable_irq(unsigned int base)
-{
-	t1outp(base, T1_IRQMASTER, 0x00);
-}
-
-static inline void t1_reset(unsigned int base)
-{
-	/* reset T1 Controller */
-	b1_reset(base);
-	/* disable irq on HEMA */
-	t1outp(base, B1_INSTAT, 0x00);
-	t1outp(base, B1_OUTSTAT, 0x00);
-	t1outp(base, T1_IRQMASTER, 0x00);
-	/* reset HEMA board configuration */
-	t1outp(base, T1_RESETBOARD, 0xf);
-}
-
-static inline void b1_setinterrupt(unsigned int base, unsigned irq,
-				   enum avmcardtype cardtype)
-{
-	switch (cardtype) {
-	case avm_t1isa:
-		t1outp(base, B1_INSTAT, 0x00);
-		t1outp(base, B1_INSTAT, 0x02);
-		t1outp(base, T1_IRQMASTER, 0x08);
-		break;
-	case avm_b1isa:
-		b1outp(base, B1_INSTAT, 0x00);
-		b1outp(base, B1_RESET, b1_irq_table[irq]);
-		b1outp(base, B1_INSTAT, 0x02);
-		break;
-	default:
-	case avm_m1:
-	case avm_m2:
-	case avm_b1pci:
-		b1outp(base, B1_INSTAT, 0x00);
-		b1outp(base, B1_RESET, 0xf0);
-		b1outp(base, B1_INSTAT, 0x02);
-		break;
-	case avm_c4:
-	case avm_t1pci:
-		b1outp(base, B1_RESET, 0xf0);
-		break;
-	}
-}
-
-/* b1.c */
-avmcard *b1_alloc_card(int nr_controllers);
-void b1_free_card(avmcard *card);
-int b1_detect(unsigned int base, enum avmcardtype cardtype);
-void b1_getrevision(avmcard *card);
-int b1_load_t4file(avmcard *card, capiloaddatapart *t4file);
-int b1_load_config(avmcard *card, capiloaddatapart *config);
-int b1_loaded(avmcard *card);
-
-int b1_load_firmware(struct capi_ctr *ctrl, capiloaddata *data);
-void b1_reset_ctr(struct capi_ctr *ctrl);
-void b1_register_appl(struct capi_ctr *ctrl, u16 appl,
-		      capi_register_params *rp);
-void b1_release_appl(struct capi_ctr *ctrl, u16 appl);
-u16  b1_send_message(struct capi_ctr *ctrl, struct sk_buff *skb);
-void b1_parse_version(avmctrl_info *card);
-irqreturn_t b1_interrupt(int interrupt, void *devptr);
-
-int b1_proc_show(struct seq_file *m, void *v);
-
-avmcard_dmainfo *avmcard_dma_alloc(char *name, struct pci_dev *,
-				   long rsize, long ssize);
-void avmcard_dma_free(avmcard_dmainfo *);
-
-/* b1dma.c */
-int b1pciv4_detect(avmcard *card);
-int t1pci_detect(avmcard *card);
-void b1dma_reset(avmcard *card);
-irqreturn_t b1dma_interrupt(int interrupt, void *devptr);
-
-int b1dma_load_firmware(struct capi_ctr *ctrl, capiloaddata *data);
-void b1dma_reset_ctr(struct capi_ctr *ctrl);
-void b1dma_remove_ctr(struct capi_ctr *ctrl);
-void b1dma_register_appl(struct capi_ctr *ctrl,
-			 u16 appl,
-			 capi_register_params *rp);
-void b1dma_release_appl(struct capi_ctr *ctrl, u16 appl);
-u16  b1dma_send_message(struct capi_ctr *ctrl, struct sk_buff *skb);
-int b1dma_proc_show(struct seq_file *m, void *v);
-
-#endif /* _AVMCARD_H_ */
diff --git a/drivers/staging/isdn/avm/b1.c b/drivers/staging/isdn/avm/b1.c
deleted file mode 100644
index 40ca1e8fa09f..000000000000
--- a/drivers/staging/isdn/avm/b1.c
+++ /dev/null
@@ -1,804 +0,0 @@
-/* $Id: b1.c,v 1.1.2.2 2004/01/16 21:09:27 keil Exp $
- *
- * Common module for AVM B1 cards.
- *
- * Copyright 1999 by Carsten Paeth <calle@calle.de>
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/skbuff.h>
-#include <linux/delay.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/capi.h>
-#include <linux/kernelcapi.h>
-#include <linux/slab.h>
-#include <asm/io.h>
-#include <linux/init.h>
-#include <linux/uaccess.h>
-#include <linux/netdevice.h>
-#include <linux/isdn/capilli.h>
-#include "avmcard.h"
-#include <linux/isdn/capicmd.h>
-#include <linux/isdn/capiutil.h>
-
-static char *revision = "$Revision: 1.1.2.2 $";
-
-/* ------------------------------------------------------------- */
-
-MODULE_DESCRIPTION("CAPI4Linux: Common support for active AVM cards");
-MODULE_AUTHOR("Carsten Paeth");
-MODULE_LICENSE("GPL");
-
-/* ------------------------------------------------------------- */
-
-int b1_irq_table[16] =
-{0,
- 0,
- 0,
- 192,				/* irq 3 */
- 32,				/* irq 4 */
- 160,				/* irq 5 */
- 96,				/* irq 6 */
- 224,				/* irq 7 */
- 0,
- 64,				/* irq 9 */
- 80,				/* irq 10 */
- 208,				/* irq 11 */
- 48,				/* irq 12 */
- 0,
- 0,
- 112,				/* irq 15 */
-};
-
-/* ------------------------------------------------------------- */
-
-avmcard *b1_alloc_card(int nr_controllers)
-{
-	avmcard *card;
-	avmctrl_info *cinfo;
-	int i;
-
-	card = kzalloc(sizeof(*card), GFP_KERNEL);
-	if (!card)
-		return NULL;
-
-	cinfo = kcalloc(nr_controllers, sizeof(*cinfo), GFP_KERNEL);
-	if (!cinfo) {
-		kfree(card);
-		return NULL;
-	}
-
-	card->ctrlinfo = cinfo;
-	for (i = 0; i < nr_controllers; i++) {
-		INIT_LIST_HEAD(&cinfo[i].ncci_head);
-		cinfo[i].card = card;
-	}
-	spin_lock_init(&card->lock);
-	card->nr_controllers = nr_controllers;
-
-	return card;
-}
-
-/* ------------------------------------------------------------- */
-
-void b1_free_card(avmcard *card)
-{
-	kfree(card->ctrlinfo);
-	kfree(card);
-}
-
-/* ------------------------------------------------------------- */
-
-int b1_detect(unsigned int base, enum avmcardtype cardtype)
-{
-	int onoff, i;
-
-	/*
-	 * Statusregister 0000 00xx
-	 */
-	if ((inb(base + B1_INSTAT) & 0xfc)
-	    || (inb(base + B1_OUTSTAT) & 0xfc))
-		return 1;
-	/*
-	 * Statusregister 0000 001x
-	 */
-	b1outp(base, B1_INSTAT, 0x2);	/* enable irq */
-	/* b1outp(base, B1_OUTSTAT, 0x2); */
-	if ((inb(base + B1_INSTAT) & 0xfe) != 0x2
-	    /* || (inb(base + B1_OUTSTAT) & 0xfe) != 0x2 */)
-		return 2;
-	/*
-	 * Statusregister 0000 000x
-	 */
-	b1outp(base, B1_INSTAT, 0x0);	/* disable irq */
-	b1outp(base, B1_OUTSTAT, 0x0);
-	if ((inb(base + B1_INSTAT) & 0xfe)
-	    || (inb(base + B1_OUTSTAT) & 0xfe))
-		return 3;
-
-	for (onoff = !0, i = 0; i < 10; i++) {
-		b1_set_test_bit(base, cardtype, onoff);
-		if (b1_get_test_bit(base, cardtype) != onoff)
-			return 4;
-		onoff = !onoff;
-	}
-
-	if (cardtype == avm_m1)
-		return 0;
-
-	if ((b1_rd_reg(base, B1_STAT1(cardtype)) & 0x0f) != 0x01)
-		return 5;
-
-	return 0;
-}
-
-void b1_getrevision(avmcard *card)
-{
-	card->class = inb(card->port + B1_ANALYSE);
-	card->revision = inb(card->port + B1_REVISION);
-}
-
-#define FWBUF_SIZE	256
-int b1_load_t4file(avmcard *card, capiloaddatapart *t4file)
-{
-	unsigned char buf[FWBUF_SIZE];
-	unsigned char *dp;
-	int i, left;
-	unsigned int base = card->port;
-
-	dp = t4file->data;
-	left = t4file->len;
-	while (left > FWBUF_SIZE) {
-		if (t4file->user) {
-			if (copy_from_user(buf, dp, FWBUF_SIZE))
-				return -EFAULT;
-		} else {
-			memcpy(buf, dp, FWBUF_SIZE);
-		}
-		for (i = 0; i < FWBUF_SIZE; i++)
-			if (b1_save_put_byte(base, buf[i]) < 0) {
-				printk(KERN_ERR "%s: corrupted firmware file ?\n",
-				       card->name);
-				return -EIO;
-			}
-		left -= FWBUF_SIZE;
-		dp += FWBUF_SIZE;
-	}
-	if (left) {
-		if (t4file->user) {
-			if (copy_from_user(buf, dp, left))
-				return -EFAULT;
-		} else {
-			memcpy(buf, dp, left);
-		}
-		for (i = 0; i < left; i++)
-			if (b1_save_put_byte(base, buf[i]) < 0) {
-				printk(KERN_ERR "%s: corrupted firmware file ?\n",
-				       card->name);
-				return -EIO;
-			}
-	}
-	return 0;
-}
-
-int b1_load_config(avmcard *card, capiloaddatapart *config)
-{
-	unsigned char buf[FWBUF_SIZE];
-	unsigned char *dp;
-	unsigned int base = card->port;
-	int i, j, left;
-
-	dp = config->data;
-	left = config->len;
-	if (left) {
-		b1_put_byte(base, SEND_CONFIG);
-		b1_put_word(base, 1);
-		b1_put_byte(base, SEND_CONFIG);
-		b1_put_word(base, left);
-	}
-	while (left > FWBUF_SIZE) {
-		if (config->user) {
-			if (copy_from_user(buf, dp, FWBUF_SIZE))
-				return -EFAULT;
-		} else {
-			memcpy(buf, dp, FWBUF_SIZE);
-		}
-		for (i = 0; i < FWBUF_SIZE; ) {
-			b1_put_byte(base, SEND_CONFIG);
-			for (j = 0; j < 4; j++) {
-				b1_put_byte(base, buf[i++]);
-			}
-		}
-		left -= FWBUF_SIZE;
-		dp += FWBUF_SIZE;
-	}
-	if (left) {
-		if (config->user) {
-			if (copy_from_user(buf, dp, left))
-				return -EFAULT;
-		} else {
-			memcpy(buf, dp, left);
-		}
-		for (i = 0; i < left; ) {
-			b1_put_byte(base, SEND_CONFIG);
-			for (j = 0; j < 4; j++) {
-				if (i < left)
-					b1_put_byte(base, buf[i++]);
-				else
-					b1_put_byte(base, 0);
-			}
-		}
-	}
-	return 0;
-}
-
-int b1_loaded(avmcard *card)
-{
-	unsigned int base = card->port;
-	unsigned long stop;
-	unsigned char ans;
-	unsigned long tout = 2;
-
-	for (stop = jiffies + tout * HZ; time_before(jiffies, stop);) {
-		if (b1_tx_empty(base))
-			break;
-	}
-	if (!b1_tx_empty(base)) {
-		printk(KERN_ERR "%s: b1_loaded: tx err, corrupted t4 file ?\n",
-		       card->name);
-		return 0;
-	}
-	b1_put_byte(base, SEND_POLL);
-	for (stop = jiffies + tout * HZ; time_before(jiffies, stop);) {
-		if (b1_rx_full(base)) {
-			if ((ans = b1_get_byte(base)) == RECEIVE_POLL) {
-				return 1;
-			}
-			printk(KERN_ERR "%s: b1_loaded: got 0x%x, firmware not running\n",
-			       card->name, ans);
-			return 0;
-		}
-	}
-	printk(KERN_ERR "%s: b1_loaded: firmware not running\n", card->name);
-	return 0;
-}
-
-/* ------------------------------------------------------------- */
-
-int b1_load_firmware(struct capi_ctr *ctrl, capiloaddata *data)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-	avmcard *card = cinfo->card;
-	unsigned int port = card->port;
-	unsigned long flags;
-	int retval;
-
-	b1_reset(port);
-
-	if ((retval = b1_load_t4file(card, &data->firmware))) {
-		b1_reset(port);
-		printk(KERN_ERR "%s: failed to load t4file!!\n",
-		       card->name);
-		return retval;
-	}
-
-	b1_disable_irq(port);
-
-	if (data->configuration.len > 0 && data->configuration.data) {
-		if ((retval = b1_load_config(card, &data->configuration))) {
-			b1_reset(port);
-			printk(KERN_ERR "%s: failed to load config!!\n",
-			       card->name);
-			return retval;
-		}
-	}
-
-	if (!b1_loaded(card)) {
-		printk(KERN_ERR "%s: failed to load t4file.\n", card->name);
-		return -EIO;
-	}
-
-	spin_lock_irqsave(&card->lock, flags);
-	b1_setinterrupt(port, card->irq, card->cardtype);
-	b1_put_byte(port, SEND_INIT);
-	b1_put_word(port, CAPI_MAXAPPL);
-	b1_put_word(port, AVM_NCCI_PER_CHANNEL * 2);
-	b1_put_word(port, ctrl->cnr - 1);
-	spin_unlock_irqrestore(&card->lock, flags);
-
-	return 0;
-}
-
-void b1_reset_ctr(struct capi_ctr *ctrl)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-	avmcard *card = cinfo->card;
-	unsigned int port = card->port;
-	unsigned long flags;
-
-	b1_reset(port);
-	b1_reset(port);
-
-	memset(cinfo->version, 0, sizeof(cinfo->version));
-	spin_lock_irqsave(&card->lock, flags);
-	capilib_release(&cinfo->ncci_head);
-	spin_unlock_irqrestore(&card->lock, flags);
-	capi_ctr_down(ctrl);
-}
-
-void b1_register_appl(struct capi_ctr *ctrl,
-		      u16 appl,
-		      capi_register_params *rp)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-	avmcard *card = cinfo->card;
-	unsigned int port = card->port;
-	unsigned long flags;
-	int nconn, want = rp->level3cnt;
-
-	if (want > 0) nconn = want;
-	else nconn = ctrl->profile.nbchannel * -want;
-	if (nconn == 0) nconn = ctrl->profile.nbchannel;
-
-	spin_lock_irqsave(&card->lock, flags);
-	b1_put_byte(port, SEND_REGISTER);
-	b1_put_word(port, appl);
-	b1_put_word(port, 1024 * (nconn + 1));
-	b1_put_word(port, nconn);
-	b1_put_word(port, rp->datablkcnt);
-	b1_put_word(port, rp->datablklen);
-	spin_unlock_irqrestore(&card->lock, flags);
-}
-
-void b1_release_appl(struct capi_ctr *ctrl, u16 appl)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-	avmcard *card = cinfo->card;
-	unsigned int port = card->port;
-	unsigned long flags;
-
-	spin_lock_irqsave(&card->lock, flags);
-	capilib_release_appl(&cinfo->ncci_head, appl);
-	b1_put_byte(port, SEND_RELEASE);
-	b1_put_word(port, appl);
-	spin_unlock_irqrestore(&card->lock, flags);
-}
-
-u16 b1_send_message(struct capi_ctr *ctrl, struct sk_buff *skb)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-	avmcard *card = cinfo->card;
-	unsigned int port = card->port;
-	unsigned long flags;
-	u16 len = CAPIMSG_LEN(skb->data);
-	u8 cmd = CAPIMSG_COMMAND(skb->data);
-	u8 subcmd = CAPIMSG_SUBCOMMAND(skb->data);
-	u16 dlen, retval;
-
-	spin_lock_irqsave(&card->lock, flags);
-	if (CAPICMD(cmd, subcmd) == CAPI_DATA_B3_REQ) {
-		retval = capilib_data_b3_req(&cinfo->ncci_head,
-					     CAPIMSG_APPID(skb->data),
-					     CAPIMSG_NCCI(skb->data),
-					     CAPIMSG_MSGID(skb->data));
-		if (retval != CAPI_NOERROR) {
-			spin_unlock_irqrestore(&card->lock, flags);
-			return retval;
-		}
-
-		dlen = CAPIMSG_DATALEN(skb->data);
-
-		b1_put_byte(port, SEND_DATA_B3_REQ);
-		b1_put_slice(port, skb->data, len);
-		b1_put_slice(port, skb->data + len, dlen);
-	} else {
-		b1_put_byte(port, SEND_MESSAGE);
-		b1_put_slice(port, skb->data, len);
-	}
-	spin_unlock_irqrestore(&card->lock, flags);
-
-	dev_kfree_skb_any(skb);
-	return CAPI_NOERROR;
-}
-
-/* ------------------------------------------------------------- */
-
-void b1_parse_version(avmctrl_info *cinfo)
-{
-	struct capi_ctr *ctrl = &cinfo->capi_ctrl;
-	avmcard *card = cinfo->card;
-	capi_profile *profp;
-	u8 *dversion;
-	u8 flag;
-	int i, j;
-
-	for (j = 0; j < AVM_MAXVERSION; j++)
-		cinfo->version[j] = "";
-	for (i = 0, j = 0;
-	     j < AVM_MAXVERSION && i < cinfo->versionlen;
-	     j++, i += cinfo->versionbuf[i] + 1)
-		cinfo->version[j] = &cinfo->versionbuf[i + 1];
-
-	strlcpy(ctrl->serial, cinfo->version[VER_SERIAL], sizeof(ctrl->serial));
-	memcpy(&ctrl->profile, cinfo->version[VER_PROFILE], sizeof(capi_profile));
-	strlcpy(ctrl->manu, "AVM GmbH", sizeof(ctrl->manu));
-	dversion = cinfo->version[VER_DRIVER];
-	ctrl->version.majorversion = 2;
-	ctrl->version.minorversion = 0;
-	ctrl->version.majormanuversion = (((dversion[0] - '0') & 0xf) << 4);
-	ctrl->version.majormanuversion |= ((dversion[2] - '0') & 0xf);
-	ctrl->version.minormanuversion = (dversion[3] - '0') << 4;
-	ctrl->version.minormanuversion |=
-		(dversion[5] - '0') * 10 + ((dversion[6] - '0') & 0xf);
-
-	profp = &ctrl->profile;
-
-	flag = ((u8 *)(profp->manu))[1];
-	switch (flag) {
-	case 0: if (cinfo->version[VER_CARDTYPE])
-			strcpy(cinfo->cardname, cinfo->version[VER_CARDTYPE]);
-		else strcpy(cinfo->cardname, "B1");
-		break;
-	case 3: strcpy(cinfo->cardname, "PCMCIA B"); break;
-	case 4: strcpy(cinfo->cardname, "PCMCIA M1"); break;
-	case 5: strcpy(cinfo->cardname, "PCMCIA M2"); break;
-	case 6: strcpy(cinfo->cardname, "B1 V3.0"); break;
-	case 7: strcpy(cinfo->cardname, "B1 PCI"); break;
-	default: sprintf(cinfo->cardname, "AVM?%u", (unsigned int)flag); break;
-	}
-	printk(KERN_NOTICE "%s: card %d \"%s\" ready.\n",
-	       card->name, ctrl->cnr, cinfo->cardname);
-
-	flag = ((u8 *)(profp->manu))[3];
-	if (flag)
-		printk(KERN_NOTICE "%s: card %d Protocol:%s%s%s%s%s%s%s\n",
-		       card->name,
-		       ctrl->cnr,
-		       (flag & 0x01) ? " DSS1" : "",
-		       (flag & 0x02) ? " CT1" : "",
-		       (flag & 0x04) ? " VN3" : "",
-		       (flag & 0x08) ? " NI1" : "",
-		       (flag & 0x10) ? " AUSTEL" : "",
-		       (flag & 0x20) ? " ESS" : "",
-		       (flag & 0x40) ? " 1TR6" : ""
-			);
-
-	flag = ((u8 *)(profp->manu))[5];
-	if (flag)
-		printk(KERN_NOTICE "%s: card %d Linetype:%s%s%s%s\n",
-		       card->name,
-		       ctrl->cnr,
-		       (flag & 0x01) ? " point to point" : "",
-		       (flag & 0x02) ? " point to multipoint" : "",
-		       (flag & 0x08) ? " leased line without D-channel" : "",
-		       (flag & 0x04) ? " leased line with D-channel" : ""
-			);
-}
-
-/* ------------------------------------------------------------- */
-
-irqreturn_t b1_interrupt(int interrupt, void *devptr)
-{
-	avmcard *card = devptr;
-	avmctrl_info *cinfo = &card->ctrlinfo[0];
-	struct capi_ctr *ctrl = &cinfo->capi_ctrl;
-	unsigned char b1cmd;
-	struct sk_buff *skb;
-
-	unsigned ApplId;
-	unsigned MsgLen;
-	unsigned DataB3Len;
-	unsigned NCCI;
-	unsigned WindowSize;
-	unsigned long flags;
-
-	spin_lock_irqsave(&card->lock, flags);
-
-	if (!b1_rx_full(card->port)) {
-		spin_unlock_irqrestore(&card->lock, flags);
-		return IRQ_NONE;
-	}
-
-	b1cmd = b1_get_byte(card->port);
-
-	switch (b1cmd) {
-
-	case RECEIVE_DATA_B3_IND:
-
-		ApplId = (unsigned) b1_get_word(card->port);
-		MsgLen = b1_get_slice(card->port, card->msgbuf);
-		DataB3Len = b1_get_slice(card->port, card->databuf);
-		spin_unlock_irqrestore(&card->lock, flags);
-
-		if (MsgLen < 30) { /* not CAPI 64Bit */
-			memset(card->msgbuf + MsgLen, 0, 30-MsgLen);
-			MsgLen = 30;
-			CAPIMSG_SETLEN(card->msgbuf, 30);
-		}
-		if (!(skb = alloc_skb(DataB3Len + MsgLen, GFP_ATOMIC))) {
-			printk(KERN_ERR "%s: incoming packet dropped\n",
-			       card->name);
-		} else {
-			skb_put_data(skb, card->msgbuf, MsgLen);
-			skb_put_data(skb, card->databuf, DataB3Len);
-			capi_ctr_handle_message(ctrl, ApplId, skb);
-		}
-		break;
-
-	case RECEIVE_MESSAGE:
-
-		ApplId = (unsigned) b1_get_word(card->port);
-		MsgLen = b1_get_slice(card->port, card->msgbuf);
-		if (!(skb = alloc_skb(MsgLen, GFP_ATOMIC))) {
-			printk(KERN_ERR "%s: incoming packet dropped\n",
-			       card->name);
-			spin_unlock_irqrestore(&card->lock, flags);
-		} else {
-			skb_put_data(skb, card->msgbuf, MsgLen);
-			if (CAPIMSG_CMD(skb->data) == CAPI_DATA_B3_CONF)
-				capilib_data_b3_conf(&cinfo->ncci_head, ApplId,
-						     CAPIMSG_NCCI(skb->data),
-						     CAPIMSG_MSGID(skb->data));
-			spin_unlock_irqrestore(&card->lock, flags);
-			capi_ctr_handle_message(ctrl, ApplId, skb);
-		}
-		break;
-
-	case RECEIVE_NEW_NCCI:
-
-		ApplId = b1_get_word(card->port);
-		NCCI = b1_get_word(card->port);
-		WindowSize = b1_get_word(card->port);
-		capilib_new_ncci(&cinfo->ncci_head, ApplId, NCCI, WindowSize);
-		spin_unlock_irqrestore(&card->lock, flags);
-		break;
-
-	case RECEIVE_FREE_NCCI:
-
-		ApplId = b1_get_word(card->port);
-		NCCI = b1_get_word(card->port);
-		if (NCCI != 0xffffffff)
-			capilib_free_ncci(&cinfo->ncci_head, ApplId, NCCI);
-		spin_unlock_irqrestore(&card->lock, flags);
-		break;
-
-	case RECEIVE_START:
-		/* b1_put_byte(card->port, SEND_POLLACK); */
-		spin_unlock_irqrestore(&card->lock, flags);
-		capi_ctr_resume_output(ctrl);
-		break;
-
-	case RECEIVE_STOP:
-		spin_unlock_irqrestore(&card->lock, flags);
-		capi_ctr_suspend_output(ctrl);
-		break;
-
-	case RECEIVE_INIT:
-
-		cinfo->versionlen = b1_get_slice(card->port, cinfo->versionbuf);
-		spin_unlock_irqrestore(&card->lock, flags);
-		b1_parse_version(cinfo);
-		printk(KERN_INFO "%s: %s-card (%s) now active\n",
-		       card->name,
-		       cinfo->version[VER_CARDTYPE],
-		       cinfo->version[VER_DRIVER]);
-		capi_ctr_ready(ctrl);
-		break;
-
-	case RECEIVE_TASK_READY:
-		ApplId = (unsigned) b1_get_word(card->port);
-		MsgLen = b1_get_slice(card->port, card->msgbuf);
-		spin_unlock_irqrestore(&card->lock, flags);
-		card->msgbuf[MsgLen] = 0;
-		while (MsgLen > 0
-		       && (card->msgbuf[MsgLen - 1] == '\n'
-			   || card->msgbuf[MsgLen - 1] == '\r')) {
-			card->msgbuf[MsgLen - 1] = 0;
-			MsgLen--;
-		}
-		printk(KERN_INFO "%s: task %d \"%s\" ready.\n",
-		       card->name, ApplId, card->msgbuf);
-		break;
-
-	case RECEIVE_DEBUGMSG:
-		MsgLen = b1_get_slice(card->port, card->msgbuf);
-		spin_unlock_irqrestore(&card->lock, flags);
-		card->msgbuf[MsgLen] = 0;
-		while (MsgLen > 0
-		       && (card->msgbuf[MsgLen - 1] == '\n'
-			   || card->msgbuf[MsgLen - 1] == '\r')) {
-			card->msgbuf[MsgLen - 1] = 0;
-			MsgLen--;
-		}
-		printk(KERN_INFO "%s: DEBUG: %s\n", card->name, card->msgbuf);
-		break;
-
-	case 0xff:
-		spin_unlock_irqrestore(&card->lock, flags);
-		printk(KERN_ERR "%s: card removed ?\n", card->name);
-		return IRQ_NONE;
-	default:
-		spin_unlock_irqrestore(&card->lock, flags);
-		printk(KERN_ERR "%s: b1_interrupt: 0x%x ???\n",
-		       card->name, b1cmd);
-		return IRQ_HANDLED;
-	}
-	return IRQ_HANDLED;
-}
-
-/* ------------------------------------------------------------- */
-int b1_proc_show(struct seq_file *m, void *v)
-{
-	struct capi_ctr *ctrl = m->private;
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-	avmcard *card = cinfo->card;
-	u8 flag;
-	char *s;
-
-	seq_printf(m, "%-16s %s\n", "name", card->name);
-	seq_printf(m, "%-16s 0x%x\n", "io", card->port);
-	seq_printf(m, "%-16s %d\n", "irq", card->irq);
-	switch (card->cardtype) {
-	case avm_b1isa: s = "B1 ISA"; break;
-	case avm_b1pci: s = "B1 PCI"; break;
-	case avm_b1pcmcia: s = "B1 PCMCIA"; break;
-	case avm_m1: s = "M1"; break;
-	case avm_m2: s = "M2"; break;
-	case avm_t1isa: s = "T1 ISA (HEMA)"; break;
-	case avm_t1pci: s = "T1 PCI"; break;
-	case avm_c4: s = "C4"; break;
-	case avm_c2: s = "C2"; break;
-	default: s = "???"; break;
-	}
-	seq_printf(m, "%-16s %s\n", "type", s);
-	if (card->cardtype == avm_t1isa)
-		seq_printf(m, "%-16s %d\n", "cardnr", card->cardnr);
-	if ((s = cinfo->version[VER_DRIVER]) != NULL)
-		seq_printf(m, "%-16s %s\n", "ver_driver", s);
-	if ((s = cinfo->version[VER_CARDTYPE]) != NULL)
-		seq_printf(m, "%-16s %s\n", "ver_cardtype", s);
-	if ((s = cinfo->version[VER_SERIAL]) != NULL)
-		seq_printf(m, "%-16s %s\n", "ver_serial", s);
-
-	if (card->cardtype != avm_m1) {
-		flag = ((u8 *)(ctrl->profile.manu))[3];
-		if (flag)
-			seq_printf(m, "%-16s%s%s%s%s%s%s%s\n",
-				   "protocol",
-				   (flag & 0x01) ? " DSS1" : "",
-				   (flag & 0x02) ? " CT1" : "",
-				   (flag & 0x04) ? " VN3" : "",
-				   (flag & 0x08) ? " NI1" : "",
-				   (flag & 0x10) ? " AUSTEL" : "",
-				   (flag & 0x20) ? " ESS" : "",
-				   (flag & 0x40) ? " 1TR6" : ""
-				);
-	}
-	if (card->cardtype != avm_m1) {
-		flag = ((u8 *)(ctrl->profile.manu))[5];
-		if (flag)
-			seq_printf(m, "%-16s%s%s%s%s\n",
-				   "linetype",
-				   (flag & 0x01) ? " point to point" : "",
-				   (flag & 0x02) ? " point to multipoint" : "",
-				   (flag & 0x08) ? " leased line without D-channel" : "",
-				   (flag & 0x04) ? " leased line with D-channel" : ""
-				);
-	}
-	seq_printf(m, "%-16s %s\n", "cardname", cinfo->cardname);
-
-	return 0;
-}
-EXPORT_SYMBOL(b1_proc_show);
-
-/* ------------------------------------------------------------- */
-
-#ifdef CONFIG_PCI
-
-avmcard_dmainfo *
-avmcard_dma_alloc(char *name, struct pci_dev *pdev, long rsize, long ssize)
-{
-	avmcard_dmainfo *p;
-	void *buf;
-
-	p = kzalloc(sizeof(avmcard_dmainfo), GFP_KERNEL);
-	if (!p) {
-		printk(KERN_WARNING "%s: no memory.\n", name);
-		goto err;
-	}
-
-	p->recvbuf.size = rsize;
-	buf = pci_alloc_consistent(pdev, rsize, &p->recvbuf.dmaaddr);
-	if (!buf) {
-		printk(KERN_WARNING "%s: allocation of receive dma buffer failed.\n", name);
-		goto err_kfree;
-	}
-	p->recvbuf.dmabuf = buf;
-
-	p->sendbuf.size = ssize;
-	buf = pci_alloc_consistent(pdev, ssize, &p->sendbuf.dmaaddr);
-	if (!buf) {
-		printk(KERN_WARNING "%s: allocation of send dma buffer failed.\n", name);
-		goto err_free_consistent;
-	}
-
-	p->sendbuf.dmabuf = buf;
-	skb_queue_head_init(&p->send_queue);
-
-	return p;
-
-err_free_consistent:
-	pci_free_consistent(p->pcidev, p->recvbuf.size,
-			    p->recvbuf.dmabuf, p->recvbuf.dmaaddr);
-err_kfree:
-	kfree(p);
-err:
-	return NULL;
-}
-
-void avmcard_dma_free(avmcard_dmainfo *p)
-{
-	pci_free_consistent(p->pcidev, p->recvbuf.size,
-			    p->recvbuf.dmabuf, p->recvbuf.dmaaddr);
-	pci_free_consistent(p->pcidev, p->sendbuf.size,
-			    p->sendbuf.dmabuf, p->sendbuf.dmaaddr);
-	skb_queue_purge(&p->send_queue);
-	kfree(p);
-}
-
-EXPORT_SYMBOL(avmcard_dma_alloc);
-EXPORT_SYMBOL(avmcard_dma_free);
-
-#endif
-
-EXPORT_SYMBOL(b1_irq_table);
-
-EXPORT_SYMBOL(b1_alloc_card);
-EXPORT_SYMBOL(b1_free_card);
-EXPORT_SYMBOL(b1_detect);
-EXPORT_SYMBOL(b1_getrevision);
-EXPORT_SYMBOL(b1_load_t4file);
-EXPORT_SYMBOL(b1_load_config);
-EXPORT_SYMBOL(b1_loaded);
-EXPORT_SYMBOL(b1_load_firmware);
-EXPORT_SYMBOL(b1_reset_ctr);
-EXPORT_SYMBOL(b1_register_appl);
-EXPORT_SYMBOL(b1_release_appl);
-EXPORT_SYMBOL(b1_send_message);
-
-EXPORT_SYMBOL(b1_parse_version);
-EXPORT_SYMBOL(b1_interrupt);
-
-static int __init b1_init(void)
-{
-	char *p;
-	char rev[32];
-
-	if ((p = strchr(revision, ':')) != NULL && p[1]) {
-		strlcpy(rev, p + 2, 32);
-		if ((p = strchr(rev, '$')) != NULL && p > rev)
-			*(p - 1) = 0;
-	} else
-		strcpy(rev, "1.0");
-
-	printk(KERN_INFO "b1: revision %s\n", rev);
-
-	return 0;
-}
-
-static void __exit b1_exit(void)
-{
-}
-
-module_init(b1_init);
-module_exit(b1_exit);
diff --git a/drivers/staging/isdn/avm/b1dma.c b/drivers/staging/isdn/avm/b1dma.c
deleted file mode 100644
index 6a3dc9937ce5..000000000000
--- a/drivers/staging/isdn/avm/b1dma.c
+++ /dev/null
@@ -1,981 +0,0 @@
-/* $Id: b1dma.c,v 1.1.2.3 2004/02/10 01:07:12 keil Exp $
- *
- * Common module for AVM B1 cards that support dma with AMCC
- *
- * Copyright 2000 by Carsten Paeth <calle@calle.de>
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/skbuff.h>
-#include <linux/delay.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/capi.h>
-#include <linux/kernelcapi.h>
-#include <linux/gfp.h>
-#include <asm/io.h>
-#include <linux/init.h>
-#include <linux/uaccess.h>
-#include <linux/netdevice.h>
-#include <linux/isdn/capilli.h>
-#include "avmcard.h"
-#include <linux/isdn/capicmd.h>
-#include <linux/isdn/capiutil.h>
-
-static char *revision = "$Revision: 1.1.2.3 $";
-
-#undef AVM_B1DMA_DEBUG
-
-/* ------------------------------------------------------------- */
-
-MODULE_DESCRIPTION("CAPI4Linux: DMA support for active AVM cards");
-MODULE_AUTHOR("Carsten Paeth");
-MODULE_LICENSE("GPL");
-
-static bool suppress_pollack = 0;
-module_param(suppress_pollack, bool, 0);
-
-/* ------------------------------------------------------------- */
-
-static void b1dma_dispatch_tx(avmcard *card);
-
-/* ------------------------------------------------------------- */
-
-/* S5933 */
-
-#define	AMCC_RXPTR	0x24
-#define	AMCC_RXLEN	0x28
-#define	AMCC_TXPTR	0x2c
-#define	AMCC_TXLEN	0x30
-
-#define	AMCC_INTCSR	0x38
-#	define EN_READ_TC_INT		0x00008000L
-#	define EN_WRITE_TC_INT		0x00004000L
-#	define EN_TX_TC_INT		EN_READ_TC_INT
-#	define EN_RX_TC_INT		EN_WRITE_TC_INT
-#	define AVM_FLAG			0x30000000L
-
-#	define ANY_S5933_INT		0x00800000L
-#	define READ_TC_INT		0x00080000L
-#	define WRITE_TC_INT		0x00040000L
-#	define	TX_TC_INT		READ_TC_INT
-#	define	RX_TC_INT		WRITE_TC_INT
-#	define MASTER_ABORT_INT		0x00100000L
-#	define TARGET_ABORT_INT		0x00200000L
-#	define BUS_MASTER_INT		0x00200000L
-#	define ALL_INT			0x000C0000L
-
-#define	AMCC_MCSR	0x3c
-#	define A2P_HI_PRIORITY		0x00000100L
-#	define EN_A2P_TRANSFERS		0x00000400L
-#	define P2A_HI_PRIORITY		0x00001000L
-#	define EN_P2A_TRANSFERS		0x00004000L
-#	define RESET_A2P_FLAGS		0x04000000L
-#	define RESET_P2A_FLAGS		0x02000000L
-
-/* ------------------------------------------------------------- */
-
-static inline void b1dma_writel(avmcard *card, u32 value, int off)
-{
-	writel(value, card->mbase + off);
-}
-
-static inline u32 b1dma_readl(avmcard *card, int off)
-{
-	return readl(card->mbase + off);
-}
-
-/* ------------------------------------------------------------- */
-
-static inline int b1dma_tx_empty(unsigned int port)
-{
-	return inb(port + 0x03) & 0x1;
-}
-
-static inline int b1dma_rx_full(unsigned int port)
-{
-	return inb(port + 0x02) & 0x1;
-}
-
-static int b1dma_tolink(avmcard *card, void *buf, unsigned int len)
-{
-	unsigned long stop = jiffies + 1 * HZ;	/* maximum wait time 1 sec */
-	unsigned char *s = (unsigned char *)buf;
-	while (len--) {
-		while (!b1dma_tx_empty(card->port)
-		       && time_before(jiffies, stop));
-		if (!b1dma_tx_empty(card->port))
-			return -1;
-		t1outp(card->port, 0x01, *s++);
-	}
-	return 0;
-}
-
-static int b1dma_fromlink(avmcard *card, void *buf, unsigned int len)
-{
-	unsigned long stop = jiffies + 1 * HZ;	/* maximum wait time 1 sec */
-	unsigned char *s = (unsigned char *)buf;
-	while (len--) {
-		while (!b1dma_rx_full(card->port)
-		       && time_before(jiffies, stop));
-		if (!b1dma_rx_full(card->port))
-			return -1;
-		*s++ = t1inp(card->port, 0x00);
-	}
-	return 0;
-}
-
-static int WriteReg(avmcard *card, u32 reg, u8 val)
-{
-	u8 cmd = 0x00;
-	if (b1dma_tolink(card, &cmd, 1) == 0
-	    && b1dma_tolink(card, &reg, 4) == 0) {
-		u32 tmp = val;
-		return b1dma_tolink(card, &tmp, 4);
-	}
-	return -1;
-}
-
-static u8 ReadReg(avmcard *card, u32 reg)
-{
-	u8 cmd = 0x01;
-	if (b1dma_tolink(card, &cmd, 1) == 0
-	    && b1dma_tolink(card, &reg, 4) == 0) {
-		u32 tmp;
-		if (b1dma_fromlink(card, &tmp, 4) == 0)
-			return (u8)tmp;
-	}
-	return 0xff;
-}
-
-/* ------------------------------------------------------------- */
-
-static inline void _put_byte(void **pp, u8 val)
-{
-	u8 *s = *pp;
-	*s++ = val;
-	*pp = s;
-}
-
-static inline void _put_word(void **pp, u32 val)
-{
-	u8 *s = *pp;
-	*s++ = val & 0xff;
-	*s++ = (val >> 8) & 0xff;
-	*s++ = (val >> 16) & 0xff;
-	*s++ = (val >> 24) & 0xff;
-	*pp = s;
-}
-
-static inline void _put_slice(void **pp, unsigned char *dp, unsigned int len)
-{
-	unsigned i = len;
-	_put_word(pp, i);
-	while (i-- > 0)
-		_put_byte(pp, *dp++);
-}
-
-static inline u8 _get_byte(void **pp)
-{
-	u8 *s = *pp;
-	u8 val;
-	val = *s++;
-	*pp = s;
-	return val;
-}
-
-static inline u32 _get_word(void **pp)
-{
-	u8 *s = *pp;
-	u32 val;
-	val = *s++;
-	val |= (*s++ << 8);
-	val |= (*s++ << 16);
-	val |= (*s++ << 24);
-	*pp = s;
-	return val;
-}
-
-static inline u32 _get_slice(void **pp, unsigned char *dp)
-{
-	unsigned int len, i;
-
-	len = i = _get_word(pp);
-	while (i-- > 0) *dp++ = _get_byte(pp);
-	return len;
-}
-
-/* ------------------------------------------------------------- */
-
-void b1dma_reset(avmcard *card)
-{
-	card->csr = 0x0;
-	b1dma_writel(card, card->csr, AMCC_INTCSR);
-	b1dma_writel(card, 0, AMCC_MCSR);
-	b1dma_writel(card, 0, AMCC_RXLEN);
-	b1dma_writel(card, 0, AMCC_TXLEN);
-
-	t1outp(card->port, 0x10, 0x00);
-	t1outp(card->port, 0x07, 0x00);
-
-	b1dma_writel(card, 0, AMCC_MCSR);
-	mdelay(10);
-	b1dma_writel(card, 0x0f000000, AMCC_MCSR); /* reset all */
-	mdelay(10);
-	b1dma_writel(card, 0, AMCC_MCSR);
-	if (card->cardtype == avm_t1pci)
-		mdelay(42);
-	else
-		mdelay(10);
-}
-
-/* ------------------------------------------------------------- */
-
-static int b1dma_detect(avmcard *card)
-{
-	b1dma_writel(card, 0, AMCC_MCSR);
-	mdelay(10);
-	b1dma_writel(card, 0x0f000000, AMCC_MCSR); /* reset all */
-	mdelay(10);
-	b1dma_writel(card, 0, AMCC_MCSR);
-	mdelay(42);
-
-	b1dma_writel(card, 0, AMCC_RXLEN);
-	b1dma_writel(card, 0, AMCC_TXLEN);
-	card->csr = 0x0;
-	b1dma_writel(card, card->csr, AMCC_INTCSR);
-
-	if (b1dma_readl(card, AMCC_MCSR) != 0x000000E6)
-		return 1;
-
-	b1dma_writel(card, 0xffffffff, AMCC_RXPTR);
-	b1dma_writel(card, 0xffffffff, AMCC_TXPTR);
-	if (b1dma_readl(card, AMCC_RXPTR) != 0xfffffffc
-	    || b1dma_readl(card, AMCC_TXPTR) != 0xfffffffc)
-		return 2;
-
-	b1dma_writel(card, 0x0, AMCC_RXPTR);
-	b1dma_writel(card, 0x0, AMCC_TXPTR);
-	if (b1dma_readl(card, AMCC_RXPTR) != 0x0
-	    || b1dma_readl(card, AMCC_TXPTR) != 0x0)
-		return 3;
-
-	t1outp(card->port, 0x10, 0x00);
-	t1outp(card->port, 0x07, 0x00);
-
-	t1outp(card->port, 0x02, 0x02);
-	t1outp(card->port, 0x03, 0x02);
-
-	if ((t1inp(card->port, 0x02) & 0xFE) != 0x02
-	    || t1inp(card->port, 0x3) != 0x03)
-		return 4;
-
-	t1outp(card->port, 0x02, 0x00);
-	t1outp(card->port, 0x03, 0x00);
-
-	if ((t1inp(card->port, 0x02) & 0xFE) != 0x00
-	    || t1inp(card->port, 0x3) != 0x01)
-		return 5;
-
-	return 0;
-}
-
-int t1pci_detect(avmcard *card)
-{
-	int ret;
-
-	if ((ret = b1dma_detect(card)) != 0)
-		return ret;
-
-	/* Transputer test */
-
-	if (WriteReg(card, 0x80001000, 0x11) != 0
-	    || WriteReg(card, 0x80101000, 0x22) != 0
-	    || WriteReg(card, 0x80201000, 0x33) != 0
-	    || WriteReg(card, 0x80301000, 0x44) != 0)
-		return 6;
-
-	if (ReadReg(card, 0x80001000) != 0x11
-	    || ReadReg(card, 0x80101000) != 0x22
-	    || ReadReg(card, 0x80201000) != 0x33
-	    || ReadReg(card, 0x80301000) != 0x44)
-		return 7;
-
-	if (WriteReg(card, 0x80001000, 0x55) != 0
-	    || WriteReg(card, 0x80101000, 0x66) != 0
-	    || WriteReg(card, 0x80201000, 0x77) != 0
-	    || WriteReg(card, 0x80301000, 0x88) != 0)
-		return 8;
-
-	if (ReadReg(card, 0x80001000) != 0x55
-	    || ReadReg(card, 0x80101000) != 0x66
-	    || ReadReg(card, 0x80201000) != 0x77
-	    || ReadReg(card, 0x80301000) != 0x88)
-		return 9;
-
-	return 0;
-}
-
-int b1pciv4_detect(avmcard *card)
-{
-	int ret, i;
-
-	if ((ret = b1dma_detect(card)) != 0)
-		return ret;
-
-	for (i = 0; i < 5; i++) {
-		if (WriteReg(card, 0x80A00000, 0x21) != 0)
-			return 6;
-		if ((ReadReg(card, 0x80A00000) & 0x01) != 0x01)
-			return 7;
-	}
-	for (i = 0; i < 5; i++) {
-		if (WriteReg(card, 0x80A00000, 0x20) != 0)
-			return 8;
-		if ((ReadReg(card, 0x80A00000) & 0x01) != 0x00)
-			return 9;
-	}
-
-	return 0;
-}
-
-static void b1dma_queue_tx(avmcard *card, struct sk_buff *skb)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&card->lock, flags);
-
-	skb_queue_tail(&card->dma->send_queue, skb);
-
-	if (!(card->csr & EN_TX_TC_INT)) {
-		b1dma_dispatch_tx(card);
-		b1dma_writel(card, card->csr, AMCC_INTCSR);
-	}
-
-	spin_unlock_irqrestore(&card->lock, flags);
-}
-
-/* ------------------------------------------------------------- */
-
-static void b1dma_dispatch_tx(avmcard *card)
-{
-	avmcard_dmainfo *dma = card->dma;
-	struct sk_buff *skb;
-	u8 cmd, subcmd;
-	u16 len;
-	u32 txlen;
-	void *p;
-
-	skb = skb_dequeue(&dma->send_queue);
-
-	len = CAPIMSG_LEN(skb->data);
-
-	if (len) {
-		cmd = CAPIMSG_COMMAND(skb->data);
-		subcmd = CAPIMSG_SUBCOMMAND(skb->data);
-
-		p = dma->sendbuf.dmabuf;
-
-		if (CAPICMD(cmd, subcmd) == CAPI_DATA_B3_REQ) {
-			u16 dlen = CAPIMSG_DATALEN(skb->data);
-			_put_byte(&p, SEND_DATA_B3_REQ);
-			_put_slice(&p, skb->data, len);
-			_put_slice(&p, skb->data + len, dlen);
-		} else {
-			_put_byte(&p, SEND_MESSAGE);
-			_put_slice(&p, skb->data, len);
-		}
-		txlen = (u8 *)p - (u8 *)dma->sendbuf.dmabuf;
-#ifdef AVM_B1DMA_DEBUG
-		printk(KERN_DEBUG "tx: put msg len=%d\n", txlen);
-#endif
-	} else {
-		txlen = skb->len - 2;
-#ifdef AVM_B1DMA_POLLDEBUG
-		if (skb->data[2] == SEND_POLLACK)
-			printk(KERN_INFO "%s: send ack\n", card->name);
-#endif
-#ifdef AVM_B1DMA_DEBUG
-		printk(KERN_DEBUG "tx: put 0x%x len=%d\n",
-		       skb->data[2], txlen);
-#endif
-		skb_copy_from_linear_data_offset(skb, 2, dma->sendbuf.dmabuf,
-						 skb->len - 2);
-	}
-	txlen = (txlen + 3) & ~3;
-
-	b1dma_writel(card, dma->sendbuf.dmaaddr, AMCC_TXPTR);
-	b1dma_writel(card, txlen, AMCC_TXLEN);
-
-	card->csr |= EN_TX_TC_INT;
-
-	dev_kfree_skb_any(skb);
-}
-
-/* ------------------------------------------------------------- */
-
-static void queue_pollack(avmcard *card)
-{
-	struct sk_buff *skb;
-	void *p;
-
-	skb = alloc_skb(3, GFP_ATOMIC);
-	if (!skb) {
-		printk(KERN_CRIT "%s: no memory, lost poll ack\n",
-		       card->name);
-		return;
-	}
-	p = skb->data;
-	_put_byte(&p, 0);
-	_put_byte(&p, 0);
-	_put_byte(&p, SEND_POLLACK);
-	skb_put(skb, (u8 *)p - (u8 *)skb->data);
-
-	b1dma_queue_tx(card, skb);
-}
-
-/* ------------------------------------------------------------- */
-
-static void b1dma_handle_rx(avmcard *card)
-{
-	avmctrl_info *cinfo = &card->ctrlinfo[0];
-	avmcard_dmainfo *dma = card->dma;
-	struct capi_ctr *ctrl = &cinfo->capi_ctrl;
-	struct sk_buff *skb;
-	void *p = dma->recvbuf.dmabuf + 4;
-	u32 ApplId, MsgLen, DataB3Len, NCCI, WindowSize;
-	u8 b1cmd =  _get_byte(&p);
-
-#ifdef AVM_B1DMA_DEBUG
-	printk(KERN_DEBUG "rx: 0x%x %lu\n", b1cmd, (unsigned long)dma->recvlen);
-#endif
-
-	switch (b1cmd) {
-	case RECEIVE_DATA_B3_IND:
-
-		ApplId = (unsigned) _get_word(&p);
-		MsgLen = _get_slice(&p, card->msgbuf);
-		DataB3Len = _get_slice(&p, card->databuf);
-
-		if (MsgLen < 30) { /* not CAPI 64Bit */
-			memset(card->msgbuf + MsgLen, 0, 30 - MsgLen);
-			MsgLen = 30;
-			CAPIMSG_SETLEN(card->msgbuf, 30);
-		}
-		if (!(skb = alloc_skb(DataB3Len + MsgLen, GFP_ATOMIC))) {
-			printk(KERN_ERR "%s: incoming packet dropped\n",
-			       card->name);
-		} else {
-			skb_put_data(skb, card->msgbuf, MsgLen);
-			skb_put_data(skb, card->databuf, DataB3Len);
-			capi_ctr_handle_message(ctrl, ApplId, skb);
-		}
-		break;
-
-	case RECEIVE_MESSAGE:
-
-		ApplId = (unsigned) _get_word(&p);
-		MsgLen = _get_slice(&p, card->msgbuf);
-		if (!(skb = alloc_skb(MsgLen, GFP_ATOMIC))) {
-			printk(KERN_ERR "%s: incoming packet dropped\n",
-			       card->name);
-		} else {
-			skb_put_data(skb, card->msgbuf, MsgLen);
-			if (CAPIMSG_CMD(skb->data) == CAPI_DATA_B3_CONF) {
-				spin_lock(&card->lock);
-				capilib_data_b3_conf(&cinfo->ncci_head, ApplId,
-						     CAPIMSG_NCCI(skb->data),
-						     CAPIMSG_MSGID(skb->data));
-				spin_unlock(&card->lock);
-			}
-			capi_ctr_handle_message(ctrl, ApplId, skb);
-		}
-		break;
-
-	case RECEIVE_NEW_NCCI:
-
-		ApplId = _get_word(&p);
-		NCCI = _get_word(&p);
-		WindowSize = _get_word(&p);
-		spin_lock(&card->lock);
-		capilib_new_ncci(&cinfo->ncci_head, ApplId, NCCI, WindowSize);
-		spin_unlock(&card->lock);
-		break;
-
-	case RECEIVE_FREE_NCCI:
-
-		ApplId = _get_word(&p);
-		NCCI = _get_word(&p);
-
-		if (NCCI != 0xffffffff) {
-			spin_lock(&card->lock);
-			capilib_free_ncci(&cinfo->ncci_head, ApplId, NCCI);
-			spin_unlock(&card->lock);
-		}
-		break;
-
-	case RECEIVE_START:
-#ifdef AVM_B1DMA_POLLDEBUG
-		printk(KERN_INFO "%s: receive poll\n", card->name);
-#endif
-		if (!suppress_pollack)
-			queue_pollack(card);
-		capi_ctr_resume_output(ctrl);
-		break;
-
-	case RECEIVE_STOP:
-		capi_ctr_suspend_output(ctrl);
-		break;
-
-	case RECEIVE_INIT:
-
-		cinfo->versionlen = _get_slice(&p, cinfo->versionbuf);
-		b1_parse_version(cinfo);
-		printk(KERN_INFO "%s: %s-card (%s) now active\n",
-		       card->name,
-		       cinfo->version[VER_CARDTYPE],
-		       cinfo->version[VER_DRIVER]);
-		capi_ctr_ready(ctrl);
-		break;
-
-	case RECEIVE_TASK_READY:
-		ApplId = (unsigned) _get_word(&p);
-		MsgLen = _get_slice(&p, card->msgbuf);
-		card->msgbuf[MsgLen] = 0;
-		while (MsgLen > 0
-		       && (card->msgbuf[MsgLen - 1] == '\n'
-			   || card->msgbuf[MsgLen - 1] == '\r')) {
-			card->msgbuf[MsgLen - 1] = 0;
-			MsgLen--;
-		}
-		printk(KERN_INFO "%s: task %d \"%s\" ready.\n",
-		       card->name, ApplId, card->msgbuf);
-		break;
-
-	case RECEIVE_DEBUGMSG:
-		MsgLen = _get_slice(&p, card->msgbuf);
-		card->msgbuf[MsgLen] = 0;
-		while (MsgLen > 0
-		       && (card->msgbuf[MsgLen - 1] == '\n'
-			   || card->msgbuf[MsgLen - 1] == '\r')) {
-			card->msgbuf[MsgLen - 1] = 0;
-			MsgLen--;
-		}
-		printk(KERN_INFO "%s: DEBUG: %s\n", card->name, card->msgbuf);
-		break;
-
-	default:
-		printk(KERN_ERR "%s: b1dma_interrupt: 0x%x ???\n",
-		       card->name, b1cmd);
-		return;
-	}
-}
-
-/* ------------------------------------------------------------- */
-
-static void b1dma_handle_interrupt(avmcard *card)
-{
-	u32 status;
-	u32 newcsr;
-
-	spin_lock(&card->lock);
-
-	status = b1dma_readl(card, AMCC_INTCSR);
-	if ((status & ANY_S5933_INT) == 0) {
-		spin_unlock(&card->lock);
-		return;
-	}
-
-	newcsr = card->csr | (status & ALL_INT);
-	if (status & TX_TC_INT) newcsr &= ~EN_TX_TC_INT;
-	if (status & RX_TC_INT) newcsr &= ~EN_RX_TC_INT;
-	b1dma_writel(card, newcsr, AMCC_INTCSR);
-
-	if ((status & RX_TC_INT) != 0) {
-		struct avmcard_dmainfo *dma = card->dma;
-		u32 rxlen;
-		if (card->dma->recvlen == 0) {
-			rxlen = b1dma_readl(card, AMCC_RXLEN);
-			if (rxlen == 0) {
-				dma->recvlen = *((u32 *)dma->recvbuf.dmabuf);
-				rxlen = (dma->recvlen + 3) & ~3;
-				b1dma_writel(card, dma->recvbuf.dmaaddr + 4, AMCC_RXPTR);
-				b1dma_writel(card, rxlen, AMCC_RXLEN);
-#ifdef AVM_B1DMA_DEBUG
-			} else {
-				printk(KERN_ERR "%s: rx not complete (%d).\n",
-				       card->name, rxlen);
-#endif
-			}
-		} else {
-			spin_unlock(&card->lock);
-			b1dma_handle_rx(card);
-			dma->recvlen = 0;
-			spin_lock(&card->lock);
-			b1dma_writel(card, dma->recvbuf.dmaaddr, AMCC_RXPTR);
-			b1dma_writel(card, 4, AMCC_RXLEN);
-		}
-	}
-
-	if ((status & TX_TC_INT) != 0) {
-		if (skb_queue_empty(&card->dma->send_queue))
-			card->csr &= ~EN_TX_TC_INT;
-		else
-			b1dma_dispatch_tx(card);
-	}
-	b1dma_writel(card, card->csr, AMCC_INTCSR);
-
-	spin_unlock(&card->lock);
-}
-
-irqreturn_t b1dma_interrupt(int interrupt, void *devptr)
-{
-	avmcard *card = devptr;
-
-	b1dma_handle_interrupt(card);
-	return IRQ_HANDLED;
-}
-
-/* ------------------------------------------------------------- */
-
-static int b1dma_loaded(avmcard *card)
-{
-	unsigned long stop;
-	unsigned char ans;
-	unsigned long tout = 2;
-	unsigned int base = card->port;
-
-	for (stop = jiffies + tout * HZ; time_before(jiffies, stop);) {
-		if (b1_tx_empty(base))
-			break;
-	}
-	if (!b1_tx_empty(base)) {
-		printk(KERN_ERR "%s: b1dma_loaded: tx err, corrupted t4 file ?\n",
-		       card->name);
-		return 0;
-	}
-	b1_put_byte(base, SEND_POLLACK);
-	for (stop = jiffies + tout * HZ; time_before(jiffies, stop);) {
-		if (b1_rx_full(base)) {
-			if ((ans = b1_get_byte(base)) == RECEIVE_POLLDWORD) {
-				return 1;
-			}
-			printk(KERN_ERR "%s: b1dma_loaded: got 0x%x, firmware not running in dword mode\n", card->name, ans);
-			return 0;
-		}
-	}
-	printk(KERN_ERR "%s: b1dma_loaded: firmware not running\n", card->name);
-	return 0;
-}
-
-/* ------------------------------------------------------------- */
-
-static void b1dma_send_init(avmcard *card)
-{
-	struct sk_buff *skb;
-	void *p;
-
-	skb = alloc_skb(15, GFP_ATOMIC);
-	if (!skb) {
-		printk(KERN_CRIT "%s: no memory, lost register appl.\n",
-		       card->name);
-		return;
-	}
-	p = skb->data;
-	_put_byte(&p, 0);
-	_put_byte(&p, 0);
-	_put_byte(&p, SEND_INIT);
-	_put_word(&p, CAPI_MAXAPPL);
-	_put_word(&p, AVM_NCCI_PER_CHANNEL * 30);
-	_put_word(&p, card->cardnr - 1);
-	skb_put(skb, (u8 *)p - (u8 *)skb->data);
-
-	b1dma_queue_tx(card, skb);
-}
-
-int b1dma_load_firmware(struct capi_ctr *ctrl, capiloaddata *data)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-	avmcard *card = cinfo->card;
-	int retval;
-
-	b1dma_reset(card);
-
-	if ((retval = b1_load_t4file(card, &data->firmware))) {
-		b1dma_reset(card);
-		printk(KERN_ERR "%s: failed to load t4file!!\n",
-		       card->name);
-		return retval;
-	}
-
-	if (data->configuration.len > 0 && data->configuration.data) {
-		if ((retval = b1_load_config(card, &data->configuration))) {
-			b1dma_reset(card);
-			printk(KERN_ERR "%s: failed to load config!!\n",
-			       card->name);
-			return retval;
-		}
-	}
-
-	if (!b1dma_loaded(card)) {
-		b1dma_reset(card);
-		printk(KERN_ERR "%s: failed to load t4file.\n", card->name);
-		return -EIO;
-	}
-
-	card->csr = AVM_FLAG;
-	b1dma_writel(card, card->csr, AMCC_INTCSR);
-	b1dma_writel(card, EN_A2P_TRANSFERS | EN_P2A_TRANSFERS | A2P_HI_PRIORITY |
-		     P2A_HI_PRIORITY | RESET_A2P_FLAGS | RESET_P2A_FLAGS,
-		     AMCC_MCSR);
-	t1outp(card->port, 0x07, 0x30);
-	t1outp(card->port, 0x10, 0xF0);
-
-	card->dma->recvlen = 0;
-	b1dma_writel(card, card->dma->recvbuf.dmaaddr, AMCC_RXPTR);
-	b1dma_writel(card, 4, AMCC_RXLEN);
-	card->csr |= EN_RX_TC_INT;
-	b1dma_writel(card, card->csr, AMCC_INTCSR);
-
-	b1dma_send_init(card);
-
-	return 0;
-}
-
-void b1dma_reset_ctr(struct capi_ctr *ctrl)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-	avmcard *card = cinfo->card;
-	unsigned long flags;
-
-	spin_lock_irqsave(&card->lock, flags);
-	b1dma_reset(card);
-
-	memset(cinfo->version, 0, sizeof(cinfo->version));
-	capilib_release(&cinfo->ncci_head);
-	spin_unlock_irqrestore(&card->lock, flags);
-	capi_ctr_down(ctrl);
-}
-
-/* ------------------------------------------------------------- */
-
-void b1dma_register_appl(struct capi_ctr *ctrl,
-			 u16 appl,
-			 capi_register_params *rp)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-	avmcard *card = cinfo->card;
-	struct sk_buff *skb;
-	int want = rp->level3cnt;
-	int nconn;
-	void *p;
-
-	if (want > 0) nconn = want;
-	else nconn = ctrl->profile.nbchannel * -want;
-	if (nconn == 0) nconn = ctrl->profile.nbchannel;
-
-	skb = alloc_skb(23, GFP_ATOMIC);
-	if (!skb) {
-		printk(KERN_CRIT "%s: no memory, lost register appl.\n",
-		       card->name);
-		return;
-	}
-	p = skb->data;
-	_put_byte(&p, 0);
-	_put_byte(&p, 0);
-	_put_byte(&p, SEND_REGISTER);
-	_put_word(&p, appl);
-	_put_word(&p, 1024 * (nconn + 1));
-	_put_word(&p, nconn);
-	_put_word(&p, rp->datablkcnt);
-	_put_word(&p, rp->datablklen);
-	skb_put(skb, (u8 *)p - (u8 *)skb->data);
-
-	b1dma_queue_tx(card, skb);
-}
-
-/* ------------------------------------------------------------- */
-
-void b1dma_release_appl(struct capi_ctr *ctrl, u16 appl)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-	avmcard *card = cinfo->card;
-	struct sk_buff *skb;
-	void *p;
-	unsigned long flags;
-
-	spin_lock_irqsave(&card->lock, flags);
-	capilib_release_appl(&cinfo->ncci_head, appl);
-	spin_unlock_irqrestore(&card->lock, flags);
-
-	skb = alloc_skb(7, GFP_ATOMIC);
-	if (!skb) {
-		printk(KERN_CRIT "%s: no memory, lost release appl.\n",
-		       card->name);
-		return;
-	}
-	p = skb->data;
-	_put_byte(&p, 0);
-	_put_byte(&p, 0);
-	_put_byte(&p, SEND_RELEASE);
-	_put_word(&p, appl);
-
-	skb_put(skb, (u8 *)p - (u8 *)skb->data);
-
-	b1dma_queue_tx(card, skb);
-}
-
-/* ------------------------------------------------------------- */
-
-u16 b1dma_send_message(struct capi_ctr *ctrl, struct sk_buff *skb)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-	avmcard *card = cinfo->card;
-	u16 retval = CAPI_NOERROR;
-
-	if (CAPIMSG_CMD(skb->data) == CAPI_DATA_B3_REQ) {
-		unsigned long flags;
-		spin_lock_irqsave(&card->lock, flags);
-		retval = capilib_data_b3_req(&cinfo->ncci_head,
-					     CAPIMSG_APPID(skb->data),
-					     CAPIMSG_NCCI(skb->data),
-					     CAPIMSG_MSGID(skb->data));
-		spin_unlock_irqrestore(&card->lock, flags);
-	}
-	if (retval == CAPI_NOERROR)
-		b1dma_queue_tx(card, skb);
-
-	return retval;
-}
-
-/* ------------------------------------------------------------- */
-
-int b1dma_proc_show(struct seq_file *m, void *v)
-{
-	struct capi_ctr *ctrl = m->private;
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-	avmcard *card = cinfo->card;
-	u8 flag;
-	char *s;
-	u32 txoff, txlen, rxoff, rxlen, csr;
-	unsigned long flags;
-
-	seq_printf(m, "%-16s %s\n", "name", card->name);
-	seq_printf(m, "%-16s 0x%x\n", "io", card->port);
-	seq_printf(m, "%-16s %d\n", "irq", card->irq);
-	seq_printf(m, "%-16s 0x%lx\n", "membase", card->membase);
-	switch (card->cardtype) {
-	case avm_b1isa: s = "B1 ISA"; break;
-	case avm_b1pci: s = "B1 PCI"; break;
-	case avm_b1pcmcia: s = "B1 PCMCIA"; break;
-	case avm_m1: s = "M1"; break;
-	case avm_m2: s = "M2"; break;
-	case avm_t1isa: s = "T1 ISA (HEMA)"; break;
-	case avm_t1pci: s = "T1 PCI"; break;
-	case avm_c4: s = "C4"; break;
-	case avm_c2: s = "C2"; break;
-	default: s = "???"; break;
-	}
-	seq_printf(m, "%-16s %s\n", "type", s);
-	if ((s = cinfo->version[VER_DRIVER]) != NULL)
-		seq_printf(m, "%-16s %s\n", "ver_driver", s);
-	if ((s = cinfo->version[VER_CARDTYPE]) != NULL)
-		seq_printf(m, "%-16s %s\n", "ver_cardtype", s);
-	if ((s = cinfo->version[VER_SERIAL]) != NULL)
-		seq_printf(m, "%-16s %s\n", "ver_serial", s);
-
-	if (card->cardtype != avm_m1) {
-		flag = ((u8 *)(ctrl->profile.manu))[3];
-		if (flag)
-			seq_printf(m, "%-16s%s%s%s%s%s%s%s\n",
-				   "protocol",
-				   (flag & 0x01) ? " DSS1" : "",
-				   (flag & 0x02) ? " CT1" : "",
-				   (flag & 0x04) ? " VN3" : "",
-				   (flag & 0x08) ? " NI1" : "",
-				   (flag & 0x10) ? " AUSTEL" : "",
-				   (flag & 0x20) ? " ESS" : "",
-				   (flag & 0x40) ? " 1TR6" : ""
-				);
-	}
-	if (card->cardtype != avm_m1) {
-		flag = ((u8 *)(ctrl->profile.manu))[5];
-		if (flag)
-			seq_printf(m, "%-16s%s%s%s%s\n",
-				   "linetype",
-				   (flag & 0x01) ? " point to point" : "",
-				   (flag & 0x02) ? " point to multipoint" : "",
-				   (flag & 0x08) ? " leased line without D-channel" : "",
-				   (flag & 0x04) ? " leased line with D-channel" : ""
-				);
-	}
-	seq_printf(m, "%-16s %s\n", "cardname", cinfo->cardname);
-
-
-	spin_lock_irqsave(&card->lock, flags);
-
-	txoff = (dma_addr_t)b1dma_readl(card, AMCC_TXPTR)-card->dma->sendbuf.dmaaddr;
-	txlen = b1dma_readl(card, AMCC_TXLEN);
-
-	rxoff = (dma_addr_t)b1dma_readl(card, AMCC_RXPTR)-card->dma->recvbuf.dmaaddr;
-	rxlen = b1dma_readl(card, AMCC_RXLEN);
-
-	csr  = b1dma_readl(card, AMCC_INTCSR);
-
-	spin_unlock_irqrestore(&card->lock, flags);
-
-	seq_printf(m, "%-16s 0x%lx\n", "csr (cached)", (unsigned long)card->csr);
-	seq_printf(m, "%-16s 0x%lx\n", "csr", (unsigned long)csr);
-	seq_printf(m, "%-16s %lu\n", "txoff", (unsigned long)txoff);
-	seq_printf(m, "%-16s %lu\n", "txlen", (unsigned long)txlen);
-	seq_printf(m, "%-16s %lu\n", "rxoff", (unsigned long)rxoff);
-	seq_printf(m, "%-16s %lu\n", "rxlen", (unsigned long)rxlen);
-
-	return 0;
-}
-EXPORT_SYMBOL(b1dma_proc_show);
-
-/* ------------------------------------------------------------- */
-
-EXPORT_SYMBOL(b1dma_reset);
-EXPORT_SYMBOL(t1pci_detect);
-EXPORT_SYMBOL(b1pciv4_detect);
-EXPORT_SYMBOL(b1dma_interrupt);
-
-EXPORT_SYMBOL(b1dma_load_firmware);
-EXPORT_SYMBOL(b1dma_reset_ctr);
-EXPORT_SYMBOL(b1dma_register_appl);
-EXPORT_SYMBOL(b1dma_release_appl);
-EXPORT_SYMBOL(b1dma_send_message);
-
-static int __init b1dma_init(void)
-{
-	char *p;
-	char rev[32];
-
-	if ((p = strchr(revision, ':')) != NULL && p[1]) {
-		strlcpy(rev, p + 2, sizeof(rev));
-		if ((p = strchr(rev, '$')) != NULL && p > rev)
-			*(p - 1) = 0;
-	} else
-		strcpy(rev, "1.0");
-
-	printk(KERN_INFO "b1dma: revision %s\n", rev);
-
-	return 0;
-}
-
-static void __exit b1dma_exit(void)
-{
-}
-
-module_init(b1dma_init);
-module_exit(b1dma_exit);
diff --git a/drivers/staging/isdn/avm/b1isa.c b/drivers/staging/isdn/avm/b1isa.c
deleted file mode 100644
index cdfea72e0ef6..000000000000
--- a/drivers/staging/isdn/avm/b1isa.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/* $Id: b1isa.c,v 1.1.2.3 2004/02/10 01:07:12 keil Exp $
- *
- * Module for AVM B1 ISA-card.
- *
- * Copyright 1999 by Carsten Paeth <calle@calle.de>
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/skbuff.h>
-#include <linux/delay.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/capi.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <linux/isdn/capicmd.h>
-#include <linux/isdn/capiutil.h>
-#include <linux/isdn/capilli.h>
-#include "avmcard.h"
-
-/* ------------------------------------------------------------- */
-
-static char *revision = "$Revision: 1.1.2.3 $";
-
-/* ------------------------------------------------------------- */
-
-MODULE_DESCRIPTION("CAPI4Linux: Driver for AVM B1 ISA card");
-MODULE_AUTHOR("Carsten Paeth");
-MODULE_LICENSE("GPL");
-
-/* ------------------------------------------------------------- */
-
-static void b1isa_remove(struct pci_dev *pdev)
-{
-	avmctrl_info *cinfo = pci_get_drvdata(pdev);
-	avmcard *card;
-
-	if (!cinfo)
-		return;
-
-	card = cinfo->card;
-
-	b1_reset(card->port);
-	b1_reset(card->port);
-
-	detach_capi_ctr(&cinfo->capi_ctrl);
-	free_irq(card->irq, card);
-	release_region(card->port, AVMB1_PORTLEN);
-	b1_free_card(card);
-}
-
-/* ------------------------------------------------------------- */
-
-static char *b1isa_procinfo(struct capi_ctr *ctrl);
-
-static int b1isa_probe(struct pci_dev *pdev)
-{
-	avmctrl_info *cinfo;
-	avmcard *card;
-	int retval;
-
-	card = b1_alloc_card(1);
-	if (!card) {
-		printk(KERN_WARNING "b1isa: no memory.\n");
-		retval = -ENOMEM;
-		goto err;
-	}
-
-	cinfo = card->ctrlinfo;
-
-	card->port = pci_resource_start(pdev, 0);
-	card->irq = pdev->irq;
-	card->cardtype = avm_b1isa;
-	sprintf(card->name, "b1isa-%x", card->port);
-
-	if (card->port != 0x150 && card->port != 0x250
-	    && card->port != 0x300 && card->port != 0x340) {
-		printk(KERN_WARNING "b1isa: invalid port 0x%x.\n", card->port);
-		retval = -EINVAL;
-		goto err_free;
-	}
-	if (b1_irq_table[card->irq & 0xf] == 0) {
-		printk(KERN_WARNING "b1isa: irq %d not valid.\n", card->irq);
-		retval = -EINVAL;
-		goto err_free;
-	}
-	if (!request_region(card->port, AVMB1_PORTLEN, card->name)) {
-		printk(KERN_WARNING "b1isa: ports 0x%03x-0x%03x in use.\n",
-		       card->port, card->port + AVMB1_PORTLEN);
-		retval = -EBUSY;
-		goto err_free;
-	}
-	retval = request_irq(card->irq, b1_interrupt, 0, card->name, card);
-	if (retval) {
-		printk(KERN_ERR "b1isa: unable to get IRQ %d.\n", card->irq);
-		goto err_release_region;
-	}
-	b1_reset(card->port);
-	if ((retval = b1_detect(card->port, card->cardtype)) != 0) {
-		printk(KERN_NOTICE "b1isa: NO card at 0x%x (%d)\n",
-		       card->port, retval);
-		retval = -ENODEV;
-		goto err_free_irq;
-	}
-	b1_reset(card->port);
-	b1_getrevision(card);
-
-	cinfo->capi_ctrl.owner = THIS_MODULE;
-	cinfo->capi_ctrl.driver_name   = "b1isa";
-	cinfo->capi_ctrl.driverdata    = cinfo;
-	cinfo->capi_ctrl.register_appl = b1_register_appl;
-	cinfo->capi_ctrl.release_appl  = b1_release_appl;
-	cinfo->capi_ctrl.send_message  = b1_send_message;
-	cinfo->capi_ctrl.load_firmware = b1_load_firmware;
-	cinfo->capi_ctrl.reset_ctr     = b1_reset_ctr;
-	cinfo->capi_ctrl.procinfo      = b1isa_procinfo;
-	cinfo->capi_ctrl.proc_show     = b1_proc_show;
-	strcpy(cinfo->capi_ctrl.name, card->name);
-
-	retval = attach_capi_ctr(&cinfo->capi_ctrl);
-	if (retval) {
-		printk(KERN_ERR "b1isa: attach controller failed.\n");
-		goto err_free_irq;
-	}
-
-	printk(KERN_INFO "b1isa: AVM B1 ISA at i/o %#x, irq %d, revision %d\n",
-	       card->port, card->irq, card->revision);
-
-	pci_set_drvdata(pdev, cinfo);
-	return 0;
-
-err_free_irq:
-	free_irq(card->irq, card);
-err_release_region:
-	release_region(card->port, AVMB1_PORTLEN);
-err_free:
-	b1_free_card(card);
-err:
-	return retval;
-}
-
-static char *b1isa_procinfo(struct capi_ctr *ctrl)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-
-	if (!cinfo)
-		return "";
-	sprintf(cinfo->infobuf, "%s %s 0x%x %d r%d",
-		cinfo->cardname[0] ? cinfo->cardname : "-",
-		cinfo->version[VER_DRIVER] ? cinfo->version[VER_DRIVER] : "-",
-		cinfo->card ? cinfo->card->port : 0x0,
-		cinfo->card ? cinfo->card->irq : 0,
-		cinfo->card ? cinfo->card->revision : 0
-		);
-	return cinfo->infobuf;
-}
-
-/* ------------------------------------------------------------- */
-
-#define MAX_CARDS 4
-static struct pci_dev isa_dev[MAX_CARDS];
-static int io[MAX_CARDS];
-static int irq[MAX_CARDS];
-
-module_param_hw_array(io, int, ioport, NULL, 0);
-module_param_hw_array(irq, int, irq, NULL, 0);
-MODULE_PARM_DESC(io, "I/O base address(es)");
-MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
-
-static int b1isa_add_card(struct capi_driver *driver, capicardparams *data)
-{
-	int i;
-
-	for (i = 0; i < MAX_CARDS; i++) {
-		if (isa_dev[i].resource[0].start)
-			continue;
-
-		isa_dev[i].resource[0].start = data->port;
-		isa_dev[i].irq = data->irq;
-
-		if (b1isa_probe(&isa_dev[i]) == 0)
-			return 0;
-	}
-	return -ENODEV;
-}
-
-static struct capi_driver capi_driver_b1isa = {
-	.name		= "b1isa",
-	.revision	= "1.0",
-	.add_card       = b1isa_add_card,
-};
-
-static int __init b1isa_init(void)
-{
-	char *p;
-	char rev[32];
-	int i;
-
-	if ((p = strchr(revision, ':')) != NULL && p[1]) {
-		strlcpy(rev, p + 2, 32);
-		if ((p = strchr(rev, '$')) != NULL && p > rev)
-			*(p - 1) = 0;
-	} else
-		strcpy(rev, "1.0");
-
-	for (i = 0; i < MAX_CARDS; i++) {
-		if (!io[i])
-			break;
-
-		isa_dev[i].resource[0].start = io[i];
-		isa_dev[i].irq = irq[i];
-
-		if (b1isa_probe(&isa_dev[i]) != 0)
-			return -ENODEV;
-	}
-
-	strlcpy(capi_driver_b1isa.revision, rev, 32);
-	register_capi_driver(&capi_driver_b1isa);
-	printk(KERN_INFO "b1isa: revision %s\n", rev);
-
-	return 0;
-}
-
-static void __exit b1isa_exit(void)
-{
-	int i;
-
-	for (i = 0; i < MAX_CARDS; i++) {
-		if (isa_dev[i].resource[0].start)
-			b1isa_remove(&isa_dev[i]);
-	}
-	unregister_capi_driver(&capi_driver_b1isa);
-}
-
-module_init(b1isa_init);
-module_exit(b1isa_exit);
diff --git a/drivers/staging/isdn/avm/b1pci.c b/drivers/staging/isdn/avm/b1pci.c
deleted file mode 100644
index b76b57a82c02..000000000000
--- a/drivers/staging/isdn/avm/b1pci.c
+++ /dev/null
@@ -1,416 +0,0 @@
-/* $Id: b1pci.c,v 1.1.2.2 2004/01/16 21:09:27 keil Exp $
- *
- * Module for AVM B1 PCI-card.
- *
- * Copyright 1999 by Carsten Paeth <calle@calle.de>
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/skbuff.h>
-#include <linux/delay.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/capi.h>
-#include <asm/io.h>
-#include <linux/init.h>
-#include <linux/isdn/capicmd.h>
-#include <linux/isdn/capiutil.h>
-#include <linux/isdn/capilli.h>
-#include "avmcard.h"
-
-/* ------------------------------------------------------------- */
-
-static char *revision = "$Revision: 1.1.2.2 $";
-
-/* ------------------------------------------------------------- */
-
-static struct pci_device_id b1pci_pci_tbl[] = {
-	{ PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_B1, PCI_ANY_ID, PCI_ANY_ID },
-	{ }				/* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(pci, b1pci_pci_tbl);
-MODULE_DESCRIPTION("CAPI4Linux: Driver for AVM B1 PCI card");
-MODULE_AUTHOR("Carsten Paeth");
-MODULE_LICENSE("GPL");
-
-/* ------------------------------------------------------------- */
-
-static char *b1pci_procinfo(struct capi_ctr *ctrl)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-
-	if (!cinfo)
-		return "";
-	sprintf(cinfo->infobuf, "%s %s 0x%x %d r%d",
-		cinfo->cardname[0] ? cinfo->cardname : "-",
-		cinfo->version[VER_DRIVER] ? cinfo->version[VER_DRIVER] : "-",
-		cinfo->card ? cinfo->card->port : 0x0,
-		cinfo->card ? cinfo->card->irq : 0,
-		cinfo->card ? cinfo->card->revision : 0
-		);
-	return cinfo->infobuf;
-}
-
-/* ------------------------------------------------------------- */
-
-static int b1pci_probe(struct capicardparams *p, struct pci_dev *pdev)
-{
-	avmcard *card;
-	avmctrl_info *cinfo;
-	int retval;
-
-	card = b1_alloc_card(1);
-	if (!card) {
-		printk(KERN_WARNING "b1pci: no memory.\n");
-		retval = -ENOMEM;
-		goto err;
-	}
-
-	cinfo = card->ctrlinfo;
-	sprintf(card->name, "b1pci-%x", p->port);
-	card->port = p->port;
-	card->irq = p->irq;
-	card->cardtype = avm_b1pci;
-
-	if (!request_region(card->port, AVMB1_PORTLEN, card->name)) {
-		printk(KERN_WARNING "b1pci: ports 0x%03x-0x%03x in use.\n",
-		       card->port, card->port + AVMB1_PORTLEN);
-		retval = -EBUSY;
-		goto err_free;
-	}
-	b1_reset(card->port);
-	retval = b1_detect(card->port, card->cardtype);
-	if (retval) {
-		printk(KERN_NOTICE "b1pci: NO card at 0x%x (%d)\n",
-		       card->port, retval);
-		retval = -ENODEV;
-		goto err_release_region;
-	}
-	b1_reset(card->port);
-	b1_getrevision(card);
-
-	retval = request_irq(card->irq, b1_interrupt, IRQF_SHARED, card->name, card);
-	if (retval) {
-		printk(KERN_ERR "b1pci: unable to get IRQ %d.\n", card->irq);
-		retval = -EBUSY;
-		goto err_release_region;
-	}
-
-	cinfo->capi_ctrl.driver_name   = "b1pci";
-	cinfo->capi_ctrl.driverdata    = cinfo;
-	cinfo->capi_ctrl.register_appl = b1_register_appl;
-	cinfo->capi_ctrl.release_appl  = b1_release_appl;
-	cinfo->capi_ctrl.send_message  = b1_send_message;
-	cinfo->capi_ctrl.load_firmware = b1_load_firmware;
-	cinfo->capi_ctrl.reset_ctr     = b1_reset_ctr;
-	cinfo->capi_ctrl.procinfo      = b1pci_procinfo;
-	cinfo->capi_ctrl.proc_show     = b1_proc_show;
-	strcpy(cinfo->capi_ctrl.name, card->name);
-	cinfo->capi_ctrl.owner         = THIS_MODULE;
-
-	retval = attach_capi_ctr(&cinfo->capi_ctrl);
-	if (retval) {
-		printk(KERN_ERR "b1pci: attach controller failed.\n");
-		goto err_free_irq;
-	}
-
-	if (card->revision >= 4) {
-		printk(KERN_INFO "b1pci: AVM B1 PCI V4 at i/o %#x, irq %d, revision %d (no dma)\n",
-		       card->port, card->irq, card->revision);
-	} else {
-		printk(KERN_INFO "b1pci: AVM B1 PCI at i/o %#x, irq %d, revision %d\n",
-		       card->port, card->irq, card->revision);
-	}
-
-	pci_set_drvdata(pdev, card);
-	return 0;
-
-err_free_irq:
-	free_irq(card->irq, card);
-err_release_region:
-	release_region(card->port, AVMB1_PORTLEN);
-err_free:
-	b1_free_card(card);
-err:
-	return retval;
-}
-
-static void b1pci_remove(struct pci_dev *pdev)
-{
-	avmcard *card = pci_get_drvdata(pdev);
-	avmctrl_info *cinfo = card->ctrlinfo;
-	unsigned int port = card->port;
-
-	b1_reset(port);
-	b1_reset(port);
-
-	detach_capi_ctr(&cinfo->capi_ctrl);
-	free_irq(card->irq, card);
-	release_region(card->port, AVMB1_PORTLEN);
-	b1_free_card(card);
-}
-
-#ifdef CONFIG_ISDN_DRV_AVMB1_B1PCIV4
-/* ------------------------------------------------------------- */
-
-static char *b1pciv4_procinfo(struct capi_ctr *ctrl)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-
-	if (!cinfo)
-		return "";
-	sprintf(cinfo->infobuf, "%s %s 0x%x %d 0x%lx r%d",
-		cinfo->cardname[0] ? cinfo->cardname : "-",
-		cinfo->version[VER_DRIVER] ? cinfo->version[VER_DRIVER] : "-",
-		cinfo->card ? cinfo->card->port : 0x0,
-		cinfo->card ? cinfo->card->irq : 0,
-		cinfo->card ? cinfo->card->membase : 0,
-		cinfo->card ? cinfo->card->revision : 0
-		);
-	return cinfo->infobuf;
-}
-
-/* ------------------------------------------------------------- */
-
-static int b1pciv4_probe(struct capicardparams *p, struct pci_dev *pdev)
-{
-	avmcard *card;
-	avmctrl_info *cinfo;
-	int retval;
-
-	card = b1_alloc_card(1);
-	if (!card) {
-		printk(KERN_WARNING "b1pci: no memory.\n");
-		retval = -ENOMEM;
-		goto err;
-	}
-
-	card->dma = avmcard_dma_alloc("b1pci", pdev, 2048 + 128, 2048 + 128);
-	if (!card->dma) {
-		printk(KERN_WARNING "b1pci: dma alloc.\n");
-		retval = -ENOMEM;
-		goto err_free;
-	}
-
-	cinfo = card->ctrlinfo;
-	sprintf(card->name, "b1pciv4-%x", p->port);
-	card->port = p->port;
-	card->irq = p->irq;
-	card->membase = p->membase;
-	card->cardtype = avm_b1pci;
-
-	if (!request_region(card->port, AVMB1_PORTLEN, card->name)) {
-		printk(KERN_WARNING "b1pci: ports 0x%03x-0x%03x in use.\n",
-		       card->port, card->port + AVMB1_PORTLEN);
-		retval = -EBUSY;
-		goto err_free_dma;
-	}
-
-	card->mbase = ioremap(card->membase, 64);
-	if (!card->mbase) {
-		printk(KERN_NOTICE "b1pci: can't remap memory at 0x%lx\n",
-		       card->membase);
-		retval = -ENOMEM;
-		goto err_release_region;
-	}
-
-	b1dma_reset(card);
-
-	retval = b1pciv4_detect(card);
-	if (retval) {
-		printk(KERN_NOTICE "b1pci: NO card at 0x%x (%d)\n",
-		       card->port, retval);
-		retval = -ENODEV;
-		goto err_unmap;
-	}
-	b1dma_reset(card);
-	b1_getrevision(card);
-
-	retval = request_irq(card->irq, b1dma_interrupt, IRQF_SHARED, card->name, card);
-	if (retval) {
-		printk(KERN_ERR "b1pci: unable to get IRQ %d.\n",
-		       card->irq);
-		retval = -EBUSY;
-		goto err_unmap;
-	}
-
-	cinfo->capi_ctrl.owner         = THIS_MODULE;
-	cinfo->capi_ctrl.driver_name   = "b1pciv4";
-	cinfo->capi_ctrl.driverdata    = cinfo;
-	cinfo->capi_ctrl.register_appl = b1dma_register_appl;
-	cinfo->capi_ctrl.release_appl  = b1dma_release_appl;
-	cinfo->capi_ctrl.send_message  = b1dma_send_message;
-	cinfo->capi_ctrl.load_firmware = b1dma_load_firmware;
-	cinfo->capi_ctrl.reset_ctr     = b1dma_reset_ctr;
-	cinfo->capi_ctrl.procinfo      = b1pciv4_procinfo;
-	cinfo->capi_ctrl.proc_show     = b1dma_proc_show;
-	strcpy(cinfo->capi_ctrl.name, card->name);
-
-	retval = attach_capi_ctr(&cinfo->capi_ctrl);
-	if (retval) {
-		printk(KERN_ERR "b1pci: attach controller failed.\n");
-		goto err_free_irq;
-	}
-	card->cardnr = cinfo->capi_ctrl.cnr;
-
-	printk(KERN_INFO "b1pci: AVM B1 PCI V4 at i/o %#x, irq %d, mem %#lx, revision %d (dma)\n",
-	       card->port, card->irq, card->membase, card->revision);
-
-	pci_set_drvdata(pdev, card);
-	return 0;
-
-err_free_irq:
-	free_irq(card->irq, card);
-err_unmap:
-	iounmap(card->mbase);
-err_release_region:
-	release_region(card->port, AVMB1_PORTLEN);
-err_free_dma:
-	avmcard_dma_free(card->dma);
-err_free:
-	b1_free_card(card);
-err:
-	return retval;
-
-}
-
-static void b1pciv4_remove(struct pci_dev *pdev)
-{
-	avmcard *card = pci_get_drvdata(pdev);
-	avmctrl_info *cinfo = card->ctrlinfo;
-
-	b1dma_reset(card);
-
-	detach_capi_ctr(&cinfo->capi_ctrl);
-	free_irq(card->irq, card);
-	iounmap(card->mbase);
-	release_region(card->port, AVMB1_PORTLEN);
-	avmcard_dma_free(card->dma);
-	b1_free_card(card);
-}
-
-#endif /* CONFIG_ISDN_DRV_AVMB1_B1PCIV4 */
-
-static int b1pci_pci_probe(struct pci_dev *pdev,
-			   const struct pci_device_id *ent)
-{
-	struct capicardparams param;
-	int retval;
-
-	if (pci_enable_device(pdev) < 0) {
-		printk(KERN_ERR "b1pci: failed to enable AVM-B1\n");
-		return -ENODEV;
-	}
-	param.irq = pdev->irq;
-
-	if (pci_resource_start(pdev, 2)) { /* B1 PCI V4 */
-#ifdef CONFIG_ISDN_DRV_AVMB1_B1PCIV4
-		pci_set_master(pdev);
-#endif
-		param.membase = pci_resource_start(pdev, 0);
-		param.port = pci_resource_start(pdev, 2);
-
-		printk(KERN_INFO "b1pci: PCI BIOS reports AVM-B1 V4 at i/o %#x, irq %d, mem %#x\n",
-		       param.port, param.irq, param.membase);
-#ifdef CONFIG_ISDN_DRV_AVMB1_B1PCIV4
-		retval = b1pciv4_probe(&param, pdev);
-#else
-		retval = b1pci_probe(&param, pdev);
-#endif
-		if (retval != 0) {
-			printk(KERN_ERR "b1pci: no AVM-B1 V4 at i/o %#x, irq %d, mem %#x detected\n",
-			       param.port, param.irq, param.membase);
-		}
-	} else {
-		param.membase = 0;
-		param.port = pci_resource_start(pdev, 1);
-
-		printk(KERN_INFO "b1pci: PCI BIOS reports AVM-B1 at i/o %#x, irq %d\n",
-		       param.port, param.irq);
-		retval = b1pci_probe(&param, pdev);
-		if (retval != 0) {
-			printk(KERN_ERR "b1pci: no AVM-B1 at i/o %#x, irq %d detected\n",
-			       param.port, param.irq);
-		}
-	}
-	return retval;
-}
-
-static void b1pci_pci_remove(struct pci_dev *pdev)
-{
-#ifdef CONFIG_ISDN_DRV_AVMB1_B1PCIV4
-	avmcard *card = pci_get_drvdata(pdev);
-
-	if (card->dma)
-		b1pciv4_remove(pdev);
-	else
-		b1pci_remove(pdev);
-#else
-	b1pci_remove(pdev);
-#endif
-}
-
-static struct pci_driver b1pci_pci_driver = {
-	.name		= "b1pci",
-	.id_table	= b1pci_pci_tbl,
-	.probe		= b1pci_pci_probe,
-	.remove		= b1pci_pci_remove,
-};
-
-static struct capi_driver capi_driver_b1pci = {
-	.name		= "b1pci",
-	.revision	= "1.0",
-};
-#ifdef CONFIG_ISDN_DRV_AVMB1_B1PCIV4
-static struct capi_driver capi_driver_b1pciv4 = {
-	.name		= "b1pciv4",
-	.revision	= "1.0",
-};
-#endif
-
-static int __init b1pci_init(void)
-{
-	char *p;
-	char rev[32];
-	int err;
-
-	if ((p = strchr(revision, ':')) != NULL && p[1]) {
-		strlcpy(rev, p + 2, 32);
-		if ((p = strchr(rev, '$')) != NULL && p > rev)
-			*(p - 1) = 0;
-	} else
-		strcpy(rev, "1.0");
-
-
-	err = pci_register_driver(&b1pci_pci_driver);
-	if (!err) {
-		strlcpy(capi_driver_b1pci.revision, rev, 32);
-		register_capi_driver(&capi_driver_b1pci);
-#ifdef CONFIG_ISDN_DRV_AVMB1_B1PCIV4
-		strlcpy(capi_driver_b1pciv4.revision, rev, 32);
-		register_capi_driver(&capi_driver_b1pciv4);
-#endif
-		printk(KERN_INFO "b1pci: revision %s\n", rev);
-	}
-	return err;
-}
-
-static void __exit b1pci_exit(void)
-{
-	unregister_capi_driver(&capi_driver_b1pci);
-#ifdef CONFIG_ISDN_DRV_AVMB1_B1PCIV4
-	unregister_capi_driver(&capi_driver_b1pciv4);
-#endif
-	pci_unregister_driver(&b1pci_pci_driver);
-}
-
-module_init(b1pci_init);
-module_exit(b1pci_exit);
diff --git a/drivers/staging/isdn/avm/b1pcmcia.c b/drivers/staging/isdn/avm/b1pcmcia.c
deleted file mode 100644
index 3aca16e62902..000000000000
--- a/drivers/staging/isdn/avm/b1pcmcia.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/* $Id: b1pcmcia.c,v 1.1.2.2 2004/01/16 21:09:27 keil Exp $
- *
- * Module for AVM B1/M1/M2 PCMCIA-card.
- *
- * Copyright 1999 by Carsten Paeth <calle@calle.de>
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/skbuff.h>
-#include <linux/delay.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <linux/capi.h>
-#include <linux/b1pcmcia.h>
-#include <linux/isdn/capicmd.h>
-#include <linux/isdn/capiutil.h>
-#include <linux/isdn/capilli.h>
-#include "avmcard.h"
-
-/* ------------------------------------------------------------- */
-
-static char *revision = "$Revision: 1.1.2.2 $";
-
-/* ------------------------------------------------------------- */
-
-MODULE_DESCRIPTION("CAPI4Linux: Driver for AVM PCMCIA cards");
-MODULE_AUTHOR("Carsten Paeth");
-MODULE_LICENSE("GPL");
-
-/* ------------------------------------------------------------- */
-
-static void b1pcmcia_remove_ctr(struct capi_ctr *ctrl)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-	avmcard *card = cinfo->card;
-	unsigned int port = card->port;
-
-	b1_reset(port);
-	b1_reset(port);
-
-	detach_capi_ctr(ctrl);
-	free_irq(card->irq, card);
-	b1_free_card(card);
-}
-
-/* ------------------------------------------------------------- */
-
-static LIST_HEAD(cards);
-
-static char *b1pcmcia_procinfo(struct capi_ctr *ctrl);
-
-static int b1pcmcia_add_card(unsigned int port, unsigned irq,
-			     enum avmcardtype cardtype)
-{
-	avmctrl_info *cinfo;
-	avmcard *card;
-	char *cardname;
-	int retval;
-
-	card = b1_alloc_card(1);
-	if (!card) {
-		printk(KERN_WARNING "b1pcmcia: no memory.\n");
-		retval = -ENOMEM;
-		goto err;
-	}
-	cinfo = card->ctrlinfo;
-
-	switch (cardtype) {
-	case avm_m1: sprintf(card->name, "m1-%x", port); break;
-	case avm_m2: sprintf(card->name, "m2-%x", port); break;
-	default: sprintf(card->name, "b1pcmcia-%x", port); break;
-	}
-	card->port = port;
-	card->irq = irq;
-	card->cardtype = cardtype;
-
-	retval = request_irq(card->irq, b1_interrupt, IRQF_SHARED, card->name, card);
-	if (retval) {
-		printk(KERN_ERR "b1pcmcia: unable to get IRQ %d.\n",
-		       card->irq);
-		retval = -EBUSY;
-		goto err_free;
-	}
-	b1_reset(card->port);
-	if ((retval = b1_detect(card->port, card->cardtype)) != 0) {
-		printk(KERN_NOTICE "b1pcmcia: NO card at 0x%x (%d)\n",
-		       card->port, retval);
-		retval = -ENODEV;
-		goto err_free_irq;
-	}
-	b1_reset(card->port);
-	b1_getrevision(card);
-
-	cinfo->capi_ctrl.owner         = THIS_MODULE;
-	cinfo->capi_ctrl.driver_name   = "b1pcmcia";
-	cinfo->capi_ctrl.driverdata    = cinfo;
-	cinfo->capi_ctrl.register_appl = b1_register_appl;
-	cinfo->capi_ctrl.release_appl  = b1_release_appl;
-	cinfo->capi_ctrl.send_message  = b1_send_message;
-	cinfo->capi_ctrl.load_firmware = b1_load_firmware;
-	cinfo->capi_ctrl.reset_ctr     = b1_reset_ctr;
-	cinfo->capi_ctrl.procinfo      = b1pcmcia_procinfo;
-	cinfo->capi_ctrl.proc_show     = b1_proc_show;
-	strcpy(cinfo->capi_ctrl.name, card->name);
-
-	retval = attach_capi_ctr(&cinfo->capi_ctrl);
-	if (retval) {
-		printk(KERN_ERR "b1pcmcia: attach controller failed.\n");
-		goto err_free_irq;
-	}
-	switch (cardtype) {
-	case avm_m1: cardname = "M1"; break;
-	case avm_m2: cardname = "M2"; break;
-	default: cardname = "B1 PCMCIA"; break;
-	}
-
-	printk(KERN_INFO "b1pcmcia: AVM %s at i/o %#x, irq %d, revision %d\n",
-	       cardname, card->port, card->irq, card->revision);
-
-	list_add(&card->list, &cards);
-	return cinfo->capi_ctrl.cnr;
-
-err_free_irq:
-	free_irq(card->irq, card);
-err_free:
-	b1_free_card(card);
-err:
-	return retval;
-}
-
-/* ------------------------------------------------------------- */
-
-static char *b1pcmcia_procinfo(struct capi_ctr *ctrl)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-
-	if (!cinfo)
-		return "";
-	sprintf(cinfo->infobuf, "%s %s 0x%x %d r%d",
-		cinfo->cardname[0] ? cinfo->cardname : "-",
-		cinfo->version[VER_DRIVER] ? cinfo->version[VER_DRIVER] : "-",
-		cinfo->card ? cinfo->card->port : 0x0,
-		cinfo->card ? cinfo->card->irq : 0,
-		cinfo->card ? cinfo->card->revision : 0
-		);
-	return cinfo->infobuf;
-}
-
-/* ------------------------------------------------------------- */
-
-int b1pcmcia_addcard_b1(unsigned int port, unsigned irq)
-{
-	return b1pcmcia_add_card(port, irq, avm_b1pcmcia);
-}
-
-int b1pcmcia_addcard_m1(unsigned int port, unsigned irq)
-{
-	return b1pcmcia_add_card(port, irq, avm_m1);
-}
-
-int b1pcmcia_addcard_m2(unsigned int port, unsigned irq)
-{
-	return b1pcmcia_add_card(port, irq, avm_m2);
-}
-
-int b1pcmcia_delcard(unsigned int port, unsigned irq)
-{
-	struct list_head *l;
-	avmcard *card;
-
-	list_for_each(l, &cards) {
-		card = list_entry(l, avmcard, list);
-		if (card->port == port && card->irq == irq) {
-			b1pcmcia_remove_ctr(&card->ctrlinfo[0].capi_ctrl);
-			return 0;
-		}
-	}
-	return -ESRCH;
-}
-
-EXPORT_SYMBOL(b1pcmcia_addcard_b1);
-EXPORT_SYMBOL(b1pcmcia_addcard_m1);
-EXPORT_SYMBOL(b1pcmcia_addcard_m2);
-EXPORT_SYMBOL(b1pcmcia_delcard);
-
-static struct capi_driver capi_driver_b1pcmcia = {
-	.name		= "b1pcmcia",
-	.revision	= "1.0",
-};
-
-static int __init b1pcmcia_init(void)
-{
-	char *p;
-	char rev[32];
-
-	if ((p = strchr(revision, ':')) != NULL && p[1]) {
-		strlcpy(rev, p + 2, 32);
-		if ((p = strchr(rev, '$')) != NULL && p > rev)
-			*(p - 1) = 0;
-	} else
-		strcpy(rev, "1.0");
-
-	strlcpy(capi_driver_b1pcmcia.revision, rev, 32);
-	register_capi_driver(&capi_driver_b1pcmcia);
-	printk(KERN_INFO "b1pci: revision %s\n", rev);
-
-	return 0;
-}
-
-static void __exit b1pcmcia_exit(void)
-{
-	unregister_capi_driver(&capi_driver_b1pcmcia);
-}
-
-module_init(b1pcmcia_init);
-module_exit(b1pcmcia_exit);
diff --git a/drivers/staging/isdn/avm/c4.c b/drivers/staging/isdn/avm/c4.c
deleted file mode 100644
index ac72cd204c4d..000000000000
--- a/drivers/staging/isdn/avm/c4.c
+++ /dev/null
@@ -1,1317 +0,0 @@
-/* $Id: c4.c,v 1.1.2.2 2004/01/16 21:09:27 keil Exp $
- *
- * Module for AVM C4 & C2 card.
