From patchwork Wed Nov 13 16:42:25 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dan Murphy X-Patchwork-Id: 1194385 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming-netdev@ozlabs.org Delivered-To: patchwork-incoming-netdev@ozlabs.org Authentication-Results: ozlabs.org; spf=none (no SPF record) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=netdev-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.b="VsGiYHOn"; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 47Cr680W03z9sPk for ; Thu, 14 Nov 2019 03:43:44 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728596AbfKMQnk (ORCPT ); Wed, 13 Nov 2019 11:43:40 -0500 Received: from lelv0142.ext.ti.com ([198.47.23.249]:40230 "EHLO lelv0142.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727168AbfKMQnj (ORCPT ); Wed, 13 Nov 2019 11:43:39 -0500 Received: from lelv0266.itg.ti.com ([10.180.67.225]) by lelv0142.ext.ti.com (8.15.2/8.15.2) with ESMTP id xADGhXJ5086483; Wed, 13 Nov 2019 10:43:33 -0600 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1573663413; bh=vnh+SkUmaagamUe7oJMNSXcvT3/zcQua5Zrl595B/7A=; h=From:To:CC:Subject:Date; b=VsGiYHOnORhnpzFd9coaTYQRcxnNh52JeaAEQKiG6AAmFe+mJEq44bP7Rs/wv0Y2d Ne9/u+EByZy/BESQXf+hVzwSiRymRdWN8AWRF3BecaEjd5wmuLyz1kjjHTCGwZmHYv 1fk4TXnDprPC4+q/kT531ozvEACCfkAJpr/PdRCs= Received: from DLEE109.ent.ti.com (dlee109.ent.ti.com [157.170.170.41]) by lelv0266.itg.ti.com (8.15.2/8.15.2) with ESMTPS id xADGhXhO042259 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Wed, 13 Nov 2019 10:43:33 -0600 Received: from DLEE111.ent.ti.com (157.170.170.22) by DLEE109.ent.ti.com (157.170.170.41) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1847.3; Wed, 13 Nov 2019 10:43:15 -0600 Received: from lelv0327.itg.ti.com (10.180.67.183) by DLEE111.ent.ti.com (157.170.170.22) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1847.3 via Frontend Transport; Wed, 13 Nov 2019 10:43:15 -0600 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0327.itg.ti.com (8.15.2/8.15.2) with ESMTP id xADGhWQc066997; Wed, 13 Nov 2019 10:43:32 -0600 From: Dan Murphy To: , , , CC: , , Dan Murphy , Rob Herring Subject: [PATCH v3 1/2] dt-bindings: net: dp83869: Add TI dp83869 phy Date: Wed, 13 Nov 2019 10:42:25 -0600 Message-ID: <20191113164226.3281-1-dmurphy@ti.com> X-Mailer: git-send-email 2.22.0.214.g8dca754b1e MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org Add dt bindings for the TI dp83869 Gigabit ethernet phy device. Signed-off-by: Dan Murphy CC: Rob Herring --- v3 - Moved dt-bindings header file from patch 2/2 to here .../devicetree/bindings/net/ti,dp83869.yaml | 84 +++++++++++++++++++ include/dt-bindings/net/ti-dp83869.h | 43 ++++++++++ 2 files changed, 127 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/ti,dp83869.yaml create mode 100644 include/dt-bindings/net/ti-dp83869.h diff --git a/Documentation/devicetree/bindings/net/ti,dp83869.yaml b/Documentation/devicetree/bindings/net/ti,dp83869.yaml new file mode 100644 index 000000000000..6fe3e451da8a --- /dev/null +++ b/Documentation/devicetree/bindings/net/ti,dp83869.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2019 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/net/ti,dp83869.