- *
- * Copyright 1999 by Carsten Paeth <calle@calle.de>
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/skbuff.h>
-#include <linux/delay.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/capi.h>
-#include <linux/kernelcapi.h>
-#include <linux/init.h>
-#include <linux/gfp.h>
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include <linux/netdevice.h>
-#include <linux/isdn/capicmd.h>
-#include <linux/isdn/capiutil.h>
-#include <linux/isdn/capilli.h>
-#include "avmcard.h"
-
-#undef AVM_C4_DEBUG
-#undef AVM_C4_POLLDEBUG
-
-/* ------------------------------------------------------------- */
-
-static char *revision = "$Revision: 1.1.2.2 $";
-
-/* ------------------------------------------------------------- */
-
-static bool suppress_pollack;
-
-static const struct pci_device_id c4_pci_tbl[] = {
-	{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21285, PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_C4, 0, 0, (unsigned long)4 },
-	{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21285, PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_C2, 0, 0, (unsigned long)2 },
-	{ }			/* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(pci, c4_pci_tbl);
-MODULE_DESCRIPTION("CAPI4Linux: Driver for AVM C2/C4 cards");
-MODULE_AUTHOR("Carsten Paeth");
-MODULE_LICENSE("GPL");
-module_param(suppress_pollack, bool, 0);
-
-/* ------------------------------------------------------------- */
-
-static void c4_dispatch_tx(avmcard *card);
-
-/* ------------------------------------------------------------- */
-
-#define DC21285_DRAM_A0MR	0x40000000
-#define DC21285_DRAM_A1MR	0x40004000
-#define DC21285_DRAM_A2MR	0x40008000
-#define DC21285_DRAM_A3MR	0x4000C000
-
-#define	CAS_OFFSET	0x88
-
-#define DC21285_ARMCSR_BASE	0x42000000
-
-#define	PCI_OUT_INT_STATUS	0x30
-#define	PCI_OUT_INT_MASK	0x34
-#define	MAILBOX_0		0x50
-#define	MAILBOX_1		0x54
-#define	MAILBOX_2		0x58
-#define	MAILBOX_3		0x5C
-#define	DOORBELL		0x60
-#define	DOORBELL_SETUP		0x64
-
-#define CHAN_1_CONTROL		0x90
-#define CHAN_2_CONTROL		0xB0
-#define DRAM_TIMING		0x10C
-#define DRAM_ADDR_SIZE_0	0x110
-#define DRAM_ADDR_SIZE_1	0x114
-#define DRAM_ADDR_SIZE_2	0x118
-#define DRAM_ADDR_SIZE_3	0x11C
-#define	SA_CONTROL		0x13C
-#define	XBUS_CYCLE		0x148
-#define	XBUS_STROBE		0x14C
-#define	DBELL_PCI_MASK		0x150
-#define DBELL_SA_MASK		0x154
-
-#define SDRAM_SIZE		0x1000000
-
-/* ------------------------------------------------------------- */
-
-#define	MBOX_PEEK_POKE		MAILBOX_0
-
-#define DBELL_ADDR		0x01
-#define DBELL_DATA		0x02
-#define DBELL_RNWR		0x40
-#define DBELL_INIT		0x80
-
-/* ------------------------------------------------------------- */
-
-#define	MBOX_UP_ADDR		MAILBOX_0
-#define	MBOX_UP_LEN		MAILBOX_1
-#define	MBOX_DOWN_ADDR		MAILBOX_2
-#define	MBOX_DOWN_LEN		MAILBOX_3
-
-#define	DBELL_UP_HOST		0x00000100
-#define	DBELL_UP_ARM		0x00000200
-#define	DBELL_DOWN_HOST		0x00000400
-#define	DBELL_DOWN_ARM		0x00000800
-#define	DBELL_RESET_HOST	0x40000000
-#define	DBELL_RESET_ARM		0x80000000
-
-/* ------------------------------------------------------------- */
-
-#define	DRAM_TIMING_DEF		0x001A01A5
-#define DRAM_AD_SZ_DEF0		0x00000045
-#define DRAM_AD_SZ_NULL		0x00000000
-
-#define SA_CTL_ALLRIGHT		0x64AA0271
-
-#define	INIT_XBUS_CYCLE		0x100016DB
-#define	INIT_XBUS_STROBE	0xF1F1F1F1
-
-/* ------------------------------------------------------------- */
-
-#define	RESET_TIMEOUT		(15 * HZ)	/* 15 sec */
-#define	PEEK_POKE_TIMEOUT	(HZ / 10)	/* 0.1 sec */
-
-/* ------------------------------------------------------------- */
-
-#define c4outmeml(addr, value)	writel(value, addr)
-#define c4inmeml(addr)	readl(addr)
-#define c4outmemw(addr, value)	writew(value, addr)
-#define c4inmemw(addr)	readw(addr)
-#define c4outmemb(addr, value)	writeb(value, addr)
-#define c4inmemb(addr)	readb(addr)
-
-/* ------------------------------------------------------------- */
-
-static inline int wait_for_doorbell(avmcard *card, unsigned long t)
-{
-	unsigned long stop;
-
-	stop = jiffies + t;
-	while (c4inmeml(card->mbase + DOORBELL) != 0xffffffff) {
-		if (!time_before(jiffies, stop))
-			return -1;
-		mb();
-	}
-	return 0;
-}
-
-static int c4_poke(avmcard *card,  unsigned long off, unsigned long value)
-{
-
-	if (wait_for_doorbell(card, HZ / 10) < 0)
-		return -1;
-
-	c4outmeml(card->mbase + MBOX_PEEK_POKE, off);
-	c4outmeml(card->mbase + DOORBELL, DBELL_ADDR);
-
-	if (wait_for_doorbell(card, HZ / 10) < 0)
-		return -1;
-
-	c4outmeml(card->mbase + MBOX_PEEK_POKE, value);
-	c4outmeml(card->mbase + DOORBELL, DBELL_DATA | DBELL_ADDR);
-
-	return 0;
-}
-
-static int c4_peek(avmcard *card,  unsigned long off, unsigned long *valuep)
-{
-	if (wait_for_doorbell(card, HZ / 10) < 0)
-		return -1;
-
-	c4outmeml(card->mbase + MBOX_PEEK_POKE, off);
-	c4outmeml(card->mbase + DOORBELL, DBELL_RNWR | DBELL_ADDR);
-
-	if (wait_for_doorbell(card, HZ / 10) < 0)
-		return -1;
-
-	*valuep = c4inmeml(card->mbase + MBOX_PEEK_POKE);
-
-	return 0;
-}
-
-/* ------------------------------------------------------------- */
-
-static int c4_load_t4file(avmcard *card, capiloaddatapart *t4file)
-{
-	u32 val;
-	unsigned char *dp;
-	u_int left;
-	u32 loadoff = 0;
-
-	dp = t4file->data;
-	left = t4file->len;
-	while (left >= sizeof(u32)) {
-		if (t4file->user) {
-			if (copy_from_user(&val, dp, sizeof(val)))
-				return -EFAULT;
-		} else {
-			memcpy(&val, dp, sizeof(val));
-		}
-		if (c4_poke(card, loadoff, val)) {
-			printk(KERN_ERR "%s: corrupted firmware file ?\n",
-			       card->name);
-			return -EIO;
-		}
-		left -= sizeof(u32);
-		dp += sizeof(u32);
-		loadoff += sizeof(u32);
-	}
-	if (left) {
-		val = 0;
-		if (t4file->user) {
-			if (copy_from_user(&val, dp, left))
-				return -EFAULT;
-		} else {
-			memcpy(&val, dp, left);
-		}
-		if (c4_poke(card, loadoff, val)) {
-			printk(KERN_ERR "%s: corrupted firmware file ?\n",
-			       card->name);
-			return -EIO;
-		}
-	}
-	return 0;
-}
-
-/* ------------------------------------------------------------- */
-
-static inline void _put_byte(void **pp, u8 val)
-{
-	u8 *s = *pp;
-	*s++ = val;
-	*pp = s;
-}
-
-static inline void _put_word(void **pp, u32 val)
-{
-	u8 *s = *pp;
-	*s++ = val & 0xff;
-	*s++ = (val >> 8) & 0xff;
-	*s++ = (val >> 16) & 0xff;
-	*s++ = (val >> 24) & 0xff;
-	*pp = s;
-}
-
-static inline void _put_slice(void **pp, unsigned char *dp, unsigned int len)
-{
-	unsigned i = len;
-	_put_word(pp, i);
-	while (i-- > 0)
-		_put_byte(pp, *dp++);
-}
-
-static inline u8 _get_byte(void **pp)
-{
-	u8 *s = *pp;
-	u8 val;
-	val = *s++;
-	*pp = s;
-	return val;
-}
-
-static inline u32 _get_word(void **pp)
-{
-	u8 *s = *pp;
-	u32 val;
-	val = *s++;
-	val |= (*s++ << 8);
-	val |= (*s++ << 16);
-	val |= (*s++ << 24);
-	*pp = s;
-	return val;
-}
-
-static inline u32 _get_slice(void **pp, unsigned char *dp)
-{
-	unsigned int len, i;
-
-	len = i = _get_word(pp);
-	while (i-- > 0) *dp++ = _get_byte(pp);
-	return len;
-}
-
-/* ------------------------------------------------------------- */
-
-static void c4_reset(avmcard *card)
-{
-	unsigned long stop;
-
-	c4outmeml(card->mbase + DOORBELL, DBELL_RESET_ARM);
-
-	stop = jiffies + HZ * 10;
-	while (c4inmeml(card->mbase + DOORBELL) != 0xffffffff) {
-		if (!time_before(jiffies, stop))
-			return;
-		c4outmeml(card->mbase + DOORBELL, DBELL_ADDR);
-		mb();
-	}
-
-	c4_poke(card, DC21285_ARMCSR_BASE + CHAN_1_CONTROL, 0);
-	c4_poke(card, DC21285_ARMCSR_BASE + CHAN_2_CONTROL, 0);
-}
-
-/* ------------------------------------------------------------- */
-
-static int c4_detect(avmcard *card)
-{
-	unsigned long stop, dummy;
-
-	c4outmeml(card->mbase + PCI_OUT_INT_MASK, 0x0c);
-	if (c4inmeml(card->mbase + PCI_OUT_INT_MASK) != 0x0c)
-		return	1;
-
-	c4outmeml(card->mbase + DOORBELL, DBELL_RESET_ARM);
-
-	stop = jiffies + HZ * 10;
-	while (c4inmeml(card->mbase + DOORBELL) != 0xffffffff) {
-		if (!time_before(jiffies, stop))
-			return 2;
-		c4outmeml(card->mbase + DOORBELL, DBELL_ADDR);
-		mb();
-	}
-
-	c4_poke(card, DC21285_ARMCSR_BASE + CHAN_1_CONTROL, 0);
-	c4_poke(card, DC21285_ARMCSR_BASE + CHAN_2_CONTROL, 0);
-
-	c4outmeml(card->mbase + MAILBOX_0, 0x55aa55aa);
-	if (c4inmeml(card->mbase + MAILBOX_0) != 0x55aa55aa) return 3;
-
-	c4outmeml(card->mbase + MAILBOX_0, 0xaa55aa55);
-	if (c4inmeml(card->mbase + MAILBOX_0) != 0xaa55aa55) return 4;
-
-	if (c4_poke(card, DC21285_ARMCSR_BASE + DBELL_SA_MASK, 0)) return 5;
-	if (c4_poke(card, DC21285_ARMCSR_BASE + DBELL_PCI_MASK, 0)) return 6;
-	if (c4_poke(card, DC21285_ARMCSR_BASE + SA_CONTROL, SA_CTL_ALLRIGHT))
-		return 7;
-	if (c4_poke(card, DC21285_ARMCSR_BASE + XBUS_CYCLE, INIT_XBUS_CYCLE))
-		return 8;
-	if (c4_poke(card, DC21285_ARMCSR_BASE + XBUS_STROBE, INIT_XBUS_STROBE))
-		return 8;
-	if (c4_poke(card, DC21285_ARMCSR_BASE + DRAM_TIMING, 0)) return 9;
-
-	mdelay(1);
-
-	if (c4_peek(card, DC21285_DRAM_A0MR, &dummy)) return 10;
-	if (c4_peek(card, DC21285_DRAM_A1MR, &dummy)) return 11;
-	if (c4_peek(card, DC21285_DRAM_A2MR, &dummy)) return 12;
-	if (c4_peek(card, DC21285_DRAM_A3MR, &dummy)) return 13;
-
-	if (c4_poke(card, DC21285_DRAM_A0MR + CAS_OFFSET, 0)) return 14;
-	if (c4_poke(card, DC21285_DRAM_A1MR + CAS_OFFSET, 0)) return 15;
-	if (c4_poke(card, DC21285_DRAM_A2MR + CAS_OFFSET, 0)) return 16;
-	if (c4_poke(card, DC21285_DRAM_A3MR + CAS_OFFSET, 0)) return 17;
-
-	mdelay(1);
-
-	if (c4_poke(card, DC21285_ARMCSR_BASE + DRAM_TIMING, DRAM_TIMING_DEF))
-		return 18;
-
-	if (c4_poke(card, DC21285_ARMCSR_BASE + DRAM_ADDR_SIZE_0, DRAM_AD_SZ_DEF0))
-		return 19;
-	if (c4_poke(card, DC21285_ARMCSR_BASE + DRAM_ADDR_SIZE_1, DRAM_AD_SZ_NULL))
-		return 20;
-	if (c4_poke(card, DC21285_ARMCSR_BASE + DRAM_ADDR_SIZE_2, DRAM_AD_SZ_NULL))
-		return 21;
-	if (c4_poke(card, DC21285_ARMCSR_BASE + DRAM_ADDR_SIZE_3, DRAM_AD_SZ_NULL))
-		return 22;
-
-	/* Transputer test */
-
-	if (c4_poke(card, 0x000000, 0x11111111)
-	    || c4_poke(card, 0x400000, 0x22222222)
-	       || c4_poke(card, 0x800000, 0x33333333)
-	       || c4_poke(card, 0xC00000, 0x44444444))
-		return 23;
-
-	if (c4_peek(card, 0x000000, &dummy) || dummy != 0x11111111
-	    || c4_peek(card, 0x400000, &dummy) || dummy != 0x22222222
-	       || c4_peek(card, 0x800000, &dummy) || dummy != 0x33333333
-	       || c4_peek(card, 0xC00000, &dummy) || dummy != 0x44444444)
-		return 24;
-
-	if (c4_poke(card, 0x000000, 0x55555555)
-	    || c4_poke(card, 0x400000, 0x66666666)
-	       || c4_poke(card, 0x800000, 0x77777777)
-	       || c4_poke(card, 0xC00000, 0x88888888))
-		return 25;
-
-	if (c4_peek(card, 0x000000, &dummy) || dummy != 0x55555555
-	    || c4_peek(card, 0x400000, &dummy) || dummy != 0x66666666
-	       || c4_peek(card, 0x800000, &dummy) || dummy != 0x77777777
-	       || c4_peek(card, 0xC00000, &dummy) || dummy != 0x88888888)
-		return 26;
-
-	return 0;
-}
-
-/* ------------------------------------------------------------- */
-
-static void c4_dispatch_tx(avmcard *card)
-{
-	avmcard_dmainfo *dma = card->dma;
-	struct sk_buff *skb;
-	u8 cmd, subcmd;
-	u16 len;
-	u32 txlen;
-	void *p;
-
-
-	if (card->csr & DBELL_DOWN_ARM) { /* tx busy */
-		return;
-	}
-
-	skb = skb_dequeue(&dma->send_queue);
-	if (!skb) {
-#ifdef AVM_C4_DEBUG
-		printk(KERN_DEBUG "%s: tx underrun\n", card->name);
-#endif
-		return;
-	}
-
-	len = CAPIMSG_LEN(skb->data);
-
-	if (len) {
-		cmd = CAPIMSG_COMMAND(skb->data);
-		subcmd = CAPIMSG_SUBCOMMAND(skb->data);
-
-		p = dma->sendbuf.dmabuf;
-
-		if (CAPICMD(cmd, subcmd) == CAPI_DATA_B3_REQ) {
-			u16 dlen = CAPIMSG_DATALEN(skb->data);
-			_put_byte(&p, SEND_DATA_B3_REQ);
-			_put_slice(&p, skb->data, len);
-			_put_slice(&p, skb->data + len, dlen);
-		} else {
-			_put_byte(&p, SEND_MESSAGE);
-			_put_slice(&p, skb->data, len);
-		}
-		txlen = (u8 *)p - (u8 *)dma->sendbuf.dmabuf;
-#ifdef AVM_C4_DEBUG
-		printk(KERN_DEBUG "%s: tx put msg len=%d\n", card->name, txlen);
-#endif
-	} else {
-		txlen = skb->len - 2;
-#ifdef AVM_C4_POLLDEBUG
-		if (skb->data[2] == SEND_POLLACK)
-			printk(KERN_INFO "%s: ack to c4\n", card->name);
-#endif
-#ifdef AVM_C4_DEBUG
-		printk(KERN_DEBUG "%s: tx put 0x%x len=%d\n",
-		       card->name, skb->data[2], txlen);
-#endif
-		skb_copy_from_linear_data_offset(skb, 2, dma->sendbuf.dmabuf,
-						 skb->len - 2);
-	}
-	txlen = (txlen + 3) & ~3;
-
-	c4outmeml(card->mbase + MBOX_DOWN_ADDR, dma->sendbuf.dmaaddr);
-	c4outmeml(card->mbase + MBOX_DOWN_LEN, txlen);
-
-	card->csr |= DBELL_DOWN_ARM;
-
-	c4outmeml(card->mbase + DOORBELL, DBELL_DOWN_ARM);
-
-	dev_kfree_skb_any(skb);
-}
-
-/* ------------------------------------------------------------- */
-
-static void queue_pollack(avmcard *card)
-{
-	struct sk_buff *skb;
-	void *p;
-
-	skb = alloc_skb(3, GFP_ATOMIC);
-	if (!skb) {
-		printk(KERN_CRIT "%s: no memory, lost poll ack\n",
-		       card->name);
-		return;
-	}
-	p = skb->data;
-	_put_byte(&p, 0);
-	_put_byte(&p, 0);
-	_put_byte(&p, SEND_POLLACK);
-	skb_put(skb, (u8 *)p - (u8 *)skb->data);
-
-	skb_queue_tail(&card->dma->send_queue, skb);
-	c4_dispatch_tx(card);
-}
-
-/* ------------------------------------------------------------- */
-
-static void c4_handle_rx(avmcard *card)
-{
-	avmcard_dmainfo *dma = card->dma;
-	struct capi_ctr *ctrl;
-	avmctrl_info *cinfo;
-	struct sk_buff *skb;
-	void *p = dma->recvbuf.dmabuf;
-	u32 ApplId, MsgLen, DataB3Len, NCCI, WindowSize;
-	u8 b1cmd =  _get_byte(&p);
-	u32 cidx;
-
-
-#ifdef AVM_C4_DEBUG
-	printk(KERN_DEBUG "%s: rx 0x%x len=%lu\n", card->name,
-	       b1cmd, (unsigned long)dma->recvlen);
-#endif
-
-	switch (b1cmd) {
-	case RECEIVE_DATA_B3_IND:
-
-		ApplId = (unsigned) _get_word(&p);
-		MsgLen = _get_slice(&p, card->msgbuf);
-		DataB3Len = _get_slice(&p, card->databuf);
-		cidx = CAPIMSG_CONTROLLER(card->msgbuf)-card->cardnr;
-		if (cidx >= card->nlogcontr) cidx = 0;
-		ctrl = &card->ctrlinfo[cidx].capi_ctrl;
-
-		if (MsgLen < 30) { /* not CAPI 64Bit */
-			memset(card->msgbuf + MsgLen, 0, 30 - MsgLen);
-			MsgLen = 30;
-			CAPIMSG_SETLEN(card->msgbuf, 30);
-		}
-		if (!(skb = alloc_skb(DataB3Len + MsgLen, GFP_ATOMIC))) {
-			printk(KERN_ERR "%s: incoming packet dropped\n",
-			       card->name);
-		} else {
-			skb_put_data(skb, card->msgbuf, MsgLen);
-			skb_put_data(skb, card->databuf, DataB3Len);
-			capi_ctr_handle_message(ctrl, ApplId, skb);
-		}
-		break;
-
-	case RECEIVE_MESSAGE:
-
-		ApplId = (unsigned) _get_word(&p);
-		MsgLen = _get_slice(&p, card->msgbuf);
-		cidx = CAPIMSG_CONTROLLER(card->msgbuf)-card->cardnr;
-		if (cidx >= card->nlogcontr) cidx = 0;
-		cinfo = &card->ctrlinfo[cidx];
-		ctrl = &card->ctrlinfo[cidx].capi_ctrl;
-
-		if (!(skb = alloc_skb(MsgLen, GFP_ATOMIC))) {
-			printk(KERN_ERR "%s: incoming packet dropped\n",
-			       card->name);
-		} else {
-			skb_put_data(skb, card->msgbuf, MsgLen);
-			if (CAPIMSG_CMD(skb->data) == CAPI_DATA_B3_CONF)
-				capilib_data_b3_conf(&cinfo->ncci_head, ApplId,
-						     CAPIMSG_NCCI(skb->data),
-						     CAPIMSG_MSGID(skb->data));
-
-			capi_ctr_handle_message(ctrl, ApplId, skb);
-		}
-		break;
-
-	case RECEIVE_NEW_NCCI:
-
-		ApplId = _get_word(&p);
-		NCCI = _get_word(&p);
-		WindowSize = _get_word(&p);
-		cidx = (NCCI & 0x7f) - card->cardnr;
-		if (cidx >= card->nlogcontr) cidx = 0;
-
-		capilib_new_ncci(&card->ctrlinfo[cidx].ncci_head, ApplId, NCCI, WindowSize);
-
-		break;
-
-	case RECEIVE_FREE_NCCI:
-
-		ApplId = _get_word(&p);
-		NCCI = _get_word(&p);
-
-		if (NCCI != 0xffffffff) {
-			cidx = (NCCI & 0x7f) - card->cardnr;
-			if (cidx >= card->nlogcontr) cidx = 0;
-			capilib_free_ncci(&card->ctrlinfo[cidx].ncci_head, ApplId, NCCI);
-		}
-		break;
-
-	case RECEIVE_START:
-#ifdef AVM_C4_POLLDEBUG
-		printk(KERN_INFO "%s: poll from c4\n", card->name);
-#endif
-		if (!suppress_pollack)
-			queue_pollack(card);
-		for (cidx = 0; cidx < card->nr_controllers; cidx++) {
-			ctrl = &card->ctrlinfo[cidx].capi_ctrl;
-			capi_ctr_resume_output(ctrl);
-		}
-		break;
-
-	case RECEIVE_STOP:
-		for (cidx = 0; cidx < card->nr_controllers; cidx++) {
-			ctrl = &card->ctrlinfo[cidx].capi_ctrl;
-			capi_ctr_suspend_output(ctrl);
-		}
-		break;
-
-	case RECEIVE_INIT:
-
-		cidx = card->nlogcontr;
-		if (cidx >= card->nr_controllers) {
-			printk(KERN_ERR "%s: card with %d controllers ??\n",
-			       card->name, cidx + 1);
-			break;
-		}
-		card->nlogcontr++;
-		cinfo = &card->ctrlinfo[cidx];
-		ctrl = &cinfo->capi_ctrl;
-		cinfo->versionlen = _get_slice(&p, cinfo->versionbuf);
-		b1_parse_version(cinfo);
-		printk(KERN_INFO "%s: %s-card (%s) now active\n",
-		       card->name,
-		       cinfo->version[VER_CARDTYPE],
-		       cinfo->version[VER_DRIVER]);
-		capi_ctr_ready(&cinfo->capi_ctrl);
-		break;
-
-	case RECEIVE_TASK_READY:
-		ApplId = (unsigned) _get_word(&p);
-		MsgLen = _get_slice(&p, card->msgbuf);
-		card->msgbuf[MsgLen] = 0;
-		while (MsgLen > 0
-		       && (card->msgbuf[MsgLen - 1] == '\n'
-			   || card->msgbuf[MsgLen - 1] == '\r')) {
-			card->msgbuf[MsgLen - 1] = 0;
-			MsgLen--;
-		}
-		printk(KERN_INFO "%s: task %d \"%s\" ready.\n",
-		       card->name, ApplId, card->msgbuf);
-		break;
-
-	case RECEIVE_DEBUGMSG:
-		MsgLen = _get_slice(&p, card->msgbuf);
-		card->msgbuf[MsgLen] = 0;
-		while (MsgLen > 0
-		       && (card->msgbuf[MsgLen - 1] == '\n'
-			   || card->msgbuf[MsgLen - 1] == '\r')) {
-			card->msgbuf[MsgLen - 1] = 0;
-			MsgLen--;
-		}
-		printk(KERN_INFO "%s: DEBUG: %s\n", card->name, card->msgbuf);
-		break;
-
-	default:
-		printk(KERN_ERR "%s: c4_interrupt: 0x%x ???\n",
-		       card->name, b1cmd);
-		return;
-	}
-}
-
-/* ------------------------------------------------------------- */
-
-static irqreturn_t c4_handle_interrupt(avmcard *card)
-{
-	unsigned long flags;
-	u32 status;
-
-	spin_lock_irqsave(&card->lock, flags);
-	status = c4inmeml(card->mbase + DOORBELL);
-
-	if (status & DBELL_RESET_HOST) {
-		u_int i;
-		c4outmeml(card->mbase + PCI_OUT_INT_MASK, 0x0c);
-		spin_unlock_irqrestore(&card->lock, flags);
-		if (card->nlogcontr == 0)
-			return IRQ_HANDLED;
-		printk(KERN_ERR "%s: unexpected reset\n", card->name);
-		for (i = 0; i < card->nr_controllers; i++) {
-			avmctrl_info *cinfo = &card->ctrlinfo[i];
-			memset(cinfo->version, 0, sizeof(cinfo->version));
-			spin_lock_irqsave(&card->lock, flags);
-			capilib_release(&cinfo->ncci_head);
-			spin_unlock_irqrestore(&card->lock, flags);
-			capi_ctr_down(&cinfo->capi_ctrl);
-		}
-		card->nlogcontr = 0;
-		return IRQ_HANDLED;
-	}
-
-	status &= (DBELL_UP_HOST | DBELL_DOWN_HOST);
-	if (!status) {
-		spin_unlock_irqrestore(&card->lock, flags);
-		return IRQ_HANDLED;
-	}
-	c4outmeml(card->mbase + DOORBELL, status);
-
-	if ((status & DBELL_UP_HOST) != 0) {
-		card->dma->recvlen = c4inmeml(card->mbase + MBOX_UP_LEN);
-		c4outmeml(card->mbase + MBOX_UP_LEN, 0);
-		c4_handle_rx(card);
-		card->dma->recvlen = 0;
-		c4outmeml(card->mbase + MBOX_UP_LEN, card->dma->recvbuf.size);
-		c4outmeml(card->mbase + DOORBELL, DBELL_UP_ARM);
-	}
-
-	if ((status & DBELL_DOWN_HOST) != 0) {
-		card->csr &= ~DBELL_DOWN_ARM;
-		c4_dispatch_tx(card);
-	} else if (card->csr & DBELL_DOWN_HOST) {
-		if (c4inmeml(card->mbase + MBOX_DOWN_LEN) == 0) {
-			card->csr &= ~DBELL_DOWN_ARM;
-			c4_dispatch_tx(card);
-		}
-	}
-	spin_unlock_irqrestore(&card->lock, flags);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t c4_interrupt(int interrupt, void *devptr)
-{
-	avmcard *card = devptr;
-
-	return c4_handle_interrupt(card);
-}
-
-/* ------------------------------------------------------------- */
-
-static void c4_send_init(avmcard *card)
-{
-	struct sk_buff *skb;
-	void *p;
-	unsigned long flags;
-
-	skb = alloc_skb(15, GFP_ATOMIC);
-	if (!skb) {
-		printk(KERN_CRIT "%s: no memory, lost register appl.\n",
-		       card->name);
-		return;
-	}
-	p = skb->data;
-	_put_byte(&p, 0);
-	_put_byte(&p, 0);
-	_put_byte(&p, SEND_INIT);
-	_put_word(&p, CAPI_MAXAPPL);
-	_put_word(&p, AVM_NCCI_PER_CHANNEL * 30);
-	_put_word(&p, card->cardnr - 1);
-	skb_put(skb, (u8 *)p - (u8 *)skb->data);
-
-	skb_queue_tail(&card->dma->send_queue, skb);
-	spin_lock_irqsave(&card->lock, flags);
-	c4_dispatch_tx(card);
-	spin_unlock_irqrestore(&card->lock, flags);
-}
-
-static int queue_sendconfigword(avmcard *card, u32 val)
-{
-	struct sk_buff *skb;
-	unsigned long flags;
-	void *p;
-
-	skb = alloc_skb(3 + 4, GFP_ATOMIC);
-	if (!skb) {
-		printk(KERN_CRIT "%s: no memory, send config\n",
-		       card->name);
-		return -ENOMEM;
-	}
-	p = skb->data;
-	_put_byte(&p, 0);
-	_put_byte(&p, 0);
-	_put_byte(&p, SEND_CONFIG);
-	_put_word(&p, val);
-	skb_put(skb, (u8 *)p - (u8 *)skb->data);
-
-	skb_queue_tail(&card->dma->send_queue, skb);
-	spin_lock_irqsave(&card->lock, flags);
-	c4_dispatch_tx(card);
-	spin_unlock_irqrestore(&card->lock, flags);
-	return 0;
-}
-
-static int queue_sendconfig(avmcard *card, char cval[4])
-{
-	struct sk_buff *skb;
-	unsigned long flags;
-	void *p;
-
-	skb = alloc_skb(3 + 4, GFP_ATOMIC);
-	if (!skb) {
-		printk(KERN_CRIT "%s: no memory, send config\n",
-		       card->name);
-		return -ENOMEM;
-	}
-	p = skb->data;
-	_put_byte(&p, 0);
-	_put_byte(&p, 0);
-	_put_byte(&p, SEND_CONFIG);
-	_put_byte(&p, cval[0]);
-	_put_byte(&p, cval[1]);
-	_put_byte(&p, cval[2]);
-	_put_byte(&p, cval[3]);
-	skb_put(skb, (u8 *)p - (u8 *)skb->data);
-
-	skb_queue_tail(&card->dma->send_queue, skb);
-
-	spin_lock_irqsave(&card->lock, flags);
-	c4_dispatch_tx(card);
-	spin_unlock_irqrestore(&card->lock, flags);
-	return 0;
-}
-
-static int c4_send_config(avmcard *card, capiloaddatapart *config)
-{
-	u8 val[4];
-	unsigned char *dp;
-	u_int left;
-	int retval;
-
-	if ((retval = queue_sendconfigword(card, 1)) != 0)
-		return retval;
-	if ((retval = queue_sendconfigword(card, config->len)) != 0)
-		return retval;
-
-	dp = config->data;
-	left = config->len;
-	while (left >= sizeof(u32)) {
-		if (config->user) {
-			if (copy_from_user(val, dp, sizeof(val)))
-				return -EFAULT;
-		} else {
-			memcpy(val, dp, sizeof(val));
-		}
-		if ((retval = queue_sendconfig(card, val)) != 0)
-			return retval;
-		left -= sizeof(val);
-		dp += sizeof(val);
-	}
-	if (left) {
-		memset(val, 0, sizeof(val));
-		if (config->user) {
-			if (copy_from_user(&val, dp, left))
-				return -EFAULT;
-		} else {
-			memcpy(&val, dp, left);
-		}
-		if ((retval = queue_sendconfig(card, val)) != 0)
-			return retval;
-	}
-
-	return 0;
-}
-
-static int c4_load_firmware(struct capi_ctr *ctrl, capiloaddata *data)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-	avmcard *card = cinfo->card;
-	int retval;
-
-	if ((retval = c4_load_t4file(card, &data->firmware))) {
-		printk(KERN_ERR "%s: failed to load t4file!!\n",
-		       card->name);
-		c4_reset(card);
-		return retval;
-	}
-
-	card->csr = 0;
-	c4outmeml(card->mbase + MBOX_UP_LEN, 0);
-	c4outmeml(card->mbase + MBOX_DOWN_LEN, 0);
-	c4outmeml(card->mbase + DOORBELL, DBELL_INIT);
-	mdelay(1);
-	c4outmeml(card->mbase + DOORBELL,
-		  DBELL_UP_HOST | DBELL_DOWN_HOST | DBELL_RESET_HOST);
-
-	c4outmeml(card->mbase + PCI_OUT_INT_MASK, 0x08);
-
-	card->dma->recvlen = 0;
-	c4outmeml(card->mbase + MBOX_UP_ADDR, card->dma->recvbuf.dmaaddr);
-	c4outmeml(card->mbase + MBOX_UP_LEN, card->dma->recvbuf.size);
-	c4outmeml(card->mbase + DOORBELL, DBELL_UP_ARM);
-
-	if (data->configuration.len > 0 && data->configuration.data) {
-		retval = c4_send_config(card, &data->configuration);
-		if (retval) {
-			printk(KERN_ERR "%s: failed to set config!!\n",
-			       card->name);
-			c4_reset(card);
-			return retval;
-		}
-	}
-
-	c4_send_init(card);
-
-	return 0;
-}
-
-
-static void c4_reset_ctr(struct capi_ctr *ctrl)
-{
-	avmcard *card = ((avmctrl_info *)(ctrl->driverdata))->card;
-	avmctrl_info *cinfo;
-	u_int i;
-	unsigned long flags;
-
-	spin_lock_irqsave(&card->lock, flags);
-
-	c4_reset(card);
-
-	spin_unlock_irqrestore(&card->lock, flags);
-
-	for (i = 0; i < card->nr_controllers; i++) {
-		cinfo = &card->ctrlinfo[i];
-		memset(cinfo->version, 0, sizeof(cinfo->version));
-		capi_ctr_down(&cinfo->capi_ctrl);
-	}
-	card->nlogcontr = 0;
-}
-
-static void c4_remove(struct pci_dev *pdev)
-{
-	avmcard *card = pci_get_drvdata(pdev);
-	avmctrl_info *cinfo;
-	u_int i;
-
-	if (!card)
-		return;
-
-	c4_reset(card);
-
-	for (i = 0; i < card->nr_controllers; i++) {
-		cinfo = &card->ctrlinfo[i];
-		detach_capi_ctr(&cinfo->capi_ctrl);
-	}
-
-	free_irq(card->irq, card);
-	iounmap(card->mbase);
-	release_region(card->port, AVMB1_PORTLEN);
-	avmcard_dma_free(card->dma);
-	pci_set_drvdata(pdev, NULL);
-	b1_free_card(card);
-}
-
-/* ------------------------------------------------------------- */
-
-
-static void c4_register_appl(struct capi_ctr *ctrl,
-			     u16 appl,
-			     capi_register_params *rp)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-	avmcard *card = cinfo->card;
-	struct sk_buff *skb;
-	int want = rp->level3cnt;
-	unsigned long flags;
-	int nconn;
-	void *p;
-
-	if (ctrl->cnr == card->cardnr) {
-
-		if (want > 0) nconn = want;
-		else nconn = ctrl->profile.nbchannel * 4 * -want;
-		if (nconn == 0) nconn = ctrl->profile.nbchannel * 4;
-
-		skb = alloc_skb(23, GFP_ATOMIC);
-		if (!skb) {
-			printk(KERN_CRIT "%s: no memory, lost register appl.\n",
-			       card->name);
-			return;
-		}
-		p = skb->data;
-		_put_byte(&p, 0);
-		_put_byte(&p, 0);
-		_put_byte(&p, SEND_REGISTER);
-		_put_word(&p, appl);
-		_put_word(&p, 1024 * (nconn + 1));
-		_put_word(&p, nconn);
-		_put_word(&p, rp->datablkcnt);
-		_put_word(&p, rp->datablklen);
-		skb_put(skb, (u8 *)p - (u8 *)skb->data);
-
-		skb_queue_tail(&card->dma->send_queue, skb);
-
-		spin_lock_irqsave(&card->lock, flags);
-		c4_dispatch_tx(card);
-		spin_unlock_irqrestore(&card->lock, flags);
-	}
-}
-
-/* ------------------------------------------------------------- */
-
-static void c4_release_appl(struct capi_ctr *ctrl, u16 appl)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-	avmcard *card = cinfo->card;
-	unsigned long flags;
-	struct sk_buff *skb;
-	void *p;
-
-	spin_lock_irqsave(&card->lock, flags);
-	capilib_release_appl(&cinfo->ncci_head, appl);
-	spin_unlock_irqrestore(&card->lock, flags);
-
-	if (ctrl->cnr == card->cardnr) {
-		skb = alloc_skb(7, GFP_ATOMIC);
-		if (!skb) {
-			printk(KERN_CRIT "%s: no memory, lost release appl.\n",
-			       card->name);
-			return;
-		}
-		p = skb->data;
-		_put_byte(&p, 0);
-		_put_byte(&p, 0);
-		_put_byte(&p, SEND_RELEASE);
-		_put_word(&p, appl);
-
-		skb_put(skb, (u8 *)p - (u8 *)skb->data);
-		skb_queue_tail(&card->dma->send_queue, skb);
-		spin_lock_irqsave(&card->lock, flags);
-		c4_dispatch_tx(card);
-		spin_unlock_irqrestore(&card->lock, flags);
-	}
-}
-
-/* ------------------------------------------------------------- */
-
-
-static u16 c4_send_message(struct capi_ctr *ctrl, struct sk_buff *skb)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-	avmcard *card = cinfo->card;
-	u16 retval = CAPI_NOERROR;
-	unsigned long flags;
-
-	spin_lock_irqsave(&card->lock, flags);
-	if (CAPIMSG_CMD(skb->data) == CAPI_DATA_B3_REQ) {
-		retval = capilib_data_b3_req(&cinfo->ncci_head,
-					     CAPIMSG_APPID(skb->data),
-					     CAPIMSG_NCCI(skb->data),
-					     CAPIMSG_MSGID(skb->data));
-	}
-	if (retval == CAPI_NOERROR) {
-		skb_queue_tail(&card->dma->send_queue, skb);
-		c4_dispatch_tx(card);
-	}
-	spin_unlock_irqrestore(&card->lock, flags);
-	return retval;
-}
-
-/* ------------------------------------------------------------- */
-
-static char *c4_procinfo(struct capi_ctr *ctrl)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-
-	if (!cinfo)
-		return "";
-	sprintf(cinfo->infobuf, "%s %s 0x%x %d 0x%lx",
-		cinfo->cardname[0] ? cinfo->cardname : "-",
-		cinfo->version[VER_DRIVER] ? cinfo->version[VER_DRIVER] : "-",
-		cinfo->card ? cinfo->card->port : 0x0,
-		cinfo->card ? cinfo->card->irq : 0,
-		cinfo->card ? cinfo->card->membase : 0
-		);
-	return cinfo->infobuf;
-}
-
-static int c4_proc_show(struct seq_file *m, void *v)
-{
-	struct capi_ctr *ctrl = m->private;
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-	avmcard *card = cinfo->card;
-	u8 flag;
-	char *s;
-
-	seq_printf(m, "%-16s %s\n", "name", card->name);
-	seq_printf(m, "%-16s 0x%x\n", "io", card->port);
-	seq_printf(m, "%-16s %d\n", "irq", card->irq);
-	seq_printf(m, "%-16s 0x%lx\n", "membase", card->membase);
-	switch (card->cardtype) {
-	case avm_b1isa: s = "B1 ISA"; break;
-	case avm_b1pci: s = "B1 PCI"; break;
-	case avm_b1pcmcia: s = "B1 PCMCIA"; break;
-	case avm_m1: s = "M1"; break;
-	case avm_m2: s = "M2"; break;
-	case avm_t1isa: s = "T1 ISA (HEMA)"; break;
-	case avm_t1pci: s = "T1 PCI"; break;
-	case avm_c4: s = "C4"; break;
-	case avm_c2: s = "C2"; break;
-	default: s = "???"; break;
-	}
-	seq_printf(m, "%-16s %s\n", "type", s);
-	if ((s = cinfo->version[VER_DRIVER]) != NULL)
-		seq_printf(m, "%-16s %s\n", "ver_driver", s);
-	if ((s = cinfo->version[VER_CARDTYPE]) != NULL)
-		seq_printf(m, "%-16s %s\n", "ver_cardtype", s);
-	if ((s = cinfo->version[VER_SERIAL]) != NULL)
-		seq_printf(m, "%-16s %s\n", "ver_serial", s);
-
-	if (card->cardtype != avm_m1) {
-		flag = ((u8 *)(ctrl->profile.manu))[3];
-		if (flag)
-			seq_printf(m, "%-16s%s%s%s%s%s%s%s\n",
-				   "protocol",
-				   (flag & 0x01) ? " DSS1" : "",
-				   (flag & 0x02) ? " CT1" : "",
-				   (flag & 0x04) ? " VN3" : "",
-				   (flag & 0x08) ? " NI1" : "",
-				   (flag & 0x10) ? " AUSTEL" : "",
-				   (flag & 0x20) ? " ESS" : "",
-				   (flag & 0x40) ? " 1TR6" : ""
-				);
-	}
-	if (card->cardtype != avm_m1) {
-		flag = ((u8 *)(ctrl->profile.manu))[5];
-		if (flag)
-			seq_printf(m, "%-16s%s%s%s%s\n",
-				   "linetype",
-				   (flag & 0x01) ? " point to point" : "",
-				   (flag & 0x02) ? " point to multipoint" : "",
-				   (flag & 0x08) ? " leased line without D-channel" : "",
-				   (flag & 0x04) ? " leased line with D-channel" : ""
-				);
-	}
-	seq_printf(m, "%-16s %s\n", "cardname", cinfo->cardname);
-
-	return 0;
-}
-
-/* ------------------------------------------------------------- */
-
-static int c4_add_card(struct capicardparams *p, struct pci_dev *dev,
-		       int nr_controllers)
-{
-	avmcard *card;
-	avmctrl_info *cinfo;
-	int retval;
-	int i;
-
-	card = b1_alloc_card(nr_controllers);
-	if (!card) {
-		printk(KERN_WARNING "c4: no memory.\n");
-		retval = -ENOMEM;
-		goto err;
-	}
-	card->dma = avmcard_dma_alloc("c4", dev, 2048 + 128, 2048 + 128);
-	if (!card->dma) {
-		printk(KERN_WARNING "c4: no memory.\n");
-		retval = -ENOMEM;
-		goto err_free;
-	}
-
-	sprintf(card->name, "c%d-%x", nr_controllers, p->port);
-	card->port = p->port;
-	card->irq = p->irq;
-	card->membase = p->membase;
-	card->cardtype = (nr_controllers == 4) ? avm_c4 : avm_c2;
-
-	if (!request_region(card->port, AVMB1_PORTLEN, card->name)) {
-		printk(KERN_WARNING "c4: ports 0x%03x-0x%03x in use.\n",
-		       card->port, card->port + AVMB1_PORTLEN);
-		retval = -EBUSY;
-		goto err_free_dma;
-	}
-
-	card->mbase = ioremap(card->membase, 128);
-	if (card->mbase == NULL) {
-		printk(KERN_NOTICE "c4: can't remap memory at 0x%lx\n",
-		       card->membase);
-		retval = -EIO;
-		goto err_release_region;
-	}
-
-	retval = c4_detect(card);
-	if (retval != 0) {
-		printk(KERN_NOTICE "c4: NO card at 0x%x error(%d)\n",
-		       card->port, retval);
-		retval = -EIO;
-		goto err_unmap;
-	}
-	c4_reset(card);
-
-	retval = request_irq(card->irq, c4_interrupt, IRQF_SHARED, card->name, card);
-	if (retval) {
-		printk(KERN_ERR "c4: unable to get IRQ %d.\n", card->irq);
-		retval = -EBUSY;
-		goto err_unmap;
-	}
-
-	for (i = 0; i < nr_controllers; i++) {
-		cinfo = &card->ctrlinfo[i];
-		cinfo->capi_ctrl.owner = THIS_MODULE;
-		cinfo->capi_ctrl.driver_name   = "c4";
-		cinfo->capi_ctrl.driverdata    = cinfo;
-		cinfo->capi_ctrl.register_appl = c4_register_appl;
-		cinfo->capi_ctrl.release_appl  = c4_release_appl;
-		cinfo->capi_ctrl.send_message  = c4_send_message;
-		cinfo->capi_ctrl.load_firmware = c4_load_firmware;
-		cinfo->capi_ctrl.reset_ctr     = c4_reset_ctr;
-		cinfo->capi_ctrl.procinfo      = c4_procinfo;
-		cinfo->capi_ctrl.proc_show     = c4_proc_show;
-		strcpy(cinfo->capi_ctrl.name, card->name);
-
-		retval = attach_capi_ctr(&cinfo->capi_ctrl);
-		if (retval) {
-			printk(KERN_ERR "c4: attach controller failed (%d).\n", i);
-			for (i--; i >= 0; i--) {
-				cinfo = &card->ctrlinfo[i];
-				detach_capi_ctr(&cinfo->capi_ctrl);
-			}
-			goto err_free_irq;
-		}
-		if (i == 0)
-			card->cardnr = cinfo->capi_ctrl.cnr;
-	}
-
-	printk(KERN_INFO "c4: AVM C%d at i/o %#x, irq %d, mem %#lx\n",
-	       nr_controllers, card->port, card->irq,
-	       card->membase);
-	pci_set_drvdata(dev, card);
-	return 0;
-
-err_free_irq:
-	free_irq(card->irq, card);
-err_unmap:
-	iounmap(card->mbase);
-err_release_region:
-	release_region(card->port, AVMB1_PORTLEN);
-err_free_dma:
-	avmcard_dma_free(card->dma);
-err_free:
-	b1_free_card(card);
-err:
-	return retval;
-}
-
-/* ------------------------------------------------------------- */
-
-static int c4_probe(struct pci_dev *dev, const struct pci_device_id *ent)
-{
-	int nr = ent->driver_data;
-	int retval = 0;
-	struct capicardparams param;
-
-	if (pci_enable_device(dev) < 0) {
-		printk(KERN_ERR "c4: failed to enable AVM-C%d\n", nr);
-		return -ENODEV;
-	}
-	pci_set_master(dev);
-
-	param.port = pci_resource_start(dev, 1);
-	param.irq = dev->irq;
-	param.membase = pci_resource_start(dev, 0);
-
-	printk(KERN_INFO "c4: PCI BIOS reports AVM-C%d at i/o %#x, irq %d, mem %#x\n",
-	       nr, param.port, param.irq, param.membase);
-
-	retval = c4_add_card(&param, dev, nr);
-	if (retval != 0) {
-		printk(KERN_ERR "c4: no AVM-C%d at i/o %#x, irq %d detected, mem %#x\n",
-		       nr, param.port, param.irq, param.membase);
-		pci_disable_device(dev);
-		return -ENODEV;
-	}
-	return 0;
-}
-
-static struct pci_driver c4_pci_driver = {
-	.name           = "c4",
-	.id_table       = c4_pci_tbl,
-	.probe          = c4_probe,
-	.remove         = c4_remove,
-};
-
-static struct capi_driver capi_driver_c2 = {
-	.name		= "c2",
-	.revision	= "1.0",
-};
-
-static struct capi_driver capi_driver_c4 = {
-	.name		= "c4",
-	.revision	= "1.0",
-};
-
-static int __init c4_init(void)
-{
-	char *p;
-	char rev[32];
-	int err;
-
-	if ((p = strchr(revision, ':')) != NULL && p[1]) {
-		strlcpy(rev, p + 2, 32);
-		if ((p = strchr(rev, '$')) != NULL && p > rev)
-			*(p - 1) = 0;
-	} else
-		strcpy(rev, "1.0");
-
-	err = pci_register_driver(&c4_pci_driver);
-	if (!err) {
-		strlcpy(capi_driver_c2.revision, rev, 32);
-		register_capi_driver(&capi_driver_c2);
-		strlcpy(capi_driver_c4.revision, rev, 32);
-		register_capi_driver(&capi_driver_c4);
-		printk(KERN_INFO "c4: revision %s\n", rev);
-	}
-	return err;
-}
-
-static void __exit c4_exit(void)
-{
-	unregister_capi_driver(&capi_driver_c2);
-	unregister_capi_driver(&capi_driver_c4);
-	pci_unregister_driver(&c4_pci_driver);
-}
-
-module_init(c4_init);
-module_exit(c4_exit);
diff --git a/drivers/staging/isdn/avm/t1isa.c b/drivers/staging/isdn/avm/t1isa.c
deleted file mode 100644
index 2153619c5b31..000000000000
--- a/drivers/staging/isdn/avm/t1isa.c
+++ /dev/null
@@ -1,594 +0,0 @@
-/* $Id: t1isa.c,v 1.1.2.3 2004/02/10 01:07:12 keil Exp $
- *
- * Module for AVM T1 HEMA-card.
- *
- * Copyright 1999 by Carsten Paeth <calle@calle.de>
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/skbuff.h>
-#include <linux/delay.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/capi.h>
-#include <linux/netdevice.h>
-#include <linux/kernelcapi.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/gfp.h>
-#include <asm/io.h>
-#include <linux/isdn/capicmd.h>
-#include <linux/isdn/capiutil.h>
-#include <linux/isdn/capilli.h>
-#include "avmcard.h"
-
-/* ------------------------------------------------------------- */
-
-static char *revision = "$Revision: 1.1.2.3 $";
-
-/* ------------------------------------------------------------- */
-
-MODULE_DESCRIPTION("CAPI4Linux: Driver for AVM T1 HEMA ISA card");
-MODULE_AUTHOR("Carsten Paeth");
-MODULE_LICENSE("GPL");
-
-/* ------------------------------------------------------------- */
-
-static int hema_irq_table[16] =
-{0,
- 0,
- 0,
- 0x80,				/* irq 3 */
- 0,
- 0x90,				/* irq 5 */
- 0,
- 0xA0,				/* irq 7 */
- 0,
- 0xB0,				/* irq 9 */
- 0xC0,				/* irq 10 */
- 0xD0,				/* irq 11 */
- 0xE0,				/* irq 12 */
- 0,
- 0,
- 0xF0,				/* irq 15 */
-};
-
-static int t1_detectandinit(unsigned int base, unsigned irq, int cardnr)
-{
-	unsigned char cregs[8];
-	unsigned char reverse_cardnr;
-	unsigned char dummy;
-	int i;
-
-	reverse_cardnr =   ((cardnr & 0x01) << 3) | ((cardnr & 0x02) << 1)
-		| ((cardnr & 0x04) >> 1) | ((cardnr & 0x08) >> 3);
-	cregs[0] = (HEMA_VERSION_ID << 4) | (reverse_cardnr & 0xf);
-	cregs[1] = 0x00; /* fast & slow link connected to CON1 */
-	cregs[2] = 0x05; /* fast link 20MBit, slow link 20 MBit */
-	cregs[3] = 0;
-	cregs[4] = 0x11; /* zero wait state */
-	cregs[5] = hema_irq_table[irq & 0xf];
-	cregs[6] = 0;
-	cregs[7] = 0;
-
-	/*
-	 * no one else should use the ISA bus in this moment,
-	 * but no function there to prevent this :-(
-	 * save_flags(flags); cli();
-	 */
-
-	/* board reset */
-	t1outp(base, T1_RESETBOARD, 0xf);
-	mdelay(100);
-	dummy = t1inp(base, T1_FASTLINK + T1_OUTSTAT); /* first read */
-
-	/* write config */
-	dummy = (base >> 4) & 0xff;
-	for (i = 1; i <= 0xf; i++) t1outp(base, i, dummy);
-	t1outp(base, HEMA_PAL_ID & 0xf, dummy);
-	t1outp(base, HEMA_PAL_ID >> 4, cregs[0]);
-	for (i = 1; i < 7; i++) t1outp(base, 0, cregs[i]);
-	t1outp(base, ((base >> 4)) & 0x3, cregs[7]);
-	/* restore_flags(flags); */
-
-	mdelay(100);
-	t1outp(base, T1_FASTLINK + T1_RESETLINK, 0);
-	t1outp(base, T1_SLOWLINK + T1_RESETLINK, 0);
-	mdelay(10);
-	t1outp(base, T1_FASTLINK + T1_RESETLINK, 1);
-	t1outp(base, T1_SLOWLINK + T1_RESETLINK, 1);
-	mdelay(100);
-	t1outp(base, T1_FASTLINK + T1_RESETLINK, 0);
-	t1outp(base, T1_SLOWLINK + T1_RESETLINK, 0);
-	mdelay(10);
-	t1outp(base, T1_FASTLINK + T1_ANALYSE, 0);
-	mdelay(5);
-	t1outp(base, T1_SLOWLINK + T1_ANALYSE, 0);
-
-	if (t1inp(base, T1_FASTLINK + T1_OUTSTAT) != 0x1) /* tx empty */
-		return 1;
-	if (t1inp(base, T1_FASTLINK + T1_INSTAT) != 0x0) /* rx empty */
-		return 2;
-	if (t1inp(base, T1_FASTLINK + T1_IRQENABLE) != 0x0)
-		return 3;
-	if ((t1inp(base, T1_FASTLINK + T1_FIFOSTAT) & 0xf0) != 0x70)
-		return 4;
-	if ((t1inp(base, T1_FASTLINK + T1_IRQMASTER) & 0x0e) != 0)
-		return 5;
-	if ((t1inp(base, T1_FASTLINK + T1_IDENT) & 0x7d) != 1)
-		return 6;
-	if (t1inp(base, T1_SLOWLINK + T1_OUTSTAT) != 0x1) /* tx empty */
-		return 7;
-	if ((t1inp(base, T1_SLOWLINK + T1_IRQMASTER) & 0x0e) != 0)
-		return 8;
-	if ((t1inp(base, T1_SLOWLINK + T1_IDENT) & 0x7d) != 0)
-		return 9;
-	return 0;
-}
-
-static irqreturn_t t1isa_interrupt(int interrupt, void *devptr)
-{
-	avmcard *card = devptr;
-	avmctrl_info *cinfo = &card->ctrlinfo[0];
-	struct capi_ctr *ctrl = &cinfo->capi_ctrl;
-	unsigned char b1cmd;
-	struct sk_buff *skb;
-
-	unsigned ApplId;
-	unsigned MsgLen;
-	unsigned DataB3Len;
-	unsigned NCCI;
-	unsigned WindowSize;
-	unsigned long flags;
-
-	spin_lock_irqsave(&card->lock, flags);
-
-	while (b1_rx_full(card->port)) {
-
-		b1cmd = b1_get_byte(card->port);
-
-		switch (b1cmd) {
-
-		case RECEIVE_DATA_B3_IND:
-
-			ApplId = (unsigned) b1_get_word(card->port);
-			MsgLen = t1_get_slice(card->port, card->msgbuf);
-			DataB3Len = t1_get_slice(card->port, card->databuf);
-			spin_unlock_irqrestore(&card->lock, flags);
-
-			if (MsgLen < 30) { /* not CAPI 64Bit */
-				memset(card->msgbuf + MsgLen, 0, 30 - MsgLen);
-				MsgLen = 30;
-				CAPIMSG_SETLEN(card->msgbuf, 30);
-			}
-			if (!(skb = alloc_skb(DataB3Len + MsgLen, GFP_ATOMIC))) {
-				printk(KERN_ERR "%s: incoming packet dropped\n",
-				       card->name);
-			} else {
-				skb_put_data(skb, card->msgbuf, MsgLen);
-				skb_put_data(skb, card->databuf, DataB3Len);
-				capi_ctr_handle_message(ctrl, ApplId, skb);
-			}
-			break;
-
-		case RECEIVE_MESSAGE:
-
-			ApplId = (unsigned) b1_get_word(card->port);
-			MsgLen = t1_get_slice(card->port, card->msgbuf);
-			if (!(skb = alloc_skb(MsgLen, GFP_ATOMIC))) {
-				spin_unlock_irqrestore(&card->lock, flags);
-				printk(KERN_ERR "%s: incoming packet dropped\n",
-				       card->name);
-			} else {
-				skb_put_data(skb, card->msgbuf, MsgLen);
-				if (CAPIMSG_CMD(skb->data) == CAPI_DATA_B3)
-					capilib_data_b3_conf(&cinfo->ncci_head, ApplId,
-							     CAPIMSG_NCCI(skb->data),
-							     CAPIMSG_MSGID(skb->data));
-				spin_unlock_irqrestore(&card->lock, flags);
-				capi_ctr_handle_message(ctrl, ApplId, skb);
-			}
-			break;
-
-		case RECEIVE_NEW_NCCI:
-
-			ApplId = b1_get_word(card->port);
-			NCCI = b1_get_word(card->port);
-			WindowSize = b1_get_word(card->port);
-			capilib_new_ncci(&cinfo->ncci_head, ApplId, NCCI, WindowSize);
-			spin_unlock_irqrestore(&card->lock, flags);
-			break;
-
-		case RECEIVE_FREE_NCCI:
-
-			ApplId = b1_get_word(card->port);
-			NCCI = b1_get_word(card->port);
-			if (NCCI != 0xffffffff)
-				capilib_free_ncci(&cinfo->ncci_head, ApplId, NCCI);
-			spin_unlock_irqrestore(&card->lock, flags);
-			break;
-
-		case RECEIVE_START:
-			b1_put_byte(card->port, SEND_POLLACK);
-			spin_unlock_irqrestore(&card->lock, flags);
-			capi_ctr_resume_output(ctrl);
-			break;
-
-		case RECEIVE_STOP:
-			spin_unlock_irqrestore(&card->lock, flags);
-			capi_ctr_suspend_output(ctrl);
-			break;
-
-		case RECEIVE_INIT:
-
-			cinfo->versionlen = t1_get_slice(card->port, cinfo->versionbuf);
-			spin_unlock_irqrestore(&card->lock, flags);
-			b1_parse_version(cinfo);
-			printk(KERN_INFO "%s: %s-card (%s) now active\n",
-			       card->name,
-			       cinfo->version[VER_CARDTYPE],
-			       cinfo->version[VER_DRIVER]);
-			capi_ctr_ready(ctrl);
-			break;
-
-		case RECEIVE_TASK_READY:
-			ApplId = (unsigned) b1_get_word(card->port);
-			MsgLen = t1_get_slice(card->port, card->msgbuf);
-			spin_unlock_irqrestore(&card->lock, flags);
-			card->msgbuf[MsgLen] = 0;
-			while (MsgLen > 0
-			       && (card->msgbuf[MsgLen - 1] == '\n'
-				   || card->msgbuf[MsgLen - 1] == '\r')) {
-				card->msgbuf[MsgLen - 1] = 0;
-				MsgLen--;
-			}
-			printk(KERN_INFO "%s: task %d \"%s\" ready.\n",
-			       card->name, ApplId, card->msgbuf);
-			break;
-
-		case RECEIVE_DEBUGMSG:
-			MsgLen = t1_get_slice(card->port, card->msgbuf);
-			spin_unlock_irqrestore(&card->lock, flags);
-			card->msgbuf[MsgLen] = 0;
-			while (MsgLen > 0
-			       && (card->msgbuf[MsgLen - 1] == '\n'
-				   || card->msgbuf[MsgLen - 1] == '\r')) {
-				card->msgbuf[MsgLen - 1] = 0;
-				MsgLen--;
-			}
-			printk(KERN_INFO "%s: DEBUG: %s\n", card->name, card->msgbuf);
-			break;
-
-
-		case 0xff:
-			spin_unlock_irqrestore(&card->lock, flags);
-			printk(KERN_ERR "%s: card reseted ?\n", card->name);
-			return IRQ_HANDLED;
-		default:
-			spin_unlock_irqrestore(&card->lock, flags);
-			printk(KERN_ERR "%s: b1_interrupt: 0x%x ???\n",
-			       card->name, b1cmd);
-			return IRQ_NONE;
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-/* ------------------------------------------------------------- */
-
-static int t1isa_load_firmware(struct capi_ctr *ctrl, capiloaddata *data)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-	avmcard *card = cinfo->card;
-	unsigned int port = card->port;
-	unsigned long flags;
-	int retval;
-
-	t1_disable_irq(port);
-	b1_reset(port);
-
-	if ((retval = b1_load_t4file(card, &data->firmware))) {
-		b1_reset(port);
-		printk(KERN_ERR "%s: failed to load t4file!!\n",
-		       card->name);
-		return retval;
-	}
-
-	if (data->configuration.len > 0 && data->configuration.data) {
-		if ((retval = b1_load_config(card, &data->configuration))) {
-			b1_reset(port);
-			printk(KERN_ERR "%s: failed to load config!!\n",
-			       card->name);
-			return retval;
-		}
-	}
-
-	if (!b1_loaded(card)) {
-		printk(KERN_ERR "%s: failed to load t4file.\n", card->name);
-		return -EIO;
-	}
-
-	spin_lock_irqsave(&card->lock, flags);
-	b1_setinterrupt(port, card->irq, card->cardtype);
-	b1_put_byte(port, SEND_INIT);
-	b1_put_word(port, CAPI_MAXAPPL);
-	b1_put_word(port, AVM_NCCI_PER_CHANNEL * 30);
-	b1_put_word(port, ctrl->cnr - 1);
-	spin_unlock_irqrestore(&card->lock, flags);
-
-	return 0;
-}
-
-static void t1isa_reset_ctr(struct capi_ctr *ctrl)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-	avmcard *card = cinfo->card;
-	unsigned int port = card->port;
-	unsigned long flags;
-
-	t1_disable_irq(port);
-	b1_reset(port);
-	b1_reset(port);
-
-	memset(cinfo->version, 0, sizeof(cinfo->version));
-	spin_lock_irqsave(&card->lock, flags);
-	capilib_release(&cinfo->ncci_head);
-	spin_unlock_irqrestore(&card->lock, flags);
-	capi_ctr_down(ctrl);
-}
-
-static void t1isa_remove(struct pci_dev *pdev)
-{
-	avmctrl_info *cinfo = pci_get_drvdata(pdev);
-	avmcard *card;
-
-	if (!cinfo)
-		return;
-
-	card = cinfo->card;
-
-	t1_disable_irq(card->port);
-	b1_reset(card->port);
-	b1_reset(card->port);
-	t1_reset(card->port);
-
-	detach_capi_ctr(&cinfo->capi_ctrl);
-	free_irq(card->irq, card);
-	release_region(card->port, AVMB1_PORTLEN);
-	b1_free_card(card);
-}
-
-/* ------------------------------------------------------------- */
-
-static u16 t1isa_send_message(struct capi_ctr *ctrl, struct sk_buff *skb);
-static char *t1isa_procinfo(struct capi_ctr *ctrl);
-
-static int t1isa_probe(struct pci_dev *pdev, int cardnr)
-{
-	avmctrl_info *cinfo;
-	avmcard *card;
-	int retval;
-
-	card = b1_alloc_card(1);
-	if (!card) {
-		printk(KERN_WARNING "t1isa: no memory.\n");
-		retval = -ENOMEM;
-		goto err;
-	}
-
-	cinfo = card->ctrlinfo;
-	card->port = pci_resource_start(pdev, 0);
-	card->irq = pdev->irq;
-	card->cardtype = avm_t1isa;
-	card->cardnr = cardnr;
-	sprintf(card->name, "t1isa-%x", card->port);
-
-	if (!(((card->port & 0x7) == 0) && ((card->port & 0x30) != 0x30))) {
-		printk(KERN_WARNING "t1isa: invalid port 0x%x.\n", card->port);
-		retval = -EINVAL;
-		goto err_free;
-	}
-	if (hema_irq_table[card->irq & 0xf] == 0) {
-		printk(KERN_WARNING "t1isa: irq %d not valid.\n", card->irq);
-		retval = -EINVAL;
-		goto err_free;
-	}
-	if (!request_region(card->port, AVMB1_PORTLEN, card->name)) {
-		printk(KERN_INFO "t1isa: ports 0x%03x-0x%03x in use.\n",
-		       card->port, card->port + AVMB1_PORTLEN);
-		retval = -EBUSY;
-		goto err_free;
-	}
-	retval = request_irq(card->irq, t1isa_interrupt, 0, card->name, card);
-	if (retval) {
-		printk(KERN_INFO "t1isa: unable to get IRQ %d.\n", card->irq);
-		retval = -EBUSY;
-		goto err_release_region;
-	}
-
-	if ((retval = t1_detectandinit(card->port, card->irq, card->cardnr)) != 0) {
-		printk(KERN_INFO "t1isa: NO card at 0x%x (%d)\n",
-		       card->port, retval);
-		retval = -ENODEV;
-		goto err_free_irq;
-	}
-	t1_disable_irq(card->port);
-	b1_reset(card->port);
-
-	cinfo->capi_ctrl.owner = THIS_MODULE;
-	cinfo->capi_ctrl.driver_name   = "t1isa";
-	cinfo->capi_ctrl.driverdata    = cinfo;
-	cinfo->capi_ctrl.register_appl = b1_register_appl;
-	cinfo->capi_ctrl.release_appl  = b1_release_appl;
-	cinfo->capi_ctrl.send_message  = t1isa_send_message;
-	cinfo->capi_ctrl.load_firmware = t1isa_load_firmware;
-	cinfo->capi_ctrl.reset_ctr     = t1isa_reset_ctr;
-	cinfo->capi_ctrl.procinfo      = t1isa_procinfo;
-	cinfo->capi_ctrl.proc_show     = b1_proc_show;
-	strcpy(cinfo->capi_ctrl.name, card->name);
-
-	retval = attach_capi_ctr(&cinfo->capi_ctrl);
-	if (retval) {
-		printk(KERN_INFO "t1isa: attach controller failed.\n");
-		goto err_free_irq;
-	}
-
-	printk(KERN_INFO "t1isa: AVM T1 ISA at i/o %#x, irq %d, card %d\n",
-	       card->port, card->irq, card->cardnr);
-
-	pci_set_drvdata(pdev, cinfo);
-	return 0;
-
-err_free_irq:
-	free_irq(card->irq, card);
-err_release_region:
-	release_region(card->port, AVMB1_PORTLEN);
-err_free:
-	b1_free_card(card);
-err:
-	return retval;
-}
-
-static u16 t1isa_send_message(struct capi_ctr *ctrl, struct sk_buff *skb)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-	avmcard *card = cinfo->card;
-	unsigned int port = card->port;
-	unsigned long flags;
-	u16 len = CAPIMSG_LEN(skb->data);
-	u8 cmd = CAPIMSG_COMMAND(skb->data);
-	u8 subcmd = CAPIMSG_SUBCOMMAND(skb->data);
-	u16 dlen, retval;
-
-	spin_lock_irqsave(&card->lock, flags);
-	if (CAPICMD(cmd, subcmd) == CAPI_DATA_B3_REQ) {
-		retval = capilib_data_b3_req(&cinfo->ncci_head,
-					     CAPIMSG_APPID(skb->data),
-					     CAPIMSG_NCCI(skb->data),
-					     CAPIMSG_MSGID(skb->data));
-		if (retval != CAPI_NOERROR) {
-			spin_unlock_irqrestore(&card->lock, flags);
-			return retval;
-		}
-		dlen = CAPIMSG_DATALEN(skb->data);
-
-		b1_put_byte(port, SEND_DATA_B3_REQ);
-		t1_put_slice(port, skb->data, len);
-		t1_put_slice(port, skb->data + len, dlen);
-	} else {
-		b1_put_byte(port, SEND_MESSAGE);
-		t1_put_slice(port, skb->data, len);
-	}
-	spin_unlock_irqrestore(&card->lock, flags);
-	dev_kfree_skb_any(skb);
-	return CAPI_NOERROR;
-}
-/* ------------------------------------------------------------- */
-
-static char *t1isa_procinfo(struct capi_ctr *ctrl)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-
-	if (!cinfo)
-		return "";
-	sprintf(cinfo->infobuf, "%s %s 0x%x %d %d",
-		cinfo->cardname[0] ? cinfo->cardname : "-",
-		cinfo->version[VER_DRIVER] ? cinfo->version[VER_DRIVER] : "-",
-		cinfo->card ? cinfo->card->port : 0x0,
-		cinfo->card ? cinfo->card->irq : 0,
-		cinfo->card ? cinfo->card->cardnr : 0
-		);
-	return cinfo->infobuf;
-}
-
-
-/* ------------------------------------------------------------- */
-
-#define MAX_CARDS 4
-static struct pci_dev isa_dev[MAX_CARDS];
-static int io[MAX_CARDS];
-static int irq[MAX_CARDS];
-static int cardnr[MAX_CARDS];
-
-module_param_hw_array(io, int, ioport, NULL, 0);
-module_param_hw_array(irq, int, irq, NULL, 0);
-module_param_array(cardnr, int, NULL, 0);
-MODULE_PARM_DESC(io, "I/O base address(es)");
-MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
-MODULE_PARM_DESC(cardnr, "Card number(s) (as jumpered)");
-
-static int t1isa_add_card(struct capi_driver *driver, capicardparams *data)
-{
-	int i;
-
-	for (i = 0; i < MAX_CARDS; i++) {
-		if (isa_dev[i].resource[0].start)
-			continue;
-
-		isa_dev[i].resource[0].start = data->port;
-		isa_dev[i].irq = data->irq;
-
-		if (t1isa_probe(&isa_dev[i], data->cardnr) == 0)
-			return 0;
-	}
-	return -ENODEV;
-}
-
-static struct capi_driver capi_driver_t1isa = {
-	.name		= "t1isa",
-	.revision	= "1.0",
-	.add_card       = t1isa_add_card,
-};
-
-static int __init t1isa_init(void)
-{
-	char rev[32];
-	char *p;
-	int i;
-
-	if ((p = strchr(revision, ':')) != NULL && p[1]) {
-		strlcpy(rev, p + 2, 32);
-		if ((p = strchr(rev, '$')) != NULL && p > rev)
-			*(p - 1) = 0;
-	} else
-		strcpy(rev, "1.0");
-
-	for (i = 0; i < MAX_CARDS; i++) {
-		if (!io[i])
-			break;
-
-		isa_dev[i].resource[0].start = io[i];
-		isa_dev[i].irq = irq[i];
-
-		if (t1isa_probe(&isa_dev[i], cardnr[i]) != 0)
-			return -ENODEV;
-	}
-
-	strlcpy(capi_driver_t1isa.revision, rev, 32);
-	register_capi_driver(&capi_driver_t1isa);
-	printk(KERN_INFO "t1isa: revision %s\n", rev);
-
-	return 0;
-}
-
-static void __exit t1isa_exit(void)
-{
-	int i;
-
-	unregister_capi_driver(&capi_driver_t1isa);
-	for (i = 0; i < MAX_CARDS; i++) {
-		if (!io[i])
-			break;
-
-		t1isa_remove(&isa_dev[i]);
-	}
-}
-
-module_init(t1isa_init);
-module_exit(t1isa_exit);
diff --git a/drivers/staging/isdn/avm/t1pci.c b/drivers/staging/isdn/avm/t1pci.c
deleted file mode 100644
index f5ed1d5004c9..000000000000
--- a/drivers/staging/isdn/avm/t1pci.c
+++ /dev/null
@@ -1,259 +0,0 @@
-/* $Id: t1pci.c,v 1.1.2.2 2004/01/16 21:09:27 keil Exp $
- *
- * Module for AVM T1 PCI-card.
- *
- * Copyright 1999 by Carsten Paeth <calle@calle.de>
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/skbuff.h>
-#include <linux/delay.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/capi.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <linux/isdn/capicmd.h>
-#include <linux/isdn/capiutil.h>
-#include <linux/isdn/capilli.h>
-#include "avmcard.h"
-
-#undef CONFIG_T1PCI_DEBUG
-#undef CONFIG_T1PCI_POLLDEBUG
-
-/* ------------------------------------------------------------- */
-static char *revision = "$Revision: 1.1.2.2 $";
-/* ------------------------------------------------------------- */
-
-static struct pci_device_id t1pci_pci_tbl[] = {
-	{ PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_T1, PCI_ANY_ID, PCI_ANY_ID },
-	{ }				/* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(pci, t1pci_pci_tbl);
-MODULE_DESCRIPTION("CAPI4Linux: Driver for AVM T1 PCI card");
-MODULE_AUTHOR("Carsten Paeth");
-MODULE_LICENSE("GPL");
-
-/* ------------------------------------------------------------- */
-
-static char *t1pci_procinfo(struct capi_ctr *ctrl);
-
-static int t1pci_add_card(struct capicardparams *p, struct pci_dev *pdev)
-{
-	avmcard *card;
-	avmctrl_info *cinfo;
-	int retval;
-
-	card = b1_alloc_card(1);
-	if (!card) {
-		printk(KERN_WARNING "t1pci: no memory.\n");
-		retval = -ENOMEM;
-		goto err;
-	}
-
-	card->dma = avmcard_dma_alloc("t1pci", pdev, 2048 + 128, 2048 + 128);
-	if (!card->dma) {
-		printk(KERN_WARNING "t1pci: no memory.\n");
-		retval = -ENOMEM;
-		goto err_free;
-	}
-
-	cinfo = card->ctrlinfo;
-	sprintf(card->name, "t1pci-%x", p->port);
-	card->port = p->port;
-	card->irq = p->irq;
-	card->membase = p->membase;
-	card->cardtype = avm_t1pci;
-
-	if (!request_region(card->port, AVMB1_PORTLEN, card->name)) {
-		printk(KERN_WARNING "t1pci: ports 0x%03x-0x%03x in use.\n",
-		       card->port, card->port + AVMB1_PORTLEN);
-		retval = -EBUSY;
-		goto err_free_dma;
-	}
-
-	card->mbase = ioremap(card->membase, 64);
-	if (!card->mbase) {
-		printk(KERN_NOTICE "t1pci: can't remap memory at 0x%lx\n",
-		       card->membase);
-		retval = -EIO;
-		goto err_release_region;
-	}
-
-	b1dma_reset(card);
-
-	retval = t1pci_detect(card);
-	if (retval != 0) {
-		if (retval < 6)
-			printk(KERN_NOTICE "t1pci: NO card at 0x%x (%d)\n",
-			       card->port, retval);
-		else
-			printk(KERN_NOTICE "t1pci: card at 0x%x, but cable not connected or T1 has no power (%d)\n",
-			       card->port, retval);
-		retval = -EIO;
-		goto err_unmap;
-	}
-	b1dma_reset(card);
-
-	retval = request_irq(card->irq, b1dma_interrupt, IRQF_SHARED, card->name, card);
-	if (retval) {
-		printk(KERN_ERR "t1pci: unable to get IRQ %d.\n", card->irq);
-		retval = -EBUSY;
-		goto err_unmap;
-	}
-
-	cinfo->capi_ctrl.owner         = THIS_MODULE;
-	cinfo->capi_ctrl.driver_name   = "t1pci";
-	cinfo->capi_ctrl.driverdata    = cinfo;
-	cinfo->capi_ctrl.register_appl = b1dma_register_appl;
-	cinfo->capi_ctrl.release_appl  = b1dma_release_appl;
-	cinfo->capi_ctrl.send_message  = b1dma_send_message;
-	cinfo->capi_ctrl.load_firmware = b1dma_load_firmware;
-	cinfo->capi_ctrl.reset_ctr     = b1dma_reset_ctr;
-	cinfo->capi_ctrl.procinfo      = t1pci_procinfo;
-	cinfo->capi_ctrl.proc_show     = b1dma_proc_show;
-	strcpy(cinfo->capi_ctrl.name, card->name);
-
-	retval = attach_capi_ctr(&cinfo->capi_ctrl);
-	if (retval) {
-		printk(KERN_ERR "t1pci: attach controller failed.\n");
-		retval = -EBUSY;
-		goto err_free_irq;
-	}
-	card->cardnr = cinfo->capi_ctrl.cnr;
-
-	printk(KERN_INFO "t1pci: AVM T1 PCI at i/o %#x, irq %d, mem %#lx\n",
-	       card->port, card->irq, card->membase);
-
-	pci_set_drvdata(pdev, card);
-	return 0;
-
-err_free_irq:
-	free_irq(card->irq, card);
-err_unmap:
-	iounmap(card->mbase);
-err_release_region:
-	release_region(card->port, AVMB1_PORTLEN);
-err_free_dma:
-	avmcard_dma_free(card->dma);
-err_free:
-	b1_free_card(card);
-err:
-	return retval;
-}
-
-/* ------------------------------------------------------------- */
-
-static void t1pci_remove(struct pci_dev *pdev)
-{
-	avmcard *card = pci_get_drvdata(pdev);
-	avmctrl_info *cinfo = card->ctrlinfo;
-
-	b1dma_reset(card);
-
-	detach_capi_ctr(&cinfo->capi_ctrl);
-	free_irq(card->irq, card);
-	iounmap(card->mbase);
-	release_region(card->port, AVMB1_PORTLEN);
-	avmcard_dma_free(card->dma);
-	b1_free_card(card);
-}
-
-/* ------------------------------------------------------------- */
-
-static char *t1pci_procinfo(struct capi_ctr *ctrl)
-{
-	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);
-
-	if (!cinfo)
-		return "";
-	sprintf(cinfo->infobuf, "%s %s 0x%x %d 0x%lx",
-		cinfo->cardname[0] ? cinfo->cardname : "-",
-		cinfo->version[VER_DRIVER] ? cinfo->version[VER_DRIVER] : "-",
-		cinfo->card ? cinfo->card->port : 0x0,
-		cinfo->card ? cinfo->card->irq : 0,
-		cinfo->card ? cinfo->card->membase : 0
-		);
-	return cinfo->infobuf;
-}
-
-/* ------------------------------------------------------------- */
-
-static int t1pci_probe(struct pci_dev *dev, const struct pci_device_id *ent)
-{
-	struct capicardparams param;
-	int retval;
-
-	if (pci_enable_device(dev) < 0) {
-		printk(KERN_ERR	"t1pci: failed to enable AVM-T1-PCI\n");
-		return -ENODEV;
-	}
-	pci_set_master(dev);
-
-	param.port = pci_resource_start(dev, 1);
-	param.irq = dev->irq;
-	param.membase = pci_resource_start(dev, 0);
-
-	printk(KERN_INFO "t1pci: PCI BIOS reports AVM-T1-PCI at i/o %#x, irq %d, mem %#x\n",
-	       param.port, param.irq, param.membase);
-
-	retval = t1pci_add_card(&param, dev);
-	if (retval != 0) {
-		printk(KERN_ERR "t1pci: no AVM-T1-PCI at i/o %#x, irq %d detected, mem %#x\n",
-		       param.port, param.irq, param.membase);
-		pci_disable_device(dev);
-		return -ENODEV;
-	}
-	return 0;
-}
-
-static struct pci_driver t1pci_pci_driver = {
-	.name           = "t1pci",
-	.id_table       = t1pci_pci_tbl,
-	.probe          = t1pci_probe,
-	.remove         = t1pci_remove,
-};
-
-static struct capi_driver capi_driver_t1pci = {
-	.name		= "t1pci",
-	.revision	= "1.0",
-};
-
-static int __init t1pci_init(void)
-{
-	char *p;
-	char rev[32];
-	int err;
-
-	if ((p = strchr(revision, ':')) != NULL && p[1]) {
-		strlcpy(rev, p + 2, 32);
-		if ((p = strchr(rev, '$')) != NULL && p > rev)
-			*(p - 1) = 0;
-	} else
-		strcpy(rev, "1.0");
-
-	err = pci_register_driver(&t1pci_pci_driver);
-	if (!err) {
-		strlcpy(capi_driver_t1pci.revision, rev, 32);
-		register_capi_driver(&capi_driver_t1pci);
-		printk(KERN_INFO "t1pci: revision %s\n", rev);
-	}
-	return err;
-}
-
-static void __exit t1pci_exit(void)
-{
-	unregister_capi_driver(&capi_driver_t1pci);
-	pci_unregister_driver(&t1pci_pci_driver);
-}
-
-module_init(t1pci_init);
-module_exit(t1pci_exit);
diff --git a/drivers/staging/isdn/gigaset/Kconfig b/drivers/staging/isdn/gigaset/Kconfig
deleted file mode 100644
index c593105b3600..000000000000
--- a/drivers/staging/isdn/gigaset/Kconfig
+++ /dev/null
@@ -1,62 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-menuconfig ISDN_DRV_GIGASET
-	tristate "Siemens Gigaset support"
-	depends on TTY
-	select CRC_CCITT
-	select BITREVERSE
-	help
-	  This driver supports the Siemens Gigaset SX205/255 family of
-	  ISDN DECT bases, including the predecessors Gigaset 3070/3075
-	  and 4170/4175 and their T-Com versions Sinus 45isdn and Sinus
-	  721X.
-	  If you have one of these devices, say M here and for at least
-	  one of the connection specific parts that follow.
-	  This will build a module called "gigaset".
-	  Note: If you build your ISDN subsystem (ISDN_CAPI or ISDN_I4L)
-	  as a module, you have to build this driver as a module too,
-	  otherwise the Gigaset device won't show up as an ISDN device.
-
-if ISDN_DRV_GIGASET
-
-config GIGASET_CAPI
-	bool "Gigaset CAPI support"
-	depends on ISDN_CAPI='y'||(ISDN_CAPI='m'&&ISDN_DRV_GIGASET='m')
-	default 'y'
-	help
-	  Build the Gigaset driver as a CAPI 2.0 driver interfacing with
-	  the Kernel CAPI subsystem. To use it with the old ISDN4Linux
-	  subsystem you'll have to enable the capidrv glue driver.
-	  (select ISDN_CAPI_CAPIDRV.)
-	  Say N to build the old native ISDN4Linux variant.
-	  If unsure, say Y.
-
-config GIGASET_BASE
-	tristate "Gigaset base station support"
-	depends on USB
-	help
-	  Say M here if you want to use the USB interface of the Gigaset
-	  base for connection to your system.
-	  This will build a module called "bas_gigaset".
-
-config GIGASET_M105
-	tristate "Gigaset M105 support"
-	depends on USB
-	help
-	  Say M here if you want to connect to the Gigaset base via DECT
-	  using a Gigaset M105 (Sinus 45 Data 2) USB DECT device.
-	  This will build a module called "usb_gigaset".
-
-config GIGASET_M101
-	tristate "Gigaset M101 support"
-	help
-	  Say M here if you want to connect to the Gigaset base via DECT
-	  using a Gigaset M101 (Sinus 45 Data 1) RS232 DECT device.
-	  This will build a module called "ser_gigaset".
-
-config GIGASET_DEBUG
-	bool "Gigaset debugging"
-	help
-	  This enables debugging code in the Gigaset drivers.
-	  If in doubt, say yes.
-
-endif # ISDN_DRV_GIGASET
diff --git a/drivers/staging/isdn/gigaset/Makefile b/drivers/staging/isdn/gigaset/Makefile
deleted file mode 100644
index 9c010891dcd7..000000000000
--- a/drivers/staging/isdn/gigaset/Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-gigaset-y := common.o interface.o proc.o ev-layer.o asyncdata.o
-
-ifdef CONFIG_GIGASET_CAPI
-gigaset-y += capi.o
-else
-gigaset-y += dummyll.o
-endif
-
-usb_gigaset-y := usb-gigaset.o
-ser_gigaset-y := ser-gigaset.o
-bas_gigaset-y := bas-gigaset.o isocdata.o
-
-obj-$(CONFIG_ISDN_DRV_GIGASET) += gigaset.o
-obj-$(CONFIG_GIGASET_M105) += usb_gigaset.o
-obj-$(CONFIG_GIGASET_BASE) += bas_gigaset.o
-obj-$(CONFIG_GIGASET_M101) += ser_gigaset.o
diff --git a/drivers/staging/isdn/gigaset/asyncdata.c b/drivers/staging/isdn/gigaset/asyncdata.c
deleted file mode 100644
index a34b3c9d8a71..000000000000
--- a/drivers/staging/isdn/gigaset/asyncdata.c
+++ /dev/null
@@ -1,606 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Common data handling layer for ser_gigaset and usb_gigaset
- *
- * Copyright (c) 2005 by Tilman Schmidt <tilman@imap.cc>,
- *                       Hansjoerg Lipp <hjlipp@web.de>,
- *                       Stefan Eilers.
- *
- * =====================================================================
- * =====================================================================
- */
-
-#include "gigaset.h"
-#include <linux/crc-ccitt.h>
-#include <linux/bitrev.h>
-#include <linux/export.h>
-
-/* check if byte must be stuffed/escaped
- * I'm not sure which data should be encoded.
- * Therefore I will go the hard way and encode every value
- * less than 0x20, the flag sequence and the control escape char.
- */
-static inline int muststuff(unsigned char c)
-{
-	if (c < PPP_TRANS) return 1;
-	if (c == PPP_FLAG) return 1;
-	if (c == PPP_ESCAPE) return 1;
-	/* other possible candidates: */
-	/* 0x91: XON with parity set */
-	/* 0x93: XOFF with parity set */
-	return 0;
-}
-
-/* == data input =========================================================== */
-
-/* process a block of received bytes in command mode
- * (mstate != MS_LOCKED && (inputstate & INS_command))
- * Append received bytes to the command response buffer and forward them
- * line by line to the response handler. Exit whenever a mode/state change
- * might have occurred.
- * Note: Received lines may be terminated by CR, LF, or CR LF, which will be
- * removed before passing the line to the response handler.
- * Return value:
- *	number of processed bytes
- */
-static unsigned cmd_loop(unsigned numbytes, struct inbuf_t *inbuf)
-{
-	unsigned char *src = inbuf->data + inbuf->head;
-	struct cardstate *cs = inbuf->cs;
-	unsigned cbytes = cs->cbytes;
-	unsigned procbytes = 0;
-	unsigned char c;
-
-	while (procbytes < numbytes) {
-		c = *src++;
-		procbytes++;
-
-		switch (c) {
-		case '\n':
-			if (cbytes == 0 && cs->respdata[0] == '\r') {
-				/* collapse LF with preceding CR */
-				cs->respdata[0] = 0;
-				break;
-			}
-			/* fall through */
-		case '\r':
-			/* end of message line, pass to response handler */
-			if (cbytes >= MAX_RESP_SIZE) {
-				dev_warn(cs->dev, "response too large (%d)\n",
-					 cbytes);
-				cbytes = MAX_RESP_SIZE;
-			}
-			cs->cbytes = cbytes;
-			gigaset_dbg_buffer(DEBUG_TRANSCMD, "received response",
-					   cbytes, cs->respdata);
-			gigaset_handle_modem_response(cs);
-			cbytes = 0;
-
-			/* store EOL byte for CRLF collapsing */
-			cs->respdata[0] = c;
-
-			/* cs->dle may have changed */
-			if (cs->dle && !(inbuf->inputstate & INS_DLE_command))
-				inbuf->inputstate &= ~INS_command;
-
-			/* return for reevaluating state */
-			goto exit;
-
-		case DLE_FLAG:
-			if (inbuf->inputstate & INS_DLE_char) {
-				/* quoted DLE: clear quote flag */
-				inbuf->inputstate &= ~INS_DLE_char;
-			} else if (cs->dle ||
-				   (inbuf->inputstate & INS_DLE_command)) {
-				/* DLE escape, pass up for handling */
-				inbuf->inputstate |= INS_DLE_char;
-				goto exit;
-			}
-			/* quoted or not in DLE mode: treat as regular data */
-			/* fall through */
-		default:
-			/* append to line buffer if possible */
-			if (cbytes < MAX_RESP_SIZE)
-				cs->respdata[cbytes] = c;
-			cbytes++;
-		}
-	}
-exit:
-	cs->cbytes = cbytes;
-	return procbytes;
-}
-
-/* process a block of received bytes in lock mode
- * All received bytes are passed unmodified to the tty i/f.
- * Return value:
- *	number of processed bytes
- */
-static unsigned lock_loop(unsigned numbytes, struct inbuf_t *inbuf)
-{
-	unsigned char *src = inbuf->data + inbuf->head;
-
-	gigaset_dbg_buffer(DEBUG_LOCKCMD, "received response", numbytes, src);
-	gigaset_if_receive(inbuf->cs, src, numbytes);
-	return numbytes;
-}
-
-/* process a block of received bytes in HDLC data mode
- * (mstate != MS_LOCKED && !(inputstate & INS_command) && proto2 == L2_HDLC)
- * Collect HDLC frames, undoing byte stuffing and watching for DLE escapes.
- * When a frame is complete, check the FCS and pass valid frames to the LL.
- * If DLE is encountered, return immediately to let the caller handle it.
- * Return value:
- *	number of processed bytes
- */
-static unsigned hdlc_loop(unsigned numbytes, struct inbuf_t *inbuf)
-{
-	struct cardstate *cs = inbuf->cs;
-	struct bc_state *bcs = cs->bcs;
-	int inputstate = bcs->inputstate;
-	__u16 fcs = bcs->rx_fcs;
-	struct sk_buff *skb = bcs->rx_skb;
-	unsigned char *src = inbuf->data + inbuf->head;
-	unsigned procbytes = 0;
-	unsigned char c;
-
-	if (inputstate & INS_byte_stuff) {
-		if (!numbytes)
-			return 0;
-		inputstate &= ~INS_byte_stuff;
-		goto byte_stuff;
-	}
-
-	while (procbytes < numbytes) {
-		c = *src++;
-		procbytes++;
-		if (c == DLE_FLAG) {
-			if (inputstate & INS_DLE_char) {
-				/* quoted DLE: clear quote flag */
-				inputstate &= ~INS_DLE_char;
-			} else if (cs->dle || (inputstate & INS_DLE_command)) {
-				/* DLE escape, pass up for handling */
-				inputstate |= INS_DLE_char;
-				break;
-			}
-		}
-
-		if (c == PPP_ESCAPE) {
-			/* byte stuffing indicator: pull in next byte */
-			if (procbytes >= numbytes) {
-				/* end of buffer, save for later processing */
-				inputstate |= INS_byte_stuff;
-				break;
-			}
-byte_stuff:
-			c = *src++;
-			procbytes++;
-			if (c == DLE_FLAG) {
-				if (inputstate & INS_DLE_char) {
-					/* quoted DLE: clear quote flag */
-					inputstate &= ~INS_DLE_char;
-				} else if (cs->dle ||
-					   (inputstate & INS_DLE_command)) {
-					/* DLE escape, pass up for handling */
-					inputstate |=
-						INS_DLE_char | INS_byte_stuff;
-					break;
-				}
-			}
-			c ^= PPP_TRANS;
-#ifdef CONFIG_GIGASET_DEBUG
-			if (!muststuff(c))
-				gig_dbg(DEBUG_HDLC, "byte stuffed: 0x%02x", c);
-#endif
-		} else if (c == PPP_FLAG) {
-			/* end of frame: process content if any */
-			if (inputstate & INS_have_data) {
-				gig_dbg(DEBUG_HDLC,
-					"7e----------------------------");
-
-				/* check and pass received frame */
-				if (!skb) {
-					/* skipped frame */
-					gigaset_isdn_rcv_err(bcs);
-				} else if (skb->len < 2) {
-					/* frame too short for FCS */
-					dev_warn(cs->dev,
-						 "short frame (%d)\n",
-						 skb->len);
-					gigaset_isdn_rcv_err(bcs);
-					dev_kfree_skb_any(skb);
-				} else if (fcs != PPP_GOODFCS) {
-					/* frame check error */
-					dev_err(cs->dev,
-						"Checksum failed, %u bytes corrupted!\n",
-						skb->len);
-					gigaset_isdn_rcv_err(bcs);
-					dev_kfree_skb_any(skb);
-				} else {
-					/* good frame */
-					__skb_trim(skb, skb->len - 2);
-					gigaset_skb_rcvd(bcs, skb);
-				}
-
-				/* prepare reception of next frame */
-				inputstate &= ~INS_have_data;
-				skb = gigaset_new_rx_skb(bcs);
-			} else {
-				/* empty frame (7E 7E) */
-#ifdef CONFIG_GIGASET_DEBUG
-				++bcs->emptycount;
-#endif
-				if (!skb) {
-					/* skipped (?) */
-					gigaset_isdn_rcv_err(bcs);
-					skb = gigaset_new_rx_skb(bcs);
-				}
-			}
-
-			fcs = PPP_INITFCS;
-			continue;
-#ifdef CONFIG_GIGASET_DEBUG
-		} else if (muststuff(c)) {
-			/* Should not happen. Possible after ZDLE=1<CR><LF>. */
-			gig_dbg(DEBUG_HDLC, "not byte stuffed: 0x%02x", c);
-#endif
-		}
-
-		/* regular data byte, append to skb */
-#ifdef CONFIG_GIGASET_DEBUG
-		if (!(inputstate & INS_have_data)) {
-			gig_dbg(DEBUG_HDLC, "7e (%d x) ================",
-				bcs->emptycount);
-			bcs->emptycount = 0;
-		}
-#endif
-		inputstate |= INS_have_data;
-		if (skb) {
-			if (skb->len >= bcs->rx_bufsize) {
-				dev_warn(cs->dev, "received packet too long\n");
-				dev_kfree_skb_any(skb);
-				/* skip remainder of packet */
-				bcs->rx_skb = skb = NULL;
-			} else {
-				__skb_put_u8(skb, c);
-				fcs = crc_ccitt_byte(fcs, c);
-			}
-		}
-	}
-
-	bcs->inputstate = inputstate;
-	bcs->rx_fcs = fcs;
-	return procbytes;
-}
-
-/* process a block of received bytes in transparent data mode
- * (mstate != MS_LOCKED && !(inputstate & INS_command) && proto2 != L2_HDLC)
- * Invert bytes, undoing byte stuffing and watching for DLE escapes.
- * If DLE is encountered, return immediately to let the caller handle it.
- * Return value:
- *	number of processed bytes
- */
-static unsigned iraw_loop(unsigned numbytes, struct inbuf_t *inbuf)
-{
-	struct cardstate *cs = inbuf->cs;
-	struct bc_state *bcs = cs->bcs;
-	int inputstate = bcs->inputstate;
-	struct sk_buff *skb = bcs->rx_skb;
-	unsigned char *src = inbuf->data + inbuf->head;
-	unsigned procbytes = 0;
-	unsigned char c;
-
-	if (!skb) {
-		/* skip this block */
-		gigaset_new_rx_skb(bcs);
-		return numbytes;
-	}
-
-	while (procbytes < numbytes && skb->len < bcs->rx_bufsize) {
-		c = *src++;
-		procbytes++;
-
-		if (c == DLE_FLAG) {
-			if (inputstate & INS_DLE_char) {
-				/* quoted DLE: clear quote flag */
-				inputstate &= ~INS_DLE_char;
-			} else if (cs->dle || (inputstate & INS_DLE_command)) {
-				/* DLE escape, pass up for handling */
-				inputstate |= INS_DLE_char;
-				break;
-			}
-		}
-
-		/* regular data byte: append to current skb */
-		inputstate |= INS_have_data;
-		__skb_put_u8(skb, bitrev8(c));
-	}
-
-	/* pass data up */
-	if (inputstate & INS_have_data) {
-		gigaset_skb_rcvd(bcs, skb);
-		inputstate &= ~INS_have_data;
-		gigaset_new_rx_skb(bcs);
-	}
-
-	bcs->inputstate = inputstate;
-	return procbytes;
-}
-
-/* process DLE escapes
- * Called whenever a DLE sequence might be encountered in the input stream.
- * Either processes the entire DLE sequence or, if that isn't possible,
- * notes the fact that an initial DLE has been received in the INS_DLE_char
- * inputstate flag and resumes processing of the sequence on the next call.
- */
-static void handle_dle(struct inbuf_t *inbuf)
-{
-	struct cardstate *cs = inbuf->cs;
-
-	if (cs->mstate == MS_LOCKED)
-		return;		/* no DLE processing in lock mode */
-
-	if (!(inbuf->inputstate & INS_DLE_char)) {
-		/* no DLE pending */
-		if (inbuf->data[inbuf->head] == DLE_FLAG &&
-		    (cs->dle || inbuf->inputstate & INS_DLE_command)) {
-			/* start of DLE sequence */
-			inbuf->head++;
-			if (inbuf->head == inbuf->tail ||
-			    inbuf->head == RBUFSIZE) {
-				/* end of buffer, save for later processing */
-				inbuf->inputstate |= INS_DLE_char;
-				return;
-			}
-		} else {
-			/* regular data byte */
-			return;
-		}
-	}
-
-	/* consume pending DLE */
-	inbuf->inputstate &= ~INS_DLE_char;
-
-	switch (inbuf->data[inbuf->head]) {
-	case 'X':	/* begin of event message */
-		if (inbuf->inputstate & INS_command)
-			dev_notice(cs->dev,
-				   "received <DLE>X in command mode\n");
-		inbuf->inputstate |= INS_command | INS_DLE_command;
-		inbuf->head++;	/* byte consumed */
-		break;
-	case '.':	/* end of event message */
-		if (!(inbuf->inputstate & INS_DLE_command))
-			dev_notice(cs->dev,
-				   "received <DLE>. without <DLE>X\n");
-		inbuf->inputstate &= ~INS_DLE_command;
-		/* return to data mode if in DLE mode */
-		if (cs->dle)
-			inbuf->inputstate &= ~INS_command;
-		inbuf->head++;	/* byte consumed */
-		break;
-	case DLE_FLAG:	/* DLE in data stream */
-		/* mark as quoted */
-		inbuf->inputstate |= INS_DLE_char;
-		if (!(cs->dle || inbuf->inputstate & INS_DLE_command))
-			dev_notice(cs->dev,
-				   "received <DLE><DLE> not in DLE mode\n");
-		break;	/* quoted byte left in buffer */
-	default:
-		dev_notice(cs->dev, "received <DLE><%02x>\n",
-			   inbuf->data[inbuf->head]);
-		/* quoted byte left in buffer */
-	}
-}
-
-/**
- * gigaset_m10x_input() - process a block of data received from the device
- * @inbuf:	received data and device descriptor structure.
- *
- * Called by hardware module {ser,usb}_gigaset with a block of received
- * bytes. Separates the bytes received over the serial data channel into
- * user data and command replies (locked/unlocked) according to the
- * current state of the interface.
- */
-void gigaset_m10x_input(struct inbuf_t *inbuf)
-{
-	struct cardstate *cs = inbuf->cs;
-	unsigned numbytes, procbytes;
-
-	gig_dbg(DEBUG_INTR, "buffer state: %u -> %u", inbuf->head, inbuf->tail);
-
-	while (inbuf->head != inbuf->tail) {
-		/* check for DLE escape */
-		handle_dle(inbuf);
-
-		/* process a contiguous block of bytes */
-		numbytes = (inbuf->head > inbuf->tail ?
-			    RBUFSIZE : inbuf->tail) - inbuf->head;
-		gig_dbg(DEBUG_INTR, "processing %u bytes", numbytes);
-		/*
-		 * numbytes may be 0 if handle_dle() ate the last byte.
-		 * This does no harm, *_loop() will just return 0 immediately.
-		 */
-
-		if (cs->mstate == MS_LOCKED)
-			procbytes = lock_loop(numbytes, inbuf);
-		else if (inbuf->inputstate & INS_command)
-			procbytes = cmd_loop(numbytes, inbuf);
-		else if (cs->bcs->proto2 == L2_HDLC)
-			procbytes = hdlc_loop(numbytes, inbuf);
-		else
-			procbytes = iraw_loop(numbytes, inbuf);
-		inbuf->head += procbytes;
-
-		/* check for buffer wraparound */
-		if (inbuf->head >= RBUFSIZE)
-			inbuf->head = 0;
-
-		gig_dbg(DEBUG_INTR, "head set to %u", inbuf->head);
-	}
-}
-EXPORT_SYMBOL_GPL(gigaset_m10x_input);
-
-
-/* == data output ========================================================== */
-
-/*
- * Encode a data packet into an octet stuffed HDLC frame with FCS,
- * opening and closing flags, preserving headroom data.
- * parameters:
- *	skb		skb containing original packet (freed upon return)
- * Return value:
- *	pointer to newly allocated skb containing the result frame
- *	and the original link layer header, NULL on error
- */
-static struct sk_buff *HDLC_Encode(struct sk_buff *skb)
-{
-	struct sk_buff *hdlc_skb;
-	__u16 fcs;
-	unsigned char c;
-	unsigned char *cp;
-	int len;
-	unsigned int stuf_cnt;
-
-	stuf_cnt = 0;
-	fcs = PPP_INITFCS;
-	cp = skb->data;
-	len = skb->len;
-	while (len--) {
-		if (muststuff(*cp))
-			stuf_cnt++;
-		fcs = crc_ccitt_byte(fcs, *cp++);
-	}
-	fcs ^= 0xffff;			/* complement */
-
-	/* size of new buffer: original size + number of stuffing bytes
-	 * + 2 bytes FCS + 2 stuffing bytes for FCS (if needed) + 2 flag bytes
-	 * + room for link layer header
-	 */
-	hdlc_skb = dev_alloc_skb(skb->len + stuf_cnt + 6 + skb->mac_len);
-	if (!hdlc_skb) {
-		dev_kfree_skb_any(skb);
-		return NULL;
-	}
-
-	/* Copy link layer header into new skb */
-	skb_reset_mac_header(hdlc_skb);
-	skb_reserve(hdlc_skb, skb->mac_len);
-	memcpy(skb_mac_header(hdlc_skb), skb_mac_header(skb), skb->mac_len);
-	hdlc_skb->mac_len = skb->mac_len;
-
-	/* Add flag sequence in front of everything.. */
-	skb_put_u8(hdlc_skb, PPP_FLAG);
-
-	/* Perform byte stuffing while copying data. */
-	while (skb->len--) {
-		if (muststuff(*skb->data)) {
-			skb_put_u8(hdlc_skb, PPP_ESCAPE);
-			skb_put_u8(hdlc_skb, (*skb->data++) ^ PPP_TRANS);
-		} else
-			skb_put_u8(hdlc_skb, *skb->data++);
-	}
-
-	/* Finally add FCS (byte stuffed) and flag sequence */
-	c = (fcs & 0x00ff);	/* least significant byte first */
-	if (muststuff(c)) {
-		skb_put_u8(hdlc_skb, PPP_ESCAPE);
-		c ^= PPP_TRANS;
-	}
-	skb_put_u8(hdlc_skb, c);
-
-	c = ((fcs >> 8) & 0x00ff);
-	if (muststuff(c)) {
-		skb_put_u8(hdlc_skb, PPP_ESCAPE);
-		c ^= PPP_TRANS;
-	}
-	skb_put_u8(hdlc_skb, c);
-
-	skb_put_u8(hdlc_skb, PPP_FLAG);
-
-	dev_kfree_skb_any(skb);
-	return hdlc_skb;
-}
-
-/*
- * Encode a data packet into an octet stuffed raw bit inverted frame,
- * preserving headroom data.
- * parameters:
- *	skb		skb containing original packet (freed upon return)
- * Return value:
- *	pointer to newly allocated skb containing the result frame
- *	and the original link layer header, NULL on error
- */
-static struct sk_buff *iraw_encode(struct sk_buff *skb)
-{
-	struct sk_buff *iraw_skb;
-	unsigned char c;
-	unsigned char *cp;
-	int len;
-
-	/* size of new buffer (worst case = every byte must be stuffed):
-	 * 2 * original size + room for link layer header
-	 */
-	iraw_skb = dev_alloc_skb(2 * skb->len + skb->mac_len);
-	if (!iraw_skb) {
-		dev_kfree_skb_any(skb);
-		return NULL;
-	}
-
-	/* copy link layer header into new skb */
-	skb_reset_mac_header(iraw_skb);
-	skb_reserve(iraw_skb, skb->mac_len);
-	memcpy(skb_mac_header(iraw_skb), skb_mac_header(skb), skb->mac_len);
-	iraw_skb->mac_len = skb->mac_len;
-
-	/* copy and stuff data */
-	cp = skb->data;
-	len = skb->len;
-	while (len--) {
-		c = bitrev8(*cp++);
-		if (c == DLE_FLAG)
-			skb_put_u8(iraw_skb, c);
-		skb_put_u8(iraw_skb, c);
-	}
-	dev_kfree_skb_any(skb);
-	return iraw_skb;
-}
-
-/**
- * gigaset_m10x_send_skb() - queue an skb for sending
- * @bcs:	B channel descriptor structure.
- * @skb:	data to send.
- *
- * Called by LL to encode and queue an skb for sending, and start
- * transmission if necessary.
- * Once the payload data has been transmitted completely, gigaset_skb_sent()
- * will be called with the skb's link layer header preserved.
- *
- * Return value:
- *	number of bytes accepted for sending (skb->len) if ok,
- *	error code < 0 (eg. -ENOMEM) on error
- */
-int gigaset_m10x_send_skb(struct bc_state *bcs, struct sk_buff *skb)
-{
-	struct cardstate *cs = bcs->cs;
-	unsigned len = skb->len;
-	unsigned long flags;
-
-	if (bcs->proto2 == L2_HDLC)
-		skb = HDLC_Encode(skb);
-	else
-		skb = iraw_encode(skb);
-	if (!skb) {
-		dev_err(cs->dev,
-			"unable to allocate memory for encoding!\n");
-		return -ENOMEM;
-	}
-
-	skb_queue_tail(&bcs->squeue, skb);
-	spin_lock_irqsave(&cs->lock, flags);
-	if (cs->connected)
-		tasklet_schedule(&cs->write_tasklet);
-	spin_unlock_irqrestore(&cs->lock, flags);
-
-	return len;	/* ok so far */
-}
-EXPORT_SYMBOL_GPL(gigaset_m10x_send_skb);
diff --git a/drivers/staging/isdn/gigaset/bas-gigaset.c b/drivers/staging/isdn/gigaset/bas-gigaset.c
deleted file mode 100644
index c334525a5f63..000000000000
--- a/drivers/staging/isdn/gigaset/bas-gigaset.c
+++ /dev/null
@@ -1,2672 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * USB driver for Gigaset 307x base via direct USB connection.
- *
- * Copyright (c) 2001 by Hansjoerg Lipp <hjlipp@web.de>,
- *                       Tilman Schmidt <tilman@imap.cc>,
- *                       Stefan Eilers.
- *
- * =====================================================================
- * =====================================================================
- */
-
-#include "gigaset.h"
-#include <linux/usb.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-
-/* Version Information */
-#define DRIVER_AUTHOR "Tilman Schmidt <tilman@imap.cc>, Hansjoerg Lipp <hjlipp@web.de>, Stefan Eilers"
-#define DRIVER_DESC "USB Driver for Gigaset 307x"
-
-
-/* Module parameters */
-
-static int startmode = SM_ISDN;
-static int cidmode = 1;
-
-module_param(startmode, int, S_IRUGO);
-module_param(cidmode, int, S_IRUGO);
-MODULE_PARM_DESC(startmode, "start in isdn4linux mode");
-MODULE_PARM_DESC(cidmode, "Call-ID mode");
-
-#define GIGASET_MINORS     1
-#define GIGASET_MINOR      16
-#define GIGASET_MODULENAME "bas_gigaset"
-#define GIGASET_DEVNAME    "ttyGB"
-
-/* length limit according to Siemens 3070usb-protokoll.doc ch. 2.1 */
-#define IF_WRITEBUF 264
-
-/* interrupt pipe message size according to ibid. ch. 2.2 */
-#define IP_MSGSIZE 3
-
-/* Values for the Gigaset 307x */
-#define USB_GIGA_VENDOR_ID      0x0681
-#define USB_3070_PRODUCT_ID     0x0001
-#define USB_3075_PRODUCT_ID     0x0002
-#define USB_SX303_PRODUCT_ID    0x0021
-#define USB_SX353_PRODUCT_ID    0x0022
-
-/* table of devices that work with this driver */
-static const struct usb_device_id gigaset_table[] = {
-	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_3070_PRODUCT_ID) },
-	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_3075_PRODUCT_ID) },
-	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_SX303_PRODUCT_ID) },
-	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_SX353_PRODUCT_ID) },
-	{ } /* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, gigaset_table);
-
-/*======================= local function prototypes ==========================*/
-
-/* function called if a new device belonging to this driver is connected */
-static int gigaset_probe(struct usb_interface *interface,
-			 const struct usb_device_id *id);
-
-/* Function will be called if the device is unplugged */
-static void gigaset_disconnect(struct usb_interface *interface);
-
-/* functions called before/after suspend */
-static int gigaset_suspend(struct usb_interface *intf, pm_message_t message);
-static int gigaset_resume(struct usb_interface *intf);
-
-/* functions called before/after device reset */
-static int gigaset_pre_reset(struct usb_interface *intf);
-static int gigaset_post_reset(struct usb_interface *intf);
-
-static int atread_submit(struct cardstate *, int);
-static void stopurbs(struct bas_bc_state *);
-static int req_submit(struct bc_state *, int, int, int);
-static int atwrite_submit(struct cardstate *, unsigned char *, int);
-static int start_cbsend(struct cardstate *);
-
-/*============================================================================*/
-
-struct bas_cardstate {
-	struct usb_device	*udev;		/* USB device pointer */
-	struct cardstate	*cs;
-	struct usb_interface	*interface;	/* interface for this device */
-	unsigned char		minor;		/* starting minor number */
-
-	struct urb		*urb_ctrl;	/* control pipe default URB */
-	struct usb_ctrlrequest	dr_ctrl;
-	struct timer_list	timer_ctrl;	/* control request timeout */
-	int			retry_ctrl;
-
-	struct timer_list	timer_atrdy;	/* AT command ready timeout */
-	struct urb		*urb_cmd_out;	/* for sending AT commands */
-	struct usb_ctrlrequest	dr_cmd_out;
-	int			retry_cmd_out;
-
-	struct urb		*urb_cmd_in;	/* for receiving AT replies */
-	struct usb_ctrlrequest	dr_cmd_in;
-	struct timer_list	timer_cmd_in;	/* receive request timeout */
-	unsigned char		*rcvbuf;	/* AT reply receive buffer */
-
-	struct urb		*urb_int_in;	/* URB for interrupt pipe */
-	unsigned char		*int_in_buf;
-	struct work_struct	int_in_wq;	/* for usb_clear_halt() */
-	struct timer_list	timer_int_in;	/* int read retry delay */
-	int			retry_int_in;
-
-	spinlock_t		lock;		/* locks all following */
-	int			basstate;	/* bitmap (BS_*) */
-	int			pending;	/* uncompleted base request */
-	wait_queue_head_t	waitqueue;
-	int			rcvbuf_size;	/* size of AT receive buffer */
-						/* 0: no receive in progress */
-	int			retry_cmd_in;	/* receive req retry count */
-};
-
-/* status of direct USB connection to 307x base (bits in basstate) */
-#define BS_ATOPEN	0x001	/* AT channel open */
-#define BS_B1OPEN	0x002	/* B channel 1 open */
-#define BS_B2OPEN	0x004	/* B channel 2 open */
-#define BS_ATREADY	0x008	/* base ready for AT command */
-#define BS_INIT		0x010	/* base has signalled INIT_OK */
-#define BS_ATTIMER	0x020	/* waiting for HD_READY_SEND_ATDATA */
-#define BS_ATRDPEND	0x040	/* urb_cmd_in in use */
-#define BS_ATWRPEND	0x080	/* urb_cmd_out in use */
-#define BS_SUSPEND	0x100	/* USB port suspended */
-#define BS_RESETTING	0x200	/* waiting for HD_RESET_INTERRUPT_PIPE_ACK */
-
-
-static struct gigaset_driver *driver;
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver gigaset_usb_driver = {
-	.name =         GIGASET_MODULENAME,
-	.probe =        gigaset_probe,
-	.disconnect =   gigaset_disconnect,
-	.id_table =     gigaset_table,
-	.suspend =	gigaset_suspend,
-	.resume =	gigaset_resume,
-	.reset_resume =	gigaset_post_reset,
-	.pre_reset =	gigaset_pre_reset,
-	.post_reset =	gigaset_post_reset,
-	.disable_hub_initiated_lpm = 1,
-};
-
-/* get message text for usb_submit_urb return code
- */
-static char *get_usb_rcmsg(int rc)
-{
-	static char unkmsg[28];
-
-	switch (rc) {
-	case 0:
-		return "success";
-	case -ENOMEM:
-		return "out of memory";
-	case -ENODEV:
-		return "device not present";
-	case -ENOENT:
-		return "endpoint not present";
-	case -ENXIO:
-		return "URB type not supported";
-	case -EINVAL:
-		return "invalid argument";
-	case -EAGAIN:
-		return "start frame too early or too much scheduled";
-	case -EFBIG:
-		return "too many isoc frames requested";
-	case -EPIPE:
-		return "endpoint stalled";
-	case -EMSGSIZE:
-		return "invalid packet size";
-	case -ENOSPC:
-		return "would overcommit USB bandwidth";
-	case -ESHUTDOWN:
-		return "device shut down";
-	case -EPERM:
-		return "reject flag set";
-	case -EHOSTUNREACH:
-		return "device suspended";
-	default:
-		snprintf(unkmsg, sizeof(unkmsg), "unknown error %d", rc);
-		return unkmsg;
-	}
-}
-
-/* get message text for USB status code
- */
-static char *get_usb_statmsg(int status)
-{
-	static char unkmsg[28];
-
-	switch (status) {
-	case 0:
-		return "success";
-	case -ENOENT:
-		return "unlinked (sync)";
-	case -EINPROGRESS:
-		return "URB still pending";
-	case -EPROTO:
-		return "bitstuff error, timeout, or unknown USB error";
-	case -EILSEQ:
-		return "CRC mismatch, timeout, or unknown USB error";
-	case -ETIME:
-		return "USB response timeout";
-	case -EPIPE:
-		return "endpoint stalled";
-	case -ECOMM:
-		return "IN buffer overrun";
-	case -ENOSR:
-		return "OUT buffer underrun";
-	case -EOVERFLOW:
-		return "endpoint babble";
-	case -EREMOTEIO:
-		return "short packet";
-	case -ENODEV:
-		return "device removed";
-	case -EXDEV:
-		return "partial isoc transfer";
-	case -EINVAL:
-		return "ISO madness";
-	case -ECONNRESET:
-		return "unlinked (async)";
-	case -ESHUTDOWN:
-		return "device shut down";
-	default:
-		snprintf(unkmsg, sizeof(unkmsg), "unknown status %d", status);
-		return unkmsg;
-	}
-}
-
-/* usb_pipetype_str
- * retrieve string representation of USB pipe type
- */
-static inline char *usb_pipetype_str(int pipe)
-{
-	if (usb_pipeisoc(pipe))
-		return "Isoc";
-	if (usb_pipeint(pipe))
-		return "Int";
-	if (usb_pipecontrol(pipe))
-		return "Ctrl";
-	if (usb_pipebulk(pipe))
-		return "Bulk";
-	return "?";
-}
-
-/* dump_urb
- * write content of URB to syslog for debugging
- */
-static inline void dump_urb(enum debuglevel level, const char *tag,
-			    struct urb *urb)
-{
-#ifdef CONFIG_GIGASET_DEBUG
-	int i;
-	gig_dbg(level, "%s urb(0x%08lx)->{", tag, (unsigned long) urb);
-	if (urb) {
-		gig_dbg(level,
-			"  dev=0x%08lx, pipe=%s:EP%d/DV%d:%s, "
-			"hcpriv=0x%08lx, transfer_flags=0x%x,",
-			(unsigned long) urb->dev,
-			usb_pipetype_str(urb->pipe),
-			usb_pipeendpoint(urb->pipe), usb_pipedevice(urb->pipe),
-			usb_pipein(urb->pipe) ? "in" : "out",
-			(unsigned long) urb->hcpriv,
-			urb->transfer_flags);
-		gig_dbg(level,
-			"  transfer_buffer=0x%08lx[%d], actual_length=%d, "
-			"setup_packet=0x%08lx,",
-			(unsigned long) urb->transfer_buffer,
-			urb->transfer_buffer_length, urb->actual_length,
-			(unsigned long) urb->setup_packet);
-		gig_dbg(level,
-			"  start_frame=%d, number_of_packets=%d, interval=%d, "
-			"error_count=%d,",
-			urb->start_frame, urb->number_of_packets, urb->interval,
-			urb->error_count);
-		gig_dbg(level,
-			"  context=0x%08lx, complete=0x%08lx, "
-			"iso_frame_desc[]={",
-			(unsigned long) urb->context,
-			(unsigned long) urb->complete);
-		for (i = 0; i < urb->number_of_packets; i++) {
-			struct usb_iso_packet_descriptor *pifd
-				= &urb->iso_frame_desc[i];
-			gig_dbg(level,
-				"    {offset=%u, length=%u, actual_length=%u, "
-				"status=%u}",
-				pifd->offset, pifd->length, pifd->actual_length,
-				pifd->status);
-		}
-	}
-	gig_dbg(level, "}}");
-#endif
-}
-
-/* read/set modem control bits etc. (m10x only) */
-static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
-				  unsigned new_state)
-{
-	return -EINVAL;
-}
-
-static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
-{
-	return -EINVAL;
-}
-
-static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
-{
-	return -EINVAL;
-}
-
-/* set/clear bits in base connection state, return previous state
- */
-static inline int update_basstate(struct bas_cardstate *ucs,
-				  int set, int clear)
-{
-	unsigned long flags;
-	int state;
-
-	spin_lock_irqsave(&ucs->lock, flags);
-	state = ucs->basstate;
-	ucs->basstate = (state & ~clear) | set;
-	spin_unlock_irqrestore(&ucs->lock, flags);
-	return state;
-}
-
-/* error_hangup
- * hang up any existing connection because of an unrecoverable error
- * This function may be called from any context and takes care of scheduling
- * the necessary actions for execution outside of interrupt context.
- * cs->lock must not be held.
- * argument:
- *	B channel control structure
- */
-static inline void error_hangup(struct bc_state *bcs)
-{
-	struct cardstate *cs = bcs->cs;
-
-	gigaset_add_event(cs, &bcs->at_state, EV_HUP, NULL, 0, NULL);
-	gigaset_schedule_event(cs);
-}
-
-/* error_reset
- * reset Gigaset device because of an unrecoverable error
- * This function may be called from any context, and takes care of
- * scheduling the necessary actions for execution outside of interrupt context.
- * cs->hw.bas->lock must not be held.
- * argument:
- *	controller state structure
- */
-static inline void error_reset(struct cardstate *cs)
-{
-	/* reset interrupt pipe to recover (ignore errors) */
-	update_basstate(cs->hw.bas, BS_RESETTING, 0);
-	if (req_submit(cs->bcs, HD_RESET_INTERRUPT_PIPE, 0, BAS_TIMEOUT))
-		/* submission failed, escalate to USB port reset */
-		usb_queue_reset_device(cs->hw.bas->interface);
-}
-
-/* check_pending
- * check for completion of pending control request
- * parameter:
- *	ucs	hardware specific controller state structure
- */
-static void check_pending(struct bas_cardstate *ucs)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&ucs->lock, flags);
-	switch (ucs->pending) {
-	case 0:
-		break;
-	case HD_OPEN_ATCHANNEL:
-		if (ucs->basstate & BS_ATOPEN)
-			ucs->pending = 0;
-		break;
-	case HD_OPEN_B1CHANNEL:
-		if (ucs->basstate & BS_B1OPEN)
-			ucs->pending = 0;
-		break;
-	case HD_OPEN_B2CHANNEL:
-		if (ucs->basstate & BS_B2OPEN)
-			ucs->pending = 0;
-		break;
-	case HD_CLOSE_ATCHANNEL:
-		if (!(ucs->basstate & BS_ATOPEN))
-			ucs->pending = 0;
-		break;
-	case HD_CLOSE_B1CHANNEL:
-		if (!(ucs->basstate & BS_B1OPEN))
-			ucs->pending = 0;
-		break;
-	case HD_CLOSE_B2CHANNEL:
-		if (!(ucs->basstate & BS_B2OPEN))
-			ucs->pending = 0;
-		break;
-	case HD_DEVICE_INIT_ACK:		/* no reply expected */
-		ucs->pending = 0;
-		break;
-	case HD_RESET_INTERRUPT_PIPE:
-		if (!(ucs->basstate & BS_RESETTING))
-			ucs->pending = 0;
-		break;
-	/*
-	 * HD_READ_ATMESSAGE and HD_WRITE_ATMESSAGE are handled separately
-	 * and should never end up here
-	 */
-	default:
-		dev_warn(&ucs->interface->dev,
-			 "unknown pending request 0x%02x cleared\n",
-			 ucs->pending);
-		ucs->pending = 0;
-	}
-
-	if (!ucs->pending)
-		del_timer(&ucs->timer_ctrl);
-
-	spin_unlock_irqrestore(&ucs->lock, flags);
-}
-
-/* cmd_in_timeout
- * timeout routine for command input request
- * argument:
- *	controller state structure
- */
-static void cmd_in_timeout(struct timer_list *t)
-{
-	struct bas_cardstate *ucs = from_timer(ucs, t, timer_cmd_in);
-	struct cardstate *cs = ucs->cs;
-	int rc;
-
-	if (!ucs->rcvbuf_size) {
-		gig_dbg(DEBUG_USBREQ, "%s: no receive in progress", __func__);
-		return;
-	}
-
-	if (ucs->retry_cmd_in++ >= BAS_RETRY) {
-		dev_err(cs->dev,
-			"control read: timeout, giving up after %d tries\n",
-			ucs->retry_cmd_in);
-		kfree(ucs->rcvbuf);
-		ucs->rcvbuf = NULL;
-		ucs->rcvbuf_size = 0;
-		error_reset(cs);
-		return;
-	}
-
-	gig_dbg(DEBUG_USBREQ, "%s: timeout, retry %d",
-		__func__, ucs->retry_cmd_in);
-	rc = atread_submit(cs, BAS_TIMEOUT);
-	if (rc < 0) {
-		kfree(ucs->rcvbuf);
-		ucs->rcvbuf = NULL;
-		ucs->rcvbuf_size = 0;
-		if (rc != -ENODEV)
-			error_reset(cs);
-	}
-}
-
-/* read_ctrl_callback
- * USB completion handler for control pipe input
- * called by the USB subsystem in interrupt context
- * parameter:
- *	urb	USB request block
- *		urb->context = inbuf structure for controller state
- */
-static void read_ctrl_callback(struct urb *urb)
-{
-	struct inbuf_t *inbuf = urb->context;
-	struct cardstate *cs = inbuf->cs;
-	struct bas_cardstate *ucs = cs->hw.bas;
-	int status = urb->status;
-	unsigned numbytes;
-	int rc;
-
-	update_basstate(ucs, 0, BS_ATRDPEND);
-	wake_up(&ucs->waitqueue);
-	del_timer(&ucs->timer_cmd_in);
-
-	switch (status) {
-	case 0:				/* normal completion */
-		numbytes = urb->actual_length;
-		if (unlikely(numbytes != ucs->rcvbuf_size)) {
-			dev_warn(cs->dev,
-				 "control read: received %d chars, expected %d\n",
-				 numbytes, ucs->rcvbuf_size);
-			if (numbytes > ucs->rcvbuf_size)
-				numbytes = ucs->rcvbuf_size;
-		}
-
-		/* copy received bytes to inbuf, notify event layer */
-		if (gigaset_fill_inbuf(inbuf, ucs->rcvbuf, numbytes)) {
-			gig_dbg(DEBUG_INTR, "%s-->BH", __func__);
-			gigaset_schedule_event(cs);
-		}
-		break;
-
-	case -ENOENT:			/* cancelled */
-	case -ECONNRESET:		/* cancelled (async) */
-	case -EINPROGRESS:		/* pending */
-	case -ENODEV:			/* device removed */
-	case -ESHUTDOWN:		/* device shut down */
-		/* no further action necessary */
-		gig_dbg(DEBUG_USBREQ, "%s: %s",
-			__func__, get_usb_statmsg(status));
-		break;
-
-	default:			/* other errors: retry */
-		if (ucs->retry_cmd_in++ < BAS_RETRY) {
-			gig_dbg(DEBUG_USBREQ, "%s: %s, retry %d", __func__,
-				get_usb_statmsg(status), ucs->retry_cmd_in);
-			rc = atread_submit(cs, BAS_TIMEOUT);
-			if (rc >= 0)
-				/* successfully resubmitted, skip freeing */
-				return;
-			if (rc == -ENODEV)
-				/* disconnect, no further action necessary */
-				break;
-		}
-		dev_err(cs->dev, "control read: %s, giving up after %d tries\n",
-			get_usb_statmsg(status), ucs->retry_cmd_in);
-		error_reset(cs);
-	}
-
-	/* read finished, free buffer */
-	kfree(ucs->rcvbuf);
-	ucs->rcvbuf = NULL;
-	ucs->rcvbuf_size = 0;
-}
-
-/* atread_submit
- * submit an HD_READ_ATMESSAGE command URB and optionally start a timeout
- * parameters:
- *	cs	controller state structure
- *	timeout	timeout in 1/10 sec., 0: none
- * return value:
- *	0 on success
- *	-EBUSY if another request is pending
- *	any URB submission error code
- */
-static int atread_submit(struct cardstate *cs, int timeout)
-{
-	struct bas_cardstate *ucs = cs->hw.bas;
-	int basstate;
-	int ret;
-
-	gig_dbg(DEBUG_USBREQ, "-------> HD_READ_ATMESSAGE (%d)",
-		ucs->rcvbuf_size);
-
-	basstate = update_basstate(ucs, BS_ATRDPEND, 0);
-	if (basstate & BS_ATRDPEND) {
-		dev_err(cs->dev,
-			"could not submit HD_READ_ATMESSAGE: URB busy\n");
-		return -EBUSY;
-	}
-
-	if (basstate & BS_SUSPEND) {
-		dev_notice(cs->dev,
-			   "HD_READ_ATMESSAGE not submitted, "
-			   "suspend in progress\n");
-		update_basstate(ucs, 0, BS_ATRDPEND);
-		/* treat like disconnect */
-		return -ENODEV;
-	}
-
-	ucs->dr_cmd_in.bRequestType = IN_VENDOR_REQ;
-	ucs->dr_cmd_in.bRequest = HD_READ_ATMESSAGE;
-	ucs->dr_cmd_in.wValue = 0;
-	ucs->dr_cmd_in.wIndex = 0;
-	ucs->dr_cmd_in.wLength = cpu_to_le16(ucs->rcvbuf_size);
-	usb_fill_control_urb(ucs->urb_cmd_in, ucs->udev,
-			     usb_rcvctrlpipe(ucs->udev, 0),
-			     (unsigned char *) &ucs->dr_cmd_in,
-			     ucs->rcvbuf, ucs->rcvbuf_size,
-			     read_ctrl_callback, cs->inbuf);
-
-	ret = usb_submit_urb(ucs->urb_cmd_in, GFP_ATOMIC);
-	if (ret != 0) {
-		update_basstate(ucs, 0, BS_ATRDPEND);
-		dev_err(cs->dev, "could not submit HD_READ_ATMESSAGE: %s\n",
-			get_usb_rcmsg(ret));
-		return ret;
-	}
-
-	if (timeout > 0) {
-		gig_dbg(DEBUG_USBREQ, "setting timeout of %d/10 secs", timeout);
-		mod_timer(&ucs->timer_cmd_in, jiffies + timeout * HZ / 10);
-	}
-	return 0;
-}
-
-/* int_in_work
- * workqueue routine to clear halt on interrupt in endpoint
- */
-
-static void int_in_work(struct work_struct *work)
-{
-	struct bas_cardstate *ucs =
-		container_of(work, struct bas_cardstate, int_in_wq);
-	struct urb *urb = ucs->urb_int_in;
-	struct cardstate *cs = urb->context;
-	int rc;
-
-	/* clear halt condition */
-	rc = usb_clear_halt(ucs->udev, urb->pipe);
-	gig_dbg(DEBUG_USBREQ, "clear_halt: %s", get_usb_rcmsg(rc));
-	if (rc == 0)
-		/* success, resubmit interrupt read URB */
-		rc = usb_submit_urb(urb, GFP_ATOMIC);
-
-	switch (rc) {
-	case 0:		/* success */
-	case -ENODEV:	/* device gone */
-	case -EINVAL:	/* URB already resubmitted, or terminal badness */
-		break;
-	default:	/* failure: try to recover by resetting the device */
-		dev_err(cs->dev, "clear halt failed: %s\n", get_usb_rcmsg(rc));
-		rc = usb_lock_device_for_reset(ucs->udev, ucs->interface);
-		if (rc == 0) {
-			rc = usb_reset_device(ucs->udev);
-			usb_unlock_device(ucs->udev);
-		}
-	}
-	ucs->retry_int_in = 0;
-}
-
-/* int_in_resubmit
- * timer routine for interrupt read delayed resubmit
- * argument:
- *	controller state structure
- */
-static void int_in_resubmit(struct timer_list *t)
-{
-	struct bas_cardstate *ucs = from_timer(ucs, t, timer_int_in);
-	struct cardstate *cs = ucs->cs;
-	int rc;
-
-	if (ucs->retry_int_in++ >= BAS_RETRY) {
-		dev_err(cs->dev, "interrupt read: giving up after %d tries\n",
-			ucs->retry_int_in);
-		usb_queue_reset_device(ucs->interface);
-		return;
-	}
-
-	gig_dbg(DEBUG_USBREQ, "%s: retry %d", __func__, ucs->retry_int_in);
-	rc = usb_submit_urb(ucs->urb_int_in, GFP_ATOMIC);
-	if (rc != 0 && rc != -ENODEV) {
-		dev_err(cs->dev, "could not resubmit interrupt URB: %s\n",
-			get_usb_rcmsg(rc));
-		usb_queue_reset_device(ucs->interface);
-	}
-}
-
-/* read_int_callback
- * USB completion handler for interrupt pipe input
- * called by the USB subsystem in interrupt context
- * parameter:
- *	urb	USB request block
- *		urb->context = controller state structure
- */
-static void read_int_callback(struct urb *urb)
-{
-	struct cardstate *cs = urb->context;
-	struct bas_cardstate *ucs = cs->hw.bas;
-	struct bc_state *bcs;
-	int status = urb->status;
-	unsigned long flags;
-	int rc;
-	unsigned l;
-	int channel;
-
-	switch (status) {
-	case 0:			/* success */
-		ucs->retry_int_in = 0;
-		break;
-	case -EPIPE:			/* endpoint stalled */
-		schedule_work(&ucs->int_in_wq);
-		/* fall through */
-	case -ENOENT:			/* cancelled */
-	case -ECONNRESET:		/* cancelled (async) */
-	case -EINPROGRESS:		/* pending */
-	case -ENODEV:			/* device removed */
-	case -ESHUTDOWN:		/* device shut down */
-		/* no further action necessary */
-		gig_dbg(DEBUG_USBREQ, "%s: %s",
-			__func__, get_usb_statmsg(status));
-		return;
-	case -EPROTO:			/* protocol error or unplug */
-	case -EILSEQ:
-	case -ETIME:
-		/* resubmit after delay */
-		gig_dbg(DEBUG_USBREQ, "%s: %s",
-			__func__, get_usb_statmsg(status));
-		mod_timer(&ucs->timer_int_in, jiffies + HZ / 10);
-		return;
-	default:		/* other errors: just resubmit */
-		dev_warn(cs->dev, "interrupt read: %s\n",
-			 get_usb_statmsg(status));
-		goto resubmit;
-	}
-
-	/* drop incomplete packets even if the missing bytes wouldn't matter */
-	if (unlikely(urb->actual_length < IP_MSGSIZE)) {
-		dev_warn(cs->dev, "incomplete interrupt packet (%d bytes)\n",
-			 urb->actual_length);
-		goto resubmit;
-	}
-
-	l = (unsigned) ucs->int_in_buf[1] +
-		(((unsigned) ucs->int_in_buf[2]) << 8);
-
-	gig_dbg(DEBUG_USBREQ, "<-------%d: 0x%02x (%u [0x%02x 0x%02x])",
-		urb->actual_length, (int)ucs->int_in_buf[0], l,
-		(int)ucs->int_in_buf[1], (int)ucs->int_in_buf[2]);
-
-	channel = 0;
-
-	switch (ucs->int_in_buf[0]) {
-	case HD_DEVICE_INIT_OK:
-		update_basstate(ucs, BS_INIT, 0);
-		break;
-
-	case HD_READY_SEND_ATDATA:
-		del_timer(&ucs->timer_atrdy);
-		update_basstate(ucs, BS_ATREADY, BS_ATTIMER);
-		start_cbsend(cs);
-		break;
-
-	case HD_OPEN_B2CHANNEL_ACK:
-		++channel;
-		/* fall through */
-	case HD_OPEN_B1CHANNEL_ACK:
-		bcs = cs->bcs + channel;
-		update_basstate(ucs, BS_B1OPEN << channel, 0);
-		gigaset_bchannel_up(bcs);
-		break;
-
-	case HD_OPEN_ATCHANNEL_ACK:
-		update_basstate(ucs, BS_ATOPEN, 0);
-		start_cbsend(cs);
-		break;
-
-	case HD_CLOSE_B2CHANNEL_ACK:
-		++channel;
-		/* fall through */
-	case HD_CLOSE_B1CHANNEL_ACK:
-		bcs = cs->bcs + channel;
-		update_basstate(ucs, 0, BS_B1OPEN << channel);
-		stopurbs(bcs->hw.bas);
-		gigaset_bchannel_down(bcs);
-		break;
-
-	case HD_CLOSE_ATCHANNEL_ACK:
-		update_basstate(ucs, 0, BS_ATOPEN);
-		break;
-
-	case HD_B2_FLOW_CONTROL:
-		++channel;
-		/* fall through */
-	case HD_B1_FLOW_CONTROL:
-		bcs = cs->bcs + channel;
-		atomic_add((l - BAS_NORMFRAME) * BAS_CORRFRAMES,
-			   &bcs->hw.bas->corrbytes);
-		gig_dbg(DEBUG_ISO,
-			"Flow control (channel %d, sub %d): 0x%02x => %d",
-			channel, bcs->hw.bas->numsub, l,
-			atomic_read(&bcs->hw.bas->corrbytes));
-		break;
-
-	case HD_RECEIVEATDATA_ACK:	/* AT response ready to be received */
-		if (!l) {
-			dev_warn(cs->dev,
-				 "HD_RECEIVEATDATA_ACK with length 0 ignored\n");
-			break;
-		}
-		spin_lock_irqsave(&cs->lock, flags);
-		if (ucs->basstate & BS_ATRDPEND) {
-			spin_unlock_irqrestore(&cs->lock, flags);
-			dev_warn(cs->dev,
-				 "HD_RECEIVEATDATA_ACK(%d) during HD_READ_ATMESSAGE(%d) ignored\n",
-				 l, ucs->rcvbuf_size);
-			break;
-		}
-		if (ucs->rcvbuf_size) {
-			/* throw away previous buffer - we have no queue */
-			dev_err(cs->dev,
-				"receive AT data overrun, %d bytes lost\n",
-				ucs->rcvbuf_size);
-			kfree(ucs->rcvbuf);
-			ucs->rcvbuf_size = 0;
-		}
-		ucs->rcvbuf = kmalloc(l, GFP_ATOMIC);
-		if (ucs->rcvbuf == NULL) {
-			spin_unlock_irqrestore(&cs->lock, flags);
-			dev_err(cs->dev, "out of memory receiving AT data\n");
-			break;
-		}
-		ucs->rcvbuf_size = l;
-		ucs->retry_cmd_in = 0;
-		rc = atread_submit(cs, BAS_TIMEOUT);
-		if (rc < 0) {
-			kfree(ucs->rcvbuf);
-			ucs->rcvbuf = NULL;
-			ucs->rcvbuf_size = 0;
-		}
-		spin_unlock_irqrestore(&cs->lock, flags);
-		if (rc < 0 && rc != -ENODEV)
-			error_reset(cs);
-		break;
-
-	case HD_RESET_INTERRUPT_PIPE_ACK:
-		update_basstate(ucs, 0, BS_RESETTING);
-		dev_notice(cs->dev, "interrupt pipe reset\n");
-		break;
-
-	case HD_SUSPEND_END:
-		gig_dbg(DEBUG_USBREQ, "HD_SUSPEND_END");
-		break;
-
-	default:
-		dev_warn(cs->dev,
-			 "unknown Gigaset signal 0x%02x (%u) ignored\n",
-			 (int) ucs->int_in_buf[0], l);
-	}
-
-	check_pending(ucs);
-	wake_up(&ucs->waitqueue);
-
-resubmit:
-	rc = usb_submit_urb(urb, GFP_ATOMIC);
-	if (unlikely(rc != 0 && rc != -ENODEV)) {
-		dev_err(cs->dev, "could not resubmit interrupt URB: %s\n",
-			get_usb_rcmsg(rc));
-		error_reset(cs);
-	}
-}
-
-/* read_iso_callback
- * USB completion handler for B channel isochronous input
- * called by the USB subsystem in interrupt context
- * parameter:
- *	urb	USB request block of completed request
- *		urb->context = bc_state structure
- */
-static void read_iso_callback(struct urb *urb)
-{
-	struct bc_state *bcs;
-	struct bas_bc_state *ubc;
-	int status = urb->status;
-	unsigned long flags;
-	int i, rc;
-
-	/* status codes not worth bothering the tasklet with */
-	if (unlikely(status == -ENOENT ||
-		     status == -ECONNRESET ||
-		     status == -EINPROGRESS ||
-		     status == -ENODEV ||
-		     status == -ESHUTDOWN)) {
-		gig_dbg(DEBUG_ISO, "%s: %s",
-			__func__, get_usb_statmsg(status));
-		return;
-	}
-
-	bcs = urb->context;
-	ubc = bcs->hw.bas;
-
-	spin_lock_irqsave(&ubc->isoinlock, flags);
-	if (likely(ubc->isoindone == NULL)) {
-		/* pass URB to tasklet */
-		ubc->isoindone = urb;
-		ubc->isoinstatus = status;
-		tasklet_hi_schedule(&ubc->rcvd_tasklet);
-	} else {
-		/* tasklet still busy, drop data and resubmit URB */
-		gig_dbg(DEBUG_ISO, "%s: overrun", __func__);
-		ubc->loststatus = status;
-		for (i = 0; i < BAS_NUMFRAMES; i++) {
-			ubc->isoinlost += urb->iso_frame_desc[i].actual_length;
-			if (unlikely(urb->iso_frame_desc[i].status != 0 &&
-				     urb->iso_frame_desc[i].status != -EINPROGRESS))
-				ubc->loststatus = urb->iso_frame_desc[i].status;
-			urb->iso_frame_desc[i].status = 0;
-			urb->iso_frame_desc[i].actual_length = 0;
-		}
-		if (likely(ubc->running)) {
-			/* urb->dev is clobbered by USB subsystem */
-			urb->dev = bcs->cs->hw.bas->udev;
-			urb->transfer_flags = URB_ISO_ASAP;
-			urb->number_of_packets = BAS_NUMFRAMES;
-			rc = usb_submit_urb(urb, GFP_ATOMIC);
-			if (unlikely(rc != 0 && rc != -ENODEV)) {
-				dev_err(bcs->cs->dev,
-					"could not resubmit isoc read URB: %s\n",
-					get_usb_rcmsg(rc));
-				dump_urb(DEBUG_ISO, "isoc read", urb);
-				error_hangup(bcs);
-			}
-		}
-	}
-	spin_unlock_irqrestore(&ubc->isoinlock, flags);
-}
-
-/* write_iso_callback
- * USB completion handler for B channel isochronous output
- * called by the USB subsystem in interrupt context
- * parameter:
- *	urb	USB request block of completed request
- *		urb->context = isow_urbctx_t structure
- */
-static void write_iso_callback(struct urb *urb)
-{
-	struct isow_urbctx_t *ucx;
-	struct bas_bc_state *ubc;
-	int status = urb->status;
-	unsigned long flags;
-
-	/* status codes not worth bothering the tasklet with */
-	if (unlikely(status == -ENOENT ||
-		     status == -ECONNRESET ||
-		     status == -EINPROGRESS ||
-		     status == -ENODEV ||
-		     status == -ESHUTDOWN)) {
-		gig_dbg(DEBUG_ISO, "%s: %s",
-			__func__, get_usb_statmsg(status));
-		return;
-	}
-
-	/* pass URB context to tasklet */
-	ucx = urb->context;
-	ubc = ucx->bcs->hw.bas;
-	ucx->status = status;
-
-	spin_lock_irqsave(&ubc->isooutlock, flags);
-	ubc->isooutovfl = ubc->isooutdone;
-	ubc->isooutdone = ucx;
-	spin_unlock_irqrestore(&ubc->isooutlock, flags);
-	tasklet_hi_schedule(&ubc->sent_tasklet);
-}
-
-/* starturbs
- * prepare and submit USB request blocks for isochronous input and output
- * argument:
- *	B channel control structure
- * return value:
- *	0 on success
- *	< 0 on error (no URBs submitted)
- */
-static int starturbs(struct bc_state *bcs)
-{
-	struct usb_device *udev = bcs->cs->hw.bas->udev;
-	struct bas_bc_state *ubc = bcs->hw.bas;
-	struct urb *urb;
-	int j, k;
-	int rc;
-
-	/* initialize L2 reception */
-	if (bcs->proto2 == L2_HDLC)
-		bcs->inputstate |= INS_flag_hunt;
-
-	/* submit all isochronous input URBs */
-	ubc->running = 1;
-	for (k = 0; k < BAS_INURBS; k++) {
-		urb = ubc->isoinurbs[k];
-		if (!urb) {
-			rc = -EFAULT;
-			goto error;
-		}
-		usb_fill_int_urb(urb, udev,
-				 usb_rcvisocpipe(udev, 3 + 2 * bcs->channel),
-				 ubc->isoinbuf + k * BAS_INBUFSIZE,
-				 BAS_INBUFSIZE, read_iso_callback, bcs,
-				 BAS_FRAMETIME);
-
-		urb->transfer_flags = URB_ISO_ASAP;
-		urb->number_of_packets = BAS_NUMFRAMES;
-		for (j = 0; j < BAS_NUMFRAMES; j++) {
-			urb->iso_frame_desc[j].offset = j * BAS_MAXFRAME;
-			urb->iso_frame_desc[j].length = BAS_MAXFRAME;
-			urb->iso_frame_desc[j].status = 0;
-			urb->iso_frame_desc[j].actual_length = 0;
-		}
-
-		dump_urb(DEBUG_ISO, "Initial isoc read", urb);
-		rc = usb_submit_urb(urb, GFP_ATOMIC);
-		if (rc != 0)
-			goto error;
-	}
-
-	/* initialize L2 transmission */
-	gigaset_isowbuf_init(ubc->isooutbuf, PPP_FLAG);
-
-	/* set up isochronous output URBs for flag idling */
-	for (k = 0; k < BAS_OUTURBS; ++k) {
-		urb = ubc->isoouturbs[k].urb;
-		if (!urb) {
-			rc = -EFAULT;
-			goto error;
-		}
-		usb_fill_int_urb(urb, udev,
-				 usb_sndisocpipe(udev, 4 + 2 * bcs->channel),
-				 ubc->isooutbuf->data,
-				 sizeof(ubc->isooutbuf->data),
-				 write_iso_callback, &ubc->isoouturbs[k],
-				 BAS_FRAMETIME);
-
-		urb->transfer_flags = URB_ISO_ASAP;
-		urb->number_of_packets = BAS_NUMFRAMES;
-		for (j = 0; j < BAS_NUMFRAMES; ++j) {
-			urb->iso_frame_desc[j].offset = BAS_OUTBUFSIZE;
-			urb->iso_frame_desc[j].length = BAS_NORMFRAME;
-			urb->iso_frame_desc[j].status = 0;
-			urb->iso_frame_desc[j].actual_length = 0;
-		}
-		ubc->isoouturbs[k].limit = -1;
-	}
-
-	/* keep one URB free, submit the others */
-	for (k = 0; k < BAS_OUTURBS - 1; ++k) {
-		dump_urb(DEBUG_ISO, "Initial isoc write", urb);
-		rc = usb_submit_urb(ubc->isoouturbs[k].urb, GFP_ATOMIC);
-		if (rc != 0)
-			goto error;
-	}
-	dump_urb(DEBUG_ISO, "Initial isoc write (free)", urb);
-	ubc->isooutfree = &ubc->isoouturbs[BAS_OUTURBS - 1];
-	ubc->isooutdone = ubc->isooutovfl = NULL;
-	return 0;
-error:
-	stopurbs(ubc);
-	return rc;
-}
-
-/* stopurbs
- * cancel the USB request blocks for isochronous input and output
- * errors are silently ignored
- * argument:
- *	B channel control structure
- */
-static void stopurbs(struct bas_bc_state *ubc)
-{
-	int k, rc;
-
-	ubc->running = 0;
-
-	for (k = 0; k < BAS_INURBS; ++k) {
-		rc = usb_unlink_urb(ubc->isoinurbs[k]);
-		gig_dbg(DEBUG_ISO,
-			"%s: isoc input URB %d unlinked, result = %s",
-			__func__, k, get_usb_rcmsg(rc));
-	}
-
-	for (k = 0; k < BAS_OUTURBS; ++k) {
-		rc = usb_unlink_urb(ubc->isoouturbs[k].urb);
-		gig_dbg(DEBUG_ISO,
-			"%s: isoc output URB %d unlinked, result = %s",
-			__func__, k, get_usb_rcmsg(rc));
-	}
-}
-
-/* Isochronous Write - Bottom Half */
-/* =============================== */
-
-/* submit_iso_write_urb
- * fill and submit the next isochronous write URB
- * parameters:
- *	ucx	context structure containing URB
- * return value:
- *	number of frames submitted in URB
- *	0 if URB not submitted because no data available (isooutbuf busy)
- *	error code < 0 on error
- */
-static int submit_iso_write_urb(struct isow_urbctx_t *ucx)
-{
-	struct urb *urb = ucx->urb;
-	struct bas_bc_state *ubc = ucx->bcs->hw.bas;
-	struct usb_iso_packet_descriptor *ifd;
-	int corrbytes, nframe, rc;
-
-	/* urb->dev is clobbered by USB subsystem */
-	urb->dev = ucx->bcs->cs->hw.bas->udev;
-	urb->transfer_flags = URB_ISO_ASAP;
-	urb->transfer_buffer = ubc->isooutbuf->data;
-	urb->transfer_buffer_length = sizeof(ubc->isooutbuf->data);
-
-	for (nframe = 0; nframe < BAS_NUMFRAMES; nframe++) {
-		ifd = &urb->iso_frame_desc[nframe];
-
-		/* compute frame length according to flow control */
-		ifd->length = BAS_NORMFRAME;
-		corrbytes = atomic_read(&ubc->corrbytes);
-		if (corrbytes != 0) {
-			gig_dbg(DEBUG_ISO, "%s: corrbytes=%d",
-				__func__, corrbytes);
-			if (corrbytes > BAS_HIGHFRAME - BAS_NORMFRAME)
-				corrbytes = BAS_HIGHFRAME - BAS_NORMFRAME;
-			else if (corrbytes < BAS_LOWFRAME - BAS_NORMFRAME)
-				corrbytes = BAS_LOWFRAME - BAS_NORMFRAME;
-			ifd->length += corrbytes;
-			atomic_add(-corrbytes, &ubc->corrbytes);
-		}
-
-		/* retrieve block of data to send */
-		rc = gigaset_isowbuf_getbytes(ubc->isooutbuf, ifd->length);
-		if (rc < 0) {
-			if (rc == -EBUSY) {
-				gig_dbg(DEBUG_ISO,
-					"%s: buffer busy at frame %d",
-					__func__, nframe);
-				/* tasklet will be restarted from
-				   gigaset_isoc_send_skb() */
-			} else {
-				dev_err(ucx->bcs->cs->dev,
-					"%s: buffer error %d at frame %d\n",
-					__func__, rc, nframe);
-				return rc;
-			}
-			break;
-		}
-		ifd->offset = rc;
-		ucx->limit = ubc->isooutbuf->nextread;
-		ifd->status = 0;
-		ifd->actual_length = 0;
-	}
-	if (unlikely(nframe == 0))
-		return 0;	/* no data to send */
-	urb->number_of_packets = nframe;
-
-	rc = usb_submit_urb(urb, GFP_ATOMIC);
-	if (unlikely(rc)) {
-		if (rc == -ENODEV)
-			/* device removed - give up silently */
-			gig_dbg(DEBUG_ISO, "%s: disconnected", __func__);
-		else
-			dev_err(ucx->bcs->cs->dev,
-				"could not submit isoc write URB: %s\n",
-				get_usb_rcmsg(rc));
-		return rc;
-	}
-	++ubc->numsub;
-	return nframe;
-}
-
-/* write_iso_tasklet
- * tasklet scheduled when an isochronous output URB from the Gigaset device
- * has completed
- * parameter:
- *	data	B channel state structure
- */
-static void write_iso_tasklet(unsigned long data)
-{
-	struct bc_state *bcs = (struct bc_state *) data;
-	struct bas_bc_state *ubc = bcs->hw.bas;
-	struct cardstate *cs = bcs->cs;
-	struct isow_urbctx_t *done, *next, *ovfl;
-	struct urb *urb;
-	int status;
-	struct usb_iso_packet_descriptor *ifd;
-	unsigned long flags;
-	int i;
-	struct sk_buff *skb;
-	int len;
-	int rc;
-
-	/* loop while completed URBs arrive in time */
-	for (;;) {
-		if (unlikely(!(ubc->running))) {
-			gig_dbg(DEBUG_ISO, "%s: not running", __func__);
-			return;
-		}
-
-		/* retrieve completed URBs */
-		spin_lock_irqsave(&ubc->isooutlock, flags);
-		done = ubc->isooutdone;
-		ubc->isooutdone = NULL;
-		ovfl = ubc->isooutovfl;
-		ubc->isooutovfl = NULL;
-		spin_unlock_irqrestore(&ubc->isooutlock, flags);
-		if (ovfl) {
-			dev_err(cs->dev, "isoc write underrun\n");
-			error_hangup(bcs);
-			break;
-		}
-		if (!done)
-			break;
-
-		/* submit free URB if available */
-		spin_lock_irqsave(&ubc->isooutlock, flags);
-		next = ubc->isooutfree;
-		ubc->isooutfree = NULL;
-		spin_unlock_irqrestore(&ubc->isooutlock, flags);
-		if (next) {
-			rc = submit_iso_write_urb(next);
-			if (unlikely(rc <= 0 && rc != -ENODEV)) {
-				/* could not submit URB, put it back */
-				spin_lock_irqsave(&ubc->isooutlock, flags);
-				if (ubc->isooutfree == NULL) {
-					ubc->isooutfree = next;
-					next = NULL;
-				}
-				spin_unlock_irqrestore(&ubc->isooutlock, flags);
-				if (next) {
-					/* couldn't put it back */
-					dev_err(cs->dev,
-						"losing isoc write URB\n");
-					error_hangup(bcs);
-				}
-			}
-		}
-
-		/* process completed URB */
-		urb = done->urb;
-		status = done->status;
-		switch (status) {
-		case -EXDEV:			/* partial completion */
-			gig_dbg(DEBUG_ISO, "%s: URB partially completed",
-				__func__);
-			/* fall through - what's the difference anyway? */
-		case 0:				/* normal completion */
-			/* inspect individual frames
-			 * assumptions (for lack of documentation):
-			 * - actual_length bytes of first frame in error are
-			 *   successfully sent
-			 * - all following frames are not sent at all
-			 */
-			for (i = 0; i < BAS_NUMFRAMES; i++) {
-				ifd = &urb->iso_frame_desc[i];
-				if (ifd->status ||
-				    ifd->actual_length != ifd->length) {
-					dev_warn(cs->dev,
-						 "isoc write: frame %d[%d/%d]: %s\n",
-						 i, ifd->actual_length,
-						 ifd->length,
-						 get_usb_statmsg(ifd->status));
-					break;
-				}
-			}
-			break;
-		case -EPIPE:			/* stall - probably underrun */
-			dev_err(cs->dev, "isoc write: stalled\n");
-			error_hangup(bcs);
-			break;
-		default:			/* other errors */
-			dev_warn(cs->dev, "isoc write: %s\n",
-				 get_usb_statmsg(status));
-		}
-
-		/* mark the write buffer area covered by this URB as free */
-		if (done->limit >= 0)
-			ubc->isooutbuf->read = done->limit;
-
-		/* mark URB as free */
-		spin_lock_irqsave(&ubc->isooutlock, flags);
-		next = ubc->isooutfree;
-		ubc->isooutfree = done;
-		spin_unlock_irqrestore(&ubc->isooutlock, flags);
-		if (next) {
-			/* only one URB still active - resubmit one */
-			rc = submit_iso_write_urb(next);
-			if (unlikely(rc <= 0 && rc != -ENODEV)) {
-				/* couldn't submit */
-				error_hangup(bcs);
-			}
-		}
-	}
-
-	/* process queued SKBs */
-	while ((skb = skb_dequeue(&bcs->squeue))) {
-		/* copy to output buffer, doing L2 encapsulation */
-		len = skb->len;
-		if (gigaset_isoc_buildframe(bcs, skb->data, len) == -EAGAIN) {
-			/* insufficient buffer space, push back onto queue */
-			skb_queue_head(&bcs->squeue, skb);
-			gig_dbg(DEBUG_ISO, "%s: skb requeued, qlen=%d",
-				__func__, skb_queue_len(&bcs->squeue));
-			break;
-		}
-		skb_pull(skb, len);
-		gigaset_skb_sent(bcs, skb);
-		dev_kfree_skb_any(skb);
-	}
-}
-
-/* Isochronous Read - Bottom Half */
-/* ============================== */
-
-/* read_iso_tasklet
- * tasklet scheduled when an isochronous input URB from the Gigaset device
- * has completed
- * parameter:
- *	data	B channel state structure
- */
-static void read_iso_tasklet(unsigned long data)
-{
-	struct bc_state *bcs = (struct bc_state *) data;
-	struct bas_bc_state *ubc = bcs->hw.bas;
-	struct cardstate *cs = bcs->cs;
-	struct urb *urb;
-	int status;
-	struct usb_iso_packet_descriptor *ifd;
-	char *rcvbuf;
-	unsigned long flags;
-	int totleft, numbytes, offset, frame, rc;
-
-	/* loop while more completed URBs arrive in the meantime */
-	for (;;) {
-		/* retrieve URB */
-		spin_lock_irqsave(&ubc->isoinlock, flags);
-		urb = ubc->isoindone;
-		if (!urb) {
-			spin_unlock_irqrestore(&ubc->isoinlock, flags);
-			return;
-		}
-		status = ubc->isoinstatus;
-		ubc->isoindone = NULL;
-		if (unlikely(ubc->loststatus != -EINPROGRESS)) {
-			dev_warn(cs->dev,
-				 "isoc read overrun, URB dropped (status: %s, %d bytes)\n",
-				 get_usb_statmsg(ubc->loststatus),
-				 ubc->isoinlost);
-			ubc->loststatus = -EINPROGRESS;
-		}
-		spin_unlock_irqrestore(&ubc->isoinlock, flags);
-
-		if (unlikely(!(ubc->running))) {
-			gig_dbg(DEBUG_ISO,
-				"%s: channel not running, "
-				"dropped URB with status: %s",
-				__func__, get_usb_statmsg(status));
-			return;
-		}
-
-		switch (status) {
-		case 0:				/* normal completion */
-			break;
-		case -EXDEV:			/* inspect individual frames
-						   (we do that anyway) */
-			gig_dbg(DEBUG_ISO, "%s: URB partially completed",
-				__func__);
-			break;
-		case -ENOENT:
-		case -ECONNRESET:
-		case -EINPROGRESS:
-			gig_dbg(DEBUG_ISO, "%s: %s",
-				__func__, get_usb_statmsg(status));
-			continue;		/* -> skip */
-		case -EPIPE:
-			dev_err(cs->dev, "isoc read: stalled\n");
-			error_hangup(bcs);
-			continue;		/* -> skip */
-		default:			/* other error */
-			dev_warn(cs->dev, "isoc read: %s\n",
-				 get_usb_statmsg(status));
-			goto error;
-		}
-
-		rcvbuf = urb->transfer_buffer;
-		totleft = urb->actual_length;
-		for (frame = 0; totleft > 0 && frame < BAS_NUMFRAMES; frame++) {
-			ifd = &urb->iso_frame_desc[frame];
-			numbytes = ifd->actual_length;
-			switch (ifd->status) {
-			case 0:			/* success */
-				break;
-			case -EPROTO:		/* protocol error or unplug */
-			case -EILSEQ:
-			case -ETIME:
-				/* probably just disconnected, ignore */
-				gig_dbg(DEBUG_ISO,
-					"isoc read: frame %d[%d]: %s\n",
-					frame, numbytes,
-					get_usb_statmsg(ifd->status));
-				break;
-			default:		/* other error */
-				/* report, assume transferred bytes are ok */
-				dev_warn(cs->dev,
-					 "isoc read: frame %d[%d]: %s\n",
-					 frame, numbytes,
-					 get_usb_statmsg(ifd->status));
-			}
-			if (unlikely(numbytes > BAS_MAXFRAME))
-				dev_warn(cs->dev,
-					 "isoc read: frame %d[%d]: %s\n",
-					 frame, numbytes,
-					 "exceeds max frame size");
-			if (unlikely(numbytes > totleft)) {
-				dev_warn(cs->dev,
-					 "isoc read: frame %d[%d]: %s\n",
-					 frame, numbytes,
-					 "exceeds total transfer length");
-				numbytes = totleft;
-			}
-			offset = ifd->offset;
-			if (unlikely(offset + numbytes > BAS_INBUFSIZE)) {
-				dev_warn(cs->dev,
-					 "isoc read: frame %d[%d]: %s\n",
-					 frame, numbytes,
-					 "exceeds end of buffer");
-				numbytes = BAS_INBUFSIZE - offset;
-			}
-			gigaset_isoc_receive(rcvbuf + offset, numbytes, bcs);
-			totleft -= numbytes;
-		}
-		if (unlikely(totleft > 0))
-			dev_warn(cs->dev, "isoc read: %d data bytes missing\n",
-				 totleft);
-
-error:
-		/* URB processed, resubmit */
-		for (frame = 0; frame < BAS_NUMFRAMES; frame++) {
-			urb->iso_frame_desc[frame].status = 0;
-			urb->iso_frame_desc[frame].actual_length = 0;
-		}
-		/* urb->dev is clobbered by USB subsystem */
-		urb->dev = bcs->cs->hw.bas->udev;
-		urb->transfer_flags = URB_ISO_ASAP;
-		urb->number_of_packets = BAS_NUMFRAMES;
-		rc = usb_submit_urb(urb, GFP_ATOMIC);
-		if (unlikely(rc != 0 && rc != -ENODEV)) {
-			dev_err(cs->dev,
-				"could not resubmit isoc read URB: %s\n",
-				get_usb_rcmsg(rc));
-			dump_urb(DEBUG_ISO, "resubmit isoc read", urb);
-			error_hangup(bcs);
-		}
-	}
-}
-
-/* Channel Operations */
-/* ================== */
-
-/* req_timeout
- * timeout routine for control output request
- * argument:
- *	controller state structure
- */
-static void req_timeout(struct timer_list *t)
-{
-	struct bas_cardstate *ucs = from_timer(ucs, t, timer_ctrl);
-	struct cardstate *cs = ucs->cs;
-	int pending;
-	unsigned long flags;
-
-	check_pending(ucs);
-
-	spin_lock_irqsave(&ucs->lock, flags);
-	pending = ucs->pending;
-	ucs->pending = 0;
-	spin_unlock_irqrestore(&ucs->lock, flags);
-
-	switch (pending) {
-	case 0:					/* no pending request */
-		gig_dbg(DEBUG_USBREQ, "%s: no request pending", __func__);
-		break;
-
-	case HD_OPEN_ATCHANNEL:
-		dev_err(cs->dev, "timeout opening AT channel\n");
-		error_reset(cs);
-		break;
-
-	case HD_OPEN_B1CHANNEL:
-		dev_err(cs->dev, "timeout opening channel 1\n");
-		error_hangup(&cs->bcs[0]);
-		break;
-
-	case HD_OPEN_B2CHANNEL:
-		dev_err(cs->dev, "timeout opening channel 2\n");
-		error_hangup(&cs->bcs[1]);
-		break;
-
-	case HD_CLOSE_ATCHANNEL:
-		dev_err(cs->dev, "timeout closing AT channel\n");
-		error_reset(cs);
-		break;
-
-	case HD_CLOSE_B1CHANNEL:
-		dev_err(cs->dev, "timeout closing channel 1\n");
-		error_reset(cs);
-		break;
-
-	case HD_CLOSE_B2CHANNEL:
-		dev_err(cs->dev, "timeout closing channel 2\n");
-		error_reset(cs);
-		break;
-
-	case HD_RESET_INTERRUPT_PIPE:
-		/* error recovery escalation */
-		dev_err(cs->dev,
-			"reset interrupt pipe timeout, attempting USB reset\n");
-		usb_queue_reset_device(ucs->interface);
-		break;
-
-	default:
-		dev_warn(cs->dev, "request 0x%02x timed out, clearing\n",
-			 pending);
-	}
-
-	wake_up(&ucs->waitqueue);
-}
-
-/* write_ctrl_callback
- * USB completion handler for control pipe output
- * called by the USB subsystem in interrupt context
- * parameter:
- *	urb	USB request block of completed request
- *		urb->context = hardware specific controller state structure
- */
-static void write_ctrl_callback(struct urb *urb)
-{
-	struct bas_cardstate *ucs = urb->context;
-	int status = urb->status;
-	int rc;
-	unsigned long flags;
-
-	/* check status */
-	switch (status) {
-	case 0:					/* normal completion */
-		spin_lock_irqsave(&ucs->lock, flags);
-		switch (ucs->pending) {
-		case HD_DEVICE_INIT_ACK:	/* no reply expected */
-			del_timer(&ucs->timer_ctrl);
-			ucs->pending = 0;
-			break;
-		}
-		spin_unlock_irqrestore(&ucs->lock, flags);
-		return;
-
-	case -ENOENT:			/* cancelled */
-	case -ECONNRESET:		/* cancelled (async) */
-	case -EINPROGRESS:		/* pending */
-	case -ENODEV:			/* device removed */
-	case -ESHUTDOWN:		/* device shut down */
-		/* ignore silently */
-		gig_dbg(DEBUG_USBREQ, "%s: %s",
-			__func__, get_usb_statmsg(status));
-		break;
-
-	default:				/* any failure */
-		/* don't retry if suspend requested */
-		if (++ucs->retry_ctrl > BAS_RETRY ||
-		    (ucs->basstate & BS_SUSPEND)) {
-			dev_err(&ucs->interface->dev,
-				"control request 0x%02x failed: %s\n",
-				ucs->dr_ctrl.bRequest,
-				get_usb_statmsg(status));
-			break;		/* give up */
-		}
-		dev_notice(&ucs->interface->dev,
-			   "control request 0x%02x: %s, retry %d\n",
-			   ucs->dr_ctrl.bRequest, get_usb_statmsg(status),
-			   ucs->retry_ctrl);
-		/* urb->dev is clobbered by USB subsystem */
-		urb->dev = ucs->udev;
-		rc = usb_submit_urb(urb, GFP_ATOMIC);
-		if (unlikely(rc)) {
-			dev_err(&ucs->interface->dev,
-				"could not resubmit request 0x%02x: %s\n",
-				ucs->dr_ctrl.bRequest, get_usb_rcmsg(rc));
-			break;
-		}
-		/* resubmitted */
-		return;
-	}
-
-	/* failed, clear pending request */
-	spin_lock_irqsave(&ucs->lock, flags);
-	del_timer(&ucs->timer_ctrl);
-	ucs->pending = 0;
-	spin_unlock_irqrestore(&ucs->lock, flags);
-	wake_up(&ucs->waitqueue);
-}
-
-/* req_submit
- * submit a control output request without message buffer to the Gigaset base
- * and optionally start a timeout
- * parameters:
- *	bcs	B channel control structure
- *	req	control request code (HD_*)
- *	val	control request parameter value (set to 0 if unused)
- *	timeout	timeout in seconds (0: no timeout)
- * return value:
- *	0 on success
- *	-EBUSY if another request is pending
- *	any URB submission error code
- */
-static int req_submit(struct bc_state *bcs, int req, int val, int timeout)
-{
-	struct bas_cardstate *ucs = bcs->cs->hw.bas;
-	int ret;
-	unsigned long flags;
-
-	gig_dbg(DEBUG_USBREQ, "-------> 0x%02x (%d)", req, val);
-
-	spin_lock_irqsave(&ucs->lock, flags);
-	if (ucs->pending) {
-		spin_unlock_irqrestore(&ucs->lock, flags);
-		dev_err(bcs->cs->dev,
-			"submission of request 0x%02x failed: "
-			"request 0x%02x still pending\n",
-			req, ucs->pending);
-		return -EBUSY;
-	}
-
-	ucs->dr_ctrl.bRequestType = OUT_VENDOR_REQ;
-	ucs->dr_ctrl.bRequest = req;
-	ucs->dr_ctrl.wValue = cpu_to_le16(val);
-	ucs->dr_ctrl.wIndex = 0;
-	ucs->dr_ctrl.wLength = 0;
-	usb_fill_control_urb(ucs->urb_ctrl, ucs->udev,
-			     usb_sndctrlpipe(ucs->udev, 0),
-			     (unsigned char *) &ucs->dr_ctrl, NULL, 0,
-			     write_ctrl_callback, ucs);
-	ucs->retry_ctrl = 0;
-	ret = usb_submit_urb(ucs->urb_ctrl, GFP_ATOMIC);
-	if (unlikely(ret)) {
-		dev_err(bcs->cs->dev, "could not submit request 0x%02x: %s\n",
-			req, get_usb_rcmsg(ret));
-		spin_unlock_irqrestore(&ucs->lock, flags);
-		return ret;
-	}
-	ucs->pending = req;
-
-	if (timeout > 0) {
-		gig_dbg(DEBUG_USBREQ, "setting timeout of %d/10 secs", timeout);
-		mod_timer(&ucs->timer_ctrl, jiffies + timeout * HZ / 10);
-	}
-
-	spin_unlock_irqrestore(&ucs->lock, flags);
-	return 0;
-}
-
-/* gigaset_init_bchannel
- * called by common.c to connect a B channel
- * initialize isochronous I/O and tell the Gigaset base to open the channel
- * argument:
- *	B channel control structure
- * return value:
- *	0 on success, error code < 0 on error
- */
-static int gigaset_init_bchannel(struct bc_state *bcs)
-{
-	struct cardstate *cs = bcs->cs;
-	int req, ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cs->lock, flags);
-	if (unlikely(!cs->connected)) {
-		gig_dbg(DEBUG_USBREQ, "%s: not connected", __func__);
-		spin_unlock_irqrestore(&cs->lock, flags);
-		return -ENODEV;
-	}
-
-	if (cs->hw.bas->basstate & BS_SUSPEND) {
-		dev_notice(cs->dev,
-			   "not starting isoc I/O, suspend in progress\n");
-		spin_unlock_irqrestore(&cs->lock, flags);
-		return -EHOSTUNREACH;
-	}
-
-	ret = starturbs(bcs);
-	if (ret < 0) {
-		spin_unlock_irqrestore(&cs->lock, flags);
-		dev_err(cs->dev,
-			"could not start isoc I/O for channel B%d: %s\n",
-			bcs->channel + 1,
-			ret == -EFAULT ? "null URB" : get_usb_rcmsg(ret));
-		if (ret != -ENODEV)
-			error_hangup(bcs);
-		return ret;
-	}
-
-	req = bcs->channel ? HD_OPEN_B2CHANNEL : HD_OPEN_B1CHANNEL;
-	ret = req_submit(bcs, req, 0, BAS_TIMEOUT);
-	if (ret < 0) {
-		dev_err(cs->dev, "could not open channel B%d\n",
-			bcs->channel + 1);
-		stopurbs(bcs->hw.bas);
-	}
-
-	spin_unlock_irqrestore(&cs->lock, flags);
-	if (ret < 0 && ret != -ENODEV)
-		error_hangup(bcs);
-	return ret;
-}
-
-/* gigaset_close_bchannel
- * called by common.c to disconnect a B channel
- * tell the Gigaset base to close the channel
- * stopping isochronous I/O and LL notification will be done when the
- * acknowledgement for the close arrives
- * argument:
- *	B channel control structure
- * return value:
- *	0 on success, error code < 0 on error
- */
-static int gigaset_close_bchannel(struct bc_state *bcs)
-{
-	struct cardstate *cs = bcs->cs;
-	int req, ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cs->lock, flags);
-	if (unlikely(!cs->connected)) {
-		spin_unlock_irqrestore(&cs->lock, flags);
-		gig_dbg(DEBUG_USBREQ, "%s: not connected", __func__);
-		return -ENODEV;
-	}
-
-	if (!(cs->hw.bas->basstate & (bcs->channel ? BS_B2OPEN : BS_B1OPEN))) {
-		/* channel not running: just signal common.c */
-		spin_unlock_irqrestore(&cs->lock, flags);
-		gigaset_bchannel_down(bcs);
-		return 0;
-	}
-
-	/* channel running: tell device to close it */
-	req = bcs->channel ? HD_CLOSE_B2CHANNEL : HD_CLOSE_B1CHANNEL;
-	ret = req_submit(bcs, req, 0, BAS_TIMEOUT);
-	if (ret < 0)
-		dev_err(cs->dev, "closing channel B%d failed\n",
-			bcs->channel + 1);
-
-	spin_unlock_irqrestore(&cs->lock, flags);
-	return ret;
-}
-
-/* Device Operations */
-/* ================= */
-
-/* complete_cb
- * unqueue first command buffer from queue, waking any sleepers
- * must be called with cs->cmdlock held
- * parameter:
- *	cs	controller state structure
- */
-static void complete_cb(struct cardstate *cs)
-{
-	struct cmdbuf_t *cb = cs->cmdbuf;
-
-	/* unqueue completed buffer */
-	cs->cmdbytes -= cs->curlen;
-	gig_dbg(DEBUG_OUTPUT, "write_command: sent %u bytes, %u left",
-		cs->curlen, cs->cmdbytes);
-	if (cb->next != NULL) {
-		cs->cmdbuf = cb->next;
-		cs->cmdbuf->prev = NULL;
-		cs->curlen = cs->cmdbuf->len;
-	} else {
-		cs->cmdbuf = NULL;
-		cs->lastcmdbuf = NULL;
-		cs->curlen = 0;
-	}
-
-	if (cb->wake_tasklet)
-		tasklet_schedule(cb->wake_tasklet);
-
-	kfree(cb);
-}
-
-/* write_command_callback
- * USB completion handler for AT command transmission
- * called by the USB subsystem in interrupt context
- * parameter:
- *	urb	USB request block of completed request
- *		urb->context = controller state structure
- */
-static void write_command_callback(struct urb *urb)
-{
-	struct cardstate *cs = urb->context;
-	struct bas_cardstate *ucs = cs->hw.bas;
-	int status = urb->status;
-	unsigned long flags;
-
-	update_basstate(ucs, 0, BS_ATWRPEND);
-	wake_up(&ucs->waitqueue);
-
-	/* check status */
-	switch (status) {
-	case 0:					/* normal completion */
-		break;
-	case -ENOENT:			/* cancelled */
-	case -ECONNRESET:		/* cancelled (async) */
-	case -EINPROGRESS:		/* pending */
-	case -ENODEV:			/* device removed */
-	case -ESHUTDOWN:		/* device shut down */
-		/* ignore silently */
-		gig_dbg(DEBUG_USBREQ, "%s: %s",
-			__func__, get_usb_statmsg(status));
-		return;
-	default:				/* any failure */
-		if (++ucs->retry_cmd_out > BAS_RETRY) {
-			dev_warn(cs->dev,
-				 "command write: %s, "
-				 "giving up after %d retries\n",
-				 get_usb_statmsg(status),
-				 ucs->retry_cmd_out);
-			break;
-		}
-		if (ucs->basstate & BS_SUSPEND) {
-			dev_warn(cs->dev,
-				 "command write: %s, "
-				 "won't retry - suspend requested\n",
-				 get_usb_statmsg(status));
-			break;
-		}
-		if (cs->cmdbuf == NULL) {
-			dev_warn(cs->dev,
-				 "command write: %s, "
-				 "cannot retry - cmdbuf gone\n",
-				 get_usb_statmsg(status));
-			break;
-		}
-		dev_notice(cs->dev, "command write: %s, retry %d\n",
-			   get_usb_statmsg(status), ucs->retry_cmd_out);
-		if (atwrite_submit(cs, cs->cmdbuf->buf, cs->cmdbuf->len) >= 0)
-			/* resubmitted - bypass regular exit block */
-			return;
-		/* command send failed, assume base still waiting */
-		update_basstate(ucs, BS_ATREADY, 0);
-	}
-
-	spin_lock_irqsave(&cs->cmdlock, flags);
-	if (cs->cmdbuf != NULL)
-		complete_cb(cs);
-	spin_unlock_irqrestore(&cs->cmdlock, flags);
-}
-
-/* atrdy_timeout
- * timeout routine for AT command transmission
- * argument:
- *	controller state structure
- */
-static void atrdy_timeout(struct timer_list *t)
-{
-	struct bas_cardstate *ucs = from_timer(ucs, t, timer_atrdy);
-	struct cardstate *cs = ucs->cs;
-
-	dev_warn(cs->dev, "timeout waiting for HD_READY_SEND_ATDATA\n");
-
-	/* fake the missing signal - what else can I do? */
-	update_basstate(ucs, BS_ATREADY, BS_ATTIMER);
-	start_cbsend(cs);
-}
-
-/* atwrite_submit
- * submit an HD_WRITE_ATMESSAGE command URB
- * parameters:
- *	cs	controller state structure
- *	buf	buffer containing command to send
- *	len	length of command to send
- * return value:
- *	0 on success
- *	-EBUSY if another request is pending
- *	any URB submission error code
- */
-static int atwrite_submit(struct cardstate *cs, unsigned char *buf, int len)
-{
-	struct bas_cardstate *ucs = cs->hw.bas;
-	int rc;
-
-	gig_dbg(DEBUG_USBREQ, "-------> HD_WRITE_ATMESSAGE (%d)", len);
-
-	if (update_basstate(ucs, BS_ATWRPEND, 0) & BS_ATWRPEND) {
-		dev_err(cs->dev,
-			"could not submit HD_WRITE_ATMESSAGE: URB busy\n");
-		return -EBUSY;
-	}
-
-	ucs->dr_cmd_out.bRequestType = OUT_VENDOR_REQ;
-	ucs->dr_cmd_out.bRequest = HD_WRITE_ATMESSAGE;
-	ucs->dr_cmd_out.wValue = 0;
-	ucs->dr_cmd_out.wIndex = 0;
-	ucs->dr_cmd_out.wLength = cpu_to_le16(len);
-	usb_fill_control_urb(ucs->urb_cmd_out, ucs->udev,
-			     usb_sndctrlpipe(ucs->udev, 0),
-			     (unsigned char *) &ucs->dr_cmd_out, buf, len,
-			     write_command_callback, cs);
-	rc = usb_submit_urb(ucs->urb_cmd_out, GFP_ATOMIC);
-	if (unlikely(rc)) {
-		update_basstate(ucs, 0, BS_ATWRPEND);
-		dev_err(cs->dev, "could not submit HD_WRITE_ATMESSAGE: %s\n",
-			get_usb_rcmsg(rc));
-		return rc;
-	}
-
-	/* submitted successfully, start timeout if necessary */
-	if (!(update_basstate(ucs, BS_ATTIMER, BS_ATREADY) & BS_ATTIMER)) {
-		gig_dbg(DEBUG_OUTPUT, "setting ATREADY timeout of %d/10 secs",
-			ATRDY_TIMEOUT);
-		mod_timer(&ucs->timer_atrdy, jiffies + ATRDY_TIMEOUT * HZ / 10);
-	}
-	return 0;
-}
-
-/* start_cbsend
- * start transmission of AT command queue if necessary
- * parameter:
- *	cs		controller state structure
- * return value:
- *	0 on success
- *	error code < 0 on error
- */
-static int start_cbsend(struct cardstate *cs)
-{
-	struct cmdbuf_t *cb;
-	struct bas_cardstate *ucs = cs->hw.bas;
-	unsigned long flags;
-	int rc;
-	int retval = 0;
-
-	/* check if suspend requested */
-	if (ucs->basstate & BS_SUSPEND) {
-		gig_dbg(DEBUG_OUTPUT, "suspending");
-		return -EHOSTUNREACH;
-	}
-
-	/* check if AT channel is open */
-	if (!(ucs->basstate & BS_ATOPEN)) {
-		gig_dbg(DEBUG_OUTPUT, "AT channel not open");
-		rc = req_submit(cs->bcs, HD_OPEN_ATCHANNEL, 0, BAS_TIMEOUT);
-		if (rc < 0) {
-			/* flush command queue */
-			spin_lock_irqsave(&cs->cmdlock, flags);
-			while (cs->cmdbuf != NULL)
-				complete_cb(cs);
-			spin_unlock_irqrestore(&cs->cmdlock, flags);
-		}
-		return rc;
-	}
-
-	/* try to send first command in queue */
-	spin_lock_irqsave(&cs->cmdlock, flags);
-
-	while ((cb = cs->cmdbuf) != NULL && (ucs->basstate & BS_ATREADY)) {
-		ucs->retry_cmd_out = 0;
-		rc = atwrite_submit(cs, cb->buf, cb->len);
-		if (unlikely(rc)) {
-			retval = rc;
-			complete_cb(cs);
-		}
-	}
-
-	spin_unlock_irqrestore(&cs->cmdlock, flags);
-	return retval;
-}
-
-/* gigaset_write_cmd
- * This function is called by the device independent part of the driver
- * to transmit an AT command string to the Gigaset device.
- * It encapsulates the device specific method for transmission over the
- * direct USB connection to the base.
- * The command string is added to the queue of commands to send, and
- * USB transmission is started if necessary.
- * parameters:
- *	cs		controller state structure
- *	cb		command buffer structure
- * return value:
- *	number of bytes queued on success
- *	error code < 0 on error
- */
-static int gigaset_write_cmd(struct cardstate *cs, struct cmdbuf_t *cb)
-{
-	unsigned long flags;
-	int rc;
-
-	gigaset_dbg_buffer(cs->mstate != MS_LOCKED ?
-			   DEBUG_TRANSCMD : DEBUG_LOCKCMD,
-			   "CMD Transmit", cb->len, cb->buf);
-
-	/* translate "+++" escape sequence sent as a single separate command
-	 * into "close AT channel" command for error recovery
-	 * The next command will reopen the AT channel automatically.
-	 */
-	if (cb->len == 3 && !memcmp(cb->buf, "+++", 3)) {
-		/* If an HD_RECEIVEATDATA_ACK message remains unhandled
-		 * because of an error, the base never sends another one.
-		 * The response channel is thus effectively blocked.
-		 * Closing and reopening the AT channel does *not* clear
-		 * this condition.
-		 * As a stopgap measure, submit a zero-length AT read
-		 * before closing the AT channel. This has the undocumented
-		 * effect of triggering a new HD_RECEIVEATDATA_ACK message
-		 * from the base if necessary.
-		 * The subsequent AT channel close then discards any pending
-		 * messages.
-		 */
-		spin_lock_irqsave(&cs->lock, flags);
-		if (!(cs->hw.bas->basstate & BS_ATRDPEND)) {
-			kfree(cs->hw.bas->rcvbuf);
-			cs->hw.bas->rcvbuf = NULL;
-			cs->hw.bas->rcvbuf_size = 0;
-			cs->hw.bas->retry_cmd_in = 0;
-			atread_submit(cs, 0);
-		}
-		spin_unlock_irqrestore(&cs->lock, flags);
-
-		rc = req_submit(cs->bcs, HD_CLOSE_ATCHANNEL, 0, BAS_TIMEOUT);
-		if (cb->wake_tasklet)
-			tasklet_schedule(cb->wake_tasklet);
-		if (!rc)
-			rc = cb->len;
-		kfree(cb);
-		return rc;
-	}
-
-	spin_lock_irqsave(&cs->cmdlock, flags);
-	cb->prev = cs->lastcmdbuf;
-	if (cs->lastcmdbuf)
-		cs->lastcmdbuf->next = cb;
-	else {
-		cs->cmdbuf = cb;
-		cs->curlen = cb->len;
-	}
-	cs->cmdbytes += cb->len;
-	cs->lastcmdbuf = cb;
-	spin_unlock_irqrestore(&cs->cmdlock, flags);
-
-	spin_lock_irqsave(&cs->lock, flags);
-	if (unlikely(!cs->connected)) {
-		spin_unlock_irqrestore(&cs->lock, flags);
-		gig_dbg(DEBUG_USBREQ, "%s: not connected", __func__);
-		/* flush command queue */
-		spin_lock_irqsave(&cs->cmdlock, flags);
-		while (cs->cmdbuf != NULL)
-			complete_cb(cs);
-		spin_unlock_irqrestore(&cs->cmdlock, flags);
-		return -ENODEV;
-	}
-	rc = start_cbsend(cs);
-	spin_unlock_irqrestore(&cs->lock, flags);
-	return rc < 0 ? rc : cb->len;
-}
-
-/* gigaset_write_room
- * tty_driver.write_room interface routine
- * return number of characters the driver will accept to be written via
- * gigaset_write_cmd
- * parameter:
- *	controller state structure
- * return value:
- *	number of characters
- */
-static int gigaset_write_room(struct cardstate *cs)
-{
-	return IF_WRITEBUF;
-}
-
-/* gigaset_chars_in_buffer
- * tty_driver.chars_in_buffer interface routine
- * return number of characters waiting to be sent
- * parameter:
- *	controller state structure
- * return value:
- *	number of characters
- */
-static int gigaset_chars_in_buffer(struct cardstate *cs)
-{
-	return cs->cmdbytes;
-}
-
-/* gigaset_brkchars
- * implementation of ioctl(GIGASET_BRKCHARS)
- * parameter:
- *	controller state structure
- * return value:
- *	-EINVAL (unimplemented function)
- */
-static int gigaset_brkchars(struct cardstate *cs, const unsigned char buf[6])
-{
-	return -EINVAL;
-}
-
-
-/* Device Initialization/Shutdown */
-/* ============================== */
-
-/* Free hardware dependent part of the B channel structure
- * parameter:
- *	bcs	B channel structure
- */
-static void gigaset_freebcshw(struct bc_state *bcs)
-{
-	struct bas_bc_state *ubc = bcs->hw.bas;
-	int i;
-
-	if (!ubc)
-		return;
-
-	/* kill URBs and tasklets before freeing - better safe than sorry */
-	ubc->running = 0;
-	gig_dbg(DEBUG_INIT, "%s: killing isoc URBs", __func__);
-	for (i = 0; i < BAS_OUTURBS; ++i) {
-		usb_kill_urb(ubc->isoouturbs[i].urb);
-		usb_free_urb(ubc->isoouturbs[i].urb);
-	}
-	for (i = 0; i < BAS_INURBS; ++i) {
-		usb_kill_urb(ubc->isoinurbs[i]);
-		usb_free_urb(ubc->isoinurbs[i]);
-	}
-	tasklet_kill(&ubc->sent_tasklet);
-	tasklet_kill(&ubc->rcvd_tasklet);
-	kfree(ubc->isooutbuf);
-	kfree(ubc);
-	bcs->hw.bas = NULL;
-}
-
-/* Initialize hardware dependent part of the B channel structure
- * parameter:
- *	bcs	B channel structure
- * return value:
- *	0 on success, error code < 0 on failure
- */
-static int gigaset_initbcshw(struct bc_state *bcs)
-{
-	int i;
-	struct bas_bc_state *ubc;
-
-	bcs->hw.bas = ubc = kmalloc(sizeof(struct bas_bc_state), GFP_KERNEL);
-	if (!ubc) {
-		pr_err("out of memory\n");
-		return -ENOMEM;
-	}
-
-	ubc->running = 0;
-	atomic_set(&ubc->corrbytes, 0);
-	spin_lock_init(&ubc->isooutlock);
-	for (i = 0; i < BAS_OUTURBS; ++i) {
-		ubc->isoouturbs[i].urb = NULL;
-		ubc->isoouturbs[i].bcs = bcs;
-	}
-	ubc->isooutdone = ubc->isooutfree = ubc->isooutovfl = NULL;
-	ubc->numsub = 0;
-	ubc->isooutbuf = kmalloc(sizeof(struct isowbuf_t), GFP_KERNEL);
-	if (!ubc->isooutbuf) {
-		pr_err("out of memory\n");
-		kfree(ubc);
-		bcs->hw.bas = NULL;
-		return -ENOMEM;
-	}
-	tasklet_init(&ubc->sent_tasklet,
-		     write_iso_tasklet, (unsigned long) bcs);
-
-	spin_lock_init(&ubc->isoinlock);
-	for (i = 0; i < BAS_INURBS; ++i)
-		ubc->isoinurbs[i] = NULL;
-	ubc->isoindone = NULL;
-	ubc->loststatus = -EINPROGRESS;
-	ubc->isoinlost = 0;
-	ubc->seqlen = 0;
-	ubc->inbyte = 0;
-	ubc->inbits = 0;
-	ubc->goodbytes = 0;
-	ubc->alignerrs = 0;
-	ubc->fcserrs = 0;
-	ubc->frameerrs = 0;
-	ubc->giants = 0;
-	ubc->runts = 0;
-	ubc->aborts = 0;
-	ubc->shared0s = 0;
-	ubc->stolen0s = 0;
-	tasklet_init(&ubc->rcvd_tasklet,
-		     read_iso_tasklet, (unsigned long) bcs);
-	return 0;
-}
-
-static void gigaset_reinitbcshw(struct bc_state *bcs)
-{
-	struct bas_bc_state *ubc = bcs->hw.bas;
-
-	bcs->hw.bas->running = 0;
-	atomic_set(&bcs->hw.bas->corrbytes, 0);
-	bcs->hw.bas->numsub = 0;
-	spin_lock_init(&ubc->isooutlock);
-	spin_lock_init(&ubc->isoinlock);
-	ubc->loststatus = -EINPROGRESS;
-}
-
-static void gigaset_freecshw(struct cardstate *cs)
-{
-	/* timers, URBs and rcvbuf are disposed of in disconnect */
-	kfree(cs->hw.bas->int_in_buf);
-	kfree(cs->hw.bas);
-	cs->hw.bas = NULL;
-}
-
-/* Initialize hardware dependent part of the cardstate structure
- * parameter:
- *	cs	cardstate structure
- * return value:
- *	0 on success, error code < 0 on failure
- */
-static int gigaset_initcshw(struct cardstate *cs)
-{
-	struct bas_cardstate *ucs;
-
-	cs->hw.bas = ucs = kzalloc(sizeof(*ucs), GFP_KERNEL);
-	if (!ucs) {
-		pr_err("out of memory\n");
-		return -ENOMEM;
-	}
-	ucs->int_in_buf = kmalloc(IP_MSGSIZE, GFP_KERNEL);
-	if (!ucs->int_in_buf) {
-		kfree(ucs);
-		pr_err("out of memory\n");
-		return -ENOMEM;
-	}
-
-	spin_lock_init(&ucs->lock);
-	ucs->cs = cs;
-	timer_setup(&ucs->timer_ctrl, req_timeout, 0);
-	timer_setup(&ucs->timer_atrdy, atrdy_timeout, 0);
-	timer_setup(&ucs->timer_cmd_in, cmd_in_timeout, 0);
-	timer_setup(&ucs->timer_int_in, int_in_resubmit, 0);
-	init_waitqueue_head(&ucs->waitqueue);
-	INIT_WORK(&ucs->int_in_wq, int_in_work);
-
-	return 0;
-}
-
-/* freeurbs
- * unlink and deallocate all URBs unconditionally
- * caller must make sure that no commands are still in progress
- * parameter:
- *	cs	controller state structure
- */
-static void freeurbs(struct cardstate *cs)
-{
-	struct bas_cardstate *ucs = cs->hw.bas;
-	struct bas_bc_state *ubc;
-	int i, j;
-
-	gig_dbg(DEBUG_INIT, "%s: killing URBs", __func__);
-	for (j = 0; j < BAS_CHANNELS; ++j) {
-		ubc = cs->bcs[j].hw.bas;
-		for (i = 0; i < BAS_OUTURBS; ++i) {
-			usb_kill_urb(ubc->isoouturbs[i].urb);
-			usb_free_urb(ubc->isoouturbs[i].urb);
-			ubc->isoouturbs[i].urb = NULL;
-		}
-		for (i = 0; i < BAS_INURBS; ++i) {
-			usb_kill_urb(ubc->isoinurbs[i]);
-			usb_free_urb(ubc->isoinurbs[i]);
-			ubc->isoinurbs[i] = NULL;
-		}
-	}
-	usb_kill_urb(ucs->urb_int_in);
-	usb_free_urb(ucs->urb_int_in);
-	ucs->urb_int_in = NULL;
-	usb_kill_urb(ucs->urb_cmd_out);
-	usb_free_urb(ucs->urb_cmd_out);
-	ucs->urb_cmd_out = NULL;
-	usb_kill_urb(ucs->urb_cmd_in);
-	usb_free_urb(ucs->urb_cmd_in);
-	ucs->urb_cmd_in = NULL;
-	usb_kill_urb(ucs->urb_ctrl);
-	usb_free_urb(ucs->urb_ctrl);
-	ucs->urb_ctrl = NULL;
-}
-
-/* gigaset_probe
- * This function is called when a new USB device is connected.
- * It checks whether the new device is handled by this driver.
- */
-static int gigaset_probe(struct usb_interface *interface,
-			 const struct usb_device_id *id)
-{
-	struct usb_host_interface *hostif;
-	struct usb_device *udev = interface_to_usbdev(interface);
-	struct cardstate *cs = NULL;
-	struct bas_cardstate *ucs = NULL;
-	struct bas_bc_state *ubc;
-	struct usb_endpoint_descriptor *endpoint;
-	int i, j;
-	int rc;
-
-	gig_dbg(DEBUG_INIT,
-		"%s: Check if device matches .. (Vendor: 0x%x, Product: 0x%x)",
-		__func__, le16_to_cpu(udev->descriptor.idVendor),
-		le16_to_cpu(udev->descriptor.idProduct));
-
-	/* set required alternate setting */
-	hostif = interface->cur_altsetting;
-	if (hostif->desc.bAlternateSetting != 3) {
-		gig_dbg(DEBUG_INIT,
-			"%s: wrong alternate setting %d - trying to switch",
-			__func__, hostif->desc.bAlternateSetting);
-		if (usb_set_interface(udev, hostif->desc.bInterfaceNumber, 3)
-		    < 0) {
-			dev_warn(&udev->dev, "usb_set_interface failed, "
-				 "device %d interface %d altsetting %d\n",
-				 udev->devnum, hostif->desc.bInterfaceNumber,
-				 hostif->desc.bAlternateSetting);
-			return -ENODEV;
-		}
-		hostif = interface->cur_altsetting;
-	}
-
-	/* Reject application specific interfaces
-	 */
-	if (hostif->desc.bInterfaceClass != 255) {
-		dev_warn(&udev->dev, "%s: bInterfaceClass == %d\n",
-			 __func__, hostif->desc.bInterfaceClass);
-		return -ENODEV;
-	}
-
-	if (hostif->desc.bNumEndpoints < 1)
-		return -ENODEV;
-
-	dev_info(&udev->dev,
-		 "%s: Device matched (Vendor: 0x%x, Product: 0x%x)\n",
-		 __func__, le16_to_cpu(udev->descriptor.idVendor),
-		 le16_to_cpu(udev->descriptor.idProduct));
-
-	/* allocate memory for our device state and initialize it */
-	cs = gigaset_initcs(driver, BAS_CHANNELS, 0, 0, cidmode,
-			    GIGASET_MODULENAME);
-	if (!cs)
-		return -ENODEV;
-	ucs = cs->hw.bas;
-
-	/* save off device structure ptrs for later use */
-	usb_get_dev(udev);
-	ucs->udev = udev;
-	ucs->interface = interface;
-	cs->dev = &interface->dev;
-
-	/* allocate URBs:
-	 * - one for the interrupt pipe
-	 * - three for the different uses of the default control pipe
-	 * - three for each isochronous pipe
-	 */
-	if (!(ucs->urb_int_in = usb_alloc_urb(0, GFP_KERNEL)) ||
-	    !(ucs->urb_cmd_in = usb_alloc_urb(0, GFP_KERNEL)) ||
-	    !(ucs->urb_cmd_out = usb_alloc_urb(0, GFP_KERNEL)) ||
-	    !(ucs->urb_ctrl = usb_alloc_urb(0, GFP_KERNEL)))
-		goto allocerr;
-
-	for (j = 0; j < BAS_CHANNELS; ++j) {
-		ubc = cs->bcs[j].hw.bas;
-		for (i = 0; i < BAS_OUTURBS; ++i)
-			if (!(ubc->isoouturbs[i].urb =
-			      usb_alloc_urb(BAS_NUMFRAMES, GFP_KERNEL)))
-				goto allocerr;
-		for (i = 0; i < BAS_INURBS; ++i)
-			if (!(ubc->isoinurbs[i] =
-			      usb_alloc_urb(BAS_NUMFRAMES, GFP_KERNEL)))
-				goto allocerr;
-	}
-
-	ucs->rcvbuf = NULL;
-	ucs->rcvbuf_size = 0;
-
-	/* Fill the interrupt urb and send it to the core */
-	endpoint = &hostif->endpoint[0].desc;
-	usb_fill_int_urb(ucs->urb_int_in, udev,
-			 usb_rcvintpipe(udev,
-					usb_endpoint_num(endpoint)),
-			 ucs->int_in_buf, IP_MSGSIZE, read_int_callback, cs,
-			 endpoint->bInterval);
-	rc = usb_submit_urb(ucs->urb_int_in, GFP_KERNEL);
-	if (rc != 0) {
-		dev_err(cs->dev, "could not submit interrupt URB: %s\n",
-			get_usb_rcmsg(rc));
-		goto error;
-	}
-	ucs->retry_int_in = 0;
-
-	/* tell the device that the driver is ready */
-	rc = req_submit(cs->bcs, HD_DEVICE_INIT_ACK, 0, 0);
-	if (rc != 0)
-		goto error;
-
-	/* tell common part that the device is ready */
-	if (startmode == SM_LOCKED)
-		cs->mstate = MS_LOCKED;
-
-	/* save address of controller structure */
-	usb_set_intfdata(interface, cs);
-
-	rc = gigaset_start(cs);
-	if (rc < 0)
-		goto error;
-
-	return 0;
-
-allocerr:
-	dev_err(cs->dev, "could not allocate URBs\n");
-	rc = -ENOMEM;
-error:
-	freeurbs(cs);
-	usb_set_intfdata(interface, NULL);
-	usb_put_dev(udev);
-	gigaset_freecs(cs);
-	return rc;
-}
-
-/* gigaset_disconnect
- * This function is called when the Gigaset base is unplugged.
- */
-static void gigaset_disconnect(struct usb_interface *interface)
-{
-	struct cardstate *cs;
-	struct bas_cardstate *ucs;
-	int j;
-
-	cs = usb_get_intfdata(interface);
-
-	ucs = cs->hw.bas;
-
-	dev_info(cs->dev, "disconnecting Gigaset base\n");
-
-	/* mark base as not ready, all channels disconnected */
-	ucs->basstate = 0;
-
-	/* tell LL all channels are down */
-	for (j = 0; j < BAS_CHANNELS; ++j)
-		gigaset_bchannel_down(cs->bcs + j);
-
-	/* stop driver (common part) */
-	gigaset_stop(cs);
-
-	/* stop delayed work and URBs, free ressources */
-	del_timer_sync(&ucs->timer_ctrl);
-	del_timer_sync(&ucs->timer_atrdy);
-	del_timer_sync(&ucs->timer_cmd_in);
-	del_timer_sync(&ucs->timer_int_in);
-	cancel_work_sync(&ucs->int_in_wq);
-	freeurbs(cs);
-	usb_set_intfdata(interface, NULL);
-	kfree(ucs->rcvbuf);
-	ucs->rcvbuf = NULL;
-	ucs->rcvbuf_size = 0;
-	usb_put_dev(ucs->udev);
-	ucs->interface = NULL;
-	ucs->udev = NULL;
-	cs->dev = NULL;
-	gigaset_freecs(cs);
-}
-
-/* gigaset_suspend
- * This function is called before the USB connection is suspended
- * or before the USB device is reset.
- * In the latter case, message == PMSG_ON.
- */
-static int gigaset_suspend(struct usb_interface *intf, pm_message_t message)
-{
-	struct cardstate *cs = usb_get_intfdata(intf);
-	struct bas_cardstate *ucs = cs->hw.bas;
-	int rc;
-
-	/* set suspend flag; this stops AT command/response traffic */
-	if (update_basstate(ucs, BS_SUSPEND, 0) & BS_SUSPEND) {
-		gig_dbg(DEBUG_SUSPEND, "already suspended");
-		return 0;
-	}
-
-	/* wait a bit for blocking conditions to go away */
-	rc = wait_event_timeout(ucs->waitqueue,
-				!(ucs->basstate &
-				  (BS_B1OPEN | BS_B2OPEN | BS_ATRDPEND | BS_ATWRPEND)),
-				BAS_TIMEOUT * HZ / 10);
-	gig_dbg(DEBUG_SUSPEND, "wait_event_timeout() -> %d", rc);
-
-	/* check for conditions preventing suspend */
-	if (ucs->basstate & (BS_B1OPEN | BS_B2OPEN | BS_ATRDPEND | BS_ATWRPEND)) {
-		dev_warn(cs->dev, "cannot suspend:\n");
-		if (ucs->basstate & BS_B1OPEN)
-			dev_warn(cs->dev, " B channel 1 open\n");
-		if (ucs->basstate & BS_B2OPEN)
-			dev_warn(cs->dev, " B channel 2 open\n");
-		if (ucs->basstate & BS_ATRDPEND)
-			dev_warn(cs->dev, " receiving AT reply\n");
-		if (ucs->basstate & BS_ATWRPEND)
-			dev_warn(cs->dev, " sending AT command\n");
-		update_basstate(ucs, 0, BS_SUSPEND);
-		return -EBUSY;
-	}
-
-	/* close AT channel if open */
-	if (ucs->basstate & BS_ATOPEN) {
-		gig_dbg(DEBUG_SUSPEND, "closing AT channel");
-		rc = req_submit(cs->bcs, HD_CLOSE_ATCHANNEL, 0, 0);
-		if (rc) {
-			update_basstate(ucs, 0, BS_SUSPEND);
-			return rc;
-		}
-		wait_event_timeout(ucs->waitqueue, !ucs->pending,
-				   BAS_TIMEOUT * HZ / 10);
-		/* in case of timeout, proceed anyway */
-	}
-
-	/* kill all URBs and delayed work that might still be pending */
-	usb_kill_urb(ucs->urb_ctrl);
-	usb_kill_urb(ucs->urb_int_in);
-	del_timer_sync(&ucs->timer_ctrl);
-	del_timer_sync(&ucs->timer_atrdy);
-	del_timer_sync(&ucs->timer_cmd_in);
-	del_timer_sync(&ucs->timer_int_in);
-
-	/* don't try to cancel int_in_wq from within reset as it
-	 * might be the one requesting the reset
-	 */
-	if (message.event != PM_EVENT_ON)
-		cancel_work_sync(&ucs->int_in_wq);
-
-	gig_dbg(DEBUG_SUSPEND, "suspend complete");
-	return 0;
-}
-
-/* gigaset_resume
- * This function is called after the USB connection has been resumed.
- */
-static int gigaset_resume(struct usb_interface *intf)
-{
-	struct cardstate *cs = usb_get_intfdata(intf);
-	struct bas_cardstate *ucs = cs->hw.bas;
-	int rc;
-
-	/* resubmit interrupt URB for spontaneous messages from base */
-	rc = usb_submit_urb(ucs->urb_int_in, GFP_KERNEL);
-	if (rc) {
-		dev_err(cs->dev, "could not resubmit interrupt URB: %s\n",
-			get_usb_rcmsg(rc));
-		return rc;
-	}
-	ucs->retry_int_in = 0;
-
-	/* clear suspend flag to reallow activity */
-	update_basstate(ucs, 0, BS_SUSPEND);
-
-	gig_dbg(DEBUG_SUSPEND, "resume complete");
-	return 0;
-}
-
-/* gigaset_pre_reset
- * This function is called before the USB connection is reset.
- */
-static int gigaset_pre_reset(struct usb_interface *intf)
-{
-	/* handle just like suspend */
-	return gigaset_suspend(intf, PMSG_ON);
-}
-
-/* gigaset_post_reset
- * This function is called after the USB connection has been reset.
- */
-static int gigaset_post_reset(struct usb_interface *intf)
-{
-	/* FIXME: send HD_DEVICE_INIT_ACK? */
-
-	/* resume operations */
-	return gigaset_resume(intf);
-}
-
-
-static const struct gigaset_ops gigops = {
-	.write_cmd = gigaset_write_cmd,
-	.write_room = gigaset_write_room,
-	.chars_in_buffer = gigaset_chars_in_buffer,
-	.brkchars = gigaset_brkchars,
-	.init_bchannel = gigaset_init_bchannel,
-	.close_bchannel = gigaset_close_bchannel,
-	.initbcshw = gigaset_initbcshw,
-	.freebcshw = gigaset_freebcshw,
-	.reinitbcshw = gigaset_reinitbcshw,
-	.initcshw = gigaset_initcshw,
-	.freecshw = gigaset_freecshw,
-	.set_modem_ctrl = gigaset_set_modem_ctrl,
-	.baud_rate = gigaset_baud_rate,
-	.set_line_ctrl = gigaset_set_line_ctrl,
-	.send_skb = gigaset_isoc_send_skb,
-	.handle_input = gigaset_isoc_input,
-};
-
-/* bas_gigaset_init
- * This function is called after the kernel module is loaded.
- */
-static int __init bas_gigaset_init(void)
-{
-	int result;
-
-	/* allocate memory for our driver state and initialize it */
-	driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
-				    GIGASET_MODULENAME, GIGASET_DEVNAME,
-				    &gigops, THIS_MODULE);
-	if (driver == NULL)
-		goto error;
-
-	/* register this driver with the USB subsystem */
-	result = usb_register(&gigaset_usb_driver);
-	if (result < 0) {
-		pr_err("error %d registering USB driver\n", -result);
-		goto error;
-	}
-
-	pr_info(DRIVER_DESC "\n");
-	return 0;
-
-error:
-	if (driver)
-		gigaset_freedriver(driver);
-	driver = NULL;
-	return -1;
-}
-
-/* bas_gigaset_exit
- * This function is called before the kernel module is unloaded.
- */
-static void __exit bas_gigaset_exit(void)
-{
-	struct bas_cardstate *ucs;
-	int i;
-
-	gigaset_blockdriver(driver); /* => probe will fail
-				      * => no gigaset_start any more
-				      */
-
-	/* stop all connected devices */
-	for (i = 0; i < driver->minors; i++) {
-		if (gigaset_shutdown(driver->cs + i) < 0)
-			continue;		/* no device */
-		/* from now on, no isdn callback should be possible */
-
-		/* close all still open channels */
-		ucs = driver->cs[i].hw.bas;
-		if (ucs->basstate & BS_B1OPEN) {
-			gig_dbg(DEBUG_INIT, "closing B1 channel");
-			usb_control_msg(ucs->udev,
-					usb_sndctrlpipe(ucs->udev, 0),
-					HD_CLOSE_B1CHANNEL, OUT_VENDOR_REQ,
-					0, 0, NULL, 0, BAS_TIMEOUT);
-		}
-		if (ucs->basstate & BS_B2OPEN) {
-			gig_dbg(DEBUG_INIT, "closing B2 channel");
-			usb_control_msg(ucs->udev,
-					usb_sndctrlpipe(ucs->udev, 0),
-					HD_CLOSE_B2CHANNEL, OUT_VENDOR_REQ,
-					0, 0, NULL, 0, BAS_TIMEOUT);
-		}
-		if (ucs->basstate & BS_ATOPEN) {
-			gig_dbg(DEBUG_INIT, "closing AT channel");
-			usb_control_msg(ucs->udev,
-					usb_sndctrlpipe(ucs->udev, 0),
-					HD_CLOSE_ATCHANNEL, OUT_VENDOR_REQ,
-					0, 0, NULL, 0, BAS_TIMEOUT);
-		}
-		ucs->basstate = 0;
-	}
-
-	/* deregister this driver with the USB subsystem */
-	usb_deregister(&gigaset_usb_driver);
-	/* this will call the disconnect-callback */
-	/* from now on, no disconnect/probe callback should be running */
-
-	gigaset_freedriver(driver);
-	driver = NULL;
-}
-
-
-module_init(bas_gigaset_init);
-module_exit(bas_gigaset_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/isdn/gigaset/capi.c b/drivers/staging/isdn/gigaset/capi.c
deleted file mode 100644
index 83d7dd48c61d..000000000000
--- a/drivers/staging/isdn/gigaset/capi.c
+++ /dev/null
@@ -1,2517 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Kernel CAPI interface for the Gigaset driver
- *
- * Copyright (c) 2009 by Tilman Schmidt <tilman@imap.cc>.
- *
- * =====================================================================
- * =====================================================================
- */
-
-#include "gigaset.h"
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/ratelimit.h>
-#include <linux/isdn/capilli.h>
-#include <linux/isdn/capicmd.h>
-#include <linux/isdn/capiutil.h>
-#include <linux/export.h>
-
-/* missing from kernelcapi.h */
-#define CapiNcpiNotSupportedByProtocol	0x0001
-#define CapiFlagsNotSupportedByProtocol	0x0002
-#define CapiAlertAlreadySent		0x0003
-#define CapiFacilitySpecificFunctionNotSupported	0x3011
-
-/* missing from capicmd.h */
-#define CAPI_CONNECT_IND_BASELEN	(CAPI_MSG_BASELEN + 4 + 2 + 8 * 1)
-#define CAPI_CONNECT_ACTIVE_IND_BASELEN	(CAPI_MSG_BASELEN + 4 + 3 * 1)
-#define CAPI_CONNECT_B3_IND_BASELEN	(CAPI_MSG_BASELEN + 4 + 1)
-#define CAPI_CONNECT_B3_ACTIVE_IND_BASELEN	(CAPI_MSG_BASELEN + 4 + 1)
-#define CAPI_DATA_B3_REQ_LEN64		(CAPI_MSG_BASELEN + 4 + 4 + 2 + 2 + 2 + 8)
-#define CAPI_DATA_B3_CONF_LEN		(CAPI_MSG_BASELEN + 4 + 2 + 2)
-#define CAPI_DISCONNECT_IND_LEN		(CAPI_MSG_BASELEN + 4 + 2)
-#define CAPI_DISCONNECT_B3_IND_BASELEN	(CAPI_MSG_BASELEN + 4 + 2 + 1)
-#define CAPI_FACILITY_CONF_BASELEN	(CAPI_MSG_BASELEN + 4 + 2 + 2 + 1)
-/* most _CONF messages contain only Controller/PLCI/NCCI and Info parameters */
-#define CAPI_STDCONF_LEN		(CAPI_MSG_BASELEN + 4 + 2)
-
-#define CAPI_FACILITY_HANDSET	0x0000
-#define CAPI_FACILITY_DTMF	0x0001
-#define CAPI_FACILITY_V42BIS	0x0002
-#define CAPI_FACILITY_SUPPSVC	0x0003
-#define CAPI_FACILITY_WAKEUP	0x0004
-#define CAPI_FACILITY_LI	0x0005
-
-#define CAPI_SUPPSVC_GETSUPPORTED	0x0000
-#define CAPI_SUPPSVC_LISTEN		0x0001
-
-/* missing from capiutil.h */
-#define CAPIMSG_PLCI_PART(m)	CAPIMSG_U8(m, 9)
-#define CAPIMSG_NCCI_PART(m)	CAPIMSG_U16(m, 10)
-#define CAPIMSG_HANDLE_REQ(m)	CAPIMSG_U16(m, 18) /* DATA_B3_REQ/_IND only! */
-#define CAPIMSG_FLAGS(m)	CAPIMSG_U16(m, 20)
-#define CAPIMSG_SETCONTROLLER(m, contr)	capimsg_setu8(m, 8, contr)
-#define CAPIMSG_SETPLCI_PART(m, plci)	capimsg_setu8(m, 9, plci)
-#define CAPIMSG_SETNCCI_PART(m, ncci)	capimsg_setu16(m, 10, ncci)
-#define CAPIMSG_SETFLAGS(m, flags)	capimsg_setu16(m, 20, flags)
-
-/* parameters with differing location in DATA_B3_CONF/_RESP: */
-#define CAPIMSG_SETHANDLE_CONF(m, handle)	capimsg_setu16(m, 12, handle)
-#define	CAPIMSG_SETINFO_CONF(m, info)		capimsg_setu16(m, 14, info)
-
-/* Flags (DATA_B3_REQ/_IND) */
-#define CAPI_FLAGS_DELIVERY_CONFIRMATION	0x04
-#define CAPI_FLAGS_RESERVED			(~0x1f)
-
-/* buffer sizes */
-#define MAX_BC_OCTETS 11
-#define MAX_HLC_OCTETS 3
-#define MAX_NUMBER_DIGITS 20
-#define MAX_FMT_IE_LEN 20
-
-/* values for bcs->apconnstate */
-#define APCONN_NONE	0	/* inactive/listening */
-#define APCONN_SETUP	1	/* connecting */
-#define APCONN_ACTIVE	2	/* B channel up */
-
-/* registered application data structure */
-struct gigaset_capi_appl {
-	struct list_head ctrlist;
-	struct gigaset_capi_appl *bcnext;
-	u16 id;
-	struct capi_register_params rp;
-	u16 nextMessageNumber;
-	u32 listenInfoMask;
-	u32 listenCIPmask;
-};
-
-/* CAPI specific controller data structure */
-struct gigaset_capi_ctr {
-	struct capi_ctr ctr;
-	struct list_head appls;
-	struct sk_buff_head sendqueue;
-	atomic_t sendqlen;
-	/* two _cmsg structures possibly used concurrently: */
-	_cmsg hcmsg;	/* for message composition triggered from hardware */
-	_cmsg acmsg;	/* for dissection of messages sent from application */
-	u8 bc_buf[MAX_BC_OCTETS + 1];
-	u8 hlc_buf[MAX_HLC_OCTETS + 1];
-	u8 cgpty_buf[MAX_NUMBER_DIGITS + 3];
-	u8 cdpty_buf[MAX_NUMBER_DIGITS + 2];
-};
-
-/* CIP Value table (from CAPI 2.0 standard, ch. 6.1) */
-static struct {
-	u8 *bc;
-	u8 *hlc;
-} cip2bchlc[] = {
-	[1] = { "8090A3", NULL },	/* Speech (A-law) */
-	[2] = { "8890", NULL },		/* Unrestricted digital information */
-	[3] = { "8990", NULL },		/* Restricted digital information */
-	[4] = { "9090A3", NULL },	/* 3,1 kHz audio (A-law) */
-	[5] = { "9190", NULL },		/* 7 kHz audio */
-	[6] = { "9890", NULL },		/* Video */
-	[7] = { "88C0C6E6", NULL },	/* Packet mode */
-	[8] = { "8890218F", NULL },	/* 56 kbit/s rate adaptation */
-	[9] = { "9190A5", NULL },	/* Unrestricted digital information
-					 * with tones/announcements */
-	[16] = { "8090A3", "9181" },	/* Telephony */
-	[17] = { "9090A3", "9184" },	/* Group 2/3 facsimile */
-	[18] = { "8890", "91A1" },	/* Group 4 facsimile Class 1 */
-	[19] = { "8890", "91A4" },	/* Teletex service basic and mixed mode
-					 * and Group 4 facsimile service
-					 * Classes II and III */
-	[20] = { "8890", "91A8" },	/* Teletex service basic and
-					 * processable mode */
-	[21] = { "8890", "91B1" },	/* Teletex service basic mode */
-	[22] = { "8890", "91B2" },	/* International interworking for
-					 * Videotex */
-	[23] = { "8890", "91B5" },	/* Telex */
-	[24] = { "8890", "91B8" },	/* Message Handling Systems
-					 * in accordance with X.400 */
-	[25] = { "8890", "91C1" },	/* OSI application
-					 * in accordance with X.200 */
-	[26] = { "9190A5", "9181" },	/* 7 kHz telephony */
-	[27] = { "9190A5", "916001" },	/* Video telephony, first connection */
-	[28] = { "8890", "916002" },	/* Video telephony, second connection */
-};
-
-/*
- * helper functions
- * ================
- */
-
-/*
- * emit unsupported parameter warning
- */
-static inline void ignore_cstruct_param(struct cardstate *cs, _cstruct param,
-					char *msgname, char *paramname)
-{
-	if (param && *param)
-		dev_warn(cs->dev, "%s: ignoring unsupported parameter: %s\n",
-			 msgname, paramname);
-}
-
-/*
- * convert an IE from Gigaset hex string to ETSI binary representation
- * including length byte
- * return value: result length, -1 on error
- */
-static int encode_ie(char *in, u8 *out, int maxlen)
-{
-	int l = 0;
-	while (*in) {
-		if (!isxdigit(in[0]) || !isxdigit(in[1]) || l >= maxlen)
-			return -1;
-		out[++l] = (hex_to_bin(in[0]) << 4) + hex_to_bin(in[1]);
-		in += 2;
-	}
-	out[0] = l;
-	return l;
-}
-
-/*
- * convert an IE from ETSI binary representation including length byte
- * to Gigaset hex string
- */
-static void decode_ie(u8 *in, char *out)
-{
-	int i = *in;
-	while (i-- > 0) {
-		/* ToDo: conversion to upper case necessary? */
-		*out++ = toupper(hex_asc_hi(*++in));
-		*out++ = toupper(hex_asc_lo(*in));
-	}
-}
-
-/*
- * retrieve application data structure for an application ID
- */
-static inline struct gigaset_capi_appl *
-get_appl(struct gigaset_capi_ctr *iif, u16 appl)
-{
-	struct gigaset_capi_appl *ap;
-
-	list_for_each_entry(ap, &iif->appls, ctrlist)
-		if (ap->id == appl)
-			return ap;
-	return NULL;
-}
-
-/*
- * dump CAPI message to kernel messages for debugging
- */
-static inline void dump_cmsg(enum debuglevel level, const char *tag, _cmsg *p)
-{
-#ifdef CONFIG_GIGASET_DEBUG
-	/* dump at most 20 messages in 20 secs */
-	static DEFINE_RATELIMIT_STATE(msg_dump_ratelimit, 20 * HZ, 20);
-	_cdebbuf *cdb;
-
-	if (!(gigaset_debuglevel & level))
-		return;
-	if (!___ratelimit(&msg_dump_ratelimit, tag))
-		return;
-
-	cdb = capi_cmsg2str(p);
-	if (cdb) {
-		gig_dbg(level, "%s: [%d] %s", tag, p->ApplId, cdb->buf);
-		cdebbuf_free(cdb);
-	} else {
-		gig_dbg(level, "%s: [%d] %s", tag, p->ApplId,
-			capi_cmd2str(p->Command, p->Subcommand));
-	}
-#endif
-}
-
-static inline void dump_rawmsg(enum debuglevel level, const char *tag,
-			       unsigned char *data)
-{
-#ifdef CONFIG_GIGASET_DEBUG
-	char *dbgline;
-	int i, l;
-
-	if (!(gigaset_debuglevel & level))
-		return;
-
-	l = CAPIMSG_LEN(data);
-	if (l < 12) {
-		gig_dbg(level, "%s: ??? LEN=%04d", tag, l);
-		return;
-	}
-	gig_dbg(level, "%s: 0x%02x:0x%02x: ID=%03d #0x%04x LEN=%04d NCCI=0x%x",
-		tag, CAPIMSG_COMMAND(data), CAPIMSG_SUBCOMMAND(data),
-		CAPIMSG_APPID(data), CAPIMSG_MSGID(data), l,
-		CAPIMSG_CONTROL(data));
-	l -= 12;
-	if (l <= 0)
-		return;
-	if (l > 64)
-		l = 64; /* arbitrary limit */
-	dbgline = kmalloc_array(3, l, GFP_ATOMIC);
-	if (!dbgline)
-		return;
-	for (i = 0; i < l; i++) {
-		dbgline[3 * i] = hex_asc_hi(data[12 + i]);
-		dbgline[3 * i + 1] = hex_asc_lo(data[12 + i]);
-		dbgline[3 * i + 2] = ' ';
-	}
-	dbgline[3 * l - 1] = '\0';
-	gig_dbg(level, "  %s", dbgline);
-	kfree(dbgline);
-	if (CAPIMSG_COMMAND(data) == CAPI_DATA_B3 &&
-	    (CAPIMSG_SUBCOMMAND(data) == CAPI_REQ ||
-	     CAPIMSG_SUBCOMMAND(data) == CAPI_IND)) {
-		l = CAPIMSG_DATALEN(data);
-		gig_dbg(level, "   DataLength=%d", l);
-		if (l <= 0 || !(gigaset_debuglevel & DEBUG_LLDATA))
-			return;
-		if (l > 64)
-			l = 64; /* arbitrary limit */
-		dbgline = kmalloc_array(3, l, GFP_ATOMIC);
-		if (!dbgline)
-			return;
-		data += CAPIMSG_LEN(data);
-		for (i = 0; i < l; i++) {
-			dbgline[3 * i] = hex_asc_hi(data[i]);
-			dbgline[3 * i + 1] = hex_asc_lo(data[i]);
-			dbgline[3 * i + 2] = ' ';
-		}
-		dbgline[3 * l - 1] = '\0';
-		gig_dbg(level, "  %s", dbgline);
-		kfree(dbgline);
-	}
-#endif
-}
-
-/*
- * format CAPI IE as string
- */
-
-#ifdef CONFIG_GIGASET_DEBUG
-static const char *format_ie(const char *ie)
-{
-	static char result[3 * MAX_FMT_IE_LEN];
-	int len, count;
-	char *pout = result;
-
-	if (!ie)
-		return "NULL";
-
-	count = len = ie[0];
-	if (count > MAX_FMT_IE_LEN)
-		count = MAX_FMT_IE_LEN - 1;
-	while (count--) {
-		*pout++ = hex_asc_hi(*++ie);
-		*pout++ = hex_asc_lo(*ie);
-		*pout++ = ' ';
-	}
-	if (len > MAX_FMT_IE_LEN) {
-		*pout++ = '.';
-		*pout++ = '.';
-		*pout++ = '.';
-	}
-	*--pout = 0;
-	return result;
-}
-#endif
-
-/*
- * emit DATA_B3_CONF message
- */
-static void send_data_b3_conf(struct cardstate *cs, struct capi_ctr *ctr,
-			      u16 appl, u16 msgid, int channel,
-			      u16 handle, u16 info)
-{
-	struct sk_buff *cskb;
-	u8 *msg;
-
-	cskb = alloc_skb(CAPI_DATA_B3_CONF_LEN, GFP_ATOMIC);
-	if (!cskb) {
-		dev_err(cs->dev, "%s: out of memory\n", __func__);
-		return;
-	}
-	/* frequent message, avoid _cmsg overhead */
-	msg = __skb_put(cskb, CAPI_DATA_B3_CONF_LEN);
-	CAPIMSG_SETLEN(msg, CAPI_DATA_B3_CONF_LEN);
-	CAPIMSG_SETAPPID(msg, appl);
-	CAPIMSG_SETCOMMAND(msg, CAPI_DATA_B3);
-	CAPIMSG_SETSUBCOMMAND(msg,  CAPI_CONF);
-	CAPIMSG_SETMSGID(msg, msgid);
-	CAPIMSG_SETCONTROLLER(msg, ctr->cnr);
-	CAPIMSG_SETPLCI_PART(msg, channel);
-	CAPIMSG_SETNCCI_PART(msg, 1);
-	CAPIMSG_SETHANDLE_CONF(msg, handle);
-	CAPIMSG_SETINFO_CONF(msg, info);
-
-	/* emit message */
-	dump_rawmsg(DEBUG_MCMD, __func__, msg);
-	capi_ctr_handle_message(ctr, appl, cskb);
-}
-
-
-/*
- * driver interface functions
- * ==========================
- */
-
-/**
- * gigaset_skb_sent() - acknowledge transmission of outgoing skb
- * @bcs:	B channel descriptor structure.