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: TI DP83869 ethernet PHY + +allOf: + - $ref: "ethernet-controller.yaml#" + +maintainers: + - Dan Murphy + +description: | + The DP83869HM device is a robust, fully-featured Gigabit (PHY) transceiver + with integrated PMD sublayers that supports 10BASE-Te, 100BASE-TX and + 1000BASE-T Ethernet protocols. The DP83869 also supports 1000BASE-X and + 100BASE-FX Fiber protocols. + This device interfaces to the MAC layer through Reduced GMII (RGMII) and + SGMII The DP83869HM supports Media Conversion in Managed mode. In this mode, + the DP83869HM can run 1000BASE-X-to-1000BASE-T and 100BASE-FX-to-100BASE-TX + conversions. The DP83869HM can also support Bridge Conversion from RGMII to + SGMII and SGMII to RGMII. + + Specifications about the charger can be found at: + http://www.ti.com/lit/ds/symlink/dp83869hm.pdf + +properties: + reg: + maxItems: 1 + + ti,min-output-impedance: + type: boolean + description: | + MAC Interface Impedance control to set the programmable output impedance + to a minimum value (35 ohms). + + ti,max-output-impedance: + type: boolean + description: | + MAC Interface Impedance control to set the programmable output impedance + to a maximum value (70 ohms). + + tx-fifo-depth: + $ref: /schemas/types.yaml#definitions/uint32 + description: | + Transmitt FIFO depth see dt-bindings/net/ti-dp83869.h for values + + rx-fifo-depth: + $ref: /schemas/types.yaml#definitions/uint32 + description: | + Receive FIFO depth see dt-bindings/net/ti-dp83869.h for values + + ti,clk-output-sel: + $ref: /schemas/types.yaml#definitions/uint32 + description: | + Muxing option for CLK_OUT pin see dt-bindings/net/ti-dp83869.h for values. + + ti,op-mode: + $ref: /schemas/types.yaml#definitions/uint32 + description: | + Operational mode for the PHY. If this is not set then the operational + mode is set by the straps. see dt-bindings/net/ti-dp83869.h for values + +required: + - reg + +examples: + - | + #include + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + ethphy0: ethernet-phy@0 { + reg = <0>; + tx-fifo-depth = ; + rx-fifo-depth = ; + ti,op-mode = ; + ti,max-output-impedance = "true"; + ti,clk-output-sel = ; + }; + }; diff --git a/include/dt-bindings/net/ti-dp83869.h b/include/dt-bindings/net/ti-dp83869.h new file mode 100644 index 000000000000..863074be52c7 --- /dev/null +++ b/include/dt-bindings/net/ti-dp83869.h @@ -0,0 +1,43 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Device Tree constants for the Texas Instruments DP83869 PHY + * + * Author: Dan Murphy + * + * Copyright: (C) 2019 Texas Instruments, Inc. + */ + +#ifndef _DT_BINDINGS_TI_DP83869_H +#define _DT_BINDINGS_TI_DP83869_H + +/* PHY CTRL bits */ +#define DP83869_PHYCR_FIFO_DEPTH_3_B_NIB 0x00 +#define DP83869_PHYCR_FIFO_DEPTH_4_B_NIB 0x01 +#define DP83869_PHYCR_FIFO_DEPTH_6_B_NIB 0x02 +#define DP83869_PHYCR_FIFO_DEPTH_8_B_NIB 0x03 + +/* IO_MUX_CFG - Clock output selection */ +#define DP83869_CLK_O_SEL_CHN_A_RCLK 0x0 +#define DP83869_CLK_O_SEL_CHN_B_RCLK 0x1 +#define DP83869_CLK_O_SEL_CHN_C_RCLK 0x2 +#define DP83869_CLK_O_SEL_CHN_D_RCLK 0x3 +#define DP83869_CLK_O_SEL_CHN_A_RCLK_DIV5 0x4 +#define DP83869_CLK_O_SEL_CHN_B_RCLK_DIV5 0x5 +#define DP83869_CLK_O_SEL_CHN_C_RCLK_DIV5 0x6 +#define DP83869_CLK_O_SEL_CHN_D_RCLK_DIV5 0x7 +#define DP83869_CLK_O_SEL_CHN_A_TCLK 0x8 +#define DP83869_CLK_O_SEL_CHN_B_TCLK 0x9 +#define DP83869_CLK_O_SEL_CHN_C_TCLK 0xa +#define DP83869_CLK_O_SEL_CHN_D_TCLK 0xb +#define DP83869_CLK_O_SEL_REF_CLK 0xc + +#define DP83869_RGMII_COPPER_ETHERNET 0x00 +#define DP83869_RGMII_1000_BASE 0x01 +#define DP83869_RGMII_100_BASE 0x02 +#define DP83869_RGMII_SGMII_BRIDGE 0x03 +#define DP83869_1000M_MEDIA_CONVERT 0x04 +#define DP83869_100M_MEDIA_CONVERT 0x05 +#define DP83869_SGMII_COPPER_ETHERNET 0x06 + +#endif +