- * @skb:	sent data.
- *
- * Called by hardware module {bas,ser,usb}_gigaset when the data in a
- * skb has been successfully sent, for signalling completion to the LL.
- */
-void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *dskb)
-{
-	struct cardstate *cs = bcs->cs;
-	struct gigaset_capi_ctr *iif = cs->iif;
-	struct gigaset_capi_appl *ap = bcs->ap;
-	unsigned char *req = skb_mac_header(dskb);
-	u16 flags;
-
-	/* update statistics */
-	++bcs->trans_up;
-
-	if (!ap) {
-		gig_dbg(DEBUG_MCMD, "%s: application gone", __func__);
-		return;
-	}
-
-	/* don't send further B3 messages if disconnected */
-	if (bcs->apconnstate < APCONN_ACTIVE) {
-		gig_dbg(DEBUG_MCMD, "%s: disconnected", __func__);
-		return;
-	}
-
-	/*
-	 * send DATA_B3_CONF if "delivery confirmation" bit was set in request;
-	 * otherwise it has already been sent by do_data_b3_req()
-	 */
-	flags = CAPIMSG_FLAGS(req);
-	if (flags & CAPI_FLAGS_DELIVERY_CONFIRMATION)
-		send_data_b3_conf(cs, &iif->ctr, ap->id, CAPIMSG_MSGID(req),
-				  bcs->channel + 1, CAPIMSG_HANDLE_REQ(req),
-				  (flags & ~CAPI_FLAGS_DELIVERY_CONFIRMATION) ?
-				  CapiFlagsNotSupportedByProtocol :
-				  CAPI_NOERROR);
-}
-EXPORT_SYMBOL_GPL(gigaset_skb_sent);
-
-/**
- * gigaset_skb_rcvd() - pass received skb to LL
- * @bcs:	B channel descriptor structure.
- * @skb:	received data.
- *
- * Called by hardware module {bas,ser,usb}_gigaset when user data has
- * been successfully received, for passing to the LL.
- * Warning: skb must not be accessed anymore!
- */
-void gigaset_skb_rcvd(struct bc_state *bcs, struct sk_buff *skb)
-{
-	struct cardstate *cs = bcs->cs;
-	struct gigaset_capi_ctr *iif = cs->iif;
-	struct gigaset_capi_appl *ap = bcs->ap;
-	int len = skb->len;
-
-	/* update statistics */
-	bcs->trans_down++;
-
-	if (!ap) {
-		gig_dbg(DEBUG_MCMD, "%s: application gone", __func__);
-		dev_kfree_skb_any(skb);
-		return;
-	}
-
-	/* don't send further B3 messages if disconnected */
-	if (bcs->apconnstate < APCONN_ACTIVE) {
-		gig_dbg(DEBUG_MCMD, "%s: disconnected", __func__);
-		dev_kfree_skb_any(skb);
-		return;
-	}
-
-	/*
-	 * prepend DATA_B3_IND message to payload
-	 * Parameters: NCCI = 1, all others 0/unused
-	 * frequent message, avoid _cmsg overhead
-	 */
-	skb_push(skb, CAPI_DATA_B3_REQ_LEN);
-	CAPIMSG_SETLEN(skb->data, CAPI_DATA_B3_REQ_LEN);
-	CAPIMSG_SETAPPID(skb->data, ap->id);
-	CAPIMSG_SETCOMMAND(skb->data, CAPI_DATA_B3);
-	CAPIMSG_SETSUBCOMMAND(skb->data,  CAPI_IND);
-	CAPIMSG_SETMSGID(skb->data, ap->nextMessageNumber++);
-	CAPIMSG_SETCONTROLLER(skb->data, iif->ctr.cnr);
-	CAPIMSG_SETPLCI_PART(skb->data, bcs->channel + 1);
-	CAPIMSG_SETNCCI_PART(skb->data, 1);
-	/* Data parameter not used */
-	CAPIMSG_SETDATALEN(skb->data, len);
-	/* Data handle parameter not used */
-	CAPIMSG_SETFLAGS(skb->data, 0);
-	/* Data64 parameter not present */
-
-	/* emit message */
-	dump_rawmsg(DEBUG_MCMD, __func__, skb->data);
-	capi_ctr_handle_message(&iif->ctr, ap->id, skb);
-}
-EXPORT_SYMBOL_GPL(gigaset_skb_rcvd);
-
-/**
- * gigaset_isdn_rcv_err() - signal receive error
- * @bcs:	B channel descriptor structure.
- *
- * Called by hardware module {bas,ser,usb}_gigaset when a receive error
- * has occurred, for signalling to the LL.
- */
-void gigaset_isdn_rcv_err(struct bc_state *bcs)
-{
-	/* if currently ignoring packets, just count down */
-	if (bcs->ignore) {
-		bcs->ignore--;
-		return;
-	}
-
-	/* update statistics */
-	bcs->corrupted++;
-
-	/* ToDo: signal error -> LL */
-}
-EXPORT_SYMBOL_GPL(gigaset_isdn_rcv_err);
-
-/**
- * gigaset_isdn_icall() - signal incoming call
- * @at_state:	connection state structure.
- *
- * Called by main module at tasklet level to notify the LL that an incoming
- * call has been received. @at_state contains the parameters of the call.
- *
- * Return value: call disposition (ICALL_*)
- */
-int gigaset_isdn_icall(struct at_state_t *at_state)
-{
-	struct cardstate *cs = at_state->cs;
-	struct bc_state *bcs = at_state->bcs;
-	struct gigaset_capi_ctr *iif = cs->iif;
-	struct gigaset_capi_appl *ap;
-	u32 actCIPmask;
-	struct sk_buff *skb;
-	unsigned int msgsize;
-	unsigned long flags;
-	int i;
-
-	/*
-	 * ToDo: signal calls without a free B channel, too
-	 * (requires a u8 handle for the at_state structure that can
-	 * be stored in the PLCI and used in the CONNECT_RESP message
-	 * handler to retrieve it)
-	 */
-	if (!bcs)
-		return ICALL_IGNORE;
-
-	/* prepare CONNECT_IND message, using B channel number as PLCI */
-	capi_cmsg_header(&iif->hcmsg, 0, CAPI_CONNECT, CAPI_IND, 0,
-			 iif->ctr.cnr | ((bcs->channel + 1) << 8));
-
-	/* minimum size, all structs empty */
-	msgsize = CAPI_CONNECT_IND_BASELEN;
-
-	/* Bearer Capability (mandatory) */
-	if (at_state->str_var[STR_ZBC]) {
-		/* pass on BC from Gigaset */
-		if (encode_ie(at_state->str_var[STR_ZBC], iif->bc_buf,
-			      MAX_BC_OCTETS) < 0) {
-			dev_warn(cs->dev, "RING ignored - bad BC %s\n",
-				 at_state->str_var[STR_ZBC]);
-			return ICALL_IGNORE;
-		}
-
-		/* look up corresponding CIP value */
-		iif->hcmsg.CIPValue = 0;	/* default if nothing found */
-		for (i = 0; i < ARRAY_SIZE(cip2bchlc); i++)
-			if (cip2bchlc[i].bc != NULL &&
-			    cip2bchlc[i].hlc == NULL &&
-			    !strcmp(cip2bchlc[i].bc,
-				    at_state->str_var[STR_ZBC])) {
-				iif->hcmsg.CIPValue = i;
-				break;
-			}
-	} else {
-		/* no BC (internal call): assume CIP 1 (speech, A-law) */
-		iif->hcmsg.CIPValue = 1;
-		encode_ie(cip2bchlc[1].bc, iif->bc_buf, MAX_BC_OCTETS);
-	}
-	iif->hcmsg.BC = iif->bc_buf;
-	msgsize += iif->hcmsg.BC[0];
-
-	/* High Layer Compatibility (optional) */
-	if (at_state->str_var[STR_ZHLC]) {
-		/* pass on HLC from Gigaset */
-		if (encode_ie(at_state->str_var[STR_ZHLC], iif->hlc_buf,
-			      MAX_HLC_OCTETS) < 0) {
-			dev_warn(cs->dev, "RING ignored - bad HLC %s\n",
-				 at_state->str_var[STR_ZHLC]);
-			return ICALL_IGNORE;
-		}
-		iif->hcmsg.HLC = iif->hlc_buf;
-		msgsize += iif->hcmsg.HLC[0];
-
-		/* look up corresponding CIP value */
-		/* keep BC based CIP value if none found */
-		if (at_state->str_var[STR_ZBC])
-			for (i = 0; i < ARRAY_SIZE(cip2bchlc); i++)
-				if (cip2bchlc[i].hlc != NULL &&
-				    !strcmp(cip2bchlc[i].hlc,
-					    at_state->str_var[STR_ZHLC]) &&
-				    !strcmp(cip2bchlc[i].bc,
-					    at_state->str_var[STR_ZBC])) {
-					iif->hcmsg.CIPValue = i;
-					break;
-				}
-	}
-
-	/* Called Party Number (optional) */
-	if (at_state->str_var[STR_ZCPN]) {
-		i = strlen(at_state->str_var[STR_ZCPN]);
-		if (i > MAX_NUMBER_DIGITS) {
-			dev_warn(cs->dev, "RING ignored - bad number %s\n",
-				 at_state->str_var[STR_ZBC]);
-			return ICALL_IGNORE;
-		}
-		iif->cdpty_buf[0] = i + 1;
-		iif->cdpty_buf[1] = 0x80; /* type / numbering plan unknown */
-		memcpy(iif->cdpty_buf + 2, at_state->str_var[STR_ZCPN], i);
-		iif->hcmsg.CalledPartyNumber = iif->cdpty_buf;
-		msgsize += iif->hcmsg.CalledPartyNumber[0];
-	}
-
-	/* Calling Party Number (optional) */
-	if (at_state->str_var[STR_NMBR]) {
-		i = strlen(at_state->str_var[STR_NMBR]);
-		if (i > MAX_NUMBER_DIGITS) {
-			dev_warn(cs->dev, "RING ignored - bad number %s\n",
-				 at_state->str_var[STR_ZBC]);
-			return ICALL_IGNORE;
-		}
-		iif->cgpty_buf[0] = i + 2;
-		iif->cgpty_buf[1] = 0x00; /* type / numbering plan unknown */
-		iif->cgpty_buf[2] = 0x80; /* pres. allowed, not screened */
-		memcpy(iif->cgpty_buf + 3, at_state->str_var[STR_NMBR], i);
-		iif->hcmsg.CallingPartyNumber = iif->cgpty_buf;
-		msgsize += iif->hcmsg.CallingPartyNumber[0];
-	}
-
-	/* remaining parameters (not supported, always left NULL):
-	 * - CalledPartySubaddress
-	 * - CallingPartySubaddress
-	 * - AdditionalInfo
-	 *   - BChannelinformation
-	 *   - Keypadfacility
-	 *   - Useruserdata
-	 *   - Facilitydataarray
-	 */
-
-	gig_dbg(DEBUG_CMD, "icall: PLCI %x CIP %d BC %s",
-		iif->hcmsg.adr.adrPLCI, iif->hcmsg.CIPValue,
-		format_ie(iif->hcmsg.BC));
-	gig_dbg(DEBUG_CMD, "icall: HLC %s",
-		format_ie(iif->hcmsg.HLC));
-	gig_dbg(DEBUG_CMD, "icall: CgPty %s",
-		format_ie(iif->hcmsg.CallingPartyNumber));
-	gig_dbg(DEBUG_CMD, "icall: CdPty %s",
-		format_ie(iif->hcmsg.CalledPartyNumber));
-
-	/* scan application list for matching listeners */
-	spin_lock_irqsave(&bcs->aplock, flags);
-	if (bcs->ap != NULL || bcs->apconnstate != APCONN_NONE) {
-		dev_warn(cs->dev, "%s: channel not properly cleared (%p/%d)\n",
-			 __func__, bcs->ap, bcs->apconnstate);
-		bcs->ap = NULL;
-		bcs->apconnstate = APCONN_NONE;
-	}
-	spin_unlock_irqrestore(&bcs->aplock, flags);
-	actCIPmask = 1 | (1 << iif->hcmsg.CIPValue);
-	list_for_each_entry(ap, &iif->appls, ctrlist)
-		if (actCIPmask & ap->listenCIPmask) {
-			/* build CONNECT_IND message for this application */
-			iif->hcmsg.ApplId = ap->id;
-			iif->hcmsg.Messagenumber = ap->nextMessageNumber++;
-
-			skb = alloc_skb(msgsize, GFP_ATOMIC);
-			if (!skb) {
-				dev_err(cs->dev, "%s: out of memory\n",
-					__func__);
-				break;
-			}
-			if (capi_cmsg2message(&iif->hcmsg,
-					      __skb_put(skb, msgsize))) {
-				dev_err(cs->dev, "%s: message parser failure\n",
-					__func__);
-				dev_kfree_skb_any(skb);
-				break;
-			}
-			dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg);
-
-			/* add to listeners on this B channel, update state */
-			spin_lock_irqsave(&bcs->aplock, flags);
-			ap->bcnext = bcs->ap;
-			bcs->ap = ap;
-			bcs->chstate |= CHS_NOTIFY_LL;
-			bcs->apconnstate = APCONN_SETUP;
-			spin_unlock_irqrestore(&bcs->aplock, flags);
-
-			/* emit message */
-			capi_ctr_handle_message(&iif->ctr, ap->id, skb);
-		}
-
-	/*
-	 * Return "accept" if any listeners.
-	 * Gigaset will send ALERTING.
-	 * There doesn't seem to be a way to avoid this.
-	 */
-	return bcs->ap ? ICALL_ACCEPT : ICALL_IGNORE;
-}
-
-/*
- * send a DISCONNECT_IND message to an application
- * does not sleep, clobbers the controller's hcmsg structure
- */
-static void send_disconnect_ind(struct bc_state *bcs,
-				struct gigaset_capi_appl *ap, u16 reason)
-{
-	struct cardstate *cs = bcs->cs;
-	struct gigaset_capi_ctr *iif = cs->iif;
-	struct sk_buff *skb;
-
-	if (bcs->apconnstate == APCONN_NONE)
-		return;
-
-	capi_cmsg_header(&iif->hcmsg, ap->id, CAPI_DISCONNECT, CAPI_IND,
-			 ap->nextMessageNumber++,
-			 iif->ctr.cnr | ((bcs->channel + 1) << 8));
-	iif->hcmsg.Reason = reason;
-	skb = alloc_skb(CAPI_DISCONNECT_IND_LEN, GFP_ATOMIC);
-	if (!skb) {
-		dev_err(cs->dev, "%s: out of memory\n", __func__);
-		return;
-	}
-	if (capi_cmsg2message(&iif->hcmsg,
-			      __skb_put(skb, CAPI_DISCONNECT_IND_LEN))) {
-		dev_err(cs->dev, "%s: message parser failure\n", __func__);
-		dev_kfree_skb_any(skb);
-		return;
-	}
-	dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg);
-	capi_ctr_handle_message(&iif->ctr, ap->id, skb);
-}
-
-/*
- * send a DISCONNECT_B3_IND message to an application
- * Parameters: NCCI = 1, NCPI empty, Reason_B3 = 0
- * does not sleep, clobbers the controller's hcmsg structure
- */
-static void send_disconnect_b3_ind(struct bc_state *bcs,
-				   struct gigaset_capi_appl *ap)
-{
-	struct cardstate *cs = bcs->cs;
-	struct gigaset_capi_ctr *iif = cs->iif;
-	struct sk_buff *skb;
-
-	/* nothing to do if no logical connection active */
-	if (bcs->apconnstate < APCONN_ACTIVE)
-		return;
-	bcs->apconnstate = APCONN_SETUP;
-
-	capi_cmsg_header(&iif->hcmsg, ap->id, CAPI_DISCONNECT_B3, CAPI_IND,
-			 ap->nextMessageNumber++,
-			 iif->ctr.cnr | ((bcs->channel + 1) << 8) | (1 << 16));
-	skb = alloc_skb(CAPI_DISCONNECT_B3_IND_BASELEN, GFP_ATOMIC);
-	if (!skb) {
-		dev_err(cs->dev, "%s: out of memory\n", __func__);
-		return;
-	}
-	if (capi_cmsg2message(&iif->hcmsg,
-			  __skb_put(skb, CAPI_DISCONNECT_B3_IND_BASELEN))) {
-		dev_err(cs->dev, "%s: message parser failure\n", __func__);
-		dev_kfree_skb_any(skb);
-		return;
-	}
-	dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg);
-	capi_ctr_handle_message(&iif->ctr, ap->id, skb);
-}
-
-/**
- * gigaset_isdn_connD() - signal D channel connect
- * @bcs:	B channel descriptor structure.
- *
- * Called by main module at tasklet level to notify the LL that the D channel
- * connection has been established.
- */
-void gigaset_isdn_connD(struct bc_state *bcs)
-{
-	struct cardstate *cs = bcs->cs;
-	struct gigaset_capi_ctr *iif = cs->iif;
-	struct gigaset_capi_appl *ap;
-	struct sk_buff *skb;
-	unsigned int msgsize;
-	unsigned long flags;
-
-	spin_lock_irqsave(&bcs->aplock, flags);
-	ap = bcs->ap;
-	if (!ap) {
-		spin_unlock_irqrestore(&bcs->aplock, flags);
-		gig_dbg(DEBUG_CMD, "%s: application gone", __func__);
-		return;
-	}
-	if (bcs->apconnstate == APCONN_NONE) {
-		spin_unlock_irqrestore(&bcs->aplock, flags);
-		dev_warn(cs->dev, "%s: application %u not connected\n",
-			 __func__, ap->id);
-		return;
-	}
-	spin_unlock_irqrestore(&bcs->aplock, flags);
-	while (ap->bcnext) {
-		/* this should never happen */
-		dev_warn(cs->dev, "%s: dropping extra application %u\n",
-			 __func__, ap->bcnext->id);
-		send_disconnect_ind(bcs, ap->bcnext,
-				    CapiCallGivenToOtherApplication);
-		ap->bcnext = ap->bcnext->bcnext;
-	}
-
-	/* prepare CONNECT_ACTIVE_IND message
-	 * Note: LLC not supported by device
-	 */
-	capi_cmsg_header(&iif->hcmsg, ap->id, CAPI_CONNECT_ACTIVE, CAPI_IND,
-			 ap->nextMessageNumber++,
-			 iif->ctr.cnr | ((bcs->channel + 1) << 8));
-
-	/* minimum size, all structs empty */
-	msgsize = CAPI_CONNECT_ACTIVE_IND_BASELEN;
-
-	/* ToDo: set parameter: Connected number
-	 * (requires ev-layer state machine extension to collect
-	 * ZCON device reply)
-	 */
-
-	/* build and emit CONNECT_ACTIVE_IND message */
-	skb = alloc_skb(msgsize, GFP_ATOMIC);
-	if (!skb) {
-		dev_err(cs->dev, "%s: out of memory\n", __func__);
-		return;
-	}
-	if (capi_cmsg2message(&iif->hcmsg, __skb_put(skb, msgsize))) {
-		dev_err(cs->dev, "%s: message parser failure\n", __func__);
-		dev_kfree_skb_any(skb);
-		return;
-	}
-	dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg);
-	capi_ctr_handle_message(&iif->ctr, ap->id, skb);
-}
-
-/**
- * gigaset_isdn_hupD() - signal D channel hangup
- * @bcs:	B channel descriptor structure.
- *
- * Called by main module at tasklet level to notify the LL that the D channel
- * connection has been shut down.
- */
-void gigaset_isdn_hupD(struct bc_state *bcs)
-{
-	struct gigaset_capi_appl *ap;
-	unsigned long flags;
-
-	/*
-	 * ToDo: pass on reason code reported by device
-	 * (requires ev-layer state machine extension to collect
-	 * ZCAU device reply)
-	 */
-	spin_lock_irqsave(&bcs->aplock, flags);
-	while (bcs->ap != NULL) {
-		ap = bcs->ap;
-		bcs->ap = ap->bcnext;
-		spin_unlock_irqrestore(&bcs->aplock, flags);
-		send_disconnect_b3_ind(bcs, ap);
-		send_disconnect_ind(bcs, ap, 0);
-		spin_lock_irqsave(&bcs->aplock, flags);
-	}
-	bcs->apconnstate = APCONN_NONE;
-	spin_unlock_irqrestore(&bcs->aplock, flags);
-}
-
-/**
- * gigaset_isdn_connB() - signal B channel connect
- * @bcs:	B channel descriptor structure.
- *
- * Called by main module at tasklet level to notify the LL that the B channel
- * connection has been established.
- */
-void gigaset_isdn_connB(struct bc_state *bcs)
-{
-	struct cardstate *cs = bcs->cs;
-	struct gigaset_capi_ctr *iif = cs->iif;
-	struct gigaset_capi_appl *ap;
-	struct sk_buff *skb;
-	unsigned long flags;
-	unsigned int msgsize;
-	u8 command;
-
-	spin_lock_irqsave(&bcs->aplock, flags);
-	ap = bcs->ap;
-	if (!ap) {
-		spin_unlock_irqrestore(&bcs->aplock, flags);
-		gig_dbg(DEBUG_CMD, "%s: application gone", __func__);
-		return;
-	}
-	if (!bcs->apconnstate) {
-		spin_unlock_irqrestore(&bcs->aplock, flags);
-		dev_warn(cs->dev, "%s: application %u not connected\n",
-			 __func__, ap->id);
-		return;
-	}
-
-	/*
-	 * emit CONNECT_B3_ACTIVE_IND if we already got CONNECT_B3_REQ;
-	 * otherwise we have to emit CONNECT_B3_IND first, and follow up with
-	 * CONNECT_B3_ACTIVE_IND in reply to CONNECT_B3_RESP
-	 * Parameters in both cases always: NCCI = 1, NCPI empty
-	 */
-	if (bcs->apconnstate >= APCONN_ACTIVE) {
-		command = CAPI_CONNECT_B3_ACTIVE;
-		msgsize = CAPI_CONNECT_B3_ACTIVE_IND_BASELEN;
-	} else {
-		command = CAPI_CONNECT_B3;
-		msgsize = CAPI_CONNECT_B3_IND_BASELEN;
-	}
-	bcs->apconnstate = APCONN_ACTIVE;
-
-	spin_unlock_irqrestore(&bcs->aplock, flags);
-
-	while (ap->bcnext) {
-		/* this should never happen */
-		dev_warn(cs->dev, "%s: dropping extra application %u\n",
-			 __func__, ap->bcnext->id);
-		send_disconnect_ind(bcs, ap->bcnext,
-				    CapiCallGivenToOtherApplication);
-		ap->bcnext = ap->bcnext->bcnext;
-	}
-
-	capi_cmsg_header(&iif->hcmsg, ap->id, command, CAPI_IND,
-			 ap->nextMessageNumber++,
-			 iif->ctr.cnr | ((bcs->channel + 1) << 8) | (1 << 16));
-	skb = alloc_skb(msgsize, GFP_ATOMIC);
-	if (!skb) {
-		dev_err(cs->dev, "%s: out of memory\n", __func__);
-		return;
-	}
-	if (capi_cmsg2message(&iif->hcmsg, __skb_put(skb, msgsize))) {
-		dev_err(cs->dev, "%s: message parser failure\n", __func__);
-		dev_kfree_skb_any(skb);
-		return;
-	}
-	dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg);
-	capi_ctr_handle_message(&iif->ctr, ap->id, skb);
-}
-
-/**
- * gigaset_isdn_hupB() - signal B channel hangup
- * @bcs:	B channel descriptor structure.
- *
- * Called by main module to notify the LL that the B channel connection has
- * been shut down.
- */
-void gigaset_isdn_hupB(struct bc_state *bcs)
-{
-	struct gigaset_capi_appl *ap = bcs->ap;
-
-	/* ToDo: assure order of DISCONNECT_B3_IND and DISCONNECT_IND ? */
-
-	if (!ap) {
-		gig_dbg(DEBUG_CMD, "%s: application gone", __func__);
-		return;
-	}
-
-	send_disconnect_b3_ind(bcs, ap);
-}
-
-/**
- * gigaset_isdn_start() - signal device availability
- * @cs:		device descriptor structure.
- *
- * Called by main module to notify the LL that the device is available for
- * use.
- */
-void gigaset_isdn_start(struct cardstate *cs)
-{
-	struct gigaset_capi_ctr *iif = cs->iif;
-
-	/* fill profile data: manufacturer name */
-	strcpy(iif->ctr.manu, "Siemens");
-	/* CAPI and device version */
-	iif->ctr.version.majorversion = 2;		/* CAPI 2.0 */
-	iif->ctr.version.minorversion = 0;
-	/* ToDo: check/assert cs->gotfwver? */
-	iif->ctr.version.majormanuversion = cs->fwver[0];
-	iif->ctr.version.minormanuversion = cs->fwver[1];
-	/* number of B channels supported */
-	iif->ctr.profile.nbchannel = cs->channels;
-	/* global options: internal controller, supplementary services */
-	iif->ctr.profile.goptions = 0x11;
-	/* B1 protocols: 64 kbit/s HDLC or transparent */
-	iif->ctr.profile.support1 =  0x03;
-	/* B2 protocols: transparent only */
-	/* ToDo: X.75 SLP ? */
-	iif->ctr.profile.support2 =  0x02;
-	/* B3 protocols: transparent only */
-	iif->ctr.profile.support3 =  0x01;
-	/* no serial number */
-	strcpy(iif->ctr.serial, "0");
-	capi_ctr_ready(&iif->ctr);
-}
-
-/**
- * gigaset_isdn_stop() - signal device unavailability
- * @cs:		device descriptor structure.
- *
- * Called by main module to notify the LL that the device is no longer
- * available for use.
- */
-void gigaset_isdn_stop(struct cardstate *cs)
-{
-	struct gigaset_capi_ctr *iif = cs->iif;
-	capi_ctr_down(&iif->ctr);
-}
-
-/*
- * kernel CAPI callback methods
- * ============================
- */
-
-/*
- * register CAPI application
- */
-static void gigaset_register_appl(struct capi_ctr *ctr, u16 appl,
-				  capi_register_params *rp)
-{
-	struct gigaset_capi_ctr *iif
-		= container_of(ctr, struct gigaset_capi_ctr, ctr);
-	struct cardstate *cs = ctr->driverdata;
-	struct gigaset_capi_appl *ap;
-
-	gig_dbg(DEBUG_CMD, "%s [%u] l3cnt=%u blkcnt=%u blklen=%u",
-		__func__, appl, rp->level3cnt, rp->datablkcnt, rp->datablklen);
-
-	list_for_each_entry(ap, &iif->appls, ctrlist)
-		if (ap->id == appl) {
-			dev_notice(cs->dev,
-				   "application %u already registered\n", appl);
-			return;
-		}
-
-	ap = kzalloc(sizeof(*ap), GFP_KERNEL);
-	if (!ap) {
-		dev_err(cs->dev, "%s: out of memory\n", __func__);
-		return;
-	}
-	ap->id = appl;
-	ap->rp = *rp;
-
-	list_add(&ap->ctrlist, &iif->appls);
-	dev_info(cs->dev, "application %u registered\n", ap->id);
-}
-
-/*
- * remove CAPI application from channel
- * helper function to keep indentation levels down and stay in 80 columns
- */
-
-static inline void remove_appl_from_channel(struct bc_state *bcs,
-					    struct gigaset_capi_appl *ap)
-{
-	struct cardstate *cs = bcs->cs;
-	struct gigaset_capi_appl *bcap;
-	unsigned long flags;
-	int prevconnstate;
-
-	spin_lock_irqsave(&bcs->aplock, flags);
-	bcap = bcs->ap;
-	if (bcap == NULL) {
-		spin_unlock_irqrestore(&bcs->aplock, flags);
-		return;
-	}
-
-	/* check first application on channel */
-	if (bcap == ap) {
-		bcs->ap = ap->bcnext;
-		if (bcs->ap != NULL) {
-			spin_unlock_irqrestore(&bcs->aplock, flags);
-			return;
-		}
-
-		/* none left, clear channel state */
-		prevconnstate = bcs->apconnstate;
-		bcs->apconnstate = APCONN_NONE;
-		spin_unlock_irqrestore(&bcs->aplock, flags);
-
-		if (prevconnstate == APCONN_ACTIVE) {
-			dev_notice(cs->dev, "%s: hanging up channel %u\n",
-				   __func__, bcs->channel);
-			gigaset_add_event(cs, &bcs->at_state,
-					  EV_HUP, NULL, 0, NULL);
-			gigaset_schedule_event(cs);
-		}
-		return;
-	}
-
-	/* check remaining list */
-	do {
-		if (bcap->bcnext == ap) {
-			bcap->bcnext = bcap->bcnext->bcnext;
-			spin_unlock_irqrestore(&bcs->aplock, flags);
-			return;
-		}
-		bcap = bcap->bcnext;
-	} while (bcap != NULL);
-	spin_unlock_irqrestore(&bcs->aplock, flags);
-}
-
-/*
- * release CAPI application
- */
-static void gigaset_release_appl(struct capi_ctr *ctr, u16 appl)
-{
-	struct gigaset_capi_ctr *iif
-		= container_of(ctr, struct gigaset_capi_ctr, ctr);
-	struct cardstate *cs = iif->ctr.driverdata;
-	struct gigaset_capi_appl *ap, *tmp;
-	unsigned ch;
-
-	gig_dbg(DEBUG_CMD, "%s [%u]", __func__, appl);
-
-	list_for_each_entry_safe(ap, tmp, &iif->appls, ctrlist)
-		if (ap->id == appl) {
-			/* remove from any channels */
-			for (ch = 0; ch < cs->channels; ch++)
-				remove_appl_from_channel(&cs->bcs[ch], ap);
-
-			/* remove from registration list */
-			list_del(&ap->ctrlist);
-			kfree(ap);
-			dev_info(cs->dev, "application %u released\n", appl);
-		}
-}
-
-/*
- * =====================================================================
- * outgoing CAPI message handler
- * =====================================================================
- */
-
-/*
- * helper function: emit reply message with given Info value
- */
-static void send_conf(struct gigaset_capi_ctr *iif,
-		      struct gigaset_capi_appl *ap,
-		      struct sk_buff *skb,
-		      u16 info)
-{
-	struct cardstate *cs = iif->ctr.driverdata;
-
-	/*
-	 * _CONF replies always only have NCCI and Info parameters
-	 * so they'll fit into the _REQ message skb
-	 */
-	capi_cmsg_answer(&iif->acmsg);
-	iif->acmsg.Info = info;
-	if (capi_cmsg2message(&iif->acmsg, skb->data)) {
-		dev_err(cs->dev, "%s: message parser failure\n", __func__);
-		dev_kfree_skb_any(skb);
-		return;
-	}
-	__skb_trim(skb, CAPI_STDCONF_LEN);
-	dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
-	capi_ctr_handle_message(&iif->ctr, ap->id, skb);
-}
-
-/*
- * process FACILITY_REQ message
- */
-static void do_facility_req(struct gigaset_capi_ctr *iif,
-			    struct gigaset_capi_appl *ap,
-			    struct sk_buff *skb)
-{
-	struct cardstate *cs = iif->ctr.driverdata;
-	_cmsg *cmsg = &iif->acmsg;
-	struct sk_buff *cskb;
-	u8 *pparam;
-	unsigned int msgsize = CAPI_FACILITY_CONF_BASELEN;
-	u16 function, info;
-	static u8 confparam[10];	/* max. 9 octets + length byte */
-
-	/* decode message */
-	if (capi_message2cmsg(cmsg, skb->data)) {
-		dev_err(cs->dev, "%s: message parser failure\n", __func__);
-		dev_kfree_skb_any(skb);
-		return;
-	}
-	dump_cmsg(DEBUG_CMD, __func__, cmsg);
-
-	/*
-	 * Facility Request Parameter is not decoded by capi_message2cmsg()
-	 * encoding depends on Facility Selector
-	 */
-	switch (cmsg->FacilitySelector) {
-	case CAPI_FACILITY_DTMF:	/* ToDo */
-		info = CapiFacilityNotSupported;
-		confparam[0] = 2;	/* length */
-		/* DTMF information: Unknown DTMF request */
-		capimsg_setu16(confparam, 1, 2);
-		break;
-
-	case CAPI_FACILITY_V42BIS:	/* not supported */
-		info = CapiFacilityNotSupported;
-		confparam[0] = 2;	/* length */
-		/* V.42 bis information: not available */
-		capimsg_setu16(confparam, 1, 1);
-		break;
-
-	case CAPI_FACILITY_SUPPSVC:
-		/* decode Function parameter */
-		pparam = cmsg->FacilityRequestParameter;
-		if (pparam == NULL || pparam[0] < 2) {
-			dev_notice(cs->dev, "%s: %s missing\n", "FACILITY_REQ",
-				   "Facility Request Parameter");
-			send_conf(iif, ap, skb, CapiIllMessageParmCoding);
-			return;
-		}
-		function = CAPIMSG_U16(pparam, 1);
-		switch (function) {
-		case CAPI_SUPPSVC_GETSUPPORTED:
-			info = CapiSuccess;
-			/* Supplementary Service specific parameter */
-			confparam[3] = 6;	/* length */
-			/* Supplementary services info: Success */
-			capimsg_setu16(confparam, 4, CapiSuccess);
-			/* Supported Services: none */
-			capimsg_setu32(confparam, 6, 0);
-			break;
-		case CAPI_SUPPSVC_LISTEN:
-			if (pparam[0] < 7 || pparam[3] < 4) {
-				dev_notice(cs->dev, "%s: %s missing\n",
-					   "FACILITY_REQ", "Notification Mask");
-				send_conf(iif, ap, skb,
-					  CapiIllMessageParmCoding);
-				return;
-			}
-			if (CAPIMSG_U32(pparam, 4) != 0) {
-				dev_notice(cs->dev,
-					   "%s: unsupported supplementary service notification mask 0x%x\n",
-					   "FACILITY_REQ", CAPIMSG_U32(pparam, 4));
-				info = CapiFacilitySpecificFunctionNotSupported;
-				confparam[3] = 2;	/* length */
-				capimsg_setu16(confparam, 4,
-					       CapiSupplementaryServiceNotSupported);
-				break;
-			}
-			info = CapiSuccess;
-			confparam[3] = 2;	/* length */
-			capimsg_setu16(confparam, 4, CapiSuccess);
-			break;
-
-		/* ToDo: add supported services */
-
-		default:
-			dev_notice(cs->dev,
-				   "%s: unsupported supplementary service function 0x%04x\n",
-				   "FACILITY_REQ", function);
-			info = CapiFacilitySpecificFunctionNotSupported;
-			/* Supplementary Service specific parameter */
-			confparam[3] = 2;	/* length */
-			/* Supplementary services info: not supported */
-			capimsg_setu16(confparam, 4,
-				       CapiSupplementaryServiceNotSupported);
-		}
-
-		/* Facility confirmation parameter */
-		confparam[0] = confparam[3] + 3;	/* total length */
-		/* Function: copy from _REQ message */
-		capimsg_setu16(confparam, 1, function);
-		/* Supplementary Service specific parameter already set above */
-		break;
-
-	case CAPI_FACILITY_WAKEUP:	/* ToDo */
-		info = CapiFacilityNotSupported;
-		confparam[0] = 2;	/* length */
-		/* Number of accepted awake request parameters: 0 */
-		capimsg_setu16(confparam, 1, 0);
-		break;
-
-	default:
-		info = CapiFacilityNotSupported;
-		confparam[0] = 0;	/* empty struct */
-	}
-
-	/* send FACILITY_CONF with given Info and confirmation parameter */
-	dev_kfree_skb_any(skb);
-	capi_cmsg_answer(cmsg);
-	cmsg->Info = info;
-	cmsg->FacilityConfirmationParameter = confparam;
-	msgsize += confparam[0];	/* length */
-	cskb = alloc_skb(msgsize, GFP_ATOMIC);
-	if (!cskb) {
-		dev_err(cs->dev, "%s: out of memory\n", __func__);
-		return;
-	}
-	if (capi_cmsg2message(cmsg, __skb_put(cskb, msgsize))) {
-		dev_err(cs->dev, "%s: message parser failure\n", __func__);
-		dev_kfree_skb_any(cskb);
-		return;
-	}
-	dump_cmsg(DEBUG_CMD, __func__, cmsg);
-	capi_ctr_handle_message(&iif->ctr, ap->id, cskb);
-}
-
-
-/*
- * process LISTEN_REQ message
- * just store the masks in the application data structure
- */
-static void do_listen_req(struct gigaset_capi_ctr *iif,
-			  struct gigaset_capi_appl *ap,
-			  struct sk_buff *skb)
-{
-	struct cardstate *cs = iif->ctr.driverdata;
-
-	/* decode message */
-	if (capi_message2cmsg(&iif->acmsg, skb->data)) {
-		dev_err(cs->dev, "%s: message parser failure\n", __func__);
-		dev_kfree_skb_any(skb);
-		return;
-	}
-	dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
-
-	/* store listening parameters */
-	ap->listenInfoMask = iif->acmsg.InfoMask;
-	ap->listenCIPmask = iif->acmsg.CIPmask;
-	send_conf(iif, ap, skb, CapiSuccess);
-}
-
-/*
- * process ALERT_REQ message
- * nothing to do, Gigaset always alerts anyway
- */
-static void do_alert_req(struct gigaset_capi_ctr *iif,
-			 struct gigaset_capi_appl *ap,
-			 struct sk_buff *skb)
-{
-	struct cardstate *cs = iif->ctr.driverdata;
-
-	/* decode message */
-	if (capi_message2cmsg(&iif->acmsg, skb->data)) {
-		dev_err(cs->dev, "%s: message parser failure\n", __func__);
-		dev_kfree_skb_any(skb);
-		return;
-	}
-	dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
-	send_conf(iif, ap, skb, CapiAlertAlreadySent);
-}
-
-/*
- * process CONNECT_REQ message
- * allocate a B channel, prepare dial commands, queue a DIAL event,
- * emit CONNECT_CONF reply
- */
-static void do_connect_req(struct gigaset_capi_ctr *iif,
-			   struct gigaset_capi_appl *ap,
-			   struct sk_buff *skb)
-{
-	struct cardstate *cs = iif->ctr.driverdata;
-	_cmsg *cmsg = &iif->acmsg;
-	struct bc_state *bcs;
-	char **commands;
-	char *s;
-	u8 *pp;
-	unsigned long flags;
-	int i, l, lbc, lhlc;
-	u16 info;
-
-	/* decode message */
-	if (capi_message2cmsg(cmsg, skb->data)) {
-		dev_err(cs->dev, "%s: message parser failure\n", __func__);
-		dev_kfree_skb_any(skb);
-		return;
-	}
-	dump_cmsg(DEBUG_CMD, __func__, cmsg);
-
-	/* get free B channel & construct PLCI */
-	bcs = gigaset_get_free_channel(cs);
-	if (!bcs) {
-		dev_notice(cs->dev, "%s: no B channel available\n",
-			   "CONNECT_REQ");
-		send_conf(iif, ap, skb, CapiNoPlciAvailable);
-		return;
-	}
-	spin_lock_irqsave(&bcs->aplock, flags);
-	if (bcs->ap != NULL || bcs->apconnstate != APCONN_NONE)
-		dev_warn(cs->dev, "%s: channel not properly cleared (%p/%d)\n",
-			 __func__, bcs->ap, bcs->apconnstate);
-	ap->bcnext = NULL;
-	bcs->ap = ap;
-	bcs->apconnstate = APCONN_SETUP;
-	spin_unlock_irqrestore(&bcs->aplock, flags);
-
-	bcs->rx_bufsize = ap->rp.datablklen;
-	dev_kfree_skb(bcs->rx_skb);
-	gigaset_new_rx_skb(bcs);
-	cmsg->adr.adrPLCI |= (bcs->channel + 1) << 8;
-
-	/* build command table */
-	commands = kcalloc(AT_NUM, sizeof(*commands), GFP_KERNEL);
-	if (!commands)
-		goto oom;
-
-	/* encode parameter: Called party number */
-	pp = cmsg->CalledPartyNumber;
-	if (pp == NULL || *pp == 0) {
-		dev_notice(cs->dev, "%s: %s missing\n",
-			   "CONNECT_REQ", "Called party number");
-		info = CapiIllMessageParmCoding;
-		goto error;
-	}
-	l = *pp++;
-	/* check type of number/numbering plan byte */
-	switch (*pp) {
-	case 0x80:	/* unknown type / unknown numbering plan */
-	case 0x81:	/* unknown type / ISDN/Telephony numbering plan */
-		break;
-	default:	/* others: warn about potential misinterpretation */
-		dev_notice(cs->dev, "%s: %s type/plan 0x%02x unsupported\n",
-			   "CONNECT_REQ", "Called party number", *pp);
-	}
-	pp++;
-	l--;
-	/* translate "**" internal call prefix to CTP value */
-	if (l >= 2 && pp[0] == '*' && pp[1] == '*') {
-		s = "^SCTP=0\r";
-		pp += 2;
-		l -= 2;
-	} else {
-		s = "^SCTP=1\r";
-	}
-	commands[AT_TYPE] = kstrdup(s, GFP_KERNEL);
-	if (!commands[AT_TYPE])
-		goto oom;
-	commands[AT_DIAL] = kmalloc(l + 3, GFP_KERNEL);
-	if (!commands[AT_DIAL])
-		goto oom;
-	snprintf(commands[AT_DIAL], l + 3, "D%.*s\r", l, pp);
-
-	/* encode parameter: Calling party number */
-	pp = cmsg->CallingPartyNumber;
-	if (pp != NULL && *pp > 0) {
-		l = *pp++;
-
-		/* check type of number/numbering plan byte */
-		/* ToDo: allow for/handle Ext=1? */
-		switch (*pp) {
-		case 0x00:	/* unknown type / unknown numbering plan */
-		case 0x01:	/* unknown type / ISDN/Telephony num. plan */
-			break;
-		default:
-			dev_notice(cs->dev,
-				   "%s: %s type/plan 0x%02x unsupported\n",
-				   "CONNECT_REQ", "Calling party number", *pp);
-		}
-		pp++;
-		l--;
-
-		/* check presentation indicator */
-		if (!l) {
-			dev_notice(cs->dev, "%s: %s IE truncated\n",
-				   "CONNECT_REQ", "Calling party number");
-			info = CapiIllMessageParmCoding;
-			goto error;
-		}
-		switch (*pp & 0xfc) { /* ignore Screening indicator */
-		case 0x80:	/* Presentation allowed */
-			s = "^SCLIP=1\r";
-			break;
-		case 0xa0:	/* Presentation restricted */
-			s = "^SCLIP=0\r";
-			break;
-		default:
-			dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
-				   "CONNECT_REQ",
-				   "Presentation/Screening indicator",
-				   *pp);
-			s = "^SCLIP=1\r";
-		}
-		commands[AT_CLIP] = kstrdup(s, GFP_KERNEL);
-		if (!commands[AT_CLIP])
-			goto oom;
-		pp++;
-		l--;
-
-		if (l) {
-			/* number */
-			commands[AT_MSN] = kmalloc(l + 8, GFP_KERNEL);
-			if (!commands[AT_MSN])
-				goto oom;
-			snprintf(commands[AT_MSN], l + 8, "^SMSN=%*s\r", l, pp);
-		}
-	}
-
-	/* check parameter: CIP Value */
-	if (cmsg->CIPValue >= ARRAY_SIZE(cip2bchlc) ||
-	    (cmsg->CIPValue > 0 && cip2bchlc[cmsg->CIPValue].bc == NULL)) {
-		dev_notice(cs->dev, "%s: unknown CIP value %d\n",
-			   "CONNECT_REQ", cmsg->CIPValue);
-		info = CapiCipValueUnknown;
-		goto error;
-	}
-
-	/*
-	 * check/encode parameters: BC & HLC
-	 * must be encoded together as device doesn't accept HLC separately
-	 * explicit parameters override values derived from CIP
-	 */
-
-	/* determine lengths */
-	if (cmsg->BC && cmsg->BC[0])		/* BC specified explicitly */
-		lbc = 2 * cmsg->BC[0];
-	else if (cip2bchlc[cmsg->CIPValue].bc)	/* BC derived from CIP */
-		lbc = strlen(cip2bchlc[cmsg->CIPValue].bc);
-	else					/* no BC */
-		lbc = 0;
-	if (cmsg->HLC && cmsg->HLC[0])		/* HLC specified explicitly */
-		lhlc = 2 * cmsg->HLC[0];
-	else if (cip2bchlc[cmsg->CIPValue].hlc)	/* HLC derived from CIP */
-		lhlc = strlen(cip2bchlc[cmsg->CIPValue].hlc);
-	else					/* no HLC */
-		lhlc = 0;
-
-	if (lbc) {
-		/* have BC: allocate and assemble command string */
-		l = lbc + 7;		/* "^SBC=" + value + "\r" + null byte */
-		if (lhlc)
-			l += lhlc + 7;	/* ";^SHLC=" + value */
-		commands[AT_BC] = kmalloc(l, GFP_KERNEL);
-		if (!commands[AT_BC])
-			goto oom;
-		strcpy(commands[AT_BC], "^SBC=");
-		if (cmsg->BC && cmsg->BC[0])	/* BC specified explicitly */
-			decode_ie(cmsg->BC, commands[AT_BC] + 5);
-		else				/* BC derived from CIP */
-			strcpy(commands[AT_BC] + 5,
-			       cip2bchlc[cmsg->CIPValue].bc);
-		if (lhlc) {
-			strcpy(commands[AT_BC] + lbc + 5, ";^SHLC=");
-			if (cmsg->HLC && cmsg->HLC[0])
-				/* HLC specified explicitly */
-				decode_ie(cmsg->HLC,
-					  commands[AT_BC] + lbc + 12);
-			else	/* HLC derived from CIP */
-				strcpy(commands[AT_BC] + lbc + 12,
-				       cip2bchlc[cmsg->CIPValue].hlc);
-		}
-		strcpy(commands[AT_BC] + l - 2, "\r");
-	} else {
-		/* no BC */
-		if (lhlc) {
-			dev_notice(cs->dev, "%s: cannot set HLC without BC\n",
-				   "CONNECT_REQ");
-			info = CapiIllMessageParmCoding; /* ? */
-			goto error;
-		}
-	}
-
-	/* check/encode parameter: B Protocol */
-	if (cmsg->BProtocol == CAPI_DEFAULT) {
-		bcs->proto2 = L2_HDLC;
-		dev_warn(cs->dev,
-			 "B2 Protocol X.75 SLP unsupported, using Transparent\n");
-	} else {
-		switch (cmsg->B1protocol) {
-		case 0:
-			bcs->proto2 = L2_HDLC;
-			break;
-		case 1:
-			bcs->proto2 = L2_VOICE;
-			break;
-		default:
-			dev_warn(cs->dev,
-				 "B1 Protocol %u unsupported, using Transparent\n",
-				 cmsg->B1protocol);
-			bcs->proto2 = L2_VOICE;
-		}
-		if (cmsg->B2protocol != 1)
-			dev_warn(cs->dev,
-				 "B2 Protocol %u unsupported, using Transparent\n",
-				 cmsg->B2protocol);
-		if (cmsg->B3protocol != 0)
-			dev_warn(cs->dev,
-				 "B3 Protocol %u unsupported, using Transparent\n",
-				 cmsg->B3protocol);
-		ignore_cstruct_param(cs, cmsg->B1configuration,
-				     "CONNECT_REQ", "B1 Configuration");
-		ignore_cstruct_param(cs, cmsg->B2configuration,
-				     "CONNECT_REQ", "B2 Configuration");
-		ignore_cstruct_param(cs, cmsg->B3configuration,
-				     "CONNECT_REQ", "B3 Configuration");
-	}
-	commands[AT_PROTO] = kmalloc(9, GFP_KERNEL);
-	if (!commands[AT_PROTO])
-		goto oom;
-	snprintf(commands[AT_PROTO], 9, "^SBPR=%u\r", bcs->proto2);
-
-	/* ToDo: check/encode remaining parameters */
-	ignore_cstruct_param(cs, cmsg->CalledPartySubaddress,
-			     "CONNECT_REQ", "Called pty subaddr");
-	ignore_cstruct_param(cs, cmsg->CallingPartySubaddress,
-			     "CONNECT_REQ", "Calling pty subaddr");
-	ignore_cstruct_param(cs, cmsg->LLC,
-			     "CONNECT_REQ", "LLC");
-	if (cmsg->AdditionalInfo != CAPI_DEFAULT) {
-		ignore_cstruct_param(cs, cmsg->BChannelinformation,
-				     "CONNECT_REQ", "B Channel Information");
-		ignore_cstruct_param(cs, cmsg->Keypadfacility,
-				     "CONNECT_REQ", "Keypad Facility");
-		ignore_cstruct_param(cs, cmsg->Useruserdata,
-				     "CONNECT_REQ", "User-User Data");
-		ignore_cstruct_param(cs, cmsg->Facilitydataarray,
-				     "CONNECT_REQ", "Facility Data Array");
-	}
-
-	/* encode parameter: B channel to use */
-	commands[AT_ISO] = kmalloc(9, GFP_KERNEL);
-	if (!commands[AT_ISO])
-		goto oom;
-	snprintf(commands[AT_ISO], 9, "^SISO=%u\r",
-		 (unsigned) bcs->channel + 1);
-
-	/* queue & schedule EV_DIAL event */
-	if (!gigaset_add_event(cs, &bcs->at_state, EV_DIAL, commands,
-			       bcs->at_state.seq_index, NULL)) {
-		info = CAPI_MSGOSRESOURCEERR;
-		goto error;
-	}
-	gigaset_schedule_event(cs);
-	send_conf(iif, ap, skb, CapiSuccess);
-	return;
-
-oom:
-	dev_err(cs->dev, "%s: out of memory\n", __func__);
-	info = CAPI_MSGOSRESOURCEERR;
-error:
-	if (commands)
-		for (i = 0; i < AT_NUM; i++)
-			kfree(commands[i]);
-	kfree(commands);
-	gigaset_free_channel(bcs);
-	send_conf(iif, ap, skb, info);
-}
-
-/*
- * process CONNECT_RESP message
- * checks protocol parameters and queues an ACCEPT or HUP event
- */
-static void do_connect_resp(struct gigaset_capi_ctr *iif,
-			    struct gigaset_capi_appl *ap,
-			    struct sk_buff *skb)
-{
-	struct cardstate *cs = iif->ctr.driverdata;
-	_cmsg *cmsg = &iif->acmsg;
-	struct bc_state *bcs;
-	struct gigaset_capi_appl *oap;
-	unsigned long flags;
-	int channel;
-
-	/* decode message */
-	if (capi_message2cmsg(cmsg, skb->data)) {
-		dev_err(cs->dev, "%s: message parser failure\n", __func__);
-		dev_kfree_skb_any(skb);
-		return;
-	}
-	dump_cmsg(DEBUG_CMD, __func__, cmsg);
-	dev_kfree_skb_any(skb);
-
-	/* extract and check channel number from PLCI */
-	channel = (cmsg->adr.adrPLCI >> 8) & 0xff;
-	if (!channel || channel > cs->channels) {
-		dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
-			   "CONNECT_RESP", "PLCI", cmsg->adr.adrPLCI);
-		return;
-	}
-	bcs = cs->bcs + channel - 1;
-
-	switch (cmsg->Reject) {
-	case 0:		/* Accept */
-		/* drop all competing applications, keep only this one */
-		spin_lock_irqsave(&bcs->aplock, flags);
-		while (bcs->ap != NULL) {
-			oap = bcs->ap;
-			bcs->ap = oap->bcnext;
-			if (oap != ap) {
-				spin_unlock_irqrestore(&bcs->aplock, flags);
-				send_disconnect_ind(bcs, oap,
-						    CapiCallGivenToOtherApplication);
-				spin_lock_irqsave(&bcs->aplock, flags);
-			}
-		}
-		ap->bcnext = NULL;
-		bcs->ap = ap;
-		spin_unlock_irqrestore(&bcs->aplock, flags);
-
-		bcs->rx_bufsize = ap->rp.datablklen;
-		dev_kfree_skb(bcs->rx_skb);
-		gigaset_new_rx_skb(bcs);
-		bcs->chstate |= CHS_NOTIFY_LL;
-
-		/* check/encode B channel protocol */
-		if (cmsg->BProtocol == CAPI_DEFAULT) {
-			bcs->proto2 = L2_HDLC;
-			dev_warn(cs->dev,
-				 "B2 Protocol X.75 SLP unsupported, using Transparent\n");
-		} else {
-			switch (cmsg->B1protocol) {
-			case 0:
-				bcs->proto2 = L2_HDLC;
-				break;
-			case 1:
-				bcs->proto2 = L2_VOICE;
-				break;
-			default:
-				dev_warn(cs->dev,
-					 "B1 Protocol %u unsupported, using Transparent\n",
-					 cmsg->B1protocol);
-				bcs->proto2 = L2_VOICE;
-			}
-			if (cmsg->B2protocol != 1)
-				dev_warn(cs->dev,
-					 "B2 Protocol %u unsupported, using Transparent\n",
-					 cmsg->B2protocol);
-			if (cmsg->B3protocol != 0)
-				dev_warn(cs->dev,
-					 "B3 Protocol %u unsupported, using Transparent\n",
-					 cmsg->B3protocol);
-			ignore_cstruct_param(cs, cmsg->B1configuration,
-					     "CONNECT_RESP", "B1 Configuration");
-			ignore_cstruct_param(cs, cmsg->B2configuration,
-					     "CONNECT_RESP", "B2 Configuration");
-			ignore_cstruct_param(cs, cmsg->B3configuration,
-					     "CONNECT_RESP", "B3 Configuration");
-		}
-
-		/* ToDo: check/encode remaining parameters */
-		ignore_cstruct_param(cs, cmsg->ConnectedNumber,
-				     "CONNECT_RESP", "Connected Number");
-		ignore_cstruct_param(cs, cmsg->ConnectedSubaddress,
-				     "CONNECT_RESP", "Connected Subaddress");
-		ignore_cstruct_param(cs, cmsg->LLC,
-				     "CONNECT_RESP", "LLC");
-		if (cmsg->AdditionalInfo != CAPI_DEFAULT) {
-			ignore_cstruct_param(cs, cmsg->BChannelinformation,
-					     "CONNECT_RESP", "BChannel Information");
-			ignore_cstruct_param(cs, cmsg->Keypadfacility,
-					     "CONNECT_RESP", "Keypad Facility");
-			ignore_cstruct_param(cs, cmsg->Useruserdata,
-					     "CONNECT_RESP", "User-User Data");
-			ignore_cstruct_param(cs, cmsg->Facilitydataarray,
-					     "CONNECT_RESP", "Facility Data Array");
-		}
-
-		/* Accept call */
-		if (!gigaset_add_event(cs, &cs->bcs[channel - 1].at_state,
-				       EV_ACCEPT, NULL, 0, NULL))
-			return;
-		gigaset_schedule_event(cs);
-		return;
-
-	case 1:			/* Ignore */
-		/* send DISCONNECT_IND to this application */
-		send_disconnect_ind(bcs, ap, 0);
-
-		/* remove it from the list of listening apps */
-		spin_lock_irqsave(&bcs->aplock, flags);
-		if (bcs->ap == ap) {
-			bcs->ap = ap->bcnext;
-			if (bcs->ap == NULL) {
-				/* last one: stop ev-layer hupD notifications */
-				bcs->apconnstate = APCONN_NONE;
-				bcs->chstate &= ~CHS_NOTIFY_LL;
-			}
-			spin_unlock_irqrestore(&bcs->aplock, flags);
-			return;
-		}
-		for (oap = bcs->ap; oap != NULL; oap = oap->bcnext) {
-			if (oap->bcnext == ap) {
-				oap->bcnext = oap->bcnext->bcnext;
-				spin_unlock_irqrestore(&bcs->aplock, flags);
-				return;
-			}
-		}
-		spin_unlock_irqrestore(&bcs->aplock, flags);
-		dev_err(cs->dev, "%s: application %u not found\n",
-			__func__, ap->id);
-		return;
-
-	default:		/* Reject */
-		/* drop all competing applications, keep only this one */
-		spin_lock_irqsave(&bcs->aplock, flags);
-		while (bcs->ap != NULL) {
-			oap = bcs->ap;
-			bcs->ap = oap->bcnext;
-			if (oap != ap) {
-				spin_unlock_irqrestore(&bcs->aplock, flags);
-				send_disconnect_ind(bcs, oap,
-						    CapiCallGivenToOtherApplication);
-				spin_lock_irqsave(&bcs->aplock, flags);
-			}
-		}
-		ap->bcnext = NULL;
-		bcs->ap = ap;
-		spin_unlock_irqrestore(&bcs->aplock, flags);
-
-		/* reject call - will trigger DISCONNECT_IND for this app */
-		dev_info(cs->dev, "%s: Reject=%x\n",
-			 "CONNECT_RESP", cmsg->Reject);
-		if (!gigaset_add_event(cs, &cs->bcs[channel - 1].at_state,
-				       EV_HUP, NULL, 0, NULL))
-			return;
-		gigaset_schedule_event(cs);
-		return;
-	}
-}
-
-/*
- * process CONNECT_B3_REQ message
- * build NCCI and emit CONNECT_B3_CONF reply
- */
-static void do_connect_b3_req(struct gigaset_capi_ctr *iif,
-			      struct gigaset_capi_appl *ap,
-			      struct sk_buff *skb)
-{
-	struct cardstate *cs = iif->ctr.driverdata;
-	_cmsg *cmsg = &iif->acmsg;
-	struct bc_state *bcs;
-	int channel;
-
-	/* decode message */
-	if (capi_message2cmsg(cmsg, skb->data)) {
-		dev_err(cs->dev, "%s: message parser failure\n", __func__);
-		dev_kfree_skb_any(skb);
-		return;
-	}
-	dump_cmsg(DEBUG_CMD, __func__, cmsg);
-
-	/* extract and check channel number from PLCI */
-	channel = (cmsg->adr.adrPLCI >> 8) & 0xff;
-	if (!channel || channel > cs->channels) {
-		dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
-			   "CONNECT_B3_REQ", "PLCI", cmsg->adr.adrPLCI);
-		send_conf(iif, ap, skb, CapiIllContrPlciNcci);
-		return;
-	}
-	bcs = &cs->bcs[channel - 1];
-
-	/* mark logical connection active */
-	bcs->apconnstate = APCONN_ACTIVE;
-
-	/* build NCCI: always 1 (one B3 connection only) */
-	cmsg->adr.adrNCCI |= 1 << 16;
-
-	/* NCPI parameter: not applicable for B3 Transparent */
-	ignore_cstruct_param(cs, cmsg->NCPI, "CONNECT_B3_REQ", "NCPI");
-	send_conf(iif, ap, skb,
-		  (cmsg->NCPI && cmsg->NCPI[0]) ?
-		  CapiNcpiNotSupportedByProtocol : CapiSuccess);
-}
-
-/*
- * process CONNECT_B3_RESP message
- * Depending on the Reject parameter, either emit CONNECT_B3_ACTIVE_IND
- * or queue EV_HUP and emit DISCONNECT_B3_IND.
- * The emitted message is always shorter than the received one,
- * allowing to reuse the skb.
- */
-static void do_connect_b3_resp(struct gigaset_capi_ctr *iif,
-			       struct gigaset_capi_appl *ap,
-			       struct sk_buff *skb)
-{
-	struct cardstate *cs = iif->ctr.driverdata;
-	_cmsg *cmsg = &iif->acmsg;
-	struct bc_state *bcs;
-	int channel;
-	unsigned int msgsize;
-	u8 command;
-
-	/* decode message */
-	if (capi_message2cmsg(cmsg, skb->data)) {
-		dev_err(cs->dev, "%s: message parser failure\n", __func__);
-		dev_kfree_skb_any(skb);
-		return;
-	}
-	dump_cmsg(DEBUG_CMD, __func__, cmsg);
-
-	/* extract and check channel number and NCCI */
-	channel = (cmsg->adr.adrNCCI >> 8) & 0xff;
-	if (!channel || channel > cs->channels ||
-	    ((cmsg->adr.adrNCCI >> 16) & 0xffff) != 1) {
-		dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
-			   "CONNECT_B3_RESP", "NCCI", cmsg->adr.adrNCCI);
-		dev_kfree_skb_any(skb);
-		return;
-	}
-	bcs = &cs->bcs[channel - 1];
-
-	if (cmsg->Reject) {
-		/* Reject: clear B3 connect received flag */
-		bcs->apconnstate = APCONN_SETUP;
-
-		/* trigger hangup, causing eventual DISCONNECT_IND */
-		if (!gigaset_add_event(cs, &bcs->at_state,
-				       EV_HUP, NULL, 0, NULL)) {
-			dev_kfree_skb_any(skb);
-			return;
-		}
-		gigaset_schedule_event(cs);
-
-		/* emit DISCONNECT_B3_IND */
-		command = CAPI_DISCONNECT_B3;
-		msgsize = CAPI_DISCONNECT_B3_IND_BASELEN;
-	} else {
-		/*
-		 * Accept: emit CONNECT_B3_ACTIVE_IND immediately, as
-		 * we only send CONNECT_B3_IND if the B channel is up
-		 */
-		command = CAPI_CONNECT_B3_ACTIVE;
-		msgsize = CAPI_CONNECT_B3_ACTIVE_IND_BASELEN;
-	}
-	capi_cmsg_header(cmsg, ap->id, command, CAPI_IND,
-			 ap->nextMessageNumber++, cmsg->adr.adrNCCI);
-	__skb_trim(skb, msgsize);
-	if (capi_cmsg2message(cmsg, skb->data)) {
-		dev_err(cs->dev, "%s: message parser failure\n", __func__);
-		dev_kfree_skb_any(skb);
-		return;
-	}
-	dump_cmsg(DEBUG_CMD, __func__, cmsg);
-	capi_ctr_handle_message(&iif->ctr, ap->id, skb);
-}
-
-/*
- * process DISCONNECT_REQ message
- * schedule EV_HUP and emit DISCONNECT_B3_IND if necessary,
- * emit DISCONNECT_CONF reply
- */
-static void do_disconnect_req(struct gigaset_capi_ctr *iif,
-			      struct gigaset_capi_appl *ap,
-			      struct sk_buff *skb)
-{
-	struct cardstate *cs = iif->ctr.driverdata;
-	_cmsg *cmsg = &iif->acmsg;
-	struct bc_state *bcs;
-	_cmsg *b3cmsg;
-	struct sk_buff *b3skb;
-	int channel;
-
-	/* decode message */
-	if (capi_message2cmsg(cmsg, skb->data)) {
-		dev_err(cs->dev, "%s: message parser failure\n", __func__);
-		dev_kfree_skb_any(skb);
-		return;
-	}
-	dump_cmsg(DEBUG_CMD, __func__, cmsg);
-
-	/* extract and check channel number from PLCI */
-	channel = (cmsg->adr.adrPLCI >> 8) & 0xff;
-	if (!channel || channel > cs->channels) {
-		dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
-			   "DISCONNECT_REQ", "PLCI", cmsg->adr.adrPLCI);
-		send_conf(iif, ap, skb, CapiIllContrPlciNcci);
-		return;
-	}
-	bcs = cs->bcs + channel - 1;
-
-	/* ToDo: process parameter: Additional info */
-	if (cmsg->AdditionalInfo != CAPI_DEFAULT) {
-		ignore_cstruct_param(cs, cmsg->BChannelinformation,
-				     "DISCONNECT_REQ", "B Channel Information");
-		ignore_cstruct_param(cs, cmsg->Keypadfacility,
-				     "DISCONNECT_REQ", "Keypad Facility");
-		ignore_cstruct_param(cs, cmsg->Useruserdata,
-				     "DISCONNECT_REQ", "User-User Data");
-		ignore_cstruct_param(cs, cmsg->Facilitydataarray,
-				     "DISCONNECT_REQ", "Facility Data Array");
-	}
-
-	/* skip if DISCONNECT_IND already sent */
-	if (!bcs->apconnstate)
-		return;
-
-	/* check for active logical connection */
-	if (bcs->apconnstate >= APCONN_ACTIVE) {
-		/* clear it */
-		bcs->apconnstate = APCONN_SETUP;
-
-		/*
-		 * emit DISCONNECT_B3_IND with cause 0x3301
-		 * use separate cmsg structure, as the content of iif->acmsg
-		 * is still needed for creating the _CONF message
-		 */
-		b3cmsg = kmalloc(sizeof(*b3cmsg), GFP_KERNEL);
-		if (!b3cmsg) {
-			dev_err(cs->dev, "%s: out of memory\n", __func__);
-			send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR);
-			return;
-		}
-		capi_cmsg_header(b3cmsg, ap->id, CAPI_DISCONNECT_B3, CAPI_IND,
-				 ap->nextMessageNumber++,
-				 cmsg->adr.adrPLCI | (1 << 16));
-		b3cmsg->Reason_B3 = CapiProtocolErrorLayer1;
-		b3skb = alloc_skb(CAPI_DISCONNECT_B3_IND_BASELEN, GFP_KERNEL);
-		if (b3skb == NULL) {
-			dev_err(cs->dev, "%s: out of memory\n", __func__);
-			send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR);
-			kfree(b3cmsg);
-			return;
-		}
-		if (capi_cmsg2message(b3cmsg,
-				      __skb_put(b3skb, CAPI_DISCONNECT_B3_IND_BASELEN))) {
-			dev_err(cs->dev, "%s: message parser failure\n",
-				__func__);
-			kfree(b3cmsg);
-			dev_kfree_skb_any(b3skb);
-			return;
-		}
-		dump_cmsg(DEBUG_CMD, __func__, b3cmsg);
-		kfree(b3cmsg);
-		capi_ctr_handle_message(&iif->ctr, ap->id, b3skb);
-	}
-
-	/* trigger hangup, causing eventual DISCONNECT_IND */
-	if (!gigaset_add_event(cs, &bcs->at_state, EV_HUP, NULL, 0, NULL)) {
-		send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR);
-		return;
-	}
-	gigaset_schedule_event(cs);
-
-	/* emit reply */
-	send_conf(iif, ap, skb, CapiSuccess);
-}
-
-/*
- * process DISCONNECT_B3_REQ message
- * schedule EV_HUP and emit DISCONNECT_B3_CONF reply
- */
-static void do_disconnect_b3_req(struct gigaset_capi_ctr *iif,
-				 struct gigaset_capi_appl *ap,
-				 struct sk_buff *skb)
-{
-	struct cardstate *cs = iif->ctr.driverdata;
-	_cmsg *cmsg = &iif->acmsg;
-	struct bc_state *bcs;
-	int channel;
-
-	/* decode message */
-	if (capi_message2cmsg(cmsg, skb->data)) {
-		dev_err(cs->dev, "%s: message parser failure\n", __func__);
-		dev_kfree_skb_any(skb);
-		return;
-	}
-	dump_cmsg(DEBUG_CMD, __func__, cmsg);
-
-	/* extract and check channel number and NCCI */
-	channel = (cmsg->adr.adrNCCI >> 8) & 0xff;
-	if (!channel || channel > cs->channels ||
-	    ((cmsg->adr.adrNCCI >> 16) & 0xffff) != 1) {
-		dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
-			   "DISCONNECT_B3_REQ", "NCCI", cmsg->adr.adrNCCI);
-		send_conf(iif, ap, skb, CapiIllContrPlciNcci);
-		return;
-	}
-	bcs = &cs->bcs[channel - 1];
-
-	/* reject if logical connection not active */
-	if (bcs->apconnstate < APCONN_ACTIVE) {
-		send_conf(iif, ap, skb,
-			  CapiMessageNotSupportedInCurrentState);
-		return;
-	}
-
-	/* trigger hangup, causing eventual DISCONNECT_B3_IND */
-	if (!gigaset_add_event(cs, &bcs->at_state, EV_HUP, NULL, 0, NULL)) {
-		send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR);
-		return;
-	}
-	gigaset_schedule_event(cs);
-
-	/* NCPI parameter: not applicable for B3 Transparent */
-	ignore_cstruct_param(cs, cmsg->NCPI,
-			     "DISCONNECT_B3_REQ", "NCPI");
-	send_conf(iif, ap, skb,
-		  (cmsg->NCPI && cmsg->NCPI[0]) ?
-		  CapiNcpiNotSupportedByProtocol : CapiSuccess);
-}
-
-/*
- * process DATA_B3_REQ message
- */
-static void do_data_b3_req(struct gigaset_capi_ctr *iif,
-			   struct gigaset_capi_appl *ap,
-			   struct sk_buff *skb)
-{
-	struct cardstate *cs = iif->ctr.driverdata;
-	struct bc_state *bcs;
-	int channel = CAPIMSG_PLCI_PART(skb->data);
-	u16 ncci = CAPIMSG_NCCI_PART(skb->data);
-	u16 msglen = CAPIMSG_LEN(skb->data);
-	u16 datalen = CAPIMSG_DATALEN(skb->data);
-	u16 flags = CAPIMSG_FLAGS(skb->data);
-	u16 msgid = CAPIMSG_MSGID(skb->data);
-	u16 handle = CAPIMSG_HANDLE_REQ(skb->data);
-
-	/* frequent message, avoid _cmsg overhead */
-	dump_rawmsg(DEBUG_MCMD, __func__, skb->data);
-
-	/* check parameters */
-	if (channel == 0 || channel > cs->channels || ncci != 1) {
-		dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
-			   "DATA_B3_REQ", "NCCI", CAPIMSG_NCCI(skb->data));
-		send_conf(iif, ap, skb, CapiIllContrPlciNcci);
-		return;
-	}
-	bcs = &cs->bcs[channel - 1];
-	if (msglen != CAPI_DATA_B3_REQ_LEN && msglen != CAPI_DATA_B3_REQ_LEN64)
-		dev_notice(cs->dev, "%s: unexpected length %d\n",
-			   "DATA_B3_REQ", msglen);
-	if (msglen + datalen != skb->len)
-		dev_notice(cs->dev, "%s: length mismatch (%d+%d!=%d)\n",
-			   "DATA_B3_REQ", msglen, datalen, skb->len);
-	if (msglen + datalen > skb->len) {
-		/* message too short for announced data length */
-		send_conf(iif, ap, skb, CapiIllMessageParmCoding); /* ? */
-		return;
-	}
-	if (flags & CAPI_FLAGS_RESERVED) {
-		dev_notice(cs->dev, "%s: reserved flags set (%x)\n",
-			   "DATA_B3_REQ", flags);
-		send_conf(iif, ap, skb, CapiIllMessageParmCoding);
-		return;
-	}
-
-	/* reject if logical connection not active */
-	if (bcs->apconnstate < APCONN_ACTIVE) {
-		send_conf(iif, ap, skb, CapiMessageNotSupportedInCurrentState);
-		return;
-	}
-
-	/* pull CAPI message into link layer header */
-	skb_reset_mac_header(skb);
-	skb->mac_len = msglen;
-	skb_pull(skb, msglen);
-
-	/* pass to device-specific module */
-	if (cs->ops->send_skb(bcs, skb) < 0) {
-		send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR);
-		return;
-	}
-
-	/*
-	 * DATA_B3_CONF will be sent by gigaset_skb_sent() only if "delivery
-	 * confirmation" bit is set; otherwise we have to send it now
-	 */
-	if (!(flags & CAPI_FLAGS_DELIVERY_CONFIRMATION))
-		send_data_b3_conf(cs, &iif->ctr, ap->id, msgid, channel, handle,
-				  flags ? CapiFlagsNotSupportedByProtocol
-				  : CAPI_NOERROR);
-}
-
-/*
- * process RESET_B3_REQ message
- * just always reply "not supported by current protocol"
- */
-static void do_reset_b3_req(struct gigaset_capi_ctr *iif,
-			    struct gigaset_capi_appl *ap,
-			    struct sk_buff *skb)
-{
-	struct cardstate *cs = iif->ctr.driverdata;
-
-	/* decode message */
-	if (capi_message2cmsg(&iif->acmsg, skb->data)) {
-		dev_err(cs->dev, "%s: message parser failure\n", __func__);
-		dev_kfree_skb_any(skb);
-		return;
-	}
-	dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
-	send_conf(iif, ap, skb,
-		  CapiResetProcedureNotSupportedByCurrentProtocol);
-}
-
-/*
- * unsupported CAPI message handler
- */
-static void do_unsupported(struct gigaset_capi_ctr *iif,
-			   struct gigaset_capi_appl *ap,
-			   struct sk_buff *skb)
-{
-	struct cardstate *cs = iif->ctr.driverdata;
-
-	/* decode message */
-	if (capi_message2cmsg(&iif->acmsg, skb->data)) {
-		dev_err(cs->dev, "%s: message parser failure\n", __func__);
-		dev_kfree_skb_any(skb);
-		return;
-	}
-	dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
-	send_conf(iif, ap, skb, CapiMessageNotSupportedInCurrentState);
-}
-
-/*
- * CAPI message handler: no-op
- */
-static void do_nothing(struct gigaset_capi_ctr *iif,
-		       struct gigaset_capi_appl *ap,
-		       struct sk_buff *skb)
-{
-	struct cardstate *cs = iif->ctr.driverdata;
-
-	/* decode message */
-	if (capi_message2cmsg(&iif->acmsg, skb->data)) {
-		dev_err(cs->dev, "%s: message parser failure\n", __func__);
-		dev_kfree_skb_any(skb);
-		return;
-	}
-	dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
-	dev_kfree_skb_any(skb);
-}
-
-static void do_data_b3_resp(struct gigaset_capi_ctr *iif,
-			    struct gigaset_capi_appl *ap,
-			    struct sk_buff *skb)
-{
-	dump_rawmsg(DEBUG_MCMD, __func__, skb->data);
-	dev_kfree_skb_any(skb);
-}
-
-/* table of outgoing CAPI message handlers with lookup function */
-typedef void (*capi_send_handler_t)(struct gigaset_capi_ctr *,
-				    struct gigaset_capi_appl *,
-				    struct sk_buff *);
-
-static struct {
-	u16 cmd;
-	capi_send_handler_t handler;
-} capi_send_handler_table[] = {
-	/* most frequent messages first for faster lookup */
-	{ CAPI_DATA_B3_REQ, do_data_b3_req },
-	{ CAPI_DATA_B3_RESP, do_data_b3_resp },
-
-	{ CAPI_ALERT_REQ, do_alert_req },
-	{ CAPI_CONNECT_ACTIVE_RESP, do_nothing },
-	{ CAPI_CONNECT_B3_ACTIVE_RESP, do_nothing },
-	{ CAPI_CONNECT_B3_REQ, do_connect_b3_req },
-	{ CAPI_CONNECT_B3_RESP, do_connect_b3_resp },
-	{ CAPI_CONNECT_B3_T90_ACTIVE_RESP, do_nothing },
-	{ CAPI_CONNECT_REQ, do_connect_req },
-	{ CAPI_CONNECT_RESP, do_connect_resp },
-	{ CAPI_DISCONNECT_B3_REQ, do_disconnect_b3_req },
-	{ CAPI_DISCONNECT_B3_RESP, do_nothing },
-	{ CAPI_DISCONNECT_REQ, do_disconnect_req },
-	{ CAPI_DISCONNECT_RESP, do_nothing },
-	{ CAPI_FACILITY_REQ, do_facility_req },
-	{ CAPI_FACILITY_RESP, do_nothing },
-	{ CAPI_LISTEN_REQ, do_listen_req },
-	{ CAPI_SELECT_B_PROTOCOL_REQ, do_unsupported },
-	{ CAPI_RESET_B3_REQ, do_reset_b3_req },
-	{ CAPI_RESET_B3_RESP, do_nothing },
-
-	/*
-	 * ToDo: support overlap sending (requires ev-layer state
-	 * machine extension to generate additional ATD commands)
-	 */
-	{ CAPI_INFO_REQ, do_unsupported },
-	{ CAPI_INFO_RESP, do_nothing },
-
-	/*
-	 * ToDo: what's the proper response for these?
-	 */
-	{ CAPI_MANUFACTURER_REQ, do_nothing },
-	{ CAPI_MANUFACTURER_RESP, do_nothing },
-};
-
-/* look up handler */
-static inline capi_send_handler_t lookup_capi_send_handler(const u16 cmd)
-{
-	size_t i;
-
-	for (i = 0; i < ARRAY_SIZE(capi_send_handler_table); i++)
-		if (capi_send_handler_table[i].cmd == cmd)
-			return capi_send_handler_table[i].handler;
-	return NULL;
-}
-
-
-/**
- * gigaset_send_message() - accept a CAPI message from an application
- * @ctr:	controller descriptor structure.
- * @skb:	CAPI message.
- *
- * Return value: CAPI error code
- * Note: capidrv (and probably others, too) only uses the return value to
- * decide whether it has to free the skb (only if result != CAPI_NOERROR (0))
- */
-static u16 gigaset_send_message(struct capi_ctr *ctr, struct sk_buff *skb)
-{
-	struct gigaset_capi_ctr *iif
-		= container_of(ctr, struct gigaset_capi_ctr, ctr);
-	struct cardstate *cs = ctr->driverdata;
-	struct gigaset_capi_appl *ap;
-	capi_send_handler_t handler;
-
-	/* can only handle linear sk_buffs */
-	if (skb_linearize(skb) < 0) {
-		dev_warn(cs->dev, "%s: skb_linearize failed\n", __func__);
-		return CAPI_MSGOSRESOURCEERR;
-	}
-
-	/* retrieve application data structure */
-	ap = get_appl(iif, CAPIMSG_APPID(skb->data));
-	if (!ap) {
-		dev_notice(cs->dev, "%s: application %u not registered\n",
-			   __func__, CAPIMSG_APPID(skb->data));
-		return CAPI_ILLAPPNR;
-	}
-
-	/* look up command */
-	handler = lookup_capi_send_handler(CAPIMSG_CMD(skb->data));
-	if (!handler) {
-		/* unknown/unsupported message type */
-		if (printk_ratelimit())
-			dev_notice(cs->dev, "%s: unsupported message %u\n",
-				   __func__, CAPIMSG_CMD(skb->data));
-		return CAPI_ILLCMDORSUBCMDORMSGTOSMALL;
-	}
-
-	/* serialize */
-	if (atomic_add_return(1, &iif->sendqlen) > 1) {
-		/* queue behind other messages */
-		skb_queue_tail(&iif->sendqueue, skb);
-		return CAPI_NOERROR;
-	}
-
-	/* process message */
-	handler(iif, ap, skb);
-
-	/* process other messages arrived in the meantime */
-	while (atomic_sub_return(1, &iif->sendqlen) > 0) {
-		skb = skb_dequeue(&iif->sendqueue);
-		if (!skb) {
-			/* should never happen */
-			dev_err(cs->dev, "%s: send queue empty\n", __func__);
-			continue;
-		}
-		ap = get_appl(iif, CAPIMSG_APPID(skb->data));
-		if (!ap) {
-			/* could that happen? */
-			dev_warn(cs->dev, "%s: application %u vanished\n",
-				 __func__, CAPIMSG_APPID(skb->data));
-			continue;
-		}
-		handler = lookup_capi_send_handler(CAPIMSG_CMD(skb->data));
-		if (!handler) {
-			/* should never happen */
-			dev_err(cs->dev, "%s: handler %x vanished\n",
-				__func__, CAPIMSG_CMD(skb->data));
-			continue;
-		}
-		handler(iif, ap, skb);
-	}
-
-	return CAPI_NOERROR;
-}
-
-/**
- * gigaset_procinfo() - build single line description for controller
- * @ctr:	controller descriptor structure.
- *
- * Return value: pointer to generated string (null terminated)
- */
-static char *gigaset_procinfo(struct capi_ctr *ctr)
-{
-	return ctr->name;	/* ToDo: more? */
-}
-
-static int gigaset_proc_show(struct seq_file *m, void *v)
-{
-	struct capi_ctr *ctr = m->private;
-	struct cardstate *cs = ctr->driverdata;
-	char *s;
-	int i;
-
-	seq_printf(m, "%-16s %s\n", "name", ctr->name);
-	seq_printf(m, "%-16s %s %s\n", "dev",
-		   dev_driver_string(cs->dev), dev_name(cs->dev));
-	seq_printf(m, "%-16s %d\n", "id", cs->myid);
-	if (cs->gotfwver)
-		seq_printf(m, "%-16s %d.%d.%d.%d\n", "firmware",
-			   cs->fwver[0], cs->fwver[1], cs->fwver[2], cs->fwver[3]);
-	seq_printf(m, "%-16s %d\n", "channels", cs->channels);
-	seq_printf(m, "%-16s %s\n", "onechannel", cs->onechannel ? "yes" : "no");
-
-	switch (cs->mode) {
-	case M_UNKNOWN:
-		s = "unknown";
-		break;
-	case M_CONFIG:
-		s = "config";
-		break;
-	case M_UNIMODEM:
-		s = "Unimodem";
-		break;
-	case M_CID:
-		s = "CID";
-		break;
-	default:
-		s = "??";
-	}
-	seq_printf(m, "%-16s %s\n", "mode", s);
-
-	switch (cs->mstate) {
-	case MS_UNINITIALIZED:
-		s = "uninitialized";
-		break;
-	case MS_INIT:
-		s = "init";
-		break;
-	case MS_LOCKED:
-		s = "locked";
-		break;
-	case MS_SHUTDOWN:
-		s = "shutdown";
-		break;
-	case MS_RECOVER:
-		s = "recover";
-		break;
-	case MS_READY:
-		s = "ready";
-		break;
-	default:
-		s = "??";
-	}
-	seq_printf(m, "%-16s %s\n", "mstate", s);
-
-	seq_printf(m, "%-16s %s\n", "running", cs->running ? "yes" : "no");
-	seq_printf(m, "%-16s %s\n", "connected", cs->connected ? "yes" : "no");
-	seq_printf(m, "%-16s %s\n", "isdn_up", cs->isdn_up ? "yes" : "no");
-	seq_printf(m, "%-16s %s\n", "cidmode", cs->cidmode ? "yes" : "no");
-
-	for (i = 0; i < cs->channels; i++) {
-		seq_printf(m, "[%d]%-13s %d\n", i, "corrupted",
-			   cs->bcs[i].corrupted);
-		seq_printf(m, "[%d]%-13s %d\n", i, "trans_down",
-			   cs->bcs[i].trans_down);
-		seq_printf(m, "[%d]%-13s %d\n", i, "trans_up",
-			   cs->bcs[i].trans_up);
-		seq_printf(m, "[%d]%-13s %d\n", i, "chstate",
-			   cs->bcs[i].chstate);
-		switch (cs->bcs[i].proto2) {
-		case L2_BITSYNC:
-			s = "bitsync";
-			break;
-		case L2_HDLC:
-			s = "HDLC";
-			break;
-		case L2_VOICE:
-			s = "voice";
-			break;
-		default:
-			s = "??";
-		}
-		seq_printf(m, "[%d]%-13s %s\n", i, "proto2", s);
-	}
-	return 0;
-}
-
-/**
- * gigaset_isdn_regdev() - register device to LL
- * @cs:		device descriptor structure.
- * @isdnid:	device name.
- *
- * Return value: 0 on success, error code < 0 on failure
- */
-int gigaset_isdn_regdev(struct cardstate *cs, const char *isdnid)
-{
-	struct gigaset_capi_ctr *iif;
-	int rc;
-
-	iif = kzalloc(sizeof(*iif), GFP_KERNEL);
-	if (!iif) {
-		pr_err("%s: out of memory\n", __func__);
-		return -ENOMEM;
-	}
-
-	/* prepare controller structure */
-	iif->ctr.owner         = THIS_MODULE;
-	iif->ctr.driverdata    = cs;
-	strncpy(iif->ctr.name, isdnid, sizeof(iif->ctr.name) - 1);
-	iif->ctr.driver_name   = "gigaset";
-	iif->ctr.load_firmware = NULL;
-	iif->ctr.reset_ctr     = NULL;
-	iif->ctr.register_appl = gigaset_register_appl;
-	iif->ctr.release_appl  = gigaset_release_appl;
-	iif->ctr.send_message  = gigaset_send_message;
-	iif->ctr.procinfo      = gigaset_procinfo;
-	iif->ctr.proc_show     = gigaset_proc_show,
-	INIT_LIST_HEAD(&iif->appls);
-	skb_queue_head_init(&iif->sendqueue);
-	atomic_set(&iif->sendqlen, 0);
-
-	/* register controller with CAPI */
-	rc = attach_capi_ctr(&iif->ctr);
-	if (rc) {
-		pr_err("attach_capi_ctr failed (%d)\n", rc);
-		kfree(iif);
-		return rc;
-	}
-
-	cs->iif = iif;
-	cs->hw_hdr_len = CAPI_DATA_B3_REQ_LEN;
-	return 0;
-}
-
-/**
- * gigaset_isdn_unregdev() - unregister device from LL
- * @cs:		device descriptor structure.
- */
-void gigaset_isdn_unregdev(struct cardstate *cs)
-{
-	struct gigaset_capi_ctr *iif = cs->iif;
-
-	detach_capi_ctr(&iif->ctr);
-	kfree(iif);
-	cs->iif = NULL;
-}
-
-static struct capi_driver capi_driver_gigaset = {
-	.name		= "gigaset",
-	.revision	= "1.0",
-};
-
-/**
- * gigaset_isdn_regdrv() - register driver to LL
- */
-void gigaset_isdn_regdrv(void)
-{
-	pr_info("Kernel CAPI interface\n");
-	register_capi_driver(&capi_driver_gigaset);
-}
-
-/**
- * gigaset_isdn_unregdrv() - unregister driver from LL
- */
-void gigaset_isdn_unregdrv(void)
-{
-	unregister_capi_driver(&capi_driver_gigaset);
-}
diff --git a/drivers/staging/isdn/gigaset/common.c b/drivers/staging/isdn/gigaset/common.c
deleted file mode 100644
index 3bb8092858ab..000000000000
--- a/drivers/staging/isdn/gigaset/common.c
+++ /dev/null
@@ -1,1153 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Stuff used by all variants of the driver
- *
- * Copyright (c) 2001 by Stefan Eilers,
- *                       Hansjoerg Lipp <hjlipp@web.de>,
- *                       Tilman Schmidt <tilman@imap.cc>.
- *
- * =====================================================================
- * =====================================================================
- */
-
-#include "gigaset.h"
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-
-/* Version Information */
-#define DRIVER_AUTHOR "Hansjoerg Lipp <hjlipp@web.de>, Tilman Schmidt <tilman@imap.cc>, Stefan Eilers"
-#define DRIVER_DESC "Driver for Gigaset 307x"
-
-#ifdef CONFIG_GIGASET_DEBUG
-#define DRIVER_DESC_DEBUG " (debug build)"
-#else
-#define DRIVER_DESC_DEBUG ""
-#endif
-
-/* Module parameters */
-int gigaset_debuglevel;
-EXPORT_SYMBOL_GPL(gigaset_debuglevel);
-module_param_named(debug, gigaset_debuglevel, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "debug level");
-
-/* driver state flags */
-#define VALID_MINOR	0x01
-#define VALID_ID	0x02
-
-/**
- * gigaset_dbg_buffer() - dump data in ASCII and hex for debugging
- * @level:	debugging level.
- * @msg:	message prefix.
- * @len:	number of bytes to dump.
- * @buf:	data to dump.
- *
- * If the current debugging level includes one of the bits set in @level,
- * @len bytes starting at @buf are logged to dmesg at KERN_DEBUG prio,
- * prefixed by the text @msg.
- */
-void gigaset_dbg_buffer(enum debuglevel level, const unsigned char *msg,
-			size_t len, const unsigned char *buf)
-{
-	unsigned char outbuf[80];
-	unsigned char c;
-	size_t space = sizeof outbuf - 1;
-	unsigned char *out = outbuf;
-	size_t numin = len;
-
-	while (numin--) {
-		c = *buf++;
-		if (c == '~' || c == '^' || c == '\\') {
-			if (!space--)
-				break;
-			*out++ = '\\';
-		}
-		if (c & 0x80) {
-			if (!space--)
-				break;
-			*out++ = '~';
-			c ^= 0x80;
-		}
-		if (c < 0x20 || c == 0x7f) {
-			if (!space--)
-				break;
-			*out++ = '^';
-			c ^= 0x40;
-		}
-		if (!space--)
-			break;
-		*out++ = c;
-	}
-	*out = 0;
-
-	gig_dbg(level, "%s (%u bytes): %s", msg, (unsigned) len, outbuf);
-}
-EXPORT_SYMBOL_GPL(gigaset_dbg_buffer);
-
-static int setflags(struct cardstate *cs, unsigned flags, unsigned delay)
-{
-	int r;
-
-	r = cs->ops->set_modem_ctrl(cs, cs->control_state, flags);
-	cs->control_state = flags;
-	if (r < 0)
-		return r;
-
-	if (delay) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(delay * HZ / 1000);
-	}
-
-	return 0;
-}
-
-int gigaset_enterconfigmode(struct cardstate *cs)
-{
-	int i, r;
-
-	cs->control_state = TIOCM_RTS;
-
-	r = setflags(cs, TIOCM_DTR, 200);
-	if (r < 0)
-		goto error;
-	r = setflags(cs, 0, 200);
-	if (r < 0)
-		goto error;
-	for (i = 0; i < 5; ++i) {
-		r = setflags(cs, TIOCM_RTS, 100);
-		if (r < 0)
-			goto error;
-		r = setflags(cs, 0, 100);
-		if (r < 0)
-			goto error;
-	}
-	r = setflags(cs, TIOCM_RTS | TIOCM_DTR, 800);
-	if (r < 0)
-		goto error;
-
-	return 0;
-
-error:
-	dev_err(cs->dev, "error %d on setuartbits\n", -r);
-	cs->control_state = TIOCM_RTS | TIOCM_DTR;
-	cs->ops->set_modem_ctrl(cs, 0, TIOCM_RTS | TIOCM_DTR);
-
-	return -1;
-}
-
-static int test_timeout(struct at_state_t *at_state)
-{
-	if (!at_state->timer_expires)
-		return 0;
-
-	if (--at_state->timer_expires) {
-		gig_dbg(DEBUG_MCMD, "decreased timer of %p to %lu",
-			at_state, at_state->timer_expires);
-		return 0;
-	}
-
-	gigaset_add_event(at_state->cs, at_state, EV_TIMEOUT, NULL,
-			  at_state->timer_index, NULL);
-	return 1;
-}
-
-static void timer_tick(struct timer_list *t)
-{
-	struct cardstate *cs = from_timer(cs, t, timer);
-	unsigned long flags;
-	unsigned channel;
-	struct at_state_t *at_state;
-	int timeout = 0;
-
-	spin_lock_irqsave(&cs->lock, flags);
-
-	for (channel = 0; channel < cs->channels; ++channel)
-		if (test_timeout(&cs->bcs[channel].at_state))
-			timeout = 1;
-
-	if (test_timeout(&cs->at_state))
-		timeout = 1;
-
-	list_for_each_entry(at_state, &cs->temp_at_states, list)
-		if (test_timeout(at_state))
-			timeout = 1;
-
-	if (cs->running) {
-		mod_timer(&cs->timer, jiffies + msecs_to_jiffies(GIG_TICK));
-		if (timeout) {
-			gig_dbg(DEBUG_EVENT, "scheduling timeout");
-			tasklet_schedule(&cs->event_tasklet);
-		}
-	}
-
-	spin_unlock_irqrestore(&cs->lock, flags);
-}
-
-int gigaset_get_channel(struct bc_state *bcs)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&bcs->cs->lock, flags);
-	if (bcs->use_count || !try_module_get(bcs->cs->driver->owner)) {
-		gig_dbg(DEBUG_CHANNEL, "could not allocate channel %d",
-			bcs->channel);
-		spin_unlock_irqrestore(&bcs->cs->lock, flags);
-		return -EBUSY;
-	}
-	++bcs->use_count;
-	bcs->busy = 1;
-	gig_dbg(DEBUG_CHANNEL, "allocated channel %d", bcs->channel);
-	spin_unlock_irqrestore(&bcs->cs->lock, flags);
-	return 0;
-}
-
-struct bc_state *gigaset_get_free_channel(struct cardstate *cs)
-{
-	unsigned long flags;
-	int i;
-
-	spin_lock_irqsave(&cs->lock, flags);
-	if (!try_module_get(cs->driver->owner)) {
-		gig_dbg(DEBUG_CHANNEL,
-			"could not get module for allocating channel");
-		spin_unlock_irqrestore(&cs->lock, flags);
-		return NULL;
-	}
-	for (i = 0; i < cs->channels; ++i)
-		if (!cs->bcs[i].use_count) {
-			++cs->bcs[i].use_count;
-			cs->bcs[i].busy = 1;
-			spin_unlock_irqrestore(&cs->lock, flags);
-			gig_dbg(DEBUG_CHANNEL, "allocated channel %d", i);
-			return cs->bcs + i;
-		}
-	module_put(cs->driver->owner);
-	spin_unlock_irqrestore(&cs->lock, flags);
-	gig_dbg(DEBUG_CHANNEL, "no free channel");
-	return NULL;
-}
-
-void gigaset_free_channel(struct bc_state *bcs)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&bcs->cs->lock, flags);
-	if (!bcs->busy) {
-		gig_dbg(DEBUG_CHANNEL, "could not free channel %d",
-			bcs->channel);
-		spin_unlock_irqrestore(&bcs->cs->lock, flags);
-		return;
-	}
-	--bcs->use_count;
-	bcs->busy = 0;
-	module_put(bcs->cs->driver->owner);
-	gig_dbg(DEBUG_CHANNEL, "freed channel %d", bcs->channel);
-	spin_unlock_irqrestore(&bcs->cs->lock, flags);
-}
-
-int gigaset_get_channels(struct cardstate *cs)
-{
-	unsigned long flags;
-	int i;
-
-	spin_lock_irqsave(&cs->lock, flags);
-	for (i = 0; i < cs->channels; ++i)
-		if (cs->bcs[i].use_count) {
-			spin_unlock_irqrestore(&cs->lock, flags);
-			gig_dbg(DEBUG_CHANNEL,
-				"could not allocate all channels");
-			return -EBUSY;
-		}
-	for (i = 0; i < cs->channels; ++i)
-		++cs->bcs[i].use_count;
-	spin_unlock_irqrestore(&cs->lock, flags);
-
-	gig_dbg(DEBUG_CHANNEL, "allocated all channels");
-
-	return 0;
-}
-
-void gigaset_free_channels(struct cardstate *cs)
-{
-	unsigned long flags;
-	int i;
-
-	gig_dbg(DEBUG_CHANNEL, "unblocking all channels");
-	spin_lock_irqsave(&cs->lock, flags);
-	for (i = 0; i < cs->channels; ++i)
-		--cs->bcs[i].use_count;
-	spin_unlock_irqrestore(&cs->lock, flags);
-}
-
-void gigaset_block_channels(struct cardstate *cs)
-{
-	unsigned long flags;
-	int i;
-
-	gig_dbg(DEBUG_CHANNEL, "blocking all channels");
-	spin_lock_irqsave(&cs->lock, flags);
-	for (i = 0; i < cs->channels; ++i)
-		++cs->bcs[i].use_count;
-	spin_unlock_irqrestore(&cs->lock, flags);
-}
-
-static void clear_events(struct cardstate *cs)
-{
-	struct event_t *ev;
-	unsigned head, tail;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cs->ev_lock, flags);
-
-	head = cs->ev_head;
-	tail = cs->ev_tail;
-
-	while (tail != head) {
-		ev = cs->events + head;
-		kfree(ev->ptr);
-		head = (head + 1) % MAX_EVENTS;
-	}
-
-	cs->ev_head = tail;
-
-	spin_unlock_irqrestore(&cs->ev_lock, flags);
-}
-
-/**
- * gigaset_add_event() - add event to device event queue
- * @cs:		device descriptor structure.
- * @at_state:	connection state structure.
- * @type:	event type.
- * @ptr:	pointer parameter for event.
- * @parameter:	integer parameter for event.
- * @arg:	pointer parameter for event.
- *
- * Allocate an event queue entry from the device's event queue, and set it up
- * with the parameters given.
- *
- * Return value: added event
- */
-struct event_t *gigaset_add_event(struct cardstate *cs,
-				  struct at_state_t *at_state, int type,
-				  void *ptr, int parameter, void *arg)
-{
-	unsigned long flags;
-	unsigned next, tail;
-	struct event_t *event = NULL;
-
-	gig_dbg(DEBUG_EVENT, "queueing event %d", type);
-
-	spin_lock_irqsave(&cs->ev_lock, flags);
-
-	tail = cs->ev_tail;
-	next = (tail + 1) % MAX_EVENTS;
-	if (unlikely(next == cs->ev_head))
-		dev_err(cs->dev, "event queue full\n");
-	else {
-		event = cs->events + tail;
-		event->type = type;
-		event->at_state = at_state;
-		event->cid = -1;
-		event->ptr = ptr;
-		event->arg = arg;
-		event->parameter = parameter;
-		cs->ev_tail = next;
-	}
-
-	spin_unlock_irqrestore(&cs->ev_lock, flags);
-
-	return event;
-}
-EXPORT_SYMBOL_GPL(gigaset_add_event);
-
-static void clear_at_state(struct at_state_t *at_state)
-{
-	int i;
-
-	for (i = 0; i < STR_NUM; ++i) {
-		kfree(at_state->str_var[i]);
-		at_state->str_var[i] = NULL;
-	}
-}
-
-static void dealloc_temp_at_states(struct cardstate *cs)
-{
-	struct at_state_t *cur, *next;
-
-	list_for_each_entry_safe(cur, next, &cs->temp_at_states, list) {
-		list_del(&cur->list);
-		clear_at_state(cur);
-		kfree(cur);
-	}
-}
-
-static void gigaset_freebcs(struct bc_state *bcs)
-{
-	int i;
-
-	gig_dbg(DEBUG_INIT, "freeing bcs[%d]->hw", bcs->channel);
-	bcs->cs->ops->freebcshw(bcs);
-
-	gig_dbg(DEBUG_INIT, "clearing bcs[%d]->at_state", bcs->channel);
-	clear_at_state(&bcs->at_state);
-	gig_dbg(DEBUG_INIT, "freeing bcs[%d]->skb", bcs->channel);
-	dev_kfree_skb(bcs->rx_skb);
-	bcs->rx_skb = NULL;
-
-	for (i = 0; i < AT_NUM; ++i) {
-		kfree(bcs->commands[i]);
-		bcs->commands[i] = NULL;
-	}
-}
-
-static struct cardstate *alloc_cs(struct gigaset_driver *drv)
-{
-	unsigned long flags;
-	unsigned i;
-	struct cardstate *cs;
-	struct cardstate *ret = NULL;
-
-	spin_lock_irqsave(&drv->lock, flags);
-	if (drv->blocked)
-		goto exit;
-	for (i = 0; i < drv->minors; ++i) {
-		cs = drv->cs + i;
-		if (!(cs->flags & VALID_MINOR)) {
-			cs->flags = VALID_MINOR;
-			ret = cs;
-			break;
-		}
-	}
-exit:
-	spin_unlock_irqrestore(&drv->lock, flags);
-	return ret;
-}
-
-static void free_cs(struct cardstate *cs)
-{
-	cs->flags = 0;
-}
-
-static void make_valid(struct cardstate *cs, unsigned mask)
-{
-	unsigned long flags;
-	struct gigaset_driver *drv = cs->driver;
-	spin_lock_irqsave(&drv->lock, flags);
-	cs->flags |= mask;
-	spin_unlock_irqrestore(&drv->lock, flags);
-}
-
-static void make_invalid(struct cardstate *cs, unsigned mask)
-{
-	unsigned long flags;
-	struct gigaset_driver *drv = cs->driver;
-	spin_lock_irqsave(&drv->lock, flags);
-	cs->flags &= ~mask;
-	spin_unlock_irqrestore(&drv->lock, flags);
-}
-
-/**
- * gigaset_freecs() - free all associated ressources of a device
- * @cs:		device descriptor structure.
- *
- * Stops all tasklets and timers, unregisters the device from all
- * subsystems it was registered to, deallocates the device structure
- * @cs and all structures referenced from it.
- * Operations on the device should be stopped before calling this.
- */
-void gigaset_freecs(struct cardstate *cs)
-{
-	int i;
-	unsigned long flags;
-
-	if (!cs)
-		return;
-
-	mutex_lock(&cs->mutex);
-
-	spin_lock_irqsave(&cs->lock, flags);
-	cs->running = 0;
-	spin_unlock_irqrestore(&cs->lock, flags); /* event handler and timer are
-						     not rescheduled below */
-
-	tasklet_kill(&cs->event_tasklet);
-	del_timer_sync(&cs->timer);
-
-	switch (cs->cs_init) {
-	default:
-		/* clear B channel structures */
-		for (i = 0; i < cs->channels; ++i) {
-			gig_dbg(DEBUG_INIT, "clearing bcs[%d]", i);
-			gigaset_freebcs(cs->bcs + i);
-		}
-
-		/* clear device sysfs */
-		gigaset_free_dev_sysfs(cs);
-
-		gigaset_if_free(cs);
-
-		gig_dbg(DEBUG_INIT, "clearing hw");
-		cs->ops->freecshw(cs);
-
-		/* fall through */
-	case 2: /* error in initcshw */
-		/* Deregister from LL */
-		make_invalid(cs, VALID_ID);
-		gigaset_isdn_unregdev(cs);
-
-		/* fall through */
-	case 1: /* error when registering to LL */
-		gig_dbg(DEBUG_INIT, "clearing at_state");
-		clear_at_state(&cs->at_state);
-		dealloc_temp_at_states(cs);
-		clear_events(cs);
-		tty_port_destroy(&cs->port);
-
-		/* fall through */
-	case 0:	/* error in basic setup */
-		gig_dbg(DEBUG_INIT, "freeing inbuf");
-		kfree(cs->inbuf);
-		kfree(cs->bcs);
-	}
-
-	mutex_unlock(&cs->mutex);
-	free_cs(cs);
-}
-EXPORT_SYMBOL_GPL(gigaset_freecs);
-
-void gigaset_at_init(struct at_state_t *at_state, struct bc_state *bcs,
-		     struct cardstate *cs, int cid)
-{
-	int i;
-
-	INIT_LIST_HEAD(&at_state->list);
-	at_state->waiting = 0;
-	at_state->getstring = 0;
-	at_state->pending_commands = 0;
-	at_state->timer_expires = 0;
-	at_state->timer_active = 0;
-	at_state->timer_index = 0;
-	at_state->seq_index = 0;
-	at_state->ConState = 0;
-	for (i = 0; i < STR_NUM; ++i)
-		at_state->str_var[i] = NULL;
-	at_state->int_var[VAR_ZDLE] = 0;
-	at_state->int_var[VAR_ZCTP] = -1;
-	at_state->int_var[VAR_ZSAU] = ZSAU_NULL;
-	at_state->cs = cs;
-	at_state->bcs = bcs;
-	at_state->cid = cid;
-	if (!cid)
-		at_state->replystruct = cs->tabnocid;
-	else
-		at_state->replystruct = cs->tabcid;
-}
-
-
-static void gigaset_inbuf_init(struct inbuf_t *inbuf, struct cardstate *cs)
-/* inbuf->read must be allocated before! */
-{
-	inbuf->head = 0;
-	inbuf->tail = 0;
-	inbuf->cs = cs;
-	inbuf->inputstate = INS_command;
-}
-
-/**
- * gigaset_fill_inbuf() - append received data to input buffer
- * @inbuf:	buffer structure.
- * @src:	received data.
- * @numbytes:	number of bytes received.
- *
- * Return value: !=0 if some data was appended
- */
-int gigaset_fill_inbuf(struct inbuf_t *inbuf, const unsigned char *src,
-		       unsigned numbytes)
-{
-	unsigned n, head, tail, bytesleft;
-
-	gig_dbg(DEBUG_INTR, "received %u bytes", numbytes);
-
-	if (!numbytes)
-		return 0;
-
-	bytesleft = numbytes;
-	tail = inbuf->tail;
-	head = inbuf->head;
-	gig_dbg(DEBUG_INTR, "buffer state: %u -> %u", head, tail);
-
-	while (bytesleft) {
-		if (head > tail)
-			n = head - 1 - tail;
-		else if (head == 0)
-			n = (RBUFSIZE - 1) - tail;
-		else
-			n = RBUFSIZE - tail;
-		if (!n) {
-			dev_err(inbuf->cs->dev,
-				"buffer overflow (%u bytes lost)\n",
-				bytesleft);
-			break;
-		}
-		if (n > bytesleft)
-			n = bytesleft;
-		memcpy(inbuf->data + tail, src, n);
-		bytesleft -= n;
-		tail = (tail + n) % RBUFSIZE;
-		src += n;
-	}
-	gig_dbg(DEBUG_INTR, "setting tail to %u", tail);
-	inbuf->tail = tail;
-	return numbytes != bytesleft;
-}
-EXPORT_SYMBOL_GPL(gigaset_fill_inbuf);
-
-/* Initialize the b-channel structure */
-static int gigaset_initbcs(struct bc_state *bcs, struct cardstate *cs,
-			   int channel)
-{
-	int i;
-
-	bcs->tx_skb = NULL;
-
-	skb_queue_head_init(&bcs->squeue);
-
-	bcs->corrupted = 0;
-	bcs->trans_down = 0;
-	bcs->trans_up = 0;
-
-	gig_dbg(DEBUG_INIT, "setting up bcs[%d]->at_state", channel);
-	gigaset_at_init(&bcs->at_state, bcs, cs, -1);
-
-#ifdef CONFIG_GIGASET_DEBUG
-	bcs->emptycount = 0;
-#endif
-
-	bcs->rx_bufsize = 0;
-	bcs->rx_skb = NULL;
-	bcs->rx_fcs = PPP_INITFCS;
-	bcs->inputstate = 0;
-	bcs->channel = channel;
-	bcs->cs = cs;
-
-	bcs->chstate = 0;
-	bcs->use_count = 1;
-	bcs->busy = 0;
-	bcs->ignore = cs->ignoreframes;
-
-	for (i = 0; i < AT_NUM; ++i)
-		bcs->commands[i] = NULL;
-
-	spin_lock_init(&bcs->aplock);
-	bcs->ap = NULL;
-	bcs->apconnstate = 0;
-
-	gig_dbg(DEBUG_INIT, "  setting up bcs[%d]->hw", channel);
-	return cs->ops->initbcshw(bcs);
-}
-
-/**
- * gigaset_initcs() - initialize device structure
- * @drv:	hardware driver the device belongs to
- * @channels:	number of B channels supported by device
- * @onechannel:	!=0 if B channel data and AT commands share one
- *		    communication channel (M10x),
- *		==0 if B channels have separate communication channels (base)
- * @ignoreframes:	number of frames to ignore after setting up B channel
- * @cidmode:	!=0: start in CallID mode
- * @modulename:	name of driver module for LL registration
- *
- * Allocate and initialize cardstate structure for Gigaset driver
- * Calls hardware dependent gigaset_initcshw() function
- * Calls B channel initialization function gigaset_initbcs() for each B channel
- *
- * Return value:
- *	pointer to cardstate structure
- */
-struct cardstate *gigaset_initcs(struct gigaset_driver *drv, int channels,
-				 int onechannel, int ignoreframes,
-				 int cidmode, const char *modulename)
-{
-	struct cardstate *cs;
-	unsigned long flags;
-	int i;
-
-	gig_dbg(DEBUG_INIT, "allocating cs");
-	cs = alloc_cs(drv);
-	if (!cs) {
-		pr_err("maximum number of devices exceeded\n");
-		return NULL;
-	}
-
-	cs->cs_init = 0;
-	cs->channels = channels;
-	cs->onechannel = onechannel;
-	cs->ignoreframes = ignoreframes;
-	INIT_LIST_HEAD(&cs->temp_at_states);
-	cs->running = 0;
-	timer_setup(&cs->timer, timer_tick, 0);
-	spin_lock_init(&cs->ev_lock);
-	cs->ev_tail = 0;
-	cs->ev_head = 0;
-
-	tasklet_init(&cs->event_tasklet, gigaset_handle_event,
-		     (unsigned long) cs);
-	tty_port_init(&cs->port);
-	cs->commands_pending = 0;
-	cs->cur_at_seq = 0;
-	cs->gotfwver = -1;
-	cs->dev = NULL;
-	cs->tty_dev = NULL;
-	cs->cidmode = cidmode != 0;
-	cs->tabnocid = gigaset_tab_nocid;
-	cs->tabcid = gigaset_tab_cid;
-
-	init_waitqueue_head(&cs->waitqueue);
-	cs->waiting = 0;
-
-	cs->mode = M_UNKNOWN;
-	cs->mstate = MS_UNINITIALIZED;
-
-	cs->bcs = kmalloc_array(channels, sizeof(struct bc_state), GFP_KERNEL);
-	cs->inbuf = kmalloc(sizeof(struct inbuf_t), GFP_KERNEL);
-	if (!cs->bcs || !cs->inbuf) {
-		pr_err("out of memory\n");
-		goto error;
-	}
-	++cs->cs_init;
-
-	gig_dbg(DEBUG_INIT, "setting up at_state");
-	spin_lock_init(&cs->lock);
-	gigaset_at_init(&cs->at_state, NULL, cs, 0);
-	cs->dle = 0;
-	cs->cbytes = 0;
-
-	gig_dbg(DEBUG_INIT, "setting up inbuf");
-	gigaset_inbuf_init(cs->inbuf, cs);
-
-	cs->connected = 0;
-	cs->isdn_up = 0;
-
-	gig_dbg(DEBUG_INIT, "setting up cmdbuf");
-	cs->cmdbuf = cs->lastcmdbuf = NULL;
-	spin_lock_init(&cs->cmdlock);
-	cs->curlen = 0;
-	cs->cmdbytes = 0;
-
-	gig_dbg(DEBUG_INIT, "setting up iif");
-	if (gigaset_isdn_regdev(cs, modulename) < 0) {
-		pr_err("error registering ISDN device\n");
-		goto error;
-	}
-
-	make_valid(cs, VALID_ID);
-	++cs->cs_init;
-	gig_dbg(DEBUG_INIT, "setting up hw");
-	if (cs->ops->initcshw(cs) < 0)
-		goto error;
-
-	++cs->cs_init;
-
-	/* set up character device */
-	gigaset_if_init(cs);
-
-	/* set up device sysfs */
-	gigaset_init_dev_sysfs(cs);
-
-	/* set up channel data structures */
-	for (i = 0; i < channels; ++i) {
-		gig_dbg(DEBUG_INIT, "setting up bcs[%d]", i);
-		if (gigaset_initbcs(cs->bcs + i, cs, i) < 0) {
-			pr_err("could not allocate channel %d data\n", i);
-			goto error;
-		}
-	}
-
-	spin_lock_irqsave(&cs->lock, flags);
-	cs->running = 1;
-	spin_unlock_irqrestore(&cs->lock, flags);
-	cs->timer.expires = jiffies + msecs_to_jiffies(GIG_TICK);
-	add_timer(&cs->timer);
-
-	gig_dbg(DEBUG_INIT, "cs initialized");
-	return cs;
-
-error:
-	gig_dbg(DEBUG_INIT, "failed");
-	gigaset_freecs(cs);
-	return NULL;
-}
-EXPORT_SYMBOL_GPL(gigaset_initcs);
-
-/* ReInitialize the b-channel structure on hangup */
-void gigaset_bcs_reinit(struct bc_state *bcs)
-{
-	struct sk_buff *skb;
-	struct cardstate *cs = bcs->cs;
-	unsigned long flags;
-
-	while ((skb = skb_dequeue(&bcs->squeue)) != NULL)
-		dev_kfree_skb(skb);
-
-	spin_lock_irqsave(&cs->lock, flags);
-	clear_at_state(&bcs->at_state);
-	bcs->at_state.ConState = 0;
-	bcs->at_state.timer_active = 0;
-	bcs->at_state.timer_expires = 0;
-	bcs->at_state.cid = -1;			/* No CID defined */
-	spin_unlock_irqrestore(&cs->lock, flags);
-
-	bcs->inputstate = 0;
-
-#ifdef CONFIG_GIGASET_DEBUG
-	bcs->emptycount = 0;
-#endif
-
-	bcs->rx_fcs = PPP_INITFCS;
-	bcs->chstate = 0;
-
-	bcs->ignore = cs->ignoreframes;
-	dev_kfree_skb(bcs->rx_skb);
-	bcs->rx_skb = NULL;
-
-	cs->ops->reinitbcshw(bcs);
-}
-
-static void cleanup_cs(struct cardstate *cs)
-{
-	struct cmdbuf_t *cb, *tcb;
-	int i;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cs->lock, flags);
-
-	cs->mode = M_UNKNOWN;
-	cs->mstate = MS_UNINITIALIZED;
-
-	clear_at_state(&cs->at_state);
-	dealloc_temp_at_states(cs);
-	gigaset_at_init(&cs->at_state, NULL, cs, 0);
-
-	cs->inbuf->inputstate = INS_command;
-	cs->inbuf->head = 0;
-	cs->inbuf->tail = 0;
-
-	cb = cs->cmdbuf;
-	while (cb) {
-		tcb = cb;
-		cb = cb->next;
-		kfree(tcb);
-	}
-	cs->cmdbuf = cs->lastcmdbuf = NULL;
-	cs->curlen = 0;
-	cs->cmdbytes = 0;
-	cs->gotfwver = -1;
-	cs->dle = 0;
-	cs->cur_at_seq = 0;
-	cs->commands_pending = 0;
-	cs->cbytes = 0;
-
-	spin_unlock_irqrestore(&cs->lock, flags);
-
-	for (i = 0; i < cs->channels; ++i) {
-		gigaset_freebcs(cs->bcs + i);
-		if (gigaset_initbcs(cs->bcs + i, cs, i) < 0)
-			pr_err("could not allocate channel %d data\n", i);
-	}
-
-	if (cs->waiting) {
-		cs->cmd_result = -ENODEV;
-		cs->waiting = 0;
-		wake_up_interruptible(&cs->waitqueue);
-	}
-}
-
-
-/**
- * gigaset_start() - start device operations
- * @cs:		device descriptor structure.
- *
- * Prepares the device for use by setting up communication parameters,
- * scheduling an EV_START event to initiate device initialization, and
- * waiting for completion of the initialization.
- *
- * Return value:
- *	0 on success, error code < 0 on failure
- */
-int gigaset_start(struct cardstate *cs)
-{
-	unsigned long flags;
-
-	if (mutex_lock_interruptible(&cs->mutex))
-		return -EBUSY;
-
-	spin_lock_irqsave(&cs->lock, flags);
-	cs->connected = 1;
-	spin_unlock_irqrestore(&cs->lock, flags);
-
-	if (cs->mstate != MS_LOCKED) {
-		cs->ops->set_modem_ctrl(cs, 0, TIOCM_DTR | TIOCM_RTS);
-		cs->ops->baud_rate(cs, B115200);
-		cs->ops->set_line_ctrl(cs, CS8);
-		cs->control_state = TIOCM_DTR | TIOCM_RTS;
-	}
-
-	cs->waiting = 1;
-
-	if (!gigaset_add_event(cs, &cs->at_state, EV_START, NULL, 0, NULL)) {
-		cs->waiting = 0;
-		goto error;
-	}
-	gigaset_schedule_event(cs);
-
-	wait_event(cs->waitqueue, !cs->waiting);
-
-	mutex_unlock(&cs->mutex);
-	return 0;
-
-error:
-	mutex_unlock(&cs->mutex);
-	return -ENOMEM;
-}
-EXPORT_SYMBOL_GPL(gigaset_start);
-
-/**
- * gigaset_shutdown() - shut down device operations
- * @cs:		device descriptor structure.
- *
- * Deactivates the device by scheduling an EV_SHUTDOWN event and
- * waiting for completion of the shutdown.
- *
- * Return value:
- *	0 - success, -ENODEV - error (no device associated)
- */
-int gigaset_shutdown(struct cardstate *cs)
-{
-	mutex_lock(&cs->mutex);
-
-	if (!(cs->flags & VALID_MINOR)) {
-		mutex_unlock(&cs->mutex);
-		return -ENODEV;
-	}
-
-	cs->waiting = 1;
-
-	if (!gigaset_add_event(cs, &cs->at_state, EV_SHUTDOWN, NULL, 0, NULL))
-		goto exit;
-	gigaset_schedule_event(cs);
-
-	wait_event(cs->waitqueue, !cs->waiting);
-
-	cleanup_cs(cs);
-
-exit:
-	mutex_unlock(&cs->mutex);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(gigaset_shutdown);
-
-/**
- * gigaset_stop() - stop device operations
- * @cs:		device descriptor structure.
- *
- * Stops operations on the device by scheduling an EV_STOP event and
- * waiting for completion of the shutdown.
- */
-void gigaset_stop(struct cardstate *cs)
-{
-	mutex_lock(&cs->mutex);
-
-	cs->waiting = 1;
-
-	if (!gigaset_add_event(cs, &cs->at_state, EV_STOP, NULL, 0, NULL))
-		goto exit;
-	gigaset_schedule_event(cs);
-
-	wait_event(cs->waitqueue, !cs->waiting);
-
-	cleanup_cs(cs);
-
-exit:
-	mutex_unlock(&cs->mutex);
-}
-EXPORT_SYMBOL_GPL(gigaset_stop);
-
-static LIST_HEAD(drivers);
-static DEFINE_SPINLOCK(driver_lock);
-
-struct cardstate *gigaset_get_cs_by_id(int id)
-{
-	unsigned long flags;
-	struct cardstate *ret = NULL;
-	struct cardstate *cs;
-	struct gigaset_driver *drv;
-	unsigned i;
-
-	spin_lock_irqsave(&driver_lock, flags);
-	list_for_each_entry(drv, &drivers, list) {
-		spin_lock(&drv->lock);
-		for (i = 0; i < drv->minors; ++i) {
-			cs = drv->cs + i;
-			if ((cs->flags & VALID_ID) && cs->myid == id) {
-				ret = cs;
-				break;
-			}
-		}
-		spin_unlock(&drv->lock);
-		if (ret)
-			break;
-	}
-	spin_unlock_irqrestore(&driver_lock, flags);
-	return ret;
-}
-
-static struct cardstate *gigaset_get_cs_by_minor(unsigned minor)
-{
-	unsigned long flags;
-	struct cardstate *ret = NULL;
-	struct gigaset_driver *drv;
-	unsigned index;
-
-	spin_lock_irqsave(&driver_lock, flags);
-	list_for_each_entry(drv, &drivers, list) {
-		if (minor < drv->minor || minor >= drv->minor + drv->minors)
-			continue;
-		index = minor - drv->minor;
-		spin_lock(&drv->lock);
-		if (drv->cs[index].flags & VALID_MINOR)
-			ret = drv->cs + index;
-		spin_unlock(&drv->lock);
-		if (ret)
-			break;
-	}
-	spin_unlock_irqrestore(&driver_lock, flags);
-	return ret;
-}
-
-struct cardstate *gigaset_get_cs_by_tty(struct tty_struct *tty)
-{
-	return gigaset_get_cs_by_minor(tty->index + tty->driver->minor_start);
-}
-
-/**
- * gigaset_freedriver() - free all associated ressources of a driver
- * @drv:	driver descriptor structure.
- *
- * Unregisters the driver from the system and deallocates the driver
- * structure @drv and all structures referenced from it.
- * All devices should be shut down before calling this.
- */
-void gigaset_freedriver(struct gigaset_driver *drv)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&driver_lock, flags);
-	list_del(&drv->list);
-	spin_unlock_irqrestore(&driver_lock, flags);
-
-	gigaset_if_freedriver(drv);
-
-	kfree(drv->cs);
-	kfree(drv);
-}
-EXPORT_SYMBOL_GPL(gigaset_freedriver);
-
-/**
- * gigaset_initdriver() - initialize driver structure
- * @minor:	First minor number
- * @minors:	Number of minors this driver can handle
- * @procname:	Name of the driver
- * @devname:	Name of the device files (prefix without minor number)
- *
- * Allocate and initialize gigaset_driver structure. Initialize interface.
- *
- * Return value:
- *	Pointer to the gigaset_driver structure on success, NULL on failure.
- */
-struct gigaset_driver *gigaset_initdriver(unsigned minor, unsigned minors,
-					  const char *procname,
-					  const char *devname,
-					  const struct gigaset_ops *ops,
-					  struct module *owner)
-{
-	struct gigaset_driver *drv;
-	unsigned long flags;
-	unsigned i;
-
-	drv = kmalloc(sizeof *drv, GFP_KERNEL);
-	if (!drv)
-		return NULL;
-
-	drv->have_tty = 0;
-	drv->minor = minor;
-	drv->minors = minors;
-	spin_lock_init(&drv->lock);
-	drv->blocked = 0;
-	drv->ops = ops;
-	drv->owner = owner;
-	INIT_LIST_HEAD(&drv->list);
-
-	drv->cs = kmalloc_array(minors, sizeof(*drv->cs), GFP_KERNEL);
-	if (!drv->cs)
-		goto error;
-
-	for (i = 0; i < minors; ++i) {
-		drv->cs[i].flags = 0;
-		drv->cs[i].driver = drv;
-		drv->cs[i].ops = drv->ops;
-		drv->cs[i].minor_index = i;
-		mutex_init(&drv->cs[i].mutex);
-	}
-
-	gigaset_if_initdriver(drv, procname, devname);
-
-	spin_lock_irqsave(&driver_lock, flags);
-	list_add(&drv->list, &drivers);
-	spin_unlock_irqrestore(&driver_lock, flags);
-
-	return drv;
-
-error:
-	kfree(drv);
-	return NULL;
-}
-EXPORT_SYMBOL_GPL(gigaset_initdriver);
-
-/**
- * gigaset_blockdriver() - block driver
- * @drv:	driver descriptor structure.
- *
- * Prevents the driver from attaching new devices, in preparation for
- * deregistration.
- */
-void gigaset_blockdriver(struct gigaset_driver *drv)
-{
-	drv->blocked = 1;
-}
-EXPORT_SYMBOL_GPL(gigaset_blockdriver);
-
-static int __init gigaset_init_module(void)
-{
-	/* in accordance with the principle of least astonishment,
-	 * setting the 'debug' parameter to 1 activates a sensible
-	 * set of default debug levels
-	 */
-	if (gigaset_debuglevel == 1)
-		gigaset_debuglevel = DEBUG_DEFAULT;
-
-	pr_info(DRIVER_DESC DRIVER_DESC_DEBUG "\n");
-	gigaset_isdn_regdrv();
-	return 0;
-}
-
-static void __exit gigaset_exit_module(void)
-{
-	gigaset_isdn_unregdrv();
-}
-
-module_init(gigaset_init_module);
-module_exit(gigaset_exit_module);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/isdn/gigaset/dummyll.c b/drivers/staging/isdn/gigaset/dummyll.c
deleted file mode 100644
index 4b9637e5da6e..000000000000
--- a/drivers/staging/isdn/gigaset/dummyll.c
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Dummy LL interface for the Gigaset driver
- *
- * Copyright (c) 2009 by Tilman Schmidt <tilman@imap.cc>.
- *
- * =====================================================================
- * =====================================================================
- */
-
-#include <linux/export.h>
-#include "gigaset.h"
-
-void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb)
-{
-}
-EXPORT_SYMBOL_GPL(gigaset_skb_sent);
-
-void gigaset_skb_rcvd(struct bc_state *bcs, struct sk_buff *skb)
-{
-}
-EXPORT_SYMBOL_GPL(gigaset_skb_rcvd);
-
-void gigaset_isdn_rcv_err(struct bc_state *bcs)
-{
-}
-EXPORT_SYMBOL_GPL(gigaset_isdn_rcv_err);
-
-int gigaset_isdn_icall(struct at_state_t *at_state)
-{
-	return ICALL_IGNORE;
-}
-
-void gigaset_isdn_connD(struct bc_state *bcs)
-{
-}
-
-void gigaset_isdn_hupD(struct bc_state *bcs)
-{
-}
-
-void gigaset_isdn_connB(struct bc_state *bcs)
-{
-}
-
-void gigaset_isdn_hupB(struct bc_state *bcs)
-{
-}
-
-void gigaset_isdn_start(struct cardstate *cs)
-{
-}
-
-void gigaset_isdn_stop(struct cardstate *cs)
-{
-}
-
-int gigaset_isdn_regdev(struct cardstate *cs, const char *isdnid)
-{
-	return 0;
-}
-
-void gigaset_isdn_unregdev(struct cardstate *cs)
-{
-}
-
-void gigaset_isdn_regdrv(void)
-{
-	pr_info("no ISDN subsystem interface\n");
-}
-
-void gigaset_isdn_unregdrv(void)
-{
-}
diff --git a/drivers/staging/isdn/gigaset/ev-layer.c b/drivers/staging/isdn/gigaset/ev-layer.c
deleted file mode 100644
index f8bb1869c600..000000000000
--- a/drivers/staging/isdn/gigaset/ev-layer.c
+++ /dev/null
@@ -1,1910 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Stuff used by all variants of the driver
- *
- * Copyright (c) 2001 by Stefan Eilers,
- *                       Hansjoerg Lipp <hjlipp@web.de>,
- *                       Tilman Schmidt <tilman@imap.cc>.
- *
- * =====================================================================
- * =====================================================================
- */
-
-#include <linux/export.h>
-#include "gigaset.h"
-
-/* ========================================================== */
-/* bit masks for pending commands */
-#define PC_DIAL		0x001
-#define PC_HUP		0x002
-#define PC_INIT		0x004
-#define PC_DLE0		0x008
-#define PC_DLE1		0x010
-#define PC_SHUTDOWN	0x020
-#define PC_ACCEPT	0x040
-#define PC_CID		0x080
-#define PC_NOCID	0x100
-#define PC_CIDMODE	0x200
-#define PC_UMMODE	0x400
-
-/* types of modem responses */
-#define RT_NOTHING	0
-#define RT_ZSAU		1
-#define RT_RING		2
-#define RT_NUMBER	3
-#define RT_STRING	4
-#define RT_ZCAU		6
-
-/* Possible ASCII responses */
-#define RSP_OK		0
-#define RSP_ERROR	1
-#define RSP_ZGCI	3
-#define RSP_RING	4
-#define RSP_ZVLS	5
-#define RSP_ZCAU	6
-
-/* responses with values to store in at_state */
-/* - numeric */
-#define RSP_VAR		100
-#define RSP_ZSAU	(RSP_VAR + VAR_ZSAU)
-#define RSP_ZDLE	(RSP_VAR + VAR_ZDLE)
-#define RSP_ZCTP	(RSP_VAR + VAR_ZCTP)
-/* - string */
-#define RSP_STR		(RSP_VAR + VAR_NUM)
-#define RSP_NMBR	(RSP_STR + STR_NMBR)
-#define RSP_ZCPN	(RSP_STR + STR_ZCPN)
-#define RSP_ZCON	(RSP_STR + STR_ZCON)
-#define RSP_ZBC		(RSP_STR + STR_ZBC)
-#define RSP_ZHLC	(RSP_STR + STR_ZHLC)
-
-#define RSP_WRONG_CID	-2	/* unknown cid in cmd */
-#define RSP_INVAL	-6	/* invalid response   */
-#define RSP_NODEV	-9	/* device not connected */
-
-#define RSP_NONE	-19
-#define RSP_STRING	-20
-#define RSP_NULL	-21
-#define RSP_INIT	-27
-#define RSP_ANY		-26
-#define RSP_LAST	-28
-
-/* actions for process_response */
-#define ACT_NOTHING		0
-#define ACT_SETDLE1		1
-#define ACT_SETDLE0		2
-#define ACT_FAILINIT		3
-#define ACT_HUPMODEM		4
-#define ACT_CONFIGMODE		5
-#define ACT_INIT		6
-#define ACT_DLE0		7
-#define ACT_DLE1		8
-#define ACT_FAILDLE0		9
-#define ACT_FAILDLE1		10
-#define ACT_RING		11
-#define ACT_CID			12
-#define ACT_FAILCID		13
-#define ACT_SDOWN		14
-#define ACT_FAILSDOWN		15
-#define ACT_DEBUG		16
-#define ACT_WARN		17
-#define ACT_DIALING		18
-#define ACT_ABORTDIAL		19
-#define ACT_DISCONNECT		20
-#define ACT_CONNECT		21
-#define ACT_REMOTEREJECT	22
-#define ACT_CONNTIMEOUT		23
-#define ACT_REMOTEHUP		24
-#define ACT_ABORTHUP		25
-#define ACT_ICALL		26
-#define ACT_ACCEPTED		27
-#define ACT_ABORTACCEPT		28
-#define ACT_TIMEOUT		29
-#define ACT_GETSTRING		30
-#define ACT_SETVER		31
-#define ACT_FAILVER		32
-#define ACT_GOTVER		33
-#define ACT_TEST		34
-#define ACT_ERROR		35
-#define ACT_ABORTCID		36
-#define ACT_ZCAU		37
-#define ACT_NOTIFY_BC_DOWN	38
-#define ACT_NOTIFY_BC_UP	39
-#define ACT_DIAL		40
-#define ACT_ACCEPT		41
-#define ACT_HUP			43
-#define ACT_IF_LOCK		44
-#define ACT_START		45
-#define ACT_STOP		46
-#define ACT_FAKEDLE0		47
-#define ACT_FAKEHUP		48
-#define ACT_FAKESDOWN		49
-#define ACT_SHUTDOWN		50
-#define ACT_PROC_CIDMODE	51
-#define ACT_UMODESET		52
-#define ACT_FAILUMODE		53
-#define ACT_CMODESET		54
-#define ACT_FAILCMODE		55
-#define ACT_IF_VER		56
-#define ACT_CMD			100
-
-/* at command sequences */
-#define SEQ_NONE	0
-#define SEQ_INIT	100
-#define SEQ_DLE0	200
-#define SEQ_DLE1	250
-#define SEQ_CID		300
-#define SEQ_NOCID	350
-#define SEQ_HUP		400
-#define SEQ_DIAL	600
-#define SEQ_ACCEPT	720
-#define SEQ_SHUTDOWN	500
-#define SEQ_CIDMODE	10
-#define SEQ_UMMODE	11
-
-
-/* 100: init, 200: dle0, 250:dle1, 300: get cid (dial), 350: "hup" (no cid),
- * 400: hup, 500: reset, 600: dial, 700: ring */
-struct reply_t gigaset_tab_nocid[] =
-{
-/* resp_code, min_ConState, max_ConState, parameter, new_ConState, timeout,
- * action, command */
-
-/* initialize device, set cid mode if possible */
-	{RSP_INIT,	 -1,  -1, SEQ_INIT,	100,  1, {ACT_TIMEOUT} },
-
-	{EV_TIMEOUT,	100, 100, -1,		101,  3, {0},	"Z\r"},
-	{RSP_OK,	101, 103, -1,		120,  5, {ACT_GETSTRING},
-								"+GMR\r"},
-
-	{EV_TIMEOUT,	101, 101, -1,		102,  5, {0},	"Z\r"},
-	{RSP_ERROR,	101, 101, -1,		102,  5, {0},	"Z\r"},
-
-	{EV_TIMEOUT,	102, 102, -1,		108,  5, {ACT_SETDLE1},
-								"^SDLE=0\r"},
-	{RSP_OK,	108, 108, -1,		104, -1},
-	{RSP_ZDLE,	104, 104,  0,		103,  5, {0},	"Z\r"},
-	{EV_TIMEOUT,	104, 104, -1,		  0,  0, {ACT_FAILINIT} },
-	{RSP_ERROR,	108, 108, -1,		  0,  0, {ACT_FAILINIT} },
-
-	{EV_TIMEOUT,	108, 108, -1,		105,  2, {ACT_SETDLE0,
-							  ACT_HUPMODEM,
-							  ACT_TIMEOUT} },
-	{EV_TIMEOUT,	105, 105, -1,		103,  5, {0},	"Z\r"},
-
-	{RSP_ERROR,	102, 102, -1,		107,  5, {0},	"^GETPRE\r"},
-	{RSP_OK,	107, 107, -1,		  0,  0, {ACT_CONFIGMODE} },
-	{RSP_ERROR,	107, 107, -1,		  0,  0, {ACT_FAILINIT} },
-	{EV_TIMEOUT,	107, 107, -1,		  0,  0, {ACT_FAILINIT} },
-
-	{RSP_ERROR,	103, 103, -1,		  0,  0, {ACT_FAILINIT} },
-	{EV_TIMEOUT,	103, 103, -1,		  0,  0, {ACT_FAILINIT} },
-
-	{RSP_STRING,	120, 120, -1,		121, -1, {ACT_SETVER} },
-
-	{EV_TIMEOUT,	120, 121, -1,		  0,  0, {ACT_FAILVER,
-							  ACT_INIT} },
-	{RSP_ERROR,	120, 121, -1,		  0,  0, {ACT_FAILVER,
-							  ACT_INIT} },
-	{RSP_OK,	121, 121, -1,		  0,  0, {ACT_GOTVER,
-							  ACT_INIT} },
-	{RSP_NONE,	121, 121, -1,		120,  0, {ACT_GETSTRING} },
-
-/* leave dle mode */
-	{RSP_INIT,	  0,   0, SEQ_DLE0,	201,  5, {0},	"^SDLE=0\r"},
-	{RSP_OK,	201, 201, -1,		202, -1},
-	{RSP_ZDLE,	202, 202,  0,		  0,  0, {ACT_DLE0} },
-	{RSP_NODEV,	200, 249, -1,		  0,  0, {ACT_FAKEDLE0} },
-	{RSP_ERROR,	200, 249, -1,		  0,  0, {ACT_FAILDLE0} },
-	{EV_TIMEOUT,	200, 249, -1,		  0,  0, {ACT_FAILDLE0} },
-
-/* enter dle mode */
-	{RSP_INIT,	  0,   0, SEQ_DLE1,	251,  5, {0},	"^SDLE=1\r"},
-	{RSP_OK,	251, 251, -1,		252, -1},
-	{RSP_ZDLE,	252, 252,  1,		  0,  0, {ACT_DLE1} },
-	{RSP_ERROR,	250, 299, -1,		  0,  0, {ACT_FAILDLE1} },
-	{EV_TIMEOUT,	250, 299, -1,		  0,  0, {ACT_FAILDLE1} },
-
-/* incoming call */
-	{RSP_RING,	 -1,  -1, -1,		 -1, -1, {ACT_RING} },
-
-/* get cid */
-	{RSP_INIT,	  0,   0, SEQ_CID,	301,  5, {0},	"^SGCI?\r"},
-	{RSP_OK,	301, 301, -1,		302, -1},
-	{RSP_ZGCI,	302, 302, -1,		  0,  0, {ACT_CID} },
-	{RSP_ERROR,	301, 349, -1,		  0,  0, {ACT_FAILCID} },
-	{EV_TIMEOUT,	301, 349, -1,		  0,  0, {ACT_FAILCID} },
-
-/* enter cid mode */
-	{RSP_INIT,	  0,   0, SEQ_CIDMODE,	150,  5, {0},	"^SGCI=1\r"},
-	{RSP_OK,	150, 150, -1,		  0,  0, {ACT_CMODESET} },
-	{RSP_ERROR,	150, 150, -1,		  0,  0, {ACT_FAILCMODE} },
-	{EV_TIMEOUT,	150, 150, -1,		  0,  0, {ACT_FAILCMODE} },
-
-/* leave cid mode */
-	{RSP_INIT,	  0,   0, SEQ_UMMODE,	160,  5, {0},	"Z\r"},
-	{RSP_OK,	160, 160, -1,		  0,  0, {ACT_UMODESET} },
-	{RSP_ERROR,	160, 160, -1,		  0,  0, {ACT_FAILUMODE} },
-	{EV_TIMEOUT,	160, 160, -1,		  0,  0, {ACT_FAILUMODE} },
-
-/* abort getting cid */
-	{RSP_INIT,	  0,   0, SEQ_NOCID,	  0,  0, {ACT_ABORTCID} },
-
-/* reset */
-	{RSP_INIT,	  0,   0, SEQ_SHUTDOWN,	504,  5, {0},	"Z\r"},
-	{RSP_OK,	504, 504, -1,		  0,  0, {ACT_SDOWN} },
-	{RSP_ERROR,	501, 599, -1,		  0,  0, {ACT_FAILSDOWN} },
-	{EV_TIMEOUT,	501, 599, -1,		  0,  0, {ACT_FAILSDOWN} },
-	{RSP_NODEV,	501, 599, -1,		  0,  0, {ACT_FAKESDOWN} },
-
-	{EV_PROC_CIDMODE, -1, -1, -1,		 -1, -1, {ACT_PROC_CIDMODE} },
-	{EV_IF_LOCK,	 -1,  -1, -1,		 -1, -1, {ACT_IF_LOCK} },
-	{EV_IF_VER,	 -1,  -1, -1,		 -1, -1, {ACT_IF_VER} },
-	{EV_START,	 -1,  -1, -1,		 -1, -1, {ACT_START} },
-	{EV_STOP,	 -1,  -1, -1,		 -1, -1, {ACT_STOP} },
-	{EV_SHUTDOWN,	 -1,  -1, -1,		 -1, -1, {ACT_SHUTDOWN} },
-
-/* misc. */
-	{RSP_ERROR,	 -1,  -1, -1,		 -1, -1, {ACT_ERROR} },
-	{RSP_ZCAU,	 -1,  -1, -1,		 -1, -1, {ACT_ZCAU} },
-	{RSP_NONE,	 -1,  -1, -1,		 -1, -1, {ACT_DEBUG} },
-	{RSP_ANY,	 -1,  -1, -1,		 -1, -1, {ACT_WARN} },
-	{RSP_LAST}
-};
-
-/* 600: start dialing, 650: dial in progress, 800: connection is up, 700: ring,
- * 400: hup, 750: accepted icall */
-struct reply_t gigaset_tab_cid[] =
-{
-/* resp_code, min_ConState, max_ConState, parameter, new_ConState, timeout,
- * action, command */
-
-/* dial */
-	{EV_DIAL,	 -1,  -1, -1,		 -1, -1, {ACT_DIAL} },
-	{RSP_INIT,	  0,   0, SEQ_DIAL,	601,  5, {ACT_CMD + AT_BC} },
-	{RSP_OK,	601, 601, -1,		603,  5, {ACT_CMD + AT_PROTO} },
-	{RSP_OK,	603, 603, -1,		604,  5, {ACT_CMD + AT_TYPE} },
-	{RSP_OK,	604, 604, -1,		605,  5, {ACT_CMD + AT_MSN} },
-	{RSP_NULL,	605, 605, -1,		606,  5, {ACT_CMD + AT_CLIP} },
-	{RSP_OK,	605, 605, -1,		606,  5, {ACT_CMD + AT_CLIP} },
-	{RSP_NULL,	606, 606, -1,		607,  5, {ACT_CMD + AT_ISO} },
-	{RSP_OK,	606, 606, -1,		607,  5, {ACT_CMD + AT_ISO} },
-	{RSP_OK,	607, 607, -1,		608,  5, {0},	"+VLS=17\r"},
-	{RSP_OK,	608, 608, -1,		609, -1},
-	{RSP_ZSAU,	609, 609, ZSAU_PROCEEDING, 610, 5, {ACT_CMD + AT_DIAL} },
-	{RSP_OK,	610, 610, -1,		650,  0, {ACT_DIALING} },
-
-	{RSP_ERROR,	601, 610, -1,		  0,  0, {ACT_ABORTDIAL} },
-	{EV_TIMEOUT,	601, 610, -1,		  0,  0, {ACT_ABORTDIAL} },
-
-/* optional dialing responses */
-	{EV_BC_OPEN,	650, 650, -1,		651, -1},
-	{RSP_ZVLS,	609, 651, 17,		 -1, -1, {ACT_DEBUG} },
-	{RSP_ZCTP,	610, 651, -1,		 -1, -1, {ACT_DEBUG} },
-	{RSP_ZCPN,	610, 651, -1,		 -1, -1, {ACT_DEBUG} },
-	{RSP_ZSAU,	650, 651, ZSAU_CALL_DELIVERED, -1, -1, {ACT_DEBUG} },
-
-/* connect */
-	{RSP_ZSAU,	650, 650, ZSAU_ACTIVE,	800, -1, {ACT_CONNECT} },
-	{RSP_ZSAU,	651, 651, ZSAU_ACTIVE,	800, -1, {ACT_CONNECT,
-							  ACT_NOTIFY_BC_UP} },
-	{RSP_ZSAU,	750, 750, ZSAU_ACTIVE,	800, -1, {ACT_CONNECT} },
-	{RSP_ZSAU,	751, 751, ZSAU_ACTIVE,	800, -1, {ACT_CONNECT,
-							  ACT_NOTIFY_BC_UP} },
-	{EV_BC_OPEN,	800, 800, -1,		800, -1, {ACT_NOTIFY_BC_UP} },
-
-/* remote hangup */
-	{RSP_ZSAU,	650, 651, ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEREJECT} },
-	{RSP_ZSAU,	750, 751, ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEHUP} },
-	{RSP_ZSAU,	800, 800, ZSAU_DISCONNECT_IND, 0, 0, {ACT_REMOTEHUP} },
-
-/* hangup */
-	{EV_HUP,	 -1,  -1, -1,		 -1, -1, {ACT_HUP} },
-	{RSP_INIT,	 -1,  -1, SEQ_HUP,	401,  5, {0},	"+VLS=0\r"},
-	{RSP_OK,	401, 401, -1,		402,  5},
-	{RSP_ZVLS,	402, 402,  0,		403,  5},
-	{RSP_ZSAU,	403, 403, ZSAU_DISCONNECT_REQ, -1, -1, {ACT_DEBUG} },
-	{RSP_ZSAU,	403, 403, ZSAU_NULL,	  0,  0, {ACT_DISCONNECT} },
-	{RSP_NODEV,	401, 403, -1,		  0,  0, {ACT_FAKEHUP} },
-	{RSP_ERROR,	401, 401, -1,		  0,  0, {ACT_ABORTHUP} },
-	{EV_TIMEOUT,	401, 403, -1,		  0,  0, {ACT_ABORTHUP} },
-
-	{EV_BC_CLOSED,	  0,   0, -1,		  0, -1, {ACT_NOTIFY_BC_DOWN} },
-
-/* ring */
-	{RSP_ZBC,	700, 700, -1,		 -1, -1, {0} },
-	{RSP_ZHLC,	700, 700, -1,		 -1, -1, {0} },
-	{RSP_NMBR,	700, 700, -1,		 -1, -1, {0} },
-	{RSP_ZCPN,	700, 700, -1,		 -1, -1, {0} },
-	{RSP_ZCTP,	700, 700, -1,		 -1, -1, {0} },
-	{EV_TIMEOUT,	700, 700, -1,		720, 720, {ACT_ICALL} },
-	{EV_BC_CLOSED,	720, 720, -1,		  0, -1, {ACT_NOTIFY_BC_DOWN} },
-
-/*accept icall*/
-	{EV_ACCEPT,	 -1,  -1, -1,		 -1, -1, {ACT_ACCEPT} },
-	{RSP_INIT,	720, 720, SEQ_ACCEPT,	721,  5, {ACT_CMD + AT_PROTO} },
-	{RSP_OK,	721, 721, -1,		722,  5, {ACT_CMD + AT_ISO} },
-	{RSP_OK,	722, 722, -1,		723,  5, {0},	"+VLS=17\r"},
-	{RSP_OK,	723, 723, -1,		724,  5, {0} },
-	{RSP_ZVLS,	724, 724, 17,		750, 50, {ACT_ACCEPTED} },
-	{RSP_ERROR,	721, 729, -1,		  0,  0, {ACT_ABORTACCEPT} },
-	{EV_TIMEOUT,	721, 729, -1,		  0,  0, {ACT_ABORTACCEPT} },
-	{RSP_ZSAU,	700, 729, ZSAU_NULL,	  0,  0, {ACT_ABORTACCEPT} },
-	{RSP_ZSAU,	700, 729, ZSAU_ACTIVE,	  0,  0, {ACT_ABORTACCEPT} },
-	{RSP_ZSAU,	700, 729, ZSAU_DISCONNECT_IND, 0, 0, {ACT_ABORTACCEPT} },
-
-	{EV_BC_OPEN,	750, 750, -1,		751, -1},
-	{EV_TIMEOUT,	750, 751, -1,		  0,  0, {ACT_CONNTIMEOUT} },
-
-/* B channel closed (general case) */
-	{EV_BC_CLOSED,	 -1,  -1, -1,		 -1, -1, {ACT_NOTIFY_BC_DOWN} },
-
-/* misc. */
-	{RSP_ZCON,	 -1,  -1, -1,		 -1, -1, {ACT_DEBUG} },
-	{RSP_ZCAU,	 -1,  -1, -1,		 -1, -1, {ACT_ZCAU} },
-	{RSP_NONE,	 -1,  -1, -1,		 -1, -1, {ACT_DEBUG} },
-	{RSP_ANY,	 -1,  -1, -1,		 -1, -1, {ACT_WARN} },
-	{RSP_LAST}
-};
-
-
-static const struct resp_type_t {
-	char	*response;
-	int	resp_code;
-	int	type;
-}
-resp_type[] =
-{
-	{"OK",		RSP_OK,		RT_NOTHING},
-	{"ERROR",	RSP_ERROR,	RT_NOTHING},
-	{"ZSAU",	RSP_ZSAU,	RT_ZSAU},
-	{"ZCAU",	RSP_ZCAU,	RT_ZCAU},
-	{"RING",	RSP_RING,	RT_RING},
-	{"ZGCI",	RSP_ZGCI,	RT_NUMBER},
-	{"ZVLS",	RSP_ZVLS,	RT_NUMBER},
-	{"ZCTP",	RSP_ZCTP,	RT_NUMBER},
-	{"ZDLE",	RSP_ZDLE,	RT_NUMBER},
-	{"ZHLC",	RSP_ZHLC,	RT_STRING},
-	{"ZBC",		RSP_ZBC,	RT_STRING},
-	{"NMBR",	RSP_NMBR,	RT_STRING},
-	{"ZCPN",	RSP_ZCPN,	RT_STRING},
-	{"ZCON",	RSP_ZCON,	RT_STRING},
-	{NULL,		0,		0}
-};
-
-static const struct zsau_resp_t {
-	char	*str;
-	int	code;
-}
-zsau_resp[] =
-{
-	{"OUTGOING_CALL_PROCEEDING",	ZSAU_PROCEEDING},
-	{"CALL_DELIVERED",		ZSAU_CALL_DELIVERED},
-	{"ACTIVE",			ZSAU_ACTIVE},
-	{"DISCONNECT_IND",		ZSAU_DISCONNECT_IND},
-	{"NULL",			ZSAU_NULL},
-	{"DISCONNECT_REQ",		ZSAU_DISCONNECT_REQ},
-	{NULL,				ZSAU_UNKNOWN}
-};
-
-/* check for and remove fixed string prefix
- * If s starts with prefix terminated by a non-alphanumeric character,
- * return pointer to the first character after that, otherwise return NULL.
- */
-static char *skip_prefix(char *s, const char *prefix)
-{
-	while (*prefix)
-		if (*s++ != *prefix++)
-			return NULL;
-	if (isalnum(*s))
-		return NULL;
-	return s;
-}
-
-/* queue event with CID */
-static void add_cid_event(struct cardstate *cs, int cid, int type,
-			  void *ptr, int parameter)
-{
-	unsigned long flags;
-	unsigned next, tail;
-	struct event_t *event;
-
-	gig_dbg(DEBUG_EVENT, "queueing event %d for cid %d", type, cid);
-
-	spin_lock_irqsave(&cs->ev_lock, flags);
-
-	tail = cs->ev_tail;
-	next = (tail + 1) % MAX_EVENTS;
-	if (unlikely(next == cs->ev_head)) {
-		dev_err(cs->dev, "event queue full\n");
-		kfree(ptr);
-	} else {
-		event = cs->events + tail;
-		event->type = type;
-		event->cid = cid;
-		event->ptr = ptr;
-		event->arg = NULL;
-		event->parameter = parameter;
-		event->at_state = NULL;
-		cs->ev_tail = next;
-	}
-
-	spin_unlock_irqrestore(&cs->ev_lock, flags);
-}
-
-/**
- * gigaset_handle_modem_response() - process received modem response
- * @cs:		device descriptor structure.
- *
- * Called by asyncdata/isocdata if a block of data received from the
- * device must be processed as a modem command response. The data is
- * already in the cs structure.
- */
-void gigaset_handle_modem_response(struct cardstate *cs)
-{
-	char *eoc, *psep, *ptr;
-	const struct resp_type_t *rt;
-	const struct zsau_resp_t *zr;
-	int cid, parameter;
-	u8 type, value;
-
-	if (!cs->cbytes) {
-		/* ignore additional LFs/CRs (M10x config mode or cx100) */
-		gig_dbg(DEBUG_MCMD, "skipped EOL [%02X]", cs->respdata[0]);
-		return;
-	}
-	cs->respdata[cs->cbytes] = 0;
-
-	if (cs->at_state.getstring) {
-		/* state machine wants next line verbatim */
-		cs->at_state.getstring = 0;
-		ptr = kstrdup(cs->respdata, GFP_ATOMIC);
-		gig_dbg(DEBUG_EVENT, "string==%s", ptr ? ptr : "NULL");
-		add_cid_event(cs, 0, RSP_STRING, ptr, 0);
-		return;
-	}
-
-	/* look up response type */
-	for (rt = resp_type; rt->response; ++rt) {
-		eoc = skip_prefix(cs->respdata, rt->response);
-		if (eoc)
-			break;
-	}
-	if (!rt->response) {
-		add_cid_event(cs, 0, RSP_NONE, NULL, 0);
-		gig_dbg(DEBUG_EVENT, "unknown modem response: '%s'\n",
-			cs->respdata);
-		return;
-	}
-
-	/* check for CID */
-	psep = strrchr(cs->respdata, ';');
-	if (psep &&
-	    !kstrtoint(psep + 1, 10, &cid) &&
-	    cid >= 1 && cid <= 65535) {
-		/* valid CID: chop it off */
-		*psep = 0;
-	} else {
-		/* no valid CID: leave unchanged */
-		cid = 0;
-	}
-
-	gig_dbg(DEBUG_EVENT, "CMD received: %s", cs->respdata);
-	if (cid)
-		gig_dbg(DEBUG_EVENT, "CID: %d", cid);
-
-	switch (rt->type) {
-	case RT_NOTHING:
-		/* check parameter separator */
-		if (*eoc)
-			goto bad_param;	/* extra parameter */
-
-		add_cid_event(cs, cid, rt->resp_code, NULL, 0);
-		break;
-
-	case RT_RING:
-		/* check parameter separator */
-		if (!*eoc)
-			eoc = NULL;	/* no parameter */
-		else if (*eoc++ != ',')
-			goto bad_param;
-
-		add_cid_event(cs, 0, rt->resp_code, NULL, cid);
-
-		/* process parameters as individual responses */
-		while (eoc) {
-			/* look up parameter type */
-			psep = NULL;
-			for (rt = resp_type; rt->response; ++rt) {
-				psep = skip_prefix(eoc, rt->response);
-				if (psep)
-					break;
-			}
-
-			/* all legal parameters are of type RT_STRING */
-			if (!psep || rt->type != RT_STRING) {
-				dev_warn(cs->dev,
-					 "illegal RING parameter: '%s'\n",
-					 eoc);
-				return;
-			}
-
-			/* skip parameter value separator */
-			if (*psep++ != '=')
-				goto bad_param;
-
-			/* look up end of parameter */
-			eoc = strchr(psep, ',');
-			if (eoc)
-				*eoc++ = 0;
-
-			/* retrieve parameter value */
-			ptr = kstrdup(psep, GFP_ATOMIC);
-
-			/* queue event */
-			add_cid_event(cs, cid, rt->resp_code, ptr, 0);
-		}
-		break;
-
-	case RT_ZSAU:
-		/* check parameter separator */
-		if (!*eoc) {
-			/* no parameter */
-			add_cid_event(cs, cid, rt->resp_code, NULL, ZSAU_NONE);
-			break;
-		}
-		if (*eoc++ != '=')
-			goto bad_param;
-
-		/* look up parameter value */
-		for (zr = zsau_resp; zr->str; ++zr)
-			if (!strcmp(eoc, zr->str))
-				break;
-		if (!zr->str)
-			goto bad_param;
-
-		add_cid_event(cs, cid, rt->resp_code, NULL, zr->code);
-		break;
-
-	case RT_STRING:
-		/* check parameter separator */
-		if (*eoc++ != '=')
-			goto bad_param;
-
-		/* retrieve parameter value */
-		ptr = kstrdup(eoc, GFP_ATOMIC);
-
-		/* queue event */
-		add_cid_event(cs, cid, rt->resp_code, ptr, 0);
-		break;
-
-	case RT_ZCAU:
-		/* check parameter separators */
-		if (*eoc++ != '=')
-			goto bad_param;
-		psep = strchr(eoc, ',');
-		if (!psep)
-			goto bad_param;
-		*psep++ = 0;
-
-		/* decode parameter values */
-		if (kstrtou8(eoc, 16, &type) || kstrtou8(psep, 16, &value)) {
-			*--psep = ',';
-			goto bad_param;
-		}
-		parameter = (type << 8) | value;
-
-		add_cid_event(cs, cid, rt->resp_code, NULL, parameter);
-		break;
-
-	case RT_NUMBER:
-		/* check parameter separator */
-		if (*eoc++ != '=')
-			goto bad_param;
-
-		/* decode parameter value */
-		if (kstrtoint(eoc, 10, &parameter))
-			goto bad_param;
-
-		/* special case ZDLE: set flag before queueing event */
-		if (rt->resp_code == RSP_ZDLE)
-			cs->dle = parameter;
-
-		add_cid_event(cs, cid, rt->resp_code, NULL, parameter);
-		break;
-
-bad_param:
-		/* parameter unexpected, incomplete or malformed */
-		dev_warn(cs->dev, "bad parameter in response '%s'\n",
-			 cs->respdata);
-		add_cid_event(cs, cid, rt->resp_code, NULL, -1);
-		break;
-
-	default:
-		dev_err(cs->dev, "%s: internal error on '%s'\n",
-			__func__, cs->respdata);
-	}
-}
-EXPORT_SYMBOL_GPL(gigaset_handle_modem_response);
-
-/* disconnect_nobc
- * process closing of connection associated with given AT state structure
- * without B channel
- */
-static void disconnect_nobc(struct at_state_t **at_state_p,
-			    struct cardstate *cs)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cs->lock, flags);
-	++(*at_state_p)->seq_index;
-
-	/* revert to selected idle mode */
-	if (!cs->cidmode) {
-		cs->at_state.pending_commands |= PC_UMMODE;
-		gig_dbg(DEBUG_EVENT, "Scheduling PC_UMMODE");
-		cs->commands_pending = 1;
-	}
-
-	/* check for and deallocate temporary AT state */
-	if (!list_empty(&(*at_state_p)->list)) {
-		list_del(&(*at_state_p)->list);
-		kfree(*at_state_p);
-		*at_state_p = NULL;
-	}
-
-	spin_unlock_irqrestore(&cs->lock, flags);
-}
-
-/* disconnect_bc
- * process closing of connection associated with given AT state structure
- * and B channel
- */
-static void disconnect_bc(struct at_state_t *at_state,
-			  struct cardstate *cs, struct bc_state *bcs)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cs->lock, flags);
-	++at_state->seq_index;
-
-	/* revert to selected idle mode */
-	if (!cs->cidmode) {
-		cs->at_state.pending_commands |= PC_UMMODE;
-		gig_dbg(DEBUG_EVENT, "Scheduling PC_UMMODE");
-		cs->commands_pending = 1;
-	}
-	spin_unlock_irqrestore(&cs->lock, flags);
-
-	/* invoke hardware specific handler */
-	cs->ops->close_bchannel(bcs);
-
-	/* notify LL */
-	if (bcs->chstate & (CHS_D_UP | CHS_NOTIFY_LL)) {
-		bcs->chstate &= ~(CHS_D_UP | CHS_NOTIFY_LL);
-		gigaset_isdn_hupD(bcs);
-	}
-}
-
-/* get_free_channel
- * get a free AT state structure: either one of those associated with the
- * B channels of the Gigaset device, or if none of those is available,
- * a newly allocated one with bcs=NULL
- * The structure should be freed by calling disconnect_nobc() after use.
- */
-static inline struct at_state_t *get_free_channel(struct cardstate *cs,
-						  int cid)
-/* cids: >0: siemens-cid
- *        0: without cid
- *       -1: no cid assigned yet
- */
-{
-	unsigned long flags;
-	int i;
-	struct at_state_t *ret;
-
-	for (i = 0; i < cs->channels; ++i)
-		if (gigaset_get_channel(cs->bcs + i) >= 0) {
-			ret = &cs->bcs[i].at_state;
-			ret->cid = cid;
-			return ret;
-		}
-
-	spin_lock_irqsave(&cs->lock, flags);
-	ret = kmalloc(sizeof(struct at_state_t), GFP_ATOMIC);
-	if (ret) {
-		gigaset_at_init(ret, NULL, cs, cid);
-		list_add(&ret->list, &cs->temp_at_states);
-	}
-	spin_unlock_irqrestore(&cs->lock, flags);
-	return ret;
-}
-
-static void init_failed(struct cardstate *cs, int mode)
-{
-	int i;
-	struct at_state_t *at_state;
-
-	cs->at_state.pending_commands &= ~PC_INIT;
-	cs->mode = mode;
-	cs->mstate = MS_UNINITIALIZED;
-	gigaset_free_channels(cs);
-	for (i = 0; i < cs->channels; ++i) {
-		at_state = &cs->bcs[i].at_state;
-		if (at_state->pending_commands & PC_CID) {
-			at_state->pending_commands &= ~PC_CID;
-			at_state->pending_commands |= PC_NOCID;
-			cs->commands_pending = 1;
-		}
-	}
-}
-
-static void schedule_init(struct cardstate *cs, int state)
-{
-	if (cs->at_state.pending_commands & PC_INIT) {
-		gig_dbg(DEBUG_EVENT, "not scheduling PC_INIT again");
-		return;
-	}
-	cs->mstate = state;
-	cs->mode = M_UNKNOWN;
-	gigaset_block_channels(cs);
-	cs->at_state.pending_commands |= PC_INIT;
-	gig_dbg(DEBUG_EVENT, "Scheduling PC_INIT");
-	cs->commands_pending = 1;
-}
-
-/* send an AT command
- * adding the "AT" prefix, cid and DLE encapsulation as appropriate
- */
-static void send_command(struct cardstate *cs, const char *cmd,
-			 struct at_state_t *at_state)
-{
-	int cid = at_state->cid;
-	struct cmdbuf_t *cb;
-	size_t buflen;
-
-	buflen = strlen(cmd) + 12; /* DLE ( A T 1 2 3 4 5 <cmd> DLE ) \0 */
-	cb = kmalloc(sizeof(struct cmdbuf_t) + buflen, GFP_ATOMIC);
-	if (!cb) {
-		dev_err(cs->dev, "%s: out of memory\n", __func__);
-		return;
-	}
-	if (cid > 0 && cid <= 65535)
-		cb->len = snprintf(cb->buf, buflen,
-				   cs->dle ? "\020(AT%d%s\020)" : "AT%d%s",
-				   cid, cmd);
-	else
-		cb->len = snprintf(cb->buf, buflen,
-				   cs->dle ? "\020(AT%s\020)" : "AT%s",
-				   cmd);
-	cb->offset = 0;
-	cb->next = NULL;
-	cb->wake_tasklet = NULL;
-	cs->ops->write_cmd(cs, cb);
-}
-
-static struct at_state_t *at_state_from_cid(struct cardstate *cs, int cid)
-{
-	struct at_state_t *at_state;
-	int i;
-	unsigned long flags;
-
-	if (cid == 0)
-		return &cs->at_state;
-
-	for (i = 0; i < cs->channels; ++i)
-		if (cid == cs->bcs[i].at_state.cid)
-			return &cs->bcs[i].at_state;
-
-	spin_lock_irqsave(&cs->lock, flags);
-
-	list_for_each_entry(at_state, &cs->temp_at_states, list)
-		if (cid == at_state->cid) {
-			spin_unlock_irqrestore(&cs->lock, flags);
-			return at_state;
-		}
-
-	spin_unlock_irqrestore(&cs->lock, flags);
-
-	return NULL;
-}
-
-static void bchannel_down(struct bc_state *bcs)
-{
-	if (bcs->chstate & CHS_B_UP) {
-		bcs->chstate &= ~CHS_B_UP;
-		gigaset_isdn_hupB(bcs);
-	}
-
-	if (bcs->chstate & (CHS_D_UP | CHS_NOTIFY_LL)) {
-		bcs->chstate &= ~(CHS_D_UP | CHS_NOTIFY_LL);
-		gigaset_isdn_hupD(bcs);
-	}
-
-	gigaset_free_channel(bcs);
-
-	gigaset_bcs_reinit(bcs);
-}
-
-static void bchannel_up(struct bc_state *bcs)
-{
-	if (bcs->chstate & CHS_B_UP) {
-		dev_notice(bcs->cs->dev, "%s: B channel already up\n",
-			   __func__);
-		return;
-	}
-
-	bcs->chstate |= CHS_B_UP;
-	gigaset_isdn_connB(bcs);
-}
-
-static void start_dial(struct at_state_t *at_state, void *data,
-		       unsigned seq_index)
-{
-	struct bc_state *bcs = at_state->bcs;
-	struct cardstate *cs = at_state->cs;
-	char **commands = data;
-	unsigned long flags;
-	int i;
-
-	bcs->chstate |= CHS_NOTIFY_LL;
-
-	spin_lock_irqsave(&cs->lock, flags);
-	if (at_state->seq_index != seq_index) {
-		spin_unlock_irqrestore(&cs->lock, flags);
-		goto error;
-	}
-	spin_unlock_irqrestore(&cs->lock, flags);
-
-	for (i = 0; i < AT_NUM; ++i) {
-		kfree(bcs->commands[i]);
-		bcs->commands[i] = commands[i];
-	}
-
-	at_state->pending_commands |= PC_CID;
-	gig_dbg(DEBUG_EVENT, "Scheduling PC_CID");
-	cs->commands_pending = 1;
-	return;
-
-error:
-	for (i = 0; i < AT_NUM; ++i) {
-		kfree(commands[i]);
-		commands[i] = NULL;
-	}
-	at_state->pending_commands |= PC_NOCID;
-	gig_dbg(DEBUG_EVENT, "Scheduling PC_NOCID");
-	cs->commands_pending = 1;
-	return;
-}
-
-static void start_accept(struct at_state_t *at_state)
-{
-	struct cardstate *cs = at_state->cs;
-	struct bc_state *bcs = at_state->bcs;
-	int i;
-
-	for (i = 0; i < AT_NUM; ++i) {
-		kfree(bcs->commands[i]);
-		bcs->commands[i] = NULL;
-	}
-
-	bcs->commands[AT_PROTO] = kmalloc(9, GFP_ATOMIC);
-	bcs->commands[AT_ISO] = kmalloc(9, GFP_ATOMIC);
-	if (!bcs->commands[AT_PROTO] || !bcs->commands[AT_ISO]) {
-		dev_err(at_state->cs->dev, "out of memory\n");
-		/* error reset */
-		at_state->pending_commands |= PC_HUP;
-		gig_dbg(DEBUG_EVENT, "Scheduling PC_HUP");
-		cs->commands_pending = 1;
-		return;
-	}
-
-	snprintf(bcs->commands[AT_PROTO], 9, "^SBPR=%u\r", bcs->proto2);
-	snprintf(bcs->commands[AT_ISO], 9, "^SISO=%u\r", bcs->channel + 1);
-
-	at_state->pending_commands |= PC_ACCEPT;
-	gig_dbg(DEBUG_EVENT, "Scheduling PC_ACCEPT");
-	cs->commands_pending = 1;
-}
-
-static void do_start(struct cardstate *cs)
-{
-	gigaset_free_channels(cs);
-
-	if (cs->mstate != MS_LOCKED)
-		schedule_init(cs, MS_INIT);
-
-	cs->isdn_up = 1;
-	gigaset_isdn_start(cs);
-
-	cs->waiting = 0;
-	wake_up(&cs->waitqueue);
-}
-
-static void finish_shutdown(struct cardstate *cs)
-{
-	if (cs->mstate != MS_LOCKED) {
-		cs->mstate = MS_UNINITIALIZED;
-		cs->mode = M_UNKNOWN;
-	}
-
-	/* Tell the LL that the device is not available .. */
-	if (cs->isdn_up) {
-		cs->isdn_up = 0;
-		gigaset_isdn_stop(cs);
-	}
-
-	/* The rest is done by cleanup_cs() in process context. */
-
-	cs->cmd_result = -ENODEV;
-	cs->waiting = 0;
-	wake_up(&cs->waitqueue);
-}
-
-static void do_shutdown(struct cardstate *cs)
-{
-	gigaset_block_channels(cs);
-
-	if (cs->mstate == MS_READY) {
-		cs->mstate = MS_SHUTDOWN;
-		cs->at_state.pending_commands |= PC_SHUTDOWN;
-		gig_dbg(DEBUG_EVENT, "Scheduling PC_SHUTDOWN");
-		cs->commands_pending = 1;
-	} else
-		finish_shutdown(cs);
-}
-
-static void do_stop(struct cardstate *cs)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cs->lock, flags);
-	cs->connected = 0;
-	spin_unlock_irqrestore(&cs->lock, flags);
-
-	do_shutdown(cs);
-}
-
-/* Entering cid mode or getting a cid failed:
- * try to initialize the device and try again.
- *
- * channel >= 0: getting cid for the channel failed
- * channel < 0:  entering cid mode failed
- *
- * returns 0 on success, <0 on failure
- */
-static int reinit_and_retry(struct cardstate *cs, int channel)
-{
-	int i;
-
-	if (--cs->retry_count <= 0)
-		return -EFAULT;
-
-	for (i = 0; i < cs->channels; ++i)
-		if (cs->bcs[i].at_state.cid > 0)
-			return -EBUSY;
-
-	if (channel < 0)
-		dev_warn(cs->dev,
-			 "Could not enter cid mode. Reinit device and try again.\n");
-	else {
-		dev_warn(cs->dev,
-			 "Could not get a call id. Reinit device and try again.\n");
-		cs->bcs[channel].at_state.pending_commands |= PC_CID;
-	}
-	schedule_init(cs, MS_INIT);
-	return 0;
-}
-
-static int at_state_invalid(struct cardstate *cs,
-			    struct at_state_t *test_ptr)
-{
-	unsigned long flags;
-	unsigned channel;
-	struct at_state_t *at_state;
-	int retval = 0;
-
-	spin_lock_irqsave(&cs->lock, flags);
-
-	if (test_ptr == &cs->at_state)
-		goto exit;
-
-	list_for_each_entry(at_state, &cs->temp_at_states, list)
-		if (at_state == test_ptr)
-			goto exit;
-
-	for (channel = 0; channel < cs->channels; ++channel)
-		if (&cs->bcs[channel].at_state == test_ptr)
-			goto exit;
-
-	retval = 1;
-exit:
-	spin_unlock_irqrestore(&cs->lock, flags);
-	return retval;
-}
-
-static void handle_icall(struct cardstate *cs, struct bc_state *bcs,
-			 struct at_state_t *at_state)
-{
-	int retval;
-
-	retval = gigaset_isdn_icall(at_state);
-	switch (retval) {
-	case ICALL_ACCEPT:
-		break;
-	default:
-		dev_err(cs->dev, "internal error: disposition=%d\n", retval);
-		/* fall through */
-	case ICALL_IGNORE:
-	case ICALL_REJECT:
-		/* hang up actively
-		 * Device doc says that would reject the call.
-		 * In fact it doesn't.
-		 */
-		at_state->pending_commands |= PC_HUP;
-		cs->commands_pending = 1;
-		break;
-	}
-}
-
-static int do_lock(struct cardstate *cs)
-{
-	int mode;
-	int i;
-
-	switch (cs->mstate) {
-	case MS_UNINITIALIZED:
-	case MS_READY:
-		if (cs->cur_at_seq || !list_empty(&cs->temp_at_states) ||
-		    cs->at_state.pending_commands)
-			return -EBUSY;
-
-		for (i = 0; i < cs->channels; ++i)
-			if (cs->bcs[i].at_state.pending_commands)
-				return -EBUSY;
-
-		if (gigaset_get_channels(cs) < 0)
-			return -EBUSY;
-
-		break;
-	case MS_LOCKED:
-		break;
-	default:
-		return -EBUSY;
-	}
-
-	mode = cs->mode;
-	cs->mstate = MS_LOCKED;
-	cs->mode = M_UNKNOWN;
-
-	return mode;
-}
-
-static int do_unlock(struct cardstate *cs)
-{
-	if (cs->mstate != MS_LOCKED)
-		return -EINVAL;
-
-	cs->mstate = MS_UNINITIALIZED;
-	cs->mode = M_UNKNOWN;
-	gigaset_free_channels(cs);
-	if (cs->connected)
-		schedule_init(cs, MS_INIT);
-
-	return 0;
-}
-
-static void do_action(int action, struct cardstate *cs,
-		      struct bc_state *bcs,
-		      struct at_state_t **p_at_state, char **pp_command,
-		      int *p_genresp, int *p_resp_code,
-		      struct event_t *ev)
-{
-	struct at_state_t *at_state = *p_at_state;
-	struct bc_state *bcs2;
-	unsigned long flags;
-
-	int channel;
-
-	unsigned char *s, *e;
-	int i;
-	unsigned long val;
-
-	switch (action) {
-	case ACT_NOTHING:
-		break;
-	case ACT_TIMEOUT:
-		at_state->waiting = 1;
-		break;
-	case ACT_INIT:
-		cs->at_state.pending_commands &= ~PC_INIT;
-		cs->cur_at_seq = SEQ_NONE;
-		cs->mode = M_UNIMODEM;
-		spin_lock_irqsave(&cs->lock, flags);
-		if (!cs->cidmode) {
-			spin_unlock_irqrestore(&cs->lock, flags);
-			gigaset_free_channels(cs);
-			cs->mstate = MS_READY;
-			break;
-		}
-		spin_unlock_irqrestore(&cs->lock, flags);
-		cs->at_state.pending_commands |= PC_CIDMODE;
-		gig_dbg(DEBUG_EVENT, "Scheduling PC_CIDMODE");
-		cs->commands_pending = 1;
-		break;
-	case ACT_FAILINIT:
-		dev_warn(cs->dev, "Could not initialize the device.\n");
-		cs->dle = 0;
-		init_failed(cs, M_UNKNOWN);
-		cs->cur_at_seq = SEQ_NONE;
-		break;
-	case ACT_CONFIGMODE:
-		init_failed(cs, M_CONFIG);
-		cs->cur_at_seq = SEQ_NONE;
-		break;
-	case ACT_SETDLE1:
-		cs->dle = 1;
-		/* cs->inbuf[0].inputstate |= INS_command | INS_DLE_command; */
-		cs->inbuf[0].inputstate &=
-			~(INS_command | INS_DLE_command);
-		break;
-	case ACT_SETDLE0:
-		cs->dle = 0;
-		cs->inbuf[0].inputstate =
-			(cs->inbuf[0].inputstate & ~INS_DLE_command)
-			| INS_command;
-		break;
-	case ACT_CMODESET:
-		if (cs->mstate == MS_INIT || cs->mstate == MS_RECOVER) {
-			gigaset_free_channels(cs);
-			cs->mstate = MS_READY;
-		}
-		cs->mode = M_CID;
-		cs->cur_at_seq = SEQ_NONE;
-		break;
-	case ACT_UMODESET:
-		cs->mode = M_UNIMODEM;
-		cs->cur_at_seq = SEQ_NONE;
-		break;
-	case ACT_FAILCMODE:
-		cs->cur_at_seq = SEQ_NONE;
-		if (cs->mstate == MS_INIT || cs->mstate == MS_RECOVER) {
-			init_failed(cs, M_UNKNOWN);
-			break;
-		}
-		if (reinit_and_retry(cs, -1) < 0)
-			schedule_init(cs, MS_RECOVER);
-		break;
-	case ACT_FAILUMODE:
-		cs->cur_at_seq = SEQ_NONE;
-		schedule_init(cs, MS_RECOVER);
-		break;
-	case ACT_HUPMODEM:
-		/* send "+++" (hangup in unimodem mode) */
-		if (cs->connected) {
-			struct cmdbuf_t *cb;
-
-			cb = kmalloc(sizeof(struct cmdbuf_t) + 3, GFP_ATOMIC);
-			if (!cb) {
-				dev_err(cs->dev, "%s: out of memory\n",
-					__func__);
-				return;
-			}
-			memcpy(cb->buf, "+++", 3);
-			cb->len = 3;
-			cb->offset = 0;
-			cb->next = NULL;
-			cb->wake_tasklet = NULL;
-			cs->ops->write_cmd(cs, cb);
-		}
-		break;
-	case ACT_RING:
-		/* get fresh AT state structure for new CID */
-		at_state = get_free_channel(cs, ev->parameter);
-		if (!at_state) {
-			dev_warn(cs->dev,
-				 "RING ignored: could not allocate channel structure\n");
-			break;
-		}
-
-		/* initialize AT state structure
-		 * note that bcs may be NULL if no B channel is free
-		 */
-		at_state->ConState = 700;
-		for (i = 0; i < STR_NUM; ++i) {
-			kfree(at_state->str_var[i]);
-			at_state->str_var[i] = NULL;
-		}
-		at_state->int_var[VAR_ZCTP] = -1;
-
-		spin_lock_irqsave(&cs->lock, flags);
-		at_state->timer_expires = RING_TIMEOUT;
-		at_state->timer_active = 1;
-		spin_unlock_irqrestore(&cs->lock, flags);
-		break;
-	case ACT_ICALL:
-		handle_icall(cs, bcs, at_state);
-		break;
-	case ACT_FAILSDOWN:
-		dev_warn(cs->dev, "Could not shut down the device.\n");
-		/* fall through */
-	case ACT_FAKESDOWN:
-	case ACT_SDOWN:
-		cs->cur_at_seq = SEQ_NONE;
-		finish_shutdown(cs);
-		break;
-	case ACT_CONNECT:
-		if (cs->onechannel) {
-			at_state->pending_commands |= PC_DLE1;
-			cs->commands_pending = 1;
-			break;
-		}
-		bcs->chstate |= CHS_D_UP;
-		gigaset_isdn_connD(bcs);
-		cs->ops->init_bchannel(bcs);
-		break;
-	case ACT_DLE1:
-		cs->cur_at_seq = SEQ_NONE;
-		bcs = cs->bcs + cs->curchannel;
-
-		bcs->chstate |= CHS_D_UP;
-		gigaset_isdn_connD(bcs);
-		cs->ops->init_bchannel(bcs);
-		break;
-	case ACT_FAKEHUP:
-		at_state->int_var[VAR_ZSAU] = ZSAU_NULL;
-		/* fall through */
-	case ACT_DISCONNECT:
-		cs->cur_at_seq = SEQ_NONE;
-		at_state->cid = -1;
-		if (!bcs) {
-			disconnect_nobc(p_at_state, cs);
-		} else if (cs->onechannel && cs->dle) {
-			/* Check for other open channels not needed:
-			 * DLE only used for M10x with one B channel.
-			 */
-			at_state->pending_commands |= PC_DLE0;
-			cs->commands_pending = 1;
-		} else {
-			disconnect_bc(at_state, cs, bcs);
-		}
-		break;
-	case ACT_FAKEDLE0:
-		at_state->int_var[VAR_ZDLE] = 0;
-		cs->dle = 0;
-		/* fall through */
-	case ACT_DLE0:
-		cs->cur_at_seq = SEQ_NONE;
-		bcs2 = cs->bcs + cs->curchannel;
-		disconnect_bc(&bcs2->at_state, cs, bcs2);
-		break;
-	case ACT_ABORTHUP:
-		cs->cur_at_seq = SEQ_NONE;
-		dev_warn(cs->dev, "Could not hang up.\n");
-		at_state->cid = -1;
-		if (!bcs)
-			disconnect_nobc(p_at_state, cs);
-		else if (cs->onechannel)
-			at_state->pending_commands |= PC_DLE0;
-		else
-			disconnect_bc(at_state, cs, bcs);
-		schedule_init(cs, MS_RECOVER);
-		break;
-	case ACT_FAILDLE0:
-		cs->cur_at_seq = SEQ_NONE;
-		dev_warn(cs->dev, "Error leaving DLE mode.\n");
-		cs->dle = 0;
-		bcs2 = cs->bcs + cs->curchannel;
-		disconnect_bc(&bcs2->at_state, cs, bcs2);
-		schedule_init(cs, MS_RECOVER);
-		break;
-	case ACT_FAILDLE1:
-		cs->cur_at_seq = SEQ_NONE;
-		dev_warn(cs->dev,
-			 "Could not enter DLE mode. Trying to hang up.\n");
-		channel = cs->curchannel;
-		cs->bcs[channel].at_state.pending_commands |= PC_HUP;
-		cs->commands_pending = 1;
-		break;
-
-	case ACT_CID: /* got cid; start dialing */
-		cs->cur_at_seq = SEQ_NONE;
-		channel = cs->curchannel;
-		if (ev->parameter > 0 && ev->parameter <= 65535) {
-			cs->bcs[channel].at_state.cid = ev->parameter;
-			cs->bcs[channel].at_state.pending_commands |=
-				PC_DIAL;
-			cs->commands_pending = 1;
-			break;
-		}
-		/* fall through - bad cid */
-	case ACT_FAILCID:
-		cs->cur_at_seq = SEQ_NONE;
-		channel = cs->curchannel;
-		if (reinit_and_retry(cs, channel) < 0) {
-			dev_warn(cs->dev,
-				 "Could not get a call ID. Cannot dial.\n");
-			bcs2 = cs->bcs + channel;
-			disconnect_bc(&bcs2->at_state, cs, bcs2);
-		}
-		break;
-	case ACT_ABORTCID:
-		cs->cur_at_seq = SEQ_NONE;
-		bcs2 = cs->bcs + cs->curchannel;
-		disconnect_bc(&bcs2->at_state, cs, bcs2);
-		break;
-
-	case ACT_DIALING:
-	case ACT_ACCEPTED:
-		cs->cur_at_seq = SEQ_NONE;
-		break;
-
-	case ACT_ABORTACCEPT:	/* hangup/error/timeout during ICALL procssng */
-		if (bcs)
-			disconnect_bc(at_state, cs, bcs);
-		else
-			disconnect_nobc(p_at_state, cs);
-		break;
-
-	case ACT_ABORTDIAL:	/* error/timeout during dial preparation */
-		cs->cur_at_seq = SEQ_NONE;
-		at_state->pending_commands |= PC_HUP;
-		cs->commands_pending = 1;
-		break;
-
-	case ACT_REMOTEREJECT:	/* DISCONNECT_IND after dialling */
-	case ACT_CONNTIMEOUT:	/* timeout waiting for ZSAU=ACTIVE */
-	case ACT_REMOTEHUP:	/* DISCONNECT_IND with established connection */
-		at_state->pending_commands |= PC_HUP;
-		cs->commands_pending = 1;
-		break;
-	case ACT_GETSTRING: /* warning: RING, ZDLE, ...
-			       are not handled properly anymore */
-		at_state->getstring = 1;
-		break;
-	case ACT_SETVER:
-		if (!ev->ptr) {
-			*p_genresp = 1;
-			*p_resp_code = RSP_ERROR;
-			break;
-		}
-		s = ev->ptr;
-
-		if (!strcmp(s, "OK")) {
-			/* OK without version string: assume old response */
-			*p_genresp = 1;
-			*p_resp_code = RSP_NONE;
-			break;
-		}
-
-		for (i = 0; i < 4; ++i) {
-			val = simple_strtoul(s, (char **) &e, 10);
-			if (val > INT_MAX || e == s)
-				break;
-			if (i == 3) {
-				if (*e)
-					break;
-			} else if (*e != '.')
-				break;
-			else
-				s = e + 1;
-			cs->fwver[i] = val;
-		}
-		if (i != 4) {
-			*p_genresp = 1;
-			*p_resp_code = RSP_ERROR;
-			break;
-		}
-		cs->gotfwver = 0;
-		break;
-	case ACT_GOTVER:
-		if (cs->gotfwver == 0) {
-			cs->gotfwver = 1;
-			gig_dbg(DEBUG_EVENT,
-				"firmware version %02d.%03d.%02d.%02d",
-				cs->fwver[0], cs->fwver[1],
-				cs->fwver[2], cs->fwver[3]);
-			break;
-		}
-		/* fall through */
-	case ACT_FAILVER:
-		cs->gotfwver = -1;
-		dev_err(cs->dev, "could not read firmware version.\n");
-		break;
-	case ACT_ERROR:
-		gig_dbg(DEBUG_ANY, "%s: ERROR response in ConState %d",
-			__func__, at_state->ConState);
-		cs->cur_at_seq = SEQ_NONE;
-		break;
-	case ACT_DEBUG:
-		gig_dbg(DEBUG_ANY, "%s: resp_code %d in ConState %d",
-			__func__, ev->type, at_state->ConState);
-		break;
-	case ACT_WARN:
-		dev_warn(cs->dev, "%s: resp_code %d in ConState %d!\n",
-			 __func__, ev->type, at_state->ConState);
-		break;
-	case ACT_ZCAU:
-		dev_warn(cs->dev, "cause code %04x in connection state %d.\n",
-			 ev->parameter, at_state->ConState);
-		break;
-
-	/* events from the LL */
-
-	case ACT_DIAL:
-		if (!ev->ptr) {
-			*p_genresp = 1;
-			*p_resp_code = RSP_ERROR;
-			break;
-		}
-		start_dial(at_state, ev->ptr, ev->parameter);
-		break;
-	case ACT_ACCEPT:
-		start_accept(at_state);
-		break;
-	case ACT_HUP:
-		at_state->pending_commands |= PC_HUP;
-		gig_dbg(DEBUG_EVENT, "Scheduling PC_HUP");
-		cs->commands_pending = 1;
-		break;
-
-	/* hotplug events */
-
-	case ACT_STOP:
-		do_stop(cs);
-		break;
-	case ACT_START:
-		do_start(cs);
-		break;
-
-	/* events from the interface */
-
-	case ACT_IF_LOCK:
-		cs->cmd_result = ev->parameter ? do_lock(cs) : do_unlock(cs);
-		cs->waiting = 0;
-		wake_up(&cs->waitqueue);
-		break;
-	case ACT_IF_VER:
-		if (ev->parameter != 0)
-			cs->cmd_result = -EINVAL;
-		else if (cs->gotfwver != 1) {
-			cs->cmd_result = -ENOENT;
-		} else {
-			memcpy(ev->arg, cs->fwver, sizeof cs->fwver);
-			cs->cmd_result = 0;
-		}
-		cs->waiting = 0;
-		wake_up(&cs->waitqueue);
-		break;
-
-	/* events from the proc file system */
-
-	case ACT_PROC_CIDMODE:
-		spin_lock_irqsave(&cs->lock, flags);
-		if (ev->parameter != cs->cidmode) {
-			cs->cidmode = ev->parameter;
-			if (ev->parameter) {
-				cs->at_state.pending_commands |= PC_CIDMODE;
-				gig_dbg(DEBUG_EVENT, "Scheduling PC_CIDMODE");
-			} else {
-				cs->at_state.pending_commands |= PC_UMMODE;
-				gig_dbg(DEBUG_EVENT, "Scheduling PC_UMMODE");
-			}
-			cs->commands_pending = 1;
-		}
-		spin_unlock_irqrestore(&cs->lock, flags);
-		cs->waiting = 0;
-		wake_up(&cs->waitqueue);
-		break;
-
-	/* events from the hardware drivers */
-
-	case ACT_NOTIFY_BC_DOWN:
-		bchannel_down(bcs);
-		break;
-	case ACT_NOTIFY_BC_UP:
-		bchannel_up(bcs);
-		break;
-	case ACT_SHUTDOWN:
-		do_shutdown(cs);
-		break;
-
-
-	default:
-		if (action >= ACT_CMD && action < ACT_CMD + AT_NUM) {
-			*pp_command = at_state->bcs->commands[action - ACT_CMD];
-			if (!*pp_command) {
-				*p_genresp = 1;
-				*p_resp_code = RSP_NULL;
-			}
-		} else
-			dev_err(cs->dev, "%s: action==%d!\n", __func__, action);
-	}
-}
-
-/* State machine to do the calling and hangup procedure */
-static void process_event(struct cardstate *cs, struct event_t *ev)
-{
-	struct bc_state *bcs;
-	char *p_command = NULL;
-	struct reply_t *rep;
-	int rcode;
-	int genresp = 0;
-	int resp_code = RSP_ERROR;
-	struct at_state_t *at_state;
-	int index;
-	int curact;
-	unsigned long flags;
-
-	if (ev->cid >= 0) {
-		at_state = at_state_from_cid(cs, ev->cid);
-		if (!at_state) {
-			gig_dbg(DEBUG_EVENT, "event %d for invalid cid %d",
-				ev->type, ev->cid);
-			gigaset_add_event(cs, &cs->at_state, RSP_WRONG_CID,
-					  NULL, 0, NULL);
-			return;
-		}
-	} else {
-		at_state = ev->at_state;
-		if (at_state_invalid(cs, at_state)) {
-			gig_dbg(DEBUG_EVENT, "event for invalid at_state %p",
-				at_state);
-			return;
-		}
-	}
-
-	gig_dbg(DEBUG_EVENT, "connection state %d, event %d",
-		at_state->ConState, ev->type);
-
-	bcs = at_state->bcs;
-
-	/* Setting the pointer to the dial array */
-	rep = at_state->replystruct;
-
-	spin_lock_irqsave(&cs->lock, flags);
-	if (ev->type == EV_TIMEOUT) {
-		if (ev->parameter != at_state->timer_index
-		    || !at_state->timer_active) {
-			ev->type = RSP_NONE; /* old timeout */
-			gig_dbg(DEBUG_EVENT, "old timeout");
-		} else {
-			if (at_state->waiting)
-				gig_dbg(DEBUG_EVENT, "stopped waiting");
-			else
-				gig_dbg(DEBUG_EVENT, "timeout occurred");
-		}
-	}
-	spin_unlock_irqrestore(&cs->lock, flags);
-
-	/* if the response belongs to a variable in at_state->int_var[VAR_XXXX]
-	   or at_state->str_var[STR_XXXX], set it */
-	if (ev->type >= RSP_VAR && ev->type < RSP_VAR + VAR_NUM) {
-		index = ev->type - RSP_VAR;
-		at_state->int_var[index] = ev->parameter;
-	} else if (ev->type >= RSP_STR && ev->type < RSP_STR + STR_NUM) {
-		index = ev->type - RSP_STR;
-		kfree(at_state->str_var[index]);
-		at_state->str_var[index] = ev->ptr;
-		ev->ptr = NULL; /* prevent process_events() from
-				   deallocating ptr */
-	}
-
-	if (ev->type == EV_TIMEOUT || ev->type == RSP_STRING)
-		at_state->getstring = 0;
-
-	/* Search row in dial array which matches modem response and current
-	   constate */
-	for (;; rep++) {
-		rcode = rep->resp_code;
-		if (rcode == RSP_LAST) {
-			/* found nothing...*/
-			dev_warn(cs->dev, "%s: rcode=RSP_LAST: "
-				 "resp_code %d in ConState %d!\n",
-				 __func__, ev->type, at_state->ConState);
-			return;
-		}
-		if ((rcode == RSP_ANY || rcode == ev->type)
-		    && ((int) at_state->ConState >= rep->min_ConState)
-		    && (rep->max_ConState < 0
-			|| (int) at_state->ConState <= rep->max_ConState)
-		    && (rep->parameter < 0 || rep->parameter == ev->parameter))
-			break;
-	}
-
-	p_command = rep->command;
-
-	at_state->waiting = 0;
-	for (curact = 0; curact < MAXACT; ++curact) {
-		/* The row tells us what we should do  ..
-		 */
-		do_action(rep->action[curact], cs, bcs, &at_state, &p_command,
-			  &genresp, &resp_code, ev);
-		if (!at_state)
-			/* at_state destroyed by disconnect */
-			return;
-	}
-
-	/* Jump to the next con-state regarding the array */
-	if (rep->new_ConState >= 0)
-		at_state->ConState = rep->new_ConState;
-
-	if (genresp) {
-		spin_lock_irqsave(&cs->lock, flags);
-		at_state->timer_expires = 0;
-		at_state->timer_active = 0;
-		spin_unlock_irqrestore(&cs->lock, flags);
-		gigaset_add_event(cs, at_state, resp_code, NULL, 0, NULL);
-	} else {
-		/* Send command to modem if not NULL... */
-		if (p_command) {
-			if (cs->connected)
-				send_command(cs, p_command, at_state);
-			else
-				gigaset_add_event(cs, at_state, RSP_NODEV,
-						  NULL, 0, NULL);
-		}
-
-		spin_lock_irqsave(&cs->lock, flags);
-		if (!rep->timeout) {
-			at_state->timer_expires = 0;
-			at_state->timer_active = 0;
-		} else if (rep->timeout > 0) { /* new timeout */
-			at_state->timer_expires = rep->timeout * 10;
-			at_state->timer_active = 1;
-			++at_state->timer_index;
-		}
-		spin_unlock_irqrestore(&cs->lock, flags);
-	}
-}
-
-static void schedule_sequence(struct cardstate *cs,
-			      struct at_state_t *at_state, int sequence)
-{
-	cs->cur_at_seq = sequence;
-	gigaset_add_event(cs, at_state, RSP_INIT, NULL, sequence, NULL);
-}
-
-static void process_command_flags(struct cardstate *cs)
-{
-	struct at_state_t *at_state = NULL;
-	struct bc_state *bcs;
-	int i;
-	int sequence;
-	unsigned long flags;
-
-	cs->commands_pending = 0;
-
-	if (cs->cur_at_seq) {
-		gig_dbg(DEBUG_EVENT, "not searching scheduled commands: busy");
-		return;
-	}
-
-	gig_dbg(DEBUG_EVENT, "searching scheduled commands");
-
-	sequence = SEQ_NONE;
-
-	/* clear pending_commands and hangup channels on shutdown */
-	if (cs->at_state.pending_commands & PC_SHUTDOWN) {
-		cs->at_state.pending_commands &= ~PC_CIDMODE;
-		for (i = 0; i < cs->channels; ++i) {
-			bcs = cs->bcs + i;
-			at_state = &bcs->at_state;
-			at_state->pending_commands &=
-				~(PC_DLE1 | PC_ACCEPT | PC_DIAL);
-			if (at_state->cid > 0)
-				at_state->pending_commands |= PC_HUP;
-			if (at_state->pending_commands & PC_CID) {
-				at_state->pending_commands |= PC_NOCID;
-				at_state->pending_commands &= ~PC_CID;
-			}
-		}
-	}
-
-	/* clear pending_commands and hangup channels on reset */
-	if (cs->at_state.pending_commands & PC_INIT) {
-		cs->at_state.pending_commands &= ~PC_CIDMODE;
-		for (i = 0; i < cs->channels; ++i) {
-			bcs = cs->bcs + i;
-			at_state = &bcs->at_state;
-			at_state->pending_commands &=
-				~(PC_DLE1 | PC_ACCEPT | PC_DIAL);
-			if (at_state->cid > 0)
-				at_state->pending_commands |= PC_HUP;
-			if (cs->mstate == MS_RECOVER) {
-				if (at_state->pending_commands & PC_CID) {
-					at_state->pending_commands |= PC_NOCID;
-					at_state->pending_commands &= ~PC_CID;
-				}
-			}
-		}
-	}
-
-	/* only switch back to unimodem mode if no commands are pending and
-	 * no channels are up */
-	spin_lock_irqsave(&cs->lock, flags);
-	if (cs->at_state.pending_commands == PC_UMMODE
-	    && !cs->cidmode
-	    && list_empty(&cs->temp_at_states)
-	    && cs->mode == M_CID) {
-		sequence = SEQ_UMMODE;
-		at_state = &cs->at_state;
-		for (i = 0; i < cs->channels; ++i) {
-			bcs = cs->bcs + i;
-			if (bcs->at_state.pending_commands ||
-			    bcs->at_state.cid > 0) {
-				sequence = SEQ_NONE;
-				break;
-			}
-		}
-	}
-	spin_unlock_irqrestore(&cs->lock, flags);
-	cs->at_state.pending_commands &= ~PC_UMMODE;
-	if (sequence != SEQ_NONE) {
-		schedule_sequence(cs, at_state, sequence);
-		return;
-	}
-
-	for (i = 0; i < cs->channels; ++i) {
-		bcs = cs->bcs + i;
-		if (bcs->at_state.pending_commands & PC_HUP) {
-			if (cs->dle) {
-				cs->curchannel = bcs->channel;
-				schedule_sequence(cs, &cs->at_state, SEQ_DLE0);
-				return;
-			}
-			bcs->at_state.pending_commands &= ~PC_HUP;
-			if (bcs->at_state.pending_commands & PC_CID) {
-				/* not yet dialing: PC_NOCID is sufficient */
-				bcs->at_state.pending_commands |= PC_NOCID;
-				bcs->at_state.pending_commands &= ~PC_CID;
-			} else {
-				schedule_sequence(cs, &bcs->at_state, SEQ_HUP);
-				return;
-			}
-		}
-		if (bcs->at_state.pending_commands & PC_NOCID) {
-			bcs->at_state.pending_commands &= ~PC_NOCID;
-			cs->curchannel = bcs->channel;
-			schedule_sequence(cs, &cs->at_state, SEQ_NOCID);
-			return;
-		} else if (bcs->at_state.pending_commands & PC_DLE0) {
-			bcs->at_state.pending_commands &= ~PC_DLE0;
-			cs->curchannel = bcs->channel;
-			schedule_sequence(cs, &cs->at_state, SEQ_DLE0);
-			return;
-		}
-	}
-
-	list_for_each_entry(at_state, &cs->temp_at_states, list)
-		if (at_state->pending_commands & PC_HUP) {
-			at_state->pending_commands &= ~PC_HUP;
-			schedule_sequence(cs, at_state, SEQ_HUP);
-			return;
-		}
-
-	if (cs->at_state.pending_commands & PC_INIT) {
-		cs->at_state.pending_commands &= ~PC_INIT;
-		cs->dle = 0;
-		cs->inbuf->inputstate = INS_command;
-		schedule_sequence(cs, &cs->at_state, SEQ_INIT);
-		return;
-	}
-	if (cs->at_state.pending_commands & PC_SHUTDOWN) {
-		cs->at_state.pending_commands &= ~PC_SHUTDOWN;
-		schedule_sequence(cs, &cs->at_state, SEQ_SHUTDOWN);
-		return;
-	}
-	if (cs->at_state.pending_commands & PC_CIDMODE) {
-		cs->at_state.pending_commands &= ~PC_CIDMODE;
-		if (cs->mode == M_UNIMODEM) {
-			cs->retry_count = 1;
-			schedule_sequence(cs, &cs->at_state, SEQ_CIDMODE);
-			return;
-		}
-	}
-
-	for (i = 0; i < cs->channels; ++i) {
-		bcs = cs->bcs + i;
-		if (bcs->at_state.pending_commands & PC_DLE1) {
-			bcs->at_state.pending_commands &= ~PC_DLE1;
-			cs->curchannel = bcs->channel;
-			schedule_sequence(cs, &cs->at_state, SEQ_DLE1);
-			return;
-		}
-		if (bcs->at_state.pending_commands & PC_ACCEPT) {
-			bcs->at_state.pending_commands &= ~PC_ACCEPT;
-			schedule_sequence(cs, &bcs->at_state, SEQ_ACCEPT);
-			return;
-		}
-		if (bcs->at_state.pending_commands & PC_DIAL) {
-			bcs->at_state.pending_commands &= ~PC_DIAL;
-			schedule_sequence(cs, &bcs->at_state, SEQ_DIAL);
-			return;
-		}
-		if (bcs->at_state.pending_commands & PC_CID) {
-			switch (cs->mode) {
-			case M_UNIMODEM:
-				cs->at_state.pending_commands |= PC_CIDMODE;
-				gig_dbg(DEBUG_EVENT, "Scheduling PC_CIDMODE");
-				cs->commands_pending = 1;
-				return;
-			case M_UNKNOWN:
-				schedule_init(cs, MS_INIT);
-				return;
-			}
-			bcs->at_state.pending_commands &= ~PC_CID;
-			cs->curchannel = bcs->channel;
-			cs->retry_count = 2;
-			schedule_sequence(cs, &cs->at_state, SEQ_CID);
-			return;
-		}
-	}
-}
-
-static void process_events(struct cardstate *cs)
-{
-	struct event_t *ev;
-	unsigned head, tail;
-	int i;
-	int check_flags = 0;
-	int was_busy;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cs->ev_lock, flags);
-	head = cs->ev_head;
-
-	for (i = 0; i < 2 * MAX_EVENTS; ++i) {
-		tail = cs->ev_tail;
-		if (tail == head) {
-			if (!check_flags && !cs->commands_pending)
-				break;
-			check_flags = 0;
-			spin_unlock_irqrestore(&cs->ev_lock, flags);
-			process_command_flags(cs);
-			spin_lock_irqsave(&cs->ev_lock, flags);
-			tail = cs->ev_tail;
-			if (tail == head) {
-				if (!cs->commands_pending)
-					break;
-				continue;
-			}
-		}
-
-		ev = cs->events + head;
-		was_busy = cs->cur_at_seq != SEQ_NONE;
-		spin_unlock_irqrestore(&cs->ev_lock, flags);
-		process_event(cs, ev);
-		spin_lock_irqsave(&cs->ev_lock, flags);
-		kfree(ev->ptr);
-		ev->ptr = NULL;
-		if (was_busy && cs->cur_at_seq == SEQ_NONE)
-			check_flags = 1;
-
-		head = (head + 1) % MAX_EVENTS;
-		cs->ev_head = head;
-	}
-
-	spin_unlock_irqrestore(&cs->ev_lock, flags);
-
-	if (i == 2 * MAX_EVENTS) {
-		dev_err(cs->dev,
-			"infinite loop in process_events; aborting.\n");
-	}
-}
-
-/* tasklet scheduled on any event received from the Gigaset device
- * parameter:
- *	data	ISDN controller state structure
- */
-void gigaset_handle_event(unsigned long data)
-{
-	struct cardstate *cs = (struct cardstate *) data;
-
-	/* handle incoming data on control/common channel */
-	if (cs->inbuf->head != cs->inbuf->tail) {
-		gig_dbg(DEBUG_INTR, "processing new data");
-		cs->ops->handle_input(cs->inbuf);
-	}
-
-	process_events(cs);
-}
diff --git a/drivers/staging/isdn/gigaset/gigaset.h b/drivers/staging/isdn/gigaset/gigaset.h
deleted file mode 100644
index 0ecc2b5ea553..000000000000
--- a/drivers/staging/isdn/gigaset/gigaset.h
+++ /dev/null
@@ -1,827 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Siemens Gigaset 307x driver
- * Common header file for all connection variants
- *
- * Written by Stefan Eilers
- *        and Hansjoerg Lipp <hjlipp@web.de>
- *
- * =====================================================================
- * =====================================================================
- */
-
-#ifndef GIGASET_H
-#define GIGASET_H
-
-/* define global prefix for pr_ macros in linux/kernel.h */
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <linux/ctype.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/ppp_defs.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/list.h>
-#include <linux/atomic.h>
-
-#define GIG_VERSION {0, 5, 0, 0}
-#define GIG_COMPAT  {0, 4, 0, 0}
-
-#define MAX_REC_PARAMS 10	/* Max. number of params in response string */
-#define MAX_RESP_SIZE 511	/* Max. size of a response string */
-
-#define MAX_EVENTS 64		/* size of event queue */
-
-#define RBUFSIZE 8192
-
-#define GIG_TICK 100		/* in milliseconds */
-
-/* timeout values (unit: 1 sec) */
-#define INIT_TIMEOUT 1
-
-/* timeout values (unit: 0.1 sec) */
-#define RING_TIMEOUT 3		/* for additional parameters to RING */
-#define BAS_TIMEOUT 20		/* for response to Base USB ops */
-#define ATRDY_TIMEOUT 3		/* for HD_READY_SEND_ATDATA */
-
-#define BAS_RETRY 3		/* max. retries for base USB ops */
-
-#define MAXACT 3
-
-extern int gigaset_debuglevel;	/* "needs" cast to (enum debuglevel) */
-
-/* debug flags, combine by adding/bitwise OR */
-enum debuglevel {
-	DEBUG_INTR	  = 0x00008, /* interrupt processing */
-	DEBUG_CMD	  = 0x00020, /* sent/received LL commands */
-	DEBUG_STREAM	  = 0x00040, /* application data stream I/O events */
-	DEBUG_STREAM_DUMP = 0x00080, /* application data stream content */
-	DEBUG_LLDATA	  = 0x00100, /* sent/received LL data */
-	DEBUG_EVENT	  = 0x00200, /* event processing */
-	DEBUG_HDLC	  = 0x00800, /* M10x HDLC processing */
-	DEBUG_CHANNEL	  = 0x01000, /* channel allocation/deallocation */
-	DEBUG_TRANSCMD	  = 0x02000, /* AT-COMMANDS+RESPONSES */
-	DEBUG_MCMD	  = 0x04000, /* COMMANDS THAT ARE SENT VERY OFTEN */
-	DEBUG_INIT	  = 0x08000, /* (de)allocation+initialization of data
-					structures */
-	DEBUG_SUSPEND	  = 0x10000, /* suspend/resume processing */
-	DEBUG_OUTPUT	  = 0x20000, /* output to device */
-	DEBUG_ISO	  = 0x40000, /* isochronous transfers */
-	DEBUG_IF	  = 0x80000, /* character device operations */
-	DEBUG_USBREQ	  = 0x100000, /* USB communication (except payload
-					 data) */
-	DEBUG_LOCKCMD	  = 0x200000, /* AT commands and responses when
-					 MS_LOCKED */
-
-	DEBUG_ANY	  = 0x3fffff, /* print message if any of the others is
-					 activated */
-};
-
-#ifdef CONFIG_GIGASET_DEBUG
-
-#define gig_dbg(level, format, arg...)					\
-	do {								\
-		if (unlikely(((enum debuglevel)gigaset_debuglevel) & (level))) \
-			printk(KERN_DEBUG KBUILD_MODNAME ": " format "\n", \
-			       ## arg);					\
-	} while (0)
-#define DEBUG_DEFAULT (DEBUG_TRANSCMD | DEBUG_CMD | DEBUG_USBREQ)
-
-#else
-
-#define gig_dbg(level, format, arg...) do {} while (0)
-#define DEBUG_DEFAULT 0
-
-#endif
-
-void gigaset_dbg_buffer(enum debuglevel level, const unsigned char *msg,
-			size_t len, const unsigned char *buf);
-
-/* connection state */
-#define ZSAU_NONE			0
-#define ZSAU_PROCEEDING			1
-#define ZSAU_CALL_DELIVERED		2
-#define ZSAU_ACTIVE			3
-#define ZSAU_DISCONNECT_IND		4
-#define ZSAU_NULL			5
-#define ZSAU_DISCONNECT_REQ		6
-#define ZSAU_UNKNOWN			-1
-
-/* USB control transfer requests */
-#define OUT_VENDOR_REQ	(USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT)
-#define IN_VENDOR_REQ	(USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT)
-
-/* interrupt pipe messages */
-#define HD_B1_FLOW_CONTROL		0x80
-#define HD_B2_FLOW_CONTROL		0x81
-#define HD_RECEIVEATDATA_ACK		(0x35)		/* 3070 */
-#define HD_READY_SEND_ATDATA		(0x36)		/* 3070 */
-#define HD_OPEN_ATCHANNEL_ACK		(0x37)		/* 3070 */
-#define HD_CLOSE_ATCHANNEL_ACK		(0x38)		/* 3070 */
-#define HD_DEVICE_INIT_OK		(0x11)		/* ISurf USB + 3070 */
-#define HD_OPEN_B1CHANNEL_ACK		(0x51)		/* ISurf USB + 3070 */
-#define HD_OPEN_B2CHANNEL_ACK		(0x52)		/* ISurf USB + 3070 */
-#define HD_CLOSE_B1CHANNEL_ACK		(0x53)		/* ISurf USB + 3070 */
-#define HD_CLOSE_B2CHANNEL_ACK		(0x54)		/* ISurf USB + 3070 */
-#define HD_SUSPEND_END			(0x61)		/* ISurf USB */
-#define HD_RESET_INTERRUPT_PIPE_ACK	(0xFF)		/* ISurf USB + 3070 */
-
-/* control requests */
-#define	HD_OPEN_B1CHANNEL		(0x23)		/* ISurf USB + 3070 */
-#define	HD_CLOSE_B1CHANNEL		(0x24)		/* ISurf USB + 3070 */
-#define	HD_OPEN_B2CHANNEL		(0x25)		/* ISurf USB + 3070 */
-#define	HD_CLOSE_B2CHANNEL		(0x26)		/* ISurf USB + 3070 */
-#define HD_RESET_INTERRUPT_PIPE		(0x27)		/* ISurf USB + 3070 */
-#define	HD_DEVICE_INIT_ACK		(0x34)		/* ISurf USB + 3070 */
-#define	HD_WRITE_ATMESSAGE		(0x12)		/* 3070 */
-#define	HD_READ_ATMESSAGE		(0x13)		/* 3070 */
-#define	HD_OPEN_ATCHANNEL		(0x28)		/* 3070 */
-#define	HD_CLOSE_ATCHANNEL		(0x29)		/* 3070 */
-
-/* number of B channels supported by base driver */
-#define BAS_CHANNELS	2
-
-/* USB frames for isochronous transfer */
-#define BAS_FRAMETIME	1	/* number of milliseconds between frames */
-#define BAS_NUMFRAMES	8	/* number of frames per URB */
-#define BAS_MAXFRAME	16	/* allocated bytes per frame */
-#define BAS_NORMFRAME	8	/* send size without flow control */
-#define BAS_HIGHFRAME	10	/* "    "    with positive flow control */
-#define BAS_LOWFRAME	5	/* "    "    with negative flow control */
-#define BAS_CORRFRAMES	4	/* flow control multiplicator */
-
-#define BAS_INBUFSIZE	(BAS_MAXFRAME * BAS_NUMFRAMES)	/* size of isoc in buf
-							 * per URB */
-#define BAS_OUTBUFSIZE	4096		/* size of common isoc out buffer */
-#define BAS_OUTBUFPAD	BAS_MAXFRAME	/* size of pad area for isoc out buf */
-
-#define BAS_INURBS	3
-#define BAS_OUTURBS	3
-
-/* variable commands in struct bc_state */
-#define AT_ISO		0
-#define AT_DIAL		1
-#define AT_MSN		2
-#define AT_BC		3
-#define AT_PROTO	4
-#define AT_TYPE		5
-#define AT_CLIP		6
-/* total number */
-#define AT_NUM		7
-
-/* variables in struct at_state_t */
-/* - numeric */
-#define VAR_ZSAU	0
-#define VAR_ZDLE	1
-#define VAR_ZCTP	2
-/* total number */
-#define VAR_NUM		3
-/* - string */
-#define STR_NMBR	0
-#define STR_ZCPN	1
-#define STR_ZCON	2
-#define STR_ZBC		3
-#define STR_ZHLC	4
-/* total number */
-#define STR_NUM		5
-
-/* event types */
-#define EV_TIMEOUT	-105
-#define EV_IF_VER	-106
-#define EV_PROC_CIDMODE	-107
-#define EV_SHUTDOWN	-108
-#define EV_START	-110
-#define EV_STOP		-111
-#define EV_IF_LOCK	-112
-#define EV_ACCEPT	-114
-#define EV_DIAL		-115
-#define EV_HUP		-116
-#define EV_BC_OPEN	-117
-#define EV_BC_CLOSED	-118
-
-/* input state */
-#define INS_command	0x0001	/* receiving messages (not payload data) */
-#define INS_DLE_char	0x0002	/* DLE flag received (in DLE mode) */
-#define INS_byte_stuff	0x0004
-#define INS_have_data	0x0008
-#define INS_DLE_command	0x0020	/* DLE message start (<DLE> X) received */
-#define INS_flag_hunt	0x0040
-
-/* channel state */
-#define CHS_D_UP	0x01
-#define CHS_B_UP	0x02
-#define CHS_NOTIFY_LL	0x04
-
-#define ICALL_REJECT	0
-#define ICALL_ACCEPT	1
-#define ICALL_IGNORE	2
-
-/* device state */
-#define MS_UNINITIALIZED	0
-#define MS_INIT			1
-#define MS_LOCKED		2
-#define MS_SHUTDOWN		3
-#define MS_RECOVER		4
-#define MS_READY		5
-
-/* mode */
-#define M_UNKNOWN	0
-#define M_CONFIG	1
-#define M_UNIMODEM	2
-#define M_CID		3
-
-/* start mode */
-#define SM_LOCKED	0
-#define SM_ISDN		1 /* default */
-
-/* layer 2 protocols (AT^SBPR=...) */
-#define L2_BITSYNC	0
-#define L2_HDLC		1
-#define L2_VOICE	2
-
-struct gigaset_ops;
-struct gigaset_driver;
-
-struct usb_cardstate;
-struct ser_cardstate;
-struct bas_cardstate;
-
-struct bc_state;
-struct usb_bc_state;
-struct ser_bc_state;
-struct bas_bc_state;
-
-struct reply_t {
-	int	resp_code;	/* RSP_XXXX */
-	int	min_ConState;	/* <0 => ignore */
-	int	max_ConState;	/* <0 => ignore */
-	int	parameter;	/* e.g. ZSAU_XXXX <0: ignore*/
-	int	new_ConState;	/* <0 => ignore */
-	int	timeout;	/* >0 => *HZ; <=0 => TOUT_XXXX*/
-	int	action[MAXACT];	/* ACT_XXXX */
-	char	*command;	/* NULL==none */
-};
-
-extern struct reply_t gigaset_tab_cid[];
-extern struct reply_t gigaset_tab_nocid[];
-
-struct inbuf_t {
-	struct cardstate	*cs;
-	int			inputstate;
-	int			head, tail;
-	unsigned char		data[RBUFSIZE];
-};
-
-/* isochronous write buffer structure
- * circular buffer with pad area for extraction of complete USB frames
- * - data[read..nextread-1] is valid data already submitted to the USB subsystem
- * - data[nextread..write-1] is valid data yet to be sent
- * - data[write] is the next byte to write to
- *   - in byte-oriented L2 procotols, it is completely free
- *   - in bit-oriented L2 procotols, it may contain a partial byte of valid data
- * - data[write+1..read-1] is free
- * - wbits is the number of valid data bits in data[write], starting at the LSB
- * - writesem is the semaphore for writing to the buffer:
- *   if writesem <= 0, data[write..read-1] is currently being written to
- * - idle contains the byte value to repeat when the end of valid data is
- *   reached; if nextread==write (buffer contains no data to send), either the
- *   BAS_OUTBUFPAD bytes immediately before data[write] (if
- *   write>=BAS_OUTBUFPAD) or those of the pad area (if write<BAS_OUTBUFPAD)
- *   are also filled with that value
- */
-struct isowbuf_t {
-	int		read;
-	int		nextread;
-	int		write;
-	atomic_t	writesem;
-	int		wbits;
-	unsigned char	data[BAS_OUTBUFSIZE + BAS_OUTBUFPAD];
-	unsigned char	idle;
-};
-
-/* isochronous write URB context structure
- * data to be stored along with the URB and retrieved when it is returned
- * as completed by the USB subsystem
- * - urb: pointer to the URB itself
- * - bcs: pointer to the B Channel control structure
- * - limit: end of write buffer area covered by this URB
- * - status: URB completion status
- */
-struct isow_urbctx_t {
-	struct urb *urb;
-	struct bc_state *bcs;
-	int limit;
-	int status;
-};
-
-/* AT state structure
- * data associated with the state of an ISDN connection, whether or not
- * it is currently assigned a B channel
- */
-struct at_state_t {
-	struct list_head	list;
-	int			waiting;
-	int			getstring;
-	unsigned		timer_index;
-	unsigned long		timer_expires;
-	int			timer_active;
-	unsigned int		ConState;	/* State of connection */
-	struct reply_t		*replystruct;
-	int			cid;
-	int			int_var[VAR_NUM];	/* see VAR_XXXX */
-	char			*str_var[STR_NUM];	/* see STR_XXXX */
-	unsigned		pending_commands;	/* see PC_XXXX */
-	unsigned		seq_index;
-
-	struct cardstate	*cs;
-	struct bc_state		*bcs;
-};
-
-struct event_t {
-	int type;
-	void *ptr, *arg;
-	int parameter;
-	int cid;
-	struct at_state_t *at_state;
-};
-
-/* This buffer holds all information about the used B-Channel */
-struct bc_state {
-	struct sk_buff *tx_skb;		/* Current transfer buffer to modem */
-	struct sk_buff_head squeue;	/* B-Channel send Queue */
-
-	/* Variables for debugging .. */
-	int corrupted;			/* Counter for corrupted packages */
-	int trans_down;			/* Counter of packages (downstream) */
-	int trans_up;			/* Counter of packages (upstream) */
-
-	struct at_state_t at_state;
-
-	/* receive buffer */
-	unsigned rx_bufsize;		/* max size accepted by application */
-	struct sk_buff *rx_skb;
-	__u16 rx_fcs;
-	int inputstate;			/* see INS_XXXX */
-
-	int channel;
-
-	struct cardstate *cs;
-
-	unsigned chstate;		/* bitmap (CHS_*) */
-	int ignore;
-	unsigned proto2;		/* layer 2 protocol (L2_*) */
-	char *commands[AT_NUM];		/* see AT_XXXX */
-
-#ifdef CONFIG_GIGASET_DEBUG
-	int emptycount;
-#endif
-	int busy;
-	int use_count;
-
-	/* private data of hardware drivers */
-	union {
-		struct ser_bc_state *ser;	/* serial hardware driver */
-		struct usb_bc_state *usb;	/* usb hardware driver (m105) */
-		struct bas_bc_state *bas;	/* usb hardware driver (base) */
-	} hw;
-
-	void *ap;			/* associated LL application */
-	int apconnstate;		/* LL application connection state */
-	spinlock_t aplock;
-};
-
-struct cardstate {
-	struct gigaset_driver *driver;
-	unsigned minor_index;
-	struct device *dev;
-	struct device *tty_dev;
-	unsigned flags;
-
-	const struct gigaset_ops *ops;
-
-	/* Stuff to handle communication */
-	wait_queue_head_t waitqueue;
-	int waiting;
-	int mode;			/* see M_XXXX */
-	int mstate;			/* Modem state: see MS_XXXX */
-					/* only changed by the event layer */
-	int cmd_result;
-
-	int channels;
-	struct bc_state *bcs;		/* Array of struct bc_state */
-
-	int onechannel;			/* data and commands transmitted in one
-					   stream (M10x) */
-
-	spinlock_t lock;
-	struct at_state_t at_state;	/* at_state_t for cid == 0 */
-	struct list_head temp_at_states;/* list of temporary "struct
-					   at_state_t"s without B channel */
-
-	struct inbuf_t *inbuf;
-
-	struct cmdbuf_t *cmdbuf, *lastcmdbuf;
-	spinlock_t cmdlock;
-	unsigned curlen, cmdbytes;
-
-	struct tty_port port;
-	struct tasklet_struct if_wake_tasklet;
-	unsigned control_state;
-
-	unsigned fwver[4];
-	int gotfwver;
-
-	unsigned running;		/* !=0 if events are handled */
-	unsigned connected;		/* !=0 if hardware is connected */
-	unsigned isdn_up;		/* !=0 after gigaset_isdn_start() */
-
-	unsigned cidmode;
-
-	int myid;			/* id for communication with LL */
-	void *iif;			/* LL interface structure */
-	unsigned short hw_hdr_len;	/* headroom needed in data skbs */
-
-	struct reply_t *tabnocid;
-	struct reply_t *tabcid;
-	int cs_init;
-	int ignoreframes;		/* frames to ignore after setting up the
-					   B channel */
-	struct mutex mutex;		/* locks this structure:
-					 *   connected is not changed,
-					 *   hardware_up is not changed,
-					 *   MState is not changed to or from
-					 *   MS_LOCKED */
-
-	struct timer_list timer;
-	int retry_count;
-	int dle;			/* !=0 if DLE mode is active
-					   (ZDLE=1 received -- M10x only) */
-	int cur_at_seq;			/* sequence of AT commands being
-					   processed */
-	int curchannel;			/* channel those commands are meant
-					   for */
-	int commands_pending;		/* flag(s) in xxx.commands_pending have
-					   been set */
-	struct tasklet_struct
-		event_tasklet;		/* tasklet for serializing AT commands.
-					 * Scheduled
-					 *   -> for modem reponses (and
-					 *      incoming data for M10x)
-					 *   -> on timeout
-					 *   -> after setting bits in
-					 *      xxx.at_state.pending_command
-					 *      (e.g. command from LL) */
-	struct tasklet_struct
-		write_tasklet;		/* tasklet for serial output
-					 * (not used in base driver) */
-
-	/* event queue */
-	struct event_t events[MAX_EVENTS];
-	unsigned ev_tail, ev_head;
-	spinlock_t ev_lock;
-
-	/* current modem response */
-	unsigned char respdata[MAX_RESP_SIZE + 1];
-	unsigned cbytes;
-
-	/* private data of hardware drivers */
-	union {
-		struct usb_cardstate *usb; /* USB hardware driver (m105) */
-		struct ser_cardstate *ser; /* serial hardware driver */
-		struct bas_cardstate *bas; /* USB hardware driver (base) */
-	} hw;
-};
-
-struct gigaset_driver {
-	struct list_head list;
-	spinlock_t lock;		/* locks minor tables and blocked */
-	struct tty_driver *tty;
-	unsigned have_tty;
-	unsigned minor;
-	unsigned minors;
-	struct cardstate *cs;
-	int blocked;
-
-	const struct gigaset_ops *ops;
-	struct module *owner;
-};
-
-struct cmdbuf_t {
-	struct cmdbuf_t *next, *prev;
-	int len, offset;
-	struct tasklet_struct *wake_tasklet;
-	unsigned char buf[0];
-};
-
-struct bas_bc_state {
-	/* isochronous output state */
-	int		running;
-	atomic_t	corrbytes;
-	spinlock_t	isooutlock;
-	struct isow_urbctx_t	isoouturbs[BAS_OUTURBS];
-	struct isow_urbctx_t	*isooutdone, *isooutfree, *isooutovfl;
-	struct isowbuf_t	*isooutbuf;
-	unsigned numsub;		/* submitted URB counter
-					   (for diagnostic messages only) */
-	struct tasklet_struct	sent_tasklet;
-
-	/* isochronous input state */
-	spinlock_t isoinlock;
-	struct urb *isoinurbs[BAS_INURBS];
-	unsigned char isoinbuf[BAS_INBUFSIZE * BAS_INURBS];
-	struct urb *isoindone;		/* completed isoc read URB */
-	int isoinstatus;		/* status of completed URB */
-	int loststatus;			/* status of dropped URB */
-	unsigned isoinlost;		/* number of bytes lost */
-	/* state of bit unstuffing algorithm
-	   (in addition to BC_state.inputstate) */
-	unsigned seqlen;		/* number of '1' bits not yet
-					   unstuffed */
-	unsigned inbyte, inbits;	/* collected bits for next byte */
-	/* statistics */
-	unsigned goodbytes;		/* bytes correctly received */
-	unsigned alignerrs;		/* frames with incomplete byte at end */
-	unsigned fcserrs;		/* FCS errors */
-	unsigned frameerrs;		/* framing errors */
-	unsigned giants;		/* long frames */
-	unsigned runts;			/* short frames */
-	unsigned aborts;		/* HDLC aborts */
-	unsigned shared0s;		/* '0' bits shared between flags */
-	unsigned stolen0s;		/* '0' stuff bits also serving as
-					   leading flag bits */
-	struct tasklet_struct rcvd_tasklet;
-};
-
-struct gigaset_ops {
-	/* Called from ev-layer.c/interface.c for sending AT commands to the
-	   device */
-	int (*write_cmd)(struct cardstate *cs, struct cmdbuf_t *cb);
-
-	/* Called from interface.c for additional device control */
-	int (*write_room)(struct cardstate *cs);
-	int (*chars_in_buffer)(struct cardstate *cs);
-	int (*brkchars)(struct cardstate *cs, const unsigned char buf[6]);
-
-	/* Called from ev-layer.c after setting up connection
-	 * Should call gigaset_bchannel_up(), when finished. */
-	int (*init_bchannel)(struct bc_state *bcs);
-
-	/* Called from ev-layer.c after hanging up
-	 * Should call gigaset_bchannel_down(), when finished. */
-	int (*close_bchannel)(struct bc_state *bcs);
-
-	/* Called by gigaset_initcs() for setting up bcs->hw.xxx */
-	int (*initbcshw)(struct bc_state *bcs);
-
-	/* Called by gigaset_freecs() for freeing bcs->hw.xxx */
-	void (*freebcshw)(struct bc_state *bcs);
-
-	/* Called by gigaset_bchannel_down() for resetting bcs->hw.xxx */
-	void (*reinitbcshw)(struct bc_state *bcs);
-
-	/* Called by gigaset_initcs() for setting up cs->hw.xxx */
-	int (*initcshw)(struct cardstate *cs);
-
-	/* Called by gigaset_freecs() for freeing cs->hw.xxx */
-	void (*freecshw)(struct cardstate *cs);
-
-	/* Called from common.c/interface.c for additional serial port
-	   control */
-	int (*set_modem_ctrl)(struct cardstate *cs, unsigned old_state,
-			      unsigned new_state);
-	int (*baud_rate)(struct cardstate *cs, unsigned cflag);
-	int (*set_line_ctrl)(struct cardstate *cs, unsigned cflag);
-
-	/* Called from LL interface to put an skb into the send-queue.
-	 * After sending is completed, gigaset_skb_sent() must be called
-	 * with the skb's link layer header preserved. */
-	int (*send_skb)(struct bc_state *bcs, struct sk_buff *skb);
-
-	/* Called from ev-layer.c to process a block of data
-	 * received through the common/control channel. */
-	void (*handle_input)(struct inbuf_t *inbuf);
-
-};
-
-/* = Common structures and definitions =======================================
- */
-
-/* Parser states for DLE-Event:
- * <DLE-EVENT>: <DLE_FLAG> "X" <EVENT> <DLE_FLAG> "."
- * <DLE_FLAG>:  0x10
- * <EVENT>:     ((a-z)* | (A-Z)* | (0-10)*)+
- */
-#define DLE_FLAG	0x10
-
-/* ===========================================================================
- *  Functions implemented in asyncdata.c
- */
-
-/* Called from LL interface to put an skb into the send queue. */
-int gigaset_m10x_send_skb(struct bc_state *bcs, struct sk_buff *skb);
-
-/* Called from ev-layer.c to process a block of data
- * received through the common/control channel. */
-void gigaset_m10x_input(struct inbuf_t *inbuf);
-
-/* ===========================================================================
- *  Functions implemented in isocdata.c
- */
-
-/* Called from LL interface to put an skb into the send queue. */
-int gigaset_isoc_send_skb(struct bc_state *bcs, struct sk_buff *skb);
-
-/* Called from ev-layer.c to process a block of data
- * received through the common/control channel. */
-void gigaset_isoc_input(struct inbuf_t *inbuf);
-
-/* Called from bas-gigaset.c to process a block of data
- * received through the isochronous channel */
-void gigaset_isoc_receive(unsigned char *src, unsigned count,
-			  struct bc_state *bcs);
-
-/* Called from bas-gigaset.c to put a block of data
- * into the isochronous output buffer */
-int gigaset_isoc_buildframe(struct bc_state *bcs, unsigned char *in, int len);
-
-/* Called from bas-gigaset.c to initialize the isochronous output buffer */
-void gigaset_isowbuf_init(struct isowbuf_t *iwb, unsigned char idle);
-
-/* Called from bas-gigaset.c to retrieve a block of bytes for sending */
-int gigaset_isowbuf_getbytes(struct isowbuf_t *iwb, int size);
-
-/* ===========================================================================
- *  Functions implemented in LL interface
- */
-
-/* Called from common.c for setting up/shutting down with the ISDN subsystem */
-void gigaset_isdn_regdrv(void);
-void gigaset_isdn_unregdrv(void);
-int gigaset_isdn_regdev(struct cardstate *cs, const char *isdnid);
-void gigaset_isdn_unregdev(struct cardstate *cs);
-
-/* Called from hardware module to indicate completion of an skb */
-void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb);
-void gigaset_skb_rcvd(struct bc_state *bcs, struct sk_buff *skb);
-void gigaset_isdn_rcv_err(struct bc_state *bcs);
-
-/* Called from common.c/ev-layer.c to indicate events relevant to the LL */
-void gigaset_isdn_start(struct cardstate *cs);
-void gigaset_isdn_stop(struct cardstate *cs);
-int gigaset_isdn_icall(struct at_state_t *at_state);
-void gigaset_isdn_connD(struct bc_state *bcs);
-void gigaset_isdn_hupD(struct bc_state *bcs);
-void gigaset_isdn_connB(struct bc_state *bcs);
-void gigaset_isdn_hupB(struct bc_state *bcs);
-
-/* ===========================================================================
- *  Functions implemented in ev-layer.c
- */
-
-/* tasklet called from common.c to process queued events */
-void gigaset_handle_event(unsigned long data);
-
-/* called from isocdata.c / asyncdata.c
- * when a complete modem response line has been received */
-void gigaset_handle_modem_response(struct cardstate *cs);
-
-/* ===========================================================================
- *  Functions implemented in proc.c
- */
-
-/* initialize sysfs for device */
-void gigaset_init_dev_sysfs(struct cardstate *cs);
-void gigaset_free_dev_sysfs(struct cardstate *cs);
-
-/* ===========================================================================
- *  Functions implemented in common.c/gigaset.h
- */
-
-void gigaset_bcs_reinit(struct bc_state *bcs);
-void gigaset_at_init(struct at_state_t *at_state, struct bc_state *bcs,
-		     struct cardstate *cs, int cid);
-int gigaset_get_channel(struct bc_state *bcs);
-struct bc_state *gigaset_get_free_channel(struct cardstate *cs);
-void gigaset_free_channel(struct bc_state *bcs);
-int gigaset_get_channels(struct cardstate *cs);
-void gigaset_free_channels(struct cardstate *cs);
-void gigaset_block_channels(struct cardstate *cs);
-
-/* Allocate and initialize driver structure. */
-struct gigaset_driver *gigaset_initdriver(unsigned minor, unsigned minors,
-					  const char *procname,
-					  const char *devname,
-					  const struct gigaset_ops *ops,
-					  struct module *owner);
-
-/* Deallocate driver structure. */
-void gigaset_freedriver(struct gigaset_driver *drv);
-
-struct cardstate *gigaset_get_cs_by_tty(struct tty_struct *tty);
-struct cardstate *gigaset_get_cs_by_id(int id);
-void gigaset_blockdriver(struct gigaset_driver *drv);
-
-/* Allocate and initialize card state. Calls hardware dependent
-   gigaset_init[b]cs(). */
-struct cardstate *gigaset_initcs(struct gigaset_driver *drv, int channels,
-				 int onechannel, int ignoreframes,
-				 int cidmode, const char *modulename);
-
-/* Free card state. Calls hardware dependent gigaset_free[b]cs(). */
-void gigaset_freecs(struct cardstate *cs);
-
-/* Tell common.c that hardware and driver are ready. */
-int gigaset_start(struct cardstate *cs);
-
-/* Tell common.c that the device is not present any more. */
-void gigaset_stop(struct cardstate *cs);
-
-/* Tell common.c that the driver is being unloaded. */
-int gigaset_shutdown(struct cardstate *cs);
-
-/* Append event to the queue.
- * Returns NULL on failure or a pointer to the event on success.
- * ptr must be kmalloc()ed (and not be freed by the caller).
- */
-struct event_t *gigaset_add_event(struct cardstate *cs,
-				  struct at_state_t *at_state, int type,
-				  void *ptr, int parameter, void *arg);
-
-/* Called on CONFIG1 command from frontend. */
-int gigaset_enterconfigmode(struct cardstate *cs);
-
-/* cs->lock must not be locked */
-static inline void gigaset_schedule_event(struct cardstate *cs)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&cs->lock, flags);
-	if (cs->running)
-		tasklet_schedule(&cs->event_tasklet);
-	spin_unlock_irqrestore(&cs->lock, flags);
-}
-
-/* Tell common.c that B channel has been closed. */
-/* cs->lock must not be locked */
-static inline void gigaset_bchannel_down(struct bc_state *bcs)
-{
-	gigaset_add_event(bcs->cs, &bcs->at_state, EV_BC_CLOSED, NULL, 0, NULL);
-	gigaset_schedule_event(bcs->cs);
-}
-
-/* Tell common.c that B channel has been opened. */
-/* cs->lock must not be locked */
-static inline void gigaset_bchannel_up(struct bc_state *bcs)
-{
-	gigaset_add_event(bcs->cs, &bcs->at_state, EV_BC_OPEN, NULL, 0, NULL);
-	gigaset_schedule_event(bcs->cs);
-}
-
-/* set up next receive skb for data mode */
-static inline struct sk_buff *gigaset_new_rx_skb(struct bc_state *bcs)
-{
-	struct cardstate *cs = bcs->cs;
-	unsigned short hw_hdr_len = cs->hw_hdr_len;
-
-	if (bcs->ignore) {
-		bcs->rx_skb = NULL;
-	} else {
-		bcs->rx_skb = dev_alloc_skb(bcs->rx_bufsize + hw_hdr_len);
-		if (bcs->rx_skb == NULL)
-			dev_warn(cs->dev, "could not allocate skb\n");
-		else
-			skb_reserve(bcs->rx_skb, hw_hdr_len);
-	}
-	return bcs->rx_skb;
-}
-
-/* append received bytes to inbuf */
-int gigaset_fill_inbuf(struct inbuf_t *inbuf, const unsigned char *src,
-		       unsigned numbytes);
-
-/* ===========================================================================
- *  Functions implemented in interface.c
- */
-
-/* initialize interface */
-void gigaset_if_initdriver(struct gigaset_driver *drv, const char *procname,
-			   const char *devname);
-/* release interface */
-void gigaset_if_freedriver(struct gigaset_driver *drv);
-/* add minor */
-void gigaset_if_init(struct cardstate *cs);
-/* remove minor */
-void gigaset_if_free(struct cardstate *cs);
-/* device received data */
-void gigaset_if_receive(struct cardstate *cs,
-			unsigned char *buffer, size_t len);
-
-#endif
diff --git a/drivers/staging/isdn/gigaset/interface.c b/drivers/staging/isdn/gigaset/interface.c
deleted file mode 100644
index 17fa615a8c68..000000000000
--- a/drivers/staging/isdn/gigaset/interface.c
+++ /dev/null
@@ -1,613 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * interface to user space for the gigaset driver
- *
- * Copyright (c) 2004 by Hansjoerg Lipp <hjlipp@web.de>
- *
- * =====================================================================
- * =====================================================================
- */
-
-#include "gigaset.h"
-#include <linux/gigaset_dev.h>
-#include <linux/tty_flip.h>
-#include <linux/module.h>
-
-/*** our ioctls ***/
-
-static int if_lock(struct cardstate *cs, int *arg)
-{
-	int cmd = *arg;
-
-	gig_dbg(DEBUG_IF, "%u: if_lock (%d)", cs->minor_index, cmd);
-
-	if (cmd > 1)
-		return -EINVAL;
-
-	if (cmd < 0) {
-		*arg = cs->mstate == MS_LOCKED;
-		return 0;
-	}
-
-	if (!cmd && cs->mstate == MS_LOCKED && cs->connected) {
-		cs->ops->set_modem_ctrl(cs, 0, TIOCM_DTR | TIOCM_RTS);
-		cs->ops->baud_rate(cs, B115200);
-		cs->ops->set_line_ctrl(cs, CS8);
-		cs->control_state = TIOCM_DTR | TIOCM_RTS;
-	}
-
-	cs->waiting = 1;
-	if (!gigaset_add_event(cs, &cs->at_state, EV_IF_LOCK,
-			       NULL, cmd, NULL)) {
-		cs->waiting = 0;
-		return -ENOMEM;
-	}
-	gigaset_schedule_event(cs);
-
-	wait_event(cs->waitqueue, !cs->waiting);
-
-	if (cs->cmd_result >= 0) {
-		*arg = cs->cmd_result;
-		return 0;
-	}
-
-	return cs->cmd_result;
-}
-
-static int if_version(struct cardstate *cs, unsigned arg[4])
-{
-	static const unsigned version[4] = GIG_VERSION;
-	static const unsigned compat[4] = GIG_COMPAT;
-	unsigned cmd = arg[0];
-
-	gig_dbg(DEBUG_IF, "%u: if_version (%d)", cs->minor_index, cmd);
-
-	switch (cmd) {
-	case GIGVER_DRIVER:
-		memcpy(arg, version, sizeof version);
-		return 0;
-	case GIGVER_COMPAT:
-		memcpy(arg, compat, sizeof compat);
-		return 0;
-	case GIGVER_FWBASE:
-		cs->waiting = 1;
-		if (!gigaset_add_event(cs, &cs->at_state, EV_IF_VER,
-				       NULL, 0, arg)) {
-			cs->waiting = 0;
-			return -ENOMEM;
-		}
-		gigaset_schedule_event(cs);
-
-		wait_event(cs->waitqueue, !cs->waiting);
-
-		if (cs->cmd_result >= 0)
-			return 0;
-
-		return cs->cmd_result;
-	default:
-		return -EINVAL;
-	}
-}
-
-static int if_config(struct cardstate *cs, int *arg)
-{
-	gig_dbg(DEBUG_IF, "%u: if_config (%d)", cs->minor_index, *arg);
-
-	if (*arg != 1)
-		return -EINVAL;
-
-	if (cs->mstate != MS_LOCKED)
-		return -EBUSY;
-
-	if (!cs->connected) {
-		pr_err("%s: not connected\n", __func__);
-		return -ENODEV;
-	}
-
-	*arg = 0;
-	return gigaset_enterconfigmode(cs);
-}
-
-/*** the terminal driver ***/
-
-static int if_open(struct tty_struct *tty, struct file *filp)
-{
-	struct cardstate *cs;
-
-	gig_dbg(DEBUG_IF, "%d+%d: %s()",
-		tty->driver->minor_start, tty->index, __func__);
-
-	cs = gigaset_get_cs_by_tty(tty);
-	if (!cs || !try_module_get(cs->driver->owner))
-		return -ENODEV;
-
-	if (mutex_lock_interruptible(&cs->mutex)) {
-		module_put(cs->driver->owner);
-		return -ERESTARTSYS;
-	}
-	tty->driver_data = cs;
-
-	++cs->port.count;
-
-	if (cs->port.count == 1) {
-		tty_port_tty_set(&cs->port, tty);
-		cs->port.low_latency = 1;
-	}
-
-	mutex_unlock(&cs->mutex);
-	return 0;
-}
-
-static void if_close(struct tty_struct *tty, struct file *filp)
-{
-	struct cardstate *cs = tty->driver_data;
-
-	if (!cs) { /* happens if we didn't find cs in open */
-		gig_dbg(DEBUG_IF, "%s: no cardstate", __func__);
-		return;
-	}
-
-	gig_dbg(DEBUG_IF, "%u: %s()", cs->minor_index, __func__);
-
-	mutex_lock(&cs->mutex);
-
-	if (!cs->connected)
-		gig_dbg(DEBUG_IF, "not connected");	/* nothing to do */
-	else if (!cs->port.count)
-		dev_warn(cs->dev, "%s: device not opened\n", __func__);
-	else if (!--cs->port.count)
-		tty_port_tty_set(&cs->port, NULL);
-
-	mutex_unlock(&cs->mutex);
-
-	module_put(cs->driver->owner);
-}
-
-static int if_ioctl(struct tty_struct *tty,
-		    unsigned int cmd, unsigned long arg)
-{
-	struct cardstate *cs = tty->driver_data;
-	int retval = -ENODEV;
-	int int_arg;
-	unsigned char buf[6];
-	unsigned version[4];
-
-	gig_dbg(DEBUG_IF, "%u: %s(0x%x)", cs->minor_index, __func__, cmd);
-
-	if (mutex_lock_interruptible(&cs->mutex))
-		return -ERESTARTSYS;
-
-	if (!cs->connected) {
-		gig_dbg(DEBUG_IF, "not connected");
-		retval = -ENODEV;
-	} else {
-		retval = 0;
-		switch (cmd) {
-		case GIGASET_REDIR:
-			retval = get_user(int_arg, (int __user *) arg);
-			if (retval >= 0)
-				retval = if_lock(cs, &int_arg);
-			if (retval >= 0)
-				retval = put_user(int_arg, (int __user *) arg);
-			break;
-		case GIGASET_CONFIG:
-			retval = get_user(int_arg, (int __user *) arg);
-			if (retval >= 0)
-				retval = if_config(cs, &int_arg);
-			if (retval >= 0)
-				retval = put_user(int_arg, (int __user *) arg);
-			break;
-		case GIGASET_BRKCHARS:
-			retval = copy_from_user(&buf,
-						(const unsigned char __user *) arg, 6)
-				? -EFAULT : 0;
-			if (retval >= 0) {
-				gigaset_dbg_buffer(DEBUG_IF, "GIGASET_BRKCHARS",
-						   6, buf);
-				retval = cs->ops->brkchars(cs, buf);
-			}
-			break;
-		case GIGASET_VERSION:
-			retval = copy_from_user(version,
-						(unsigned __user *) arg, sizeof version)
-				? -EFAULT : 0;
-			if (retval >= 0)
-				retval = if_version(cs, version);
-			if (retval >= 0)
-				retval = copy_to_user((unsigned __user *) arg,
-						      version, sizeof version)
-					? -EFAULT : 0;
-			break;
-		default:
-			gig_dbg(DEBUG_IF, "%s: arg not supported - 0x%04x",
-				__func__, cmd);
-			retval = -ENOIOCTLCMD;
-		}
-	}
-
-	mutex_unlock(&cs->mutex);
-
-	return retval;
-}
-
-#ifdef CONFIG_COMPAT
-static long if_compat_ioctl(struct tty_struct *tty,
-		    unsigned int cmd, unsigned long arg)
-{
-	return if_ioctl(tty, cmd, (unsigned long)compat_ptr(arg));
-}
-#endif
-
-static int if_tiocmget(struct tty_struct *tty)
-{
-	struct cardstate *cs = tty->driver_data;
-	int retval;
-
-	gig_dbg(DEBUG_IF, "%u: %s()", cs->minor_index, __func__);
-
-	if (mutex_lock_interruptible(&cs->mutex))
-		return -ERESTARTSYS;
-
-	retval = cs->control_state & (TIOCM_RTS | TIOCM_DTR);
-
-	mutex_unlock(&cs->mutex);
-
-	return retval;
-}
-
-static int if_tiocmset(struct tty_struct *tty,
-		       unsigned int set, unsigned int clear)
-{
-	struct cardstate *cs = tty->driver_data;
-	int retval;
-	unsigned mc;
-
-	gig_dbg(DEBUG_IF, "%u: %s(0x%x, 0x%x)",
-		cs->minor_index, __func__, set, clear);
-
-	if (mutex_lock_interruptible(&cs->mutex))
-		return -ERESTARTSYS;
-
-	if (!cs->connected) {
-		gig_dbg(DEBUG_IF, "not connected");
-		retval = -ENODEV;
-	} else {
-		mc = (cs->control_state | set) & ~clear & (TIOCM_RTS | TIOCM_DTR);
-		retval = cs->ops->set_modem_ctrl(cs, cs->control_state, mc);
-		cs->control_state = mc;
-	}
-
-	mutex_unlock(&cs->mutex);
-
-	return retval;
-}
-
-static int if_write(struct tty_struct *tty, const unsigned char *buf, int count)
-{
-	struct cardstate *cs = tty->driver_data;
-	struct cmdbuf_t *cb;
-	int retval;
-
-	gig_dbg(DEBUG_IF, "%u: %s()", cs->minor_index, __func__);
-
-	if (mutex_lock_interruptible(&cs->mutex))
-		return -ERESTARTSYS;
-
-	if (!cs->connected) {
-		gig_dbg(DEBUG_IF, "not connected");
-		retval = -ENODEV;
-		goto done;
-	}
-	if (cs->mstate != MS_LOCKED) {
-		dev_warn(cs->dev, "can't write to unlocked device\n");
-		retval = -EBUSY;
-		goto done;
-	}
-	if (count <= 0) {
-		/* nothing to do */
-		retval = 0;
-		goto done;
-	}
-
-	cb = kmalloc(sizeof(struct cmdbuf_t) + count, GFP_KERNEL);
-	if (!cb) {
-		dev_err(cs->dev, "%s: out of memory\n", __func__);
-		retval = -ENOMEM;
-		goto done;
-	}
-
-	memcpy(cb->buf, buf, count);
-	cb->len = count;
-	cb->offset = 0;
-	cb->next = NULL;
-	cb->wake_tasklet = &cs->if_wake_tasklet;
-	retval = cs->ops->write_cmd(cs, cb);
-done:
-	mutex_unlock(&cs->mutex);
-	return retval;
-}
-
-static int if_write_room(struct tty_struct *tty)
-{
-	struct cardstate *cs = tty->driver_data;
-	int retval;
-
-	gig_dbg(DEBUG_IF, "%u: %s()", cs->minor_index, __func__);
-
-	if (mutex_lock_interruptible(&cs->mutex))
-		return -ERESTARTSYS;
-
-	if (!cs->connected) {
-		gig_dbg(DEBUG_IF, "not connected");
-		retval = -ENODEV;
-	} else if (cs->mstate != MS_LOCKED) {
-		dev_warn(cs->dev, "can't write to unlocked device\n");
-		retval = -EBUSY;
-	} else
-		retval = cs->ops->write_room(cs);
-
-	mutex_unlock(&cs->mutex);
-
-	return retval;
-}
-
-static int if_chars_in_buffer(struct tty_struct *tty)
-{
-	struct cardstate *cs = tty->driver_data;
-	int retval = 0;
-
-	gig_dbg(DEBUG_IF, "%u: %s()", cs->minor_index, __func__);
-
-	mutex_lock(&cs->mutex);
-
-	if (!cs->connected)
-		gig_dbg(DEBUG_IF, "not connected");
-	else if (cs->mstate != MS_LOCKED)
-		dev_warn(cs->dev, "can't write to unlocked device\n");
-	else
-		retval = cs->ops->chars_in_buffer(cs);
-
-	mutex_unlock(&cs->mutex);
-
-	return retval;
-}
-
-static void if_throttle(struct tty_struct *tty)
-{
-	struct cardstate *cs = tty->driver_data;
-
-	gig_dbg(DEBUG_IF, "%u: %s()", cs->minor_index, __func__);
-
-	mutex_lock(&cs->mutex);
-
-	if (!cs->connected)
-		gig_dbg(DEBUG_IF, "not connected");	/* nothing to do */
-	else
-		gig_dbg(DEBUG_IF, "%s: not implemented\n", __func__);
-
-	mutex_unlock(&cs->mutex);
-}
-
-static void if_unthrottle(struct tty_struct *tty)
-{
-	struct cardstate *cs = tty->driver_data;
-
-	gig_dbg(DEBUG_IF, "%u: %s()", cs->minor_index, __func__);
-
-	mutex_lock(&cs->mutex);
-
-	if (!cs->connected)
-		gig_dbg(DEBUG_IF, "not connected");	/* nothing to do */
-	else
-		gig_dbg(DEBUG_IF, "%s: not implemented\n", __func__);
-
-	mutex_unlock(&cs->mutex);
-}
-
-static void if_set_termios(struct tty_struct *tty, struct ktermios *old)
-{
-	struct cardstate *cs = tty->driver_data;
-	unsigned int iflag;
-	unsigned int cflag;
-	unsigned int old_cflag;
-	unsigned int control_state, new_state;
-
-	gig_dbg(DEBUG_IF, "%u: %s()", cs->minor_index, __func__);
-
-	mutex_lock(&cs->mutex);
-
-	if (!cs->connected) {
-		gig_dbg(DEBUG_IF, "not connected");
-		goto out;
-	}
-
-	iflag = tty->termios.c_iflag;
-	cflag = tty->termios.c_cflag;
-	old_cflag = old ? old->c_cflag : cflag;
-	gig_dbg(DEBUG_IF, "%u: iflag %x cflag %x old %x",
-		cs->minor_index, iflag, cflag, old_cflag);
-
-	/* get a local copy of the current port settings */
-	control_state = cs->control_state;
-
-	/*
-	 * Update baud rate.
-	 * Do not attempt to cache old rates and skip settings,
-	 * disconnects screw such tricks up completely.
-	 * Premature optimization is the root of all evil.
-	 */
-
-	/* reassert DTR and (maybe) RTS on transition from B0 */
-	if ((old_cflag & CBAUD) == B0) {
-		new_state = control_state | TIOCM_DTR;
-		/* don't set RTS if using hardware flow control */
-		if (!(old_cflag & CRTSCTS))
-			new_state |= TIOCM_RTS;
-		gig_dbg(DEBUG_IF, "%u: from B0 - set DTR%s",
-			cs->minor_index,
-			(new_state & TIOCM_RTS) ? " only" : "/RTS");
-		cs->ops->set_modem_ctrl(cs, control_state, new_state);
-		control_state = new_state;
-	}
-
-	cs->ops->baud_rate(cs, cflag & CBAUD);
-
-	if ((cflag & CBAUD) == B0) {
-		/* Drop RTS and DTR */
-		gig_dbg(DEBUG_IF, "%u: to B0 - drop DTR/RTS", cs->minor_index);
-		new_state = control_state & ~(TIOCM_DTR | TIOCM_RTS);
-		cs->ops->set_modem_ctrl(cs, control_state, new_state);
-		control_state = new_state;
-	}
-
-	/*
-	 * Update line control register (LCR)
-	 */
-
-	cs->ops->set_line_ctrl(cs, cflag);
-
-	/* save off the modified port settings */
-	cs->control_state = control_state;
-
-out:
-	mutex_unlock(&cs->mutex);
-}
-
-static const struct tty_operations if_ops = {
-	.open =			if_open,
-	.close =		if_close,
-	.ioctl =		if_ioctl,
-#ifdef CONFIG_COMPAT
-	.compat_ioctl =		if_compat_ioctl,
-#endif
-	.write =		if_write,
-	.write_room =		if_write_room,
-	.chars_in_buffer =	if_chars_in_buffer,
-	.set_termios =		if_set_termios,
-	.throttle =		if_throttle,
-	.unthrottle =		if_unthrottle,
-	.tiocmget =		if_tiocmget,
-	.tiocmset =		if_tiocmset,
-};
-
-
-/* wakeup tasklet for the write operation */
-static void if_wake(unsigned long data)
-{
-	struct cardstate *cs = (struct cardstate *)data;
-
-	tty_port_tty_wakeup(&cs->port);
-}
-
-/*** interface to common ***/
-
-void gigaset_if_init(struct cardstate *cs)
-{
-	struct gigaset_driver *drv;
-
-	drv = cs->driver;
-	if (!drv->have_tty)
-		return;
-
-	tasklet_init(&cs->if_wake_tasklet, if_wake, (unsigned long) cs);
-
-	mutex_lock(&cs->mutex);
-	cs->tty_dev = tty_port_register_device(&cs->port, drv->tty,
-			cs->minor_index, NULL);
-
-	if (!IS_ERR(cs->tty_dev))
-		dev_set_drvdata(cs->tty_dev, cs);
-	else {
-		pr_warning("could not register device to the tty subsystem\n");
-		cs->tty_dev = NULL;
-	}
-	mutex_unlock(&cs->mutex);
-}
-
-void gigaset_if_free(struct cardstate *cs)
-{
-	struct gigaset_driver *drv;
-
-	drv = cs->driver;
-	if (!drv->have_tty)
-		return;
-
-	tasklet_disable(&cs->if_wake_tasklet);
-	tasklet_kill(&cs->if_wake_tasklet);
-	cs->tty_dev = NULL;
-	tty_unregister_device(drv->tty, cs->minor_index);
-}
-
-/**
- * gigaset_if_receive() - pass a received block of data to the tty device
- * @cs:		device descriptor structure.
- * @buffer:	received data.
- * @len:	number of bytes received.
- *
- * Called by asyncdata/isocdata if a block of data received from the
- * device must be sent to userspace through the ttyG* device.
- */
-void gigaset_if_receive(struct cardstate *cs,
-			unsigned char *buffer, size_t len)
-{
-	tty_insert_flip_string(&cs->port, buffer, len);
-	tty_flip_buffer_push(&cs->port);
-}
-EXPORT_SYMBOL_GPL(gigaset_if_receive);
-
-/* gigaset_if_initdriver
- * Initialize tty interface.
- * parameters:
- *	drv		Driver
- *	procname	Name of the driver (e.g. for /proc/tty/drivers)
- *	devname		Name of the device files (prefix without minor number)
- */
-void gigaset_if_initdriver(struct gigaset_driver *drv, const char *procname,
-			   const char *devname)
-{
-	int ret;
-	struct tty_driver *tty;
-
-	drv->have_tty = 0;
-
-	drv->tty = tty = alloc_tty_driver(drv->minors);
-	if (tty == NULL)
-		goto enomem;
-
-	tty->type =		TTY_DRIVER_TYPE_SERIAL;
-	tty->subtype =		SERIAL_TYPE_NORMAL;
-	tty->flags =		TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
-
-	tty->driver_name =	procname;
-	tty->name =		devname;
-	tty->minor_start =	drv->minor;
-
-	tty->init_termios          = tty_std_termios;
-	tty->init_termios.c_cflag  = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-	tty_set_operations(tty, &if_ops);
-
-	ret = tty_register_driver(tty);
-	if (ret < 0) {
-		pr_err("error %d registering tty driver\n", ret);
-		goto error;
-	}
-	gig_dbg(DEBUG_IF, "tty driver initialized");
-	drv->have_tty = 1;
-	return;
-
-enomem:
-	pr_err("out of memory\n");
-error:
-	if (drv->tty)
-		put_tty_driver(drv->tty);
-}
-
-void gigaset_if_freedriver(struct gigaset_driver *drv)
-{
-	if (!drv->have_tty)
-		return;
-
-	drv->have_tty = 0;
-	tty_unregister_driver(drv->tty);
-	put_tty_driver(drv->tty);
-}
diff --git a/drivers/staging/isdn/gigaset/isocdata.c b/drivers/staging/isdn/gigaset/isocdata.c
deleted file mode 100644
index 3ecf6e33ed15..000000000000
--- a/drivers/staging/isdn/gigaset/isocdata.c
+++ /dev/null
@@ -1,1006 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Common data handling layer for bas_gigaset
- *
- * Copyright (c) 2005 by Tilman Schmidt <tilman@imap.cc>,
- *                       Hansjoerg Lipp <hjlipp@web.de>.
- *
- * =====================================================================
- * =====================================================================
- */
-
-#include "gigaset.h"
-#include <linux/crc-ccitt.h>
-#include <linux/bitrev.h>
-
-/* access methods for isowbuf_t */
-/* ============================ */
-
-/* initialize buffer structure
- */
-void gigaset_isowbuf_init(struct isowbuf_t *iwb, unsigned char idle)
-{
-	iwb->read = 0;
-	iwb->nextread = 0;
-	iwb->write = 0;
-	atomic_set(&iwb->writesem, 1);
-	iwb->wbits = 0;
-	iwb->idle = idle;
-	memset(iwb->data + BAS_OUTBUFSIZE, idle, BAS_OUTBUFPAD);
-}
-
-/* compute number of bytes which can be appended to buffer
- * so that there is still room to append a maximum frame of flags
- */
-static inline int isowbuf_freebytes(struct isowbuf_t *iwb)
-{
-	int read, write, freebytes;
-
-	read = iwb->read;
-	write = iwb->write;
-	freebytes = read - write;
-	if (freebytes > 0) {
-		/* no wraparound: need padding space within regular area */
-		return freebytes - BAS_OUTBUFPAD;
-	} else if (read < BAS_OUTBUFPAD) {
-		/* wraparound: can use space up to end of regular area */
-		return BAS_OUTBUFSIZE - write;
-	} else {
-		/* following the wraparound yields more space */
-		return freebytes + BAS_OUTBUFSIZE - BAS_OUTBUFPAD;
-	}
-}
-
-/* start writing
- * acquire the write semaphore
- * return 0 if acquired, <0 if busy
- */
-static inline int isowbuf_startwrite(struct isowbuf_t *iwb)
-{
-	if (!atomic_dec_and_test(&iwb->writesem)) {
-		atomic_inc(&iwb->writesem);
-		gig_dbg(DEBUG_ISO, "%s: couldn't acquire iso write semaphore",
-			__func__);
-		return -EBUSY;
-	}
-	gig_dbg(DEBUG_ISO,
-		"%s: acquired iso write semaphore, data[write]=%02x, nbits=%d",
-		__func__, iwb->data[iwb->write], iwb->wbits);
-	return 0;
-}
-
-/* finish writing
- * release the write semaphore
- * returns the current write position
- */
-static inline int isowbuf_donewrite(struct isowbuf_t *iwb)
-{
-	int write = iwb->write;
-	atomic_inc(&iwb->writesem);
-	return write;
-}
-
-/* append bits to buffer without any checks
- * - data contains bits to append, starting at LSB
- * - nbits is number of bits to append (0..24)
- * must be called with the write semaphore held
- * If more than nbits bits are set in data, the extraneous bits are set in the
- * buffer too, but the write position is only advanced by nbits.
- */
-static inline void isowbuf_putbits(struct isowbuf_t *iwb, u32 data, int nbits)
-{
-	int write = iwb->write;
-	data <<= iwb->wbits;
-	data |= iwb->data[write];
-	nbits += iwb->wbits;
-	while (nbits >= 8) {
-		iwb->data[write++] = data & 0xff;
-		write %= BAS_OUTBUFSIZE;
-		data >>= 8;
-		nbits -= 8;
-	}
-	iwb->wbits = nbits;
-	iwb->data[write] = data & 0xff;
-	iwb->write = write;
-}
-
-/* put final flag on HDLC bitstream
- * also sets the idle fill byte to the correspondingly shifted flag pattern
- * must be called with the write semaphore held
- */
-static inline void isowbuf_putflag(struct isowbuf_t *iwb)
-{
-	int write;
-
-	/* add two flags, thus reliably covering one byte */
-	isowbuf_putbits(iwb, 0x7e7e, 8);
-	/* recover the idle flag byte */
-	write = iwb->write;
-	iwb->idle = iwb->data[write];
-	gig_dbg(DEBUG_ISO, "idle fill byte %02x", iwb->idle);
-	/* mask extraneous bits in buffer */
-	iwb->data[write] &= (1 << iwb->wbits) - 1;
-}
-
-/* retrieve a block of bytes for sending
- * The requested number of bytes is provided as a contiguous block.
- * If necessary, the frame is filled to the requested number of bytes
- * with the idle value.
- * returns offset to frame, < 0 on busy or error
- */
-int gigaset_isowbuf_getbytes(struct isowbuf_t *iwb, int size)
-{
-	int read, write, limit, src, dst;
-	unsigned char pbyte;
-
-	read = iwb->nextread;
-	write = iwb->write;
-	if (likely(read == write)) {
-		/* return idle frame */
-		return read < BAS_OUTBUFPAD ?
-			BAS_OUTBUFSIZE : read - BAS_OUTBUFPAD;
-	}
-
-	limit = read + size;
-	gig_dbg(DEBUG_STREAM, "%s: read=%d write=%d limit=%d",
-		__func__, read, write, limit);
-#ifdef CONFIG_GIGASET_DEBUG
-	if (unlikely(size < 0 || size > BAS_OUTBUFPAD)) {
-		pr_err("invalid size %d\n", size);
-		return -EINVAL;
-	}
-#endif
-
-	if (read < write) {
-		/* no wraparound in valid data */
-		if (limit >= write) {
-			/* append idle frame */
-			if (isowbuf_startwrite(iwb) < 0)
-				return -EBUSY;
-			/* write position could have changed */
-			write = iwb->write;
-			if (limit >= write) {
-				pbyte = iwb->data[write]; /* save
-							     partial byte */
-				limit = write + BAS_OUTBUFPAD;
-				gig_dbg(DEBUG_STREAM,
-					"%s: filling %d->%d with %02x",
-					__func__, write, limit, iwb->idle);
-				if (write + BAS_OUTBUFPAD < BAS_OUTBUFSIZE)
-					memset(iwb->data + write, iwb->idle,
-					       BAS_OUTBUFPAD);
-				else {
-					/* wraparound, fill entire pad area */
-					memset(iwb->data + write, iwb->idle,
-					       BAS_OUTBUFSIZE + BAS_OUTBUFPAD
-					       - write);
-					limit = 0;
-				}
-				gig_dbg(DEBUG_STREAM,
-					"%s: restoring %02x at %d",
-					__func__, pbyte, limit);
-				iwb->data[limit] = pbyte; /* restore
-							     partial byte */
-				iwb->write = limit;
-			}
-			isowbuf_donewrite(iwb);
-		}
-	} else {
-		/* valid data wraparound */
-		if (limit >= BAS_OUTBUFSIZE) {
-			/* copy wrapped part into pad area */
-			src = 0;
-			dst = BAS_OUTBUFSIZE;
-			while (dst < limit && src < write)
-				iwb->data[dst++] = iwb->data[src++];
-			if (dst <= limit) {
-				/* fill pad area with idle byte */
-				memset(iwb->data + dst, iwb->idle,
-				       BAS_OUTBUFSIZE + BAS_OUTBUFPAD - dst);
-			}
-			limit = src;
-		}
-	}
-	iwb->nextread = limit;
-	return read;
-}
-
-/* dump_bytes
- * write hex bytes to syslog for debugging
- */
-static inline void dump_bytes(enum debuglevel level, const char *tag,
-			      unsigned char *bytes, int count)
-{
-#ifdef CONFIG_GIGASET_DEBUG
-	unsigned char c;
-	static char dbgline[3 * 32 + 1];
-	int i = 0;
-
-	if (!(gigaset_debuglevel & level))
-		return;
-
-	while (count-- > 0) {
-		if (i > sizeof(dbgline) - 4) {
-			dbgline[i] = '\0';
-			gig_dbg(level, "%s:%s", tag, dbgline);
-			i = 0;
-		}
-		c = *bytes++;
-		dbgline[i] = (i && !(i % 12)) ? '-' : ' ';
-		i++;
-		dbgline[i++] = hex_asc_hi(c);
-		dbgline[i++] = hex_asc_lo(c);
-	}
-	dbgline[i] = '\0';
-	gig_dbg(level, "%s:%s", tag, dbgline);
-#endif
-}
-
-/*============================================================================*/
-
-/* bytewise HDLC bitstuffing via table lookup
- * lookup table: 5 subtables for 0..4 preceding consecutive '1' bits
- * index: 256*(number of preceding '1' bits) + (next byte to stuff)
- * value: bit  9.. 0 = result bits
- *        bit 12..10 = number of trailing '1' bits in result
- *        bit 14..13 = number of bits added by stuffing
- */
-static const u16 stufftab[5 * 256] = {
-/* previous 1s = 0: */
-	0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x0007, 0x0008, 0x0009, 0x000a, 0x000b, 0x000c, 0x000d, 0x000e, 0x000f,
-	0x0010, 0x0011, 0x0012, 0x0013, 0x0014, 0x0015, 0x0016, 0x0017, 0x0018, 0x0019, 0x001a, 0x001b, 0x001c, 0x001d, 0x001e, 0x201f,
-	0x0020, 0x0021, 0x0022, 0x0023, 0x0024, 0x0025, 0x0026, 0x0027, 0x0028, 0x0029, 0x002a, 0x002b, 0x002c, 0x002d, 0x002e, 0x002f,
-	0x0030, 0x0031, 0x0032, 0x0033, 0x0034, 0x0035, 0x0036, 0x0037, 0x0038, 0x0039, 0x003a, 0x003b, 0x003c, 0x003d, 0x203e, 0x205f,
-	0x0040, 0x0041, 0x0042, 0x0043, 0x0044, 0x0045, 0x0046, 0x0047, 0x0048, 0x0049, 0x004a, 0x004b, 0x004c, 0x004d, 0x004e, 0x004f,
-	0x0050, 0x0051, 0x0052, 0x0053, 0x0054, 0x0055, 0x0056, 0x0057, 0x0058, 0x0059, 0x005a, 0x005b, 0x005c, 0x005d, 0x005e, 0x209f,
-	0x0060, 0x0061, 0x0062, 0x0063, 0x0064, 0x0065, 0x0066, 0x0067, 0x0068, 0x0069, 0x006a, 0x006b, 0x006c, 0x006d, 0x006e, 0x006f,
-	0x0070, 0x0071, 0x0072, 0x0073, 0x0074, 0x0075, 0x0076, 0x0077, 0x0078, 0x0079, 0x007a, 0x007b, 0x207c, 0x207d, 0x20be, 0x20df,
-	0x0480, 0x0481, 0x0482, 0x0483, 0x0484, 0x0485, 0x0486, 0x0487, 0x0488, 0x0489, 0x048a, 0x048b, 0x048c, 0x048d, 0x048e, 0x048f,
-	0x0490, 0x0491, 0x0492, 0x0493, 0x0494, 0x0495, 0x0496, 0x0497, 0x0498, 0x0499, 0x049a, 0x049b, 0x049c, 0x049d, 0x049e, 0x251f,
-	0x04a0, 0x04a1, 0x04a2, 0x04a3, 0x04a4, 0x04a5, 0x04a6, 0x04a7, 0x04a8, 0x04a9, 0x04aa, 0x04ab, 0x04ac, 0x04ad, 0x04ae, 0x04af,
-	0x04b0, 0x04b1, 0x04b2, 0x04b3, 0x04b4, 0x04b5, 0x04b6, 0x04b7, 0x04b8, 0x04b9, 0x04ba, 0x04bb, 0x04bc, 0x04bd, 0x253e, 0x255f,
-	0x08c0, 0x08c1, 0x08c2, 0x08c3, 0x08c4, 0x08c5, 0x08c6, 0x08c7, 0x08c8, 0x08c9, 0x08ca, 0x08cb, 0x08cc, 0x08cd, 0x08ce, 0x08cf,
-	0x08d0, 0x08d1, 0x08d2, 0x08d3, 0x08d4, 0x08d5, 0x08d6, 0x08d7, 0x08d8, 0x08d9, 0x08da, 0x08db, 0x08dc, 0x08dd, 0x08de, 0x299f,
-	0x0ce0, 0x0ce1, 0x0ce2, 0x0ce3, 0x0ce4, 0x0ce5, 0x0ce6, 0x0ce7, 0x0ce8, 0x0ce9, 0x0cea, 0x0ceb, 0x0cec, 0x0ced, 0x0cee, 0x0cef,
-	0x10f0, 0x10f1, 0x10f2, 0x10f3, 0x10f4, 0x10f5, 0x10f6, 0x10f7, 0x20f8, 0x20f9, 0x20fa, 0x20fb, 0x257c, 0x257d, 0x29be, 0x2ddf,
-
-/* previous 1s = 1: */
-	0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x0007, 0x0008, 0x0009, 0x000a, 0x000b, 0x000c, 0x000d, 0x000e, 0x200f,
-	0x0010, 0x0011, 0x0012, 0x0013, 0x0014, 0x0015, 0x0016, 0x0017, 0x0018, 0x0019, 0x001a, 0x001b, 0x001c, 0x001d, 0x001e, 0x202f,
-	0x0020, 0x0021, 0x0022, 0x0023, 0x0024, 0x0025, 0x0026, 0x0027, 0x0028, 0x0029, 0x002a, 0x002b, 0x002c, 0x002d, 0x002e, 0x204f,
-	0x0030, 0x0031, 0x0032, 0x0033, 0x0034, 0x0035, 0x0036, 0x0037, 0x0038, 0x0039, 0x003a, 0x003b, 0x003c, 0x003d, 0x203e, 0x206f,
-	0x0040, 0x0041, 0x0042, 0x0043, 0x0044, 0x0045, 0x0046, 0x0047, 0x0048, 0x0049, 0x004a, 0x004b, 0x004c, 0x004d, 0x004e, 0x208f,
-	0x0050, 0x0051, 0x0052, 0x0053, 0x0054, 0x0055, 0x0056, 0x0057, 0x0058, 0x0059, 0x005a, 0x005b, 0x005c, 0x005d, 0x005e, 0x20af,
-	0x0060, 0x0061, 0x0062, 0x0063, 0x0064, 0x0065, 0x0066, 0x0067, 0x0068, 0x0069, 0x006a, 0x006b, 0x006c, 0x006d, 0x006e, 0x20cf,
-	0x0070, 0x0071, 0x0072, 0x0073, 0x0074, 0x0075, 0x0076, 0x0077, 0x0078, 0x0079, 0x007a, 0x007b, 0x207c, 0x207d, 0x20be, 0x20ef,
-	0x0480, 0x0481, 0x0482, 0x0483, 0x0484, 0x0485, 0x0486, 0x0487, 0x0488, 0x0489, 0x048a, 0x048b, 0x048c, 0x048d, 0x048e, 0x250f,
-	0x0490, 0x0491, 0x0492, 0x0493, 0x0494, 0x0495, 0x0496, 0x0497, 0x0498, 0x0499, 0x049a, 0x049b, 0x049c, 0x049d, 0x049e, 0x252f,
-	0x04a0, 0x04a1, 0x04a2, 0x04a3, 0x04a4, 0x04a5, 0x04a6, 0x04a7, 0x04a8, 0x04a9, 0x04aa, 0x04ab, 0x04ac, 0x04ad, 0x04ae, 0x254f,
-	0x04b0, 0x04b1, 0x04b2, 0x04b3, 0x04b4, 0x04b5, 0x04b6, 0x04b7, 0x04b8, 0x04b9, 0x04ba, 0x04bb, 0x04bc, 0x04bd, 0x253e, 0x256f,
-	0x08c0, 0x08c1, 0x08c2, 0x08c3, 0x08c4, 0x08c5, 0x08c6, 0x08c7, 0x08c8, 0x08c9, 0x08ca, 0x08cb, 0x08cc, 0x08cd, 0x08ce, 0x298f,
-	0x08d0, 0x08d1, 0x08d2, 0x08d3, 0x08d4, 0x08d5, 0x08d6, 0x08d7, 0x08d8, 0x08d9, 0x08da, 0x08db, 0x08dc, 0x08dd, 0x08de, 0x29af,
-	0x0ce0, 0x0ce1, 0x0ce2, 0x0ce3, 0x0ce4, 0x0ce5, 0x0ce6, 0x0ce7, 0x0ce8, 0x0ce9, 0x0cea, 0x0ceb, 0x0cec, 0x0ced, 0x0cee, 0x2dcf,
-	0x10f0, 0x10f1, 0x10f2, 0x10f3, 0x10f4, 0x10f5, 0x10f6, 0x10f7, 0x20f8, 0x20f9, 0x20fa, 0x20fb, 0x257c, 0x257d, 0x29be, 0x31ef,
-
-/* previous 1s = 2: */
-	0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x2007, 0x0008, 0x0009, 0x000a, 0x000b, 0x000c, 0x000d, 0x000e, 0x2017,
-	0x0010, 0x0011, 0x0012, 0x0013, 0x0014, 0x0015, 0x0016, 0x2027, 0x0018, 0x0019, 0x001a, 0x001b, 0x001c, 0x001d, 0x001e, 0x2037,
-	0x0020, 0x0021, 0x0022, 0x0023, 0x0024, 0x0025, 0x0026, 0x2047, 0x0028, 0x0029, 0x002a, 0x002b, 0x002c, 0x002d, 0x002e, 0x2057,
-	0x0030, 0x0031, 0x0032, 0x0033, 0x0034, 0x0035, 0x0036, 0x2067, 0x0038, 0x0039, 0x003a, 0x003b, 0x003c, 0x003d, 0x203e, 0x2077,
-	0x0040, 0x0041, 0x0042, 0x0043, 0x0044, 0x0045, 0x0046, 0x2087, 0x0048, 0x0049, 0x004a, 0x004b, 0x004c, 0x004d, 0x004e, 0x2097,
-	0x0050, 0x0051, 0x0052, 0x0053, 0x0054, 0x0055, 0x0056, 0x20a7, 0x0058, 0x0059, 0x005a, 0x005b, 0x005c, 0x005d, 0x005e, 0x20b7,
-	0x0060, 0x0061, 0x0062, 0x0063, 0x0064, 0x0065, 0x0066, 0x20c7, 0x0068, 0x0069, 0x006a, 0x006b, 0x006c, 0x006d, 0x006e, 0x20d7,
-	0x0070, 0x0071, 0x0072, 0x0073, 0x0074, 0x0075, 0x0076, 0x20e7, 0x0078, 0x0079, 0x007a, 0x007b, 0x207c, 0x207d, 0x20be, 0x20f7,
-	0x0480, 0x0481, 0x0482, 0x0483, 0x0484, 0x0485, 0x0486, 0x2507, 0x0488, 0x0489, 0x048a, 0x048b, 0x048c, 0x048d, 0x048e, 0x2517,
-	0x0490, 0x0491, 0x0492, 0x0493, 0x0494, 0x0495, 0x0496, 0x2527, 0x0498, 0x0499, 0x049a, 0x049b, 0x049c, 0x049d, 0x049e, 0x2537,
-	0x04a0, 0x04a1, 0x04a2, 0x04a3, 0x04a4, 0x04a5, 0x04a6, 0x2547, 0x04a8, 0x04a9, 0x04aa, 0x04ab, 0x04ac, 0x04ad, 0x04ae, 0x2557,
-	0x04b0, 0x04b1, 0x04b2, 0x04b3, 0x04b4, 0x04b5, 0x04b6, 0x2567, 0x04b8, 0x04b9, 0x04ba, 0x04bb, 0x04bc, 0x04bd, 0x253e, 0x2577,
-	0x08c0, 0x08c1, 0x08c2, 0x08c3, 0x08c4, 0x08c5, 0x08c6, 0x2987, 0x08c8, 0x08c9, 0x08ca, 0x08cb, 0x08cc, 0x08cd, 0x08ce, 0x2997,
-	0x08d0, 0x08d1, 0x08d2, 0x08d3, 0x08d4, 0x08d5, 0x08d6, 0x29a7, 0x08d8, 0x08d9, 0x08da, 0x08db, 0x08dc, 0x08dd, 0x08de, 0x29b7,
-	0x0ce0, 0x0ce1, 0x0ce2, 0x0ce3, 0x0ce4, 0x0ce5, 0x0ce6, 0x2dc7, 0x0ce8, 0x0ce9, 0x0cea, 0x0ceb, 0x0cec, 0x0ced, 0x0cee, 0x2dd7,
-	0x10f0, 0x10f1, 0x10f2, 0x10f3, 0x10f4, 0x10f5, 0x10f6, 0x31e7, 0x20f8, 0x20f9, 0x20fa, 0x20fb, 0x257c, 0x257d, 0x29be, 0x41f7,
-
-/* previous 1s = 3: */
-	0x0000, 0x0001, 0x0002, 0x2003, 0x0004, 0x0005, 0x0006, 0x200b, 0x0008, 0x0009, 0x000a, 0x2013, 0x000c, 0x000d, 0x000e, 0x201b,
-	0x0010, 0x0011, 0x0012, 0x2023, 0x0014, 0x0015, 0x0016, 0x202b, 0x0018, 0x0019, 0x001a, 0x2033, 0x001c, 0x001d, 0x001e, 0x203b,
-	0x0020, 0x0021, 0x0022, 0x2043, 0x0024, 0x0025, 0x0026, 0x204b, 0x0028, 0x0029, 0x002a, 0x2053, 0x002c, 0x002d, 0x002e, 0x205b,
-	0x0030, 0x0031, 0x0032, 0x2063, 0x0034, 0x0035, 0x0036, 0x206b, 0x0038, 0x0039, 0x003a, 0x2073, 0x003c, 0x003d, 0x203e, 0x207b,
-	0x0040, 0x0041, 0x0042, 0x2083, 0x0044, 0x0045, 0x0046, 0x208b, 0x0048, 0x0049, 0x004a, 0x2093, 0x004c, 0x004d, 0x004e, 0x209b,
-	0x0050, 0x0051, 0x0052, 0x20a3, 0x0054, 0x0055, 0x0056, 0x20ab, 0x0058, 0x0059, 0x005a, 0x20b3, 0x005c, 0x005d, 0x005e, 0x20bb,
-	0x0060, 0x0061, 0x0062, 0x20c3, 0x0064, 0x0065, 0x0066, 0x20cb, 0x0068, 0x0069, 0x006a, 0x20d3, 0x006c, 0x006d, 0x006e, 0x20db,
-	0x0070, 0x0071, 0x0072, 0x20e3, 0x0074, 0x0075, 0x0076, 0x20eb, 0x0078, 0x0079, 0x007a, 0x20f3, 0x207c, 0x207d, 0x20be, 0x40fb,
-	0x0480, 0x0481, 0x0482, 0x2503, 0x0484, 0x0485, 0x0486, 0x250b, 0x0488, 0x0489, 0x048a, 0x2513, 0x048c, 0x048d, 0x048e, 0x251b,
-	0x0490, 0x0491, 0x0492, 0x2523, 0x0494, 0x0495, 0x0496, 0x252b, 0x0498, 0x0499, 0x049a, 0x2533, 0x049c, 0x049d, 0x049e, 0x253b,
-	0x04a0, 0x04a1, 0x04a2, 0x2543, 0x04a4, 0x04a5, 0x04a6, 0x254b, 0x04a8, 0x04a9, 0x04aa, 0x2553, 0x04ac, 0x04ad, 0x04ae, 0x255b,
-	0x04b0, 0x04b1, 0x04b2, 0x2563, 0x04b4, 0x04b5, 0x04b6, 0x256b, 0x04b8, 0x04b9, 0x04ba, 0x2573, 0x04bc, 0x04bd, 0x253e, 0x257b,
-	0x08c0, 0x08c1, 0x08c2, 0x2983, 0x08c4, 0x08c5, 0x08c6, 0x298b, 0x08c8, 0x08c9, 0x08ca, 0x2993, 0x08cc, 0x08cd, 0x08ce, 0x299b,
-	0x08d0, 0x08d1, 0x08d2, 0x29a3, 0x08d4, 0x08d5, 0x08d6, 0x29ab, 0x08d8, 0x08d9, 0x08da, 0x29b3, 0x08dc, 0x08dd, 0x08de, 0x29bb,
-	0x0ce0, 0x0ce1, 0x0ce2, 0x2dc3, 0x0ce4, 0x0ce5, 0x0ce6, 0x2dcb, 0x0ce8, 0x0ce9, 0x0cea, 0x2dd3, 0x0cec, 0x0ced, 0x0cee, 0x2ddb,
-	0x10f0, 0x10f1, 0x10f2, 0x31e3, 0x10f4, 0x10f5, 0x10f6, 0x31eb, 0x20f8, 0x20f9, 0x20fa, 0x41f3, 0x257c, 0x257d, 0x29be, 0x46fb,
-
-/* previous 1s = 4: */
-	0x0000, 0x2001, 0x0002, 0x2005, 0x0004, 0x2009, 0x0006, 0x200d, 0x0008, 0x2011, 0x000a, 0x2015, 0x000c, 0x2019, 0x000e, 0x201d,
-	0x0010, 0x2021, 0x0012, 0x2025, 0x0014, 0x2029, 0x0016, 0x202d, 0x0018, 0x2031, 0x001a, 0x2035, 0x001c, 0x2039, 0x001e, 0x203d,
-	0x0020, 0x2041, 0x0022, 0x2045, 0x0024, 0x2049, 0x0026, 0x204d, 0x0028, 0x2051, 0x002a, 0x2055, 0x002c, 0x2059, 0x002e, 0x205d,
-	0x0030, 0x2061, 0x0032, 0x2065, 0x0034, 0x2069, 0x0036, 0x206d, 0x0038, 0x2071, 0x003a, 0x2075, 0x003c, 0x2079, 0x203e, 0x407d,
-	0x0040, 0x2081, 0x0042, 0x2085, 0x0044, 0x2089, 0x0046, 0x208d, 0x0048, 0x2091, 0x004a, 0x2095, 0x004c, 0x2099, 0x004e, 0x209d,
-	0x0050, 0x20a1, 0x0052, 0x20a5, 0x0054, 0x20a9, 0x0056, 0x20ad, 0x0058, 0x20b1, 0x005a, 0x20b5, 0x005c, 0x20b9, 0x005e, 0x20bd,
-	0x0060, 0x20c1, 0x0062, 0x20c5, 0x0064, 0x20c9, 0x0066, 0x20cd, 0x0068, 0x20d1, 0x006a, 0x20d5, 0x006c, 0x20d9, 0x006e, 0x20dd,
-	0x0070, 0x20e1, 0x0072, 0x20e5, 0x0074, 0x20e9, 0x0076, 0x20ed, 0x0078, 0x20f1, 0x007a, 0x20f5, 0x207c, 0x40f9, 0x20be, 0x417d,
-	0x0480, 0x2501, 0x0482, 0x2505, 0x0484, 0x2509, 0x0486, 0x250d, 0x0488, 0x2511, 0x048a, 0x2515, 0x048c, 0x2519, 0x048e, 0x251d,
-	0x0490, 0x2521, 0x0492, 0x2525, 0x0494, 0x2529, 0x0496, 0x252d, 0x0498, 0x2531, 0x049a, 0x2535, 0x049c, 0x2539, 0x049e, 0x253d,
-	0x04a0, 0x2541, 0x04a2, 0x2545, 0x04a4, 0x2549, 0x04a6, 0x254d, 0x04a8, 0x2551, 0x04aa, 0x2555, 0x04ac, 0x2559, 0x04ae, 0x255d,
-	0x04b0, 0x2561, 0x04b2, 0x2565, 0x04b4, 0x2569, 0x04b6, 0x256d, 0x04b8, 0x2571, 0x04ba, 0x2575, 0x04bc, 0x2579, 0x253e, 0x467d,
-	0x08c0, 0x2981, 0x08c2, 0x2985, 0x08c4, 0x2989, 0x08c6, 0x298d, 0x08c8, 0x2991, 0x08ca, 0x2995, 0x08cc, 0x2999, 0x08ce, 0x299d,
-	0x08d0, 0x29a1, 0x08d2, 0x29a5, 0x08d4, 0x29a9, 0x08d6, 0x29ad, 0x08d8, 0x29b1, 0x08da, 0x29b5, 0x08dc, 0x29b9, 0x08de, 0x29bd,
-	0x0ce0, 0x2dc1, 0x0ce2, 0x2dc5, 0x0ce4, 0x2dc9, 0x0ce6, 0x2dcd, 0x0ce8, 0x2dd1, 0x0cea, 0x2dd5, 0x0cec, 0x2dd9, 0x0cee, 0x2ddd,
-	0x10f0, 0x31e1, 0x10f2, 0x31e5, 0x10f4, 0x31e9, 0x10f6, 0x31ed, 0x20f8, 0x41f1, 0x20fa, 0x41f5, 0x257c, 0x46f9, 0x29be, 0x4b7d
-};
-
-/* hdlc_bitstuff_byte
- * perform HDLC bitstuffing for one input byte (8 bits, LSB first)
- * parameters:
- *	cin	input byte
- *	ones	number of trailing '1' bits in result before this step
- *	iwb	pointer to output buffer structure
- *		(write semaphore must be held)
- * return value:
- *	number of trailing '1' bits in result after this step
- */
-
-static inline int hdlc_bitstuff_byte(struct isowbuf_t *iwb, unsigned char cin,
-				     int ones)
-{
-	u16 stuff;
-	int shiftinc, newones;
-
-	/* get stuffing information for input byte
-	 * value: bit  9.. 0 = result bits
-	 *        bit 12..10 = number of trailing '1' bits in result
-	 *        bit 14..13 = number of bits added by stuffing
-	 */
-	stuff = stufftab[256 * ones + cin];
-	shiftinc = (stuff >> 13) & 3;
-	newones = (stuff >> 10) & 7;
-	stuff &= 0x3ff;
-
-	/* append stuffed byte to output stream */
-	isowbuf_putbits(iwb, stuff, 8 + shiftinc);
-	return newones;
-}
-
-/* hdlc_buildframe
- * Perform HDLC framing with bitstuffing on a byte buffer
- * The input buffer is regarded as a sequence of bits, starting with the least
- * significant bit of the first byte and ending with the most significant bit
- * of the last byte. A 16 bit FCS is appended as defined by RFC 1662.
- * Whenever five consecutive '1' bits appear in the resulting bit sequence, a
- * '0' bit is inserted after them.
- * The resulting bit string and a closing flag pattern (PPP_FLAG, '01111110')
- * are appended to the output buffer starting at the given bit position, which
- * is assumed to already contain a leading flag.
- * The output buffer must have sufficient length; count + count/5 + 6 bytes
- * starting at *out are safe and are verified to be present.
- * parameters:
- *	in	input buffer
- *	count	number of bytes in input buffer
- *	iwb	pointer to output buffer structure
- *		(write semaphore must be held)
- * return value:
- *	position of end of packet in output buffer on success,
- *	-EAGAIN if write semaphore busy or buffer full
- */
-
-static inline int hdlc_buildframe(struct isowbuf_t *iwb,
-				  unsigned char *in, int count)
-{
-	int ones;
-	u16 fcs;
-	int end;
-	unsigned char c;
-
-	if (isowbuf_freebytes(iwb) < count + count / 5 + 6 ||
-	    isowbuf_startwrite(iwb) < 0) {
-		gig_dbg(DEBUG_ISO, "%s: %d bytes free -> -EAGAIN",
-			__func__, isowbuf_freebytes(iwb));
-		return -EAGAIN;
-	}
-
-	dump_bytes(DEBUG_STREAM_DUMP, "snd data", in, count);
-
-	/* bitstuff and checksum input data */
-	fcs = PPP_INITFCS;
-	ones = 0;
-	while (count-- > 0) {
-		c = *in++;
-		ones = hdlc_bitstuff_byte(iwb, c, ones);
-		fcs = crc_ccitt_byte(fcs, c);
-	}
-
-	/* bitstuff and append FCS
-	 * (complemented, least significant byte first) */
-	fcs ^= 0xffff;
-	ones = hdlc_bitstuff_byte(iwb, fcs & 0x00ff, ones);
-	ones = hdlc_bitstuff_byte(iwb, (fcs >> 8) & 0x00ff, ones);
-
-	/* put closing flag and repeat byte for flag idle */
-	isowbuf_putflag(iwb);
-	end = isowbuf_donewrite(iwb);
-	return end;
-}
-
-/* trans_buildframe
- * Append a block of 'transparent' data to the output buffer,
- * inverting the bytes.
- * The output buffer must have sufficient length; count bytes
- * starting at *out are safe and are verified to be present.
- * parameters:
- *	in	input buffer
- *	count	number of bytes in input buffer
- *	iwb	pointer to output buffer structure
- *		(write semaphore must be held)
- * return value:
- *	position of end of packet in output buffer on success,
- *	-EAGAIN if write semaphore busy or buffer full
- */
-
-static inline int trans_buildframe(struct isowbuf_t *iwb,
-				   unsigned char *in, int count)
-{
-	int write;
-	unsigned char c;
-
-	if (unlikely(count <= 0))
-		return iwb->write;
-
-	if (isowbuf_freebytes(iwb) < count ||
-	    isowbuf_startwrite(iwb) < 0) {
-		gig_dbg(DEBUG_ISO, "can't put %d bytes", count);
-		return -EAGAIN;
-	}
-
-	gig_dbg(DEBUG_STREAM, "put %d bytes", count);
-	dump_bytes(DEBUG_STREAM_DUMP, "snd data", in, count);
-
-	write = iwb->write;
-	do {
-		c = bitrev8(*in++);
-		iwb->data[write++] = c;
-		write %= BAS_OUTBUFSIZE;
-	} while (--count > 0);
-	iwb->write = write;
-	iwb->idle = c;
-
-	return isowbuf_donewrite(iwb);
-}
-
-int gigaset_isoc_buildframe(struct bc_state *bcs, unsigned char *in, int len)
-{
-	int result;
-
-	switch (bcs->proto2) {
-	case L2_HDLC:
-		result = hdlc_buildframe(bcs->hw.bas->isooutbuf, in, len);
-		gig_dbg(DEBUG_ISO, "%s: %d bytes HDLC -> %d",
-			__func__, len, result);
-		break;
-	default:			/* assume transparent */
-		result = trans_buildframe(bcs->hw.bas->isooutbuf, in, len);
-		gig_dbg(DEBUG_ISO, "%s: %d bytes trans -> %d",
-			__func__, len, result);
-	}
-	return result;
-}
-
-/* hdlc_putbyte
- * append byte c to current skb of B channel structure *bcs, updating fcs
- */
-static inline void hdlc_putbyte(unsigned char c, struct bc_state *bcs)
-{
-	bcs->rx_fcs = crc_ccitt_byte(bcs->rx_fcs, c);
-	if (bcs->rx_skb == NULL)
-		/* skipping */
-		return;
-	if (bcs->rx_skb->len >= bcs->rx_bufsize) {
-		dev_warn(bcs->cs->dev, "received oversized packet discarded\n");
-		bcs->hw.bas->giants++;
-		dev_kfree_skb_any(bcs->rx_skb);
-		bcs->rx_skb = NULL;
-		return;
-	}
-	__skb_put_u8(bcs->rx_skb, c);
-}
-
-/* hdlc_flush
- * drop partial HDLC data packet
- */
-static inline void hdlc_flush(struct bc_state *bcs)
-{
-	/* clear skb or allocate new if not skipping */
-	if (bcs->rx_skb != NULL)
-		skb_trim(bcs->rx_skb, 0);
-	else
-		gigaset_new_rx_skb(bcs);
-
-	/* reset packet state */
-	bcs->rx_fcs = PPP_INITFCS;
-}
-
-/* hdlc_done
- * process completed HDLC data packet
- */
-static inline void hdlc_done(struct bc_state *bcs)
-{
-	struct cardstate *cs = bcs->cs;
-	struct sk_buff *procskb;
-	unsigned int len;
-
-	if (unlikely(bcs->ignore)) {
-		bcs->ignore--;
-		hdlc_flush(bcs);
-		return;
-	}
-	procskb = bcs->rx_skb;
-	if (procskb == NULL) {
-		/* previous error */
-		gig_dbg(DEBUG_ISO, "%s: skb=NULL", __func__);
-		gigaset_isdn_rcv_err(bcs);
-	} else if (procskb->len < 2) {
-		dev_notice(cs->dev, "received short frame (%d octets)\n",
-			   procskb->len);
-		bcs->hw.bas->runts++;
-		dev_kfree_skb_any(procskb);
-		gigaset_isdn_rcv_err(bcs);
-	} else if (bcs->rx_fcs != PPP_GOODFCS) {
-		dev_notice(cs->dev, "frame check error\n");
-		bcs->hw.bas->fcserrs++;
-		dev_kfree_skb_any(procskb);
-		gigaset_isdn_rcv_err(bcs);
-	} else {
-		len = procskb->len;
-		__skb_trim(procskb, len -= 2);	/* subtract FCS */
-		gig_dbg(DEBUG_ISO, "%s: good frame (%d octets)", __func__, len);
-		dump_bytes(DEBUG_STREAM_DUMP,
-			   "rcv data", procskb->data, len);
-		bcs->hw.bas->goodbytes += len;
-		gigaset_skb_rcvd(bcs, procskb);
-	}
-	gigaset_new_rx_skb(bcs);
-	bcs->rx_fcs = PPP_INITFCS;
-}
-
-/* hdlc_frag
- * drop HDLC data packet with non-integral last byte
- */
-static inline void hdlc_frag(struct bc_state *bcs, unsigned inbits)
-{
-	if (unlikely(bcs->ignore)) {
-		bcs->ignore--;
-		hdlc_flush(bcs);
-		return;
-	}
-
-	dev_notice(bcs->cs->dev, "received partial byte (%d bits)\n", inbits);
-	bcs->hw.bas->alignerrs++;
-	gigaset_isdn_rcv_err(bcs);
-	__skb_trim(bcs->rx_skb, 0);
-	bcs->rx_fcs = PPP_INITFCS;
-}
-
-/* bit counts lookup table for HDLC bit unstuffing
- * index: input byte
- * value: bit 0..3 = number of consecutive '1' bits starting from LSB
- *        bit 4..6 = number of consecutive '1' bits starting from MSB
- *		     (replacing 8 by 7 to make it fit; the algorithm won't care)
- *        bit 7 set if there are 5 or more "interior" consecutive '1' bits
- */
-static const unsigned char bitcounts[256] = {
-	0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00, 0x03, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00, 0x04,
-	0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00, 0x03, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00, 0x05,
-	0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00, 0x03, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00, 0x04,
-	0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00, 0x03, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x80, 0x06,
-	0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00, 0x03, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00, 0x04,
-	0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00, 0x03, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00, 0x05,
-	0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00, 0x03, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00, 0x04,
-	0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00, 0x03, 0x00, 0x01, 0x00, 0x02, 0x80, 0x81, 0x80, 0x07,
-	0x10, 0x11, 0x10, 0x12, 0x10, 0x11, 0x10, 0x13, 0x10, 0x11, 0x10, 0x12, 0x10, 0x11, 0x10, 0x14,
-	0x10, 0x11, 0x10, 0x12, 0x10, 0x11, 0x10, 0x13, 0x10, 0x11, 0x10, 0x12, 0x10, 0x11, 0x10, 0x15,
-	0x10, 0x11, 0x10, 0x12, 0x10, 0x11, 0x10, 0x13, 0x10, 0x11, 0x10, 0x12, 0x10, 0x11, 0x10, 0x14,
-	0x10, 0x11, 0x10, 0x12, 0x10, 0x11, 0x10, 0x13, 0x10, 0x11, 0x10, 0x12, 0x10, 0x11, 0x90, 0x16,
-	0x20, 0x21, 0x20, 0x22, 0x20, 0x21, 0x20, 0x23, 0x20, 0x21, 0x20, 0x22, 0x20, 0x21, 0x20, 0x24,
-	0x20, 0x21, 0x20, 0x22, 0x20, 0x21, 0x20, 0x23, 0x20, 0x21, 0x20, 0x22, 0x20, 0x21, 0x20, 0x25,
-	0x30, 0x31, 0x30, 0x32, 0x30, 0x31, 0x30, 0x33, 0x30, 0x31, 0x30, 0x32, 0x30, 0x31, 0x30, 0x34,
-	0x40, 0x41, 0x40, 0x42, 0x40, 0x41, 0x40, 0x43, 0x50, 0x51, 0x50, 0x52, 0x60, 0x61, 0x70, 0x78
-};
-
-/* hdlc_unpack
- * perform HDLC frame processing (bit unstuffing, flag detection, FCS
- * calculation) on a sequence of received data bytes (8 bits each, LSB first)
- * pass on successfully received, complete frames as SKBs via gigaset_skb_rcvd
- * notify of errors via gigaset_isdn_rcv_err
- * tally frames, errors etc. in BC structure counters
- * parameters:
- *	src	received data
- *	count	number of received bytes
- *	bcs	receiving B channel structure
- */
-static inline void hdlc_unpack(unsigned char *src, unsigned count,
-			       struct bc_state *bcs)
-{
-	struct bas_bc_state *ubc = bcs->hw.bas;
-	int inputstate;
-	unsigned seqlen, inbyte, inbits;
-
-	/* load previous state:
-	 * inputstate = set of flag bits:
-	 * - INS_flag_hunt: no complete opening flag received since connection
-	 *                  setup or last abort
-	 * - INS_have_data: at least one complete data byte received since last
-	 *                  flag
-	 * seqlen = number of consecutive '1' bits in last 7 input stream bits
-	 *          (0..7)
-	 * inbyte = accumulated partial data byte (if !INS_flag_hunt)
-	 * inbits = number of valid bits in inbyte, starting at LSB (0..6)
-	 */
-	inputstate = bcs->inputstate;
-	seqlen = ubc->seqlen;
-	inbyte = ubc->inbyte;
-	inbits = ubc->inbits;
-
-	/* bit unstuffing a byte a time
-	 * Take your time to understand this; it's straightforward but tedious.
-	 * The "bitcounts" lookup table is used to speed up the counting of
-	 * leading and trailing '1' bits.
-	 */
-	while (count--) {
-		unsigned char c = *src++;
-		unsigned char tabentry = bitcounts[c];
-		unsigned lead1 = tabentry & 0x0f;
-		unsigned trail1 = (tabentry >> 4) & 0x0f;
-
-		seqlen += lead1;
-
-		if (unlikely(inputstate & INS_flag_hunt)) {
-			if (c == PPP_FLAG) {
-				/* flag-in-one */
-				inputstate &= ~(INS_flag_hunt | INS_have_data);
-				inbyte = 0;
-				inbits = 0;
-			} else if (seqlen == 6 && trail1 != 7) {
-				/* flag completed & not followed by abort */
-				inputstate &= ~(INS_flag_hunt | INS_have_data);
-				inbyte = c >> (lead1 + 1);
-				inbits = 7 - lead1;
-				if (trail1 >= 8) {
-					/* interior stuffing:
-					 * omitting the MSB handles most cases,
-					 * correct the incorrectly handled
-					 * cases individually */
-					inbits--;
-					switch (c) {
-					case 0xbe:
-						inbyte = 0x3f;
-						break;
-					}
-				}
-			}
-			/* else: continue flag-hunting */
-		} else if (likely(seqlen < 5 && trail1 < 7)) {
-			/* streamlined case: 8 data bits, no stuffing */
-			inbyte |= c << inbits;
-			hdlc_putbyte(inbyte & 0xff, bcs);
-			inputstate |= INS_have_data;
-			inbyte >>= 8;
-			/* inbits unchanged */
-		} else if (likely(seqlen == 6 && inbits == 7 - lead1 &&
-				  trail1 + 1 == inbits &&
-				  !(inputstate & INS_have_data))) {
-			/* streamlined case: flag idle - state unchanged */
-		} else if (unlikely(seqlen > 6)) {
-			/* abort sequence */
-			ubc->aborts++;
-			hdlc_flush(bcs);
-			inputstate |= INS_flag_hunt;
-		} else if (seqlen == 6) {
-			/* closing flag, including (6 - lead1) '1's
-			 * and one '0' from inbits */
-			if (inbits > 7 - lead1) {
-				hdlc_frag(bcs, inbits + lead1 - 7);
-				inputstate &= ~INS_have_data;
-			} else {
-				if (inbits < 7 - lead1)
-					ubc->stolen0s++;
-				if (inputstate & INS_have_data) {
-					hdlc_done(bcs);
-					inputstate &= ~INS_have_data;
-				}
-			}
-
-			if (c == PPP_FLAG) {
-				/* complete flag, LSB overlaps preceding flag */
-				ubc->shared0s++;
-				inbits = 0;
-				inbyte = 0;
-			} else if (trail1 != 7) {
-				/* remaining bits */
-				inbyte = c >> (lead1 + 1);
-				inbits = 7 - lead1;
-				if (trail1 >= 8) {
-					/* interior stuffing:
-					 * omitting the MSB handles most cases,
-					 * correct the incorrectly handled
-					 * cases individually */
-					inbits--;
-					switch (c) {
-					case 0xbe:
-						inbyte = 0x3f;
-						break;
-					}
-				}
-			} else {
-				/* abort sequence follows,
-				 * skb already empty anyway */
-				ubc->aborts++;
-				inputstate |= INS_flag_hunt;
-			}
-		} else { /* (seqlen < 6) && (seqlen == 5 || trail1 >= 7) */
-
-			if (c == PPP_FLAG) {
-				/* complete flag */
-				if (seqlen == 5)
-					ubc->stolen0s++;
-				if (inbits) {
-					hdlc_frag(bcs, inbits);
-					inbits = 0;
-					inbyte = 0;
-				} else if (inputstate & INS_have_data)
-					hdlc_done(bcs);
-				inputstate &= ~INS_have_data;
-			} else if (trail1 == 7) {
-				/* abort sequence */
-				ubc->aborts++;
-				hdlc_flush(bcs);
-				inputstate |= INS_flag_hunt;
-			} else {
-				/* stuffed data */
-				if (trail1 < 7) { /* => seqlen == 5 */
-					/* stuff bit at position lead1,
-					 * no interior stuffing */
-					unsigned char mask = (1 << lead1) - 1;
-					c = (c & mask) | ((c & ~mask) >> 1);
-					inbyte |= c << inbits;
-					inbits += 7;
-				} else if (seqlen < 5) { /* trail1 >= 8 */
-					/* interior stuffing:
-					 * omitting the MSB handles most cases,
-					 * correct the incorrectly handled
-					 * cases individually */
-					switch (c) {
-					case 0xbe:
-						c = 0x7e;
-						break;
-					}
-					inbyte |= c << inbits;
-					inbits += 7;
-				} else { /* seqlen == 5 && trail1 >= 8 */
-
-					/* stuff bit at lead1 *and* interior
-					 * stuffing -- unstuff individually */
-					switch (c) {
-					case 0x7d:
-						c = 0x3f;
-						break;
-					case 0xbe:
-						c = 0x3f;
-						break;
-					case 0x3e:
-						c = 0x1f;
-						break;
-					case 0x7c:
-						c = 0x3e;
-						break;
-					}
-					inbyte |= c << inbits;
-					inbits += 6;
-				}
-				if (inbits >= 8) {
-					inbits -= 8;
-					hdlc_putbyte(inbyte & 0xff, bcs);
-					inputstate |= INS_have_data;
-					inbyte >>= 8;
-				}
-			}
-		}
-		seqlen = trail1 & 7;
-	}
-
-	/* save new state */
-	bcs->inputstate = inputstate;
-	ubc->seqlen = seqlen;
-	ubc->inbyte = inbyte;
-	ubc->inbits = inbits;
-}
-
-/* trans_receive
- * pass on received USB frame transparently as SKB via gigaset_skb_rcvd
- * invert bytes
- * tally frames, errors etc. in BC structure counters
- * parameters:
- *	src	received data
- *	count	number of received bytes
- *	bcs	receiving B channel structure
- */
-static inline void trans_receive(unsigned char *src, unsigned count,
-				 struct bc_state *bcs)
-{
-	struct sk_buff *skb;
-	int dobytes;
-	unsigned char *dst;
-
-	if (unlikely(bcs->ignore)) {
-		bcs->ignore--;
-		return;
-	}
-	skb = bcs->rx_skb;
-	if (skb == NULL) {
-		skb = gigaset_new_rx_skb(bcs);
-		if (skb == NULL)
-			return;
-	}
-	dobytes = bcs->rx_bufsize - skb->len;
-	while (count > 0) {
-		dst = skb_put(skb, count < dobytes ? count : dobytes);
-		while (count > 0 && dobytes > 0) {
-			*dst++ = bitrev8(*src++);
-			count--;
-			dobytes--;
-		}
-		if (dobytes == 0) {
-			dump_bytes(DEBUG_STREAM_DUMP,
-				   "rcv data", skb->data, skb->len);
-			bcs->hw.bas->goodbytes += skb->len;
-			gigaset_skb_rcvd(bcs, skb);
-			skb = gigaset_new_rx_skb(bcs);
-			if (skb == NULL)
-				return;
-			dobytes = bcs->rx_bufsize;
-		}
-	}
-}
-
-void gigaset_isoc_receive(unsigned char *src, unsigned count,
-			  struct bc_state *bcs)
-{
-	switch (bcs->proto2) {
-	case L2_HDLC:
-		hdlc_unpack(src, count, bcs);
-		break;
-	default:		/* assume transparent */
-		trans_receive(src, count, bcs);
-	}
-}
-
-/* == data input =========================================================== */
-
-/* process a block of received bytes in command mode (mstate != MS_LOCKED)
- * Append received bytes to the command response buffer and forward them
- * line by line to the response handler.
- * Note: Received lines may be terminated by CR, LF, or CR LF, which will be
- * removed before passing the line to the response handler.
- */
-static void cmd_loop(unsigned char *src, int numbytes, struct inbuf_t *inbuf)
-{
-	struct cardstate *cs = inbuf->cs;
-	unsigned cbytes      = cs->cbytes;
-	unsigned char c;
-
-	while (numbytes--) {
-		c = *src++;
-		switch (c) {
-		case '\n':
-			if (cbytes == 0 && cs->respdata[0] == '\r') {
-				/* collapse LF with preceding CR */
-				cs->respdata[0] = 0;
-				break;
-			}
-			/* fall through */
-		case '\r':
-			/* end of message line, pass to response handler */
-			if (cbytes >= MAX_RESP_SIZE) {
-				dev_warn(cs->dev, "response too large (%d)\n",
-					 cbytes);
-				cbytes = MAX_RESP_SIZE;
-			}
-			cs->cbytes = cbytes;
-			gigaset_dbg_buffer(DEBUG_TRANSCMD, "received response",
-					   cbytes, cs->respdata);
-			gigaset_handle_modem_response(cs);
-			cbytes = 0;
-
-			/* store EOL byte for CRLF collapsing */
-			cs->respdata[0] = c;
-			break;
-		default:
-			/* append to line buffer if possible */
-			if (cbytes < MAX_RESP_SIZE)
-				cs->respdata[cbytes] = c;
-			cbytes++;
-		}
-	}
-
-	/* save state */
-	cs->cbytes = cbytes;
-}
-
-
-/* process a block of data received through the control channel
- */
-void gigaset_isoc_input(struct inbuf_t *inbuf)
-{
-	struct cardstate *cs = inbuf->cs;
-	unsigned tail, head, numbytes;
-	unsigned char *src;
-
-	head = inbuf->head;
-	while (head != (tail = inbuf->tail)) {
-		gig_dbg(DEBUG_INTR, "buffer state: %u -> %u", head, tail);
-		if (head > tail)
-			tail = RBUFSIZE;
-		src = inbuf->data + head;
-		numbytes = tail - head;
-		gig_dbg(DEBUG_INTR, "processing %u bytes", numbytes);
-
-		if (cs->mstate == MS_LOCKED) {
-			gigaset_dbg_buffer(DEBUG_LOCKCMD, "received response",
-					   numbytes, src);
-			gigaset_if_receive(inbuf->cs, src, numbytes);
-		} else {
-			cmd_loop(src, numbytes, inbuf);
-		}
-
-		head += numbytes;
-		if (head == RBUFSIZE)
-			head = 0;
-		gig_dbg(DEBUG_INTR, "setting head to %u", head);
-		inbuf->head = head;
-	}
-}
-
-
-/* == data output ========================================================== */
-
-/**
- * gigaset_isoc_send_skb() - queue an skb for sending
- * @bcs:	B channel descriptor structure.
- * @skb:	data to send.
- *
- * Called by LL to queue an skb for sending, and start transmission if
- * necessary.
- * Once the payload data has been transmitted completely, gigaset_skb_sent()
- * will be called with the skb's link layer header preserved.
- *
- * Return value:
- *	number of bytes accepted for sending (skb->len) if ok,
- *	error code < 0 (eg. -ENODEV) on error
- */
-int gigaset_isoc_send_skb(struct bc_state *bcs, struct sk_buff *skb)
-{
-	int len = skb->len;
-	unsigned long flags;
-
-	spin_lock_irqsave(&bcs->cs->lock, flags);
-	if (!bcs->cs->connected) {
-		spin_unlock_irqrestore(&bcs->cs->lock, flags);
-		return -ENODEV;
-	}
-
-	skb_queue_tail(&bcs->squeue, skb);
-	gig_dbg(DEBUG_ISO, "%s: skb queued, qlen=%d",
-		__func__, skb_queue_len(&bcs->squeue));
-
-	/* tasklet submits URB if necessary */
-	tasklet_schedule(&bcs->hw.bas->sent_tasklet);
-	spin_unlock_irqrestore(&bcs->cs->lock, flags);
-
-	return len;	/* ok so far */
-}
diff --git a/drivers/staging/isdn/gigaset/proc.c b/drivers/staging/isdn/gigaset/proc.c
deleted file mode 100644
index 8914439a4237..000000000000
--- a/drivers/staging/isdn/gigaset/proc.c
+++ /dev/null
@@ -1,77 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Stuff used by all variants of the driver
- *
- * Copyright (c) 2001 by Stefan Eilers,
- *                       Hansjoerg Lipp <hjlipp@web.de>,
- *                       Tilman Schmidt <tilman@imap.cc>.
- *
- * =====================================================================
- * =====================================================================
- */
-
-#include "gigaset.h"
-
-static ssize_t show_cidmode(struct device *dev,
-			    struct device_attribute *attr, char *buf)
-{
-	struct cardstate *cs = dev_get_drvdata(dev);
-
-	return sprintf(buf, "%u\n", cs->cidmode);
-}
-
-static ssize_t set_cidmode(struct device *dev, struct device_attribute *attr,
-			   const char *buf, size_t count)
-{
-	struct cardstate *cs = dev_get_drvdata(dev);
-	long int value;
-	char *end;
-
-	value = simple_strtol(buf, &end, 0);
-	while (*end)
-		if (!isspace(*end++))
-			return -EINVAL;
-	if (value < 0 || value > 1)
-		return -EINVAL;
-
-	if (mutex_lock_interruptible(&cs->mutex))
-		return -ERESTARTSYS;
-
-	cs->waiting = 1;
-	if (!gigaset_add_event(cs, &cs->at_state, EV_PROC_CIDMODE,
-			       NULL, value, NULL)) {
-		cs->waiting = 0;
-		mutex_unlock(&cs->mutex);
-		return -ENOMEM;
-	}
-	gigaset_schedule_event(cs);
-
-	wait_event(cs->waitqueue, !cs->waiting);
-
-	mutex_unlock(&cs->mutex);
-
-	return count;
-}
-
-static DEVICE_ATTR(cidmode, S_IRUGO | S_IWUSR, show_cidmode, set_cidmode);
-
-/* free sysfs for device */
-void gigaset_free_dev_sysfs(struct cardstate *cs)
-{
-	if (!cs->tty_dev)
-		return;
-
-	gig_dbg(DEBUG_INIT, "removing sysfs entries");
-	device_remove_file(cs->tty_dev, &dev_attr_cidmode);
-}
-
-/* initialize sysfs for device */
-void gigaset_init_dev_sysfs(struct cardstate *cs)
-{
-	if (!cs->tty_dev)
-		return;
-
-	gig_dbg(DEBUG_INIT, "setting up sysfs");
-	if (device_create_file(cs->tty_dev, &dev_attr_cidmode))
-		pr_err("could not create sysfs attribute\n");
-}
diff --git a/drivers/staging/isdn/gigaset/ser-gigaset.c b/drivers/staging/isdn/gigaset/ser-gigaset.c
deleted file mode 100644
index 5587e9e7fc73..000000000000
--- a/drivers/staging/isdn/gigaset/ser-gigaset.c
+++ /dev/null
@@ -1,796 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/* This is the serial hardware link layer (HLL) for the Gigaset 307x isdn
- * DECT base (aka Sinus 45 isdn) using the RS232 DECT data module M101,
- * written as a line discipline.
- *
- * =====================================================================
- * =====================================================================
- */
-
-#include "gigaset.h"
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/platform_device.h>
-#include <linux/completion.h>
-
-/* Version Information */
-#define DRIVER_AUTHOR "Tilman Schmidt"
-#define DRIVER_DESC "Serial Driver for Gigaset 307x using Siemens M101"
-
-#define GIGASET_MINORS     1
-#define GIGASET_MINOR      0
-#define GIGASET_MODULENAME "ser_gigaset"
-#define GIGASET_DEVNAME    "ttyGS"
-
-/* length limit according to Siemens 3070usb-protokoll.doc ch. 2.1 */
-#define IF_WRITEBUF 264
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_LDISC(N_GIGASET_M101);
-
-static int startmode = SM_ISDN;
-module_param(startmode, int, S_IRUGO);
-MODULE_PARM_DESC(startmode, "initial operation mode");
-static int cidmode = 1;
-module_param(cidmode, int, S_IRUGO);
-MODULE_PARM_DESC(cidmode, "stay in CID mode when idle");
-
-static struct gigaset_driver *driver;
-
-struct ser_cardstate {
-	struct platform_device	dev;
-	struct tty_struct	*tty;
-	atomic_t		refcnt;
-	struct completion	dead_cmp;
-};
-
-static struct platform_driver device_driver = {
-	.driver = {
-		.name = GIGASET_MODULENAME,
-	},
-};
-
-static void flush_send_queue(struct cardstate *);
-
-/* transmit data from current open skb
- * result: number of bytes sent or error code < 0
- */
-static int write_modem(struct cardstate *cs)
-{
-	struct tty_struct *tty = cs->hw.ser->tty;
-	struct bc_state *bcs = &cs->bcs[0];	/* only one channel */
-	struct sk_buff *skb = bcs->tx_skb;
-	int sent = -EOPNOTSUPP;
-
-	WARN_ON(!tty || !tty->ops || !skb);
-
-	if (!skb->len) {
-		dev_kfree_skb_any(skb);
-		bcs->tx_skb = NULL;
-		return -EINVAL;
-	}
-
-	set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
-	if (tty->ops->write)
-		sent = tty->ops->write(tty, skb->data, skb->len);
-	gig_dbg(DEBUG_OUTPUT, "write_modem: sent %d", sent);
-	if (sent < 0) {
-		/* error */
-		flush_send_queue(cs);
-		return sent;
-	}
-	skb_pull(skb, sent);
-	if (!skb->len) {
-		/* skb sent completely */
-		gigaset_skb_sent(bcs, skb);
-
-		gig_dbg(DEBUG_INTR, "kfree skb (Adr: %lx)!",
-			(unsigned long) skb);
-		dev_kfree_skb_any(skb);
-		bcs->tx_skb = NULL;
-	}
-	return sent;
-}
-
-/*
- * transmit first queued command buffer
- * result: number of bytes sent or error code < 0
- */
-static int send_cb(struct cardstate *cs)
-{
-	struct tty_struct *tty = cs->hw.ser->tty;
-	struct cmdbuf_t *cb, *tcb;
-	unsigned long flags;
-	int sent = 0;
-
-	WARN_ON(!tty || !tty->ops);
-
-	cb = cs->cmdbuf;
-	if (!cb)
-		return 0;	/* nothing to do */
-
-	if (cb->len) {
-		set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
-		sent = tty->ops->write(tty, cb->buf + cb->offset, cb->len);
-		if (sent < 0) {
-			/* error */
-			gig_dbg(DEBUG_OUTPUT, "send_cb: write error %d", sent);
-			flush_send_queue(cs);
-			return sent;
-		}
-		cb->offset += sent;
-		cb->len -= sent;
-		gig_dbg(DEBUG_OUTPUT, "send_cb: sent %d, left %u, queued %u",
-			sent, cb->len, cs->cmdbytes);
-	}
-
-	while (cb && !cb->len) {
-		spin_lock_irqsave(&cs->cmdlock, flags);
-		cs->cmdbytes -= cs->curlen;
-		tcb = cb;
-		cs->cmdbuf = cb = cb->next;
-		if (cb) {
-			cb->prev = NULL;
-			cs->curlen = cb->len;
-		} else {
-			cs->lastcmdbuf = NULL;
-			cs->curlen = 0;
-		}
-		spin_unlock_irqrestore(&cs->cmdlock, flags);
-
-		if (tcb->wake_tasklet)
-			tasklet_schedule(tcb->wake_tasklet);
-		kfree(tcb);
-	}
-	return sent;
-}
-
-/*
- * send queue tasklet
- * If there is already a skb opened, put data to the transfer buffer
- * by calling "write_modem".
- * Otherwise take a new skb out of the queue.
- */
-static void gigaset_modem_fill(unsigned long data)
-{
-	struct cardstate *cs = (struct cardstate *) data;
-	struct bc_state *bcs;
-	struct sk_buff *nextskb;
-	int sent = 0;
-
-	if (!cs) {
-		gig_dbg(DEBUG_OUTPUT, "%s: no cardstate", __func__);
-		return;
-	}
-	bcs = cs->bcs;
-	if (!bcs) {
-		gig_dbg(DEBUG_OUTPUT, "%s: no cardstate", __func__);
-		return;
-	}
-	if (!bcs->tx_skb) {
-		/* no skb is being sent; send command if any */
-		sent = send_cb(cs);
-		gig_dbg(DEBUG_OUTPUT, "%s: send_cb -> %d", __func__, sent);
-		if (sent)
-			/* something sent or error */
-			return;
-
-		/* no command to send; get skb */
-		nextskb = skb_dequeue(&bcs->squeue);
-		if (!nextskb)
-			/* no skb either, nothing to do */
-			return;
-		bcs->tx_skb = nextskb;
-
-		gig_dbg(DEBUG_INTR, "Dequeued skb (Adr: %lx)",
-			(unsigned long) bcs->tx_skb);
-	}
-
-	/* send skb */
-	gig_dbg(DEBUG_OUTPUT, "%s: tx_skb", __func__);
-	if (write_modem(cs) < 0)
-		gig_dbg(DEBUG_OUTPUT, "%s: write_modem failed", __func__);
-}
-
-/*
- * throw away all data queued for sending
- */
-static void flush_send_queue(struct cardstate *cs)
-{
-	struct sk_buff *skb;
-	struct cmdbuf_t *cb;
-	unsigned long flags;
-
-	/* command queue */
-	spin_lock_irqsave(&cs->cmdlock, flags);
-	while ((cb = cs->cmdbuf) != NULL) {
-		cs->cmdbuf = cb->next;
-		if (cb->wake_tasklet)
-			tasklet_schedule(cb->wake_tasklet);
-		kfree(cb);
-	}
-	cs->cmdbuf = cs->lastcmdbuf = NULL;
-	cs->cmdbytes = cs->curlen = 0;
-	spin_unlock_irqrestore(&cs->cmdlock, flags);
-
-	/* data queue */
-	if (cs->bcs->tx_skb)
-		dev_kfree_skb_any(cs->bcs->tx_skb);
-	while ((skb = skb_dequeue(&cs->bcs->squeue)) != NULL)
-		dev_kfree_skb_any(skb);
-}
-
-
-/* Gigaset Driver Interface */
-/* ======================== */
-
-/*
- * queue an AT command string for transmission to the Gigaset device
- * parameters:
- *	cs		controller state structure
- *	buf		buffer containing the string to send
- *	len		number of characters to send
- *	wake_tasklet	tasklet to run when transmission is complete, or NULL
- * return value:
- *	number of bytes queued, or error code < 0
- */
-static int gigaset_write_cmd(struct cardstate *cs, struct cmdbuf_t *cb)
-{
-	unsigned long flags;
-
-	gigaset_dbg_buffer(cs->mstate != MS_LOCKED ?
-			   DEBUG_TRANSCMD : DEBUG_LOCKCMD,
-			   "CMD Transmit", cb->len, cb->buf);
-
-	spin_lock_irqsave(&cs->cmdlock, flags);
-	cb->prev = cs->lastcmdbuf;
-	if (cs->lastcmdbuf)
-		cs->lastcmdbuf->next = cb;
-	else {
-		cs->cmdbuf = cb;
-		cs->curlen = cb->len;
-	}
-	cs->cmdbytes += cb->len;
-	cs->lastcmdbuf = cb;
-	spin_unlock_irqrestore(&cs->cmdlock, flags);
-
-	spin_lock_irqsave(&cs->lock, flags);
-	if (cs->connected)
-		tasklet_schedule(&cs->write_tasklet);
-	spin_unlock_irqrestore(&cs->lock, flags);
-	return cb->len;
-}
-
-/*
- * tty_driver.write_room interface routine
- * return number of characters the driver will accept to be written
- * parameter:
- *	controller state structure
- * return value:
- *	number of characters
- */
-static int gigaset_write_room(struct cardstate *cs)
-{
-	unsigned bytes;
-
-	bytes = cs->cmdbytes;
-	return bytes < IF_WRITEBUF ? IF_WRITEBUF - bytes : 0;
-}
-
-/*
- * tty_driver.chars_in_buffer interface routine
- * return number of characters waiting to be sent
- * parameter:
- *	controller state structure
- * return value:
- *	number of characters
- */
-static int gigaset_chars_in_buffer(struct cardstate *cs)
-{
-	return cs->cmdbytes;
-}
-
-/*
- * implementation of ioctl(GIGASET_BRKCHARS)
- * parameter:
- *	controller state structure
- * return value:
- *	-EINVAL (unimplemented function)
- */
-static int gigaset_brkchars(struct cardstate *cs, const unsigned char buf[6])
-{
-	/* not implemented */
-	return -EINVAL;
-}
-
-/*
- * Open B channel
- * Called by "do_action" in ev-layer.c
- */
-static int gigaset_init_bchannel(struct bc_state *bcs)
-{
-	/* nothing to do for M10x */
-	gigaset_bchannel_up(bcs);
-	return 0;
-}
-
-/*
- * Close B channel
- * Called by "do_action" in ev-layer.c
- */
-static int gigaset_close_bchannel(struct bc_state *bcs)
-{
-	/* nothing to do for M10x */
-	gigaset_bchannel_down(bcs);
-	return 0;
-}
-
-/*
- * Set up B channel structure
- * This is called by "gigaset_initcs" in common.c
- */
-static int gigaset_initbcshw(struct bc_state *bcs)
-{
-	/* unused */
-	bcs->hw.ser = NULL;
-	return 0;
-}
-
-/*
- * Free B channel structure
- * Called by "gigaset_freebcs" in common.c
- */
-static void gigaset_freebcshw(struct bc_state *bcs)
-{
-	/* unused */
-}
-
-/*
- * Reinitialize B channel structure
- * This is called by "bcs_reinit" in common.c
- */
-static void gigaset_reinitbcshw(struct bc_state *bcs)
-{
-	/* nothing to do for M10x */
-}
-
-/*
- * Free hardware specific device data
- * This will be called by "gigaset_freecs" in common.c
- */
-static void gigaset_freecshw(struct cardstate *cs)
-{
-	tasklet_kill(&cs->write_tasklet);
-	if (!cs->hw.ser)
-		return;
-	platform_device_unregister(&cs->hw.ser->dev);
-}
-
-static void gigaset_device_release(struct device *dev)
-{
-	kfree(container_of(dev, struct ser_cardstate, dev.dev));
-}
-
-/*
- * Set up hardware specific device data
- * This is called by "gigaset_initcs" in common.c
- */
-static int gigaset_initcshw(struct cardstate *cs)
-{
-	int rc;
-	struct ser_cardstate *scs;
-
-	scs = kzalloc(sizeof(struct ser_cardstate), GFP_KERNEL);
-	if (!scs) {
-		pr_err("out of memory\n");
-		return -ENOMEM;
-	}
-	cs->hw.ser = scs;
-
-	cs->hw.ser->dev.name = GIGASET_MODULENAME;
-	cs->hw.ser->dev.id = cs->minor_index;
-	cs->hw.ser->dev.dev.release = gigaset_device_release;
-	rc = platform_device_register(&cs->hw.ser->dev);
-	if (rc != 0) {
-		pr_err("error %d registering platform device\n", rc);
-		kfree(cs->hw.ser);
-		cs->hw.ser = NULL;
-		return rc;
-	}
-
-	tasklet_init(&cs->write_tasklet,
-		     gigaset_modem_fill, (unsigned long) cs);
-	return 0;
-}
-
-/*
- * set modem control lines
- * Parameters:
- *	card state structure
- *	modem control line state ([TIOCM_DTR]|[TIOCM_RTS])
- * Called by "gigaset_start" and "gigaset_enterconfigmode" in common.c
- * and by "if_lock" and "if_termios" in interface.c
- */
-static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
-				  unsigned new_state)
-{
-	struct tty_struct *tty = cs->hw.ser->tty;
-	unsigned int set, clear;
-
-	WARN_ON(!tty || !tty->ops);
-	/* tiocmset is an optional tty driver method */
-	if (!tty->ops->tiocmset)
-		return -EINVAL;
-	set = new_state & ~old_state;
-	clear = old_state & ~new_state;
-	if (!set && !clear)
-		return 0;
-	gig_dbg(DEBUG_IF, "tiocmset set %x clear %x", set, clear);
-	return tty->ops->tiocmset(tty, set, clear);
-}
-
-static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
-{
-	return -EINVAL;
-}
-
-static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
-{
-	return -EINVAL;
-}
-
-static const struct gigaset_ops ops = {
-	.write_cmd = gigaset_write_cmd,
-	.write_room = gigaset_write_room,
-	.chars_in_buffer = gigaset_chars_in_buffer,
-	.brkchars = gigaset_brkchars,
-	.init_bchannel = gigaset_init_bchannel,
-	.close_bchannel = gigaset_close_bchannel,
-	.initbcshw = gigaset_initbcshw,
-	.freebcshw = gigaset_freebcshw,
-	.reinitbcshw = gigaset_reinitbcshw,
-	.initcshw = gigaset_initcshw,
-	.freecshw = gigaset_freecshw,
-	.set_modem_ctrl = gigaset_set_modem_ctrl,
-	.baud_rate = gigaset_baud_rate,
-	.set_line_ctrl = gigaset_set_line_ctrl,
-	.send_skb = gigaset_m10x_send_skb,	/* asyncdata.c */
-	.handle_input = gigaset_m10x_input,	/* asyncdata.c */
-};
-
-
-/* Line Discipline Interface */
-/* ========================= */
-
-/* helper functions for cardstate refcounting */
-static struct cardstate *cs_get(struct tty_struct *tty)
-{
-	struct cardstate *cs = tty->disc_data;
-
-	if (!cs || !cs->hw.ser) {
-		gig_dbg(DEBUG_ANY, "%s: no cardstate", __func__);
-		return NULL;
-	}
-	atomic_inc(&cs->hw.ser->refcnt);
-	return cs;
-}
-
-static void cs_put(struct cardstate *cs)
-{
-	if (atomic_dec_and_test(&cs->hw.ser->refcnt))
-		complete(&cs->hw.ser->dead_cmp);
-}
-
-/*
- * Called by the tty driver when the line discipline is pushed onto the tty.
- * Called in process context.
- */
-static int
-gigaset_tty_open(struct tty_struct *tty)
-{
-	struct cardstate *cs;
-	int rc;
-
-	gig_dbg(DEBUG_INIT, "Starting HLL for Gigaset M101");
-
-	pr_info(DRIVER_DESC "\n");
-
-	if (!driver) {
-		pr_err("%s: no driver structure\n", __func__);
-		return -ENODEV;
-	}
-
-	/* allocate memory for our device state and initialize it */
-	cs = gigaset_initcs(driver, 1, 1, 0, cidmode, GIGASET_MODULENAME);
-	if (!cs) {
-		rc = -ENODEV;
-		goto error;
-	}
-
-	cs->dev = &cs->hw.ser->dev.dev;
-	cs->hw.ser->tty = tty;
-	atomic_set(&cs->hw.ser->refcnt, 1);
-	init_completion(&cs->hw.ser->dead_cmp);
-	tty->disc_data = cs;
-
-	/* Set the amount of data we're willing to receive per call
-	 * from the hardware driver to half of the input buffer size
-	 * to leave some reserve.
-	 * Note: We don't do flow control towards the hardware driver.
-	 * If more data is received than will fit into the input buffer,
-	 * it will be dropped and an error will be logged. This should
-	 * never happen as the device is slow and the buffer size ample.
-	 */
-	tty->receive_room = RBUFSIZE/2;
-
-	/* OK.. Initialization of the datastructures and the HW is done.. Now
-	 * startup system and notify the LL that we are ready to run
-	 */
-	if (startmode == SM_LOCKED)
-		cs->mstate = MS_LOCKED;
-	rc = gigaset_start(cs);
-	if (rc < 0) {
-		tasklet_kill(&cs->write_tasklet);
-		goto error;
-	}
-
-	gig_dbg(DEBUG_INIT, "Startup of HLL done");
-	return 0;
-
-error:
-	gig_dbg(DEBUG_INIT, "Startup of HLL failed");
-	tty->disc_data = NULL;
-	gigaset_freecs(cs);
-	return rc;
-}
-
-/*
- * Called by the tty driver when the line discipline is removed.
- * Called from process context.
- */
-static void
-gigaset_tty_close(struct tty_struct *tty)
-{
-	struct cardstate *cs = tty->disc_data;
-
-	gig_dbg(DEBUG_INIT, "Stopping HLL for Gigaset M101");
-
-	if (!cs) {
-		gig_dbg(DEBUG_INIT, "%s: no cardstate", __func__);
-		return;
-	}
-
-	/* prevent other callers from entering ldisc methods */
-	tty->disc_data = NULL;
-
-	if (!cs->hw.ser)
-		pr_err("%s: no hw cardstate\n", __func__);
-	else {
-		/* wait for running methods to finish */
-		if (!atomic_dec_and_test(&cs->hw.ser->refcnt))
-			wait_for_completion(&cs->hw.ser->dead_cmp);
-	}
-
-	/* stop operations */
-	gigaset_stop(cs);
-	tasklet_kill(&cs->write_tasklet);
-	flush_send_queue(cs);
-	cs->dev = NULL;
-	gigaset_freecs(cs);
-
-	gig_dbg(DEBUG_INIT, "Shutdown of HLL done");
-}
-
-/*
- * Called by the tty driver when the tty line is hung up.
- * Wait for I/O to driver to complete and unregister ISDN device.
- * This is already done by the close routine, so just call that.
- * Called from process context.
- */
-static int gigaset_tty_hangup(struct tty_struct *tty)
-{
-	gigaset_tty_close(tty);
-	return 0;
-}
-
-/*
- * Ioctl on the tty.
- * Called in process context only.
- * May be re-entered by multiple ioctl calling threads.
- */
-static int
-gigaset_tty_ioctl(struct tty_struct *tty, struct file *file,
-		  unsigned int cmd, unsigned long arg)
-{
-	struct cardstate *cs = cs_get(tty);
-	int rc, val;
-	int __user *p = (int __user *)arg;
-
-	if (!cs)
-		return -ENXIO;
-
-	switch (cmd) {
-
-	case FIONREAD:
-		/* unused, always return zero */
-		val = 0;
-		rc = put_user(val, p);
-		break;
-
-	case TCFLSH:
-		/* flush our buffers and the serial port's buffer */
-		switch (arg) {
-		case TCIFLUSH:
-			/* no own input buffer to flush */
-			break;
-		case TCIOFLUSH:
-		case TCOFLUSH:
-			flush_send_queue(cs);
-			break;
-		}
-		/* fall through */
-
-	default:
-		/* pass through to underlying serial device */
-		rc = n_tty_ioctl_helper(tty, file, cmd, arg);
-		break;
-	}
-	cs_put(cs);
-	return rc;
-}
-
-/*
- * Called by the tty driver when a block of data has been received.
- * Will not be re-entered while running but other ldisc functions
- * may be called in parallel.
- * Can be called from hard interrupt level as well as soft interrupt
- * level or mainline.
- * Parameters:
- *	tty	tty structure
- *	buf	buffer containing received characters
- *	cflags	buffer containing error flags for received characters (ignored)
- *	count	number of received characters
- */
-static void
-gigaset_tty_receive(struct tty_struct *tty, const unsigned char *buf,
-		    char *cflags, int count)
-{
-	struct cardstate *cs = cs_get(tty);
-	unsigned tail, head, n;
-	struct inbuf_t *inbuf;
-
-	if (!cs)
-		return;
-	inbuf = cs->inbuf;
-	if (!inbuf) {
-		dev_err(cs->dev, "%s: no inbuf\n", __func__);
-		cs_put(cs);
-		return;
-	}
-
-	tail = inbuf->tail;
-	head = inbuf->head;
-	gig_dbg(DEBUG_INTR, "buffer state: %u -> %u, receive %u bytes",
-		head, tail, count);
-
-	if (head <= tail) {
-		/* possible buffer wraparound */
-		n = min_t(unsigned, count, RBUFSIZE - tail);
-		memcpy(inbuf->data + tail, buf, n);
-		tail = (tail + n) % RBUFSIZE;
-		buf += n;
-		count -= n;
-	}
-
-	if (count > 0) {
-		/* tail < head and some data left */
-		n = head - tail - 1;
-		if (count > n) {
-			dev_err(cs->dev,
-				"inbuf overflow, discarding %d bytes\n",
-				count - n);
-			count = n;
-		}
-		memcpy(inbuf->data + tail, buf, count);
-		tail += count;
-	}
-
-	gig_dbg(DEBUG_INTR, "setting tail to %u", tail);
-	inbuf->tail = tail;
-
-	/* Everything was received .. Push data into handler */
-	gig_dbg(DEBUG_INTR, "%s-->BH", __func__);
-	gigaset_schedule_event(cs);
-	cs_put(cs);
-}
-
-/*
- * Called by the tty driver when there's room for more data to send.
- */
-static void
-gigaset_tty_wakeup(struct tty_struct *tty)
-{
-	struct cardstate *cs = cs_get(tty);
-
-	clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
-	if (!cs)
-		return;
-	tasklet_schedule(&cs->write_tasklet);
-	cs_put(cs);
-}
-
-static struct tty_ldisc_ops gigaset_ldisc = {
-	.owner		= THIS_MODULE,
-	.magic		= TTY_LDISC_MAGIC,
-	.name		= "ser_gigaset",
-	.open		= gigaset_tty_open,
-	.close		= gigaset_tty_close,
-	.hangup		= gigaset_tty_hangup,
-	.ioctl		= gigaset_tty_ioctl,
-	.receive_buf	= gigaset_tty_receive,
-	.write_wakeup	= gigaset_tty_wakeup,
-};
-
-
-/* Initialization / Shutdown */
-/* ========================= */
-
-static int __init ser_gigaset_init(void)
-{
-	int rc;
-
-	gig_dbg(DEBUG_INIT, "%s", __func__);
-	rc = platform_driver_register(&device_driver);
-	if (rc != 0) {
-		pr_err("error %d registering platform driver\n", rc);
-		return rc;
-	}
-
-	/* allocate memory for our driver state and initialize it */
-	driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
-				    GIGASET_MODULENAME, GIGASET_DEVNAME,
-				    &ops, THIS_MODULE);
-	if (!driver) {
-		rc = -ENOMEM;
-		goto error;
-	}
-
-	rc = tty_register_ldisc(N_GIGASET_M101, &gigaset_ldisc);
-	if (rc != 0) {
-		pr_err("error %d registering line discipline\n", rc);
-		goto error;
-	}
-
-	return 0;
-
-error:
-	if (driver) {
-		gigaset_freedriver(driver);
-		driver = NULL;
-	}
-	platform_driver_unregister(&device_driver);
-	return rc;
-}
-
-static void __exit ser_gigaset_exit(void)
-{
-	int rc;
-
-	gig_dbg(DEBUG_INIT, "%s", __func__);
-
-	if (driver) {
-		gigaset_freedriver(driver);
-		driver = NULL;
-	}
-
-	rc = tty_unregister_ldisc(N_GIGASET_M101);
-	if (rc != 0)
-		pr_err("error %d unregistering line discipline\n", rc);
-
-	platform_driver_unregister(&device_driver);
-}
-
-module_init(ser_gigaset_init);
-module_exit(ser_gigaset_exit);
diff --git a/drivers/staging/isdn/gigaset/usb-gigaset.c b/drivers/staging/isdn/gigaset/usb-gigaset.c
deleted file mode 100644
index 1b9b43659bdf..000000000000
--- a/drivers/staging/isdn/gigaset/usb-gigaset.c
+++ /dev/null
@@ -1,946 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * USB driver for Gigaset 307x directly or using M105 Data.
- *
- * Copyright (c) 2001 by Stefan Eilers
- *                   and Hansjoerg Lipp <hjlipp@web.de>.
- *
- * This driver was derived from the USB skeleton driver by
- * Greg Kroah-Hartman <greg@kroah.com>
- *
- * =====================================================================
- * =====================================================================
- */
-
-#include "gigaset.h"
-#include <linux/usb.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-
-/* Version Information */
-#define DRIVER_AUTHOR "Hansjoerg Lipp <hjlipp@web.de>, Stefan Eilers"
-#define DRIVER_DESC "USB Driver for Gigaset 307x using M105"
-
-/* Module parameters */
-
-static int startmode = SM_ISDN;
-static int cidmode = 1;
-
-module_param(startmode, int, S_IRUGO);
-module_param(cidmode, int, S_IRUGO);
-MODULE_PARM_DESC(startmode, "start in isdn4linux mode");
-MODULE_PARM_DESC(cidmode, "Call-ID mode");
-
-#define GIGASET_MINORS     1
-#define GIGASET_MINOR      8
-#define GIGASET_MODULENAME "usb_gigaset"
-#define GIGASET_DEVNAME    "ttyGU"
-
-/* length limit according to Siemens 3070usb-protokoll.doc ch. 2.1 */
-#define IF_WRITEBUF 264
-
-/* Values for the Gigaset M105 Data */
-#define USB_M105_VENDOR_ID	0x0681
-#define USB_M105_PRODUCT_ID	0x0009
-
-/* table of devices that work with this driver */
-static const struct usb_device_id gigaset_table[] = {
-	{ USB_DEVICE(USB_M105_VENDOR_ID, USB_M105_PRODUCT_ID) },
-	{ }					/* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, gigaset_table);
-
-/*
- * Control requests (empty fields: 00)
- *
- *       RT|RQ|VALUE|INDEX|LEN  |DATA
- * In:
- *       C1 08             01
- *            Get flags (1 byte). Bits: 0=dtr,1=rts,3-7:?
- *       C1 0F             ll ll
- *            Get device information/status (llll: 0x200 and 0x40 seen).
- *            Real size: I only saw MIN(llll,0x64).
- *            Contents: seems to be always the same...
- *              offset 0x00: Length of this structure (0x64) (len: 1,2,3 bytes)
- *              offset 0x3c: String (16 bit chars): "MCCI USB Serial V2.0"
- *              rest:        ?
- * Out:
- *       41 11
- *            Initialize/reset device ?
- *       41 00 xx 00
- *            ? (xx=00 or 01; 01 on start, 00 on close)
- *       41 07 vv mm
- *            Set/clear flags vv=value, mm=mask (see RQ 08)
- *       41 12 xx
- *            Used before the following configuration requests are issued
- *            (with xx=0x0f). I've seen other values<0xf, though.
- *       41 01 xx xx
- *            Set baud rate. xxxx=ceil(0x384000/rate)=trunc(0x383fff/rate)+1.
- *       41 03 ps bb
- *            Set byte size and parity. p:  0x20=even,0x10=odd,0x00=no parity
- *                                     [    0x30: m, 0x40: s           ]
- *                                     [s:  0: 1 stop bit; 1: 1.5; 2: 2]
- *                                      bb: bits/byte (seen 7 and 8)
- *       41 13 -- -- -- -- 10 00 ww 00 00 00 xx 00 00 00 yy 00 00 00 zz 00 00 00
- *            ??
- *            Initialization: 01, 40, 00, 00
- *            Open device:    00  40, 00, 00
- *            yy and zz seem to be equal, either 0x00 or 0x0a
- *            (ww,xx) pairs seen: (00,00), (00,40), (01,40), (09,80), (19,80)
- *       41 19 -- -- -- -- 06 00 00 00 00 xx 11 13
- *            Used after every "configuration sequence" (RQ 12, RQs 01/03/13).
- *            xx is usually 0x00 but was 0x7e before starting data transfer
- *            in unimodem mode. So, this might be an array of characters that
- *            need special treatment ("commit all bufferd data"?), 11=^Q, 13=^S.
- *
- * Unimodem mode: use "modprobe ppp_async flag_time=0" as the device _needs_ two
- * flags per packet.
- */
-
-/* functions called if a device of this driver is connected/disconnected */
-static int gigaset_probe(struct usb_interface *interface,
-			 const struct usb_device_id *id);
-static void gigaset_disconnect(struct usb_interface *interface);
-
-/* functions called before/after suspend */
-static int gigaset_suspend(struct usb_interface *intf, pm_message_t message);
-static int gigaset_resume(struct usb_interface *intf);
-static int gigaset_pre_reset(struct usb_interface *intf);
-
-static struct gigaset_driver *driver;
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver gigaset_usb_driver = {
-	.name =		GIGASET_MODULENAME,
-	.probe =	gigaset_probe,
-	.disconnect =	gigaset_disconnect,
-	.id_table =	gigaset_table,
-	.suspend =	gigaset_suspend,
-	.resume =	gigaset_resume,
-	.reset_resume =	gigaset_resume,
-	.pre_reset =	gigaset_pre_reset,
-	.post_reset =	gigaset_resume,
-	.disable_hub_initiated_lpm = 1,
-};
-
-struct usb_cardstate {
-	struct usb_device	*udev;		/* usb device pointer */
-	struct usb_interface	*interface;	/* interface for this device */
-	int			busy;		/* bulk output in progress */
-
-	/* Output buffer */
-	unsigned char		*bulk_out_buffer;
-	int			bulk_out_size;
-	int			bulk_out_epnum;
-	struct urb		*bulk_out_urb;
-
-	/* Input buffer */
-	unsigned char		*rcvbuf;
-	int			rcvbuf_size;
-	struct urb		*read_urb;
-
-	char			bchars[6];		/* for request 0x19 */
-};
-
-static inline unsigned tiocm_to_gigaset(unsigned state)
-{
-	return ((state & TIOCM_DTR) ? 1 : 0) | ((state & TIOCM_RTS) ? 2 : 0);
-}
-
-static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
-				  unsigned new_state)
-{
-	struct usb_device *udev = cs->hw.usb->udev;
-	unsigned mask, val;
-	int r;
-
-	mask = tiocm_to_gigaset(old_state ^ new_state);
-	val = tiocm_to_gigaset(new_state);
-
-	gig_dbg(DEBUG_USBREQ, "set flags 0x%02x with mask 0x%02x", val, mask);
-	r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 7, 0x41,
-			    (val & 0xff) | ((mask & 0xff) << 8), 0,
-			    NULL, 0, 2000 /* timeout? */);
-	if (r < 0)
-		return r;
-	return 0;
-}
-
-/*
- * Set M105 configuration value
- * using undocumented device commands reverse engineered from USB traces
- * of the Siemens Windows driver
- */
-static int set_value(struct cardstate *cs, u8 req, u16 val)
-{
-	struct usb_device *udev = cs->hw.usb->udev;
-	int r, r2;
-
-	gig_dbg(DEBUG_USBREQ, "request %02x (%04x)",
-		(unsigned)req, (unsigned)val);
-	r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x12, 0x41,
-			    0xf /*?*/, 0, NULL, 0, 2000 /*?*/);
-	/* no idea what this does */
-	if (r < 0) {
-		dev_err(&udev->dev, "error %d on request 0x12\n", -r);
-		return r;
-	}
-
-	r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), req, 0x41,
-			    val, 0, NULL, 0, 2000 /*?*/);
-	if (r < 0)
-		dev_err(&udev->dev, "error %d on request 0x%02x\n",
-			-r, (unsigned)req);
-
-	r2 = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x19, 0x41,
-			     0, 0, cs->hw.usb->bchars, 6, 2000 /*?*/);
-	if (r2 < 0)
-		dev_err(&udev->dev, "error %d on request 0x19\n", -r2);
-
-	return r < 0 ? r : (r2 < 0 ? r2 : 0);
-}
-
-/*
- * set the baud rate on the internal serial adapter
- * using the undocumented parameter setting command
- */
-static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
-{
-	u16 val;
-	u32 rate;
-
-	cflag &= CBAUD;
-
-	switch (cflag) {
-	case    B300: rate =     300; break;
-	case    B600: rate =     600; break;
-	case   B1200: rate =    1200; break;
-	case   B2400: rate =    2400; break;
-	case   B4800: rate =    4800; break;
-	case   B9600: rate =    9600; break;
-	case  B19200: rate =   19200; break;
-	case  B38400: rate =   38400; break;
-	case  B57600: rate =   57600; break;
-	case B115200: rate =  115200; break;
-	default:
-		rate =  9600;
-		dev_err(cs->dev, "unsupported baudrate request 0x%x,"
-			" using default of B9600\n", cflag);
-	}
-
-	val = 0x383fff / rate + 1;
-
-	return set_value(cs, 1, val);
-}
-
-/*
- * set the line format on the internal serial adapter
- * using the undocumented parameter setting command
- */
-static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
-{
-	u16 val = 0;
-
-	/* set the parity */
-	if (cflag & PARENB)
-		val |= (cflag & PARODD) ? 0x10 : 0x20;
-
-	/* set the number of data bits */
-	switch (cflag & CSIZE) {
-	case CS5:
-		val |= 5 << 8; break;
-	case CS6:
-		val |= 6 << 8; break;
-	case CS7:
-		val |= 7 << 8; break;
-	case CS8:
-		val |= 8 << 8; break;
-	default:
-		dev_err(cs->dev, "CSIZE was not CS5-CS8, using default of 8\n");
-		val |= 8 << 8;
-		break;
-	}
-
-	/* set the number of stop bits */
-	if (cflag & CSTOPB) {
-		if ((cflag & CSIZE) == CS5)
-			val |= 1; /* 1.5 stop bits */
-		else
-			val |= 2; /* 2 stop bits */
-	}
-
-	return set_value(cs, 3, val);
-}
-
-
-/*============================================================================*/
-static int gigaset_init_bchannel(struct bc_state *bcs)
-{
-	/* nothing to do for M10x */
-	gigaset_bchannel_up(bcs);
-	return 0;
-}
-
-static int gigaset_close_bchannel(struct bc_state *bcs)
-{
-	/* nothing to do for M10x */
-	gigaset_bchannel_down(bcs);
-	return 0;
-}
-
-static int write_modem(struct cardstate *cs);
-static int send_cb(struct cardstate *cs);
-
-
-/* Write tasklet handler: Continue sending current skb, or send command, or
- * start sending an skb from the send queue.
- */
-static void gigaset_modem_fill(unsigned long data)
-{
-	struct cardstate *cs = (struct cardstate *) data;
-	struct bc_state *bcs = &cs->bcs[0]; /* only one channel */
-
-	gig_dbg(DEBUG_OUTPUT, "modem_fill");
-
-	if (cs->hw.usb->busy) {
-		gig_dbg(DEBUG_OUTPUT, "modem_fill: busy");
-		return;
-	}
-
-again:
-	if (!bcs->tx_skb) {	/* no skb is being sent */
-		if (cs->cmdbuf) {	/* commands to send? */
-			gig_dbg(DEBUG_OUTPUT, "modem_fill: cb");
-			if (send_cb(cs) < 0) {
-				gig_dbg(DEBUG_OUTPUT,
-					"modem_fill: send_cb failed");
-				goto again; /* no callback will be called! */
-			}
-			return;
-		}
-
-		/* skbs to send? */
-		bcs->tx_skb = skb_dequeue(&bcs->squeue);
-		if (!bcs->tx_skb)
-			return;
-
-		gig_dbg(DEBUG_INTR, "Dequeued skb (Adr: %lx)!",
-			(unsigned long) bcs->tx_skb);
-	}
-
-	gig_dbg(DEBUG_OUTPUT, "modem_fill: tx_skb");
-	if (write_modem(cs) < 0) {
-		gig_dbg(DEBUG_OUTPUT, "modem_fill: write_modem failed");
-		goto again;	/* no callback will be called! */
-	}
-}
-
-/*
- * Interrupt Input URB completion routine
- */
-static void gigaset_read_int_callback(struct urb *urb)
-{
-	struct cardstate *cs = urb->context;
-	struct inbuf_t *inbuf = cs->inbuf;
-	int status = urb->status;
-	int r;
-	unsigned numbytes;
-	unsigned char *src;
-	unsigned long flags;
-
-	if (!status) {
-		numbytes = urb->actual_length;
-
-		if (numbytes) {
-			src = cs->hw.usb->rcvbuf;
-			if (unlikely(*src))
-				dev_warn(cs->dev,
-					 "%s: There was no leading 0, but 0x%02x!\n",
-					 __func__, (unsigned) *src);
-			++src; /* skip leading 0x00 */
-			--numbytes;
-			if (gigaset_fill_inbuf(inbuf, src, numbytes)) {
-				gig_dbg(DEBUG_INTR, "%s-->BH", __func__);
-				gigaset_schedule_event(inbuf->cs);
-			}
-		} else
-			gig_dbg(DEBUG_INTR, "Received zero block length");
-	} else {
-		/* The urb might have been killed. */
-		gig_dbg(DEBUG_ANY, "%s - nonzero status received: %d",
-			__func__, status);
-		if (status == -ENOENT || status == -ESHUTDOWN)
-			/* killed or endpoint shutdown: don't resubmit */
-			return;
-	}
-
-	/* resubmit URB */
-	spin_lock_irqsave(&cs->lock, flags);
-	if (!cs->connected) {
-		spin_unlock_irqrestore(&cs->lock, flags);
-		pr_err("%s: disconnected\n", __func__);
-		return;
-	}
-	r = usb_submit_urb(urb, GFP_ATOMIC);
-	spin_unlock_irqrestore(&cs->lock, flags);
-	if (r)
-		dev_err(cs->dev, "error %d resubmitting URB\n", -r);
-}
-
-
-/* This callback routine is called when data was transmitted to the device. */
-static void gigaset_write_bulk_callback(struct urb *urb)
-{
-	struct cardstate *cs = urb->context;
-	int status = urb->status;
-	unsigned long flags;
-
-	switch (status) {
-	case 0:			/* normal completion */
-		break;
-	case -ENOENT:		/* killed */
-		gig_dbg(DEBUG_ANY, "%s: killed", __func__);
-		cs->hw.usb->busy = 0;
-		return;
-	default:
-		dev_err(cs->dev, "bulk transfer failed (status %d)\n",
-			-status);
-		/* That's all we can do. Communication problems
-		   are handled by timeouts or network protocols. */
-	}
-
-	spin_lock_irqsave(&cs->lock, flags);
-	if (!cs->connected) {
-		pr_err("%s: disconnected\n", __func__);
-	} else {
-		cs->hw.usb->busy = 0;
-		tasklet_schedule(&cs->write_tasklet);
-	}
-	spin_unlock_irqrestore(&cs->lock, flags);
-}
-
-static int send_cb(struct cardstate *cs)
-{
-	struct cmdbuf_t *cb = cs->cmdbuf;
-	unsigned long flags;
-	int count;
-	int status = -ENOENT;
-	struct usb_cardstate *ucs = cs->hw.usb;
-
-	do {
-		if (!cb->len) {
-			spin_lock_irqsave(&cs->cmdlock, flags);
-			cs->cmdbytes -= cs->curlen;
-			gig_dbg(DEBUG_OUTPUT, "send_cb: sent %u bytes, %u left",
-				cs->curlen, cs->cmdbytes);
-			cs->cmdbuf = cb->next;
-			if (cs->cmdbuf) {
-				cs->cmdbuf->prev = NULL;
-				cs->curlen = cs->cmdbuf->len;
-			} else {
-				cs->lastcmdbuf = NULL;
-				cs->curlen = 0;
-			}
-			spin_unlock_irqrestore(&cs->cmdlock, flags);
-
-			if (cb->wake_tasklet)
-				tasklet_schedule(cb->wake_tasklet);
-			kfree(cb);
-
-			cb = cs->cmdbuf;
-		}
-
-		if (cb) {
-			count = min(cb->len, ucs->bulk_out_size);
-			gig_dbg(DEBUG_OUTPUT, "send_cb: send %d bytes", count);
-
-			usb_fill_bulk_urb(ucs->bulk_out_urb, ucs->udev,
-					  usb_sndbulkpipe(ucs->udev,
-							  ucs->bulk_out_epnum),
-					  cb->buf + cb->offset, count,
-					  gigaset_write_bulk_callback, cs);
-
-			cb->offset += count;
-			cb->len -= count;
-			ucs->busy = 1;
-
-			spin_lock_irqsave(&cs->lock, flags);
-			status = cs->connected ?
-				usb_submit_urb(ucs->bulk_out_urb, GFP_ATOMIC) :
-				-ENODEV;
-			spin_unlock_irqrestore(&cs->lock, flags);
-
-			if (status) {
-				ucs->busy = 0;
-				dev_err(cs->dev,
-					"could not submit urb (error %d)\n",
-					-status);
-				cb->len = 0; /* skip urb => remove cb+wakeup
-						in next loop cycle */
-			}
-		}
-	} while (cb && status); /* next command on error */
-
-	return status;
-}
-
-/* Send command to device. */
-static int gigaset_write_cmd(struct cardstate *cs, struct cmdbuf_t *cb)
-{
-	unsigned long flags;
-	int len;
-
-	gigaset_dbg_buffer(cs->mstate != MS_LOCKED ?
-			   DEBUG_TRANSCMD : DEBUG_LOCKCMD,
-			   "CMD Transmit", cb->len, cb->buf);
-
-	spin_lock_irqsave(&cs->cmdlock, flags);
-	cb->prev = cs->lastcmdbuf;
-	if (cs->lastcmdbuf)
-		cs->lastcmdbuf->next = cb;
-	else {
-		cs->cmdbuf = cb;
-		cs->curlen = cb->len;
-	}
-	cs->cmdbytes += cb->len;
-	cs->lastcmdbuf = cb;
-	spin_unlock_irqrestore(&cs->cmdlock, flags);
-
-	spin_lock_irqsave(&cs->lock, flags);
-	len = cb->len;
-	if (cs->connected)
-		tasklet_schedule(&cs->write_tasklet);
-	spin_unlock_irqrestore(&cs->lock, flags);
-	return len;
-}
-
-static int gigaset_write_room(struct cardstate *cs)
-{
-	unsigned bytes;
-
-	bytes = cs->cmdbytes;
-	return bytes < IF_WRITEBUF ? IF_WRITEBUF - bytes : 0;
-}
-
-static int gigaset_chars_in_buffer(struct cardstate *cs)
-{
-	return cs->cmdbytes;
-}
-
-/*
- * set the break characters on the internal serial adapter
- * using undocumented device commands reverse engineered from USB traces
- * of the Siemens Windows driver
- */
-static int gigaset_brkchars(struct cardstate *cs, const unsigned char buf[6])
-{
-	struct usb_device *udev = cs->hw.usb->udev;
-
-	gigaset_dbg_buffer(DEBUG_USBREQ, "brkchars", 6, buf);
-	memcpy(cs->hw.usb->bchars, buf, 6);
-	return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x19, 0x41,
-			       0, 0, &buf, 6, 2000);
-}
-
-static void gigaset_freebcshw(struct bc_state *bcs)
-{
-	/* unused */
-}
-
-/* Initialize the b-channel structure */
-static int gigaset_initbcshw(struct bc_state *bcs)
-{
-	/* unused */
-	bcs->hw.usb = NULL;
-	return 0;
-}
-
-static void gigaset_reinitbcshw(struct bc_state *bcs)
-{
-	/* nothing to do for M10x */
-}
-
-static void gigaset_freecshw(struct cardstate *cs)
-{
-	tasklet_kill(&cs->write_tasklet);
-	kfree(cs->hw.usb);
-}
-
-static int gigaset_initcshw(struct cardstate *cs)
-{
-	struct usb_cardstate *ucs;
-
-	cs->hw.usb = ucs =
-		kmalloc(sizeof(struct usb_cardstate), GFP_KERNEL);
-	if (!ucs) {
-		pr_err("out of memory\n");
-		return -ENOMEM;
-	}
-
-	ucs->bchars[0] = 0;
-	ucs->bchars[1] = 0;
-	ucs->bchars[2] = 0;
-	ucs->bchars[3] = 0;
-	ucs->bchars[4] = 0x11;
-	ucs->bchars[5] = 0x13;
-	ucs->bulk_out_buffer = NULL;
-	ucs->bulk_out_urb = NULL;
-	ucs->read_urb = NULL;
-	tasklet_init(&cs->write_tasklet,
-		     gigaset_modem_fill, (unsigned long) cs);
-
-	return 0;
-}
-
-/* Send data from current skb to the device. */
-static int write_modem(struct cardstate *cs)
-{
-	int ret = 0;
-	int count;
-	struct bc_state *bcs = &cs->bcs[0]; /* only one channel */
-	struct usb_cardstate *ucs = cs->hw.usb;
-	unsigned long flags;
-
-	gig_dbg(DEBUG_OUTPUT, "len: %d...", bcs->tx_skb->len);
-
-	if (!bcs->tx_skb->len) {
-		dev_kfree_skb_any(bcs->tx_skb);
-		bcs->tx_skb = NULL;
-		return -EINVAL;
-	}
-
-	/* Copy data to bulk out buffer and transmit data */
-	count = min(bcs->tx_skb->len, (unsigned) ucs->bulk_out_size);
-	skb_copy_from_linear_data(bcs->tx_skb, ucs->bulk_out_buffer, count);
-	skb_pull(bcs->tx_skb, count);
-	ucs->busy = 1;
-	gig_dbg(DEBUG_OUTPUT, "write_modem: send %d bytes", count);
-
-	spin_lock_irqsave(&cs->lock, flags);
-	if (cs->connected) {
-		usb_fill_bulk_urb(ucs->bulk_out_urb, ucs->udev,
-				  usb_sndbulkpipe(ucs->udev,
-						  ucs->bulk_out_epnum),
-				  ucs->bulk_out_buffer, count,
-				  gigaset_write_bulk_callback, cs);
-		ret = usb_submit_urb(ucs->bulk_out_urb, GFP_ATOMIC);
-	} else {
-		ret = -ENODEV;
-	}
-	spin_unlock_irqrestore(&cs->lock, flags);
-
-	if (ret) {
-		dev_err(cs->dev, "could not submit urb (error %d)\n", -ret);
-		ucs->busy = 0;
-	}
-
-	if (!bcs->tx_skb->len) {
-		/* skb sent completely */
-		gigaset_skb_sent(bcs, bcs->tx_skb);
-
-		gig_dbg(DEBUG_INTR, "kfree skb (Adr: %lx)!",
-			(unsigned long) bcs->tx_skb);
-		dev_kfree_skb_any(bcs->tx_skb);
-		bcs->tx_skb = NULL;
-	}
-
-	return ret;
-}
-
-static int gigaset_probe(struct usb_interface *interface,
-			 const struct usb_device_id *id)
-{
-	int retval;
-	struct usb_device *udev = interface_to_usbdev(interface);
-	struct usb_host_interface *hostif = interface->cur_altsetting;
-	struct cardstate *cs = NULL;
-	struct usb_cardstate *ucs = NULL;
-	struct usb_endpoint_descriptor *endpoint;
-	int buffer_size;
-
-	gig_dbg(DEBUG_ANY, "%s: Check if device matches ...", __func__);
-
-	/* See if the device offered us matches what we can accept */
-	if ((le16_to_cpu(udev->descriptor.idVendor)  != USB_M105_VENDOR_ID) ||
-	    (le16_to_cpu(udev->descriptor.idProduct) != USB_M105_PRODUCT_ID)) {
-		gig_dbg(DEBUG_ANY, "device ID (0x%x, 0x%x) not for me - skip",
-			le16_to_cpu(udev->descriptor.idVendor),
-			le16_to_cpu(udev->descriptor.idProduct));
-		return -ENODEV;
-	}
-	if (hostif->desc.bInterfaceNumber != 0) {
-		gig_dbg(DEBUG_ANY, "interface %d not for me - skip",
-			hostif->desc.bInterfaceNumber);
-		return -ENODEV;
-	}
-	if (hostif->desc.bAlternateSetting != 0) {
-		dev_notice(&udev->dev, "unsupported altsetting %d - skip",
-			   hostif->desc.bAlternateSetting);
-		return -ENODEV;
-	}
-	if (hostif->desc.bInterfaceClass != 255) {
-		dev_notice(&udev->dev, "unsupported interface class %d - skip",
-			   hostif->desc.bInterfaceClass);
-		return -ENODEV;
-	}
-
-	dev_info(&udev->dev, "%s: Device matched ... !\n", __func__);
-
-	/* allocate memory for our device state and initialize it */
-	cs = gigaset_initcs(driver, 1, 1, 0, cidmode, GIGASET_MODULENAME);
-	if (!cs)
-		return -ENODEV;
-	ucs = cs->hw.usb;
-
-	/* save off device structure ptrs for later use */
-	usb_get_dev(udev);
-	ucs->udev = udev;
-	ucs->interface = interface;
-	cs->dev = &interface->dev;
-
-	/* save address of controller structure */
-	usb_set_intfdata(interface, cs);
-
-	endpoint = &hostif->endpoint[0].desc;
-
-	buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
-	ucs->bulk_out_size = buffer_size;
-	ucs->bulk_out_epnum = usb_endpoint_num(endpoint);
-	ucs->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
-	if (!ucs->bulk_out_buffer) {
-		dev_err(cs->dev, "Couldn't allocate bulk_out_buffer\n");
-		retval = -ENOMEM;
-		goto error;
-	}
-
-	ucs->bulk_out_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!ucs->bulk_out_urb) {
-		dev_err(cs->dev, "Couldn't allocate bulk_out_urb\n");
-		retval = -ENOMEM;
-		goto error;
-	}
-
-	endpoint = &hostif->endpoint[1].desc;
-
-	ucs->busy = 0;
-
-	ucs->read_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!ucs->read_urb) {
-		dev_err(cs->dev, "No free urbs available\n");
-		retval = -ENOMEM;
-		goto error;
-	}
-	buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
-	ucs->rcvbuf_size = buffer_size;
-	ucs->rcvbuf = kmalloc(buffer_size, GFP_KERNEL);
-	if (!ucs->rcvbuf) {
-		dev_err(cs->dev, "Couldn't allocate rcvbuf\n");
-		retval = -ENOMEM;
-		goto error;
-	}
-	/* Fill the interrupt urb and send it to the core */
-	usb_fill_int_urb(ucs->read_urb, udev,
-			 usb_rcvintpipe(udev, usb_endpoint_num(endpoint)),
-			 ucs->rcvbuf, buffer_size,
-			 gigaset_read_int_callback,
-			 cs, endpoint->bInterval);
-
-	retval = usb_submit_urb(ucs->read_urb, GFP_KERNEL);
-	if (retval) {
-		dev_err(cs->dev, "Could not submit URB (error %d)\n", -retval);
-		goto error;
-	}
-
-	/* tell common part that the device is ready */
-	if (startmode == SM_LOCKED)
-		cs->mstate = MS_LOCKED;
-
-	retval = gigaset_start(cs);
-	if (retval < 0) {
-		tasklet_kill(&cs->write_tasklet);
-		goto error;
-	}
-	return 0;
-
-error:
-	usb_kill_urb(ucs->read_urb);
-	kfree(ucs->bulk_out_buffer);
-	usb_free_urb(ucs->bulk_out_urb);
-	kfree(ucs->rcvbuf);
-	usb_free_urb(ucs->read_urb);
-	usb_set_intfdata(interface, NULL);
-	ucs->read_urb = ucs->bulk_out_urb = NULL;
-	ucs->rcvbuf = ucs->bulk_out_buffer = NULL;
-	usb_put_dev(ucs->udev);
-	ucs->udev = NULL;
-	ucs->interface = NULL;
-	gigaset_freecs(cs);
-	return retval;
-}
-
-static void gigaset_disconnect(struct usb_interface *interface)
-{
-	struct cardstate *cs;
-	struct usb_cardstate *ucs;
-
-	cs = usb_get_intfdata(interface);
-	ucs = cs->hw.usb;
-
-	dev_info(cs->dev, "disconnecting Gigaset USB adapter\n");
-
-	usb_kill_urb(ucs->read_urb);
-
-	gigaset_stop(cs);
-
-	usb_set_intfdata(interface, NULL);
-	tasklet_kill(&cs->write_tasklet);
-
-	usb_kill_urb(ucs->bulk_out_urb);
-
-	kfree(ucs->bulk_out_buffer);
-	usb_free_urb(ucs->bulk_out_urb);
-	kfree(ucs->rcvbuf);
-	usb_free_urb(ucs->read_urb);
-	ucs->read_urb = ucs->bulk_out_urb = NULL;
-	ucs->rcvbuf = ucs->bulk_out_buffer = NULL;
-
-	usb_put_dev(ucs->udev);
-	ucs->interface = NULL;
-	ucs->udev = NULL;
-	cs->dev = NULL;
-	gigaset_freecs(cs);
-}
-
-/* gigaset_suspend
- * This function is called before the USB connection is suspended or reset.
- */
-static int gigaset_suspend(struct usb_interface *intf, pm_message_t message)
-{
-	struct cardstate *cs = usb_get_intfdata(intf);
-
-	/* stop activity */
-	cs->connected = 0;	/* prevent rescheduling */
-	usb_kill_urb(cs->hw.usb->read_urb);
-	tasklet_kill(&cs->write_tasklet);
-	usb_kill_urb(cs->hw.usb->bulk_out_urb);
-
-	gig_dbg(DEBUG_SUSPEND, "suspend complete");
-	return 0;
-}
-
-/* gigaset_resume
- * This function is called after the USB connection has been resumed or reset.
- */
-static int gigaset_resume(struct usb_interface *intf)
-{
-	struct cardstate *cs = usb_get_intfdata(intf);
-	int rc;
-
-	/* resubmit interrupt URB */
-	cs->connected = 1;
-	rc = usb_submit_urb(cs->hw.usb->read_urb, GFP_KERNEL);
-	if (rc) {
-		dev_err(cs->dev, "Could not submit read URB (error %d)\n", -rc);
-		return rc;
-	}
-
-	gig_dbg(DEBUG_SUSPEND, "resume complete");
-	return 0;
-}
-
-/* gigaset_pre_reset
- * This function is called before the USB connection is reset.
- */
-static int gigaset_pre_reset(struct usb_interface *intf)
-{
-	/* same as suspend */
-	return gigaset_suspend(intf, PMSG_ON);
-}
-
-static const struct gigaset_ops ops = {
-	.write_cmd = gigaset_write_cmd,
-	.write_room = gigaset_write_room,
-	.chars_in_buffer = gigaset_chars_in_buffer,
-	.brkchars = gigaset_brkchars,
-	.init_bchannel = gigaset_init_bchannel,
-	.close_bchannel = gigaset_close_bchannel,
-	.initbcshw = gigaset_initbcshw,
-	.freebcshw = gigaset_freebcshw,
-	.reinitbcshw = gigaset_reinitbcshw,
-	.initcshw = gigaset_initcshw,
-	.freecshw = gigaset_freecshw,
-	.set_modem_ctrl = gigaset_set_modem_ctrl,
-	.baud_rate = gigaset_baud_rate,
-	.set_line_ctrl = gigaset_set_line_ctrl,
-	.send_skb = gigaset_m10x_send_skb,
-	.handle_input = gigaset_m10x_input,
-};
-
-/*
- * This function is called while kernel-module is loaded
- */
-static int __init usb_gigaset_init(void)
-{
-	int result;
-
-	/* allocate memory for our driver state and initialize it */
-	driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
-				    GIGASET_MODULENAME, GIGASET_DEVNAME,
-				    &ops, THIS_MODULE);
-	if (driver == NULL) {
-		result = -ENOMEM;
-		goto error;
-	}
-
-	/* register this driver with the USB subsystem */
-	result = usb_register(&gigaset_usb_driver);
-	if (result < 0) {
-		pr_err("error %d registering USB driver\n", -result);
-		goto error;
-	}
-
-	pr_info(DRIVER_DESC "\n");
-	return 0;
-
-error:
-	if (driver)
-		gigaset_freedriver(driver);
-	driver = NULL;
-	return result;
-}
-
-/*
- * This function is called while unloading the kernel-module
- */
-static void __exit usb_gigaset_exit(void)
-{
-	int i;
-
-	gigaset_blockdriver(driver); /* => probe will fail
-				      * => no gigaset_start any more
-				      */
-
-	/* stop all connected devices */
-	for (i = 0; i < driver->minors; i++)
-		gigaset_shutdown(driver->cs + i);
-
-	/* from now on, no isdn callback should be possible */
-
-	/* deregister this driver with the USB subsystem */
-	usb_deregister(&gigaset_usb_driver);
-	/* this will call the disconnect-callback */
-	/* from now on, no disconnect/probe callback should be running */
-
-	gigaset_freedriver(driver);
-	driver = NULL;
-}
-
-
-module_init(usb_gigaset_init);
-module_exit(usb_gigaset_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/isdn/hysdn/Kconfig b/drivers/staging/isdn/hysdn/Kconfig
deleted file mode 100644
index 4c8a9283b9dd..000000000000
--- a/drivers/staging/isdn/hysdn/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config HYSDN
-	tristate "Hypercope HYSDN cards (Champ, Ergo, Metro) support (module only)"
-	depends on m && PROC_FS && PCI
-	help
-	  Say Y here if you have one of Hypercope's active PCI ISDN cards
-	  Champ, Ergo and Metro. You will then get a module called hysdn.
-	  Please read the file <file:Documentation/isdn/hysdn.rst> for more
-	  information.
-
-config HYSDN_CAPI
-	bool "HYSDN CAPI 2.0 support"
-	depends on HYSDN && ISDN_CAPI
-	help
-	  Say Y here if you like to use Hypercope's CAPI 2.0 interface.
diff --git a/drivers/staging/isdn/hysdn/Makefile b/drivers/staging/isdn/hysdn/Makefile
deleted file mode 100644
index e01f17f22ebb..000000000000
--- a/drivers/staging/isdn/hysdn/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# Makefile for the hysdn ISDN device driver
-
-# Each configuration option enables a list of files.
-
-obj-$(CONFIG_HYSDN)		+= hysdn.o
-
-# Multipart objects.
-
-hysdn-y				:= hysdn_procconf.o hysdn_proclog.o boardergo.o \
-				   hysdn_boot.o hysdn_sched.o hysdn_net.o hysdn_init.o
-hysdn-$(CONFIG_HYSDN_CAPI)	+= hycapi.o
diff --git a/drivers/staging/isdn/hysdn/boardergo.c b/drivers/staging/isdn/hysdn/boardergo.c
deleted file mode 100644
index 2aa2a0e08247..000000000000
--- a/drivers/staging/isdn/hysdn/boardergo.c
+++ /dev/null
@@ -1,445 +0,0 @@
-/* $Id: boardergo.c,v 1.5.6.7 2001/11/06 21:58:19 kai Exp $
- *
- * Linux driver for HYSDN cards, specific routines for ergo type boards.
- *
- * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
- * Copyright 1999 by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * As all Linux supported cards Champ2, Ergo and Metro2/4 use the same
- * DPRAM interface and layout with only minor differences all related
- * stuff is done here, not in separate modules.
- *
- */
-
-#include <linux/signal.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/vmalloc.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-
-#include "hysdn_defs.h"
-#include "boardergo.h"
-
-#define byteout(addr, val) outb(val, addr)
-#define bytein(addr) inb(addr)
-
-/***************************************************/
-/* The cards interrupt handler. Called from system */
-/***************************************************/
-static irqreturn_t
-ergo_interrupt(int intno, void *dev_id)
-{
-	hysdn_card *card = dev_id;	/* parameter from irq */
-	tErgDpram *dpr;
-	unsigned long flags;
-	unsigned char volatile b;
-
-	if (!card)
-		return IRQ_NONE;		/* error -> spurious interrupt */
-	if (!card->irq_enabled)
-		return IRQ_NONE;		/* other device interrupting or irq switched off */
-
-	spin_lock_irqsave(&card->hysdn_lock, flags); /* no further irqs allowed */
-
-	if (!(bytein(card->iobase + PCI9050_INTR_REG) & PCI9050_INTR_REG_STAT1)) {
-		spin_unlock_irqrestore(&card->hysdn_lock, flags);	/* restore old state */
-		return IRQ_NONE;		/* no interrupt requested by E1 */
-	}
-	/* clear any pending ints on the board */
-	dpr = card->dpram;
-	b = dpr->ToPcInt;	/* clear for ergo */
-	b |= dpr->ToPcIntMetro;	/* same for metro */
-	b |= dpr->ToHyInt;	/* and for champ */
-
-	/* start kernel task immediately after leaving all interrupts */
-	if (!card->hw_lock)
-		schedule_work(&card->irq_queue);
-	spin_unlock_irqrestore(&card->hysdn_lock, flags);
-	return IRQ_HANDLED;
-}				/* ergo_interrupt */
-
-/******************************************************************************/
-/* ergo_irq_bh will be called as part of the kernel clearing its shared work  */
-/* queue sometime after a call to schedule_work has been made passing our     */
-/* work_struct. This task is the only one handling data transfer from or to   */
-/* the card after booting. The task may be queued from everywhere             */
-/* (interrupts included).                                                     */
-/******************************************************************************/
-static void
-ergo_irq_bh(struct work_struct *ugli_api)
-{
-	hysdn_card *card = container_of(ugli_api, hysdn_card, irq_queue);
-	tErgDpram *dpr;
-	int again;
-	unsigned long flags;
-
-	if (card->state != CARD_STATE_RUN)
-		return;		/* invalid call */
-
-	dpr = card->dpram;	/* point to DPRAM */
-
-	spin_lock_irqsave(&card->hysdn_lock, flags);
-	if (card->hw_lock) {
-		spin_unlock_irqrestore(&card->hysdn_lock, flags);	/* hardware currently unavailable */
-		return;
-	}
-	card->hw_lock = 1;	/* we now lock the hardware */
-
-	do {
-		again = 0;	/* assume loop not to be repeated */
-
-		if (!dpr->ToHyFlag) {
-			/* we are able to send a buffer */
-
-			if (hysdn_sched_tx(card, dpr->ToHyBuf, &dpr->ToHySize, &dpr->ToHyChannel,
-					   ERG_TO_HY_BUF_SIZE)) {
-				dpr->ToHyFlag = 1;	/* enable tx */
-				again = 1;	/* restart loop */
-			}
-		}		/* we are able to send a buffer */
-		if (dpr->ToPcFlag) {
-			/* a message has arrived for us, handle it */
-
-			if (hysdn_sched_rx(card, dpr->ToPcBuf, dpr->ToPcSize, dpr->ToPcChannel)) {
-				dpr->ToPcFlag = 0;	/* we worked the data */
-				again = 1;	/* restart loop */
-			}
-		}		/* a message has arrived for us */
-		if (again) {
-			dpr->ToHyInt = 1;
-			dpr->ToPcInt = 1;	/* interrupt to E1 for all cards */
-		} else
-			card->hw_lock = 0;	/* free hardware again */
-	} while (again);	/* until nothing more to do */
-
-	spin_unlock_irqrestore(&card->hysdn_lock, flags);
-}				/* ergo_irq_bh */
-
-
-/*********************************************************/
-/* stop the card (hardware reset) and disable interrupts */
-/*********************************************************/
-static void
-ergo_stopcard(hysdn_card *card)
-{
-	unsigned long flags;
-	unsigned char val;
-
-	hysdn_net_release(card);	/* first release the net device if existing */
-#ifdef CONFIG_HYSDN_CAPI
-	hycapi_capi_stop(card);
-#endif /* CONFIG_HYSDN_CAPI */
-	spin_lock_irqsave(&card->hysdn_lock, flags);
-	val = bytein(card->iobase + PCI9050_INTR_REG);	/* get actual value */
-	val &= ~(PCI9050_INTR_REG_ENPCI | PCI9050_INTR_REG_EN1);	/* mask irq */
-	byteout(card->iobase + PCI9050_INTR_REG, val);
-	card->irq_enabled = 0;
-	byteout(card->iobase + PCI9050_USER_IO, PCI9050_E1_RESET);	/* reset E1 processor */
-	card->state = CARD_STATE_UNUSED;
-	card->err_log_state = ERRLOG_STATE_OFF;		/* currently no log active */
-
-	spin_unlock_irqrestore(&card->hysdn_lock, flags);
-}				/* ergo_stopcard */
-
-/**************************************************************************/
-/* enable or disable the cards error log. The event is queued if possible */
-/**************************************************************************/
-static void
-ergo_set_errlog_state(hysdn_card *card, int on)
-{
-	unsigned long flags;
-
-	if (card->state != CARD_STATE_RUN) {
-		card->err_log_state = ERRLOG_STATE_OFF;		/* must be off */
-		return;
-	}
-	spin_lock_irqsave(&card->hysdn_lock, flags);
-
-	if (((card->err_log_state == ERRLOG_STATE_OFF) && !on) ||
-	    ((card->err_log_state == ERRLOG_STATE_ON) && on)) {
-		spin_unlock_irqrestore(&card->hysdn_lock, flags);
-		return;		/* nothing to do */
-	}
-	if (on)
-		card->err_log_state = ERRLOG_STATE_START;	/* request start */
-	else
-		card->err_log_state = ERRLOG_STATE_STOP;	/* request stop */
-
-	spin_unlock_irqrestore(&card->hysdn_lock, flags);
-	schedule_work(&card->irq_queue);
-}				/* ergo_set_errlog_state */
-
-/******************************************/
-/* test the cards RAM and return 0 if ok. */
-/******************************************/
-static const char TestText[36] = "This Message is filler, why read it";
-
-static int
-ergo_testram(hysdn_card *card)
-{
-	tErgDpram *dpr = card->dpram;
-
-	memset(dpr->TrapTable, 0, sizeof(dpr->TrapTable));	/* clear all Traps */
-	dpr->ToHyInt = 1;	/* E1 INTR state forced */
-
-	memcpy(&dpr->ToHyBuf[ERG_TO_HY_BUF_SIZE - sizeof(TestText)], TestText,
-	       sizeof(TestText));
-	if (memcmp(&dpr->ToHyBuf[ERG_TO_HY_BUF_SIZE - sizeof(TestText)], TestText,
-		   sizeof(TestText)))
-		return (-1);
-
-	memcpy(&dpr->ToPcBuf[ERG_TO_PC_BUF_SIZE - sizeof(TestText)], TestText,
-	       sizeof(TestText));
-	if (memcmp(&dpr->ToPcBuf[ERG_TO_PC_BUF_SIZE - sizeof(TestText)], TestText,
-		   sizeof(TestText)))
-		return (-1);
-
-	return (0);
-}				/* ergo_testram */
-
-/*****************************************************************************/
-/* this function is intended to write stage 1 boot image to the cards buffer */
-/* this is done in two steps. First the 1024 hi-words are written (offs=0),  */
-/* then the 1024 lo-bytes are written. The remaining DPRAM is cleared, the   */
-/* PCI-write-buffers flushed and the card is taken out of reset.             */
-/* The function then waits for a reaction of the E1 processor or a timeout.  */
-/* Negative return values are interpreted as errors.                         */
-/*****************************************************************************/
-static int
-ergo_writebootimg(struct HYSDN_CARD *card, unsigned char *buf,
-		  unsigned long offs)
-{
-	unsigned char *dst;
-	tErgDpram *dpram;
-	int cnt = (BOOT_IMG_SIZE >> 2);		/* number of words to move and swap (byte order!) */
-
-	if (card->debug_flags & LOG_POF_CARD)
-		hysdn_addlog(card, "ERGO: write bootldr offs=0x%lx ", offs);
-
-	dst = card->dpram;	/* pointer to start of DPRAM */
-	dst += (offs + ERG_DPRAM_FILL_SIZE);	/* offset in the DPRAM */
-	while (cnt--) {
-		*dst++ = *(buf + 1);	/* high byte */
-		*dst++ = *buf;	/* low byte */
-		dst += 2;	/* point to next longword */
-		buf += 2;	/* buffer only filled with words */
-	}
-
-	/* if low words (offs = 2) have been written, clear the rest of the DPRAM, */
-	/* flush the PCI-write-buffer and take the E1 out of reset */
-	if (offs) {
-		memset(card->dpram, 0, ERG_DPRAM_FILL_SIZE);	/* fill the DPRAM still not cleared */
-		dpram = card->dpram;	/* get pointer to dpram structure */
-		dpram->ToHyNoDpramErrLog = 0xFF;	/* write a dpram register */
-		while (!dpram->ToHyNoDpramErrLog);	/* reread volatile register to flush PCI */
-
-		byteout(card->iobase + PCI9050_USER_IO, PCI9050_E1_RUN);	/* start E1 processor */
-		/* the interrupts are still masked */
-
-		msleep_interruptible(20);		/* Timeout 20ms */
-
-		if (((tDpramBootSpooler *) card->dpram)->Len != DPRAM_SPOOLER_DATA_SIZE) {
-			if (card->debug_flags & LOG_POF_CARD)
-				hysdn_addlog(card, "ERGO: write bootldr no answer");
-			return (-ERR_BOOTIMG_FAIL);
-		}
-	}			/* start_boot_img */
-	return (0);		/* successful */
-}				/* ergo_writebootimg */
-
-/********************************************************************************/
-/* ergo_writebootseq writes the buffer containing len bytes to the E1 processor */
-/* using the boot spool mechanism. If everything works fine 0 is returned. In   */
-/* case of errors a negative error value is returned.                           */
-/********************************************************************************/
-static int
-ergo_writebootseq(struct HYSDN_CARD *card, unsigned char *buf, int len)
-{
-	tDpramBootSpooler *sp = (tDpramBootSpooler *) card->dpram;
-	unsigned char *dst;
-	unsigned char buflen;
-	int nr_write;
-	unsigned char tmp_rdptr;
-	unsigned char wr_mirror;
-	int i;
-
-	if (card->debug_flags & LOG_POF_CARD)
-		hysdn_addlog(card, "ERGO: write boot seq len=%d ", len);
-
-	dst = sp->Data;		/* point to data in spool structure */
-	buflen = sp->Len;	/* maximum len of spooled data */
-	wr_mirror = sp->WrPtr;	/* only once read */
-
-	/* try until all bytes written or error */
-	i = 0x1000;		/* timeout value */
-	while (len) {
-
-		/* first determine the number of bytes that may be buffered */
-		do {
-			tmp_rdptr = sp->RdPtr;	/* first read the pointer */
-			i--;	/* decrement timeout */
-		} while (i && (tmp_rdptr != sp->RdPtr));	/* wait for stable pointer */
-
-		if (!i) {
-			if (card->debug_flags & LOG_POF_CARD)
-				hysdn_addlog(card, "ERGO: write boot seq timeout");
-			return (-ERR_BOOTSEQ_FAIL);	/* value not stable -> timeout */
-		}
-		if ((nr_write = tmp_rdptr - wr_mirror - 1) < 0)
-			nr_write += buflen;	/* now we got number of free bytes - 1 in buffer */
-
-		if (!nr_write)
-			continue;	/* no free bytes in buffer */
-
-		if (nr_write > len)
-			nr_write = len;		/* limit if last few bytes */
-		i = 0x1000;	/* reset timeout value */
-
-		/* now we know how much bytes we may put in the puffer */
-		len -= nr_write;	/* we savely could adjust len before output */
-		while (nr_write--) {
-			*(dst + wr_mirror) = *buf++;	/* output one byte */
-			if (++wr_mirror >= buflen)
-				wr_mirror = 0;
-			sp->WrPtr = wr_mirror;	/* announce the next byte to E1 */
-		}		/* while (nr_write) */
-
-	}			/* while (len) */
-	return (0);
-}				/* ergo_writebootseq */
-
-/***********************************************************************************/
-/* ergo_waitpofready waits for a maximum of 10 seconds for the completition of the */
-/* boot process. If the process has been successful 0 is returned otherwise a     */
-/* negative error code is returned.                                                */
-/***********************************************************************************/
-static int
-ergo_waitpofready(struct HYSDN_CARD *card)
-{
-	tErgDpram *dpr = card->dpram;	/* pointer to DPRAM structure */
-	int timecnt = 10000 / 50;	/* timeout is 10 secs max. */
-	unsigned long flags;
-	int msg_size;
-	int i;
-
-	if (card->debug_flags & LOG_POF_CARD)
-		hysdn_addlog(card, "ERGO: waiting for pof ready");
-	while (timecnt--) {
-		/* wait until timeout  */
-
-		if (dpr->ToPcFlag) {
-			/* data has arrived */
-
-			if ((dpr->ToPcChannel != CHAN_SYSTEM) ||
-			    (dpr->ToPcSize < MIN_RDY_MSG_SIZE) ||
-			    (dpr->ToPcSize > MAX_RDY_MSG_SIZE) ||
-			    ((*(unsigned long *) dpr->ToPcBuf) != RDY_MAGIC))
-				break;	/* an error occurred */
-
-			/* Check for additional data delivered during SysReady */
-			msg_size = dpr->ToPcSize - RDY_MAGIC_SIZE;
-			if (msg_size > 0)
-				if (EvalSysrTokData(card, dpr->ToPcBuf + RDY_MAGIC_SIZE, msg_size))
-					break;
-
-			if (card->debug_flags & LOG_POF_RECORD)
-				hysdn_addlog(card, "ERGO: pof boot success");
-			spin_lock_irqsave(&card->hysdn_lock, flags);
-
-			card->state = CARD_STATE_RUN;	/* now card is running */
-			/* enable the cards interrupt */
-			byteout(card->iobase + PCI9050_INTR_REG,
-				bytein(card->iobase + PCI9050_INTR_REG) |
-				(PCI9050_INTR_REG_ENPCI | PCI9050_INTR_REG_EN1));
-			card->irq_enabled = 1;	/* we are ready to receive interrupts */
-
-			dpr->ToPcFlag = 0;	/* reset data indicator */
-			dpr->ToHyInt = 1;
-			dpr->ToPcInt = 1;	/* interrupt to E1 for all cards */
-
-			spin_unlock_irqrestore(&card->hysdn_lock, flags);
-			if ((hynet_enable & (1 << card->myid))
-			    && (i = hysdn_net_create(card)))
-			{
-				ergo_stopcard(card);
-				card->state = CARD_STATE_BOOTERR;
-				return (i);
-			}
-#ifdef CONFIG_HYSDN_CAPI
-			if ((i = hycapi_capi_create(card))) {
-				printk(KERN_WARNING "HYSDN: failed to create capi-interface.\n");
-			}
-#endif /* CONFIG_HYSDN_CAPI */
-			return (0);	/* success */
-		}		/* data has arrived */
-		msleep_interruptible(50);		/* Timeout 50ms */
-	}			/* wait until timeout */
-
-	if (card->debug_flags & LOG_POF_CARD)
-		hysdn_addlog(card, "ERGO: pof boot ready timeout");
-	return (-ERR_POF_TIMEOUT);
-}				/* ergo_waitpofready */
-
-
-
-/************************************************************************************/
-/* release the cards hardware. Before releasing do a interrupt disable and hardware */
-/* reset. Also unmap dpram.                                                         */
-/* Use only during module release.                                                  */
-/************************************************************************************/
-static void
-ergo_releasehardware(hysdn_card *card)
-{
-	ergo_stopcard(card);	/* first stop the card if not already done */
-	free_irq(card->irq, card);	/* release interrupt */
-	release_region(card->iobase + PCI9050_INTR_REG, 1);	/* release all io ports */
-	release_region(card->iobase + PCI9050_USER_IO, 1);
-	iounmap(card->dpram);
-	card->dpram = NULL;	/* release shared mem */
-}				/* ergo_releasehardware */
-
-
-/*********************************************************************************/
-/* acquire the needed hardware ports and map dpram. If an error occurs a nonzero */
-/* value is returned.                                                            */
-/* Use only during module init.                                                  */
-/*********************************************************************************/
-int
-ergo_inithardware(hysdn_card *card)
-{
-	if (!request_region(card->iobase + PCI9050_INTR_REG, 1, "HYSDN"))
-		return (-1);
-	if (!request_region(card->iobase + PCI9050_USER_IO, 1, "HYSDN")) {
-		release_region(card->iobase + PCI9050_INTR_REG, 1);
-		return (-1);	/* ports already in use */
-	}
-	card->memend = card->membase + ERG_DPRAM_PAGE_SIZE - 1;
-	if (!(card->dpram = ioremap(card->membase, ERG_DPRAM_PAGE_SIZE))) {
-		release_region(card->iobase + PCI9050_INTR_REG, 1);
-		release_region(card->iobase + PCI9050_USER_IO, 1);
-		return (-1);
-	}
-
-	ergo_stopcard(card);	/* disable interrupts */
-	if (request_irq(card->irq, ergo_interrupt, IRQF_SHARED, "HYSDN", card)) {
-		ergo_releasehardware(card); /* return the acquired hardware */
-		return (-1);
-	}
-	/* success, now setup the function pointers */
-	card->stopcard = ergo_stopcard;
-	card->releasehardware = ergo_releasehardware;
-	card->testram = ergo_testram;
-	card->writebootimg = ergo_writebootimg;
-	card->writebootseq = ergo_writebootseq;
-	card->waitpofready = ergo_waitpofready;
-	card->set_errlog_state = ergo_set_errlog_state;
-	INIT_WORK(&card->irq_queue, ergo_irq_bh);
-	spin_lock_init(&card->hysdn_lock);
-
-	return (0);
-}				/* ergo_inithardware */
diff --git a/drivers/staging/isdn/hysdn/boardergo.h b/drivers/staging/isdn/hysdn/boardergo.h
deleted file mode 100644
index e99bd81c4034..000000000000
--- a/drivers/staging/isdn/hysdn/boardergo.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/* $Id: boardergo.h,v 1.2.6.1 2001/09/23 22:24:54 kai Exp $
- *
- * Linux driver for HYSDN cards, definitions for ergo type boards (buffers..).
- *
- * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
- * Copyright 1999 by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-
-/************************************************/
-/* defines for the dual port memory of the card */
-/************************************************/
-#define ERG_DPRAM_PAGE_SIZE 0x2000	/* DPRAM occupies a 8K page */
-#define BOOT_IMG_SIZE 4096
-#define ERG_DPRAM_FILL_SIZE (ERG_DPRAM_PAGE_SIZE - BOOT_IMG_SIZE)
-
-#define ERG_TO_HY_BUF_SIZE  0x0E00	/* 3072 bytes buffer size to card */
-#define ERG_TO_PC_BUF_SIZE  0x0E00	/* 3072 bytes to PC, too */
-
-/* following DPRAM layout copied from OS2-driver boarderg.h */
-typedef struct ErgDpram_tag {
-	/*0000 */ unsigned char ToHyBuf[ERG_TO_HY_BUF_SIZE];
-	/*0E00 */ unsigned char ToPcBuf[ERG_TO_PC_BUF_SIZE];
-
-	/*1C00 */ unsigned char bSoftUart[SIZE_RSV_SOFT_UART];
-	/* size 0x1B0 */
-
-	/*1DB0 *//* tErrLogEntry */ unsigned char volatile ErrLogMsg[64];
-	/* size 64 bytes */
-	/*1DB0  unsigned long ulErrType;               */
-	/*1DB4  unsigned long ulErrSubtype;            */
-	/*1DB8  unsigned long ucTextSize;              */
-	/*1DB9  unsigned long ucText[ERRLOG_TEXT_SIZE]; *//* ASCIIZ of len ucTextSize-1 */
-	/*1DF0 */
-
-	/*1DF0 */ unsigned short volatile ToHyChannel;
-	/*1DF2 */ unsigned short volatile ToHySize;
-	/*1DF4 */ unsigned char volatile ToHyFlag;
-	/* !=0: msg for Hy waiting */
-	/*1DF5 */ unsigned char volatile ToPcFlag;
-	/* !=0: msg for PC waiting */
-	/*1DF6 */ unsigned short volatile ToPcChannel;
-	/*1DF8 */ unsigned short volatile ToPcSize;
-	/*1DFA */ unsigned char bRes1DBA[0x1E00 - 0x1DFA];
-	/* 6 bytes */
-
-	/*1E00 */ unsigned char bRestOfEntryTbl[0x1F00 - 0x1E00];
-	/*1F00 */ unsigned long TrapTable[62];
-	/*1FF8 */ unsigned char bRes1FF8[0x1FFB - 0x1FF8];
-	/* low part of reset vetor */
-	/*1FFB */ unsigned char ToPcIntMetro;
-	/* notes:
-	 * - metro has 32-bit boot ram - accessing
-	 *   ToPcInt and ToHyInt would be the same;
-	 *   so we moved ToPcInt to 1FFB.
-	 *   Because on the PC side both vars are
-	 *   readonly (reseting on int from E1 to PC),
-	 *   we can read both vars on both cards
-	 *   without destroying anything.
-	 * - 1FFB is the high byte of the reset vector,
-	 *   so E1 side should NOT change this byte
-	 *   when writing!
-	 */
-	/*1FFC */ unsigned char volatile ToHyNoDpramErrLog;
-	/* note: ToHyNoDpramErrLog is used to inform
-	 *       boot loader, not to use DPRAM based
-	 *       ErrLog; when DOS driver is rewritten
-	 *       this becomes obsolete
-	 */
-	/*1FFD */ unsigned char bRes1FFD;
-	/*1FFE */ unsigned char ToPcInt;
-	/* E1_intclear; on CHAMP2: E1_intset   */
-	/*1FFF */ unsigned char ToHyInt;
-	/* E1_intset;   on CHAMP2: E1_intclear */
-} tErgDpram;
-
-/**********************************************/
-/* PCI9050 controller local register offsets: */
-/* copied from boarderg.c                     */
-/**********************************************/
-#define PCI9050_INTR_REG    0x4C	/* Interrupt register */
-#define PCI9050_USER_IO     0x51	/* User I/O  register */
-
-/* bitmask for PCI9050_INTR_REG: */
-#define PCI9050_INTR_REG_EN1    0x01	/* 1= enable (def.), 0= disable */
-#define PCI9050_INTR_REG_POL1   0x02	/* 1= active high (def.), 0= active low */
-#define PCI9050_INTR_REG_STAT1  0x04	/* 1= intr. active, 0= intr. not active (def.) */
-#define PCI9050_INTR_REG_ENPCI  0x40	/* 1= PCI interrupts enable (def.) */
-
-/* bitmask for PCI9050_USER_IO: */
-#define PCI9050_USER_IO_EN3     0x02	/* 1= disable      , 0= enable (def.) */
-#define PCI9050_USER_IO_DIR3    0x04	/* 1= output (def.), 0= input         */
-#define PCI9050_USER_IO_DAT3    0x08	/* 1= high (def.)  , 0= low           */
-
-#define PCI9050_E1_RESET    (PCI9050_USER_IO_DIR3)		/* 0x04 */
-#define PCI9050_E1_RUN      (PCI9050_USER_IO_DAT3 | PCI9050_USER_IO_DIR3)		/* 0x0C */
diff --git a/drivers/staging/isdn/hysdn/hycapi.c b/drivers/staging/isdn/hysdn/hycapi.c
deleted file mode 100644
index a2c15cd7bf67..000000000000
--- a/drivers/staging/isdn/hysdn/hycapi.c
+++ /dev/null
@@ -1,785 +0,0 @@
-/* $Id: hycapi.c,v 1.8.6.4 2001/09/23 22:24:54 kai Exp $
- *
- * Linux driver for HYSDN cards, CAPI2.0-Interface.
- *
- * Author    Ulrich Albrecht <u.albrecht@hypercope.de> for Hypercope GmbH
- * Copyright 2000 by Hypercope GmbH
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/module.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/signal.h>
-#include <linux/kernel.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/slab.h>
-
-#define	VER_DRIVER	0
-#define	VER_CARDTYPE	1
-#define	VER_HWID	2
-#define	VER_SERIAL	3
-#define	VER_OPTION	4
-#define	VER_PROTO	5
-#define	VER_PROFILE	6
-#define	VER_CAPI	7
-
-#include "hysdn_defs.h"
-#include <linux/kernelcapi.h>
-
-static char hycapi_revision[] = "$Revision: 1.8.6.4 $";
-
-unsigned int hycapi_enable = 0xffffffff;
-module_param(hycapi_enable, uint, 0);
-
-typedef struct _hycapi_appl {
-	unsigned int ctrl_mask;
-	capi_register_params rp;
-	struct sk_buff *listen_req[CAPI_MAXCONTR];
-} hycapi_appl;
-
-static hycapi_appl hycapi_applications[CAPI_MAXAPPL];
-
-static u16 hycapi_send_message(struct capi_ctr *ctrl, struct sk_buff *skb);
-
-static inline int _hycapi_appCheck(int app_id, int ctrl_no)
-{
-	if ((ctrl_no <= 0) || (ctrl_no > CAPI_MAXCONTR) || (app_id <= 0) ||
-	   (app_id > CAPI_MAXAPPL))
-	{
-		printk(KERN_ERR "HYCAPI: Invalid request app_id %d for controller %d", app_id, ctrl_no);
-		return -1;
-	}
-	return ((hycapi_applications[app_id - 1].ctrl_mask & (1 << (ctrl_no-1))) != 0);
-}
-
-/******************************
-Kernel-Capi callback reset_ctr
-******************************/
-
-static void
-hycapi_reset_ctr(struct capi_ctr *ctrl)
-{
-	hycapictrl_info *cinfo = ctrl->driverdata;
-
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_NOTICE "HYCAPI hycapi_reset_ctr\n");
-#endif
-	capilib_release(&cinfo->ncci_head);
-	capi_ctr_down(ctrl);
-}
-
-/******************************
-Kernel-Capi callback remove_ctr
-******************************/
-
-static void
-hycapi_remove_ctr(struct capi_ctr *ctrl)
-{
-	int i;
-	hycapictrl_info *cinfo = NULL;
-	hysdn_card *card = NULL;
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_NOTICE "HYCAPI hycapi_remove_ctr\n");
-#endif
-	cinfo = (hycapictrl_info *)(ctrl->driverdata);
-	if (!cinfo) {
-		printk(KERN_ERR "No hycapictrl_info set!");
-		return;
-	}
-	card = cinfo->card;
-	capi_ctr_suspend_output(ctrl);
-	for (i = 0; i < CAPI_MAXAPPL; i++) {
-		if (hycapi_applications[i].listen_req[ctrl->cnr - 1]) {
-			kfree_skb(hycapi_applications[i].listen_req[ctrl->cnr - 1]);
-			hycapi_applications[i].listen_req[ctrl->cnr - 1] = NULL;
-		}
-	}
-	detach_capi_ctr(ctrl);
-	ctrl->driverdata = NULL;
-	kfree(card->hyctrlinfo);
-
-
-	card->hyctrlinfo = NULL;
-}
-
-/***********************************************************
-
-Queue a CAPI-message to the controller.
-
-***********************************************************/
-
-static void
-hycapi_sendmsg_internal(struct capi_ctr *ctrl, struct sk_buff *skb)
-{
-	hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata);
-	hysdn_card *card = cinfo->card;
-
-	spin_lock_irq(&cinfo->lock);
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_NOTICE "hycapi_send_message\n");
-#endif
-	cinfo->skbs[cinfo->in_idx++] = skb;	/* add to buffer list */
-	if (cinfo->in_idx >= HYSDN_MAX_CAPI_SKB)
-		cinfo->in_idx = 0;	/* wrap around */
-	cinfo->sk_count++;		/* adjust counter */
-	if (cinfo->sk_count >= HYSDN_MAX_CAPI_SKB) {
-		/* inform upper layers we're full */
-		printk(KERN_ERR "HYSDN Card%d: CAPI-buffer overrun!\n",
-		       card->myid);
-		capi_ctr_suspend_output(ctrl);
-	}
-	cinfo->tx_skb = skb;
-	spin_unlock_irq(&cinfo->lock);
-	schedule_work(&card->irq_queue);
-}
-
-/***********************************************************
-hycapi_register_internal
-
-Send down the CAPI_REGISTER-Command to the controller.
-This functions will also be used if the adapter has been rebooted to
-re-register any applications in the private list.
-
-************************************************************/
-
-static void
-hycapi_register_internal(struct capi_ctr *ctrl, __u16 appl,
-			 capi_register_params *rp)
-{
-	char ExtFeatureDefaults[] = "49  /0/0/0/0,*/1,*/2,*/3,*/4,*/5,*/6,*/7,*/8,*/9,*";
-	hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata);
-	hysdn_card *card = cinfo->card;
-	struct sk_buff *skb;
-	__u16 len;
-	__u8 _command = 0xa0, _subcommand = 0x80;
-	__u16 MessageNumber = 0x0000;
-	__u16 MessageBufferSize = 0;
-	int slen = strlen(ExtFeatureDefaults);
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_NOTICE "hycapi_register_appl\n");
-#endif
-	MessageBufferSize = rp->level3cnt * rp->datablkcnt * rp->datablklen;
-
-	len = CAPI_MSG_BASELEN + 8 + slen + 1;
-	if (!(skb = alloc_skb(len, GFP_ATOMIC))) {
-		printk(KERN_ERR "HYSDN card%d: memory squeeze in hycapi_register_appl\n",
-		       card->myid);
-		return;
-	}
-	skb_put_data(skb, &len, sizeof(__u16));
-	skb_put_data(skb, &appl, sizeof(__u16));
-	skb_put_data(skb, &_command, sizeof(__u8));
-	skb_put_data(skb, &_subcommand, sizeof(__u8));
-	skb_put_data(skb, &MessageNumber, sizeof(__u16));
-	skb_put_data(skb, &MessageBufferSize, sizeof(__u16));
-	skb_put_data(skb, &(rp->level3cnt), sizeof(__u16));
-	skb_put_data(skb, &(rp->datablkcnt), sizeof(__u16));
-	skb_put_data(skb, &(rp->datablklen), sizeof(__u16));
-	skb_put_data(skb, ExtFeatureDefaults, slen);
-	hycapi_applications[appl - 1].ctrl_mask |= (1 << (ctrl->cnr - 1));
-	hycapi_send_message(ctrl, skb);
-}
-
-/************************************************************
-hycapi_restart_internal
-
-After an adapter has been rebootet, re-register all applications and
-send a LISTEN_REQ (if there has been such a thing )
-
-*************************************************************/
-
-static void hycapi_restart_internal(struct capi_ctr *ctrl)
-{
-	int i;
-	struct sk_buff *skb;
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_WARNING "HYSDN: hycapi_restart_internal");
-#endif
-	for (i = 0; i < CAPI_MAXAPPL; i++) {
-		if (_hycapi_appCheck(i + 1, ctrl->cnr) == 1) {
-			hycapi_register_internal(ctrl, i + 1,
-						 &hycapi_applications[i].rp);
-			if (hycapi_applications[i].listen_req[ctrl->cnr - 1]) {
-				skb = skb_copy(hycapi_applications[i].listen_req[ctrl->cnr - 1], GFP_ATOMIC);
-				hycapi_sendmsg_internal(ctrl, skb);
-			}
-		}
-	}
-}
-
-/*************************************************************
-Register an application.
-Error-checking is done for CAPI-compliance.
-
-The application is recorded in the internal list.
-*************************************************************/
-
-static void
-hycapi_register_appl(struct capi_ctr *ctrl, __u16 appl,
-		     capi_register_params *rp)
-{
-	int MaxLogicalConnections = 0, MaxBDataBlocks = 0, MaxBDataLen = 0;
-	hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata);
-	hysdn_card *card = cinfo->card;
-	int chk = _hycapi_appCheck(appl, ctrl->cnr);
-	if (chk < 0) {
-		return;
-	}
-	if (chk == 1) {
-		printk(KERN_INFO "HYSDN: apl %d already registered\n", appl);
-		return;
-	}
-	MaxBDataBlocks = rp->datablkcnt > CAPI_MAXDATAWINDOW ? CAPI_MAXDATAWINDOW : rp->datablkcnt;
-	rp->datablkcnt = MaxBDataBlocks;
-	MaxBDataLen = rp->datablklen < 1024 ? 1024 : rp->datablklen;
-	rp->datablklen = MaxBDataLen;
-
-	MaxLogicalConnections = rp->level3cnt;
-	if (MaxLogicalConnections < 0) {
-		MaxLogicalConnections = card->bchans * -MaxLogicalConnections;
-	}
-	if (MaxLogicalConnections == 0) {
-		MaxLogicalConnections = card->bchans;
-	}
-
-	rp->level3cnt = MaxLogicalConnections;
-	memcpy(&hycapi_applications[appl - 1].rp,
-	       rp, sizeof(capi_register_params));
-}
-
-/*********************************************************************
-
-hycapi_release_internal
-
-Send down a CAPI_RELEASE to the controller.
-*********************************************************************/
-
-static void hycapi_release_internal(struct capi_ctr *ctrl, __u16 appl)
-{
-	hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata);
-	hysdn_card *card = cinfo->card;
-	struct sk_buff *skb;
-	__u16 len;
-	__u8 _command = 0xa1, _subcommand = 0x80;
-	__u16 MessageNumber = 0x0000;
-
-	capilib_release_appl(&cinfo->ncci_head, appl);
-
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_NOTICE "hycapi_release_appl\n");
-#endif
-	len = CAPI_MSG_BASELEN;
-	if (!(skb = alloc_skb(len, GFP_ATOMIC))) {
-		printk(KERN_ERR "HYSDN card%d: memory squeeze in hycapi_register_appl\n",
-		       card->myid);
-		return;
-	}
-	skb_put_data(skb, &len, sizeof(__u16));
-	skb_put_data(skb, &appl, sizeof(__u16));
-	skb_put_data(skb, &_command, sizeof(__u8));
-	skb_put_data(skb, &_subcommand, sizeof(__u8));
-	skb_put_data(skb, &MessageNumber, sizeof(__u16));
-	hycapi_send_message(ctrl, skb);
-	hycapi_applications[appl - 1].ctrl_mask &= ~(1 << (ctrl->cnr - 1));
-}
-
-/******************************************************************
-hycapi_release_appl
-
-Release the application from the internal list an remove it's
-registration at controller-level
-******************************************************************/
-
-static void
-hycapi_release_appl(struct capi_ctr *ctrl, __u16 appl)
-{
-	int chk;
-
-	chk = _hycapi_appCheck(appl, ctrl->cnr);
-	if (chk < 0) {
-		printk(KERN_ERR "HYCAPI: Releasing invalid appl %d on controller %d\n", appl, ctrl->cnr);
-		return;
-	}
-	if (hycapi_applications[appl - 1].listen_req[ctrl->cnr - 1]) {
-		kfree_skb(hycapi_applications[appl - 1].listen_req[ctrl->cnr - 1]);
-		hycapi_applications[appl - 1].listen_req[ctrl->cnr - 1] = NULL;
-	}
-	if (chk == 1)
-	{
-		hycapi_release_internal(ctrl, appl);
-	}
-}
-
-
-/**************************************************************
-Kill a single controller.
-**************************************************************/
-
-int hycapi_capi_release(hysdn_card *card)
-{
-	hycapictrl_info *cinfo = card->hyctrlinfo;
-	struct capi_ctr *ctrl;
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_NOTICE "hycapi_capi_release\n");
-#endif
-	if (cinfo) {
-		ctrl = &cinfo->capi_ctrl;
-		hycapi_remove_ctr(ctrl);
-	}
-	return 0;
-}
-
-/**************************************************************
-hycapi_capi_stop
-
-Stop CAPI-Output on a card. (e.g. during reboot)
-***************************************************************/
-
-int hycapi_capi_stop(hysdn_card *card)
-{
-	hycapictrl_info *cinfo = card->hyctrlinfo;
-	struct capi_ctr *ctrl;
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_NOTICE "hycapi_capi_stop\n");
-#endif
-	if (cinfo) {
-		ctrl = &cinfo->capi_ctrl;
-/*		ctrl->suspend_output(ctrl); */
-		capi_ctr_down(ctrl);
-	}
-	return 0;
-}
-
-/***************************************************************
-hycapi_send_message
-
-Send a message to the controller.
-
-Messages are parsed for their Command/Subcommand-type, and appropriate
-action's are performed.
-
-Note that we have to muck around with a 64Bit-DATA_REQ as there are
-firmware-releases that do not check the MsgLen-Indication!
-
-***************************************************************/
-
-static u16 hycapi_send_message(struct capi_ctr *ctrl, struct sk_buff *skb)
-{
-	__u16 appl_id;
-	int _len, _len2;
-	__u8 msghead[64];
-	hycapictrl_info *cinfo = ctrl->driverdata;
-	u16 retval = CAPI_NOERROR;
-
-	appl_id = CAPIMSG_APPID(skb->data);
-	switch (_hycapi_appCheck(appl_id, ctrl->cnr))
-	{
-	case 0:
-/*			printk(KERN_INFO "Need to register\n"); */
-		hycapi_register_internal(ctrl,
-					 appl_id,
-					 &(hycapi_applications[appl_id - 1].rp));
-		break;
-	case 1:
-		break;
-	default:
-		printk(KERN_ERR "HYCAPI: Controller mixup!\n");
-		retval = CAPI_ILLAPPNR;
-		goto out;
-	}
-	switch (CAPIMSG_CMD(skb->data)) {
-	case CAPI_DISCONNECT_B3_RESP:
-		capilib_free_ncci(&cinfo->ncci_head, appl_id,
-				  CAPIMSG_NCCI(skb->data));
-		break;
-	case CAPI_DATA_B3_REQ:
-		_len = CAPIMSG_LEN(skb->data);
-		if (_len > 22) {
-			_len2 = _len - 22;
-			skb_copy_from_linear_data(skb, msghead, 22);
-			skb_copy_to_linear_data_offset(skb, _len2,
-						       msghead, 22);
-			skb_pull(skb, _len2);
-			CAPIMSG_SETLEN(skb->data, 22);
-			retval = capilib_data_b3_req(&cinfo->ncci_head,
-						     CAPIMSG_APPID(skb->data),
-						     CAPIMSG_NCCI(skb->data),
-						     CAPIMSG_MSGID(skb->data));
-		}
-		break;
-	case CAPI_LISTEN_REQ:
-		if (hycapi_applications[appl_id - 1].listen_req[ctrl->cnr - 1])
-		{
-			kfree_skb(hycapi_applications[appl_id - 1].listen_req[ctrl->cnr - 1]);
-			hycapi_applications[appl_id - 1].listen_req[ctrl->cnr - 1] = NULL;
-		}
-		if (!(hycapi_applications[appl_id  -1].listen_req[ctrl->cnr - 1] = skb_copy(skb, GFP_ATOMIC)))
-		{
-			printk(KERN_ERR "HYSDN: memory squeeze in private_listen\n");
-		}
-		break;
-	default:
-		break;
-	}
-out:
-	if (retval == CAPI_NOERROR)
-		hycapi_sendmsg_internal(ctrl, skb);
-	else
-		dev_kfree_skb_any(skb);
-
-	return retval;
-}
-
-static int hycapi_proc_show(struct seq_file *m, void *v)
-{
-	struct capi_ctr *ctrl = m->private;
-	hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata);
-	hysdn_card *card = cinfo->card;
-	char *s;
-
-	seq_printf(m, "%-16s %s\n", "name", cinfo->cardname);
-	seq_printf(m, "%-16s 0x%x\n", "io", card->iobase);
-	seq_printf(m, "%-16s %d\n", "irq", card->irq);
-
-	switch (card->brdtype) {
-	case BD_PCCARD:  s = "HYSDN Hycard"; break;
-	case BD_ERGO: s = "HYSDN Ergo2"; break;
-	case BD_METRO: s = "HYSDN Metro4"; break;
-	case BD_CHAMP2: s = "HYSDN Champ2";	break;
-	case BD_PLEXUS: s = "HYSDN Plexus30"; break;
-	default: s = "???"; break;
-	}
-	seq_printf(m, "%-16s %s\n", "type", s);
-	if ((s = cinfo->version[VER_DRIVER]) != NULL)
-		seq_printf(m, "%-16s %s\n", "ver_driver", s);
-	if ((s = cinfo->version[VER_CARDTYPE]) != NULL)
-		seq_printf(m, "%-16s %s\n", "ver_cardtype", s);
-	if ((s = cinfo->version[VER_SERIAL]) != NULL)
-		seq_printf(m, "%-16s %s\n", "ver_serial", s);
-
-	seq_printf(m, "%-16s %s\n", "cardname", cinfo->cardname);
-
-	return 0;
-}
-
-/**************************************************************
-hycapi_load_firmware
-
-This does NOT load any firmware, but the callback somehow is needed
-on capi-interface registration.
-
-**************************************************************/
-
-static int hycapi_load_firmware(struct capi_ctr *ctrl, capiloaddata *data)
-{
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_NOTICE "hycapi_load_firmware\n");
-#endif
-	return 0;
-}
-
-
-static char *hycapi_procinfo(struct capi_ctr *ctrl)
-{
-	hycapictrl_info *cinfo = (hycapictrl_info *)(ctrl->driverdata);
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_NOTICE "%s\n", __func__);
-#endif
-	if (!cinfo)
-		return "";
-	sprintf(cinfo->infobuf, "%s %s 0x%x %d %s",
-		cinfo->cardname[0] ? cinfo->cardname : "-",
-		cinfo->version[VER_DRIVER] ? cinfo->version[VER_DRIVER] : "-",
-		cinfo->card ? cinfo->card->iobase : 0x0,
-		cinfo->card ? cinfo->card->irq : 0,
-		hycapi_revision
-		);
-	return cinfo->infobuf;
-}
-
-/******************************************************************
-hycapi_rx_capipkt
-
-Receive a capi-message.
-
-All B3_DATA_IND are converted to 64K-extension compatible format.
-New nccis are created if necessary.
-*******************************************************************/
-
-void
-hycapi_rx_capipkt(hysdn_card *card, unsigned char *buf, unsigned short len)
-{
-	struct sk_buff *skb;
-	hycapictrl_info *cinfo = card->hyctrlinfo;
-	struct capi_ctr *ctrl;
-	__u16 ApplId;
-	__u16 MsgLen, info;
-	__u16 len2, CapiCmd;
-	__u32 CP64[2] = {0, 0};
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_NOTICE "hycapi_rx_capipkt\n");
-#endif
-	if (!cinfo) {
-		return;
-	}
-	ctrl = &cinfo->capi_ctrl;
-	if (len < CAPI_MSG_BASELEN) {
-		printk(KERN_ERR "HYSDN Card%d: invalid CAPI-message, length %d!\n",
-		       card->myid, len);
-		return;
-	}
-	MsgLen = CAPIMSG_LEN(buf);
-	ApplId = CAPIMSG_APPID(buf);
-	CapiCmd = CAPIMSG_CMD(buf);
-
-	if ((CapiCmd == CAPI_DATA_B3_IND) && (MsgLen < 30)) {
-		len2 = len + (30 - MsgLen);
-		if (!(skb = alloc_skb(len2, GFP_ATOMIC))) {
-			printk(KERN_ERR "HYSDN Card%d: incoming packet dropped\n",
-			       card->myid);
-			return;
-		}
-		skb_put_data(skb, buf, MsgLen);
-		skb_put_data(skb, CP64, 2 * sizeof(__u32));
-		skb_put_data(skb, buf + MsgLen, len - MsgLen);
-		CAPIMSG_SETLEN(skb->data, 30);
-	} else {
-		if (!(skb = alloc_skb(len, GFP_ATOMIC))) {
-			printk(KERN_ERR "HYSDN Card%d: incoming packet dropped\n",
-			       card->myid);
-			return;
-		}
-		skb_put_data(skb, buf, len);
-	}
-	switch (CAPIMSG_CMD(skb->data))
-	{
-	case CAPI_CONNECT_B3_CONF:
-/* Check info-field for error-indication: */
-		info = CAPIMSG_U16(skb->data, 12);
-		switch (info)
-		{
-		case 0:
-			capilib_new_ncci(&cinfo->ncci_head, ApplId, CAPIMSG_NCCI(skb->data),
-					 hycapi_applications[ApplId - 1].rp.datablkcnt);
-
-			break;
-		case 0x0001:
-			printk(KERN_ERR "HYSDN Card%d: NCPI not supported by current "
-			       "protocol. NCPI ignored.\n", card->myid);
-			break;
-		case 0x2001:
-			printk(KERN_ERR "HYSDN Card%d: Message not supported in"
-			       " current state\n", card->myid);
-			break;
-		case 0x2002:
-			printk(KERN_ERR "HYSDN Card%d: invalid PLCI\n", card->myid);
-			break;
-		case 0x2004:
-			printk(KERN_ERR "HYSDN Card%d: out of NCCI\n", card->myid);
-			break;
-		case 0x3008:
-			printk(KERN_ERR "HYSDN Card%d: NCPI not supported\n",
-			       card->myid);
-			break;
-		default:
-			printk(KERN_ERR "HYSDN Card%d: Info in CONNECT_B3_CONF: %d\n",
-			       card->myid, info);
-			break;
-		}
-		break;
-	case CAPI_CONNECT_B3_IND:
-		capilib_new_ncci(&cinfo->ncci_head, ApplId,
-				 CAPIMSG_NCCI(skb->data),
-				 hycapi_applications[ApplId - 1].rp.datablkcnt);
-		break;
-	case CAPI_DATA_B3_CONF:
-		capilib_data_b3_conf(&cinfo->ncci_head, ApplId,
-				     CAPIMSG_NCCI(skb->data),
-				     CAPIMSG_MSGID(skb->data));
-		break;
-	default:
-		break;
-	}
-	capi_ctr_handle_message(ctrl, ApplId, skb);
-}
-
-/******************************************************************
-hycapi_tx_capiack
-
-Internally acknowledge a msg sent. This will remove the msg from the
-internal queue.
-
-*******************************************************************/
-
-void hycapi_tx_capiack(hysdn_card *card)
-{
-	hycapictrl_info *cinfo = card->hyctrlinfo;
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_NOTICE "hycapi_tx_capiack\n");
-#endif
-	if (!cinfo) {
-		return;
-	}
-	spin_lock_irq(&cinfo->lock);
-	kfree_skb(cinfo->skbs[cinfo->out_idx]);		/* free skb */
-	cinfo->skbs[cinfo->out_idx++] = NULL;
-	if (cinfo->out_idx >= HYSDN_MAX_CAPI_SKB)
-		cinfo->out_idx = 0;	/* wrap around */
-
-	if (cinfo->sk_count-- == HYSDN_MAX_CAPI_SKB)	/* dec usage count */
-		capi_ctr_resume_output(&cinfo->capi_ctrl);
-	spin_unlock_irq(&cinfo->lock);
-}
-
-/***************************************************************
-hycapi_tx_capiget(hysdn_card *card)
-
-This is called when polling for messages to SEND.
-
-****************************************************************/
-
-struct sk_buff *
-hycapi_tx_capiget(hysdn_card *card)
-{
-	hycapictrl_info *cinfo = card->hyctrlinfo;
-	if (!cinfo) {
-		return (struct sk_buff *)NULL;
-	}
-	if (!cinfo->sk_count)
-		return (struct sk_buff *)NULL;	/* nothing available */
-
-	return (cinfo->skbs[cinfo->out_idx]);		/* next packet to send */
-}
-
-
-/**********************************************************
-int hycapi_init()
-
-attach the capi-driver to the kernel-capi.
-
-***********************************************************/
-
-int hycapi_init(void)
-{
-	int i;
-	for (i = 0; i < CAPI_MAXAPPL; i++) {
-		memset(&(hycapi_applications[i]), 0, sizeof(hycapi_appl));
-	}
-	return (0);
-}
-
-/**************************************************************
-hycapi_cleanup(void)
-
-detach the capi-driver to the kernel-capi. Actually this should
-free some more ressources. Do that later.
-**************************************************************/
-
-void
-hycapi_cleanup(void)
-{
-}
-
-/********************************************************************
-hycapi_capi_create(hysdn_card *card)
-
-Attach the card with its capi-ctrl.
-*********************************************************************/
-
-static void hycapi_fill_profile(hysdn_card *card)
-{
-	hycapictrl_info *cinfo = NULL;
-	struct capi_ctr *ctrl = NULL;
-	cinfo = card->hyctrlinfo;
-	if (!cinfo) return;
-	ctrl = &cinfo->capi_ctrl;
-	strcpy(ctrl->manu, "Hypercope");
-	ctrl->version.majorversion = 2;
-	ctrl->version.minorversion = 0;
-	ctrl->version.majormanuversion = 3;
-	ctrl->version.minormanuversion = 2;
-	ctrl->profile.ncontroller = card->myid;
-	ctrl->profile.nbchannel = card->bchans;
-	ctrl->profile.goptions = GLOBAL_OPTION_INTERNAL_CONTROLLER |
-		GLOBAL_OPTION_B_CHANNEL_OPERATION;
-	ctrl->profile.support1 =  B1_PROT_64KBIT_HDLC |
-		(card->faxchans ? B1_PROT_T30 : 0) |
-		B1_PROT_64KBIT_TRANSPARENT;
-	ctrl->profile.support2 = B2_PROT_ISO7776 |
-		(card->faxchans ? B2_PROT_T30 : 0) |
-		B2_PROT_TRANSPARENT;
-	ctrl->profile.support3 = B3_PROT_TRANSPARENT |
-		B3_PROT_T90NL |
-		(card->faxchans ? B3_PROT_T30 : 0) |
-		(card->faxchans ? B3_PROT_T30EXT : 0) |
-		B3_PROT_ISO8208;
-}
-
-int
-hycapi_capi_create(hysdn_card *card)
-{
-	hycapictrl_info *cinfo = NULL;
-	struct capi_ctr *ctrl = NULL;
-	int retval;
-#ifdef HYCAPI_PRINTFNAMES
-	printk(KERN_NOTICE "hycapi_capi_create\n");
-#endif
-	if ((hycapi_enable & (1 << card->myid)) == 0) {
-		return 1;
-	}
-	if (!card->hyctrlinfo) {
-		cinfo = kzalloc(sizeof(hycapictrl_info), GFP_ATOMIC);
-		if (!cinfo) {
-			printk(KERN_WARNING "HYSDN: no memory for capi-ctrl.\n");
-			return -ENOMEM;
-		}
-		card->hyctrlinfo = cinfo;
-		cinfo->card = card;
-		spin_lock_init(&cinfo->lock);
-		INIT_LIST_HEAD(&cinfo->ncci_head);
-
-		switch (card->brdtype) {
-		case BD_PCCARD:  strcpy(cinfo->cardname, "HYSDN Hycard"); break;
-		case BD_ERGO: strcpy(cinfo->cardname, "HYSDN Ergo2"); break;
-		case BD_METRO: strcpy(cinfo->cardname, "HYSDN Metro4"); break;
-		case BD_CHAMP2: strcpy(cinfo->cardname, "HYSDN Champ2"); break;
-		case BD_PLEXUS: strcpy(cinfo->cardname, "HYSDN Plexus30"); break;
-		default: strcpy(cinfo->cardname, "HYSDN ???"); break;
-		}
-
-		ctrl = &cinfo->capi_ctrl;
-		ctrl->driver_name   = "hycapi";
-		ctrl->driverdata    = cinfo;
-		ctrl->register_appl = hycapi_register_appl;
-		ctrl->release_appl  = hycapi_release_appl;
-		ctrl->send_message  = hycapi_send_message;
-		ctrl->load_firmware = hycapi_load_firmware;
-		ctrl->reset_ctr     = hycapi_reset_ctr;
-		ctrl->procinfo      = hycapi_procinfo;
-		ctrl->proc_show     = hycapi_proc_show;
-		strcpy(ctrl->name, cinfo->cardname);
-		ctrl->owner = THIS_MODULE;
-
-		retval = attach_capi_ctr(ctrl);
-		if (retval) {
-			printk(KERN_ERR "hycapi: attach controller failed.\n");
-			return -EBUSY;
-		}
-		/* fill in the blanks: */
-		hycapi_fill_profile(card);
-		capi_ctr_ready(ctrl);
-	} else {
-		/* resume output on stopped ctrl */
-		ctrl = &card->hyctrlinfo->capi_ctrl;
-		hycapi_fill_profile(card);
-		capi_ctr_ready(ctrl);
-		hycapi_restart_internal(ctrl);
-/*		ctrl->resume_output(ctrl); */
-	}
-	return 0;
-}
diff --git a/drivers/staging/isdn/hysdn/hysdn_boot.c b/drivers/staging/isdn/hysdn/hysdn_boot.c
deleted file mode 100644
index ba177c3a621b..000000000000
--- a/drivers/staging/isdn/hysdn/hysdn_boot.c
+++ /dev/null
@@ -1,400 +0,0 @@
-/* $Id: hysdn_boot.c,v 1.4.6.4 2001/09/23 22:24:54 kai Exp $
- *
- * Linux driver for HYSDN cards
- * specific routines for booting and pof handling
- *
- * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
- * Copyright 1999 by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/uaccess.h>
-
-#include "hysdn_defs.h"
-#include "hysdn_pof.h"
-
-/********************************/
-/* defines for pof read handler */
-/********************************/
-#define POF_READ_FILE_HEAD  0
-#define POF_READ_TAG_HEAD   1
-#define POF_READ_TAG_DATA   2
-
-/************************************************************/
-/* definition of boot specific data area. This data is only */
-/* needed during boot and so allocated dynamically.         */
-/************************************************************/
-struct boot_data {
-	unsigned short Cryptor;	/* for use with Decrypt function */
-	unsigned short Nrecs;	/* records remaining in file */
-	unsigned char pof_state;/* actual state of read handler */
-	unsigned char is_crypted;/* card data is crypted */
-	int BufSize;		/* actual number of bytes bufferd */
-	int last_error;		/* last occurred error */
-	unsigned short pof_recid;/* actual pof recid */
-	unsigned long pof_reclen;/* total length of pof record data */
-	unsigned long pof_recoffset;/* actual offset inside pof record */
-	union {
-		unsigned char BootBuf[BOOT_BUF_SIZE];/* buffer as byte count */
-		tPofRecHdr PofRecHdr;	/* header for actual record/chunk */
-		tPofFileHdr PofFileHdr;		/* header from POF file */
-		tPofTimeStamp PofTime;	/* time information */
-	} buf;
-};
-
-/*****************************************************/
-/*  start decryption of successive POF file chuncks.  */
-/*                                                   */
-/*  to be called at start of POF file reading,       */
-/*  before starting any decryption on any POF record. */
-/*****************************************************/
-static void
-StartDecryption(struct boot_data *boot)
-{
-	boot->Cryptor = CRYPT_STARTTERM;
-}				/* StartDecryption */
-
-
-/***************************************************************/
-/* decrypt complete BootBuf                                    */
-/* NOTE: decryption must be applied to all or none boot tags - */
-/*       to HI and LO boot loader and (all) seq tags, because  */
-/*       global Cryptor is started for whole POF.              */
-/***************************************************************/
-static void
-DecryptBuf(struct boot_data *boot, int cnt)
-{
-	unsigned char *bufp = boot->buf.BootBuf;
-
-	while (cnt--) {
-		boot->Cryptor = (boot->Cryptor >> 1) ^ ((boot->Cryptor & 1U) ? CRYPT_FEEDTERM : 0);
-		*bufp++ ^= (unsigned char)boot->Cryptor;
-	}
-}				/* DecryptBuf */
-
-/********************************************************************************/
-/* pof_handle_data executes the required actions dependent on the active record */
-/* id. If successful 0 is returned, a negative value shows an error.           */
-/********************************************************************************/
-static int
-pof_handle_data(hysdn_card *card, int datlen)
-{
-	struct boot_data *boot = card->boot;	/* pointer to boot specific data */
-	long l;
-	unsigned char *imgp;
-	int img_len;
-
-	/* handle the different record types */
-	switch (boot->pof_recid) {
-
-	case TAG_TIMESTMP:
-		if (card->debug_flags & LOG_POF_RECORD)
-			hysdn_addlog(card, "POF created %s", boot->buf.PofTime.DateTimeText);
-		break;
-
-	case TAG_CBOOTDTA:
-		DecryptBuf(boot, datlen);	/* we need to encrypt the buffer */
-		/* fall through */
-	case TAG_BOOTDTA:
-		if (card->debug_flags & LOG_POF_RECORD)
-			hysdn_addlog(card, "POF got %s len=%d offs=0x%lx",
-				     (boot->pof_recid == TAG_CBOOTDTA) ? "CBOOTDATA" : "BOOTDTA",
-				     datlen, boot->pof_recoffset);
-
-		if (boot->pof_reclen != POF_BOOT_LOADER_TOTAL_SIZE) {
-			boot->last_error = EPOF_BAD_IMG_SIZE;	/* invalid length */
-			return (boot->last_error);
-		}
-		imgp = boot->buf.BootBuf;	/* start of buffer */
-		img_len = datlen;	/* maximum length to transfer */
-
-		l = POF_BOOT_LOADER_OFF_IN_PAGE -
-			(boot->pof_recoffset & (POF_BOOT_LOADER_PAGE_SIZE - 1));
-		if (l > 0) {
-			/* buffer needs to be truncated */
-			imgp += l;	/* advance pointer */
-			img_len -= l;	/* adjust len */
-		}
-		/* at this point no special handling for data wrapping over buffer */
-		/* is necessary, because the boot image always will be adjusted to */
-		/* match a page boundary inside the buffer.                        */
-		/* The buffer for the boot image on the card is filled in 2 cycles */
-		/* first the 1024 hi-words are put in the buffer, then the low 1024 */
-		/* word are handled in the same way with different offset.         */
-
-		if (img_len > 0) {
-			/* data available for copy */
-			if ((boot->last_error =
-			     card->writebootimg(card, imgp,
-						(boot->pof_recoffset > POF_BOOT_LOADER_PAGE_SIZE) ? 2 : 0)) < 0)
-				return (boot->last_error);
-		}
-		break;	/* end of case boot image hi/lo */
-
-	case TAG_CABSDATA:
-		DecryptBuf(boot, datlen);	/* we need to encrypt the buffer */
-		/* fall through */
-	case TAG_ABSDATA:
-		if (card->debug_flags & LOG_POF_RECORD)
-			hysdn_addlog(card, "POF got %s len=%d offs=0x%lx",
-				     (boot->pof_recid == TAG_CABSDATA) ? "CABSDATA" : "ABSDATA",
-				     datlen, boot->pof_recoffset);
-
-		if ((boot->last_error = card->writebootseq(card, boot->buf.BootBuf, datlen)) < 0)
-			return (boot->last_error);	/* error writing data */
-
-		if (boot->pof_recoffset + datlen >= boot->pof_reclen)
-			return (card->waitpofready(card));	/* data completely spooled, wait for ready */
-
-		break;	/* end of case boot seq data */
-
-	default:
-		if (card->debug_flags & LOG_POF_RECORD)
-			hysdn_addlog(card, "POF got data(id=0x%lx) len=%d offs=0x%lx", boot->pof_recid,
-				     datlen, boot->pof_recoffset);
-
-		break;	/* simply skip record */
-	}			/* switch boot->pof_recid */
-
-	return (0);
-}				/* pof_handle_data */
-
-
-/******************************************************************************/
-/* pof_write_buffer is called when the buffer has been filled with the needed */
-/* number of data bytes. The number delivered is additionally supplied for    */
-/* verification. The functions handles the data and returns the needed number */
-/* of bytes for the next action. If the returned value is 0 or less an error  */
-/* occurred and booting must be aborted.                                       */
-/******************************************************************************/
-int
-pof_write_buffer(hysdn_card *card, int datlen)
-{
-	struct boot_data *boot = card->boot;	/* pointer to boot specific data */
-
-	if (!boot)
-		return (-EFAULT);	/* invalid call */
-	if (boot->last_error < 0)
-		return (boot->last_error);	/* repeated error */
-
-	if (card->debug_flags & LOG_POF_WRITE)
-		hysdn_addlog(card, "POF write: got %d bytes ", datlen);
-
-	switch (boot->pof_state) {
-	case POF_READ_FILE_HEAD:
-		if (card->debug_flags & LOG_POF_WRITE)
-			hysdn_addlog(card, "POF write: checking file header");
-
-		if (datlen != sizeof(tPofFileHdr)) {
-			boot->last_error = -EPOF_INTERNAL;
-			break;
-		}
-		if (boot->buf.PofFileHdr.Magic != TAGFILEMAGIC) {
-			boot->last_error = -EPOF_BAD_MAGIC;
-			break;
-		}
-		/* Setup the new state and vars */
-		boot->Nrecs = (unsigned short)(boot->buf.PofFileHdr.N_PofRecs);	/* limited to 65535 */
-		boot->pof_state = POF_READ_TAG_HEAD;	/* now start with single tags */
-		boot->last_error = sizeof(tPofRecHdr);	/* new length */
-		break;
-
-	case POF_READ_TAG_HEAD:
-		if (card->debug_flags & LOG_POF_WRITE)
-			hysdn_addlog(card, "POF write: checking tag header");
-
-		if (datlen != sizeof(tPofRecHdr)) {
-			boot->last_error = -EPOF_INTERNAL;
-			break;
-		}
-		boot->pof_recid = boot->buf.PofRecHdr.PofRecId;		/* actual pof recid */
-		boot->pof_reclen = boot->buf.PofRecHdr.PofRecDataLen;	/* total length */
-		boot->pof_recoffset = 0;	/* no starting offset */
-
-		if (card->debug_flags & LOG_POF_RECORD)
-			hysdn_addlog(card, "POF: got record id=0x%lx length=%ld ",
-				     boot->pof_recid, boot->pof_reclen);
-
-		boot->pof_state = POF_READ_TAG_DATA;	/* now start with tag data */
-		if (boot->pof_reclen < BOOT_BUF_SIZE)
-			boot->last_error = boot->pof_reclen;	/* limit size */
-		else
-			boot->last_error = BOOT_BUF_SIZE;	/* maximum */
-
-		if (!boot->last_error) {	/* no data inside record */
-			boot->pof_state = POF_READ_TAG_HEAD;	/* now start with single tags */
-			boot->last_error = sizeof(tPofRecHdr);	/* new length */
-		}
-		break;
-
-	case POF_READ_TAG_DATA:
-		if (card->debug_flags & LOG_POF_WRITE)
-			hysdn_addlog(card, "POF write: getting tag data");
-
-		if (datlen != boot->last_error) {
-			boot->last_error = -EPOF_INTERNAL;
-			break;
-		}
-		if ((boot->last_error = pof_handle_data(card, datlen)) < 0)
-			return (boot->last_error);	/* an error occurred */
-		boot->pof_recoffset += datlen;
-		if (boot->pof_recoffset >= boot->pof_reclen) {
-			boot->pof_state = POF_READ_TAG_HEAD;	/* now start with single tags */
-			boot->last_error = sizeof(tPofRecHdr);	/* new length */
-		} else {
-			if (boot->pof_reclen - boot->pof_recoffset < BOOT_BUF_SIZE)
-				boot->last_error = boot->pof_reclen - boot->pof_recoffset;	/* limit size */
-			else
-				boot->last_error = BOOT_BUF_SIZE;	/* maximum */
-		}
-		break;
-
-	default:
-		boot->last_error = -EPOF_INTERNAL;	/* unknown state */
-		break;
-	}			/* switch (boot->pof_state) */
-
-	return (boot->last_error);
-}				/* pof_write_buffer */
-
-
-/*******************************************************************************/
-/* pof_write_open is called when an open for boot on the cardlog device occurs. */
-/* The function returns the needed number of bytes for the next operation. If  */
-/* the returned number is less or equal 0 an error specified by this code      */
-/* occurred. Additionally the pointer to the buffer data area is set on success */
-/*******************************************************************************/
-int
-pof_write_open(hysdn_card *card, unsigned char **bufp)
-{
-	struct boot_data *boot;	/* pointer to boot specific data */
-
-	if (card->boot) {
-		if (card->debug_flags & LOG_POF_OPEN)
-			hysdn_addlog(card, "POF open: already opened for boot");
-		return (-ERR_ALREADY_BOOT);	/* boot already active */
-	}
-	/* error no mem available */
-	if (!(boot = kzalloc(sizeof(struct boot_data), GFP_KERNEL))) {
-		if (card->debug_flags & LOG_MEM_ERR)
-			hysdn_addlog(card, "POF open: unable to allocate mem");
-		return (-EFAULT);
-	}
-	card->boot = boot;
-	card->state = CARD_STATE_BOOTING;
-
-	card->stopcard(card);	/* first stop the card */
-	if (card->testram(card)) {
-		if (card->debug_flags & LOG_POF_OPEN)
-			hysdn_addlog(card, "POF open: DPRAM test failure");
-		boot->last_error = -ERR_BOARD_DPRAM;
-		card->state = CARD_STATE_BOOTERR;	/* show boot error */
-		return (boot->last_error);
-	}
-	boot->BufSize = 0;	/* Buffer is empty */
-	boot->pof_state = POF_READ_FILE_HEAD;	/* read file header */
-	StartDecryption(boot);	/* if POF File should be encrypted */
-
-	if (card->debug_flags & LOG_POF_OPEN)
-		hysdn_addlog(card, "POF open: success");
-
-	*bufp = boot->buf.BootBuf;	/* point to buffer */
-	return (sizeof(tPofFileHdr));
-}				/* pof_write_open */
-
-/********************************************************************************/
-/* pof_write_close is called when an close of boot on the cardlog device occurs. */
-/* The return value must be 0 if everything has happened as desired.            */
-/********************************************************************************/
-int
-pof_write_close(hysdn_card *card)
-{
-	struct boot_data *boot = card->boot;	/* pointer to boot specific data */
-
-	if (!boot)
-		return (-EFAULT);	/* invalid call */
-
-	card->boot = NULL;	/* no boot active */
-	kfree(boot);
-
-	if (card->state == CARD_STATE_RUN)
-		card->set_errlog_state(card, 1);	/* activate error log */
-
-	if (card->debug_flags & LOG_POF_OPEN)
-		hysdn_addlog(card, "POF close: success");
-
-	return (0);
-}				/* pof_write_close */
-
-/*********************************************************************************/
-/* EvalSysrTokData checks additional records delivered with the Sysready Message */
-/* when POF has been booted. A return value of 0 is used if no error occurred.    */
-/*********************************************************************************/
-int
-EvalSysrTokData(hysdn_card *card, unsigned char *cp, int len)
-{
-	u_char *p;
-	u_char crc;
-
-	if (card->debug_flags & LOG_POF_RECORD)
-		hysdn_addlog(card, "SysReady Token data length %d", len);
-
-	if (len < 2) {
-		hysdn_addlog(card, "SysReady Token Data to short");
-		return (1);
-	}
-	for (p = cp, crc = 0; p < (cp + len - 2); p++)
-		if ((crc & 0x80))
-			crc = (((u_char) (crc << 1)) + 1) + *p;
-		else
-			crc = ((u_char) (crc << 1)) + *p;
-	crc = ~crc;
-	if (crc != *(cp + len - 1)) {
-		hysdn_addlog(card, "SysReady Token Data invalid CRC");
-		return (1);
-	}
-	len--;			/* don't check CRC byte */
-	while (len > 0) {
-
-		if (*cp == SYSR_TOK_END)
-			return (0);	/* End of Token stream */
-
-		if (len < (*(cp + 1) + 2)) {
-			hysdn_addlog(card, "token 0x%x invalid length %d", *cp, *(cp + 1));
-			return (1);
-		}
-		switch (*cp) {
-		case SYSR_TOK_B_CHAN:	/* 1 */
-			if (*(cp + 1) != 1)
-				return (1);	/* length invalid */
-			card->bchans = *(cp + 2);
-			break;
-
-		case SYSR_TOK_FAX_CHAN:	/* 2 */
-			if (*(cp + 1) != 1)
-				return (1);	/* length invalid */
-			card->faxchans = *(cp + 2);
-			break;
-
-		case SYSR_TOK_MAC_ADDR:	/* 3 */
-			if (*(cp + 1) != 6)
-				return (1);	/* length invalid */
-			memcpy(card->mac_addr, cp + 2, 6);
-			break;
-
-		default:
-			hysdn_addlog(card, "unknown token 0x%02x length %d", *cp, *(cp + 1));
-			break;
-		}
-		len -= (*(cp + 1) + 2);		/* adjust len */
-		cp += (*(cp + 1) + 2);	/* and pointer */
-	}
-
-	hysdn_addlog(card, "no end token found");
-	return (1);
-}				/* EvalSysrTokData */
diff --git a/drivers/staging/isdn/hysdn/hysdn_defs.h b/drivers/staging/isdn/hysdn/hysdn_defs.h
deleted file mode 100644
index cdac46a21692..000000000000
--- a/drivers/staging/isdn/hysdn/hysdn_defs.h
+++ /dev/null
@@ -1,282 +0,0 @@
-/* $Id: hysdn_defs.h,v 1.5.6.3 2001/09/23 22:24:54 kai Exp $
- *
- * Linux driver for HYSDN cards
- * global definitions and exported vars and functions.
- *
- * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
- * Copyright 1999 by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#ifndef HYSDN_DEFS_H
-#define HYSDN_DEFS_H
-
-#include <linux/hysdn_if.h>
-#include <linux/interrupt.h>
-#include <linux/workqueue.h>
-#include <linux/skbuff.h>
-
-#include "ince1pc.h"
-
-#ifdef CONFIG_HYSDN_CAPI
-#include <linux/capi.h>
-#include <linux/isdn/capicmd.h>
-#include <linux/isdn/capiutil.h>
-#include <linux/isdn/capilli.h>
-
-/***************************/
-/*   CAPI-Profile values.  */
-/***************************/
-
-#define GLOBAL_OPTION_INTERNAL_CONTROLLER 0x0001
-#define GLOBAL_OPTION_EXTERNAL_CONTROLLER 0x0002
-#define GLOBAL_OPTION_HANDSET             0x0004
-#define GLOBAL_OPTION_DTMF                0x0008
-#define GLOBAL_OPTION_SUPPL_SERVICES      0x0010
-#define GLOBAL_OPTION_CHANNEL_ALLOCATION  0x0020
-#define GLOBAL_OPTION_B_CHANNEL_OPERATION 0x0040
-
-#define B1_PROT_64KBIT_HDLC        0x0001
-#define B1_PROT_64KBIT_TRANSPARENT 0x0002
-#define B1_PROT_V110_ASYNCH        0x0004
-#define B1_PROT_V110_SYNCH         0x0008
-#define B1_PROT_T30                0x0010
-#define B1_PROT_64KBIT_INV_HDLC    0x0020
-#define B1_PROT_56KBIT_TRANSPARENT 0x0040
-
-#define B2_PROT_ISO7776            0x0001
-#define B2_PROT_TRANSPARENT        0x0002
-#define B2_PROT_SDLC               0x0004
-#define B2_PROT_LAPD               0x0008
-#define B2_PROT_T30                0x0010
-#define B2_PROT_PPP                0x0020
-#define B2_PROT_TRANSPARENT_IGNORE_B1_FRAMING_ERRORS 0x0040
-
-#define B3_PROT_TRANSPARENT        0x0001
-#define B3_PROT_T90NL              0x0002
-#define B3_PROT_ISO8208            0x0004
-#define B3_PROT_X25_DCE            0x0008
-#define B3_PROT_T30                0x0010
-#define B3_PROT_T30EXT             0x0020
-
-#define HYSDN_MAXVERSION		8
-
-/* Number of sendbuffers in CAPI-queue */
-#define HYSDN_MAX_CAPI_SKB             20
-
-#endif /* CONFIG_HYSDN_CAPI*/
-
-/************************************************/
-/* constants and bits for debugging/log outputs */
-/************************************************/
-#define LOG_MAX_LINELEN 120
-#define DEB_OUT_SYSLOG  0x80000000	/* output to syslog instead of proc fs */
-#define LOG_MEM_ERR     0x00000001	/* log memory errors like kmalloc failure */
-#define LOG_POF_OPEN    0x00000010	/* log pof open and close activities */
-#define LOG_POF_RECORD  0x00000020	/* log pof record parser */
-#define LOG_POF_WRITE   0x00000040	/* log detailed pof write operation */
-#define LOG_POF_CARD    0x00000080	/* log pof related card functions */
-#define LOG_CNF_LINE    0x00000100	/* all conf lines are put to procfs */
-#define LOG_CNF_DATA    0x00000200	/* non comment conf lines are shown with channel */
-#define LOG_CNF_MISC    0x00000400	/* additional conf line debug outputs */
-#define LOG_SCHED_ASYN  0x00001000	/* debug schedulers async tx routines */
-#define LOG_PROC_OPEN   0x00100000	/* open and close from procfs are logged */
-#define LOG_PROC_ALL    0x00200000	/* all actions from procfs are logged */
-#define LOG_NET_INIT    0x00010000	/* network init and deinit logging */
-
-#define DEF_DEB_FLAGS   0x7fff000f	/* everything is logged to procfs */
-
-/**********************************/
-/* proc filesystem name constants */
-/**********************************/
-#define PROC_SUBDIR_NAME "hysdn"
-#define PROC_CONF_BASENAME "cardconf"
-#define PROC_LOG_BASENAME "cardlog"
-
-/***********************************/
-/* PCI 32 bit parms for IO and MEM */
-/***********************************/
-#define PCI_REG_PLX_MEM_BASE    0
-#define PCI_REG_PLX_IO_BASE     1
-#define PCI_REG_MEMORY_BASE     3
-
-/**************/
-/* card types */
-/**************/
-#define BD_NONE         0U
-#define BD_PERFORMANCE  1U
-#define BD_VALUE        2U
-#define BD_PCCARD       3U
-#define BD_ERGO         4U
-#define BD_METRO        5U
-#define BD_CHAMP2       6U
-#define BD_PLEXUS       7U
-
-/******************************************************/
-/* defined states for cards shown by reading cardconf */
-/******************************************************/
-#define CARD_STATE_UNUSED   0	/* never been used or booted */
-#define CARD_STATE_BOOTING  1	/* booting is in progress */
-#define CARD_STATE_BOOTERR  2	/* a previous boot was aborted */
-#define CARD_STATE_RUN      3	/* card is active */
-
-/*******************************/
-/* defines for error_log_state */
-/*******************************/
-#define ERRLOG_STATE_OFF   0	/* error log is switched off, nothing to do */
-#define ERRLOG_STATE_ON    1	/* error log is switched on, wait for data */
-#define ERRLOG_STATE_START 2	/* start error logging */
-#define ERRLOG_STATE_STOP  3	/* stop error logging */
-
-/*******************************/
-/* data structure for one card */
-/*******************************/
-typedef struct HYSDN_CARD {
-
-	/* general variables for the cards */
-	int myid;		/* own driver card id */
-	unsigned char bus;	/* pci bus the card is connected to */
-	unsigned char devfn;	/* slot+function bit encoded */
-	unsigned short subsysid;/* PCI subsystem id */
-	unsigned char brdtype;	/* type of card */
-	unsigned int bchans;	/* number of available B-channels */
-	unsigned int faxchans;	/* number of available fax-channels */
-	unsigned char mac_addr[6];/* MAC Address read from card */
-	unsigned int irq;	/* interrupt number */
-	unsigned int iobase;	/* IO-port base address */
-	unsigned long plxbase;	/* PLX memory base */
-	unsigned long membase;	/* DPRAM memory base */
-	unsigned long memend;	/* DPRAM memory end */
-	void *dpram;		/* mapped dpram */
-	int state;		/* actual state of card -> CARD_STATE_** */
-	struct HYSDN_CARD *next;	/* pointer to next card */
-
-	/* data areas for the /proc file system */
-	void *proclog;		/* pointer to proclog filesystem specific data */
-	void *procconf;		/* pointer to procconf filesystem specific data */
-
-	/* debugging and logging */
-	unsigned char err_log_state;/* actual error log state of the card */
-	unsigned long debug_flags;/* tells what should be debugged and where */
-	void (*set_errlog_state) (struct HYSDN_CARD *, int);
-
-	/* interrupt handler + interrupt synchronisation */
-	struct work_struct irq_queue;	/* interrupt task queue */
-	unsigned char volatile irq_enabled;/* interrupt enabled if != 0 */
-	unsigned char volatile hw_lock;/* hardware is currently locked -> no access */
-
-	/* boot process */
-	void *boot;		/* pointer to boot private data */
-	int (*writebootimg) (struct HYSDN_CARD *, unsigned char *, unsigned long);
-	int (*writebootseq) (struct HYSDN_CARD *, unsigned char *, int);
-	int (*waitpofready) (struct HYSDN_CARD *);
-	int (*testram) (struct HYSDN_CARD *);
-
-	/* scheduler for data transfer (only async parts) */
-	unsigned char async_data[256];/* async data to be sent (normally for config) */
-	unsigned short volatile async_len;/* length of data to sent */
-	unsigned short volatile async_channel;/* channel number for async transfer */
-	int volatile async_busy;	/* flag != 0 sending in progress */
-	int volatile net_tx_busy;	/* a network packet tx is in progress */
-
-	/* network interface */
-	void *netif;		/* pointer to network structure */
-
-	/* init and deinit stopcard for booting, too */
-	void (*stopcard) (struct HYSDN_CARD *);
-	void (*releasehardware) (struct HYSDN_CARD *);
-
-	spinlock_t hysdn_lock;
-#ifdef CONFIG_HYSDN_CAPI
-	struct hycapictrl_info {
-		char cardname[32];
-		spinlock_t lock;
-		int versionlen;
-		char versionbuf[1024];
-		char *version[HYSDN_MAXVERSION];
-
-		char infobuf[128];	/* for function procinfo */
-
-		struct HYSDN_CARD  *card;
-		struct capi_ctr capi_ctrl;
-		struct sk_buff *skbs[HYSDN_MAX_CAPI_SKB];
-		int in_idx, out_idx;	/* indexes to buffer ring */
-		int sk_count;		/* number of buffers currently in ring */
-		struct sk_buff *tx_skb;	/* buffer for tx operation */
-
-		struct list_head ncci_head;
-	} *hyctrlinfo;
-#endif /* CONFIG_HYSDN_CAPI */
-} hysdn_card;
-
-#ifdef CONFIG_HYSDN_CAPI
-typedef struct hycapictrl_info hycapictrl_info;
-#endif /* CONFIG_HYSDN_CAPI */
-
-
-/*****************/
-/* exported vars */
-/*****************/
-extern hysdn_card *card_root;	/* pointer to first card */
-
-
-
-/*************************/
-/* im/exported functions */
-/*************************/
-
-/* hysdn_procconf.c */
-extern int hysdn_procconf_init(void);	/* init proc config filesys */
-extern void hysdn_procconf_release(void);	/* deinit proc config filesys */
-
-/* hysdn_proclog.c */
-extern int hysdn_proclog_init(hysdn_card *);	/* init proc log entry */
-extern void hysdn_proclog_release(hysdn_card *);	/* deinit proc log entry */
-extern void hysdn_addlog(hysdn_card *, char *, ...);	/* output data to log */
-extern void hysdn_card_errlog(hysdn_card *, tErrLogEntry *, int);	/* output card log */
-
-/* boardergo.c */
-extern int ergo_inithardware(hysdn_card *card);	/* get hardware -> module init */
-
-/* hysdn_boot.c */
-extern int pof_write_close(hysdn_card *);	/* close proc file after writing pof */
-extern int pof_write_open(hysdn_card *, unsigned char **);	/* open proc file for writing pof */
-extern int pof_write_buffer(hysdn_card *, int);		/* write boot data to card */
-extern int EvalSysrTokData(hysdn_card *, unsigned char *, int);		/* Check Sysready Token Data */
-
-/* hysdn_sched.c */
-extern int hysdn_sched_tx(hysdn_card *, unsigned char *,
-			  unsigned short volatile *, unsigned short volatile *,
-			  unsigned short);
-extern int hysdn_sched_rx(hysdn_card *, unsigned char *, unsigned short,
-			  unsigned short);
-extern int hysdn_tx_cfgline(hysdn_card *, unsigned char *,
-			    unsigned short);	/* send one cfg line */
-
-/* hysdn_net.c */
-extern unsigned int hynet_enable;
-extern int hysdn_net_create(hysdn_card *);	/* create a new net device */
-extern int hysdn_net_release(hysdn_card *);	/* delete the device */
-extern char *hysdn_net_getname(hysdn_card *);	/* get name of net interface */
-extern void hysdn_tx_netack(hysdn_card *);	/* acknowledge a packet tx */
-extern struct sk_buff *hysdn_tx_netget(hysdn_card *);	/* get next network packet */
-extern void hysdn_rx_netpkt(hysdn_card *, unsigned char *,
-			    unsigned short);	/* rxed packet from network */
-
-#ifdef CONFIG_HYSDN_CAPI
-extern unsigned int hycapi_enable;
-extern int hycapi_capi_create(hysdn_card *);	/* create a new capi device */
-extern int hycapi_capi_release(hysdn_card *);	/* delete the device */
-extern int hycapi_capi_stop(hysdn_card *card);   /* suspend */
-extern void hycapi_rx_capipkt(hysdn_card *card, unsigned char *buf,
-			      unsigned short len);
-extern void hycapi_tx_capiack(hysdn_card *card);
-extern struct sk_buff *hycapi_tx_capiget(hysdn_card *card);
-extern int hycapi_init(void);
-extern void hycapi_cleanup(void);
-#endif /* CONFIG_HYSDN_CAPI */
-
-#endif /* HYSDN_DEFS_H */
diff --git a/drivers/staging/isdn/hysdn/hysdn_init.c b/drivers/staging/isdn/hysdn/hysdn_init.c
deleted file mode 100644
index 0db2f7506250..000000000000
--- a/drivers/staging/isdn/hysdn/hysdn_init.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/* $Id: hysdn_init.c,v 1.6.6.6 2001/09/23 22:24:54 kai Exp $
- *
- * Linux driver for HYSDN cards, init functions.
- *
- * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
- * Copyright 1999 by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-
-#include "hysdn_defs.h"
-
-static struct pci_device_id hysdn_pci_tbl[] = {
-	{ PCI_VENDOR_ID_HYPERCOPE, PCI_DEVICE_ID_HYPERCOPE_PLX,
-	  PCI_ANY_ID, PCI_SUBDEVICE_ID_HYPERCOPE_METRO, 0, 0, BD_METRO },
-	{ PCI_VENDOR_ID_HYPERCOPE, PCI_DEVICE_ID_HYPERCOPE_PLX,
-	  PCI_ANY_ID, PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2, 0, 0, BD_CHAMP2 },
-	{ PCI_VENDOR_ID_HYPERCOPE, PCI_DEVICE_ID_HYPERCOPE_PLX,
-	  PCI_ANY_ID, PCI_SUBDEVICE_ID_HYPERCOPE_ERGO, 0, 0, BD_ERGO },
-	{ PCI_VENDOR_ID_HYPERCOPE, PCI_DEVICE_ID_HYPERCOPE_PLX,
-	  PCI_ANY_ID, PCI_SUBDEVICE_ID_HYPERCOPE_OLD_ERGO, 0, 0, BD_ERGO },
-
-	{ }				/* Terminating entry */
-};
-MODULE_DEVICE_TABLE(pci, hysdn_pci_tbl);
-MODULE_DESCRIPTION("ISDN4Linux: Driver for HYSDN cards");
-MODULE_AUTHOR("Werner Cornelius");
-MODULE_LICENSE("GPL");
-
-static int cardmax;		/* number of found cards */
-hysdn_card *card_root = NULL;	/* pointer to first card */
-static hysdn_card *card_last = NULL;	/* pointer to first card */
-
-
-/****************************************************************************/
-/* The module startup and shutdown code. Only compiled when used as module. */
-/* Using the driver as module is always advisable, because the booting      */
-/* image becomes smaller and the driver code is only loaded when needed.    */
-/* Additionally newer versions may be activated without rebooting.          */
-/****************************************************************************/
-
-/****************************************************************************/
-/* init_module is called once when the module is loaded to do all necessary */
-/* things like autodetect...                                                */
-/* If the return value of this function is 0 the init has been successful   */
-/* and the module is added to the list in /proc/modules, otherwise an error */
-/* is assumed and the module will not be kept in memory.                    */
-/****************************************************************************/
-
-static int hysdn_pci_init_one(struct pci_dev *akt_pcidev,
-			      const struct pci_device_id *ent)
-{
-	hysdn_card *card;
-	int rc;
-
-	rc = pci_enable_device(akt_pcidev);
-	if (rc)
-		return rc;
-
-	if (!(card = kzalloc(sizeof(hysdn_card), GFP_KERNEL))) {
-		printk(KERN_ERR "HYSDN: unable to alloc device mem \n");
-		rc = -ENOMEM;
-		goto err_out;
-	}
-	card->myid = cardmax;	/* set own id */
-	card->bus = akt_pcidev->bus->number;
-	card->devfn = akt_pcidev->devfn;	/* slot + function */
-	card->subsysid = akt_pcidev->subsystem_device;
-	card->irq = akt_pcidev->irq;
-	card->iobase = pci_resource_start(akt_pcidev, PCI_REG_PLX_IO_BASE);
-	card->plxbase = pci_resource_start(akt_pcidev, PCI_REG_PLX_MEM_BASE);
-	card->membase = pci_resource_start(akt_pcidev, PCI_REG_MEMORY_BASE);
-	card->brdtype = BD_NONE;	/* unknown */
-	card->debug_flags = DEF_DEB_FLAGS;	/* set default debug */
-	card->faxchans = 0;	/* default no fax channels */
-	card->bchans = 2;	/* and 2 b-channels */
-	card->brdtype = ent->driver_data;
-
-	if (ergo_inithardware(card)) {
-		printk(KERN_WARNING "HYSDN: card at io 0x%04x already in use\n", card->iobase);
-		rc = -EBUSY;
-		goto err_out_card;
-	}
-
-	cardmax++;
-	card->next = NULL;	/*end of chain */
-	if (card_last)
-		card_last->next = card;		/* pointer to next card */
-	else
-		card_root = card;
-	card_last = card;	/* new chain end */
-
-	pci_set_drvdata(akt_pcidev, card);
-	return 0;
-
-err_out_card:
-	kfree(card);
-err_out:
-	pci_disable_device(akt_pcidev);
-	return rc;
-}
-
-static void hysdn_pci_remove_one(struct pci_dev *akt_pcidev)
-{
-	hysdn_card *card = pci_get_drvdata(akt_pcidev);
-
-	pci_set_drvdata(akt_pcidev, NULL);
-
-	if (card->stopcard)
-		card->stopcard(card);
-
-#ifdef CONFIG_HYSDN_CAPI
-	hycapi_capi_release(card);
-#endif
-
-	if (card->releasehardware)
-		card->releasehardware(card);   /* free all hardware resources */
-
-	if (card == card_root) {
-		card_root = card_root->next;
-		if (!card_root)
-			card_last = NULL;
-	} else {
-		hysdn_card *tmp = card_root;
-		while (tmp) {
-			if (tmp->next == card)
-				tmp->next = card->next;
-			card_last = tmp;
-			tmp = tmp->next;
-		}
-	}
-
-	kfree(card);
-	pci_disable_device(akt_pcidev);
-}
-
-static struct pci_driver hysdn_pci_driver = {
-	.name		= "hysdn",
-	.id_table	= hysdn_pci_tbl,
-	.probe		= hysdn_pci_init_one,
-	.remove		= hysdn_pci_remove_one,
-};
-
-static int hysdn_have_procfs;
-
-static int __init
-hysdn_init(void)
-{
-	int rc;
-
-	printk(KERN_NOTICE "HYSDN: module loaded\n");
-
-	rc = pci_register_driver(&hysdn_pci_driver);
-	if (rc)
-		return rc;
-
-	printk(KERN_INFO "HYSDN: %d card(s) found.\n", cardmax);
-
-	if (!hysdn_procconf_init())
-		hysdn_have_procfs = 1;
-
-#ifdef CONFIG_HYSDN_CAPI
-	if (cardmax > 0) {
-		if (hycapi_init()) {
-			printk(KERN_ERR "HYCAPI: init failed\n");
-
-			if (hysdn_have_procfs)
-				hysdn_procconf_release();
-
-			pci_unregister_driver(&hysdn_pci_driver);
-			return -ESPIPE;
-		}
-	}
-#endif /* CONFIG_HYSDN_CAPI */
-
-	return 0;		/* no error */
-}				/* init_module */
-
-
-/***********************************************************************/
-/* cleanup_module is called when the module is released by the kernel. */
-/* The routine is only called if init_module has been successful and   */
-/* the module counter has a value of 0. Otherwise this function will   */
-/* not be called. This function must release all resources still allo- */
-/* cated as after the return from this function the module code will   */
-/* be removed from memory.                                             */
-/***********************************************************************/
-static void __exit
-hysdn_exit(void)
-{
-	if (hysdn_have_procfs)
-		hysdn_procconf_release();
-
-	pci_unregister_driver(&hysdn_pci_driver);
-
-#ifdef CONFIG_HYSDN_CAPI
-	hycapi_cleanup();
-#endif /* CONFIG_HYSDN_CAPI */
-
-	printk(KERN_NOTICE "HYSDN: module unloaded\n");
-}				/* cleanup_module */
-
-module_init(hysdn_init);
-module_exit(hysdn_exit);
diff --git a/drivers/staging/isdn/hysdn/hysdn_net.c b/drivers/staging/isdn/hysdn/hysdn_net.c
deleted file mode 100644
index dcb9ef7a2651..000000000000
--- a/drivers/staging/isdn/hysdn/hysdn_net.c
+++ /dev/null
@@ -1,330 +0,0 @@
-/* $Id: hysdn_net.c,v 1.8.6.4 2001/09/23 22:24:54 kai Exp $
- *
- * Linux driver for HYSDN cards, net (ethernet type) handling routines.
- *
- * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
- * Copyright 1999 by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * This net module has been inspired by the skeleton driver from
- * Donald Becker (becker@CESDIS.gsfc.nasa.gov)
- *
- */
-
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/kernel.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/inetdevice.h>
-
-#include "hysdn_defs.h"
-
-unsigned int hynet_enable = 0xffffffff;
-module_param(hynet_enable, uint, 0);
-
-#define MAX_SKB_BUFFERS 20	/* number of buffers for keeping TX-data */
-
-/****************************************************************************/
-/* structure containing the complete network data. The structure is aligned */
-/* in a way that both, the device and statistics are kept inside it.        */
-/* for proper access, the device structure MUST be the first var/struct     */
-/* inside the definition.                                                   */
-/****************************************************************************/
-struct net_local {
-	/* Tx control lock.  This protects the transmit buffer ring
-	 * state along with the "tx full" state of the driver.  This
-	 * means all netif_queue flow control actions are protected
-	 * by this lock as well.
-	 */
-	struct net_device *dev;
-	spinlock_t lock;
-	struct sk_buff *skbs[MAX_SKB_BUFFERS];	/* pointers to tx-skbs */
-	int in_idx, out_idx;	/* indexes to buffer ring */
-	int sk_count;		/* number of buffers currently in ring */
-};				/* net_local */
-
-
-
-/*********************************************************************/
-/* Open/initialize the board. This is called (in the current kernel) */
-/* sometime after booting when the 'ifconfig' program is run.        */
-/* This routine should set everything up anew at each open, even     */
-/* registers that "should" only need to be set once at boot, so that */
-/* there is non-reboot way to recover if something goes wrong.       */
-/*********************************************************************/
-static int
-net_open(struct net_device *dev)
-{
-	struct in_device *in_dev;
-	hysdn_card *card = dev->ml_priv;
-	int i;
-
-	netif_start_queue(dev);	/* start tx-queueing */
-
-	/* Fill in the MAC-level header (if not already set) */
-	if (!card->mac_addr[0]) {
-		for (i = 0; i < ETH_ALEN; i++)
-			dev->dev_addr[i] = 0xfc;
-		if ((in_dev = dev->ip_ptr) != NULL) {
-			const struct in_ifaddr *ifa;
-
-			rcu_read_lock();
-			ifa = rcu_dereference(in_dev->ifa_list);
-			if (ifa != NULL)
-				memcpy(dev->dev_addr + (ETH_ALEN - sizeof(ifa->ifa_local)), &ifa->ifa_local, sizeof(ifa->ifa_local));
-			rcu_read_unlock();
-		}
-	} else
-		memcpy(dev->dev_addr, card->mac_addr, ETH_ALEN);
-
-	return (0);
-}				/* net_open */
-
-/*******************************************/
-/* flush the currently occupied tx-buffers */
-/* must only be called when device closed  */
-/*******************************************/
-static void
-flush_tx_buffers(struct net_local *nl)
-{
-
-	while (nl->sk_count) {
-		dev_kfree_skb(nl->skbs[nl->out_idx++]);		/* free skb */
-		if (nl->out_idx >= MAX_SKB_BUFFERS)
-			nl->out_idx = 0;	/* wrap around */
-		nl->sk_count--;
-	}
-}				/* flush_tx_buffers */
-
-
-/*********************************************************************/
-/* close/decativate the device. The device is not removed, but only  */
-/* deactivated.                                                      */
-/*********************************************************************/
-static int
-net_close(struct net_device *dev)
-{
-
-	netif_stop_queue(dev);	/* disable queueing */
-
-	flush_tx_buffers((struct net_local *) dev);
-
-	return (0);		/* success */
-}				/* net_close */
-
-/************************************/
-/* send a packet on this interface. */
-/* new style for kernel >= 2.3.33   */
-/************************************/
-static netdev_tx_t
-net_send_packet(struct sk_buff *skb, struct net_device *dev)
-{
-	struct net_local *lp = (struct net_local *) dev;
-
-	spin_lock_irq(&lp->lock);
-
-	lp->skbs[lp->in_idx++] = skb;	/* add to buffer list */
-	if (lp->in_idx >= MAX_SKB_BUFFERS)
-		lp->in_idx = 0;	/* wrap around */
-	lp->sk_count++;		/* adjust counter */
-	netif_trans_update(dev);
-
-	/* If we just used up the very last entry in the
-	 * TX ring on this device, tell the queueing
-	 * layer to send no more.
-	 */
-	if (lp->sk_count >= MAX_SKB_BUFFERS)
-		netif_stop_queue(dev);
-
-	/* When the TX completion hw interrupt arrives, this
-	 * is when the transmit statistics are updated.
-	 */
-
-	spin_unlock_irq(&lp->lock);
-
-	if (lp->sk_count <= 3) {
-		schedule_work(&((hysdn_card *) dev->ml_priv)->irq_queue);
-	}
-	return NETDEV_TX_OK;	/* success */
-}				/* net_send_packet */
-
-
-
-/***********************************************************************/
-/* acknowlegde a packet send. The network layer will be informed about */
-/* completion                                                          */
-/***********************************************************************/
-void
-hysdn_tx_netack(hysdn_card *card)
-{
-	struct net_local *lp = card->netif;
-
-	if (!lp)
-		return;		/* non existing device */
-
-
-	if (!lp->sk_count)
-		return;		/* error condition */
-
-	lp->dev->stats.tx_packets++;
-	lp->dev->stats.tx_bytes += lp->skbs[lp->out_idx]->len;
-
-	dev_kfree_skb(lp->skbs[lp->out_idx++]);		/* free skb */
-	if (lp->out_idx >= MAX_SKB_BUFFERS)
-		lp->out_idx = 0;	/* wrap around */
-
-	if (lp->sk_count-- == MAX_SKB_BUFFERS)	/* dec usage count */
-		netif_start_queue((struct net_device *) lp);
-}				/* hysdn_tx_netack */
-
-/*****************************************************/
-/* we got a packet from the network, go and queue it */
-/*****************************************************/
-void
-hysdn_rx_netpkt(hysdn_card *card, unsigned char *buf, unsigned short len)
-{
-	struct net_local *lp = card->netif;
-	struct net_device *dev;
-	struct sk_buff *skb;
-
-	if (!lp)
-		return;		/* non existing device */
-
-	dev = lp->dev;
-	dev->stats.rx_bytes += len;
-
-	skb = dev_alloc_skb(len);
-	if (skb == NULL) {
-		printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n",
-		       dev->name);
-		dev->stats.rx_dropped++;
-		return;
-	}
-	/* copy the data */
-	skb_put_data(skb, buf, len);
-
-	/* determine the used protocol */
-	skb->protocol = eth_type_trans(skb, dev);
-
-	dev->stats.rx_packets++;	/* adjust packet count */
-
-	netif_rx(skb);
-}				/* hysdn_rx_netpkt */
-
-/*****************************************************/
-/* return the pointer to a network packet to be send */
-/*****************************************************/
-struct sk_buff *
-hysdn_tx_netget(hysdn_card *card)
-{
-	struct net_local *lp = card->netif;
-
-	if (!lp)
-		return (NULL);	/* non existing device */
-
-	if (!lp->sk_count)
-		return (NULL);	/* nothing available */
-
-	return (lp->skbs[lp->out_idx]);		/* next packet to send */
-}				/* hysdn_tx_netget */
-
-static const struct net_device_ops hysdn_netdev_ops = {
-	.ndo_open		= net_open,
-	.ndo_stop		= net_close,
-	.ndo_start_xmit		= net_send_packet,
-	.ndo_set_mac_address	= eth_mac_addr,
-	.ndo_validate_addr	= eth_validate_addr,
-};
-
-
-/*****************************************************************************/
-/* hysdn_net_create creates a new net device for the given card. If a device */
-/* already exists, it will be deleted and created a new one. The return value */
-/* 0 announces success, else a negative error code will be returned.         */
-/*****************************************************************************/
-int
-hysdn_net_create(hysdn_card *card)
-{
-	struct net_device *dev;
-	int i;
-	struct net_local *lp;
-
-	if (!card) {
-		printk(KERN_WARNING "No card-pt in hysdn_net_create!\n");
-		return (-ENOMEM);
-	}
-	hysdn_net_release(card);	/* release an existing net device */
-
-	dev = alloc_etherdev(sizeof(struct net_local));
-	if (!dev) {
-		printk(KERN_WARNING "HYSDN: unable to allocate mem\n");
-		return (-ENOMEM);
-	}
-
-	lp = netdev_priv(dev);
-	lp->dev = dev;
-
-	dev->netdev_ops = &hysdn_netdev_ops;
-	spin_lock_init(&((struct net_local *) dev)->lock);
-
-	/* initialise necessary or informing fields */
-	dev->base_addr = card->iobase;	/* IO address */
-	dev->irq = card->irq;	/* irq */
-
-	dev->netdev_ops = &hysdn_netdev_ops;
-	if ((i = register_netdev(dev))) {
-		printk(KERN_WARNING "HYSDN: unable to create network device\n");
-		free_netdev(dev);
-		return (i);
-	}
-	dev->ml_priv = card;	/* remember pointer to own data structure */
-	card->netif = dev;	/* setup the local pointer */
-
-	if (card->debug_flags & LOG_NET_INIT)
-		hysdn_addlog(card, "network device created");
-	return 0;		/* and return success */
-}				/* hysdn_net_create */
-
-/***************************************************************************/
-/* hysdn_net_release deletes the net device for the given card. The return */
-/* value 0 announces success, else a negative error code will be returned. */
-/***************************************************************************/
-int
-hysdn_net_release(hysdn_card *card)
-{
-	struct net_device *dev = card->netif;
-
-	if (!dev)
-		return (0);	/* non existing */
-
-	card->netif = NULL;	/* clear out pointer */
-	net_close(dev);
-
-	flush_tx_buffers((struct net_local *) dev);	/* empty buffers */
-
-	unregister_netdev(dev);	/* release the device */
-	free_netdev(dev);	/* release the memory allocated */
-	if (card->debug_flags & LOG_NET_INIT)
-		hysdn_addlog(card, "network device deleted");
-
-	return (0);		/* always successful */
-}				/* hysdn_net_release */
-
-/*****************************************************************************/
-/* hysdn_net_getname returns a pointer to the name of the network interface. */
-/* if the interface is not existing, a "-" is returned.                      */
-/*****************************************************************************/
-char *
-hysdn_net_getname(hysdn_card *card)
-{
-	struct net_device *dev = card->netif;
-
-	if (!dev)
-		return ("-");	/* non existing */
-
-	return (dev->name);
-}				/* hysdn_net_getname */
diff --git a/drivers/staging/isdn/hysdn/hysdn_pof.h b/drivers/staging/isdn/hysdn/hysdn_pof.h
deleted file mode 100644
index f63f5fa59d7e..000000000000
--- a/drivers/staging/isdn/hysdn/hysdn_pof.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/* $Id: hysdn_pof.h,v 1.2.6.1 2001/09/23 22:24:54 kai Exp $
- *
- * Linux driver for HYSDN cards, definitions used for handling pof-files.
- *
- * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
- * Copyright 1999 by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-/************************/
-/* POF specific defines */
-/************************/
-#define BOOT_BUF_SIZE   0x1000	/* =4096, maybe moved to other h file */
-#define CRYPT_FEEDTERM  0x8142
-#define CRYPT_STARTTERM 0x81a5
-/*  max. timeout time in seconds
- *  from end of booting to POF is ready
- */
-#define POF_READY_TIME_OUT_SEC  10
-
-/**********************************/
-/* defines for 1.stage boot image */
-/**********************************/
-
-/*  the POF file record containing the boot loader image
- *  has 2 pages a 16KB:
- *  1. page contains the high 16-bit part of the 32-bit E1 words
- *  2. page contains the low  16-bit part of the 32-bit E1 words
- *
- *  In each 16KB page we assume the start of the boot loader code
- *  in the highest 2KB part (at offset 0x3800);
- *  the rest (0x0000..0x37FF) is assumed to contain 0 bytes.
- */
-
-#define POF_BOOT_LOADER_PAGE_SIZE   0x4000	/* =16384U */
-#define POF_BOOT_LOADER_TOTAL_SIZE  (2U * POF_BOOT_LOADER_PAGE_SIZE)
-
-#define POF_BOOT_LOADER_CODE_SIZE   0x0800	/* =2KB =2048U */
-
-/* offset in boot page, where loader code may start */
-/* =0x3800= 14336U */
-#define POF_BOOT_LOADER_OFF_IN_PAGE (POF_BOOT_LOADER_PAGE_SIZE-POF_BOOT_LOADER_CODE_SIZE)
-
-
-/*--------------------------------------POF file record structs------------*/
-typedef struct PofFileHdr_tag {	/* Pof file header */
-	/*00 */ unsigned long Magic __attribute__((packed));
-	/*04 */ unsigned long N_PofRecs __attribute__((packed));
-/*08 */
-} tPofFileHdr;
-
-typedef struct PofRecHdr_tag {	/* Pof record header */
-	/*00 */ unsigned short PofRecId __attribute__((packed));
-	/*02 */ unsigned long PofRecDataLen __attribute__((packed));
-/*06 */
-} tPofRecHdr;
-
-typedef struct PofTimeStamp_tag {
-	/*00 */ unsigned long UnixTime __attribute__((packed));
-	/*04 */ unsigned char DateTimeText[0x28];
-	/* =40 */
-/*2C */
-} tPofTimeStamp;
-
-/* tPofFileHdr.Magic value: */
-#define TAGFILEMAGIC 0x464F501AUL
-/* tPofRecHdr.PofRecId values: */
-#define TAG_ABSDATA  0x1000	/* abs. data */
-#define TAG_BOOTDTA  0x1001	/* boot data */
-#define TAG_COMMENT  0x0020
-#define TAG_SYSCALL  0x0021
-#define TAG_FLOWCTRL 0x0022
-#define TAG_TIMESTMP 0x0010	/* date/time stamp of version */
-#define TAG_CABSDATA 0x1100	/* crypted abs. data */
-#define TAG_CBOOTDTA 0x1101	/* crypted boot data */
diff --git a/drivers/staging/isdn/hysdn/hysdn_procconf.c b/drivers/staging/isdn/hysdn/hysdn_procconf.c
deleted file mode 100644
index 48afd9f5316e..000000000000
--- a/drivers/staging/isdn/hysdn/hysdn_procconf.c
+++ /dev/null
@@ -1,411 +0,0 @@
-/* $Id: hysdn_procconf.c,v 1.8.6.4 2001/09/23 22:24:54 kai Exp $
- *
- * Linux driver for HYSDN cards, /proc/net filesystem dir and conf functions.
- *
- * written by Werner Cornelius (werner@titro.de) for Hypercope GmbH
- *
- * Copyright 1999  by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/cred.h>
-#include <linux/module.h>
-#include <linux/poll.h>
-#include <linux/proc_fs.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include <net/net_namespace.h>
-
-#include "hysdn_defs.h"
-
-static DEFINE_MUTEX(hysdn_conf_mutex);
-
-#define INFO_OUT_LEN 80		/* length of info line including lf */
-
-/********************************************************/
-/* defines and data structure for conf write operations */
-/********************************************************/
-#define CONF_STATE_DETECT 0	/* waiting for detect */
-#define CONF_STATE_CONF   1	/* writing config data */
-#define CONF_STATE_POF    2	/* writing pof data */
-#define CONF_LINE_LEN   255	/* 255 chars max */
-
-struct conf_writedata {
-	hysdn_card *card;	/* card the device is connected to */
-	int buf_size;		/* actual number of bytes in the buffer */
-	int needed_size;	/* needed size when reading pof */
-	int state;		/* actual interface states from above constants */
-	unsigned char conf_line[CONF_LINE_LEN];	/* buffered conf line */
-	unsigned short channel;		/* active channel number */
-	unsigned char *pof_buffer;	/* buffer when writing pof */
-};
-
-/***********************************************************************/
-/* process_line parses one config line and transfers it to the card if */
-/* necessary.                                                          */
-/* if the return value is negative an error occurred.                   */
-/***********************************************************************/
-static int
-process_line(struct conf_writedata *cnf)
-{
-	unsigned char *cp = cnf->conf_line;
-	int i;
-
-	if (cnf->card->debug_flags & LOG_CNF_LINE)
-		hysdn_addlog(cnf->card, "conf line: %s", cp);
-
-	if (*cp == '-') {	/* option */
-		cp++;		/* point to option char */
-
-		if (*cp++ != 'c')
-			return (0);	/* option unknown or used */
-		i = 0;		/* start value for channel */
-		while ((*cp <= '9') && (*cp >= '0'))
-			i = i * 10 + *cp++ - '0';	/* get decimal number */
-		if (i > 65535) {
-			if (cnf->card->debug_flags & LOG_CNF_MISC)
-				hysdn_addlog(cnf->card, "conf channel invalid  %d", i);
-			return (-ERR_INV_CHAN);		/* invalid channel */
-		}
-		cnf->channel = i & 0xFFFF;	/* set new channel number */
-		return (0);	/* success */
-	}			/* option */
-	if (*cp == '*') {	/* line to send */
-		if (cnf->card->debug_flags & LOG_CNF_DATA)
-			hysdn_addlog(cnf->card, "conf chan=%d %s", cnf->channel, cp);
-		return (hysdn_tx_cfgline(cnf->card, cnf->conf_line + 1,
-					 cnf->channel));	/* send the line without * */
-	}			/* line to send */
-	return (0);
-}				/* process_line */
-
-/***********************************/
-/* conf file operations and tables */
-/***********************************/
-
-/****************************************************/
-/* write conf file -> boot or send cfg line to card */
-/****************************************************/
-static ssize_t
-hysdn_conf_write(struct file *file, const char __user *buf, size_t count, loff_t *off)
-{
-	struct conf_writedata *cnf;
-	int i;
-	unsigned char ch, *cp;
-
-	if (!count)
-		return (0);	/* nothing to handle */
-
-	if (!(cnf = file->private_data))
-		return (-EFAULT);	/* should never happen */
-
-	if (cnf->state == CONF_STATE_DETECT) {	/* auto detect cnf or pof data */
-		if (copy_from_user(&ch, buf, 1))	/* get first char for detect */
-			return (-EFAULT);
-
-		if (ch == 0x1A) {
-			/* we detected a pof file */
-			if ((cnf->needed_size = pof_write_open(cnf->card, &cnf->pof_buffer)) <= 0)
-				return (cnf->needed_size);	/* an error occurred -> exit */
-			cnf->buf_size = 0;	/* buffer is empty */
-			cnf->state = CONF_STATE_POF;	/* new state */
-		} else {
-			/* conf data has been detected */
-			cnf->buf_size = 0;	/* buffer is empty */
-			cnf->state = CONF_STATE_CONF;	/* requested conf data write */
-			if (cnf->card->state != CARD_STATE_RUN)
-				return (-ERR_NOT_BOOTED);
-			cnf->conf_line[CONF_LINE_LEN - 1] = 0;	/* limit string length */
-			cnf->channel = 4098;	/* default channel for output */
-		}
-	}			/* state was auto detect */
-	if (cnf->state == CONF_STATE_POF) {	/* pof write active */
-		i = cnf->needed_size - cnf->buf_size;	/* bytes still missing for write */
-		if (i <= 0)
-			return (-EINVAL);	/* size error handling pof */
-
-		if (i < count)
-			count = i;	/* limit requested number of bytes */
-		if (copy_from_user(cnf->pof_buffer + cnf->buf_size, buf, count))
-			return (-EFAULT);	/* error while copying */
-		cnf->buf_size += count;
-
-		if (cnf->needed_size == cnf->buf_size) {
-			cnf->needed_size = pof_write_buffer(cnf->card, cnf->buf_size);	/* write data */
-			if (cnf->needed_size <= 0) {
-				cnf->card->state = CARD_STATE_BOOTERR;	/* show boot error */
-				return (cnf->needed_size);	/* an error occurred */
-			}
-			cnf->buf_size = 0;	/* buffer is empty again */
-		}
-	}
-	/* pof write active */
-	else {			/* conf write active */
-
-		if (cnf->card->state != CARD_STATE_RUN) {
-			if (cnf->card->debug_flags & LOG_CNF_MISC)
-				hysdn_addlog(cnf->card, "cnf write denied -> not booted");
-			return (-ERR_NOT_BOOTED);
-		}
-		i = (CONF_LINE_LEN - 1) - cnf->buf_size;	/* bytes available in buffer */
-		if (i > 0) {
-			/* copy remaining bytes into buffer */
-
-			if (count > i)
-				count = i;	/* limit transfer */
-			if (copy_from_user(cnf->conf_line + cnf->buf_size, buf, count))
-				return (-EFAULT);	/* error while copying */
-
-			i = count;	/* number of chars in buffer */
-			cp = cnf->conf_line + cnf->buf_size;
-			while (i) {
-				/* search for end of line */
-				if ((*cp < ' ') && (*cp != 9))
-					break;	/* end of line found */
-				cp++;
-				i--;
-			}	/* search for end of line */
-
-			if (i) {
-				/* delimiter found */
-				*cp++ = 0;	/* string termination */
-				count -= (i - 1);	/* subtract remaining bytes from count */
-				while ((i) && (*cp < ' ') && (*cp != 9)) {
-					i--;	/* discard next char */
-					count++;	/* mark as read */
-					cp++;	/* next char */
-				}
-				cnf->buf_size = 0;	/* buffer is empty after transfer */
-				if ((i = process_line(cnf)) < 0)	/* handle the line */
-					count = i;	/* return the error */
-			}
-			/* delimiter found */
-			else {
-				cnf->buf_size += count;		/* add chars to string */
-				if (cnf->buf_size >= CONF_LINE_LEN - 1) {
-					if (cnf->card->debug_flags & LOG_CNF_MISC)
-						hysdn_addlog(cnf->card, "cnf line too long %d chars pos %d", cnf->buf_size, count);
-					return (-ERR_CONF_LONG);
-				}
-			}	/* not delimited */
-
-		}
-		/* copy remaining bytes into buffer */
-		else {
-			if (cnf->card->debug_flags & LOG_CNF_MISC)
-				hysdn_addlog(cnf->card, "cnf line too long");
-			return (-ERR_CONF_LONG);
-		}
-	}			/* conf write active */
-
-	return (count);
-}				/* hysdn_conf_write */
-
-/*******************************************/
-/* read conf file -> output card info data */
-/*******************************************/
-static ssize_t
-hysdn_conf_read(struct file *file, char __user *buf, size_t count, loff_t *off)
-{
-	char *cp;
-
-	if (!(file->f_mode & FMODE_READ))
-		return -EPERM;	/* no permission to read */
-
-	if (!(cp = file->private_data))
-		return -EFAULT;	/* should never happen */
-
-	return simple_read_from_buffer(buf, count, off, cp, strlen(cp));
-}				/* hysdn_conf_read */
-
-/******************/
-/* open conf file */
-/******************/
-static int
-hysdn_conf_open(struct inode *ino, struct file *filep)
-{
-	hysdn_card *card;
-	struct conf_writedata *cnf;
-	char *cp, *tmp;
-
-	/* now search the addressed card */
-	mutex_lock(&hysdn_conf_mutex);
-	card = PDE_DATA(ino);
-	if (card->debug_flags & (LOG_PROC_OPEN | LOG_PROC_ALL))
-		hysdn_addlog(card, "config open for uid=%d gid=%d mode=0x%x",
-			     filep->f_cred->fsuid, filep->f_cred->fsgid,
-			     filep->f_mode);
-
-	if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_WRITE) {
-		/* write only access -> write boot file or conf line */
-
-		if (!(cnf = kmalloc(sizeof(struct conf_writedata), GFP_KERNEL))) {
-			mutex_unlock(&hysdn_conf_mutex);
-			return (-EFAULT);
-		}
-		cnf->card = card;
-		cnf->buf_size = 0;	/* nothing buffered */
-		cnf->state = CONF_STATE_DETECT;		/* start auto detect */
-		filep->private_data = cnf;
-
-	} else if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ) {
-		/* read access -> output card info data */
-
-		if (!(tmp = kmalloc(INFO_OUT_LEN * 2 + 2, GFP_KERNEL))) {
-			mutex_unlock(&hysdn_conf_mutex);
-			return (-EFAULT);	/* out of memory */
-		}
-		filep->private_data = tmp;	/* start of string */
-
-		/* first output a headline */
-		sprintf(tmp, "id bus slot type irq iobase dp-mem     b-chans fax-chans state device");
-		cp = tmp;	/* start of string */
-		while (*cp)
-			cp++;
-		while (((cp - tmp) % (INFO_OUT_LEN + 1)) != INFO_OUT_LEN)
-			*cp++ = ' ';
-		*cp++ = '\n';
-
-		/* and now the data */
-		sprintf(cp, "%d  %3d %4d %4d %3d 0x%04x 0x%08lx %7d %9d %3d   %s",
-			card->myid,
-			card->bus,
-			PCI_SLOT(card->devfn),
-			card->brdtype,
-			card->irq,
-			card->iobase,
-			card->membase,
-			card->bchans,
-			card->faxchans,
-			card->state,
-			hysdn_net_getname(card));
-		while (*cp)
-			cp++;
-		while (((cp - tmp) % (INFO_OUT_LEN + 1)) != INFO_OUT_LEN)
-			*cp++ = ' ';
-		*cp++ = '\n';
-		*cp = 0;	/* end of string */
-	} else {		/* simultaneous read/write access forbidden ! */
-		mutex_unlock(&hysdn_conf_mutex);
-		return (-EPERM);	/* no permission this time */
-	}
-	mutex_unlock(&hysdn_conf_mutex);
-	return nonseekable_open(ino, filep);
-}				/* hysdn_conf_open */
-
-/***************************/
-/* close a config file.    */
-/***************************/
-static int
-hysdn_conf_close(struct inode *ino, struct file *filep)
-{
-	hysdn_card *card;
-	struct conf_writedata *cnf;
-	int retval = 0;
-
-	mutex_lock(&hysdn_conf_mutex);
-	card = PDE_DATA(ino);
-	if (card->debug_flags & (LOG_PROC_OPEN | LOG_PROC_ALL))
-		hysdn_addlog(card, "config close for uid=%d gid=%d mode=0x%x",
-			     filep->f_cred->fsuid, filep->f_cred->fsgid,
-			     filep->f_mode);
-
-	if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_WRITE) {
-		/* write only access -> write boot file or conf line */
-		if (filep->private_data) {
-			cnf = filep->private_data;
-
-			if (cnf->state == CONF_STATE_POF)
-				retval = pof_write_close(cnf->card);	/* close the pof write */
-			kfree(filep->private_data);	/* free allocated memory for buffer */
-
-		}		/* handle write private data */
-	} else if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ) {
-		/* read access -> output card info data */
-
-		kfree(filep->private_data);	/* release memory */
-	}
-	mutex_unlock(&hysdn_conf_mutex);
-	return (retval);
-}				/* hysdn_conf_close */
-
-/******************************************************/
-/* table for conf filesystem functions defined above. */
-/******************************************************/
-static const struct file_operations conf_fops =
-{
-	.owner		= THIS_MODULE,
-	.llseek         = no_llseek,
-	.read           = hysdn_conf_read,
-	.write          = hysdn_conf_write,
-	.open           = hysdn_conf_open,
-	.release        = hysdn_conf_close,
-};
-
-/*****************************/
-/* hysdn subdir in /proc/net */
-/*****************************/
-struct proc_dir_entry *hysdn_proc_entry = NULL;
-
-/*******************************************************************************/
-/* hysdn_procconf_init is called when the module is loaded and after the cards */
-/* have been detected. The needed proc dir and card config files are created.  */
-/* The log init is called at last.                                             */
-/*******************************************************************************/
-int
-hysdn_procconf_init(void)
-{
-	hysdn_card *card;
-	unsigned char conf_name[20];
-
-	hysdn_proc_entry = proc_mkdir(PROC_SUBDIR_NAME, init_net.proc_net);
-	if (!hysdn_proc_entry) {
-		printk(KERN_ERR "HYSDN: unable to create hysdn subdir\n");
-		return (-1);
-	}
-	card = card_root;	/* point to first card */
-	while (card) {
-
-		sprintf(conf_name, "%s%d", PROC_CONF_BASENAME, card->myid);
-		if ((card->procconf = (void *) proc_create_data(conf_name,
-							   S_IFREG | S_IRUGO | S_IWUSR,
-							   hysdn_proc_entry,
-							   &conf_fops,
-							   card)) != NULL) {
-			hysdn_proclog_init(card);	/* init the log file entry */
-		}
-		card = card->next;	/* next entry */
-	}
-
-	printk(KERN_NOTICE "HYSDN: procfs initialised\n");
-	return 0;
-}				/* hysdn_procconf_init */
-
-/*************************************************************************************/
-/* hysdn_procconf_release is called when the module is unloaded and before the cards */
-/* resources are released. The module counter is assumed to be 0 !                   */
-/*************************************************************************************/
-void
-hysdn_procconf_release(void)
-{
-	hysdn_card *card;
-	unsigned char conf_name[20];
-
-	card = card_root;	/* start with first card */
-	while (card) {
-
-		sprintf(conf_name, "%s%d", PROC_CONF_BASENAME, card->myid);
-		if (card->procconf)
-			remove_proc_entry(conf_name, hysdn_proc_entry);
-
-		hysdn_proclog_release(card);	/* init the log file entry */
-
-		card = card->next;	/* point to next card */
-	}
-
-	remove_proc_entry(PROC_SUBDIR_NAME, init_net.proc_net);
-}
diff --git a/drivers/staging/isdn/hysdn/hysdn_proclog.c b/drivers/staging/isdn/hysdn/hysdn_proclog.c
deleted file mode 100644
index 6e898b90e86e..000000000000
--- a/drivers/staging/isdn/hysdn/hysdn_proclog.c
+++ /dev/null
@@ -1,357 +0,0 @@
-/* $Id: hysdn_proclog.c,v 1.9.6.3 2001/09/23 22:24:54 kai Exp $
- *
- * Linux driver for HYSDN cards, /proc/net filesystem log functions.
- *
- * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
- * Copyright 1999 by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/module.h>
-#include <linux/poll.h>
-#include <linux/proc_fs.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include <linux/kernel.h>
-
-#include "hysdn_defs.h"
-
-/* the proc subdir for the interface is defined in the procconf module */
-extern struct proc_dir_entry *hysdn_proc_entry;
-
-static DEFINE_MUTEX(hysdn_log_mutex);
-static void put_log_buffer(hysdn_card *card, char *cp);
-
-/*************************************************/
-/* structure keeping ascii log for device output */
-/*************************************************/
-struct log_data {
-	struct log_data *next;
-	unsigned long usage_cnt;/* number of files still to work */
-	void *proc_ctrl;	/* pointer to own control procdata structure */
-	char log_start[2];	/* log string start (final len aligned by size) */
-};
-
-/**********************************************/
-/* structure holding proc entrys for one card */
-/**********************************************/
-struct procdata {
-	struct proc_dir_entry *log;	/* log entry */
-	char log_name[15];	/* log filename */
-	struct log_data *log_head, *log_tail;	/* head and tail for queue */
-	int if_used;		/* open count for interface */
-	unsigned char logtmp[LOG_MAX_LINELEN];
-	wait_queue_head_t rd_queue;
-};
-
-
-/**********************************************/
-/* log function for cards error log interface */
-/**********************************************/
-void
-hysdn_card_errlog(hysdn_card *card, tErrLogEntry *logp, int maxsize)
-{
-	char buf[ERRLOG_TEXT_SIZE + 40];
-
-	sprintf(buf, "LOG 0x%08lX 0x%08lX : %s\n", logp->ulErrType, logp->ulErrSubtype, logp->ucText);
-	put_log_buffer(card, buf);	/* output the string */
-}				/* hysdn_card_errlog */
-
-/***************************************************/
-/* Log function using format specifiers for output */
-/***************************************************/
-void
-hysdn_addlog(hysdn_card *card, char *fmt, ...)
-{
-	struct procdata *pd = card->proclog;
-	char *cp;
-	va_list args;
-
-	if (!pd)
-		return;		/* log structure non existent */
-
-	cp = pd->logtmp;
-	cp += sprintf(cp, "HYSDN: card %d ", card->myid);
-
-	va_start(args, fmt);
-	cp += vsprintf(cp, fmt, args);
-	va_end(args);
-	*cp++ = '\n';
-	*cp = 0;
-
-	if (card->debug_flags & DEB_OUT_SYSLOG)
-		printk(KERN_INFO "%s", pd->logtmp);
-	else
-		put_log_buffer(card, pd->logtmp);
-
-}				/* hysdn_addlog */
-
-/********************************************/
-/* put an log buffer into the log queue.    */
-/* This buffer will be kept until all files */
-/* opened for read got the contents.        */
-/* Flushes buffers not longer in use.       */
-/********************************************/
-static void
-put_log_buffer(hysdn_card *card, char *cp)
-{
-	struct log_data *ib;
-	struct procdata *pd = card->proclog;
-	unsigned long flags;
-
-	if (!pd)
-		return;
-	if (!cp)
-		return;
-	if (!*cp)
-		return;
-	if (pd->if_used <= 0)
-		return;		/* no open file for read */
-
-	if (!(ib = kmalloc(sizeof(struct log_data) + strlen(cp), GFP_ATOMIC)))
-		return;	/* no memory */
-	strcpy(ib->log_start, cp);	/* set output string */
-	ib->next = NULL;
-	ib->proc_ctrl = pd;	/* point to own control structure */
-	spin_lock_irqsave(&card->hysdn_lock, flags);
-	ib->usage_cnt = pd->if_used;
-	if (!pd->log_head)
-		pd->log_head = ib;	/* new head */
-	else
-		pd->log_tail->next = ib;	/* follows existing messages */
-	pd->log_tail = ib;	/* new tail */
-
-	/* delete old entrys */
-	while (pd->log_head->next) {
-		if ((pd->log_head->usage_cnt <= 0) &&
-		    (pd->log_head->next->usage_cnt <= 0)) {
-			ib = pd->log_head;
-			pd->log_head = pd->log_head->next;
-			kfree(ib);
-		} else {
-			break;
-		}
-	}		/* pd->log_head->next */
-
-	spin_unlock_irqrestore(&card->hysdn_lock, flags);
-
-	wake_up_interruptible(&(pd->rd_queue));		/* announce new entry */
-}				/* put_log_buffer */
-
-
-/******************************/
-/* file operations and tables */
-/******************************/
-
-/****************************************/
-/* write log file -> set log level bits */
-/****************************************/
-static ssize_t
-hysdn_log_write(struct file *file, const char __user *buf, size_t count, loff_t *off)
-{
-	int rc;
-	hysdn_card *card = file->private_data;
-
-	rc = kstrtoul_from_user(buf, count, 0, &card->debug_flags);
-	if (rc < 0)
-		return rc;
-	hysdn_addlog(card, "debug set to 0x%lx", card->debug_flags);
-	return (count);
-}				/* hysdn_log_write */
-
-/******************/
-/* read log file */
-/******************/
-static ssize_t
-hysdn_log_read(struct file *file, char __user *buf, size_t count, loff_t *off)
-{
-	struct log_data *inf;
-	int len;
-	hysdn_card *card = PDE_DATA(file_inode(file));
-
-	if (!(inf = *((struct log_data **) file->private_data))) {
-		struct procdata *pd = card->proclog;
-		if (file->f_flags & O_NONBLOCK)
-			return (-EAGAIN);
-
-		wait_event_interruptible(pd->rd_queue, (inf =
-				*((struct log_data **) file->private_data)));
-	}
-	if (!inf)
-		return (0);
-
-	inf->usage_cnt--;	/* new usage count */
-	file->private_data = &inf->next;	/* next structure */
-	if ((len = strlen(inf->log_start)) <= count) {
-		if (copy_to_user(buf, inf->log_start, len))
-			return -EFAULT;
-		*off += len;
-		return (len);
-	}
-	return (0);
-}				/* hysdn_log_read */
-
-/******************/
-/* open log file */
-/******************/
-static int
-hysdn_log_open(struct inode *ino, struct file *filep)
-{
-	hysdn_card *card = PDE_DATA(ino);
-
-	mutex_lock(&hysdn_log_mutex);
-	if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_WRITE) {
-		/* write only access -> write log level only */
-		filep->private_data = card;	/* remember our own card */
-	} else if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ) {
-		struct procdata *pd = card->proclog;
-		unsigned long flags;
-
-		/* read access -> log/debug read */
-		spin_lock_irqsave(&card->hysdn_lock, flags);
-		pd->if_used++;
-		if (pd->log_head)
-			filep->private_data = &pd->log_tail->next;
-		else
-			filep->private_data = &pd->log_head;
-		spin_unlock_irqrestore(&card->hysdn_lock, flags);
-	} else {		/* simultaneous read/write access forbidden ! */
-		mutex_unlock(&hysdn_log_mutex);
-		return (-EPERM);	/* no permission this time */
-	}
-	mutex_unlock(&hysdn_log_mutex);
-	return nonseekable_open(ino, filep);
-}				/* hysdn_log_open */
-
-/*******************************************************************************/
-/* close a cardlog file. If the file has been opened for exclusive write it is */
-/* assumed as pof data input and the pof loader is noticed about.              */
-/* Otherwise file is handled as log output. In this case the interface usage   */
-/* count is decremented and all buffers are noticed of closing. If this file   */
-/* was the last one to be closed, all buffers are freed.                       */
-/*******************************************************************************/
-static int
-hysdn_log_close(struct inode *ino, struct file *filep)
-{
-	struct log_data *inf;
-	struct procdata *pd;
-	hysdn_card *card;
-	int retval = 0;
-
-	mutex_lock(&hysdn_log_mutex);
-	if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_WRITE) {
-		/* write only access -> write debug level written */
-		retval = 0;	/* success */
-	} else {
-		/* read access -> log/debug read, mark one further file as closed */
-
-		inf = *((struct log_data **) filep->private_data);	/* get first log entry */
-		if (inf)
-			pd = (struct procdata *) inf->proc_ctrl;	/* still entries there */
-		else {
-			/* no info available -> search card */
-			card = PDE_DATA(file_inode(filep));
-			pd = card->proclog;	/* pointer to procfs log */
-		}
-		if (pd)
-			pd->if_used--;	/* decrement interface usage count by one */
-
-		while (inf) {
-			inf->usage_cnt--;	/* decrement usage count for buffers */
-			inf = inf->next;
-		}
-
-		if (pd)
-			if (pd->if_used <= 0)	/* delete buffers if last file closed */
-				while (pd->log_head) {
-					inf = pd->log_head;
-					pd->log_head = pd->log_head->next;
-					kfree(inf);
-				}
-	}			/* read access */
-	mutex_unlock(&hysdn_log_mutex);
-
-	return (retval);
-}				/* hysdn_log_close */
-
-/*************************************************/
-/* select/poll routine to be able using select() */
-/*************************************************/
-static __poll_t
-hysdn_log_poll(struct file *file, poll_table *wait)
-{
-	__poll_t mask = 0;
-	hysdn_card *card = PDE_DATA(file_inode(file));
-	struct procdata *pd = card->proclog;
-
-	if ((file->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_WRITE)
-		return (mask);	/* no polling for write supported */
-
-	poll_wait(file, &(pd->rd_queue), wait);
-
-	if (*((struct log_data **) file->private_data))
-		mask |= EPOLLIN | EPOLLRDNORM;
-
-	return mask;
-}				/* hysdn_log_poll */
-
-/**************************************************/
-/* table for log filesystem functions defined above. */
-/**************************************************/
-static const struct file_operations log_fops =
-{
-	.owner		= THIS_MODULE,
-	.llseek         = no_llseek,
-	.read           = hysdn_log_read,
-	.write          = hysdn_log_write,
-	.poll           = hysdn_log_poll,
-	.open           = hysdn_log_open,
-	.release        = hysdn_log_close,
-};
-
-
-/***********************************************************************************/
-/* hysdn_proclog_init is called when the module is loaded after creating the cards */
-/* conf files.                                                                     */
-/***********************************************************************************/
-int
-hysdn_proclog_init(hysdn_card *card)
-{
-	struct procdata *pd;
-
-	/* create a cardlog proc entry */
-
-	if ((pd = kzalloc(sizeof(struct procdata), GFP_KERNEL)) != NULL) {
-		sprintf(pd->log_name, "%s%d", PROC_LOG_BASENAME, card->myid);
-		pd->log = proc_create_data(pd->log_name,
-				      S_IFREG | S_IRUGO | S_IWUSR, hysdn_proc_entry,
-				      &log_fops, card);
-
-		init_waitqueue_head(&(pd->rd_queue));
-
-		card->proclog = (void *) pd;	/* remember procfs structure */
-	}
-	return (0);
-}				/* hysdn_proclog_init */
-
-/************************************************************************************/
-/* hysdn_proclog_release is called when the module is unloaded and before the cards */
-/* conf file is released                                                            */
-/* The module counter is assumed to be 0 !                                          */
-/************************************************************************************/
-void
-hysdn_proclog_release(hysdn_card *card)
-{
-	struct procdata *pd;
-
-	if ((pd = (struct procdata *) card->proclog) != NULL) {
-		if (pd->log)
-			remove_proc_entry(pd->log_name, hysdn_proc_entry);
-		kfree(pd);	/* release memory */
-		card->proclog = NULL;
-	}
-}				/* hysdn_proclog_release */
diff --git a/drivers/staging/isdn/hysdn/hysdn_sched.c b/drivers/staging/isdn/hysdn/hysdn_sched.c
deleted file mode 100644
index 31d7c1415543..000000000000
--- a/drivers/staging/isdn/hysdn/hysdn_sched.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/* $Id: hysdn_sched.c,v 1.5.6.4 2001/11/06 21:58:19 kai Exp $
- *
- * Linux driver for HYSDN cards
- * scheduler routines for handling exchange card <-> pc.
- *
- * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
- * Copyright 1999 by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/signal.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-
-#include "hysdn_defs.h"
-
-/*****************************************************************************/
-/* hysdn_sched_rx is called from the cards handler to announce new data is   */
-/* available from the card. The routine has to handle the data and return    */
-/* with a nonzero code if the data could be worked (or even thrown away), if */
-/* no room to buffer the data is available a zero return tells the card      */
-/* to keep the data until later.                                             */
-/*****************************************************************************/
-int
-hysdn_sched_rx(hysdn_card *card, unsigned char *buf, unsigned short len,
-	       unsigned short chan)
-{
-
-	switch (chan) {
-	case CHAN_NDIS_DATA:
-		if (hynet_enable & (1 << card->myid)) {
-			/* give packet to network handler */
-			hysdn_rx_netpkt(card, buf, len);
-		}
-		break;
-
-	case CHAN_ERRLOG:
-		hysdn_card_errlog(card, (tErrLogEntry *) buf, len);
-		if (card->err_log_state == ERRLOG_STATE_ON)
-			card->err_log_state = ERRLOG_STATE_START;	/* start new fetch */
-		break;
-#ifdef CONFIG_HYSDN_CAPI
-	case CHAN_CAPI:
-/* give packet to CAPI handler */
-		if (hycapi_enable & (1 << card->myid)) {
-			hycapi_rx_capipkt(card, buf, len);
-		}
-		break;
-#endif /* CONFIG_HYSDN_CAPI */
-	default:
-		printk(KERN_INFO "irq message channel %d len %d unhandled \n", chan, len);
-		break;
-
-	}			/* switch rx channel */
-
-	return (1);		/* always handled */
-}				/* hysdn_sched_rx */
-
-/*****************************************************************************/
-/* hysdn_sched_tx is called from the cards handler to announce that there is */
-/* room in the tx-buffer to the card and data may be sent if needed.         */
-/* If the routine wants to send data it must fill buf, len and chan with the */
-/* appropriate data and return a nonzero value. With a zero return no new    */
-/* data to send is assumed. maxlen specifies the buffer size available for   */
-/* sending.                                                                  */
-/*****************************************************************************/
-int
-hysdn_sched_tx(hysdn_card *card, unsigned char *buf,
-	       unsigned short volatile *len, unsigned short volatile *chan,
-	       unsigned short maxlen)
-{
-	struct sk_buff *skb;
-
-	if (card->net_tx_busy) {
-		card->net_tx_busy = 0;	/* reset flag */
-		hysdn_tx_netack(card);	/* acknowledge packet send */
-	}			/* a network packet has completely been transferred */
-	/* first of all async requests are handled */
-	if (card->async_busy) {
-		if (card->async_len <= maxlen) {
-			memcpy(buf, card->async_data, card->async_len);
-			*len = card->async_len;
-			*chan = card->async_channel;
-			card->async_busy = 0;	/* reset request */
-			return (1);
-		}
-		card->async_busy = 0;	/* in case of length error */
-	}			/* async request */
-	if ((card->err_log_state == ERRLOG_STATE_START) &&
-	    (maxlen >= ERRLOG_CMD_REQ_SIZE)) {
-		strcpy(buf, ERRLOG_CMD_REQ);	/* copy the command */
-		*len = ERRLOG_CMD_REQ_SIZE;	/* buffer length */
-		*chan = CHAN_ERRLOG;	/* and channel */
-		card->err_log_state = ERRLOG_STATE_ON;	/* new state is on */
-		return (1);	/* tell that data should be send */
-	}			/* error log start and able to send */
-	if ((card->err_log_state == ERRLOG_STATE_STOP) &&
-	    (maxlen >= ERRLOG_CMD_STOP_SIZE)) {
-		strcpy(buf, ERRLOG_CMD_STOP);	/* copy the command */
-		*len = ERRLOG_CMD_STOP_SIZE;	/* buffer length */
-		*chan = CHAN_ERRLOG;	/* and channel */
-		card->err_log_state = ERRLOG_STATE_OFF;		/* new state is off */
-		return (1);	/* tell that data should be send */
-	}			/* error log start and able to send */
-	/* now handle network interface packets */
-	if ((hynet_enable & (1 << card->myid)) &&
-	    (skb = hysdn_tx_netget(card)) != NULL)
-	{
-		if (skb->len <= maxlen) {
-			/* copy the packet to the buffer */
-			skb_copy_from_linear_data(skb, buf, skb->len);
-			*len = skb->len;
-			*chan = CHAN_NDIS_DATA;
-			card->net_tx_busy = 1;	/* we are busy sending network data */
-			return (1);	/* go and send the data */
-		} else
-			hysdn_tx_netack(card);	/* aknowledge packet -> throw away */
-	}			/* send a network packet if available */
-#ifdef CONFIG_HYSDN_CAPI
-	if (((hycapi_enable & (1 << card->myid))) &&
-	    ((skb = hycapi_tx_capiget(card)) != NULL))
-	{
-		if (skb->len <= maxlen) {
-			skb_copy_from_linear_data(skb, buf, skb->len);
-			*len = skb->len;
-			*chan = CHAN_CAPI;
-			hycapi_tx_capiack(card);
-			return (1);	/* go and send the data */
-		}
-	}
-#endif /* CONFIG_HYSDN_CAPI */
-	return (0);		/* nothing to send */
-}				/* hysdn_sched_tx */
-
-
-/*****************************************************************************/
-/* send one config line to the card and return 0 if successful, otherwise a */
-/* negative error code.                                                      */
-/* The function works with timeouts perhaps not giving the greatest speed    */
-/* sending the line, but this should be meaningless because only some lines  */
-/* are to be sent and this happens very seldom.                              */
-/*****************************************************************************/
-int
-hysdn_tx_cfgline(hysdn_card *card, unsigned char *line, unsigned short chan)
-{
-	int cnt = 50;		/* timeout intervalls */
-	unsigned long flags;
-
-	if (card->debug_flags & LOG_SCHED_ASYN)
-		hysdn_addlog(card, "async tx-cfg chan=%d len=%d", chan, strlen(line) + 1);
-
-	while (card->async_busy) {
-
-		if (card->debug_flags & LOG_SCHED_ASYN)
-			hysdn_addlog(card, "async tx-cfg delayed");
-
-		msleep_interruptible(20);		/* Timeout 20ms */
-		if (!--cnt)
-			return (-ERR_ASYNC_TIME);	/* timed out */
-	}			/* wait for buffer to become free */
-
-	spin_lock_irqsave(&card->hysdn_lock, flags);
-	strcpy(card->async_data, line);
-	card->async_len = strlen(line) + 1;
-	card->async_channel = chan;
-	card->async_busy = 1;	/* request transfer */
-
-	/* now queue the task */
-	schedule_work(&card->irq_queue);
-	spin_unlock_irqrestore(&card->hysdn_lock, flags);
-
-	if (card->debug_flags & LOG_SCHED_ASYN)
-		hysdn_addlog(card, "async tx-cfg data queued");
-
-	cnt++;			/* short delay */
-
-	while (card->async_busy) {
-
-		if (card->debug_flags & LOG_SCHED_ASYN)
-			hysdn_addlog(card, "async tx-cfg waiting for tx-ready");
-
-		msleep_interruptible(20);		/* Timeout 20ms */
-		if (!--cnt)
-			return (-ERR_ASYNC_TIME);	/* timed out */
-	}			/* wait for buffer to become free again */
-
-	if (card->debug_flags & LOG_SCHED_ASYN)
-		hysdn_addlog(card, "async tx-cfg data send");
-
-	return (0);		/* line send correctly */
-}				/* hysdn_tx_cfgline */
diff --git a/drivers/staging/isdn/hysdn/ince1pc.h b/drivers/staging/isdn/hysdn/ince1pc.h
deleted file mode 100644
index cab68361de65..000000000000
--- a/drivers/staging/isdn/hysdn/ince1pc.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * Linux driver for HYSDN cards
- * common definitions for both sides of the bus:
- * - conventions both spoolers must know
- * - channel numbers agreed upon
- *
- * Author    M. Steinkopf
- * Copyright 1999 by M. Steinkopf
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#ifndef __INCE1PC_H__
-#define __INCE1PC_H__
-
-/*  basic scalar definitions have same meanning,
- *  but their declaration location depends on environment
- */
-
-/*--------------------------------------channel numbers---------------------*/
-#define CHAN_SYSTEM     0x0001      /* system channel (spooler to spooler) */
-#define CHAN_ERRLOG     0x0005      /* error logger */
-#define CHAN_CAPI       0x0064      /* CAPI interface */
-#define CHAN_NDIS_DATA  0x1001      /* NDIS data transfer */
-
-/*--------------------------------------POF ready msg-----------------------*/
-/* NOTE: after booting POF sends system ready message to PC: */
-#define RDY_MAGIC       0x52535953UL    /* 'SYSR' reversed */
-#define RDY_MAGIC_SIZE  4               /* size in bytes */
-
-#define MAX_N_TOK_BYTES 255
-
-#define MIN_RDY_MSG_SIZE    RDY_MAGIC_SIZE
-#define MAX_RDY_MSG_SIZE    (RDY_MAGIC_SIZE + MAX_N_TOK_BYTES)
-
-#define SYSR_TOK_END            0
-#define SYSR_TOK_B_CHAN         1   /* nr. of B-Channels;   DataLen=1; def: 2 */
-#define SYSR_TOK_FAX_CHAN       2   /* nr. of FAX Channels; DataLen=1; def: 0 */
-#define SYSR_TOK_MAC_ADDR       3   /* MAC-Address; DataLen=6; def: auto */
-#define SYSR_TOK_ESC            255 /* undefined data size yet */
-/* default values, if not corrected by token: */
-#define SYSR_TOK_B_CHAN_DEF     2   /* assume 2 B-Channels */
-#define SYSR_TOK_FAX_CHAN_DEF   1   /* assume 1 FAX Channel */
-
-/*  syntax of new SYSR token stream:
- *  channel: CHAN_SYSTEM
- *  msgsize: MIN_RDY_MSG_SIZE <= x <= MAX_RDY_MSG_SIZE
- *           RDY_MAGIC_SIZE   <= x <= (RDY_MAGIC_SIZE+MAX_N_TOK_BYTES)
- *  msg    : 0 1 2 3 {4 5 6 ..}
- *           S Y S R  MAX_N_TOK_BYTES bytes of TokenStream
- *
- *  TokenStream     :=   empty
- *                     | {NonEndTokenChunk} EndToken RotlCRC
- *  NonEndTokenChunk:= NonEndTokenId DataLen [Data]
- *  NonEndTokenId   := 0x01 .. 0xFE                 1 BYTE
- *  DataLen         := 0x00 .. 0xFF                 1 BYTE
- *  Data            := DataLen bytes
- *  EndToken        := 0x00
- *  RotlCRC         := special 1 byte CRC over all NonEndTokenChunk bytes
- *                     s. RotlCRC algorithm
- *
- *  RotlCRC algorithm:
- *      ucSum= 0                        1 unsigned char
- *      for all NonEndTokenChunk bytes:
- *          ROTL(ucSum,1)               rotate left by 1
- *          ucSum += Char;              add current byte with swap around
- *      RotlCRC= ~ucSum;                invert all bits for result
- *
- *  note:
- *  - for 16-bit FIFO add padding 0 byte to achieve even token data bytes!
- */
-
-/*--------------------------------------error logger------------------------*/
-/* note: pof needs final 0 ! */
-#define ERRLOG_CMD_REQ          "ERRLOG ON"
-#define ERRLOG_CMD_REQ_SIZE     10              /* with final 0 byte ! */
-#define ERRLOG_CMD_STOP         "ERRLOG OFF"
-#define ERRLOG_CMD_STOP_SIZE    11              /* with final 0 byte ! */
-
-#define ERRLOG_ENTRY_SIZE       64      /* sizeof(tErrLogEntry) */
-					/* remaining text size = 55 */
-#define ERRLOG_TEXT_SIZE    (ERRLOG_ENTRY_SIZE - 2 * 4 - 1)
-
-typedef struct ErrLogEntry_tag {
-
-	/*00 */ unsigned long ulErrType;
-
-	/*04 */ unsigned long ulErrSubtype;
-
-	/*08 */ unsigned char ucTextSize;
-
-	/*09 */ unsigned char ucText[ERRLOG_TEXT_SIZE];
-	/* ASCIIZ of len ucTextSize-1 */
-
-/*40 */
-} tErrLogEntry;
-
-
-#if defined(__TURBOC__)
-#if sizeof(tErrLogEntry) != ERRLOG_ENTRY_SIZE
-#error size of tErrLogEntry != ERRLOG_ENTRY_SIZE
-#endif				/*  */
-#endif				/*  */
-
-/*--------------------------------------DPRAM boot spooler------------------*/
-/*  this is the struture used between pc and
- *  hyperstone to exchange boot data
- */
-#define DPRAM_SPOOLER_DATA_SIZE 0x20
-typedef struct DpramBootSpooler_tag {
-
-	/*00 */ unsigned char Len;
-
-	/*01 */ volatile unsigned char RdPtr;
-
-	/*02 */ unsigned char WrPtr;
-
-	/*03 */ unsigned char Data[DPRAM_SPOOLER_DATA_SIZE];
-
-/*23 */
-} tDpramBootSpooler;
-
-
-#define DPRAM_SPOOLER_MIN_SIZE  5       /* Len+RdPtr+Wrptr+2*data */
-#define DPRAM_SPOOLER_DEF_SIZE  0x23    /* current default size   */
-
-/*--------------------------------------HYCARD/ERGO DPRAM SoftUart----------*/
-/* at DPRAM offset 0x1C00: */
-#define SIZE_RSV_SOFT_UART  0x1B0   /* 432 bytes reserved for SoftUart */
-
-
-#endif	/* __INCE1PC_H__ */
diff --git a/include/linux/b1pcmcia.h b/include/linux/b1pcmcia.h
deleted file mode 100644
index 12a867c6061e..000000000000
--- a/include/linux/b1pcmcia.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* $Id: b1pcmcia.h,v 1.1.8.2 2001/09/23 22:25:05 kai Exp $
- *
- * Exported functions of module b1pcmcia to be called by
- * avm_cs card services module.
- *
- * Copyright 1999 by Carsten Paeth (calle@calle.in-berlin.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#ifndef _B1PCMCIA_H_
-#define _B1PCMCIA_H_
-
-int b1pcmcia_addcard_b1(unsigned int port, unsigned irq);
-int b1pcmcia_addcard_m1(unsigned int port, unsigned irq);
-int b1pcmcia_addcard_m2(unsigned int port, unsigned irq);
-int b1pcmcia_delcard(unsigned int port, unsigned irq);
-
-#endif	/* _B1PCMCIA_H_ */
diff --git a/include/uapi/linux/gigaset_dev.h b/include/uapi/linux/gigaset_dev.h
deleted file mode 100644
index 279551af8ebf..000000000000
--- a/include/uapi/linux/gigaset_dev.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
-/*
- * interface to user space for the gigaset driver
- *
- * Copyright (c) 2004 by Hansjoerg Lipp <hjlipp@web.de>
- *
- * =====================================================================
- *    This program is free software; you can redistribute it and/or
- *    modify it under the terms of the GNU General Public License as
- *    published by the Free Software Foundation; either version 2 of
- *    the License, or (at your option) any later version.
- * =====================================================================
- */
-
-#ifndef GIGASET_INTERFACE_H
-#define GIGASET_INTERFACE_H
-
-#include <linux/ioctl.h>
-
-/* The magic IOCTL value for this interface. */
-#define GIGASET_IOCTL 0x47
-
-/* enable/disable device control via character device (lock out ISDN subsys) */
-#define GIGASET_REDIR    _IOWR(GIGASET_IOCTL, 0, int)
-
-/* enable adapter configuration mode (M10x only) */
-#define GIGASET_CONFIG   _IOWR(GIGASET_IOCTL, 1, int)
-
-/* set break characters (M105 only) */
-#define GIGASET_BRKCHARS _IOW(GIGASET_IOCTL, 2, unsigned char[6])
-
-/* get version information selected by arg[0] */
-#define GIGASET_VERSION  _IOWR(GIGASET_IOCTL, 3, unsigned[4])
-/* values for GIGASET_VERSION arg[0] */
-#define GIGVER_DRIVER 0		/* get driver version */
-#define GIGVER_COMPAT 1		/* get interface compatibility version */
-#define GIGVER_FWBASE 2		/* get base station firmware version */
-
-#endif
diff --git a/include/uapi/linux/hysdn_if.h b/include/uapi/linux/hysdn_if.h
deleted file mode 100644
index 99f77c517e6d..000000000000
--- a/include/uapi/linux/hysdn_if.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/* $Id: hysdn_if.h,v 1.1.8.3 2001/09/23 22:25:05 kai Exp $
- *
- * Linux driver for HYSDN cards
- * ioctl definitions shared by hynetmgr and driver.
- *
- * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
- * Copyright 1999 by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-/****************/
-/* error values */
-/****************/
-#define ERR_NONE             0 /* no error occurred */
-#define ERR_ALREADY_BOOT  1000 /* we are already booting */
-#define EPOF_BAD_MAGIC    1001 /* bad magic in POF header */
-#define ERR_BOARD_DPRAM   1002 /* board DPRAM failed */
-#define EPOF_INTERNAL     1003 /* internal POF handler error */
-#define EPOF_BAD_IMG_SIZE 1004 /* POF boot image size invalid */
-#define ERR_BOOTIMG_FAIL  1005 /* 1. stage boot image did not start */
-#define ERR_BOOTSEQ_FAIL  1006 /* 2. stage boot seq handshake timeout */
-#define ERR_POF_TIMEOUT   1007 /* timeout waiting for card pof ready */
-#define ERR_NOT_BOOTED    1008 /* operation only allowed when booted */
-#define ERR_CONF_LONG     1009 /* conf line is too long */ 
-#define ERR_INV_CHAN      1010 /* invalid channel number */ 
-#define ERR_ASYNC_TIME    1011 /* timeout sending async data */ 
-
-
-
-
